From: Daniel Golle Date: Fri, 1 Mar 2024 01:59:21 +0000 (+0000) Subject: mediatek: 6.6: drop patches backported as fixes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f4223abd8faa683991a5077f5d01a7e1483629e1;p=openwrt%2Fstaging%2Fthess.git mediatek: 6.6: drop patches backported as fixes Drop patches backported as fixes in later kernel version. Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/patches-6.6/020-v6.7-arm64-dts-mt7986-define-3W-max-power-to-both-SFP-on-.patch b/target/linux/mediatek/patches-6.6/020-v6.7-arm64-dts-mt7986-define-3W-max-power-to-both-SFP-on-.patch deleted file mode 100644 index 8cba3b2059..0000000000 --- a/target/linux/mediatek/patches-6.6/020-v6.7-arm64-dts-mt7986-define-3W-max-power-to-both-SFP-on-.patch +++ /dev/null @@ -1,34 +0,0 @@ -From f8ed4088ed9c61ae92193da6130d04c37e7b19f2 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 20 Aug 2023 17:31:33 +0200 -Subject: [PATCH 20/22] arm64: dts: mt7986: define 3W max power to both SFP on - BPI-R3 - -All SFP power supplies are connected to the system VDD33 which is 3v3/8A. -Set 3A per SFP slot to allow SFPs work which need more power than the -default 1W. - -Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3") -Signed-off-by: Frank Wunderlich ---- - arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -126,6 +126,7 @@ - compatible = "sff,sfp"; - i2c-bus = <&i2c_sfp1>; - los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; -+ maximum-power-milliwatt = <3000>; - mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; -@@ -137,6 +138,7 @@ - i2c-bus = <&i2c_sfp2>; - los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>; -+ maximum-power-milliwatt = <3000>; - tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; - }; diff --git a/target/linux/mediatek/patches-6.6/021-v6.7-arm64-dts-mt7986-change-cooling-trips.patch b/target/linux/mediatek/patches-6.6/021-v6.7-arm64-dts-mt7986-change-cooling-trips.patch deleted file mode 100644 index 20d4468cf0..0000000000 --- a/target/linux/mediatek/patches-6.6/021-v6.7-arm64-dts-mt7986-change-cooling-trips.patch +++ /dev/null @@ -1,59 +0,0 @@ -From aa3d6df9803c267725dc72286bb91602b7579882 Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 20 Aug 2023 17:31:34 +0200 -Subject: [PATCH 21/22] arm64: dts: mt7986: change cooling trips - -Add Critical and hot trips for emergency system shutdown and limiting -system load. - -Change passive trip to active to make sure fan is activated on the -lowest trip. - -Fixes: 1f5be05132f3 ("arm64: dts: mt7986: add thermal-zones") -Suggested-by: Daniel Golle -Signed-off-by: Frank Wunderlich ---- - arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 20 ++++++++++++++++---- - 1 file changed, 16 insertions(+), 4 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi -@@ -610,22 +610,34 @@ - thermal-sensors = <&thermal 0>; - - trips { -+ cpu_trip_crit: crit { -+ temperature = <125000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu_trip_hot: hot { -+ temperature = <120000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ - cpu_trip_active_high: active-high { - temperature = <115000>; - hysteresis = <2000>; - type = "active"; - }; - -- cpu_trip_active_low: active-low { -+ cpu_trip_active_med: active-med { - temperature = <85000>; - hysteresis = <2000>; - type = "active"; - }; - -- cpu_trip_passive: passive { -- temperature = <40000>; -+ cpu_trip_active_low: active-low { -+ temperature = <60000>; - hysteresis = <2000>; -- type = "passive"; -+ type = "active"; - }; - }; - }; diff --git a/target/linux/mediatek/patches-6.6/022-v6.7-arm64-dts-mt7986-change-thermal-trips-on-BPI-R3.patch b/target/linux/mediatek/patches-6.6/022-v6.7-arm64-dts-mt7986-change-thermal-trips-on-BPI-R3.patch deleted file mode 100644 index 7166ab6a14..0000000000 --- a/target/linux/mediatek/patches-6.6/022-v6.7-arm64-dts-mt7986-change-thermal-trips-on-BPI-R3.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 6ddf23526955b8dbedfeaa57e691261fd73f9d4e Mon Sep 17 00:00:00 2001 -From: Frank Wunderlich -Date: Sun, 20 Aug 2023 17:31:35 +0200 -Subject: [PATCH 22/22] arm64: dts: mt7986: change thermal trips on BPI-R3 - -Apply new naming after mt7986 thermal trips were changed. - -Fixes: c26f779a2295 ("arm64: dts: mt7986: add pwm-fan and cooling-maps to BPI-R3 dts") -Suggested-by: Daniel Golle -Signed-off-by: Frank Wunderlich ---- - .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts -@@ -152,16 +152,16 @@ - trip = <&cpu_trip_active_high>; - }; - -- cpu-active-low { -+ cpu-active-med { - /* active: set fan to cooling level 1 */ - cooling-device = <&fan 1 1>; -- trip = <&cpu_trip_active_low>; -+ trip = <&cpu_trip_active_med>; - }; - -- cpu-passive { -- /* passive: set fan to cooling level 0 */ -+ cpu-active-low { -+ /* active: set fan to cooling level 0 */ - cooling-device = <&fan 0 0>; -- trip = <&cpu_trip_passive>; -+ trip = <&cpu_trip_active_low>; - }; - }; - }; diff --git a/target/linux/mediatek/patches-6.6/734-v6.8-net-phy-mediatek-ge-soc-sync-driver-with-MediaTek-SD.patch b/target/linux/mediatek/patches-6.6/734-v6.8-net-phy-mediatek-ge-soc-sync-driver-with-MediaTek-SD.patch deleted file mode 100644 index 5daa62b6b7..0000000000 --- a/target/linux/mediatek/patches-6.6/734-v6.8-net-phy-mediatek-ge-soc-sync-driver-with-MediaTek-SD.patch +++ /dev/null @@ -1,270 +0,0 @@ -From f2195279c234c0f618946424b8236026126bc595 Mon Sep 17 00:00:00 2001 -Message-ID: -From: Daniel Golle -Date: Wed, 24 Jan 2024 02:27:04 +0000 -Subject: [PATCH net] net: phy: mediatek-ge-soc: sync driver with MediaTek SDK -To: Daniel Golle , - Qingfang Deng , - SkyLake Huang , - Andrew Lunn , - Heiner Kallweit , - Russell King , - David S. Miller , - Eric Dumazet , - Jakub Kicinski , - Paolo Abeni , - Matthias Brugger , - AngeloGioacchino Del Regno , - netdev@vger.kernel.org, - linux-kernel@vger.kernel.org, - linux-arm-kernel@lists.infradead.org, - linux-mediatek@lists.infradead.org - -Sync initialization and calibration routines with MediaTek's reference -driver. Improves compliance and resolves link stability issues with -CH340 IoT devices connected to MT798x built-in PHYs. - -Fixes: 98c485eaf509 ("net: phy: add driver for MediaTek SoC built-in GE PHYs") -Signed-off-by: Daniel Golle ---- - drivers/net/phy/mediatek-ge-soc.c | 147 ++++++++++++++++-------------- - 1 file changed, 81 insertions(+), 66 deletions(-) - ---- a/drivers/net/phy/mediatek-ge-soc.c -+++ b/drivers/net/phy/mediatek-ge-soc.c -@@ -491,7 +491,7 @@ static int tx_r50_fill_result(struct phy - u16 reg, val; - - if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988) -- bias = -2; -+ bias = -1; - - val = clamp_val(bias + tx_r50_cal_val, 0, 63); - -@@ -707,6 +707,11 @@ restore: - static void mt798x_phy_common_finetune(struct phy_device *phydev) - { - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */ -+ __phy_write(phydev, 0x11, 0xc71); -+ __phy_write(phydev, 0x12, 0xc); -+ __phy_write(phydev, 0x10, 0x8fae); -+ - /* EnabRandUpdTrig = 1 */ - __phy_write(phydev, 0x11, 0x2f00); - __phy_write(phydev, 0x12, 0xe); -@@ -717,15 +722,56 @@ static void mt798x_phy_common_finetune(s - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x83aa); - -- /* TrFreeze = 0 */ -+ /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */ -+ __phy_write(phydev, 0x11, 0x240); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x9680); -+ -+ /* TrFreeze = 0 (mt7988 default) */ - __phy_write(phydev, 0x11, 0x0); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x9686); - -+ /* SSTrKp100 = 5 */ -+ /* SSTrKf100 = 6 */ -+ /* SSTrKp1000Mas = 5 */ -+ /* SSTrKf1000Mas = 6 */ - /* SSTrKp1000Slv = 5 */ -+ /* SSTrKf1000Slv = 6 */ - __phy_write(phydev, 0x11, 0xbaef); - __phy_write(phydev, 0x12, 0x2e); - __phy_write(phydev, 0x10, 0x968c); -+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+} -+ -+static void mt7981_phy_finetune(struct phy_device *phydev) -+{ -+ u16 val[8] = { 0x01ce, 0x01c1, -+ 0x020f, 0x0202, -+ 0x03d0, 0x03c0, -+ 0x0013, 0x0005 }; -+ int i, k; -+ -+ /* 100M eye finetune: -+ * Keep middle level of TX MLT3 shapper as default. -+ * Only change TX MLT3 overshoot level here. -+ */ -+ for (k = 0, i = 1; i < 12; i++) { -+ if (i % 3 == 0) -+ continue; -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]); -+ } -+ -+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -+ /* ResetSyncOffset = 6 */ -+ __phy_write(phydev, 0x11, 0x600); -+ __phy_write(phydev, 0x12, 0x0); -+ __phy_write(phydev, 0x10, 0x8fc0); -+ -+ /* VgaDecRate = 1 */ -+ __phy_write(phydev, 0x11, 0x4c2a); -+ __phy_write(phydev, 0x12, 0x3e); -+ __phy_write(phydev, 0x10, 0x8fa4); - - /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2, - * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2 -@@ -740,7 +786,7 @@ static void mt798x_phy_common_finetune(s - __phy_write(phydev, 0x10, 0x8ec0); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); - -- /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/ -+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, - MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, - BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9)); -@@ -773,48 +819,6 @@ static void mt798x_phy_common_finetune(s - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222); - } - --static void mt7981_phy_finetune(struct phy_device *phydev) --{ -- u16 val[8] = { 0x01ce, 0x01c1, -- 0x020f, 0x0202, -- 0x03d0, 0x03c0, -- 0x0013, 0x0005 }; -- int i, k; -- -- /* 100M eye finetune: -- * Keep middle level of TX MLT3 shapper as default. -- * Only change TX MLT3 overshoot level here. -- */ -- for (k = 0, i = 1; i < 12; i++) { -- if (i % 3 == 0) -- continue; -- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]); -- } -- -- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */ -- __phy_write(phydev, 0x11, 0xc71); -- __phy_write(phydev, 0x12, 0xc); -- __phy_write(phydev, 0x10, 0x8fae); -- -- /* ResetSyncOffset = 6 */ -- __phy_write(phydev, 0x11, 0x600); -- __phy_write(phydev, 0x12, 0x0); -- __phy_write(phydev, 0x10, 0x8fc0); -- -- /* VgaDecRate = 1 */ -- __phy_write(phydev, 0x11, 0x4c2a); -- __phy_write(phydev, 0x12, 0x3e); -- __phy_write(phydev, 0x10, 0x8fa4); -- -- /* FfeUpdGainForce = 4 */ -- __phy_write(phydev, 0x11, 0x240); -- __phy_write(phydev, 0x12, 0x0); -- __phy_write(phydev, 0x10, 0x9680); -- -- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); --} -- - static void mt7988_phy_finetune(struct phy_device *phydev) - { - u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182, -@@ -829,17 +833,7 @@ static void mt7988_phy_finetune(struct p - /* TCT finetune */ - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5); - -- /* Disable TX power saving */ -- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7, -- MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8); -- - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); -- -- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */ -- __phy_write(phydev, 0x11, 0x671); -- __phy_write(phydev, 0x12, 0xc); -- __phy_write(phydev, 0x10, 0x8fae); -- - /* ResetSyncOffset = 5 */ - __phy_write(phydev, 0x11, 0x500); - __phy_write(phydev, 0x12, 0x0); -@@ -847,13 +841,27 @@ static void mt7988_phy_finetune(struct p - - /* VgaDecRate is 1 at default on mt7988 */ - -- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+ /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7, -+ * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7 -+ */ -+ __phy_write(phydev, 0x11, 0xb90a); -+ __phy_write(phydev, 0x12, 0x6f); -+ __phy_write(phydev, 0x10, 0x8f82); -+ -+ /* RemAckCntLimitCtrl = 1 */ -+ __phy_write(phydev, 0x11, 0xfbba); -+ __phy_write(phydev, 0x12, 0xc3); -+ __phy_write(phydev, 0x10, 0x87f8); - -- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30); -- /* TxClkOffset = 2 */ -- __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK, -- FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2)); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -+ -+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, -+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, -+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa)); -+ -+ /* rg_tr_lpf_cnt_val = 1023 */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x3ff); - } - - static void mt798x_phy_eee(struct phy_device *phydev) -@@ -886,11 +894,11 @@ static void mt798x_phy_eee(struct phy_de - MTK_PHY_LPI_SLV_SEND_TX_EN, - FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120)); - -- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239, -- MTK_PHY_LPI_SEND_LOC_TIMER_MASK | -- MTK_PHY_LPI_TXPCS_LOC_RCV, -- FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117)); -+ /* Keep MTK_PHY_LPI_SEND_LOC_TIMER as 375 */ -+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239, -+ MTK_PHY_LPI_TXPCS_LOC_RCV); - -+ /* This also fixes some IoT issues, such as CH340 */ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7, - MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK, - FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) | -@@ -924,7 +932,7 @@ static void mt798x_phy_eee(struct phy_de - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x9690); - -- /* REG_EEE_st2TrKf1000 = 3 */ -+ /* REG_EEE_st2TrKf1000 = 2 */ - __phy_write(phydev, 0x11, 0x114f); - __phy_write(phydev, 0x12, 0x2); - __phy_write(phydev, 0x10, 0x969a); -@@ -949,7 +957,7 @@ static void mt798x_phy_eee(struct phy_de - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x96b8); - -- /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */ -+ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */ - __phy_write(phydev, 0x11, 0x1463); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x96ca); -@@ -1461,6 +1469,13 @@ static int mt7988_phy_probe(struct phy_d - if (err) - return err; - -+ /* Disable TX power saving at probing to: -+ * 1. Meet common mode compliance test criteria -+ * 2. Make sure that TX-VCM calibration works fine -+ */ -+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7, -+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8); -+ - return mt798x_phy_calibration(phydev); - } - diff --git a/target/linux/mediatek/patches-6.6/830-v6.7-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch b/target/linux/mediatek/patches-6.6/830-v6.7-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch deleted file mode 100644 index 88f383c4ae..0000000000 --- a/target/linux/mediatek/patches-6.6/830-v6.7-44-thermal-drivers-mediatek-Fix-probe-for-THERMAL_V2.patch +++ /dev/null @@ -1,33 +0,0 @@ -From e6f43063f2fe9f08b34797bc6d223f7d63b01910 Mon Sep 17 00:00:00 2001 -From: Markus Schneider-Pargmann -Date: Mon, 18 Sep 2023 12:07:06 +0200 -Subject: [PATCH 39/42] thermal/drivers/mediatek: Fix probe for THERMAL_V2 - -Fix the probe function to call mtk_thermal_release_periodic_ts for -everything != MTK_THERMAL_V1. This was accidentally changed from V1 -to V2 in the original patch. - -Reported-by: Frank Wunderlich -Closes: https://lore.kernel.org/lkml/B0B3775B-B8D1-4284-814F-4F41EC22F532@public-files.de/ -Reported-by: Daniel Lezcano -Closes: https://lore.kernel.org/lkml/07a569b9-e691-64ea-dd65-3b49842af33d@linaro.org/ -Fixes: 33140e668b10 ("thermal/drivers/mediatek: Control buffer enablement tweaks") -Signed-off-by: Markus Schneider-Pargmann -Reviewed-by: AngeloGioacchino Del Regno -Signed-off-by: Daniel Lezcano -Link: https://lore.kernel.org/r/20230918100706.1229239-1-msp@baylibre.com ---- - drivers/thermal/mediatek/auxadc_thermal.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/mediatek/auxadc_thermal.c -+++ b/drivers/thermal/mediatek/auxadc_thermal.c -@@ -1268,7 +1268,7 @@ static int mtk_thermal_probe(struct plat - - mtk_thermal_turn_on_buffer(mt, apmixed_base); - -- if (mt->conf->version != MTK_THERMAL_V2) -+ if (mt->conf->version != MTK_THERMAL_V1) - mtk_thermal_release_periodic_ts(mt, auxadc_base); - - if (mt->conf->version == MTK_THERMAL_V1)