From: Imre Kaloz Date: Mon, 24 Nov 2014 16:00:41 +0000 (+0000) Subject: add initial 3.18 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f3df3bdb26157966ec6425397ef96cd489c631b1;p=openwrt%2Fstaging%2Fyousong.git add initial 3.18 support Signed-off-by: Imre Kaloz SVN-Revision: 43366 --- diff --git a/target/linux/mvebu/config-3.18 b/target/linux/mvebu/config-3.18 new file mode 100644 index 0000000000..ad3b0064ba --- /dev/null +++ b/target/linux/mvebu/config-3.18 @@ -0,0 +1,305 @@ +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_AHCI_MVEBU is not set +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +# CONFIG_CACHE_FEROCEON_L2 is not set +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MVEBU=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +CONFIG_ARMADA_370_CLK=y +CONFIG_ARMADA_370_XP_TIMER=y +CONFIG_ARMADA_XP_CLK=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y +# CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_NR_BANKS=8 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_VIRT_EXT=y +CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_BOUNCE=y +CONFIG_CACHE_L2X0=y +CONFIG_CACHE_PL310=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PJ4B=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_XZ=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" +# CONFIG_DEBUG_LL_UART_8250 is not set +# CONFIG_DEBUG_LL_UART_PL01X is not set +CONFIG_DEBUG_MVEBU_UART=y +# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set +CONFIG_DEBUG_UART_8250=y +# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set +CONFIG_DEBUG_UART_8250_SHIFT=2 +# CONFIG_DEBUG_UART_8250_WORD is not set +CONFIG_DEBUG_UART_PHYS=0xd0012000 +# CONFIG_DEBUG_UART_PL01X is not set +CONFIG_DEBUG_UART_VIRT=0xfec12000 +CONFIG_DEBUG_UNCOMPRESS=y +CONFIG_DEBUG_USER=y +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_ENGINE_RAID=y +CONFIG_DMA_OF=y +CONFIG_DTC=y +# CONFIG_DW_DMAC_CORE is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_EARLY_PRINTK=y +CONFIG_FIXED_PHY=y +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_MVEBU=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_I2C_BOARDINFO=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IOMMU_HELPER=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +# CONFIG_IWMMXT is not set +CONFIG_KTIME_SCALAR=y +CONFIG_LEDS_GPIO=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_370_XP=y +# CONFIG_MACH_ARMADA_375 is not set +# CONFIG_MACH_ARMADA_38X is not set +CONFIG_MACH_ARMADA_XP=y +# CONFIG_MACH_DOVE is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MARVELL_PHY=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MEMORY=y +CONFIG_MIGHT_HAVE_PCI=y +# CONFIG_MLX5_CORE is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_PXA3xx=y +# CONFIG_MTD_SM_COMMON is not set +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_MVEBU_CLK_COMMON=y +CONFIG_MVEBU_CLK_COREDIV=y +CONFIG_MVEBU_CLK_CPU=y +CONFIG_MVEBU_DEVBUS=y +CONFIG_MVEBU_MBUS=y +CONFIG_MVMDIO=y +CONFIG_MVNETA=y +CONFIG_MV_XOR=y +CONFIG_NEED_DMA_MAP_STATE=y +# CONFIG_NEON is not set +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_NO_BOOTMEM=y +CONFIG_NR_CPUS=4 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MVEBU=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_370=y +CONFIG_PINCTRL_ARMADA_XP=y +CONFIG_PINCTRL_MVEBU=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PJ4B_ERRATA_4742=y +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +# CONFIG_PL310_ERRATA_753970 is not set +# CONFIG_PL310_ERRATA_769419 is not set +CONFIG_PLAT_ORION=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_MV is not set +CONFIG_SCHED_HRTICK=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_DW=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_ORION=y +CONFIG_STOP_MACHINE=y +CONFIG_SWIOTLB=y +# CONFIG_SWP_EMULATE is not set +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_STATS=y +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_XZ=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB_SUPPORT=y +# CONFIG_USB_XHCI_MVEBU is not set +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_VFP=y +CONFIG_VFPv3=y +# CONFIG_XEN is not set +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +# CONFIG_ZBUD is not set +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch b/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch new file mode 100644 index 0000000000..cb27ccd621 --- /dev/null +++ b/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -506,6 +506,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ + armada-xp-db.dtb \ + armada-xp-gp.dtb \ + armada-xp-lenovo-ix4-300d.dtb \ ++ armada-xp-mamba.dtb \ + armada-xp-matrix.dtb \ + armada-xp-netgear-rn2120.dtb \ + armada-xp-openblocks-ax3-4.dtb diff --git a/target/linux/mvebu/patches-3.18/002-revert_i2c_delay.patch b/target/linux/mvebu/patches-3.18/002-revert_i2c_delay.patch new file mode 100644 index 0000000000..77dc1a6383 --- /dev/null +++ b/target/linux/mvebu/patches-3.18/002-revert_i2c_delay.patch @@ -0,0 +1,15 @@ +--- a/arch/arm/boot/dts/armada-xp.dtsi ++++ b/arch/arm/boot/dts/armada-xp.dtsi +@@ -43,12 +43,10 @@ + }; + + i2c0: i2c@11000 { +- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; + }; + + i2c1: i2c@11100 { +- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; + }; + diff --git a/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch b/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch new file mode 100644 index 0000000000..cb9f1572d1 --- /dev/null +++ b/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch @@ -0,0 +1,529 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -505,6 +505,15 @@ config LEDS_VERSATILE + This option enabled support for the LEDs on the ARM Versatile + and RealView boards. Say Y to enabled these. + ++config LEDS_TLC59116 ++ tristate "LED driver for TLC59116F dimmer" ++ depends on LEDS_CLASS ++ depends on I2C ++ help ++ This option enables support for Texas Instruments TLC59116F ++ LED controller. It is generally only useful ++ as a platform driver ++ + comment "LED Triggers" + source "drivers/leds/trigger/Kconfig" + +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blink + obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o + obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o + obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o ++obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o + + # LED SPI Drivers + obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o +--- /dev/null ++++ b/drivers/leds/leds-tlc59116.c +@@ -0,0 +1,498 @@ ++/* ++ * Copyright 2014 Belkin Inc. ++ * ++ * Author: Belkin Inc. ++ * ++ * This file is subject to the terms and conditions of version 2 of ++ * the GNU General Public License. See the file COPYING in the main ++ * directory of this archive for more details. ++ * ++ * LED driver for various TLC59116 I2C LED drivers ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* LED select registers determine the source that drives LED outputs */ ++#define TLC59116_LED_OFF 0x0 /* Output LOW */ ++#define TLC59116_LED_ON 0x1 /* Output HI-Z */ ++#define TLC59116_DIM 0x2 /* Dimming */ ++#define TLC59116_BLINK 0x3 /* Blinking */ ++ ++#define TLC59116_PINS 16 ++#define TLC59116_REG_MODE1 0x00 /* Mode register 0 */ ++#define MODE1_RESPON_ADDR_MASK 0xF0 ++#define MODE1_NORMAL_MODE (0 << 4) ++#define MODE1_SPEED_MODE (1 << 4) ++ ++#define TLC59116_REG_MODE2 0x01 /* Mode register 1 */ ++#define MODE2_DIM (0 << 5) ++#define MODE2_BLINK (1 << 5) ++#define MODE2_OCH_STOP (0 << 3) ++#define MODE2_OCH_ACK (1 << 3) ++ ++#define TLC59116_REG_PWM0 0x02 ++#define TLC59116_REG_PWM1 0x03 ++#define TLC59116_REG_PWM2 0x04 ++#define TLC59116_REG_PWM3 0x05 ++#define TLC59116_REG_PWM4 0x06 ++#define TLC59116_REG_PWM5 0x07 ++#define TLC59116_REG_PWM6 0x08 ++#define TLC59116_REG_PWM7 0x09 ++#define TLC59116_REG_PWM8 0x0a ++#define TLC59116_REG_PWM9 0x0b ++#define TLC59116_REG_PWM10 0x0c ++#define TLC59116_REG_PWM11 0x0d ++#define TLC59116_REG_PWM12 0x0e ++#define TLC59116_REG_PWM13 0x0f ++#define TLC59116_REG_PWM14 0x10 ++#define TLC59116_REG_PWM15 0x01 ++ ++#define TLC59116_REG_GRPPWM 0x12 ++#define TLC59116_REG_GRPFREQ 0x13 ++ ++#define TLC59116_PERIOD_MIN 41 /* 41ms */ ++#define TLC59116_PERIOD_MAX 10730 /* 10.73s */ ++ ++#define TLC59116_REG_LEDOUT0 0x14 /* LED [3:0] driver output state registers */ ++#define TLC59116_REG_LEDOUT1 0x15 /* LED [7:4] driver output state registers */ ++#define TLC59116_REG_LEDOUT2 0x16 /* LED [11:8] driver output state registers */ ++#define TLC59116_REG_LEDOUT3 0x17 /* LED [15:12] driver output state registers */ ++ ++#define GPIO0_MASK 0x3 ++ ++#define DEBUG 0 ++ ++#if DEBUG > 1 ++#define led_dbg(fmt, arg...) printk(KERN_DEBUG "tlc59116:%s " fmt "\n", __func__ , ## arg) ++#else ++#define led_dbg(fmt, arg...) ++#endif ++ ++ ++#if DEBUG > 0 ++#define led_info(fmt, arg...) printk("tlc59116:%s " fmt "\n", __func__ , ## arg) ++#else ++#define led_info(fmt, arg...) ++#endif ++ ++enum tlc59116_type { ++ tlc59116, ++}; ++ ++struct tlc59116_chipdef { ++ int bits; ++ u8 slv_addr; /* 7-bit slave address mask */ ++ int slv_addr_shift; /* Number of bits to ignore */ ++}; ++ ++static struct tlc59116_chipdef tlc59116_chipdefs[] = { ++ [tlc59116] = { ++ .bits = 16, ++ .slv_addr = /* 1100xxx */ 0x68, ++ .slv_addr_shift = 3, ++ }, ++}; ++ ++static const struct i2c_device_id tlc59116_id[] = { ++ { "tlc59116", tlc59116 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(i2c, tlc59116_id); ++ ++struct tlc59116_led { ++ struct tlc59116_chipdef *chipdef; ++ struct i2c_client *client; ++ struct work_struct work; ++ spinlock_t lock; ++ enum led_brightness brightness; ++ struct led_classdev led_cdev; ++ int led_num; /* 0 .. 8 potentially */ ++ char name[32]; ++}; ++ ++//#define DUMP_REGS ++ ++#ifdef DUMP_REGS ++void dump_regs(struct i2c_client *client) ++{ ++ int i, j = 0; ++ u8 data; ++ printk ("\n-------------------------------------\n"); ++ for (i = 0; i< 0x20; i++) ++ { ++ data = i2c_smbus_read_byte_data(client, i); ++ printk ("[0x%x] = 0x%x ",i, data); ++ j++; ++ if (j == 5) ++ { ++ printk ("\n"); ++ j = 0; ++ } ++ } ++ printk ("\n"); ++} ++#endif ++ ++static int tlc59116_set_mode(struct i2c_client *client, uint8_t mode) ++{ ++ uint8_t val = 0; ++ ++ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK)) ++ mode = MODE2_DIM; ++ ++ /* Configure MODE1 register */ ++ val &= 0x0; ++ val &= MODE1_RESPON_ADDR_MASK; ++ val |= MODE1_NORMAL_MODE; ++ i2c_smbus_write_byte_data(client, TLC59116_REG_MODE1, val); ++ ++ /* Configure MODE2 Reg */ ++ val &= 0x00; ++ val |= MODE2_OCH_STOP; ++ ++ val |= mode; ++ ++ i2c_smbus_write_byte_data(client, TLC59116_REG_MODE2, val); ++ mdelay(100); ++ ++ return 0; ++} ++ ++static int tlc59116_set_gpio_act(struct i2c_client *client, u8 gpio_no, u8 act_mode) ++{ ++ char data, addr = 0, i; ++ ++ if ((gpio_no >= 0) && (gpio_no < 4)) ++ addr = TLC59116_REG_LEDOUT0; ++ else if ((gpio_no >= 4) && (gpio_no < 8)) ++ addr = TLC59116_REG_LEDOUT1; ++ else if ((gpio_no >= 8) && (gpio_no < 12)) ++ addr = TLC59116_REG_LEDOUT2; ++ else if ((gpio_no >=12 ) && (gpio_no < 16)) ++ addr = TLC59116_REG_LEDOUT3; ++ ++ data = i2c_smbus_read_byte_data(client, addr); ++ ++ i = (gpio_no % 4) * 2; ++ ++ data &= ~(GPIO0_MASK << i); ++ act_mode = act_mode << i; ++ data |= act_mode; ++ ++ if(i2c_smbus_write_byte_data(client, addr, data) != 0) { ++ return -1; ++ } ++ return 0; ++} ++ ++static int tlc59116_set_gpio(struct i2c_client *client, uint8_t gpio_no, uint8_t val) ++{ ++ val &= 0x03; ++ tlc59116_set_gpio_act(client, gpio_no, val); ++#ifdef DUMP_REGS ++ dump_regs(client); ++#endif ++ return 0; ++} ++ ++static int tlc59116_get_gpio(struct i2c_client *client, uint8_t gpio_no) ++{ ++ uint8_t val, reg, data; ++ ++ led_dbg("gpio = %d\n", gpio_no); ++ reg = TLC59116_REG_LEDOUT0; ++ ++ if ((gpio_no >= 0) && (gpio_no < 4)) ++ reg = TLC59116_REG_LEDOUT0; ++ else if ((gpio_no >= 4) && (gpio_no < 8)) { ++ reg = TLC59116_REG_LEDOUT1; ++ gpio_no = gpio_no - 4; ++ } ++ else if ((gpio_no >= 8) && (gpio_no < 12)) { ++ reg = TLC59116_REG_LEDOUT2; ++ gpio_no = gpio_no - 8; ++ } ++ else if ((gpio_no >=12 ) && (gpio_no < 16)) { ++ reg = TLC59116_REG_LEDOUT3; ++ gpio_no = gpio_no - 12; ++ } ++ ++ val = i2c_smbus_read_byte_data(client, reg); ++ ++ data = (val >> (gpio_no * 2)) & 0x03; ++ return data; ++} ++ ++/* ++ * gpio_no [0..7] ++ * duty_cycle [0..99]% ++ * ++ * */ ++static int tlc59116_individual_brighness_control(struct i2c_client *client, uint8_t gpio_no, uint8_t brightness) ++{ ++ uint8_t pwm; ++ ++ pwm = gpio_no + TLC59116_REG_PWM0; ++ i2c_smbus_write_byte_data(client, pwm, brightness); ++ ++ return 0; ++} ++ ++static void tlc59116_led_work(struct work_struct *work) ++{ ++ struct tlc59116_led *tlc59116; ++ ++ tlc59116 = container_of(work, struct tlc59116_led, work); ++ ++ led_dbg("\nbrighness = %d \n", tlc59116->brightness); ++ switch (tlc59116->brightness) { ++ case LED_OFF: ++ led_info("\nLed off\n"); ++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_OFF); ++ break; ++ ++ case LED_FULL: ++ led_info("\nLed on\n"); ++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_ON); ++ break; ++ default: ++ led_info("\nBrightness is %d\n", tlc59116->brightness); ++ if (TLC59116_BLINK != tlc59116_get_gpio(tlc59116->client, tlc59116->led_num)) ++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_DIM); ++ ++ tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness); ++ break; ++ } ++ ++} ++ ++static void tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ struct tlc59116_led *tlc59116; ++ ++ tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev); ++ ++ spin_lock(&tlc59116->lock); ++ tlc59116->brightness = value; ++ ++ /* ++ * Must use workqueue for the actual I/O since I2C operations ++ * can sleep. ++ */ ++ schedule_work(&tlc59116->work); ++ ++ spin_unlock(&tlc59116->lock); ++} ++ ++/* ++ * delay_on, delay_off: units are in ms ++ * ++ */ ++ ++static int tlc59116_set_blink(struct led_classdev *led_cdev, ++ unsigned long *delay_on, ++ unsigned long *delay_off) ++{ ++ struct tlc59116_led *tlc59116; ++ uint16_t period; ++ uint16_t duty_cycle; ++ uint8_t gdc; ++ uint8_t gfrq; ++ ++ tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev); ++ led_info ("Blinking: delay_on = %ldms, delay_off = %ldms, brightness = %d\n", ++ *delay_on, *delay_off, tlc59116->brightness); ++ ++ // Hardware blinking only for tricolor leds . The rest will have software blinking ++ if (tlc59116->led_num > 2) ++ return 1; ++ ++ if ((*delay_on == 0) && (*delay_off ==0)) { ++ spin_lock(&tlc59116->lock); ++ ++ /* MODE2[DMBLNK] = 1 */ ++ tlc59116_set_mode(tlc59116->client, MODE2_BLINK); ++ ++ /* Set LDRx = 11 */ ++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK); ++ ++ tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness); ++ spin_unlock(&tlc59116->lock); ++ return 0; ++ } ++ ++ ++ if ((*delay_on + *delay_off) > TLC59116_PERIOD_MAX) ++ { ++ led_dbg ("Max period is %dms\n", TLC59116_PERIOD_MAX); ++ return -EINVAL; ++ } ++ ++ if ((*delay_on + *delay_off) < TLC59116_PERIOD_MIN) ++ { ++ *delay_on = TLC59116_PERIOD_MIN/2 + 1; ++ *delay_off = TLC59116_PERIOD_MIN/2 + 1; ++ } ++ period = (*delay_on) + (*delay_off); ++ ++ duty_cycle = (100 * (*delay_on)) / period; ++ ++ spin_lock(&tlc59116->lock); ++ ++ /* MODE2[DMBLNK] = 1 */ ++ tlc59116_set_mode(tlc59116->client, MODE2_BLINK); ++ ++ /* Set LDRx = 11 */ ++ tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK); ++ ++ tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness); ++ ++ gdc = (duty_cycle * 256)/100; ++ i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPPWM, gdc); ++ ++ gfrq = (24 * period)/1000 - 1; /* unit is in second (convert from ms to second) */ ++ i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPFREQ, gfrq); ++ ++ ++#ifdef DUMP_REGS ++ dump_regs(tlc59116->client); ++#endif ++ ++ spin_unlock(&tlc59116->lock); ++ return 0; ++} ++ ++static int tlc59116_probe(struct i2c_client *client, ++ const struct i2c_device_id *id) ++{ ++ struct tlc59116_led *tlc59116; ++ struct tlc59116_chipdef *chip; ++ struct i2c_adapter *adapter; ++ struct led_platform_data *pdata; ++ int i, err; ++ ++ chip = &tlc59116_chipdefs[id->driver_data]; ++ adapter = to_i2c_adapter(client->dev.parent); ++ pdata = client->dev.platform_data; ++ ++ /* Make sure the slave address / chip type combo given is possible */ ++ if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) != ++ chip->slv_addr) { ++ dev_err(&client->dev, "invalid slave address %02x\n", ++ client->addr); ++ return -ENODEV; ++ } ++ ++ printk(KERN_INFO "leds-tlc59116: Using %s %d-bit LED driver at " ++ "slave address 0x%02x\n", ++ id->name, chip->bits, client->addr); ++ ++ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) ++ return -EIO; ++ ++ if (pdata) { ++ if (pdata->num_leds != chip->bits) { ++ dev_err(&client->dev, "board info claims %d LEDs" ++ " on a %d-bit chip\n", ++ pdata->num_leds, chip->bits); ++ return -ENODEV; ++ } ++ } ++ ++ tlc59116 = devm_kzalloc(&client->dev, sizeof(*tlc59116) * chip->bits, GFP_KERNEL); ++ if (!tlc59116) ++ return -ENOMEM; ++ ++ i2c_set_clientdata(client, tlc59116); ++ ++ for (i = 0; i < chip->bits; i++) { ++ tlc59116[i].chipdef = chip; ++ tlc59116[i].client = client; ++ tlc59116[i].led_num = i; ++ ++ /* Platform data can specify LED names and default triggers */ ++ if (pdata) { ++ if (pdata->leds[i].name) ++ snprintf(tlc59116[i].name, ++ sizeof(tlc59116[i].name), "tlc59116:%s", ++ pdata->leds[i].name); ++ if (pdata->leds[i].default_trigger) ++ tlc59116[i].led_cdev.default_trigger = ++ pdata->leds[i].default_trigger; ++ } else { ++ snprintf(tlc59116[i].name, sizeof(tlc59116[i].name), ++ "tlc59116:%d", i); ++ } ++ ++ spin_lock_init(&tlc59116[i].lock); ++ ++ tlc59116[i].led_cdev.name = tlc59116[i].name; ++ tlc59116[i].led_cdev.brightness_set = tlc59116_led_set; ++ tlc59116[i].led_cdev.blink_set = tlc59116_set_blink; ++ tlc59116[i].led_cdev.brightness = 0; ++ ++ INIT_WORK(&tlc59116[i].work, tlc59116_led_work); ++ ++ err = led_classdev_register(&client->dev, &tlc59116[i].led_cdev); ++ if (err < 0) ++ goto exit; ++ } ++ ++ tlc59116_set_mode(client, MODE2_DIM); ++ ++ /* Turn off LEDs */ ++ for (i = 0; i < chip->bits; i++) ++ tlc59116_set_gpio(client, i, TLC59116_LED_OFF); ++ ++ return 0; ++ ++exit: ++ while (i--) { ++ led_classdev_unregister(&tlc59116[i].led_cdev); ++ cancel_work_sync(&tlc59116[i].work); ++ } ++ ++ devm_kfree(&client->dev, tlc59116); ++ i2c_set_clientdata(client, NULL); ++ ++ return err; ++} ++ ++static int tlc59116_remove(struct i2c_client *client) ++{ ++ struct tlc59116_led *tlc59116 = i2c_get_clientdata(client); ++ int i; ++ ++ for (i = 0; i < tlc59116->chipdef->bits; i++) { ++ led_classdev_unregister(&tlc59116[i].led_cdev); ++ cancel_work_sync(&tlc59116[i].work); ++ } ++ ++ devm_kfree(&client->dev, tlc59116); ++ i2c_set_clientdata(client, NULL); ++ ++ return 0; ++} ++ ++static struct i2c_driver tlc59116_driver = { ++ .driver = { ++ .name = "leds-tlc59116", ++ .owner = THIS_MODULE, ++ }, ++ .probe = tlc59116_probe, ++ .remove = tlc59116_remove, ++ .id_table = tlc59116_id, ++}; ++ ++module_i2c_driver(tlc59116_driver); ++ ++MODULE_AUTHOR("Belkin Inc."); ++MODULE_DESCRIPTION("TLC59116 LED driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/mvebu/patches-3.18/100-find_active_root.patch b/target/linux/mvebu/patches-3.18/100-find_active_root.patch new file mode 100644 index 0000000000..68826fc4e1 --- /dev/null +++ b/target/linux/mvebu/patches-3.18/100-find_active_root.patch @@ -0,0 +1,153 @@ +The WRT1900AC among other Linksys routers uses a dual-firmware layout. +The bootloader passes the active rootfs in bootargs and also sets the +rootfstype to jffs2 - which is clearly something we don't want. + +Rename both root= and rootfstype= variables to avoid issues and also +use the former to dynamically rename the active partition to "ubi". + + +Signed-off-by: Imre Kaloz + +--- a/arch/arm/boot/compressed/atags_to_fdt.c ++++ b/arch/arm/boot/compressed/atags_to_fdt.c +@@ -66,6 +66,18 @@ static uint32_t get_cell_size(const void + return cell_size; + } + ++static void mangle_bootargs(void *fdt, const char *fdt_cmdline) ++{ ++ char *rootdev; ++ char *rootfs; ++ ++ rootdev = strstr(fdt_cmdline, "root=/dev/mtdblock"); ++ strncpy(rootdev, "uboot_active_root=", 18); ++ ++ rootfs = strstr(fdt_cmdline, "rootfstype"); ++ strncpy(rootfs, "origfstype", 10); ++} ++ + static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) + { + char cmdline[COMMAND_LINE_SIZE]; +@@ -135,6 +147,9 @@ int atags_to_fdt(void *atag_list, void * + + for_each_tag(atag, atag_list) { + if (atag->hdr.tag == ATAG_CMDLINE) { ++ /* Rename the original root= and rootfstype= options */ ++ mangle_bootargs(fdt, ++ atag->u.cmdline.cmdline); + /* Append the ATAGS command line to the device tree + * command line. + * NB: This means that if the same parameter is set in +--- a/arch/arm/boot/compressed/string.c ++++ b/arch/arm/boot/compressed/string.c +@@ -111,6 +111,53 @@ char *strchr(const char *s, int c) + return (char *)s; + } + ++/** ++ * strncpy - Copy a length-limited, %NUL-terminated string ++ * @dest: Where to copy the string to ++ * @src: Where to copy the string from ++ * @count: The maximum number of bytes to copy ++ * ++ * The result is not %NUL-terminated if the source exceeds ++ * @count bytes. ++ * ++ * In the case where the length of @src is less than that of ++ * count, the remainder of @dest will be padded with %NUL. ++ * ++ */ ++char *strncpy(char *dest, const char *src, size_t count) ++{ ++ char *tmp = dest; ++ ++ while (count) { ++ if ((*tmp = *src) != 0) ++ src++; ++ tmp++; ++ count--; ++ } ++ return dest; ++} ++ ++/** ++ * strstr - Find the first substring in a %NUL terminated string ++ * @s1: The string to be searched ++ * @s2: The string to search for ++ */ ++char *strstr(const char *s1, const char *s2) ++{ ++ size_t l1, l2; ++ ++ l2 = strlen(s2); ++ if (!l2) ++ return (char *)s1; ++ l1 = strlen(s1); ++ while (l1 >= l2) { ++ l1--; ++ if (!memcmp(s1, s2, l2)) ++ return (char *)s1; ++ s1++; ++ } ++ return NULL; ++} + #undef memset + + void *memset(void *s, int c, size_t count) +--- a/drivers/mtd/ofpart.c ++++ b/drivers/mtd/ofpart.c +@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d + return of_get_property(pp, "compatible", NULL); + } + ++static int uboot_active_root; ++ + static int parse_ofpart_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + struct mtd_part_parser_data *data) + { + struct device_node *node; + const char *partname; ++ const char *owrtpart = "ubi"; + struct device_node *pp; + int nr_parts, i; + +@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc + (*pparts)[i].offset = of_read_number(reg, a_cells); + (*pparts)[i].size = of_read_number(reg + a_cells, s_cells); + +- partname = of_get_property(pp, "label", &len); +- if (!partname) +- partname = of_get_property(pp, "name", &len); ++ if (uboot_active_root && (i == uboot_active_root)) { ++ partname = owrtpart; ++ } else { ++ partname = of_get_property(pp, "label", &len); ++ ++ if (!partname) ++ partname = of_get_property(pp, "name", &len); ++ } ++ + (*pparts)[i].name = partname; + + if (of_get_property(pp, "read-only", &len)) +@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi + return 0; + } + ++static int __init active_root(char *str) ++{ ++ get_option(&str, &uboot_active_root); ++ ++ if (!uboot_active_root) ++ return 1; ++ ++ return 1; ++} ++ ++__setup("uboot_active_root=", active_root); ++ + static void __exit ofpart_parser_exit(void) + { + deregister_mtd_parser(&ofpart_parser);