From: John Crispin Date: Mon, 17 Aug 2015 05:57:41 +0000 (+0000) Subject: ramips: fix Zbtlink ZBT-WR8305RT board name X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f38db7770779e014909955bd693202ee20042c2e;p=openwrt%2Fstaging%2Fansuel.git ramips: fix Zbtlink ZBT-WR8305RT board name There is another Zbtlink board (ZBT-WA05) supported in ramips target, so use the same naming scheme for ZBT-WR8305RT board and its dts file. Signed-off-by: Piotr Dymacz SVN-Revision: 46614 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index c6bfd7e7a8..bb990c97ed 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -245,10 +245,10 @@ case $board in ucidef_set_led_default "power" "power" "oy:green:power" "1" set_wifi_led "oy:green:wifi" ;; - wr8305rt) - ucidef_set_led_default "power" "power" "wr8305rt:sys" "1" - set_usb_led "wr8305rt:usb" - set_wifi_led "wr8305rt:wifi" + zbt-wr8305rt) + ucidef_set_led_default "power" "power" "zbt-wr8305rt:sys" "1" + set_usb_led "zbt-wr8305rt:usb" + set_wifi_led "zbt-wr8305rt:wifi" ;; wt1520) set_wifi_led "rt2800pci-phy0::radio" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index da1854a415..42447d4d14 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -228,7 +228,7 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "2" "6t" ;; - wr8305rt) + zbt-wr8305rt) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4 6t" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index e63f0df079..019bbbb2a8 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -196,8 +196,8 @@ get_status_led() { wr512-3gn) status_led="wr512:green:wps" ;; - wr8305rt) - status_led="wr8305rt:sys" + zbt-wr8305rt) + status_led="zbt-wr8305rt:sys" ;; whr-300hp2 | \ whr-600d | \ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 7db6d370e8..436ed092e5 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -406,8 +406,8 @@ ramips_board_detect() { *"OY-0001") name="oy-0001" ;; - *"ZBT WR8305RT") - name="wr8305rt" + *"Zbtlink ZBT-WR8305RT") + name="zbt-wr8305rt" ;; *"ZTE Q7") name="zte-q7" diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 8221997a0a..1021123693 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -116,7 +116,7 @@ platform_check_image() { wnce2001 | \ wr512-3gn |\ wr6202 |\ - wr8305rt |\ + zbt-wr8305rt |\ wrtnode |\ oy-0001 |\ wt1520 |\ diff --git a/target/linux/ramips/dts/WR8305RT.dts b/target/linux/ramips/dts/WR8305RT.dts deleted file mode 100644 index 1f3c345bed..0000000000 --- a/target/linux/ramips/dts/WR8305RT.dts +++ /dev/null @@ -1,117 +0,0 @@ -/dts-v1/; - -/include/ "mt7620n.dtsi" - -/ { - compatible = "wr8305rt", "ralink,mt7620n-soc"; - model = "ZBT WR8305RT"; - - palmbus@10000000 { - gpio1: gpio@638 { - status = "okay"; - }; - - gpio3: gpio@688 { - status = "okay"; - }; - - spi@b00 { - status = "okay"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l6405d"; - reg = <0 0>; - linux,modalias = "m25p80", "en25q64"; - spi-max-frequency = <10000000>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; - }; - - ehci@101c0000 { - status = "okay"; - }; - - ohci@101c1000 { - status = "okay"; - }; - - ethernet@10100000 { - mtd-mac-address = <&factory 0x4>; - ralink,port-map = "llllw"; - }; - - wmac@10180000 { - ralink,mtd-eeprom = <&factory 0>; - }; - - pinctrl { - state_default: pinctrl0 { - ephy { - ralink,group = "ephy"; - ralink,function = "ephy"; - }; - - default { - ralink,group = "i2c", "uartf", "spi refclk", "wled"; - ralink,function = "gpio"; - }; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - sys { - label = "wr8305rt:sys"; - gpios = <&gpio1 14 1>; - }; - - lan { - label = "wr8305rt:usb"; - gpios = <&gpio1 15 1>; - }; - - wifi { - label = "wr8305rt:wifi"; - gpios = <&gpio3 0 1>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 1 1>; - linux,code = <0x198>; - }; - }; -}; diff --git a/target/linux/ramips/dts/ZBT-WR8305RT.dts b/target/linux/ramips/dts/ZBT-WR8305RT.dts new file mode 100644 index 0000000000..8c56c158a0 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WR8305RT.dts @@ -0,0 +1,117 @@ +/dts-v1/; + +/include/ "mt7620n.dtsi" + +/ { + compatible = "zbtlink,zbt-wr8305rt", "ralink,mt7620n-soc"; + model = "Zbtlink ZBT-WR8305RT"; + + palmbus@10000000 { + gpio1: gpio@638 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "en25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pinctrl { + state_default: pinctrl0 { + ephy { + ralink,group = "ephy"; + ralink,function = "ephy"; + }; + + default { + ralink,group = "i2c", "uartf", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + sys { + label = "zbt-wr8305rt:sys"; + gpios = <&gpio1 14 1>; + }; + + lan { + label = "zbt-wr8305rt:usb"; + gpios = <&gpio1 15 1>; + }; + + wifi { + label = "zbt-wr8305rt:wifi"; + gpios = <&gpio3 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 409ff26575..6071ae7208 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -876,12 +876,12 @@ Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW2 Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2) Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300) Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U) -Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT) Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020) Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI) Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) +Image/Build/Profile/ZBT-WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wr8305rt,ZBT-WR8305RT) Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) microwrt_mtd_size=16515072 Image/Build/Profile/MicroWRT=$(call BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size)) @@ -910,12 +910,12 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/MLWG2,$(1)) $(call Image/Build/Profile/WMR300,$(1)) $(call Image/Build/Profile/RT-N14U,$(1)) - $(call Image/Build/Profile/WR8305RT,$(1)) $(call Image/Build/Profile/WRTNODE,$(1)) $(call Image/Build/Profile/WT3020,$(1)) $(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1)) $(call Image/Build/Profile/ZTE-Q7,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) + $(call Image/Build/Profile/ZBT-WR8305RT,$(1)) $(call Image/Build/Profile/ArcherC20i,$(1)) $(call Image/Build/Profile/MicroWRT,$(1)) endef