From: Gabor Juhos Date: Thu, 14 Feb 2013 14:55:40 +0000 (+0000) Subject: generic: ar8216: move PHY4 RGMII workaround code out of the loop X-Git-Tag: reboot~11263 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f35c369710959b964e0d16d5c45dd497093df61e;p=openwrt%2Fstaging%2Fblogic.git generic: ar8216: move PHY4 RGMII workaround code out of the loop Signed-off-by: Gabor Juhos SVN-Revision: 35603 --- diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index 97a2cca6c0c8..b34c2a8637dc 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -820,20 +820,20 @@ ar8316_hw_init(struct ar8216_priv *priv) priv->write(priv, AR8316_REG_POSTRIP, newval); + if (priv->port4_phy && + priv->phy->interface == PHY_INTERFACE_MODE_RGMII) { + /* work around for phy4 rgmii mode */ + ar8216_phy_dbg_write(priv, 4, 0x12, 0x480c); + /* rx delay */ + ar8216_phy_dbg_write(priv, 4, 0x0, 0x824e); + /* tx delay */ + ar8216_phy_dbg_write(priv, 4, 0x5, 0x3d47); + msleep(1000); + } + /* Initialize the ports */ bus = priv->mii_bus; for (i = 0; i < 5; i++) { - if ((i == 4) && priv->port4_phy && - priv->phy->interface == PHY_INTERFACE_MODE_RGMII) { - /* work around for phy4 rgmii mode */ - ar8216_phy_dbg_write(priv, i, 0x12, 0x480c); - /* rx delay */ - ar8216_phy_dbg_write(priv, i, 0x0, 0x824e); - /* tx delay */ - ar8216_phy_dbg_write(priv, i, 0x5, 0x3d47); - msleep(1000); - } - /* initialize the port itself */ mdiobus_write(bus, i, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);