From: Denis Efremov Date: Fri, 12 Jul 2019 18:55:20 +0000 (+0300) Subject: floppy: fix div-by-zero in setup_format_params X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f3554aeb991214cbfafd17d55e2bfddb50282e32;p=openwrt%2Fstaging%2Fblogic.git floppy: fix div-by-zero in setup_format_params This fixes a divide by zero error in the setup_format_params function of the floppy driver. Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called. A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible. The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI. The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero. The bug was found by syzkaller. Signed-off-by: Denis Efremov Tested-by: Willy Tarreau Signed-off-by: Linus Torvalds --- diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 9fb9b312ab6b..51246bc9709a 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -2120,6 +2120,9 @@ static void setup_format_params(int track) raw_cmd->kernel_data = floppy_track_buffer; raw_cmd->length = 4 * F_SECT_PER_TRACK; + if (!F_SECT_PER_TRACK) + return; + /* allow for about 30ms for data transport per track */ head_shift = (F_SECT_PER_TRACK + 5) / 6; @@ -3232,6 +3235,8 @@ static int set_geometry(unsigned int cmd, struct floppy_struct *g, /* sanity checking for parameters. */ if (g->sect <= 0 || g->head <= 0 || + /* check for zero in F_SECT_PER_TRACK */ + (unsigned char)((g->sect << 2) >> FD_SIZECODE(g)) == 0 || g->track <= 0 || g->track > UDP->tracks >> STRETCH(g) || /* check if reserved bits are set */ (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_SECTBASEMASK)) != 0)