From: Martin Kelly Date: Fri, 20 Apr 2018 16:54:01 +0000 (-0700) Subject: dt-bindings: iio:imu:mpu6050: support more interrupt types X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f3476e8f6230f5ffd8eebdd5fc0867ae53b75dcc;p=openwrt%2Fstaging%2Fblogic.git dt-bindings: iio:imu:mpu6050: support more interrupt types Document that the hardware supports falling edge, rising edge, level low, and level high interrupt types, rather than just rising edge. The language used is the same as that in st_lsm6dsx.txt. Signed-off-by: Martin Kelly Reviewed-by: Rob Herring Acked-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt index 94941fc43e49..5f4777e8cc9e 100644 --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -12,7 +12,12 @@ Required properties: "invensense,icm20608" - reg : the I2C address of the sensor - interrupt-parent : should be the phandle for the interrupt controller - - interrupts : interrupt mapping for GPIO IRQ + - interrupts: interrupt mapping for IRQ. It should be configured with flags + IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or + IRQ_TYPE_EDGE_FALLING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt client node + bindings. Optional properties: - mount-matrix: an optional 3x3 mounting rotation matrix @@ -25,7 +30,7 @@ Example: compatible = "invensense,mpu6050"; reg = <0x68>; interrupt-parent = <&gpio1>; - interrupts = <18 1>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>; mount-matrix = "-0.984807753012208", /* x0 */ "0", /* y0 */ "-0.173648177666930", /* z0 */ @@ -42,7 +47,7 @@ Example: compatible = "invensense,mpu9250"; reg = <0x68>; interrupt-parent = <&gpio3>; - interrupts = <21 1>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; i2c-gate { #address-cells = <1>; #size-cells = <0>;