From: Fabio Estevam Date: Tue, 15 Oct 2019 16:00:40 +0000 (-0300) Subject: media: imx.rst: Provide a real example for the output format X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f3398f328a5ca8926aee9f5b477d2984ada210a2;p=openwrt%2Fstaging%2Fblogic.git media: imx.rst: Provide a real example for the output format In the i.MX6Q sabreauto pipeline example, it is better to provide a real example for the output format, so do it just like in the previous lines for consistency. Signed-off-by: Fabio Estevam Acked-by: Steve Longerbeam Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst index 3d72e411b93d..36e8d1226ac6 100644 --- a/Documentation/media/v4l-drivers/imx.rst +++ b/Documentation/media/v4l-drivers/imx.rst @@ -547,8 +547,6 @@ This example configures a pipeline to capture from the ADV7180 video decoder, assuming PAL 720x576 input signals, with Motion Compensated de-interlacing. The adv7180 must output sequential or alternating fields (field type 'seq-tb' for PAL, or 'alternate'). -$outputfmt can be any format supported by the ipu1_ic_prpvf entity -at its output pad: .. code-block:: none @@ -565,7 +563,7 @@ at its output pad: media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]" media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]" media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]" - media-ctl -V "'ipu1_ic_prpvf':1 [fmt:$outputfmt field:none]" + media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]" Streaming can then begin on the capture device node at "ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any