From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Thu, 9 May 2019 15:02:36 +0000 (+0200)
Subject: ar71xx: Fix network setup for TP-Link Archer C25 v1
X-Git-Tag: v19.07.0-rc1~643
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f32e05c5413af2718b192e12a11b995a621d2248;p=openwrt%2Fstaging%2Fchunkeey.git

ar71xx: Fix network setup for TP-Link Archer C25 v1

Network for the Archer C25 v1 is set up without switch for no
obvious reason. The LED setup is even done switch-based.

This patch changes network setup so a switch is created.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index b06ec4b5f6..79f9e5505e 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -160,7 +160,6 @@ ar71xx_setup_interfaces()
 	a60|\
 	alfa-ap96|\
 	alfa-nx|\
-	archer-c25-v1|\
 	dr344|\
 	gl-ar150|\
 	gl-ar300m|\
@@ -182,15 +181,6 @@ ar71xx_setup_interfaces()
 	wrtnode2q)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
-	rb-750-r2|\
-	rb-750p-pbr2|\
-	rb-750up-r2|\
-	rb-951ui-2nd|\
-	rb-952ui-5ac2nd)
-		ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
-		ucidef_add_switch "switch0" \
-			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
 	all0258n|\
 	all0315n|\
 	dlan-hotspot|\
@@ -248,6 +238,16 @@ ar71xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
 		;;
+	archer-c25-v1|\
+	rb-750-r2|\
+	rb-750p-pbr2|\
+	rb-750up-r2|\
+	rb-951ui-2nd|\
+	rb-952ui-5ac2nd)
+		ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+		ucidef_add_switch "switch0" \
+			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
 	archer-c58-v1|\
 	archer-c59-v1|\
 	archer-c59-v2|\