From: Jim Cromie Date: Tue, 27 Jun 2006 09:54:23 +0000 (-0700) Subject: [PATCH] chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f31000e573da052b6b8bcc21faff520b4e2eda7a;p=openwrt%2Fstaging%2Fblogic.git [PATCH] chardev: GPIO for SCx200 & PC-8736x: use dev_dbg in common module Use of dev_dbg() and friends is considered good practice. dev_dbg() needs a struct device *devp, but nsc_gpio is only a helper module, so it doesnt have/need its own. To provide devp to the user-modules (scx200 & pc8736x _gpio), we add it to the vtable, and set it during init. Also squeeze nsc_gpio_dump()'s format a little. [ 199.259879] pc8736x_gpio.0: io09: 0x0044 TS OD PUE EDGE LO DEBOUNCE Signed-off-by: Jim Cromie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/char/nsc_gpio.c b/drivers/char/nsc_gpio.c index 929d68486c1a..d0b5d65a73fb 100644 --- a/drivers/char/nsc_gpio.c +++ b/drivers/char/nsc_gpio.c @@ -14,22 +14,27 @@ #include #include #include +#include #include #include #define NAME "nsc_gpio" -void nsc_gpio_dump(unsigned index, u32 config) +void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index) { - printk(KERN_INFO NAME ": GPIO-%02u: 0x%08lx %s %s %s %s %s %s %s\n", - index, (unsigned long)config, - (config & 1) ? "OE" : "TS", /* output-enabled/tristate */ - (config & 2) ? "PP" : "OD", /* push pull / open drain */ - (config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */ - (config & 8) ? "LOCKED" : "", /* locked / unlocked */ - (config & 16) ? "LEVEL" : "EDGE",/* level/edge input */ - (config & 32) ? "HI" : "LO", /* trigger on rise/fall edge */ - (config & 64) ? "DEBOUNCE" : ""); /* debounce */ + /* retrieve current config w/o changing it */ + u32 config = amp->gpio_config(index, ~0, 0); + + /* user requested via 'v' command, so its INFO */ + dev_info(amp->dev, "io%02u: 0x%04x %s %s %s %s %s %s %s\n", + index, config, + (config & 1) ? "OE" : "TS", /* output-enabled/tristate */ + (config & 2) ? "PP" : "OD", /* push pull / open drain */ + (config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */ + (config & 8) ? "LOCKED" : "", /* locked / unlocked */ + (config & 16) ? "LEVEL" : "EDGE",/* level/edge input */ + (config & 32) ? "HI" : "LO", /* trigger on rise/fall edge */ + (config & 64) ? "DEBOUNCE" : ""); /* debounce */ } ssize_t nsc_gpio_write(struct file *file, const char __user *data, @@ -37,6 +42,7 @@ ssize_t nsc_gpio_write(struct file *file, const char __user *data, { unsigned m = iminor(file->f_dentry->d_inode); struct nsc_gpio_ops *amp = file->private_data; + struct device *dev = amp->dev; size_t i; int err = 0; @@ -52,42 +58,41 @@ ssize_t nsc_gpio_write(struct file *file, const char __user *data, amp->gpio_set(m, 1); break; case 'O': - printk(KERN_INFO NAME ": GPIO%d output enabled\n", m); + dev_dbg(dev, "GPIO%d output enabled\n", m); amp->gpio_config(m, ~1, 1); break; case 'o': - printk(KERN_INFO NAME ": GPIO%d output disabled\n", m); + dev_dbg(dev, "GPIO%d output disabled\n", m); amp->gpio_config(m, ~1, 0); break; case 'T': - printk(KERN_INFO NAME ": GPIO%d output is push pull\n", + dev_dbg(dev, "GPIO%d output is push pull\n", m); amp->gpio_config(m, ~2, 2); break; case 't': - printk(KERN_INFO NAME ": GPIO%d output is open drain\n", + dev_dbg(dev, "GPIO%d output is open drain\n", m); amp->gpio_config(m, ~2, 0); break; case 'P': - printk(KERN_INFO NAME ": GPIO%d pull up enabled\n", m); + dev_dbg(dev, "GPIO%d pull up enabled\n", m); amp->gpio_config(m, ~4, 4); break; case 'p': - printk(KERN_INFO NAME ": GPIO%d pull up disabled\n", m); + dev_dbg(dev, "GPIO%d pull up disabled\n", m); amp->gpio_config(m, ~4, 0); break; case 'v': /* View Current pin settings */ - amp->gpio_dump(m); + amp->gpio_dump(amp, m); break; case '\n': /* end of settings string, do nothing */ break; default: - printk(KERN_ERR NAME - ": GPIO-%2d bad setting: chr<0x%2x>\n", m, - (int)c); + dev_err(dev, "io%2d bad setting: chr<0x%2x>\n", + m, (int)c); err++; } } diff --git a/drivers/char/pc8736x_gpio.c b/drivers/char/pc8736x_gpio.c index b16fbef816c2..48ff1fc8b06d 100644 --- a/drivers/char/pc8736x_gpio.c +++ b/drivers/char/pc8736x_gpio.c @@ -207,8 +207,6 @@ static void pc8736x_gpio_change(unsigned index) pc8736x_gpio_set(index, !pc8736x_gpio_get(index)); } -extern void nsc_gpio_dump(unsigned iminor); - static struct nsc_gpio_ops pc8736x_access = { .owner = THIS_MODULE, .gpio_config = pc8736x_gpio_configure, @@ -260,6 +258,7 @@ static int __init pc8736x_gpio_init(void) dev_err(&pdev->dev, "no device found\n"); goto undo_platform_dev_add; } + pc8736x_access.dev = &pdev->dev; /* Verify that chip and it's GPIO unit are both enabled. My BIOS does this, so I take minimum action here diff --git a/drivers/char/scx200_gpio.c b/drivers/char/scx200_gpio.c index 442367b3f5dc..5a280a330401 100644 --- a/drivers/char/scx200_gpio.c +++ b/drivers/char/scx200_gpio.c @@ -35,14 +35,6 @@ static int major = 0; /* default to dynamic major */ module_param(major, int, 0); MODULE_PARM_DESC(major, "Major device number"); -extern void nsc_gpio_dump(unsigned index); - -extern ssize_t nsc_gpio_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos); - -extern ssize_t nsc_gpio_read(struct file *file, char __user *buf, - size_t len, loff_t *ppos); - struct nsc_gpio_ops scx200_access = { .owner = THIS_MODULE, .gpio_config = scx200_gpio_configure, @@ -101,6 +93,9 @@ static int __init scx200_gpio_init(void) if (rc) goto undo_malloc; + /* nsc_gpio uses dev_dbg(), so needs this */ + scx200_access.dev = &pdev->dev; + if (major) rc = register_chrdev_region(dev, num_pins, "scx200_gpio"); else { diff --git a/include/linux/nsc_gpio.h b/include/linux/nsc_gpio.h index 27bf66f73868..135742cfada5 100644 --- a/include/linux/nsc_gpio.h +++ b/include/linux/nsc_gpio.h @@ -22,13 +22,14 @@ struct nsc_gpio_ops { struct module* owner; u32 (*gpio_config) (unsigned iminor, u32 mask, u32 bits); - void (*gpio_dump) (unsigned iminor); + void (*gpio_dump) (struct nsc_gpio_ops *amp, unsigned iminor); int (*gpio_get) (unsigned iminor); void (*gpio_set) (unsigned iminor, int state); void (*gpio_set_high)(unsigned iminor); void (*gpio_set_low) (unsigned iminor); void (*gpio_change) (unsigned iminor); int (*gpio_current) (unsigned iminor); + struct device* dev; /* for dev_dbg() support, set in init */ }; extern ssize_t nsc_gpio_write(struct file *file, const char __user *data, @@ -36,3 +37,6 @@ extern ssize_t nsc_gpio_write(struct file *file, const char __user *data, extern ssize_t nsc_gpio_read(struct file *file, char __user *buf, size_t len, loff_t *ppos); + +extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index); +