From: Tianling Shen Date: Sat, 6 Jul 2024 07:30:31 +0000 (+0800) Subject: mediatek: add ABT ASR3000 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f2f428c6991ba4be7180208c99693d8bb37e082b;p=openwrt%2Fstaging%2Fthess.git mediatek: add ABT ASR3000 support Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: 128 MB SPI-NAND RAM: 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, Mesh Power: DC 12V 1A Gain telnet access: 1. Login into web interface, and download the configuration. 2. Decode and uncompress the configuration: * Enter fakeroot if you are not login as root. base64 -d e-xxxxxxxxxxxx-cfg.tar.gz | tar -zx 3. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'. 4. Edit 'etc/rc.local', insert telnetd command before 'exit 0': ( sleep 3s; /usr/sbin/telnetd; ) & 5. Repack the configuration: tar -zc etc/ | base64 > e-xxxxxxxxxxxx-cfg.tar.gz 6. Upload new configuration via web interface, now you can connect to ASR3000 via telnet. Flash instructions: 1. Connect to ASR3000, backup everything, especially 'Factory' part. 2. Write new BL2: mtd write openwrt-mediatek-filogic-abt_asr3000-preloader.bin BL2 3. Write new FIP: mtd write openwrt-mediatek-filogic-abt_asr3000-bl31-uboot.fip FIP 4. Set static IP on your PC: IP 192.168.1.254/24, GW 192.168.1.1 5. Serve OpenWrt initramfs image using TFTP server. 6. Cut off the power and re-engage, wait for TFTP recovery to complete. 7. After OpenWrt has booted, perform sysupgrade. Signed-off-by: Tianling Shen Link: https://github.com/openwrt/openwrt/pull/15887 Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 67d37931c2..c6d914eb70 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -33,6 +33,21 @@ ubootenv_add_ubi_default() { } case "$board" in +abt,asr3000|\ +h3c,magic-nx30-pro|\ +jcg,q30-pro|\ +netcore,n60|\ +nokia,ea0326gmp|\ +qihoo,360t7|\ +tplink,tl-xdr4288|\ +tplink,tl-xdr6086|\ +tplink,tl-xdr6088|\ +xiaomi,mi-router-ax3000t-ubootmod|\ +xiaomi,mi-router-wr30u-ubootmod|\ +xiaomi,redmi-router-ax6000-ubootmod|\ +zyxel,ex5601-t0-ubootmod) + ubootenv_add_ubi_default + ;; asus,rt-ax59u) ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000" ;; @@ -70,20 +85,6 @@ zbtlink,zbt-z8103ax) dlink,aquila-pro-ai-m30-a1) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000" ;; -h3c,magic-nx30-pro|\ -jcg,q30-pro|\ -netcore,n60|\ -nokia,ea0326gmp|\ -qihoo,360t7|\ -tplink,tl-xdr4288|\ -tplink,tl-xdr6086|\ -tplink,tl-xdr6088|\ -xiaomi,mi-router-ax3000t-ubootmod|\ -xiaomi,mi-router-wr30u-ubootmod|\ -xiaomi,redmi-router-ax6000-ubootmod|\ -zyxel,ex5601-t0-ubootmod) - ubootenv_add_ubi_default - ;; glinet,gl-mt2500|\ glinet,gl-mt6000) local envdev=$(find_mmc_part "u-boot-env") diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index 71b72ba018..d3363ea713 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -219,6 +219,18 @@ define U-Boot/mt7629_rfb UBOOT_CONFIG:=mt7629_rfb endef +define U-Boot/mt7981_abt_asr3000 + NAME:=ABT ASR3000 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=abt_asr3000 + UBOOT_CONFIG:=mt7981_abt_asr3000 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr3 + DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3 +endef + define U-Boot/mt7981_cmcc_rax3000m-emmc NAME:=CMCC RAX3000M BUILD_SUBTARGET:=filogic @@ -734,6 +746,7 @@ UBOOT_TARGETS := \ mt7628_rfb \ mt7628_ravpower_rp-wd009 \ mt7629_rfb \ + mt7981_abt_asr3000 \ mt7981_cmcc_rax3000m-emmc \ mt7981_cmcc_rax3000m-nand \ mt7981_h3c_magic-nx30-pro \ diff --git a/package/boot/uboot-mediatek/patches/444-add-abt_asr3000.patch b/package/boot/uboot-mediatek/patches/444-add-abt_asr3000.patch new file mode 100644 index 0000000000..162e502f1a --- /dev/null +++ b/package/boot/uboot-mediatek/patches/444-add-abt_asr3000.patch @@ -0,0 +1,347 @@ +--- /dev/null ++++ b/configs/mt7981_abt_asr3000_defconfig +@@ -0,0 +1,107 @@ ++CONFIG_ARM=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7981-abt-asr3000" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-abt-asr3000.dtb" ++CONFIG_LOGLEVEL=7 ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_LOG=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7981> " ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_DEFAULT_ENV_FILE="abt_asr3000_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_NETCONSOLE=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_LMB_MAX_REGIONS=64 +--- /dev/null ++++ b/arch/arm/dts/mt7981-abt-asr3000.dts +@@ -0,0 +1,176 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "ABT ASR3000"; ++ compatible = "mediatek,mt7981", "mediatek,mt7981-rfb"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ ++ button-reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>; ++ }; ++ ++ button-wps { ++ label = "mesh"; ++ linux,code = ; ++ linux,input-type = ; ++ gpios = <&gpio 0 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ led-0 { ++ label = "red:wan"; ++ gpios = <&gpio 4 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ }; ++ ++ led-1 { ++ label = "green:wan"; ++ gpios = <&gpio 8 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ }; ++ ++ mesh_led: led-2 { ++ label = "green:mesh"; ++ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ ++ led-3 { ++ label = "green:wlan2g"; ++ gpios = <&gpio 34 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ }; ++ ++ led-4 { ++ label = "green:wlan5g"; ++ gpios = <&gpio 35 GPIO_ACTIVE_LOW>; ++ default-state = "off"; ++ }; ++ }; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <2500>; ++ full-duplex; ++ }; ++}; ++ ++&pinctrl { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "u-boot-env"; ++ reg = <0x100000 0x80000>; ++ }; ++ ++ partition@180000 { ++ label = "art"; ++ reg = <0x180000 0x100000>; ++ }; ++ ++ partition@280000 { ++ label = "factory"; ++ reg = <0x280000 0x100000>; ++ }; ++ ++ partition@380000 { ++ label = "fip"; ++ reg = <0x380000 0x200000>; ++ }; ++ ++ partition@580000 { ++ label = "ubi"; ++ reg = <0x580000 0x7a80000>; ++ compatible = "linux,ubi"; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ mediatek,force-highspeed; ++ status = "okay"; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; +--- /dev/null ++++ b/abt_asr3000_env +@@ -0,0 +1,55 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=root=/dev/fit0 rootwait ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-abt_asr3000-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-abt_asr3000-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-abt_asr3000-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-abt_asr3000-squashfs-sysupgrade.itb ++bootled_pwr=green:mesh ++bootled_rec=green:mesh ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever ++boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 ++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr ++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic || run ubi_format ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" diff --git a/target/linux/mediatek/dts/mt7981b-abt-asr3000.dts b/target/linux/mediatek/dts/mt7981b-abt-asr3000.dts new file mode 100644 index 0000000000..dd07def303 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-abt-asr3000.dts @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include +#include +#include +#include "mt7981.dtsi" + +/ { + model = "ABT ASR3000"; + compatible = "abt,asr3000", "mediatek,mt7981"; + + aliases { + led-boot = &mesh_led; + led-failsafe = &mesh_led; + led-upgrade = &mesh_led; + label-mac-device = &gmac1; + serial0 = &uart0; + }; + + chosen { + rootdisk = <&ubi_rootdisk>; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + reg = <0 0x40000000 0 0x10000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + + button-mesh { + label = "mesh"; + linux,code = ; + linux,input-type = ; + gpios = <&pio 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + + led-1 { + function = LED_FUNCTION_WAN; + color = ; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + + mesh_led: led-2 { + label = "green:mesh"; + gpios = <&pio 15 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + function = LED_FUNCTION_WLAN_2GHZ; + color = ; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + }; + + led-4 { + function = LED_FUNCTION_WLAN_5GHZ; + color = ; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cells = <&macaddr_art_0 0>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + + nvmem-cells = <&macaddr_art_0 0>; + nvmem-cell-names = "mac-address"; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + spi_nand: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "art"; + reg = <0x180000 0x100000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_0: macaddr@0 { + compatible = "mac-base"; + reg = <0x0 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@280000 { + label = "factory"; + reg = <0x280000 0x100000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + }; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + compatible = "linux,ubi"; + label = "ubi"; + reg = <0x580000 0x7a80000>; + + volumes { + ubi_rootdisk: ubi-volume-fit { + volname = "fit"; + }; + }; + }; + }; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 16d8617c54..82f61dd5d9 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -6,6 +6,11 @@ board=$(board_name) board_config_update case $board in +abt,asr3000) + ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" + ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wlan-2ghz" "phy0-ap0" + ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wlan-5ghz" "phy1-ap0" + ;; confiabits,mt7981) ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index c9c8a87f54..8246a3b004 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -11,6 +11,13 @@ mediatek_setup_interfaces() acelink,ew-7886cax) ucidef_set_interface_lan "eth0" "dhcp" ;; + abt,asr3000|\ + cmcc,rax3000m|\ + h3c,magic-nx30-pro|\ + nokia,ea0326gmp|\ + zbtlink,zbt-z8103ax) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1 + ;; acer,predator-w6) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1 ;; @@ -46,12 +53,6 @@ mediatek_setup_interfaces() bananapi,bpi-r4-poe) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 eth1" "wan eth2" ;; - cmcc,rax3000m|\ - h3c,magic-nx30-pro|\ - nokia,ea0326gmp|\ - zbtlink,zbt-z8103ax) - ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1 - ;; comfast,cf-e393ax) ucidef_set_interfaces_lan_wan "lan1" eth1 ;; diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index 98b1023e3e..a16f5e7eb4 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -10,6 +10,13 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in + abt,asr3000) + # Originally, phy1 is phy0 mac with LA bit set. However, this would conflict + # addresses on multiple VIFs with the other radio. Use label mac to set LA bit. + addr=$(cat /sys/class/net/eth1/address) + [ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_setbit_la $addr > /sys${DEVPATH}/macaddress + ;; acer,predator-w6) key_path="/var/qcidata/data" [ "$PHYNBR" = "0" ] && cat $key_path/2gMAC > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 3b1b2f7fa6..4005154db2 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -64,6 +64,22 @@ platform_do_upgrade() { local board=$(board_name) case "$board" in + abt,asr3000|\ + bananapi,bpi-r3|\ + bananapi,bpi-r3-mini|\ + bananapi,bpi-r4|\ + bananapi,bpi-r4-poe|\ + cmcc,rax3000m|\ + jdcloud,re-cp-03|\ + mediatek,mt7988a-rfb|\ + nokia,ea0326gmp|\ + openwrt,one|\ + tplink,tl-xdr4288|\ + tplink,tl-xdr6086|\ + tplink,tl-xdr6088|\ + xiaomi,redmi-router-ax6000-ubootmod) + fit_do_upgrade "$1" + ;; acer,predator-w6|\ smartrg,sdg-8612|\ smartrg,sdg-8614|\ @@ -82,21 +98,6 @@ platform_do_upgrade() { CI_KERNPART="linux" nand_do_upgrade "$1" ;; - bananapi,bpi-r3|\ - bananapi,bpi-r3-mini|\ - bananapi,bpi-r4|\ - bananapi,bpi-r4-poe|\ - cmcc,rax3000m|\ - jdcloud,re-cp-03|\ - mediatek,mt7988a-rfb|\ - nokia,ea0326gmp|\ - openwrt,one|\ - tplink,tl-xdr4288|\ - tplink,tl-xdr6086|\ - tplink,tl-xdr6088|\ - xiaomi,redmi-router-ax6000-ubootmod) - fit_do_upgrade "$1" - ;; cudy,re3000-v1|\ cudy,wr3000-v1|\ yuncore,ax835) diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 94b3098b3d..aa844671e3 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -105,6 +105,30 @@ define Build/cetron-header rm $@.tmp endef +define Device/abt_asr3000 + DEVICE_VENDOR := ABT + DEVICE_MODEL := ASR3000 + DEVICE_DTS := mt7981b-abt-asr3000 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3 + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot abt_asr3000 +endef +TARGET_DEVICES += abt_asr3000 + define Device/acelink_ew-7886cax DEVICE_VENDOR := Acelink DEVICE_MODEL := EW-7886CAX