From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue, 13 Jan 2015 17:16:41 +0000 (-0700)
Subject: staging: comedi: ni_labpc_isadma: move dma programming out of labpc_drain_dma()
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f2c6bbe8e02d589a02282c2a260f912ab4f12376;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: ni_labpc_isadma: move dma programming out of labpc_drain_dma()

The external caller of labpc_drain_dma() does not enable the DMA transfer. Only
the call from handle_isa_dma() results in the programmed DMA operation getting
enabled.

For aesthetics, move the dma programming to handle_isa_dma(). Make sure the
DMA operation would actually do something (dma->size != 0) before programming
it to avoid enabling the DMA at the end of a stop_src == TRIG_COUNT command.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/ni_labpc_isadma.c b/drivers/staging/comedi/drivers/ni_labpc_isadma.c
index 2fb7e728049b..af13f4b37daa 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_isadma.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_isadma.c
@@ -109,7 +109,6 @@ void labpc_drain_dma(struct comedi_device *dev)
 	unsigned int residue;
 	unsigned int nsamples;
 	unsigned int leftover;
-	unsigned long flags;
 
 	/*
 	 * residue is the number of bytes left to be done on the dma
@@ -139,13 +138,6 @@ void labpc_drain_dma(struct comedi_device *dev)
 	dma->size = comedi_samples_to_bytes(s, leftover);
 
 	comedi_buf_write_samples(s, dma->virt_addr, nsamples);
-
-	/* set address and count for next transfer */
-	flags = claim_dma_lock();
-	set_dma_mode(dma->chan, DMA_MODE_READ);
-	set_dma_addr(dma->chan, dma->hw_addr);
-	set_dma_count(dma->chan, dma->size);
-	release_dma_lock(flags);
 }
 EXPORT_SYMBOL_GPL(labpc_drain_dma);
 
@@ -153,10 +145,18 @@ static void handle_isa_dma(struct comedi_device *dev)
 {
 	struct labpc_private *devpriv = dev->private;
 	struct labpc_dma_desc *dma = &devpriv->dma_desc;
+	unsigned long flags;
 
 	labpc_drain_dma(dev);
 
-	enable_dma(dma->chan);
+	if (dma->size) {
+		flags = claim_dma_lock();
+		set_dma_mode(dma->chan, DMA_MODE_READ);
+		set_dma_addr(dma->chan, dma->hw_addr);
+		set_dma_count(dma->chan, dma->size);
+		enable_dma(dma->chan);
+		release_dma_lock(flags);
+	}
 
 	/* clear dma tc interrupt */
 	devpriv->write_byte(dev, 0x1, DMATC_CLEAR_REG);