From: Jouni Hogander Date: Wed, 28 Jan 2009 02:44:38 +0000 (-0700) Subject: [ARM] OMAP3: PM: Emu_pwrdm is switched off by hardware even when sdti is in use X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f266950d0234599cc6d4a5602e43d0fb782de1d2;p=openwrt%2Fstaging%2Fblogic.git [ARM] OMAP3: PM: Emu_pwrdm is switched off by hardware even when sdti is in use Using sdti doesn't keep emu_pwrdm on if hardware supervised pwrdm transitions are used. This causes sdti stop to work when power management is initialized and hardware supervised pwrdm control is enabled. This patch disables hardware supervised pwrdm control for emu_pwrdm. Now emu_pwrdm is switched off on boot by software when it is not used. Signed-off-by: Jouni Hogander Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h index 9eb734328107..d7db796403dc 100644 --- a/arch/arm/mach-omap2/clockdomains.h +++ b/arch/arm/mach-omap2/clockdomains.h @@ -248,10 +248,14 @@ static struct clockdomain per_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; +/* + * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is + * switched of even if sdti is in use + */ static struct clockdomain emu_clkdm = { .name = "emu_clkdm", .pwrdm = { .name = "emu_pwrdm" }, - .flags = CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_SWSUP, + .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP, .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), };