From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sun, 18 Jul 2021 21:51:12 +0000 (+0200)
Subject: watchdog: Add an info message if the watchdog reset the system
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f26233edb6a550bf23d51d5d4c864baf093e46e1;p=project%2Fprocd.git

watchdog: Add an info message if the watchdog reset the system

The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
Investigating why a device has rebooted can be difficult, especially if
there's no output (for example during a kernel crash) on the serial
console. Some watchdog drivers can tell us if the watchdog has caused
the system to reboot. The corresponding WDIOF_CARDRESET flag is
documented as: "Card previously reset the CPU".

Add an info message if the watchdog supports the WDIOF_CARDRESET flag
and if the boot status indicates that the watchdog has previously reset
the system.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---

diff --git a/watchdog.c b/watchdog.c
index 9d770b4..39ae9ff 100644
--- a/watchdog.c
+++ b/watchdog.c
@@ -93,6 +93,35 @@ static int watchdog_set_drv_timeout(void)
 	return ioctl(wdt_fd, WDIOC_SETTIMEOUT, &wdt_drv_timeout);
 }
 
+static void watchdog_print_status(void)
+{
+	struct watchdog_info wdt_info;
+	int bootstatus;
+
+	if (wdt_fd < 0)
+		return;
+
+	if (ioctl(wdt_fd, WDIOC_GETSUPPORT, &wdt_info)) {
+		DEBUG(2, "Watchdog GETSUPPORT failed\n");
+		return;
+	}
+
+	if (!(wdt_info.options & WDIOF_CARDRESET)) {
+		DEBUG(2, "Watchdog does not have CARDRESET support\n");
+		return;
+	}
+
+	if (ioctl(wdt_fd, WDIOC_GETBOOTSTATUS, &bootstatus)) {
+		DEBUG(2, "Watchdog GETBOOTSTATUS failed\n");
+		return;
+	}
+
+	if (bootstatus & WDIOF_CARDRESET)
+		LOG("Watchdog has previously reset the system\n");
+	else
+		DEBUG(2, "Watchdog did not previously reset the system\n");
+}
+
 void watchdog_set_magicclose(bool val)
 {
 	wdt_magicclose = val;
@@ -170,6 +199,8 @@ void watchdog_init(int preinit)
 	watchdog_timeout_cb(&wdt_timeout);
 
 	DEBUG(4, "Opened watchdog with timeout %ds\n", watchdog_timeout(0));
+
+	watchdog_print_status();
 }