From: Usama Nassir Date: Fri, 19 May 2023 00:35:51 +0000 (+0300) Subject: ramips: Add support for ComFast CF-E390AX X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f24c9b9d863c2635e472e83028d28cc8d0a7c7c6;p=openwrt%2Fstaging%2Fxback.git ramips: Add support for ComFast CF-E390AX Add support for ComFast CF-E390AX. It is a 802.11 wifi6 cieling AP, based on MediaTek MT7261AT. Specifications: SoC: MediaTek MT7621AT RAM: 128 MiB Flash: 16 MiB NOR (Macronix mx25l12805d) Wireless: MT7915E (2.4G) 802.11ax/b/g/n MT7915E (5G) 802.11ac/ax/n Ethernet: 2 x 1Gbs Button: 1 x "Reset" button LED: 1x Blue LED + 1x Red LED + 1x green LED Power: PoE Manufacturer Page: http://en.comfast.com.cn/index.php?m=content&c=index&a=show&catid=84&id=75 Flash Layout: 0x000000000000-0x000000030000 : "bootloader" 0x000000030000-0x000000040000 : "config" 0x000000050000-0x000000060000 : "factory" 0x000000090000-0x000001000000 : "firmware" First install: 1. Set device into http firmware fail safe upload mode by pressing the reset button for 10 seconds while powering it on. Once the LED stops flashing, safe mode will be running. 2. Set PC IP address to 192.168.1.2 3. Browse to 192.168.1.1 and upload the factory image using the web interface. Signed-off-by: Usama Nassir --- diff --git a/target/linux/ramips/dts/mt7621_comfast_cf-e390ax.dts b/target/linux/ramips/dts/mt7621_comfast_cf-e390ax.dts new file mode 100644 index 0000000000..80600470e7 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_comfast_cf-e390ax.dts @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + compatible = "comfast,cf-e390ax", "mediatek,mt7621-soc"; + model = "COMFAST CF-E390AX"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: status_blue { + label = "blue:status"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + led_status_red: status_red { + label = "red:status"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + }; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_blue; + led-upgrade = &led_status_red; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <14000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@50000 { + label = "factory"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@90000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x90000 0xf70000>; + }; + }; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_e000: macaddr@e000 { + reg = <0xe000 0x6>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "wan"; + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + }; + + port@4 { + status = "okay"; + label = "lan"; + }; + }; +}; + diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 4dc7607126..92053e087c 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -501,6 +501,20 @@ define Device/bolt_arion endef TARGET_DEVICES += bolt_arion +define Device/comfast_cf-e390ax + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 15808k + DEVICE_VENDOR := ComFast + DEVICE_MODEL := CF-E390AX + DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools + IMAGES += factory.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ + check-size | append-metadata + IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size +endef +TARGET_DEVICES += comfast_cf-e390ax + define Device/cudy_m1800 $(Device/dsa-migration) DEVICE_VENDOR := Cudy diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 180713d964..a5671af82f 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -143,6 +143,9 @@ ramips_setup_interfaces() ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0" ;; + comfast,cf-e390ax) + ucidef_set_interfaces_lan_wan "lan" "wan" + ;; *) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; @@ -186,6 +189,11 @@ ramips_setup_macs() lan_mac=$wan_mac label_mac=$wan_mac ;; + comfast,cf-e390ax) + lan_mac=$(cat /sys/class/net/eth0/address) + label_mac=$lan_mac + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; dlink,dir-860l-b1) lan_mac=$(mtd_get_mac_ascii factory lanmac) wan_mac=$(mtd_get_mac_ascii factory wanmac) diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index b36ac028b0..351aa396e9 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -27,6 +27,10 @@ case "$board" in hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28) [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress ;; + comfast,cf-e390ax) + [ "$PHYNBR" = "0" ] && echo -n "$(mtd_get_mac_binary factory 0x0004)" > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && echo -n "$(mtd_get_mac_binary factory 0x8004)" > /sys${DEVPATH}/macaddress + ;; cudy,x6-v1|\ cudy,x6-v2) hw_mac_addr="$(mtd_get_mac_binary bdinfo 0xde00)"