From: Olliver Schinagl Date: Tue, 20 Sep 2022 10:01:48 +0000 (+0200) Subject: realtek: Convert incorrect v5.10 patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f1f97db627b2;p=openwrt%2Fstaging%2Fdangole.git realtek: Convert incorrect v5.10 patches OpenWRT's developer guide prefers having actual patches so they an be sent upstream more easily. However, in this case, Adding proper fields also allows for `git am` to properly function. Some of these patches are quite old, and lack much traceable history. This commit tries to rectify that, by digging in the history to find where and how it was first added. It is by no means perfect and also shows some patches that should have been long gone. Signed-off-by: Olliver Schinagl --- diff --git a/target/linux/realtek/patches-5.10/007-5.16-gpio-realtek-realtek-otto-fix-gpio-line-irq-offset.patch b/target/linux/realtek/patches-5.10/007-5.16-gpio-realtek-realtek-otto-fix-gpio-line-irq-offset.patch index f1f739d470..9935c57257 100644 --- a/target/linux/realtek/patches-5.10/007-5.16-gpio-realtek-realtek-otto-fix-gpio-line-irq-offset.patch +++ b/target/linux/realtek/patches-5.10/007-5.16-gpio-realtek-realtek-otto-fix-gpio-line-irq-offset.patch @@ -1,4 +1,5 @@ -gpio: realtek-otto: fix GPIO line IRQ offset +From: Sander Vanheule +Subject: gpio: realtek-otto: fix GPIO line IRQ offset The irqchip uses one domain for all GPIO lines, so th line offset should be determined w.r.t. the first line of the first port, not the first line of the diff --git a/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch b/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch index 87ab1a7543..591b157d40 100644 --- a/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch +++ b/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch @@ -1,3 +1,18 @@ +From fce11f68491b46b93df69de0630cd9edb90bc772 Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Wed, 29 Dec 2021 21:54:21 +0100 +Subject: [PATCH] realtek: Create 4 different Realtek Platforms + +Creates RTL83XX as a basic kernel config parameter for the +RTL838X, RTL839x, RTL930X and RTL931X platforms with respective +configurations for the SoCs, which are introduced in addition. + +Submitted-by: Birger Koblitz +--- + arch/mips/Kbuild.platforms | 1 + + arch/mips/Kconfig | 57 ++++++++++++++ + 2 files changed, 58 insertions(+) + --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -23,6 +23,7 @@ platform-$(CONFIG_PIC32MZDA) += pic32/ diff --git a/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch b/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch index 9175b55e8e..2725651243 100644 --- a/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch +++ b/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch @@ -1,3 +1,28 @@ +From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 26 Nov 2020 12:02:21 +0100 +Subject: [PATCH] realtek: update the tree to the latest refactored version +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +* rename the target to realtek +* add refactored DSA driver +* add latest gpio driver +* lots of arch cleanups +* new irq driver +* additional boards + +Submitted-by: Bert Vermeulen +Submitted-by: Birger Koblitz +Submitted-by: Sander Vanheule +Submitted-by: Bjørn Mork +Submitted-by: John Crispin +--- + drivers/gpio/Kconfig | 6 ++++++ + drivers/gpio/Makefile | 1 + + 2 files changed, 7 insertions(+) + --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -508,6 +508,12 @@ config GPIO_REG diff --git a/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch b/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch index b6678e71fe..5f0986b905 100644 --- a/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch +++ b/target/linux/realtek/patches-5.10/303-gpio-update-dependencies-for-gpio-realtek-otto.patch @@ -1,3 +1,16 @@ +From 9bac1c20b8f39f2e0e342b087add5093b94feaed Mon Sep 17 00:00:00 2001 +From: INAGAKI Hiroshi +Date: Wed, 5 May 2021 22:05:39 +0900 +Subject: realtek: backport gpio-realtek-otto driver from 5.13 to 5.10 + +This patch backports "gpio-realtek-otto" driver to Kernel 5.10. +"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" +is used in OpenWrt, so update the dependency by the additional patch. + +Submitted-by: INAGAKI Hiroshi +--- + drivers/gpio/Kconfig | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -491,8 +491,8 @@ config GPIO_RDA diff --git a/target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch b/target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch index 2d8cf9e7cb..23c5448aa2 100644 --- a/target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch +++ b/target/linux/realtek/patches-5.10/304-spi-update-dependency-for-spi-realtek-rtl.patch @@ -1,3 +1,17 @@ +From 0b000cbfe0aa0323bffa855ef8449c0687a4c071 Mon Sep 17 00:00:00 2001 +From: INAGAKI Hiroshi +Date: Thu, 6 May 2021 19:30:58 +0900 +Subject: realtek: backport spi-realtek-rtl driver from 5.12 to 5.10 + +This patch backports "spi-realtek-rtl" driver to Kernel 5.10 from 5.12. +"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" +is used in OpenWrt, so update the dependency by the additional patch. + +Submitted-by: INAGAKI Hiroshi +--- + drivers/spi/Makefile | 2 +- + 1 files changed, 1 insertion(+), 1 deletion(-) + --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -94,7 +94,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom diff --git a/target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch b/target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch index ebab9792fc..0c1cc4235e 100644 --- a/target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch +++ b/target/linux/realtek/patches-5.10/305-irqchip-update-dependency-for-irq-realtek-rtl.patch @@ -1,3 +1,17 @@ +From 2cd00b51470a30198b048a5fca48a04db77e29cc Mon Sep 17 00:00:00 2001 +From: INAGAKI Hiroshi +Date: Fri, 21 May 2021 23:16:37 +0900 +Subject: [PATCH] realtek: backport irq-realtek-rtl driver from 5.12 to 5.10 + +This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12. +"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" +is used in OpenWrt, so update the dependency by the additional patch. + +Submitted-by: INAGAKI Hiroshi +--- + drivers/irqchip/Makefile | 2 +- + 1 files changed, 1 insertion(+), 1 deletion(-) + --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -114,4 +114,4 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-l diff --git a/target/linux/realtek/patches-5.10/307-wdt-update-dependency-for-realtek-otto-wdt.patch b/target/linux/realtek/patches-5.10/307-wdt-update-dependency-for-realtek-otto-wdt.patch index 0b8699c130..f92981340b 100644 --- a/target/linux/realtek/patches-5.10/307-wdt-update-dependency-for-realtek-otto-wdt.patch +++ b/target/linux/realtek/patches-5.10/307-wdt-update-dependency-for-realtek-otto-wdt.patch @@ -1,3 +1,20 @@ +From b8fc5eecdc5d33cf261986436597b5482ab856da Mon Sep 17 00:00:00 2001 +From: Sander Vanheule +Date: Sun, 14 Nov 2021 19:45:32 +0100 +Subject: [PATCH] realtek: Backport Realtek Otto WDT driver + +Add patch submitted upstream to linux-watchdog and replace the MIPS +architecture symbols. Requires one extra patch for the DIV_ROUND_* +macros, which have moved to a different header since 5.10. + +Submitted-by: Sander Vanheule +Tested-by: Stijn Segers +Tested-by: Paul Fertser +Tested-by: Stijn Tintel +--- + drivers/watchdog/Kconfig | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -997,10 +997,10 @@ config RTD119X_WATCHDOG diff --git a/target/linux/realtek/patches-5.10/308-otto-wdt-fix-missing-math-header.patch b/target/linux/realtek/patches-5.10/308-otto-wdt-fix-missing-math-header.patch index 0fb61b9df5..78b145617f 100644 --- a/target/linux/realtek/patches-5.10/308-otto-wdt-fix-missing-math-header.patch +++ b/target/linux/realtek/patches-5.10/308-otto-wdt-fix-missing-math-header.patch @@ -1,3 +1,20 @@ +From b8fc5eecdc5d33cf261986436597b5482ab856da Mon Sep 17 00:00:00 2001 +From: Sander Vanheule +Date: Sun, 14 Nov 2021 19:45:32 +0100 +Subject: [PATCH] realtek: Backport Realtek Otto WDT driver + +Add patch submitted upstream to linux-watchdog and replace the MIPS +architecture symbols. Requires one extra patch for the DIV_ROUND_* +macros, which have moved to a different header since 5.10. + +Submitted-by: Sander Vanheule +Tested-by: Stijn Segers +Tested-by: Paul Fertser +Tested-by: Stijn Tintel +--- + drivers/watchdog/realtek_otto_wdt.c | 2 +- + 1 files changed, 1 insertion(+), 1 deletion(-) + --- a/drivers/watchdog/realtek_otto_wdt.c +++ b/drivers/watchdog/realtek_otto_wdt.c @@ -21,7 +21,7 @@ diff --git a/target/linux/realtek/patches-5.10/309-cevt-rtl9300-support.patch b/target/linux/realtek/patches-5.10/309-cevt-rtl9300-support.patch index 2b9102633e..93d69c07cf 100644 --- a/target/linux/realtek/patches-5.10/309-cevt-rtl9300-support.patch +++ b/target/linux/realtek/patches-5.10/309-cevt-rtl9300-support.patch @@ -1,3 +1,24 @@ +From 775d903216a08c2a8009863d2f9c33f62657ba94 Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Thu, 6 Jan 2022 20:27:01 +0100 +Subject: [PATCH] realtek: Replace the RTL9300 generic timer with a CEVT timer + +The RTL9300 has a broken R4K MIPS timer interrupt, however, the +R4K clocksource works. We replace the RTL9300 timer with a +Clock Event Timer (CEVT), which is VSMP aware and can be instantiated +as part of brining a VSMTP cpu up instead of the R4K CEVT source. +For this we place the RTL9300 CEVT timer in arch/mips/kernel +together with other MIPS CEVT timers, initialize the SoC IRQs +from a modified smp-mt.c and instantiate each timer as part +of the MIPS time setup in arch/mips/include/asm/time.h instead +of the R4K CEVT, similarly as is done by other MIPS CEVT timers. + +Submitted-by: Birger Koblitz +--- + arch/mips/kernel/Makefile | 1 + + arch/mips/include/asm/time.h | 7 +++++++ + 2 files changed, 8 insertions(+) + --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm14 diff --git a/target/linux/realtek/patches-5.10/310-add-i2c-rtl9300-support.patch b/target/linux/realtek/patches-5.10/310-add-i2c-rtl9300-support.patch index c4d23d90e1..4df9bf043b 100644 --- a/target/linux/realtek/patches-5.10/310-add-i2c-rtl9300-support.patch +++ b/target/linux/realtek/patches-5.10/310-add-i2c-rtl9300-support.patch @@ -1,3 +1,20 @@ +From 63a0a4d85bc900464c5b046b13808a582345f8c8 Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Sat, 11 Dec 2021 20:14:47 +0100 +Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C controller + +This adds support for the RTL9300 and RTL9310 I2C controller. +The controller implements the SMBus protocol for SMBus transfers +over an I2C bus. The driver supports selecting one of the 2 possible +SCL pins and any of the 8 possible SDA pins. Bus speeds of +100kHz (standard speed) and 400kHz (high speed I2C) are supported. + +Submitted-by: Birger Koblitz +--- + drivers/i2c/busses/Kconfig | 10 +++++++++ + drivers/i2c/busses/Makefile | 1 + + 2 files changed, 11 insertions(+) + --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -954,6 +954,16 @@ config I2C_RK3X diff --git a/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch b/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch index 0204643d02..d0bfba4538 100644 --- a/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch +++ b/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch @@ -1,3 +1,22 @@ +From f4bdb7fdccdfe3fa382abe77f72a16c2f2e6add0 Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Sat, 11 Dec 2021 20:25:37 +0100 +Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C multiplexing + +The RTL9300/RTL9310 I2C controllers have support for 2 independent I2C +masters, each with a fixed SCL pin, that cannot be changed. Each of these +masters can use 8 (RTL9300) or 16 (RTL9310) different pins for SDA. +This multiplexer directly controls the two masters and their shared +IO configuration registers to allow multiplexing between any of these +busses. The two masters cannot be used in parallel as the multiplex +is protected by a standard multiplex lock. + +Submitted-by: Birger Koblitz +--- + drivers/i2c/muxes/Kconfig | 9 +++++++ + drivers/i2c/muxes/Makefile | 1 + + 2 files changed, 10 insertions(+) + --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -99,6 +99,15 @@ config I2C_MUX_REG diff --git a/target/linux/realtek/patches-5.10/312-rt9313-support.patch b/target/linux/realtek/patches-5.10/312-rt9313-support.patch index 665dbe3e1c..516bca2b6e 100644 --- a/target/linux/realtek/patches-5.10/312-rt9313-support.patch +++ b/target/linux/realtek/patches-5.10/312-rt9313-support.patch @@ -1,3 +1,19 @@ +From 0b8dfe085180b58b81d2657c76b080168e3bc8df Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Wed, 19 Jan 2022 18:14:02 +0100 +Subject: [PATCH] realtek: Add RTL931X sub-target + +We add the RTL931X sub-target with kernel configuration for +a dual core MIPS InterAptive CPU. + +Submitted-by: Sebastian Gottschall +Submitted-by: Birger Koblitz +--- + arch/mips/Makefile | 10 +++++++++++++-- + arch/mips/kernel/head.S | 4 ++++ + aarch/mips/kernel/vmlinux.lds.S | 4 ++++ + 3 files changed, 18 insertions(+), 2 deletions(-) + --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -307,14 +307,24 @@ endif diff --git a/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch b/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch index 09252068b2..26c36302c2 100644 --- a/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch +++ b/target/linux/realtek/patches-5.10/315-irqchip-irq-realtek-rtl-add-VPE-support.patch @@ -1,3 +1,17 @@ +From 6c18e9c491959ac0674ebe36b09f9ddc3f2c9bce Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Fri, 31 Dec 2021 11:56:49 +0100 +Subject: [PATCH] realtek: Add VPE support for the IRQ driver + +In order to support VSMP, enable support for both VPEs +of the RTL839X and RTL930X SoCs in the irq-realtek-rtl +driver. Add support for IRQ affinity setting. + +Submitted-by: Birger Koblitz +--- + drivers/irqchip/irq-realtek-rtl.c | 152 +++++++++++++++--- + 1 file changed, 73 insertions(+), 76 deletions(-) + --- a/drivers/irqchip/irq-realtek-rtl.c +++ b/drivers/irqchip/irq-realtek-rtl.c @@ -21,21 +21,63 @@ diff --git a/target/linux/realtek/patches-5.10/316-otto-gpio-uniprocessor-irq-mask.patch b/target/linux/realtek/patches-5.10/316-otto-gpio-uniprocessor-irq-mask.patch index a3241cadbd..3980875dd4 100644 --- a/target/linux/realtek/patches-5.10/316-otto-gpio-uniprocessor-irq-mask.patch +++ b/target/linux/realtek/patches-5.10/316-otto-gpio-uniprocessor-irq-mask.patch @@ -1,3 +1,25 @@ +From bde6311569ef25a00c3beaeabfd6b78b19651872 Mon Sep 17 00:00:00 2001 +From: Sander Vanheule +Date: Sun, 29 May 2022 19:38:09 +0200 +Subject: [PATCH] realtek: don't unmask non-maskable GPIO IRQs + +On uniprocessor builds, for_each_cpu(cpu, mask) will assume 'mask' +always contains exactly one CPU, and ignore the actual mask contents. +This causes the loop to run, even when it shouldn't on an empty mask, +and tries to access an uninitialised pointer. + +Fix this by wrapping the loop in a cpumask_empty() check, to ensure it +will not run on uniprocessor builds if the CPU mask is empty. + +Fixes: af6cd37f42f3 ("realtek: replace RTL93xx GPIO patches") +Reported-by: INAGAKI Hiroshi +Reported-by: Robert Marko +Tested-by: Robert Marko +Submitted-by: Sander Vanheule +--- + drivers/gpio/gpio-realtek-otto.c | 9 +++++++++++-- + 1 file changed, 11 insertions(+), 2 deletions(-) + --- a/drivers/gpio/gpio-realtek-otto.c +++ b/drivers/gpio/gpio-realtek-otto.c @@ -304,6 +304,7 @@ static int realtek_gpio_irq_set_affinity diff --git a/target/linux/realtek/patches-5.10/318-add-rtl83xx-clk-support.patch b/target/linux/realtek/patches-5.10/318-add-rtl83xx-clk-support.patch index 285b7489f2..94c4230835 100644 --- a/target/linux/realtek/patches-5.10/318-add-rtl83xx-clk-support.patch +++ b/target/linux/realtek/patches-5.10/318-add-rtl83xx-clk-support.patch @@ -1,3 +1,16 @@ +From 800d5fb3c6a16661932c932bacd660e38d06b727 Mon Sep 17 00:00:00 2001 +From: Markus Stockhausen +Date: Thu, 25 Aug 2022 08:22:36 +0200 +Subject: [PATCH] realtek: add patch to enable new clock driver in kernel + +Allow building the clock driver with kernel config options. + +Submitted-by: Markus Stockhausen +--- + drivers/clk/Kconfig | 1 + + drivers/clk/Makefile | 1 + + 2 files changed, 2 insertions(+) + --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -372,6 +372,7 @@ source "drivers/clk/mediatek/Kconfig" diff --git a/target/linux/realtek/patches-5.10/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch b/target/linux/realtek/patches-5.10/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch index 0ecff843fb..bb95e7103a 100644 --- a/target/linux/realtek/patches-5.10/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch +++ b/target/linux/realtek/patches-5.10/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch @@ -1,3 +1,17 @@ +From 2cd00b51470a30198b048a5fca48a04db77e29cc Mon Sep 17 00:00:00 2001 +From: INAGAKI Hiroshi +Date: Fri, 21 May 2021 23:16:37 +0900 +Subject: [PATCH] realtek: backport irq-realtek-rtl driver from 5.12 to 5.10 + +This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12. +"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" +is used in OpenWrt, so update the dependency by the additional patch. + +Submitted-by: INAGAKI Hiroshi +--- + drivers/irqchip/irq-realtek-rtl.c | 38 +++++++++++------ + 1 files changed, 58 insertions(+), 20 deletions(-) + --- a/drivers/irqchip/irq-realtek-rtl.c +++ b/drivers/irqchip/irq-realtek-rtl.c @@ -28,6 +28,7 @@ static DEFINE_RAW_SPINLOCK(irq_lock); diff --git a/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch b/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch index d585a316c5..f97ea94d9b 100644 --- a/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch +++ b/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch @@ -1,3 +1,25 @@ +From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 26 Nov 2020 12:02:21 +0100 +Subject: net: dsa: Add support for rtl838x switch + +* rename the target to realtek +* add refactored DSA driver +* add latest gpio driver +* lots of arch cleanups +* new irq driver +* additional boards + +Submitted-by: Bert Vermeulen +Submitted-by: Birger Koblitz +Submitted-by: Sander Vanheule +Submitted-by: Bjørn Mork +Submitted-by: John Crispin +--- + drivers/net/dsa/rtl83xx/Kconfig | 2 ++ + drivers/net/dsa/rtl83xx/Makefile | 1 + + 2 files changed, 3 insertions(+) + --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -68,6 +68,8 @@ config NET_DSA_QCA8K diff --git a/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch b/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch index 8c7efb58f3..27299f17de 100644 --- a/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch +++ b/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch @@ -1,3 +1,24 @@ +From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 26 Nov 2020 12:02:21 +0100 +Subject: net: dsa: Add rtl838x support for tag trailer + +* rename the target to realtek +* add refactored DSA driver +* add latest gpio driver +* lots of arch cleanups +* new irq driver +* additional boards + +Submitted-by: Bert Vermeulen +Submitted-by: Birger Koblitz +Submitted-by: Sander Vanheule +Submitted-by: Bjørn Mork +Submitted-by: John Crispin +--- + net/dsa/tag_trailer.c | 16 +++++++++++++- + 1 file changed, 17 insertions(+), 1 deletion(-) + --- a/net/dsa/tag_trailer.c +++ b/net/dsa/tag_trailer.c @@ -17,7 +17,12 @@ static struct sk_buff *trailer_xmit(stru diff --git a/target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch b/target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch index 929f2b9444..63991d373c 100644 --- a/target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.10/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch @@ -1,3 +1,24 @@ +From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 26 Nov 2020 12:02:21 +0100 +Subject: net: dsa: Increase max ports for rtl838x + +* rename the target to realtek +* add refactored DSA driver +* add latest gpio driver +* lots of arch cleanups +* new irq driver +* additional boards + +Submitted-by: Bert Vermeulen +Submitted-by: Birger Koblitz +Submitted-by: Sander Vanheule +Submitted-by: Bjørn Mork +Submitted-by: John Crispin +--- + include/linux/platform_data/dsa.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + --- a/include/linux/platform_data/dsa.h +++ b/include/linux/platform_data/dsa.h @@ -6,7 +6,7 @@ struct device; diff --git a/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch b/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch index f76f8e39a9..9f50e8b564 100644 --- a/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch +++ b/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch @@ -1,3 +1,25 @@ +From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 26 Nov 2020 12:02:21 +0100 +Subject: net: ethernet: Add support for RTL838x ethernet + +* rename the target to realtek +* add refactored DSA driver +* add latest gpio driver +* lots of arch cleanups +* new irq driver +* additional boards + +Submitted-by: Bert Vermeulen +Submitted-by: Birger Koblitz +Submitted-by: Sander Vanheule +Submitted-by: Bjørn Mork +Submitted-by: John Crispin +--- + drivers/net/ethernet/Kconfig | 7 +- + drivers/net/ethernet/Makefile | 1 + + 2 files changed, 8 insertions(+) + --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -163,6 +163,13 @@ source "drivers/net/ethernet/rdc/Kconfig diff --git a/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch b/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch index 0841b85fd8..8f68dd4e88 100644 --- a/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch @@ -1,3 +1,24 @@ +From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 26 Nov 2020 12:02:21 +0100 +Subject: phy: Add PHY ops for rtl838x EEE + +* rename the target to realtek +* add refactored DSA driver +* add latest gpio driver +* lots of arch cleanups +* new irq driver +* additional boards + +Submitted-by: Bert Vermeulen +Submitted-by: Birger Koblitz +Submitted-by: Sander Vanheule +Submitted-by: Bjørn Mork +Submitted-by: John Crispin +--- + include/linux/phy.h | 4 ++++ + 1 file changed, 4 insertions(+) + --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -885,6 +885,10 @@ struct phy_driver { diff --git a/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch b/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch index 3cb04c0868..c46be91fe0 100644 --- a/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch @@ -1,3 +1,24 @@ +From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 26 Nov 2020 12:02:21 +0100 +Subject: net: phy: EEE support for rtl838x + +* rename the target to realtek +* add refactored DSA driver +* add latest gpio driver +* lots of arch cleanups +* new irq driver +* additional boards + +Submitted-by: Bert Vermeulen +Submitted-by: Birger Koblitz +Submitted-by: Sander Vanheule +Submitted-by: Bjørn Mork +Submitted-by: John Crispin +--- + drivers/net/phy/phylink. | 14 +++++++++++-- + 1 file changed, 12 insertions(+), 2 deletions(-) + --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1449,6 +1449,11 @@ int phylink_ethtool_ksettings_set(struct diff --git a/target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch b/target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch index 58f4fef456..442bff82fa 100644 --- a/target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch +++ b/target/linux/realtek/patches-5.10/704-include-linux-add-phy-hsgmii-mode.patch @@ -1,3 +1,17 @@ +From 9d9bf16aa8d966834ac1280f96c37d22552c33d1 Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Wed, 8 Sep 2021 16:13:18 +0200 +Subject: phy: Add PHY hsgmii mode + +This adds RTL93xx-specific MAC configuration routines that allow also configuration +of 10GBit links for phylink. There is support for the Realtek-specific HISGMI +protocol. + +Submitted-by: Birger Koblitz +--- + include/linux/phy.h | 3 +++ + 1 file changed, 3 insertions(+) + --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -134,6 +134,7 @@ typedef enum { diff --git a/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch b/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch index e88c26b348..47041262fc 100644 --- a/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch +++ b/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch @@ -1,3 +1,17 @@ +From 89f71ebb355c624320c2b0ace8ae9488ff53cbeb Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Tue, 5 Jan 2021 20:40:52 +0100 +Subject: PHY: Add realtek PHY + +This fixes the build problems for the REALTEK target by adding a proper +configuration option for the phy module. + +Submitted-by: Birger Koblitz +--- + drivers/net/phy/Kconfig | 6 ++++++ + drivers/net/phy/Makefile | 1 + + 2 files changed, 7 insertions(+) + --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -330,6 +330,12 @@ config REALTEK_PHY diff --git a/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch b/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch index ab3ea8e689..bba6fd7182 100644 --- a/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch +++ b/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch @@ -1,3 +1,24 @@ +From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 26 Nov 2020 12:02:21 +0100 +Subject: PHY: Increase max PHY adddress number + +* rename the target to realtek +* add refactored DSA driver +* add latest gpio driver +* lots of arch cleanups +* new irq driver +* additional boards + +Submitted-by: Bert Vermeulen +Submitted-by: Birger Koblitz +Submitted-by: Sander Vanheule +Submitted-by: Bjørn Mork +Submitted-by: John Crispin +--- + include/linux/phy.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -233,7 +233,7 @@ static inline const char *phy_modes(phy_ diff --git a/target/linux/realtek/patches-5.10/708-brflood-api.patch b/target/linux/realtek/patches-5.10/708-brflood-api.patch index 06b9b7f758..2716933ae7 100644 --- a/target/linux/realtek/patches-5.10/708-brflood-api.patch +++ b/target/linux/realtek/patches-5.10/708-brflood-api.patch @@ -1,3 +1,21 @@ +From afa3ab54c03d5126b14651f367b38165fab5b3cc Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Tue, 18 Jan 2022 17:18:43 +0100 +Subject: net: brflood API + +Adds the DSA API for bridge configuration (flooding, L2 learning, +and aging) offload as found in Linux 5.12 so that we can implement +it in our drivver. + +Submitted-by: Sebastian Gottschall +Submitted-by: Birger Koblitz +--- + include/net/dsa.h | 6 +++++++-- + net/dsa/dsa_priv.h | 6 +++--- + net/dsa/port.c | 28 ++++++++---- + net/dsa/slave.c | 6 +++--- + 4 file changed, 29 insertions(+), 13 deletions(-) + --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -552,8 +552,14 @@ struct dsa_switch_ops { diff --git a/target/linux/realtek/patches-5.10/709-lag-offloading.patch b/target/linux/realtek/patches-5.10/709-lag-offloading.patch index 8758953542..95f1f01d3d 100644 --- a/target/linux/realtek/patches-5.10/709-lag-offloading.patch +++ b/target/linux/realtek/patches-5.10/709-lag-offloading.patch @@ -1,3 +1,25 @@ +From afa3ab54c03d5126b14651f367b38165fab5b3cc Mon Sep 17 00:00:00 2001 +From: Birger Koblitz +Date: Tue, 18 Jan 2022 17:18:43 +0100 +Subject: [PATCH] realtek: Backport bridge configuration for DSA + +Adds the DSA API for bridge configuration (flooding, L2 learning, +and aging) offload as found in Linux 5.12 so that we can implement +it in our drivver. + +Submitted-by: Sebastian Gottschall +Submitted-by: Birger Koblitz +--- + drivers/net/bonding/bond_main.c | 2 ++ + include/net/dsa.h | 79 ++++++++++++++++- + net/dsa/dsa2.c | 88 +++++++++++++++++++ + net/dsa/dsa_priv.h | 74 ++++++++++++++ + net/dsa/port.c | 92 ++++++++++++++++++++ + net/dsa/slave.c | 88 ++++++++++++++++--- + net/dsa/switch.c | 49 ++++++++++ + net/sda/tag_dsa.c | 13 +++++- + 8 file changed, 460 insertions(+), 25 deletions(-) + --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2046,6 +2046,8 @@ int bond_enslave(struct net_device *bond