From: Linus Walleij Date: Fri, 19 Jan 2024 23:08:42 +0000 (+0100) Subject: uboot-bcm53xx: bump to 2024.01 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f1a447bdb5f25a61402f513e68a216a1ae8c7c97;p=openwrt%2Fstaging%2Fsvanheule.git uboot-bcm53xx: bump to 2024.01 Bump the U-Boot version used for BCM53xx to the 2024.01 version that includes all the needed patches upstream, so we can get rid of those in the process. Signed-off-by: Linus Walleij --- diff --git a/package/boot/uboot-bcm53xx/Makefile b/package/boot/uboot-bcm53xx/Makefile index ab80b9608a..f1c026e25b 100644 --- a/package/boot/uboot-bcm53xx/Makefile +++ b/package/boot/uboot-bcm53xx/Makefile @@ -1,7 +1,7 @@ include $(TOPDIR)/rules.mk -PKG_VERSION:=2023.04 -PKG_HASH:=e31cac91545ff41b71cec5d8c22afd695645cd6e2a442ccdacacd60534069341 +PKG_VERSION:=2024.01 +PKG_HASH:=b99611f1ed237bf3541bdc8434b68c96a6e05967061f992443cb30aabebef5b3 PKG_RELEASE:=$(AUTORELEASE) include $(INCLUDE_DIR)/u-boot.mk diff --git a/package/boot/uboot-bcm53xx/patches/0001-nand-brcmnand-add-iproc-support.patch b/package/boot/uboot-bcm53xx/patches/0001-nand-brcmnand-add-iproc-support.patch deleted file mode 100644 index fe6f4d944a..0000000000 --- a/package/boot/uboot-bcm53xx/patches/0001-nand-brcmnand-add-iproc-support.patch +++ /dev/null @@ -1,199 +0,0 @@ -From 854dc4b790ce1291326d52b8405ebe771bff2edd Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Wed, 8 Mar 2023 22:42:31 +0100 -Subject: [PATCH 1/5] nand: brcmnand: add iproc support - -Add support for the iproc Broadcom NAND controller, -used in Northstar SoCs for example. Based on the Linux -driver. - -Cc: Philippe Reynes -Cc: Dario Binacchi -Reviewed-by: Michael Trimarchi -Signed-off-by: Linus Walleij -Acked-by: William Zhang -Link: https://lore.kernel.org/all/20230308214231.378013-1-linus.walleij@linaro.org/ -Signed-off-by: Dario Binacchi ---- - drivers/mtd/nand/raw/Kconfig | 7 + - drivers/mtd/nand/raw/brcmnand/Makefile | 1 + - drivers/mtd/nand/raw/brcmnand/iproc_nand.c | 148 +++++++++++++++++++++ - 3 files changed, 156 insertions(+) - create mode 100644 drivers/mtd/nand/raw/brcmnand/iproc_nand.c - ---- a/drivers/mtd/nand/raw/Kconfig -+++ b/drivers/mtd/nand/raw/Kconfig -@@ -156,6 +156,13 @@ config NAND_BRCMNAND_63158 - help - Enable support for broadcom nand driver on bcm63158. - -+config NAND_BRCMNAND_IPROC -+ bool "Support Broadcom NAND controller on the iproc family" -+ depends on NAND_BRCMNAND -+ help -+ Enable support for broadcom nand driver on the Broadcom -+ iproc family such as Northstar (BCM5301x, BCM4708...) -+ - config NAND_DAVINCI - bool "Support TI Davinci NAND controller" - select SYS_NAND_SELF_INIT if TARGET_DA850EVM ---- a/drivers/mtd/nand/raw/brcmnand/Makefile -+++ b/drivers/mtd/nand/raw/brcmnand/Makefile -@@ -6,5 +6,6 @@ obj-$(CONFIG_NAND_BRCMNAND_6753) += bcm6 - obj-$(CONFIG_NAND_BRCMNAND_68360) += bcm68360_nand.o - obj-$(CONFIG_NAND_BRCMNAND_6838) += bcm6838_nand.o - obj-$(CONFIG_NAND_BRCMNAND_6858) += bcm6858_nand.o -+obj-$(CONFIG_NAND_BRCMNAND_IPROC) += iproc_nand.o - obj-$(CONFIG_NAND_BRCMNAND) += brcmnand.o - obj-$(CONFIG_NAND_BRCMNAND) += brcmnand_compat.o ---- /dev/null -+++ b/drivers/mtd/nand/raw/brcmnand/iproc_nand.c -@@ -0,0 +1,148 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Code borrowed from the Linux driver -+ * Copyright (C) 2015 Broadcom Corporation -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "brcmnand.h" -+ -+struct iproc_nand_soc { -+ struct brcmnand_soc soc; -+ void __iomem *idm_base; -+ void __iomem *ext_base; -+}; -+ -+#define IPROC_NAND_CTLR_READY_OFFSET 0x10 -+#define IPROC_NAND_CTLR_READY BIT(0) -+ -+#define IPROC_NAND_IO_CTRL_OFFSET 0x00 -+#define IPROC_NAND_APB_LE_MODE BIT(24) -+#define IPROC_NAND_INT_CTRL_READ_ENABLE BIT(6) -+ -+static bool iproc_nand_intc_ack(struct brcmnand_soc *soc) -+{ -+ struct iproc_nand_soc *priv = -+ container_of(soc, struct iproc_nand_soc, soc); -+ void __iomem *mmio = priv->ext_base + IPROC_NAND_CTLR_READY_OFFSET; -+ u32 val = brcmnand_readl(mmio); -+ -+ if (val & IPROC_NAND_CTLR_READY) { -+ brcmnand_writel(IPROC_NAND_CTLR_READY, mmio); -+ return true; -+ } -+ -+ return false; -+} -+ -+static void iproc_nand_intc_set(struct brcmnand_soc *soc, bool en) -+{ -+ struct iproc_nand_soc *priv = -+ container_of(soc, struct iproc_nand_soc, soc); -+ void __iomem *mmio = priv->idm_base + IPROC_NAND_IO_CTRL_OFFSET; -+ u32 val = brcmnand_readl(mmio); -+ -+ if (en) -+ val |= IPROC_NAND_INT_CTRL_READ_ENABLE; -+ else -+ val &= ~IPROC_NAND_INT_CTRL_READ_ENABLE; -+ -+ brcmnand_writel(val, mmio); -+} -+ -+static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare, -+ bool is_param) -+{ -+ struct iproc_nand_soc *priv = -+ container_of(soc, struct iproc_nand_soc, soc); -+ void __iomem *mmio = priv->idm_base + IPROC_NAND_IO_CTRL_OFFSET; -+ u32 val; -+ -+ val = brcmnand_readl(mmio); -+ -+ /* -+ * In the case of BE or when dealing with NAND data, always configure -+ * the APB bus to LE mode before accessing the FIFO and back to BE mode -+ * after the access is done -+ */ -+ if (IS_ENABLED(CONFIG_SYS_BIG_ENDIAN) || !is_param) { -+ if (prepare) -+ val |= IPROC_NAND_APB_LE_MODE; -+ else -+ val &= ~IPROC_NAND_APB_LE_MODE; -+ } else { /* when in LE accessing the parameter page, keep APB in BE */ -+ val &= ~IPROC_NAND_APB_LE_MODE; -+ } -+ -+ brcmnand_writel(val, mmio); -+} -+ -+static int iproc_nand_probe(struct udevice *dev) -+{ -+ struct udevice *pdev = dev; -+ struct iproc_nand_soc *priv = dev_get_priv(dev); -+ struct brcmnand_soc *soc; -+ struct resource res; -+ int ret; -+ -+ soc = &priv->soc; -+ -+ ret = dev_read_resource_byname(pdev, "iproc-idm", &res); -+ if (ret) -+ return ret; -+ -+ priv->idm_base = devm_ioremap(dev, res.start, resource_size(&res)); -+ if (IS_ERR(priv->idm_base)) -+ return PTR_ERR(priv->idm_base); -+ -+ ret = dev_read_resource_byname(pdev, "iproc-ext", &res); -+ if (ret) -+ return ret; -+ -+ priv->ext_base = devm_ioremap(dev, res.start, resource_size(&res)); -+ if (IS_ERR(priv->ext_base)) -+ return PTR_ERR(priv->ext_base); -+ -+ soc->ctlrdy_ack = iproc_nand_intc_ack; -+ soc->ctlrdy_set_enabled = iproc_nand_intc_set; -+ soc->prepare_data_bus = iproc_nand_apb_access; -+ -+ return brcmnand_probe(pdev, soc); -+} -+ -+static const struct udevice_id iproc_nand_dt_ids[] = { -+ { -+ .compatible = "brcm,nand-iproc", -+ }, -+ { /* sentinel */ } -+}; -+ -+U_BOOT_DRIVER(iproc_nand) = { -+ .name = "iproc-nand", -+ .id = UCLASS_MTD, -+ .of_match = iproc_nand_dt_ids, -+ .probe = iproc_nand_probe, -+ .priv_auto = sizeof(struct iproc_nand_soc), -+}; -+ -+void board_nand_init(void) -+{ -+ struct udevice *dev; -+ int ret; -+ -+ ret = uclass_get_device_by_driver(UCLASS_MTD, -+ DM_DRIVER_GET(iproc_nand), &dev); -+ if (ret && ret != -ENODEV) -+ pr_err("Failed to initialize %s. (error %d)\n", dev->name, -+ ret); -+} diff --git a/package/boot/uboot-bcm53xx/patches/0002-mtd-rawnand-nand_base-Handle-algorithm-selection.patch b/package/boot/uboot-bcm53xx/patches/0002-mtd-rawnand-nand_base-Handle-algorithm-selection.patch deleted file mode 100644 index eb2a5ec703..0000000000 --- a/package/boot/uboot-bcm53xx/patches/0002-mtd-rawnand-nand_base-Handle-algorithm-selection.patch +++ /dev/null @@ -1,80 +0,0 @@ -From d75483f8892f3a0dfb8f5aa4147e72c02c8b034c Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Fri, 7 Apr 2023 15:40:05 +0200 -Subject: [PATCH 2/5] mtd: rawnand: nand_base: Handle algorithm selection - -For BRCMNAND with 1-bit BCH ECC (BCH-1) such as used on the -D-Link DIR-885L and DIR-890L routers, we need to explicitly -select the ECC like this in the device tree: - - nand-ecc-algo = "bch"; - nand-ecc-strength = <1>; - nand-ecc-step-size = <512>; - -This is handled by the Linux kernel but U-Boot core does -not respect this. Fix it up by parsing the algorithm and -preserve the behaviour using this property to select -software BCH as far as possible. - -Reviewed-by: Michael Trimarchi -Acked-by: William Zhang -Signed-off-by: Linus Walleij -Tested-by: Tom Rini [am335x_evm] -Link: https://lore.kernel.org/all/20230407134008.1939717-3-linus.walleij@linaro.org/ -Signed-off-by: Dario Binacchi ---- - drivers/mtd/nand/raw/nand_base.c | 29 +++++++++++++++++++++++++---- - 1 file changed, 25 insertions(+), 4 deletions(-) - ---- a/drivers/mtd/nand/raw/nand_base.c -+++ b/drivers/mtd/nand/raw/nand_base.c -@@ -4487,6 +4487,7 @@ EXPORT_SYMBOL(nand_detect); - static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, ofnode node) - { - int ret, ecc_mode = -1, ecc_strength, ecc_step; -+ int ecc_algo = NAND_ECC_UNKNOWN; - const char *str; - - ret = ofnode_read_s32_default(node, "nand-bus-width", -1); -@@ -4512,10 +4513,22 @@ static int nand_dt_init(struct mtd_info - ecc_mode = NAND_ECC_SOFT_BCH; - } - -- if (ecc_mode == NAND_ECC_SOFT) { -- str = ofnode_read_string(node, "nand-ecc-algo"); -- if (str && !strcmp(str, "bch")) -- ecc_mode = NAND_ECC_SOFT_BCH; -+ str = ofnode_read_string(node, "nand-ecc-algo"); -+ if (str) { -+ /* -+ * If we are in NAND_ECC_SOFT mode, just alter the -+ * soft mode to BCH here. No change of algorithm. -+ */ -+ if (ecc_mode == NAND_ECC_SOFT) { -+ if (!strcmp(str, "bch")) -+ ecc_mode = NAND_ECC_SOFT_BCH; -+ } else { -+ if (!strcmp(str, "bch")) { -+ ecc_algo = NAND_ECC_BCH; -+ } else if (!strcmp(str, "hamming")) { -+ ecc_algo = NAND_ECC_HAMMING; -+ } -+ } - } - - ecc_strength = ofnode_read_s32_default(node, -@@ -4529,6 +4542,14 @@ static int nand_dt_init(struct mtd_info - return -EINVAL; - } - -+ /* -+ * Chip drivers may have assigned default algorithms here, -+ * onlt override it if we have found something explicitly -+ * specified in the device tree. -+ */ -+ if (ecc_algo != NAND_ECC_UNKNOWN) -+ chip->ecc.algo = ecc_algo; -+ - if (ecc_mode >= 0) - chip->ecc.mode = ecc_mode; - diff --git a/package/boot/uboot-bcm53xx/patches/0003-arm-dts-Import-device-tree-for-Broadcom-Northstar.patch b/package/boot/uboot-bcm53xx/patches/0003-arm-dts-Import-device-tree-for-Broadcom-Northstar.patch deleted file mode 100644 index 6a4eef77f8..0000000000 --- a/package/boot/uboot-bcm53xx/patches/0003-arm-dts-Import-device-tree-for-Broadcom-Northstar.patch +++ /dev/null @@ -1,659 +0,0 @@ -From 3d6098a662b7ff5b80c4b75c54fcd1b2baf9f150 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Mon, 24 Apr 2023 09:38:28 +0200 -Subject: [PATCH 3/5] arm: dts: Import device tree for Broadcom Northstar -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This brings in the main SoC device tree used by the -Broadcom Northstar chipset, i.e. BCM4709x and BCM5301x. -This is taken from the v6.3 Linux kernel. - -Cc: Rafał Miłecki -Signed-off-by: Linus Walleij ---- - arch/arm/dts/bcm5301x.dtsi | 581 ++++++++++++++++++++++++++++ - include/dt-bindings/clock/bcm-nsp.h | 51 +++ - 2 files changed, 632 insertions(+) - create mode 100644 arch/arm/dts/bcm5301x.dtsi - create mode 100644 include/dt-bindings/clock/bcm-nsp.h - ---- /dev/null -+++ b/arch/arm/dts/bcm5301x.dtsi -@@ -0,0 +1,581 @@ -+/* -+ * Broadcom BCM470X / BCM5301X ARM platform code. -+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015, -+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs -+ * -+ * Copyright 2013-2014 Hauke Mehrtens -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ interrupt-parent = <&gic>; -+ -+ chipcommon-a-bus@18000000 { -+ compatible = "simple-bus"; -+ ranges = <0x00000000 0x18000000 0x00001000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ uart0: serial@300 { -+ compatible = "ns16550"; -+ reg = <0x0300 0x100>; -+ interrupts = ; -+ clocks = <&iprocslow>; -+ status = "disabled"; -+ }; -+ -+ uart1: serial@400 { -+ compatible = "ns16550"; -+ reg = <0x0400 0x100>; -+ interrupts = ; -+ clocks = <&iprocslow>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinmux_uart1>; -+ status = "disabled"; -+ }; -+ }; -+ -+ mpcore-bus@19000000 { -+ compatible = "simple-bus"; -+ ranges = <0x00000000 0x19000000 0x00023000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ a9pll: arm_clk@0 { -+ #clock-cells = <0>; -+ compatible = "brcm,nsp-armpll"; -+ clocks = <&osc>; -+ reg = <0x00000 0x1000>; -+ }; -+ -+ scu@20000 { -+ compatible = "arm,cortex-a9-scu"; -+ reg = <0x20000 0x100>; -+ }; -+ -+ timer@20200 { -+ compatible = "arm,cortex-a9-global-timer"; -+ reg = <0x20200 0x100>; -+ interrupts = ; -+ clocks = <&periph_clk>; -+ }; -+ -+ timer@20600 { -+ compatible = "arm,cortex-a9-twd-timer"; -+ reg = <0x20600 0x20>; -+ interrupts = ; -+ clocks = <&periph_clk>; -+ }; -+ -+ watchdog@20620 { -+ compatible = "arm,cortex-a9-twd-wdt"; -+ reg = <0x20620 0x20>; -+ interrupts = ; -+ clocks = <&periph_clk>; -+ }; -+ -+ gic: interrupt-controller@21000 { -+ compatible = "arm,cortex-a9-gic"; -+ #interrupt-cells = <3>; -+ #address-cells = <0>; -+ interrupt-controller; -+ reg = <0x21000 0x1000>, -+ <0x20100 0x100>; -+ }; -+ -+ L2: cache-controller@22000 { -+ compatible = "arm,pl310-cache"; -+ reg = <0x22000 0x1000>; -+ cache-unified; -+ arm,shared-override; -+ prefetch-data = <1>; -+ prefetch-instr = <1>; -+ cache-level = <2>; -+ }; -+ }; -+ -+ pmu { -+ compatible = "arm,cortex-a9-pmu"; -+ interrupts = -+ , -+ ; -+ }; -+ -+ clocks { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ osc: oscillator { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <25000000>; -+ }; -+ -+ iprocmed: iprocmed { -+ #clock-cells = <0>; -+ compatible = "fixed-factor-clock"; -+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; -+ clock-div = <2>; -+ clock-mult = <1>; -+ }; -+ -+ iprocslow: iprocslow { -+ #clock-cells = <0>; -+ compatible = "fixed-factor-clock"; -+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>; -+ clock-div = <4>; -+ clock-mult = <1>; -+ }; -+ -+ periph_clk: periph_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-factor-clock"; -+ clocks = <&a9pll>; -+ clock-div = <2>; -+ clock-mult = <1>; -+ }; -+ }; -+ -+ axi@18000000 { -+ compatible = "brcm,bus-axi"; -+ reg = <0x18000000 0x1000>; -+ ranges = <0x00000000 0x18000000 0x00100000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0x000fffff 0xffff>; -+ interrupt-map = -+ /* ChipCommon */ -+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Switch Register Access Block */ -+ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* PCIe Controller 0 */ -+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* PCIe Controller 1 */ -+ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* PCIe Controller 2 */ -+ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* USB 2.0 Controller */ -+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* USB 3.0 Controller */ -+ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 0 */ -+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 1 */ -+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 2 */ -+ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* Ethernet Controller 3 */ -+ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, -+ -+ /* NAND Controller */ -+ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, -+ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; -+ -+ chipcommon: chipcommon@0 { -+ reg = <0x00000000 0x1000>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ }; -+ -+ pcie0: pcie@12000 { -+ reg = <0x00012000 0x1000>; -+ }; -+ -+ pcie1: pcie@13000 { -+ reg = <0x00013000 0x1000>; -+ }; -+ -+ pcie2: pcie@14000 { -+ reg = <0x00014000 0x1000>; -+ }; -+ -+ usb2: usb2@21000 { -+ reg = <0x00021000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ interrupt-parent = <&gic>; -+ -+ ehci: usb@21000 { -+ #usb-cells = <0>; -+ -+ compatible = "generic-ehci"; -+ reg = <0x00021000 0x1000>; -+ interrupts = ; -+ phys = <&usb2_phy>; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ehci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ -+ ehci_port2: port@2 { -+ reg = <2>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ -+ ohci: usb@22000 { -+ #usb-cells = <0>; -+ -+ compatible = "generic-ohci"; -+ reg = <0x00022000 0x1000>; -+ interrupts = ; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ohci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ -+ ohci_port2: port@2 { -+ reg = <2>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ }; -+ -+ usb3: usb3@23000 { -+ reg = <0x00023000 0x1000>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ interrupt-parent = <&gic>; -+ -+ xhci: usb@23000 { -+ #usb-cells = <0>; -+ -+ compatible = "generic-xhci"; -+ reg = <0x00023000 0x1000>; -+ interrupts = ; -+ phys = <&usb3_phy>; -+ phy-names = "usb"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ xhci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ }; -+ -+ gmac0: ethernet@24000 { -+ reg = <0x24000 0x800>; -+ }; -+ -+ gmac1: ethernet@25000 { -+ reg = <0x25000 0x800>; -+ }; -+ -+ gmac2: ethernet@26000 { -+ reg = <0x26000 0x800>; -+ }; -+ -+ gmac3: ethernet@27000 { -+ reg = <0x27000 0x800>; -+ }; -+ }; -+ -+ pwm: pwm@18002000 { -+ compatible = "brcm,iproc-pwm"; -+ reg = <0x18002000 0x28>; -+ clocks = <&osc>; -+ #pwm-cells = <3>; -+ status = "disabled"; -+ }; -+ -+ mdio: mdio@18003000 { -+ compatible = "brcm,iproc-mdio"; -+ reg = <0x18003000 0x8>; -+ #size-cells = <0>; -+ #address-cells = <1>; -+ }; -+ -+ mdio-mux@18003000 { -+ compatible = "mdio-mux-mmioreg", "mdio-mux"; -+ mdio-parent-bus = <&mdio>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x18003000 0x4>; -+ mux-mask = <0x200>; -+ -+ mdio@0 { -+ reg = <0x0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ usb3_phy: usb3-phy@10 { -+ compatible = "brcm,ns-ax-usb3-phy"; -+ reg = <0x10>; -+ usb3-dmp-syscon = <&usb3_dmp>; -+ #phy-cells = <0>; -+ status = "disabled"; -+ }; -+ }; -+ }; -+ -+ usb3_dmp: syscon@18105000 { -+ reg = <0x18105000 0x1000>; -+ }; -+ -+ uart2: serial@18008000 { -+ compatible = "ns16550a"; -+ reg = <0x18008000 0x20>; -+ clocks = <&iprocslow>; -+ interrupts = ; -+ reg-shift = <2>; -+ status = "disabled"; -+ }; -+ -+ i2c0: i2c@18009000 { -+ compatible = "brcm,iproc-i2c"; -+ reg = <0x18009000 0x50>; -+ interrupts = ; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clock-frequency = <100000>; -+ status = "disabled"; -+ }; -+ -+ dmu-bus@1800c000 { -+ compatible = "simple-bus"; -+ ranges = <0 0x1800c000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ cru-bus@100 { -+ compatible = "brcm,ns-cru", "simple-mfd"; -+ reg = <0x100 0x1a4>; -+ ranges; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ lcpll0: clock-controller@100 { -+ #clock-cells = <1>; -+ compatible = "brcm,nsp-lcpll0"; -+ reg = <0x100 0x14>; -+ clocks = <&osc>; -+ clock-output-names = "lcpll0", "pcie_phy", -+ "sdio", "ddr_phy"; -+ }; -+ -+ genpll: clock-controller@140 { -+ #clock-cells = <1>; -+ compatible = "brcm,nsp-genpll"; -+ reg = <0x140 0x24>; -+ clocks = <&osc>; -+ clock-output-names = "genpll", "phy", -+ "ethernetclk", -+ "usbclk", "iprocfast", -+ "sata1", "sata2"; -+ }; -+ -+ usb2_phy: phy@164 { -+ compatible = "brcm,ns-usb2-phy"; -+ reg = <0x164 0x4>; -+ brcm,syscon-clkset = <&cru_clkset>; -+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; -+ clock-names = "phy-ref-clk"; -+ #phy-cells = <0>; -+ }; -+ -+ cru_clkset: syscon@180 { -+ compatible = "brcm,cru-clkset", "syscon"; -+ reg = <0x180 0x4>; -+ }; -+ -+ pinctrl: pinctrl@1c0 { -+ compatible = "brcm,bcm4708-pinmux"; -+ reg = <0x1c0 0x24>; -+ reg-names = "cru_gpio_control"; -+ -+ spi-pins { -+ groups = "spi_grp"; -+ function = "spi"; -+ }; -+ -+ pinmux_i2c: i2c-pins { -+ groups = "i2c_grp"; -+ function = "i2c"; -+ }; -+ -+ pinmux_pwm: pwm-pins { -+ groups = "pwm0_grp", "pwm1_grp", -+ "pwm2_grp", "pwm3_grp"; -+ function = "pwm"; -+ }; -+ -+ pinmux_uart1: uart1-pins { -+ groups = "uart1_grp"; -+ function = "uart1"; -+ }; -+ }; -+ -+ thermal: thermal@2c0 { -+ compatible = "brcm,ns-thermal"; -+ reg = <0x2c0 0x10>; -+ #thermal-sensor-cells = <0>; -+ }; -+ }; -+ }; -+ -+ srab: ethernet-switch@18007000 { -+ compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; -+ reg = <0x18007000 0x1000>; -+ -+ status = "disabled"; -+ -+ /* ports are defined in board DTS */ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+ -+ rng: rng@18004000 { -+ compatible = "brcm,bcm5301x-rng"; -+ reg = <0x18004000 0x14>; -+ }; -+ -+ nand_controller: nand-controller@18028000 { -+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; -+ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; -+ reg-names = "nand", "iproc-idm", "iproc-ext"; -+ interrupts = ; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ brcm,nand-has-wp; -+ }; -+ -+ spi@18029200 { -+ compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; -+ reg = <0x18029200 0x184>, -+ <0x18029000 0x124>, -+ <0x1811b408 0x004>, -+ <0x180293a0 0x01c>; -+ reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg"; -+ interrupts = , -+ , -+ , -+ , -+ , -+ , -+ ; -+ interrupt-names = "mspi_done", -+ "mspi_halted", -+ "spi_lr_fullness_reached", -+ "spi_lr_session_aborted", -+ "spi_lr_impatient", -+ "spi_lr_session_done", -+ "spi_lr_overread"; -+ clocks = <&iprocmed>; -+ clock-names = "iprocmed"; -+ num-cs = <2>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ spi_nor: flash@0 { -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <20000000>; -+ status = "disabled"; -+ -+ partitions { -+ compatible = "brcm,bcm947xx-cfe-partitions"; -+ }; -+ }; -+ }; -+ -+ thermal-zones { -+ cpu_thermal: cpu-thermal { -+ polling-delay-passive = <0>; -+ polling-delay = <1000>; -+ coefficients = <(-556) 418000>; -+ thermal-sensors = <&thermal>; -+ -+ trips { -+ cpu-crit { -+ temperature = <125000>; -+ hysteresis = <0>; -+ type = "critical"; -+ }; -+ }; -+ -+ cooling-maps { -+ }; -+ }; -+ }; -+}; ---- /dev/null -+++ b/include/dt-bindings/clock/bcm-nsp.h -@@ -0,0 +1,51 @@ -+/* -+ * BSD LICENSE -+ * -+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in -+ * the documentation and/or other materials provided with the -+ * distribution. -+ * * Neither the name of Broadcom Corporation nor the names of its -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+#ifndef _CLOCK_BCM_NSP_H -+#define _CLOCK_BCM_NSP_H -+ -+/* GENPLL clock channel ID */ -+#define BCM_NSP_GENPLL 0 -+#define BCM_NSP_GENPLL_PHY_CLK 1 -+#define BCM_NSP_GENPLL_ENET_SW_CLK 2 -+#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3 -+#define BCM_NSP_GENPLL_IPROCFAST_CLK 4 -+#define BCM_NSP_GENPLL_SATA1_CLK 5 -+#define BCM_NSP_GENPLL_SATA2_CLK 6 -+ -+/* LCPLL0 clock channel ID */ -+#define BCM_NSP_LCPLL0 0 -+#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1 -+#define BCM_NSP_LCPLL0_SDIO_CLK 2 -+#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3 -+ -+#endif /* _CLOCK_BCM_NSP_H */ diff --git a/package/boot/uboot-bcm53xx/patches/0004-arm-Add-support-for-the-Broadcom-Northstar-SoCs.patch b/package/boot/uboot-bcm53xx/patches/0004-arm-Add-support-for-the-Broadcom-Northstar-SoCs.patch deleted file mode 100644 index 92eaa46e51..0000000000 --- a/package/boot/uboot-bcm53xx/patches/0004-arm-Add-support-for-the-Broadcom-Northstar-SoCs.patch +++ /dev/null @@ -1,66 +0,0 @@ -From b81ea0a64b01ae42e8b41d2a8b9a3fabffe97489 Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Mon, 24 Apr 2023 09:38:29 +0200 -Subject: [PATCH 4/5] arm: Add support for the Broadcom Northstar SoCs -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The original Northstar is an ARM SoC series that comprise -BCM4709x and BCM5301x and uses a dual-core Cortex A9, the -global timer and a few other things. - -This series should not be confused with North Star Plus -(NSP) which is partly supported by U-Boot already. - -The SoC is well supported by the Linux kernel and OpenWrt -as it is used in many routers. - -Since we currently don't need any chip-specific quirks -and can get the system up from just the device tree, a -mach-* directory doesn't even need to be added, just -some small Kconfig fragments. - -Cc: Rafał Miłecki -Signed-off-by: Linus Walleij ---- - arch/arm/Kconfig | 21 ++++++++++++++++++++- - 1 file changed, 20 insertions(+), 1 deletion(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -357,7 +357,7 @@ config SYS_ARM_ARCH - - choice - prompt "Select the ARM data write cache policy" -- default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || RZA1 -+ default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || TARGET_BCMNS || RZA1 - default SYS_ARM_CACHE_WRITEBACK - - config SYS_ARM_CACHE_WRITEBACK -@@ -670,6 +670,25 @@ config TARGET_BCMCYGNUS - imply HASH_VERIFY - imply NETDEVICES - -+config TARGET_BCMNS -+ bool "Support Broadcom Northstar" -+ select CPU_V7A -+ select DM -+ select DM_GPIO -+ select DM_SERIAL -+ select OF_CONTROL -+ select TIMER -+ select SYS_NS16550 -+ select ARM_GLOBAL_TIMER -+ imply SYS_THUMB_BUILD -+ imply MTD_RAW_NAND -+ imply NAND_BRCMNAND -+ imply NAND_BRCMNAND_IPROC -+ help -+ Support for Broadcom Northstar SoCs. NS is a dual-core 32-bit -+ ARMv7 Cortex-A9 SoC family including BCM4708, BCM47094, -+ BCM5301x etc. -+ - config TARGET_BCMNS2 - bool "Support Broadcom Northstar2" - select ARM64 diff --git a/package/boot/uboot-bcm53xx/patches/0005-board-Add-new-Broadcom-Northstar-board.patch b/package/boot/uboot-bcm53xx/patches/0005-board-Add-new-Broadcom-Northstar-board.patch deleted file mode 100644 index 158718133d..0000000000 --- a/package/boot/uboot-bcm53xx/patches/0005-board-Add-new-Broadcom-Northstar-board.patch +++ /dev/null @@ -1,372 +0,0 @@ -From 652a6fa45b6c9d52dd9685fc12ad662e54a9092e Mon Sep 17 00:00:00 2001 -From: Linus Walleij -Date: Mon, 24 Apr 2023 09:38:30 +0200 -Subject: [PATCH 5/5] board: Add new Broadcom Northstar board -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This adds a simple Northstar "BRCMNS" board to be used with -the BCM4708x and BCM5301x chips. - -The main intention is to use this with the D-Link DIR-890L -and DIR-885L routers for loading the kernel into RAM from -NAND memory using the BCH-1 ECC and using the separately -submitted SEAMA load command, so we are currently not adding -support for things such as networking. - -The DTS file is a multiplatform NorthStar board, designed to -be usable with several NorthStar designs by avoiding any -particulars not related to the operation of U-Boot. - -If other board need other ECC for example, they need to -create a separate DTS file and augment the code, but I don't -know if any other users will turn up. - -Cc: Rafał Miłecki -Signed-off-by: Linus Walleij ---- - arch/arm/Kconfig | 1 + - arch/arm/dts/Makefile | 2 ++ - arch/arm/dts/ns-board.dts | 57 ++++++++++++++++++++++++++++++ - board/broadcom/bcmns/Kconfig | 12 +++++++ - board/broadcom/bcmns/MAINTAINERS | 6 ++++ - board/broadcom/bcmns/Makefile | 2 ++ - board/broadcom/bcmns/ns.c | 60 ++++++++++++++++++++++++++++++++ - configs/bcmns_defconfig | 41 ++++++++++++++++++++++ - doc/board/broadcom/index.rst | 1 + - doc/board/broadcom/northstar.rst | 44 +++++++++++++++++++++++ - include/configs/bcmns.h | 49 ++++++++++++++++++++++++++ - 11 files changed, 275 insertions(+) - create mode 100644 arch/arm/dts/ns-board.dts - create mode 100644 board/broadcom/bcmns/Kconfig - create mode 100644 board/broadcom/bcmns/MAINTAINERS - create mode 100644 board/broadcom/bcmns/Makefile - create mode 100644 board/broadcom/bcmns/ns.c - create mode 100644 configs/bcmns_defconfig - create mode 100644 doc/board/broadcom/northstar.rst - create mode 100644 include/configs/bcmns.h - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -2286,6 +2286,7 @@ source "board/Marvell/octeontx2/Kconfig" - source "board/armltd/vexpress/Kconfig" - source "board/armltd/vexpress64/Kconfig" - source "board/cortina/presidio-asic/Kconfig" -+source "board/broadcom/bcmns/Kconfig" - source "board/broadcom/bcmns3/Kconfig" - source "board/cavium/thunderx/Kconfig" - source "board/eets/pdu001/Kconfig" ---- a/arch/arm/dts/Makefile -+++ b/arch/arm/dts/Makefile -@@ -1185,6 +1185,8 @@ dtb-$(CONFIG_ARCH_BCM283X) += \ - bcm2837-rpi-cm3-io3.dtb \ - bcm2711-rpi-4-b.dtb - -+dtb-$(CONFIG_TARGET_BCMNS) += ns-board.dtb -+ - dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb - - dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb ---- /dev/null -+++ b/arch/arm/dts/ns-board.dts -@@ -0,0 +1,57 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+ -+/dts-v1/; -+ -+#include "bcm5301x.dtsi" -+ -+/ { -+ /* -+ * The Northstar does not have a proper fallback compatible, but -+ * these basic chips will suffice. -+ */ -+ model = "Northstar model"; -+ compatible = "brcm,bcm47094", "brcm,bcm4708"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ interrupt-parent = <&gic>; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x08000000>, -+ <0x88000000 0x08000000>; -+ }; -+ -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ nand-controller@18028000 { -+ nandcs: nand@0 { -+ compatible = "brcm,nandcs"; -+ reg = <0>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ /* -+ * Same as using the bcm5301x-nand-cs0-bch1.dtsi -+ * include from the Linux kernel. -+ */ -+ nand-ecc-algo = "bch"; -+ nand-ecc-strength = <1>; -+ nand-ecc-step-size = <512>; -+ -+ partitions { -+ compatible = "brcm,bcm947xx-cfe-partitions"; -+ }; -+ }; -+ }; -+}; -+ -+&uart0 { -+ clock-frequency = <125000000>; -+ status = "okay"; -+}; ---- /dev/null -+++ b/board/broadcom/bcmns/Kconfig -@@ -0,0 +1,12 @@ -+if TARGET_BCMNS -+ -+config SYS_BOARD -+ default "bcmns" -+ -+config SYS_VENDOR -+ default "broadcom" -+ -+config SYS_CONFIG_NAME -+ default "bcmns" -+ -+endif ---- /dev/null -+++ b/board/broadcom/bcmns/MAINTAINERS -@@ -0,0 +1,6 @@ -+BCMNS BOARD -+M: Linus Walleij -+S: Maintained -+F: board/broadcom/bcmnsp/ -+F: configs/bcmnsp_defconfig -+F: include/configs/bcmnsp.h ---- /dev/null -+++ b/board/broadcom/bcmns/Makefile -@@ -0,0 +1,2 @@ -+# SPDX-License-Identifier: GPL-2.0-or-later -+obj-y := ns.o ---- /dev/null -+++ b/board/broadcom/bcmns/ns.c -@@ -0,0 +1,60 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Broadcom Northstar generic board set-up code -+ * Copyright (C) 2023 Linus Walleij -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+DECLARE_GLOBAL_DATA_PTR; -+ -+int dram_init(void) -+{ -+ return fdtdec_setup_mem_size_base(); -+} -+ -+int dram_init_banksize(void) -+{ -+ return fdtdec_setup_memory_banksize(); -+} -+ -+int board_late_init(void) -+{ -+ /* LEDs etc can be initialized here */ -+ return 0; -+} -+ -+int board_init(void) -+{ -+ return 0; -+} -+ -+void reset_cpu(void) -+{ -+} -+ -+int print_cpuinfo(void) -+{ -+ printf("BCMNS Northstar SoC\n"); -+ return 0; -+} -+ -+int misc_init_r(void) -+{ -+ return 0; -+} -+ -+int ft_board_setup(void *fdt, struct bd_info *bd) -+{ -+ printf("Northstar board setup: DTB at 0x%08lx\n", (ulong)fdt); -+ return 0; -+} -+ ---- /dev/null -+++ b/configs/bcmns_defconfig -@@ -0,0 +1,41 @@ -+CONFIG_ARM=y -+CONFIG_TARGET_BCMNS=y -+CONFIG_TEXT_BASE=0x00008000 -+CONFIG_SYS_MALLOC_LEN=0x2000000 -+CONFIG_SYS_MALLOC_F_LEN=0x8000 -+CONFIG_NR_DRAM_BANKS=2 -+CONFIG_DEFAULT_DEVICE_TREE="ns-board" -+CONFIG_IDENT_STRING="Broadcom Northstar" -+CONFIG_SYS_LOAD_ADDR=0x00008000 -+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y -+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x00100000 -+# CONFIG_BOOTSTD is not set -+CONFIG_AUTOBOOT_KEYED=y -+CONFIG_AUTOBOOT_PROMPT="Boot Northstar system in %d seconds\n" -+CONFIG_BOOTDELAY=1 -+CONFIG_USE_BOOTCOMMAND=y -+CONFIG_BOOTCOMMAND="run bootcmd_dlink_dir8xxl" -+CONFIG_SYS_PROMPT="northstar> " -+CONFIG_ENV_VARS_UBOOT_CONFIG=y -+CONFIG_OF_BOARD_SETUP=y -+CONFIG_OF_STDOUT_VIA_ALIAS=y -+CONFIG_DISPLAY_BOARDINFO_LATE=y -+CONFIG_HUSH_PARSER=y -+CONFIG_SYS_MAXARGS=64 -+CONFIG_CMD_SEAMA=y -+CONFIG_CMD_BOOTZ=y -+CONFIG_CMD_CACHE=y -+CONFIG_OF_EMBED=y -+CONFIG_USE_HOSTNAME=y -+CONFIG_HOSTNAME="NS" -+CONFIG_CLK=y -+CONFIG_MTD=y -+CONFIG_DM_MTD=y -+CONFIG_MTD_RAW_NAND=y -+CONFIG_NAND_BRCMNAND=y -+CONFIG_SYS_NAND_ONFI_DETECTION=y -+CONFIG_CMD_NAND=y -+CONFIG_DM_SERIAL=y -+CONFIG_SYS_NS16550=y -+# CONFIG_NET is not set -+# CONFIG_EFI_LOADER is not set ---- a/doc/board/broadcom/index.rst -+++ b/doc/board/broadcom/index.rst -@@ -9,3 +9,4 @@ Broadcom - - bcm7xxx - raspberrypi -+ northstar ---- /dev/null -+++ b/doc/board/broadcom/northstar.rst -@@ -0,0 +1,44 @@ -+.. SPDX-License-Identifier: GPL-2.0+ -+.. Copyright (C) 2023 Linus Walleij -+ -+Broadcom Northstar Boards -+========================= -+ -+This document describes how to use U-Boot on the Broadcom Northstar -+boards, comprised of the Cortex A9 ARM-based BCM470x and BCM5301x SoCs. These -+were introduced in 2012-2013 and some of them are also called StrataGX. -+ -+Northstar is part of the iProc SoC family. -+ -+A good overview of these boards can be found in Jon Mason's presentation -+"Enabling New Hardware in U-Boot" where the difference between Northstar -+and Northstar Plus and Northstar 2 (Aarch64) is addressed. -+ -+The ROM in the Northstar SoC will typically look into NOR flash memory -+for a boot loader, and the way this works is undocumented. It should be -+possible to execute U-Boot as the first binary from the NOR flash but -+this usage path is unexplored. Please add information if you know more. -+ -+D-Link Boards -+------------- -+ -+When we use U-Boot with D-Link routers, the NOR flash has a boot loader -+and web server that can re-flash the bigger NAND flash memory for object -+code in the SEAMA format, so on these platforms U-Boot is converted into -+a SEAMA binary and installed in the SoC using the flash tool resident in -+the NOR flash. Details can be found in the OpenWrt project codebase. -+ -+Configure -+--------- -+ -+.. code-block:: console -+ -+ $ make CROSS_COMPILE=${CROSS_COMPILE} bcmns_defconfig -+ -+Build -+----- -+ -+.. code-block:: console -+ -+ $ make CROSS_COMPILE=${CROSS_COMPILE} -+ $ ${CROSS_COMPILE}strip u-boot ---- /dev/null -+++ b/include/configs/bcmns.h -@@ -0,0 +1,49 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+ -+#ifndef __BCM_NS_H -+#define __BCM_NS_H -+ -+#include -+ -+/* Physical Memory Map */ -+#define V2M_BASE 0x00000000 -+#define PHYS_SDRAM_1 V2M_BASE -+ -+#define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -+ -+/* Called "periph_clk" in Linux, used by the global timer */ -+#define CFG_SYS_HZ_CLOCK 500000000 -+ -+/* Called "iprocslow" in Linux */ -+#define CFG_SYS_NS16550_CLK 125000000 -+ -+/* console configuration */ -+#define CONSOLE_ARGS "console_args=console=ttyS0,115200n8\0" -+#define MAX_CPUS "max_cpus=maxcpus=2\0" -+#define EXTRA_ARGS "extra_args=earlycon=uart8250,mmio32,0x18000300\0" -+ -+#define BASE_ARGS "${console_args} ${extra_args} ${pcie_args}" \ -+ " ${max_cpus} ${log_level} ${reserved_mem}" -+#define SETBOOTARGS "setbootargs=setenv bootargs " BASE_ARGS "\0" -+ -+#define KERNEL_LOADADDR_CFG \ -+ "loadaddr=0x01000000\0" \ -+ "dtb_loadaddr=0x02000000\0" -+ -+/* -+ * Hardcoded for the only boards we support, if you add more -+ * boards, add a more clever bootcmd! -+ */ -+#define NS_BOOTCMD "bootcmd_dlink_dir8xxl=seama 0x00fe0000; go 0x01000000" -+ -+#define ARCH_ENV_SETTINGS \ -+ CONSOLE_ARGS \ -+ MAX_CPUS \ -+ EXTRA_ARGS \ -+ KERNEL_LOADADDR_CFG \ -+ NS_BOOTCMD -+ -+#define CFG_EXTRA_ENV_SETTINGS \ -+ ARCH_ENV_SETTINGS -+ -+#endif /* __BCM_NS_H */