From: Alexandros C. Couloumbis Date: Fri, 12 Nov 2010 17:06:16 +0000 (+0000) Subject: linux/adm5120: add preliminary 2.6.37 kernel support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f1924d71478c74a925585f87da558c5093252b3f;p=openwrt%2Fstaging%2Fmkresin.git linux/adm5120: add preliminary 2.6.37 kernel support SVN-Revision: 23973 --- diff --git a/target/linux/adm5120/patches-2.6.37/001-adm5120.patch b/target/linux/adm5120/patches-2.6.37/001-adm5120.patch new file mode 100644 index 0000000000..ddcb126b12 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/001-adm5120.patch @@ -0,0 +1,32 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -29,6 +29,21 @@ choice + prompt "System type" + default SGI_IP22 + ++config ADM5120 ++ bool "Infineon/ADMtek ADM5120 SoC based machines" ++ select CEVT_R4K ++ select CSRC_R4K ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select ARCH_REQUIRE_GPIOLIB ++ select SWAP_IO_SPACE if CPU_BIG_ENDIAN ++ select MIPS_MACHINE ++ + config MIPS_ALCHEMY + bool "Alchemy processor based machines" + select 64BIT_PHYS_ADDR +@@ -714,6 +729,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD + + endchoice + ++source "arch/mips/adm5120/Kconfig" + source "arch/mips/alchemy/Kconfig" + source "arch/mips/bcm63xx/Kconfig" + source "arch/mips/jazz/Kconfig" diff --git a/target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch new file mode 100644 index 0000000000..3df59fd715 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/002-adm5120_flash.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -552,4 +552,8 @@ config MTD_PISMO + + When built as a module, it will be called pismo.ko + ++config MTD_ADM5120 ++ tristate "Map driver for ADM5120 based boards" ++ depends on ADM5120 ++ + endmenu +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -40,6 +40,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2 + obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o + obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o + obj-$(CONFIG_MTD_PCI) += pci.o ++obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o + obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o + obj-$(CONFIG_MTD_EDB7312) += edb7312.o + obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch new file mode 100644 index 0000000000..30347ae0ca --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/003-adm5120_switch.patch @@ -0,0 +1,23 @@ +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -494,6 +494,10 @@ config MIPS_AU1X00_ENET + If you have an Alchemy Semi AU1X00 based system + say Y. Otherwise, say N. + ++config ADM5120_ENET ++ tristate "ADM5120 Ethernet switch support" ++ depends on ADM5120 ++ + config SGI_IOC3_ETH + bool "SGI IOC3 Ethernet" + depends on PCI && SGI_IP27 +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -216,6 +216,7 @@ obj-$(CONFIG_SC92031) += sc92031.o + # This is also a 82596 and should probably be merged + obj-$(CONFIG_LP486E) += lp486e.o + ++obj-$(CONFIG_ADM5120_ENET) += adm5120sw.o + obj-$(CONFIG_ETH16I) += eth16i.o + obj-$(CONFIG_ZORRO8390) += zorro8390.o 8390.o + obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch new file mode 100644 index 0000000000..8b5a553479 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/005-adm5120_usb.patch @@ -0,0 +1,33 @@ +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -9,6 +9,7 @@ obj-$(CONFIG_USB) += core/ + obj-$(CONFIG_USB_MON) += mon/ + + obj-$(CONFIG_PCI) += host/ ++obj-$(CONFIG_USB_ADM5120_HCD) += host/ + obj-$(CONFIG_USB_EHCI_HCD) += host/ + obj-$(CONFIG_USB_ISP116X_HCD) += host/ + obj-$(CONFIG_USB_OHCI_HCD) += host/ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -4,6 +4,10 @@ + comment "USB Host Controller Drivers" + depends on USB + ++config USB_ADM5120_HCD ++ tristate "ADM5120 HCD support (EXPERIMENTAL)" ++ depends on USB && ADM5120 && EXPERIMENTAL ++ + config USB_C67X00_HCD + tristate "Cypress C67x00 HCD support" + depends on USB +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci/ + + obj-$(CONFIG_PCI) += pci-quirks.o + ++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o diff --git a/target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch new file mode 100644 index 0000000000..26205f804a --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/007-adm5120_pci.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -55,6 +55,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capc + obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o + obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o + obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o ++obj-$(CONFIG_ADM5120) += pci-adm5120.o + + ifdef CONFIG_PCI_MSI + obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -1765,6 +1765,9 @@ + #define PCI_VENDOR_ID_ESDGMBH 0x12fe + #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 + ++#define PCI_VENDOR_ID_ADMTEK 0x1317 ++#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 ++ + #define PCI_VENDOR_ID_SIIG 0x131f + #define PCI_SUBVENDOR_ID_SIIG 0x131f + #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch new file mode 100644 index 0000000000..b13d48f556 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch @@ -0,0 +1,22 @@ +--- a/drivers/leds/Kconfig ++++ b/drivers/leds/Kconfig +@@ -400,4 +400,12 @@ config LEDS_TRIGGER_NETDEV + This allows LEDs to be controlled by network device activity. + If unsure, say Y. + ++config LEDS_TRIGGER_ADM5120_SWITCH ++ tristate "LED ADM5120 Switch Port Status Trigger" ++ depends on LEDS_TRIGGERS && ADM5120 ++ help ++ This allows LEDs to be controlled by the port states of ++ the ADM5120 built-in Ethernet Switch ++ If unsure, say N. ++ + endif # NEW_LEDS +--- a/drivers/leds/Makefile ++++ b/drivers/leds/Makefile +@@ -52,3 +52,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt + obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o + obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o ++obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch new file mode 100644 index 0000000000..6c46608305 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/101-cfi_fixup_macronix_bootloc.patch @@ -0,0 +1,84 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -48,6 +48,12 @@ + #define SST49LF008A 0x005a + #define AT49BV6416 0x00d6 + ++/* Macronix */ ++#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ ++#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */ ++#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */ ++#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */ ++ + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +@@ -345,6 +351,41 @@ static struct cfi_fixup cfi_nopri_fixup_ + { 0, 0, NULL, NULL } + }; + ++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++/* ++ * Some Macronix chips has no/bad bootblock information in the CFI table ++ */ ++static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param) ++{ ++ struct map_info *map = mtd->priv; ++ struct cfi_private *cfi = map->fldrv_priv; ++ struct cfi_pri_amdstd *extp = cfi->cmdset_priv; ++ __u8 t; ++ ++ switch (cfi->id) { ++ /* TODO: put affected chip ids here */ ++ case MX29LV160B: ++ case MX29LV320B: ++ t = 2; /* Bottom boot */ ++ break; ++ case MX29LV160T: ++ case MX29LV320T: ++ t = 3; /* Top boot */ ++ break; ++ default: ++ return; ++ } ++ ++ if (extp->TopBottom == t) ++ /* boot location detected by the CFI layer is correct */ ++ return; ++ ++ extp->TopBottom = t; ++ printk("%s: Macronix chip detected, id:0x%04X, boot location forced " ++ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top"); ++} ++#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ ++ + static struct cfi_fixup cfi_fixup_table[] = { + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, + #ifdef AMD_BOOTLOC_BUG +@@ -385,6 +426,9 @@ static struct cfi_fixup fixup_table[] = + */ + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, + { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, ++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++ { CFI_MFR_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, }, ++#endif + { 0, 0, NULL, NULL } + }; + +--- a/drivers/mtd/chips/Kconfig ++++ b/drivers/mtd/chips/Kconfig +@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD + provides support for one of those command sets, used on chips + including the AMD Am29LV320. + ++config MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++ bool "Fix boot-block location for Macronix flash chips" ++ depends on MTD_CFI_AMDSTD ++ help ++ Some Macronix flash chips have no/wrong boot-block location in the ++ CFI table, and the driver may detect the type incorrectly. Select ++ this if your board has such chip. ++ + config MTD_CFI_STAA + tristate "Support for ST (Advanced Architecture) flash chips" + depends on MTD_GEN_PROBE diff --git a/target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch new file mode 100644 index 0000000000..00148fa602 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/102-jedec_pmc_39lvxxx_chips.patch @@ -0,0 +1,68 @@ +--- a/drivers/mtd/chips/jedec_probe.c ++++ b/drivers/mtd/chips/jedec_probe.c +@@ -115,6 +115,10 @@ + #define UPD29F064115 0x221C + + /* PMC */ ++#define PM39LV512 0x001B ++#define PM39LV010 0x001C ++#define PM39LV020 0x003D ++#define PM39LV040 0x003E + #define PM49FL002 0x006D + #define PM49FL004 0x006E + #define PM49FL008 0x006A +@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } ++ }, { ++ .mfr_id = CFI_MFR_PMC, ++ .dev_id = PM39LV512, ++ .name = "PMC Pm39LV512", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_64KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,16), ++ } ++ }, { ++ .mfr_id = CFI_MFR_PMC, ++ .dev_id = PM39LV010, ++ .name = "PMC Pm39LV010", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_128KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,32), ++ } ++ }, { ++ .mfr_id = CFI_MFR_PMC, ++ .dev_id = PM39LV020, ++ .name = "PMC Pm39LV020", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_256KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,64), ++ } ++ }, { ++ .mfr_id = CFI_MFR_PMC, ++ .dev_id = PM39LV040, ++ .name = "PMC Pm39LV040", ++ .devtypes = CFI_DEVICETYPE_X8, ++ .uaddr = MTD_UADDR_0x0555_0x02AA, ++ .dev_size = SIZE_512KiB, ++ .cmd_set = P_ID_AMD_STD, ++ .nr_regions = 1, ++ .regions = { ++ ERASEINFO(0x01000,128), ++ } + }, { + .mfr_id = CFI_MFR_PMC, + .dev_id = PM49FL002, diff --git a/target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch new file mode 100644 index 0000000000..ec4f6c5a40 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/103-mtd_trxsplit.patch @@ -0,0 +1,24 @@ +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -63,6 +63,11 @@ config MTD_ROOTFS_SPLIT + depends on MTD_PARTITIONS + default y + ++config MTD_TRXSPLIT ++ bool "Automatically find and split TRX partitions" ++ depends on MTD_PARTITIONS ++ default n ++ + config MTD_REDBOOT_PARTS + tristate "RedBoot partition table parsing" + depends on MTD_PARTITIONS +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o + mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o + + obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o ++obj-$(CONFIG_MTD_TRXSPLIT) += trxsplit.o + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o diff --git a/target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch new file mode 100644 index 0000000000..49e9340987 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/120-rb153_cf_driver.patch @@ -0,0 +1,28 @@ +--- a/drivers/ata/Makefile ++++ b/drivers/ata/Makefile +@@ -86,6 +86,7 @@ obj-$(CONFIG_PATA_PALMLD) += pata_palmld + obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o + obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o + obj-$(CONFIG_PATA_QDI) += pata_qdi.o ++obj-$(CONFIG_PATA_RB153_CF) += pata_rb153_cf.o + obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o + obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o + obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o +--- a/drivers/ata/Kconfig ++++ b/drivers/ata/Kconfig +@@ -798,6 +798,15 @@ config PATA_QDI + help + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. + ++config PATA_RB153_CF ++ tristate "RouterBOARD 153 Compact Flash support" ++ depends on ADM5120_MACH_RB_153 ++ help ++ This option enables support for a Compact Flash connected on ++ the RouterBOARD 153. ++ ++ If unsure, say N. ++ + config PATA_RB532 + tristate "RouterBoard 532 PATA CompactFlash support" + depends on MIKROTIK_RB532 diff --git a/target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch new file mode 100644 index 0000000000..ed494e2c3c --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/200-amba_pl010_hacks.patch @@ -0,0 +1,378 @@ +--- a/drivers/serial/amba-pl010.c ++++ b/drivers/serial/amba-pl010.c +@@ -51,11 +51,10 @@ + + #include + +-#define UART_NR 8 +- + #define SERIAL_AMBA_MAJOR 204 + #define SERIAL_AMBA_MINOR 16 +-#define SERIAL_AMBA_NR UART_NR ++#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS ++#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME + + #define AMBA_ISR_PASS_LIMIT 256 + +@@ -81,9 +80,9 @@ static void pl010_stop_tx(struct uart_po + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr &= ~UART010_CR_TIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_start_tx(struct uart_port *port) +@@ -91,9 +90,9 @@ static void pl010_start_tx(struct uart_p + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr |= UART010_CR_TIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_stop_rx(struct uart_port *port) +@@ -101,9 +100,9 @@ static void pl010_stop_rx(struct uart_po + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_enable_ms(struct uart_port *port) +@@ -111,9 +110,9 @@ static void pl010_enable_ms(struct uart_ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); + cr |= UART010_CR_MSIE; +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); + } + + static void pl010_rx_chars(struct uart_amba_port *uap) +@@ -121,9 +120,9 @@ static void pl010_rx_chars(struct uart_a + struct tty_struct *tty = uap->port.state->port.tty; + unsigned int status, ch, flag, rsr, max_count = 256; + +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + while (UART_RX_DATA(status) && max_count--) { +- ch = readb(uap->port.membase + UART01x_DR); ++ ch = __raw_readl(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + + uap->port.icount.rx++; +@@ -132,9 +131,9 @@ static void pl010_rx_chars(struct uart_a + * Note that the error handling code is + * out of the main execution path + */ +- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; ++ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (unlikely(rsr & UART01x_RSR_ANY)) { +- writel(0, uap->port.membase + UART01x_ECR); ++ __raw_writel(0, uap->port.membase + UART01x_ECR); + + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); +@@ -164,7 +163,7 @@ static void pl010_rx_chars(struct uart_a + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + + ignore_char: +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(tty); +@@ -177,7 +176,7 @@ static void pl010_tx_chars(struct uart_a + int count; + + if (uap->port.x_char) { +- writel(uap->port.x_char, uap->port.membase + UART01x_DR); ++ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; +@@ -189,7 +188,7 @@ static void pl010_tx_chars(struct uart_a + + count = uap->port.fifosize >> 1; + do { +- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); ++ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) +@@ -207,9 +206,9 @@ static void pl010_modem_status(struct ua + { + unsigned int status, delta; + +- writel(0, uap->port.membase + UART010_ICR); ++ __raw_writel(0, uap->port.membase + UART010_ICR); + +- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; +@@ -237,7 +236,7 @@ static irqreturn_t pl010_int(int irq, vo + + spin_lock(&uap->port.lock); + +- status = readb(uap->port.membase + UART010_IIR); ++ status = __raw_readl(uap->port.membase + UART010_IIR); + if (status) { + do { + if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) +@@ -250,7 +249,7 @@ static irqreturn_t pl010_int(int irq, vo + if (pass_counter-- == 0) + break; + +- status = readb(uap->port.membase + UART010_IIR); ++ status = __raw_readl(uap->port.membase + UART010_IIR); + } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | + UART010_IIR_TIS)); + handled = 1; +@@ -264,7 +263,7 @@ static irqreturn_t pl010_int(int irq, vo + static unsigned int pl010_tx_empty(struct uart_port *port) + { + struct uart_amba_port *uap = (struct uart_amba_port *)port; +- unsigned int status = readb(uap->port.membase + UART01x_FR); ++ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; + } + +@@ -274,7 +273,7 @@ static unsigned int pl010_get_mctrl(stru + unsigned int result = 0; + unsigned int status; + +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_DCD) + result |= TIOCM_CAR; + if (status & UART01x_FR_DSR) +@@ -300,12 +299,12 @@ static void pl010_break_ctl(struct uart_ + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); +- lcr_h = readb(uap->port.membase + UART010_LCRH); ++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; +- writel(lcr_h, uap->port.membase + UART010_LCRH); ++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); + } + +@@ -333,12 +332,12 @@ static int pl010_startup(struct uart_por + /* + * initialise the old status of the modem signals + */ +- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ +- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, ++ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, + uap->port.membase + UART010_CR); + + return 0; +@@ -361,10 +360,10 @@ static void pl010_shutdown(struct uart_p + /* + * disable all interrupts, disable the port + */ +- writel(0, uap->port.membase + UART010_CR); ++ __raw_writel(0, uap->port.membase + UART010_CR); + + /* disable break condition and fifos */ +- writel(readb(uap->port.membase + UART010_LCRH) & ++ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) & + ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), + uap->port.membase + UART010_LCRH); + +@@ -386,7 +385,7 @@ pl010_set_termios(struct uart_port *port + /* + * Ask the core to calculate the divisor for us. + */ +- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); ++ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { +@@ -449,25 +448,25 @@ pl010_set_termios(struct uart_port *port + uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* first, disable everything */ +- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; ++ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= UART010_CR_MSIE; + +- writel(0, uap->port.membase + UART010_CR); ++ __raw_writel(0, uap->port.membase + UART010_CR); + + /* Set baud rate */ + quot -= 1; +- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); +- writel(quot & 0xff, uap->port.membase + UART010_LCRL); ++ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); ++ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ +- writel(lcr_h, uap->port.membase + UART010_LCRH); +- writel(old_cr, uap->port.membase + UART010_CR); ++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); ++ __raw_writel(old_cr, uap->port.membase + UART010_CR); + + spin_unlock_irqrestore(&uap->port.lock, flags); + } +@@ -549,7 +548,7 @@ static struct uart_ops amba_pl010_pops = + .verify_port = pl010_verify_port, + }; + +-static struct uart_amba_port *amba_ports[UART_NR]; ++static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR]; + + #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE + +@@ -559,10 +558,10 @@ static void pl010_console_putchar(struct + unsigned int status; + + do { +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + barrier(); + } while (!UART_TX_READY(status)); +- writel(ch, uap->port.membase + UART01x_DR); ++ __raw_writel(ch, uap->port.membase + UART01x_DR); + } + + static void +@@ -576,8 +575,8 @@ pl010_console_write(struct console *co, + /* + * First save the CR then disable the interrupts + */ +- old_cr = readb(uap->port.membase + UART010_CR); +- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); ++ old_cr = __raw_readl(uap->port.membase + UART010_CR); ++ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); + + uart_console_write(&uap->port, s, count, pl010_console_putchar); + +@@ -586,10 +585,10 @@ pl010_console_write(struct console *co, + * and restore the TCR + */ + do { +- status = readb(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); + barrier(); + } while (status & UART01x_FR_BUSY); +- writel(old_cr, uap->port.membase + UART010_CR); ++ __raw_writel(old_cr, uap->port.membase + UART010_CR); + + clk_disable(uap->clk); + } +@@ -598,9 +597,9 @@ static void __init + pl010_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) + { +- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { ++ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, quot; +- lcr_h = readb(uap->port.membase + UART010_LCRH); ++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { +@@ -615,8 +614,8 @@ pl010_console_get_options(struct uart_am + else + *bits = 8; + +- quot = readb(uap->port.membase + UART010_LCRL) | +- readb(uap->port.membase + UART010_LCRM) << 8; ++ quot = __raw_readl(uap->port.membase + UART010_LCRL) | ++ __raw_readl(uap->port.membase + UART010_LCRM) << 8; + *baud = uap->port.uartclk / (16 * (quot + 1)); + } + } +@@ -634,7 +633,7 @@ static int __init pl010_console_setup(st + * if so, search for the first available port that does have + * console support. + */ +- if (co->index >= UART_NR) ++ if (co->index >= SERIAL_AMBA_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) +@@ -652,7 +651,7 @@ static int __init pl010_console_setup(st + + static struct uart_driver amba_reg; + static struct console amba_console = { +- .name = "ttyAM", ++ .name = SERIAL_AMBA_NAME, + .write = pl010_console_write, + .device = uart_console_device, + .setup = pl010_console_setup, +@@ -668,11 +667,11 @@ static struct console amba_console = { + + static struct uart_driver amba_reg = { + .owner = THIS_MODULE, +- .driver_name = "ttyAM", +- .dev_name = "ttyAM", ++ .driver_name = SERIAL_AMBA_NAME, ++ .dev_name = SERIAL_AMBA_NAME, + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, +- .nr = UART_NR, ++ .nr = SERIAL_AMBA_NR, + .cons = AMBA_CONSOLE, + }; + +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -276,10 +276,25 @@ config SERIAL_AMBA_PL010 + help + This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have + an Integrator/AP or Integrator/PP2 platform, or if you have a +- Cirrus Logic EP93xx CPU, say Y or M here. ++ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here. + + If unsure, say N. + ++config SERIAL_AMBA_PL010_NUMPORTS ++ int "Maximum number of AMBA PL010 serial ports" ++ depends on SERIAL_AMBA_PL010 ++ default "8" ++ ---help--- ++ Set this to the number of serial ports you want the AMBA PL010 driver ++ to support. ++ ++config SERIAL_AMBA_PL010_PORTNAME ++ string "Name of the AMBA PL010 serial ports" ++ depends on SERIAL_AMBA_PL010 ++ default "ttyAM" ++ ---help--- ++ ::: To be written ::: ++ + config SERIAL_AMBA_PL010_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL010=y diff --git a/target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch new file mode 100644 index 0000000000..9db3e55adb --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/201-amba_bus_hacks.patch @@ -0,0 +1,13 @@ +--- a/drivers/amba/bus.c ++++ b/drivers/amba/bus.c +@@ -18,6 +18,10 @@ + #include + #include + ++#ifndef NO_IRQ ++#define NO_IRQ (-1) ++#endif ++ + #define to_amba_device(d) container_of(d, struct amba_device, dev) + #define to_amba_driver(d) container_of(d, struct amba_driver, drv) + diff --git a/target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch new file mode 100644 index 0000000000..ac3c516353 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/203-gpio_leds_brightness.patch @@ -0,0 +1,27 @@ +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -52,13 +52,17 @@ static void gpio_led_set(struct led_clas + container_of(led_cdev, struct gpio_led_data, cdev); + int level; + +- if (value == LED_OFF) +- level = 0; +- else +- level = 1; +- +- if (led_dat->active_low) +- level = !level; ++ switch (value) { ++ case LED_OFF: ++ level = led_dat->active_low ? 1 : 0; ++ break; ++ case LED_FULL: ++ level = led_dat->active_low ? 0 : 1; ++ break; ++ default: ++ level = value; ++ break; ++ } + + /* Setting GPIOs with I2C/etc requires a task context, and we don't + * seem to have a reliable way to know if we're already in one; so diff --git a/target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch new file mode 100644 index 0000000000..3a6cf5be01 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/310-adm5120_wdt.patch @@ -0,0 +1,31 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -849,6 +849,18 @@ config RC32434_WDT + To compile this driver as a module, choose M here: the + module will be called rc32434_wdt. + ++config ADM5120_WDT ++ tristate "Infineon ADM5120 SoC hardware watchdog" ++ depends on WATCHDOG && ADM5120 ++ help ++ This is a driver for hardware watchdog integrated in Infineon ++ ADM5120 SoC. This watchdog simply watches your kernel to make sure ++ it doesn't freeze, and if it does, it reboots your computer after a ++ certain amount of time. ++ ++ To compile this driver as a module, choose M here: the module will be ++ called adm5120_wdt. ++ + config INDYDOG + tristate "Indy/I2 Hardware Watchdog" + depends on SGI_HAS_INDYDOG +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -111,6 +111,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc + obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o + obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o + obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o ++obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o + obj-$(CONFIG_INDYDOG) += indydog.o + obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o + obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o diff --git a/target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch b/target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch new file mode 100644 index 0000000000..93149df401 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/901-adm5120-usb-fix-compiler-warning.patch @@ -0,0 +1,11 @@ +--- a/drivers/usb/host/adm5120-dbg.c ++++ b/drivers/usb/host/adm5120-dbg.c +@@ -133,7 +133,7 @@ urb_print(struct admhcd *ahcd, struct ur + + #define admhc_dbg_sw(ahcd, next, size, format, arg...) \ + do { \ +- if (next) { \ ++ if (next != NULL) { \ + unsigned s_len; \ + s_len = scnprintf(*next, *size, format, ## arg ); \ + *size -= s_len; *next += s_len; \ diff --git a/target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch b/target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch new file mode 100644 index 0000000000..4fd0283f41 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/902-adm5120-usb-remove-dev-power-power_state.patch @@ -0,0 +1,11 @@ +--- a/drivers/usb/host/adm5120-dbg.c ++++ b/drivers/usb/host/adm5120-dbg.c +@@ -642,7 +642,7 @@ static ssize_t fill_registers_buffer(str + hcd->product_desc, + hcd_name); + +- if (bus->controller->power.power_state.event) { ++ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + size -= scnprintf(next, size, + "SUSPENDED (no register access)\n"); + goto done; diff --git a/target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch b/target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch new file mode 100644 index 0000000000..aa50f8c48b --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/903-adm5120-usb-use-the-admhcd-structure-directly-in-debugfs-files.patch @@ -0,0 +1,116 @@ +--- a/drivers/usb/host/adm5120-dbg.c ++++ b/drivers/usb/host/adm5120-dbg.c +@@ -419,7 +419,7 @@ static struct dentry *admhc_debug_root; + + struct debug_buffer { + ssize_t (*fill_func)(struct debug_buffer *); /* fill method */ +- struct device *dev; ++ struct admhcd *ahcd; + struct mutex mutex; /* protect filling of buffer */ + size_t count; /* number of characters filled into buffer */ + char *page; +@@ -494,15 +494,11 @@ show_list(struct admhcd *ahcd, char *buf + + static ssize_t fill_async_buffer(struct debug_buffer *buf) + { +- struct usb_bus *bus; +- struct usb_hcd *hcd; + struct admhcd *ahcd; + size_t temp; + unsigned long flags; + +- bus = dev_get_drvdata(buf->dev); +- hcd = bus_to_hcd(bus); +- ahcd = hcd_to_admhcd(hcd); ++ ahcd = buf->ahcd; + + spin_lock_irqsave(&ahcd->lock, flags); + temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head); +@@ -516,8 +512,6 @@ static ssize_t fill_async_buffer(struct + + static ssize_t fill_periodic_buffer(struct debug_buffer *buf) + { +- struct usb_bus *bus; +- struct usb_hcd *hcd; + struct admhcd *ahcd; + struct ed **seen, *ed; + unsigned long flags; +@@ -529,9 +523,7 @@ static ssize_t fill_periodic_buffer(stru + return 0; + seen_count = 0; + +- bus = dev_get_drvdata(buf->dev); +- hcd = bus_to_hcd(bus); +- ahcd = hcd_to_admhcd(hcd); ++ ahcd = buf->ahcd; + next = buf->page; + size = PAGE_SIZE; + +@@ -613,7 +605,6 @@ static ssize_t fill_periodic_buffer(stru + + static ssize_t fill_registers_buffer(struct debug_buffer *buf) + { +- struct usb_bus *bus; + struct usb_hcd *hcd; + struct admhcd *ahcd; + struct admhcd_regs __iomem *regs; +@@ -622,9 +613,8 @@ static ssize_t fill_registers_buffer(str + char *next; + u32 rdata; + +- bus = dev_get_drvdata(buf->dev); +- hcd = bus_to_hcd(bus); +- ahcd = hcd_to_admhcd(hcd); ++ ahcd = buf->ahcd; ++ hcd = admhcd_to_hcd(ahcd); + regs = ahcd->regs; + next = buf->page; + size = PAGE_SIZE; +@@ -689,7 +679,7 @@ done: + } + + +-static struct debug_buffer *alloc_buffer(struct device *dev, ++static struct debug_buffer *alloc_buffer(struct admhcd *ahcd, + ssize_t (*fill_func)(struct debug_buffer *)) + { + struct debug_buffer *buf; +@@ -697,7 +687,7 @@ static struct debug_buffer *alloc_buffer + buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL); + + if (buf) { +- buf->dev = dev; ++ buf->ahcd = ahcd; + buf->fill_func = fill_func; + mutex_init(&buf->mutex); + } +@@ -790,26 +780,25 @@ static int debug_registers_open(struct i + static inline void create_debug_files(struct admhcd *ahcd) + { + struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self; +- struct device *dev = bus->dev; + + ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root); + if (!ahcd->debug_dir) + goto dir_error; + + ahcd->debug_async = debugfs_create_file("async", S_IRUGO, +- ahcd->debug_dir, dev, ++ ahcd->debug_dir, ahcd, + &debug_async_fops); + if (!ahcd->debug_async) + goto async_error; + + ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO, +- ahcd->debug_dir, dev, ++ ahcd->debug_dir, ahcd, + &debug_periodic_fops); + if (!ahcd->debug_periodic) + goto periodic_error; + + ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO, +- ahcd->debug_dir, dev, ++ ahcd->debug_dir, ahcd, + &debug_registers_fops); + if (!ahcd->debug_registers) + goto registers_error; diff --git a/target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch b/target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch new file mode 100644 index 0000000000..cb1b376da7 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/906-adm5120sw-mc_count-fix.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/adm5120sw.c ++++ b/drivers/net/adm5120sw.c +@@ -937,7 +937,7 @@ static void adm5120_if_set_multicast_lis + t |= (ports << CPUP_CONF_DUNP_SHIFT); + + if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || +- dev->mc_count) ++ netdev_mc_count(dev)) + /* enable multicast packets */ + t &= ~(ports << CPUP_CONF_DMCP_SHIFT); + else diff --git a/target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch b/target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch new file mode 100644 index 0000000000..1e51c4717e --- /dev/null +++ b/target/linux/adm5120/patches-2.6.37/930-2_6_36_ports.patch @@ -0,0 +1,119 @@ +--- a/arch/mips/include/asm/war.h ++++ b/arch/mips/include/asm/war.h +@@ -9,7 +9,7 @@ + #ifndef _ASM_WAR_H + #define _ASM_WAR_H + +-#include ++#include + + /* + * Work around certain R4000 CPU errata (as implemented by GCC): +--- a/drivers/amba/bus.c ++++ b/drivers/amba/bus.c +@@ -16,7 +16,7 @@ + #include + + #include +-#include ++#include + + #ifndef NO_IRQ + #define NO_IRQ (-1) +--- a/drivers/watchdog/adm5120_wdt.c ++++ b/drivers/watchdog/adm5120_wdt.c +@@ -167,7 +167,7 @@ static struct file_operations wdt_fops = + owner: THIS_MODULE, + llseek: no_llseek, + write: wdt_write, +- ioctl: wdt_ioctl, ++ unlocked_ioctl: wdt_ioctl, + open: wdt_open, + release: wdt_release, + }; +--- a/arch/mips/Kbuild.platforms ++++ b/arch/mips/Kbuild.platforms +@@ -1,5 +1,6 @@ + # All platforms listed in alphabetic order + ++platforms += adm5120 + platforms += alchemy + platforms += ar7 + platforms += bcm47xx +--- a/drivers/net/adm5120sw.c ++++ b/drivers/net/adm5120sw.c +@@ -26,6 +26,7 @@ + #include + #include + #include ++#include + + #include + #include +--- a/arch/mips/adm5120/common/clock.c ++++ b/arch/mips/adm5120/common/clock.c +@@ -33,7 +33,7 @@ static struct clk uart_clk = { + + struct clk *clk_get(struct device *dev, const char *id) + { +- char *name = dev_name(dev); ++ const char *name = dev_name(dev); + + if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1")) + return &uart_clk; +--- /dev/null ++++ b/arch/mips/adm5120/Platform +@@ -0,0 +1,53 @@ ++# ++# Core Infineon/ADMtek ADM5120 ++# ++platform-$(CONFIG_ADM5120) += adm5120/common/ ++ ++# ++# OEM CELLVISION ++# ++platform-$(CONFIG_ADM5120_OEM_CELLVISION) += adm5120/cellvision/ ++ ++# ++# OEM COMPEX ++# ++platform-$(CONFIG_ADM5120_OEM_COMPEX) += adm5120/compex/ ++ ++# ++# OEM EDIMAX ++# ++platform-$(CONFIG_ADM5120_OEM_EDIMAX) += adm5120/edimax/ ++ ++# ++# OEM GENERIC ++# ++platform-$(CONFIG_ADM5120_OEM_GENERIC) += adm5120/generic/ ++ ++# ++# OEM INFINEON ++# ++platform-$(CONFIG_ADM5120_OEM_INFINEON) += adm5120/infineon/ ++ ++# ++# OEM MIKROTIK ++# ++platform-$(CONFIG_ADM5120_OEM_MIKROTIK) += adm5120/mikrotik/ ++ ++# ++# OEM MOTOROLA ++# ++platform-$(CONFIG_ADM5120_OEM_MOTOROLA) += adm5120/motorola/ ++ ++# ++# OEM OSBRIDGE ++# ++platform-$(CONFIG_ADM5120_OEM_OSBRIDGE) += adm5120/osbridge/ ++ ++# ++# OEM ZYXEL ++# ++platform-$(CONFIG_ADM5120_OEM_ZYXEL) += adm5120/zyxel/ ++ ++cflags-$(CONFIG_ADM5120) += -I$(srctree)/arch/mips/include/asm/mach-adm5120 ++libs-$(CONFIG_ADM5120) += arch/mips/adm5120/prom/ ++load-$(CONFIG_ADM5120) += 0xffffffff80001000 diff --git a/target/linux/adm5120/router_be/config-2.6.37 b/target/linux/adm5120/router_be/config-2.6.37 new file mode 100644 index 0000000000..ca9065c2b2 --- /dev/null +++ b/target/linux/adm5120/router_be/config-2.6.37 @@ -0,0 +1,273 @@ +CONFIG_32BIT=y +CONFIG_ADM5120=y +CONFIG_ADM5120_ENET=y +CONFIG_ADM5120_MACH_5GXI=y +CONFIG_ADM5120_MACH_BR_6104K=y +CONFIG_ADM5120_MACH_BR_6104KP=y +CONFIG_ADM5120_MACH_BR_61X4WG=y +CONFIG_ADM5120_MACH_CAS_771=y +CONFIG_ADM5120_MACH_EASY5120P_ATA=y +CONFIG_ADM5120_MACH_EASY5120_RT=y +CONFIG_ADM5120_MACH_EASY5120_WVOIP=y +CONFIG_ADM5120_MACH_EASY83000=y +CONFIG_ADM5120_MACH_EB_214A=y +CONFIG_ADM5120_MACH_NFS_101=y +CONFIG_ADM5120_MACH_NP27G=y +CONFIG_ADM5120_MACH_NP28G=y +CONFIG_ADM5120_MACH_PMUGW=y +CONFIG_ADM5120_MACH_RB_11X=y +CONFIG_ADM5120_MACH_RB_133=y +CONFIG_ADM5120_MACH_RB_133C=y +CONFIG_ADM5120_MACH_RB_150=y +CONFIG_ADM5120_MACH_RB_153=y +CONFIG_ADM5120_MACH_RB_192=y +CONFIG_ADM5120_MACH_WP54=y +CONFIG_ADM5120_OEM_CELLVISION=y +CONFIG_ADM5120_OEM_COMPEX=y +CONFIG_ADM5120_OEM_EDIMAX=y +CONFIG_ADM5120_OEM_GENERIC=y +CONFIG_ADM5120_OEM_INFINEON=y +CONFIG_ADM5120_OEM_MIKROTIK=y +CONFIG_ADM5120_OEM_MOTOROLA=y +CONFIG_ADM5120_OEM_OSBRIDGE=y +# CONFIG_ADM5120_OEM_ZYXEL is not set +CONFIG_ADM5120_SOC_BGA=y +CONFIG_ADM5120_WDT=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_AR7 is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_AMBA=y +# CONFIG_ARM_SP805_WATCHDOG is not set +CONFIG_ATA=m +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +CONFIG_BITREVERSE=y +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +CONFIG_CPU_MIPSR1=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CRYPTO=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_PCOMP2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_WORKQUEUE=m +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +# CONFIG_FANOTIFY is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_PL061 is not set +CONFIG_GPIO_SYSFS=y +# CONFIG_HARDLOCKUP_DETECTOR is not set +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HID=m +CONFIG_HID_SUPPORT=y +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_PCI=m +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INOTIFY_USER=y +CONFIG_INPUT=m +# CONFIG_INPUT_GPIO_BUTTONS is not set +# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set +CONFIG_IRQ_CPU=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +CONFIG_LIB80211_CRYPT_WEP=m +# CONFIG_LOONGSON_MC146818 is not set +CONFIG_LOONGSON_UART_BASE=y +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_JZ4740 is not set +# CONFIG_MACH_LOONGSON is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_MII=m +# CONFIG_MIKROTIK_RB532 is not set +CONFIG_MIPS=y +# CONFIG_MIPS_ALCHEMY is not set +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_SIM is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_MTD_ADM5120=y +CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_SM_COMMON is not set +CONFIG_MTD_TRXSPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NLATTR=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NO_HZ=y +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_POWERTV is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +CONFIG_SCSI_MOD=m +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 +CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" +# CONFIG_SERIAL_AMBA_PL011 is not set +# CONFIG_SERIAL_MFD_HSU is not set +CONFIG_SERIO=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +CONFIG_SOFT_WATCHDOG=m +CONFIG_SSB_POSSIBLE=y +CONFIG_STACKTRACE_SUPPORT=y +# CONFIG_SWAP is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_TC35815 is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_TRACING_SUPPORT=y +CONFIG_TRAD_SIGNALS=y +CONFIG_USB=m +CONFIG_USB_ADM5120_HCD=m +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_VIRT_TO_BUS=y +CONFIG_YAFFS_9BYTE_TAGS=y +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_BACKGROUND is not set +# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set +CONFIG_YAFFS_DISABLE_TAGS_ECC=y +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_YAFFS_XATTR=y +CONFIG_YAFFS_YAFFS1=y +CONFIG_YAFFS_YAFFS2=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA_FLAG=0 +# CONFIG_ZRAM is not set diff --git a/target/linux/adm5120/router_le/config-2.6.37 b/target/linux/adm5120/router_le/config-2.6.37 new file mode 100644 index 0000000000..ca9065c2b2 --- /dev/null +++ b/target/linux/adm5120/router_le/config-2.6.37 @@ -0,0 +1,273 @@ +CONFIG_32BIT=y +CONFIG_ADM5120=y +CONFIG_ADM5120_ENET=y +CONFIG_ADM5120_MACH_5GXI=y +CONFIG_ADM5120_MACH_BR_6104K=y +CONFIG_ADM5120_MACH_BR_6104KP=y +CONFIG_ADM5120_MACH_BR_61X4WG=y +CONFIG_ADM5120_MACH_CAS_771=y +CONFIG_ADM5120_MACH_EASY5120P_ATA=y +CONFIG_ADM5120_MACH_EASY5120_RT=y +CONFIG_ADM5120_MACH_EASY5120_WVOIP=y +CONFIG_ADM5120_MACH_EASY83000=y +CONFIG_ADM5120_MACH_EB_214A=y +CONFIG_ADM5120_MACH_NFS_101=y +CONFIG_ADM5120_MACH_NP27G=y +CONFIG_ADM5120_MACH_NP28G=y +CONFIG_ADM5120_MACH_PMUGW=y +CONFIG_ADM5120_MACH_RB_11X=y +CONFIG_ADM5120_MACH_RB_133=y +CONFIG_ADM5120_MACH_RB_133C=y +CONFIG_ADM5120_MACH_RB_150=y +CONFIG_ADM5120_MACH_RB_153=y +CONFIG_ADM5120_MACH_RB_192=y +CONFIG_ADM5120_MACH_WP54=y +CONFIG_ADM5120_OEM_CELLVISION=y +CONFIG_ADM5120_OEM_COMPEX=y +CONFIG_ADM5120_OEM_EDIMAX=y +CONFIG_ADM5120_OEM_GENERIC=y +CONFIG_ADM5120_OEM_INFINEON=y +CONFIG_ADM5120_OEM_MIKROTIK=y +CONFIG_ADM5120_OEM_MOTOROLA=y +CONFIG_ADM5120_OEM_OSBRIDGE=y +# CONFIG_ADM5120_OEM_ZYXEL is not set +CONFIG_ADM5120_SOC_BGA=y +CONFIG_ADM5120_WDT=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_AR7 is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_AMBA=y +# CONFIG_ARM_SP805_WATCHDOG is not set +CONFIG_ATA=m +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +CONFIG_BITREVERSE=y +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +CONFIG_CPU_MIPSR1=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CRYPTO=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_PCOMP2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_WORKQUEUE=m +CONFIG_CSRC_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +# CONFIG_FANOTIFY is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_PL061 is not set +CONFIG_GPIO_SYSFS=y +# CONFIG_HARDLOCKUP_DETECTOR is not set +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HID=m +CONFIG_HID_SUPPORT=y +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_PCI=m +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INOTIFY_USER=y +CONFIG_INPUT=m +# CONFIG_INPUT_GPIO_BUTTONS is not set +# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set +CONFIG_IRQ_CPU=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +CONFIG_LIB80211_CRYPT_WEP=m +# CONFIG_LOONGSON_MC146818 is not set +CONFIG_LOONGSON_UART_BASE=y +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_JZ4740 is not set +# CONFIG_MACH_LOONGSON is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MFD_SUPPORT is not set +CONFIG_MII=m +# CONFIG_MIKROTIK_RB532 is not set +CONFIG_MIPS=y +# CONFIG_MIPS_ALCHEMY is not set +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_SIM is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_MTD_ADM5120=y +CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_SM_COMMON is not set +CONFIG_MTD_TRXSPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NLATTR=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NO_HZ=y +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_POWERTV is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +CONFIG_SCSI_MOD=m +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 +CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" +# CONFIG_SERIAL_AMBA_PL011 is not set +# CONFIG_SERIAL_MFD_HSU is not set +CONFIG_SERIO=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +CONFIG_SOFT_WATCHDOG=m +CONFIG_SSB_POSSIBLE=y +CONFIG_STACKTRACE_SUPPORT=y +# CONFIG_SWAP is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_TC35815 is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_TRACING_SUPPORT=y +CONFIG_TRAD_SIGNALS=y +CONFIG_USB=m +CONFIG_USB_ADM5120_HCD=m +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_VIRT_TO_BUS=y +CONFIG_YAFFS_9BYTE_TAGS=y +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_BACKGROUND is not set +# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set +CONFIG_YAFFS_DISABLE_TAGS_ECC=y +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_YAFFS_XATTR=y +CONFIG_YAFFS_YAFFS1=y +CONFIG_YAFFS_YAFFS2=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZONE_DMA_FLAG=0 +# CONFIG_ZRAM is not set