From: Hauke Mehrtens Date: Wed, 2 Dec 2015 15:24:53 +0000 (+0000) Subject: bcm53xx: update PCIe driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f17be5617a89b213966c44127fa6a597cd637464;p=openwrt%2Fstaging%2Fdangole.git bcm53xx: update PCIe driver This updates the iProc PCIe driver to the version currently submitted for kernel 4.5. Signed-off-by: Hauke Mehrtens SVN-Revision: 47688 --- diff --git a/target/linux/bcm53xx/patches-4.1/035-PCI-iproc-Delete-unnecessary-checks-before-phy-calls.patch b/target/linux/bcm53xx/patches-4.1/035-PCI-iproc-Delete-unnecessary-checks-before-phy-calls.patch new file mode 100644 index 0000000000..fc83337de7 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/035-PCI-iproc-Delete-unnecessary-checks-before-phy-calls.patch @@ -0,0 +1,79 @@ +From 93972d18bbaba6f34e21742400b6e7461edc4837 Mon Sep 17 00:00:00 2001 +From: Markus Elfring +Date: Sun, 28 Jun 2015 16:42:04 +0200 +Subject: [PATCH] PCI: iproc: Delete unnecessary checks before phy calls + +The functions phy_exit() and phy_power_off() test whether their argument is +NULL and then return immediately. Thus the test around the calls is not +needed. + +This issue was detected by using the Coccinelle software. + +[bhelgaas: also phy_init() and phy_power_on(), as Ray Jui suggested] +[bhelgaas: also remove tests in iproc_pcie_remove()] +Signed-off-by: Markus Elfring +Signed-off-by: Bjorn Helgaas +Reviewed-by: Ray Jui +--- + drivers/pci/host/pcie-iproc.c | 34 +++++++++++++--------------------- + 1 file changed, 13 insertions(+), 21 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -191,19 +191,16 @@ int iproc_pcie_setup(struct iproc_pcie * + if (!pcie || !pcie->dev || !pcie->base) + return -EINVAL; + +- if (pcie->phy) { +- ret = phy_init(pcie->phy); +- if (ret) { +- dev_err(pcie->dev, "unable to initialize PCIe PHY\n"); +- return ret; +- } +- +- ret = phy_power_on(pcie->phy); +- if (ret) { +- dev_err(pcie->dev, "unable to power on PCIe PHY\n"); +- goto err_exit_phy; +- } ++ ret = phy_init(pcie->phy); ++ if (ret) { ++ dev_err(pcie->dev, "unable to initialize PCIe PHY\n"); ++ return ret; ++ } + ++ ret = phy_power_on(pcie->phy); ++ if (ret) { ++ dev_err(pcie->dev, "unable to power on PCIe PHY\n"); ++ goto err_exit_phy; + } + + iproc_pcie_reset(pcie); +@@ -239,12 +236,9 @@ err_rm_root_bus: + pci_remove_root_bus(bus); + + err_power_off_phy: +- if (pcie->phy) +- phy_power_off(pcie->phy); ++ phy_power_off(pcie->phy); + err_exit_phy: +- if (pcie->phy) +- phy_exit(pcie->phy); +- ++ phy_exit(pcie->phy); + return ret; + } + EXPORT_SYMBOL(iproc_pcie_setup); +@@ -254,10 +248,8 @@ int iproc_pcie_remove(struct iproc_pcie + pci_stop_root_bus(pcie->root_bus); + pci_remove_root_bus(pcie->root_bus); + +- if (pcie->phy) { +- phy_power_off(pcie->phy); +- phy_exit(pcie->phy); +- } ++ phy_power_off(pcie->phy); ++ phy_exit(pcie->phy); + + return 0; + } diff --git a/target/linux/bcm53xx/patches-4.1/037-PCI-iproc-enable-arm64-support-for-iProc-PCIe.patch b/target/linux/bcm53xx/patches-4.1/037-PCI-iproc-enable-arm64-support-for-iProc-PCIe.patch new file mode 100644 index 0000000000..641efd87bc --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/037-PCI-iproc-enable-arm64-support-for-iProc-PCIe.patch @@ -0,0 +1,116 @@ +From db9d6d790968fd6df9faa7fa1f51967e05afd492 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Mon, 27 Jul 2015 15:42:18 -0700 +Subject: [PATCH 37/40] PCI: iproc: enable arm64 support for iProc PCIe + +PCI: iproc: Add arm64 support + +Add arm64 support to the iProc PCIe driver. + +Note that on arm32, bus->sysdata points to the arm32-specific +pci_sys_data struct, and pci_sys_data.private_data contains the +iproc_pcie pointer. For arm64, there's nothing corresponding to +pci_sys_data, so we keep the iproc_pcie pointer directly in +bus->sysdata. + +In addition, arm64 does IRQ mapping in pcibios_add_device(), so it +doesn't need pci_fixup_irqs() as arm32 does. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +Reviewed-by: Scott Branden +Acked-by: Bjorn Helgaas +Signed-off-by: Olof Johansson +--- + drivers/pci/host/pcie-iproc.c | 27 ++++++++++++++++++++------- + drivers/pci/host/pcie-iproc.h | 4 +++- + 2 files changed, 23 insertions(+), 8 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -58,9 +58,17 @@ + #define SYS_RC_INTX_EN 0x330 + #define SYS_RC_INTX_MASK 0xf + +-static inline struct iproc_pcie *sys_to_pcie(struct pci_sys_data *sys) ++static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) + { +- return sys->private_data; ++ struct iproc_pcie *pcie; ++#ifdef CONFIG_ARM ++ struct pci_sys_data *sys = bus->sysdata; ++ ++ pcie = sys->private_data; ++#else ++ pcie = bus->sysdata; ++#endif ++ return pcie; + } + + /** +@@ -71,8 +79,7 @@ static void __iomem *iproc_pcie_map_cfg_ + unsigned int devfn, + int where) + { +- struct pci_sys_data *sys = bus->sysdata; +- struct iproc_pcie *pcie = sys_to_pcie(sys); ++ struct iproc_pcie *pcie = iproc_data(bus); + unsigned slot = PCI_SLOT(devfn); + unsigned fn = PCI_FUNC(devfn); + unsigned busno = bus->number; +@@ -186,6 +193,7 @@ static void iproc_pcie_enable(struct ipr + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res) + { + int ret; ++ void *sysdata; + struct pci_bus *bus; + + if (!pcie || !pcie->dev || !pcie->base) +@@ -205,10 +213,13 @@ int iproc_pcie_setup(struct iproc_pcie * + + iproc_pcie_reset(pcie); + ++#ifdef CONFIG_ARM + pcie->sysdata.private_data = pcie; +- +- bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops, +- &pcie->sysdata, res); ++ sysdata = &pcie->sysdata; ++#else ++ sysdata = pcie; ++#endif ++ bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops, sysdata, res); + if (!bus) { + dev_err(pcie->dev, "unable to create PCI root bus\n"); + ret = -ENOMEM; +@@ -226,7 +237,9 @@ int iproc_pcie_setup(struct iproc_pcie * + + pci_scan_child_bus(bus); + pci_assign_unassigned_bus_resources(bus); ++#ifdef CONFIG_ARM + pci_fixup_irqs(pci_common_swizzle, pcie->map_irq); ++#endif + pci_bus_add_devices(bus); + + return 0; +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -21,7 +21,7 @@ + * @dev: pointer to device data structure + * @base: PCIe host controller I/O register base + * @resources: linked list of all PCI resources +- * @sysdata: Per PCI controller data ++ * @sysdata: Per PCI controller data (ARM-specific) + * @root_bus: pointer to root bus + * @phy: optional PHY device that controls the Serdes + * @irqs: interrupt IDs +@@ -29,7 +29,9 @@ + struct iproc_pcie { + struct device *dev; + void __iomem *base; ++#ifdef CONFIG_ARM + struct pci_sys_data sysdata; ++#endif + struct pci_bus *root_bus; + struct phy *phy; + int irqs[IPROC_PCIE_MAX_NUM_IRQS]; diff --git a/target/linux/bcm53xx/patches-4.1/038-PCI-iproc-Fix-ARM64-dependency-in-Kconfig.patch b/target/linux/bcm53xx/patches-4.1/038-PCI-iproc-Fix-ARM64-dependency-in-Kconfig.patch new file mode 100644 index 0000000000..75847afc53 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/038-PCI-iproc-Fix-ARM64-dependency-in-Kconfig.patch @@ -0,0 +1,27 @@ +From b00c4415fb231f276221c634a47ce7328df9aae5 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Mon, 27 Jul 2015 15:42:19 -0700 +Subject: [PATCH 38/40] PCI: iproc: Fix ARM64 dependency in Kconfig + +Allow Broadcom iProc PCIe core driver to be compiled for ARM64 + +Signed-off-by: Ray Jui +Reviewed-by: Vikram Prakash +Reviewed-by: Scott Branden +Acked-by: Bjorn Helgaas +Signed-off-by: Olof Johansson +--- + drivers/pci/host/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/host/Kconfig ++++ b/drivers/pci/host/Kconfig +@@ -108,7 +108,7 @@ config PCI_VERSATILE + + config PCIE_IPROC + tristate "Broadcom iProc PCIe controller" +- depends on OF && ARM ++ depends on OF && (ARM || ARM64) + default n + help + This enables the iProc PCIe core controller support for Broadcom's diff --git a/target/linux/bcm53xx/patches-4.1/140-PCI-iproc-Fix-code-comment-to-match-code.patch b/target/linux/bcm53xx/patches-4.1/140-PCI-iproc-Fix-code-comment-to-match-code.patch new file mode 100644 index 0000000000..c018105159 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/140-PCI-iproc-Fix-code-comment-to-match-code.patch @@ -0,0 +1,28 @@ +From 5d92f41c48c5e3c6fa5be87e3d6fca57e2fbb127 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:15 -0700 +Subject: [PATCH 140/147] PCI: iproc: Fix code comment to match code + +Fix code comment in pcie-iproc.h so it matches the code. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +--- + drivers/pci/host/pcie-iproc.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -20,11 +20,11 @@ + * iProc PCIe device + * @dev: pointer to device data structure + * @base: PCIe host controller I/O register base +- * @resources: linked list of all PCI resources + * @sysdata: Per PCI controller data (ARM-specific) + * @root_bus: pointer to root bus + * @phy: optional PHY device that controls the Serdes + * @irqs: interrupt IDs ++ * @map_irq: function callback to map interrupts + */ + struct iproc_pcie { + struct device *dev; diff --git a/target/linux/bcm53xx/patches-4.1/141-PCI-iproc-Remove-unused-struct-iproc_pcie.irqs.patch b/target/linux/bcm53xx/patches-4.1/141-PCI-iproc-Remove-unused-struct-iproc_pcie.irqs.patch new file mode 100644 index 0000000000..e16822fae7 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/141-PCI-iproc-Remove-unused-struct-iproc_pcie.irqs.patch @@ -0,0 +1,33 @@ +From 98aac697a83db6e1d004e5d61cf6c976a0b1c35a Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:16 -0700 +Subject: [PATCH 141/147] PCI: iproc: Remove unused struct iproc_pcie.irqs[] + +Remove unused struct iproc_pcie member irqs[] and unused #define +IPROC_PCIE_MAX_NUM_IRQS. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +--- + drivers/pci/host/pcie-iproc.h | 3 --- + 1 file changed, 3 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -14,8 +14,6 @@ + #ifndef _PCIE_IPROC_H + #define _PCIE_IPROC_H + +-#define IPROC_PCIE_MAX_NUM_IRQS 6 +- + /** + * iProc PCIe device + * @dev: pointer to device data structure +@@ -34,7 +32,6 @@ struct iproc_pcie { + #endif + struct pci_bus *root_bus; + struct phy *phy; +- int irqs[IPROC_PCIE_MAX_NUM_IRQS]; + int (*map_irq)(const struct pci_dev *, u8, u8); + }; + diff --git a/target/linux/bcm53xx/patches-4.1/142-PCI-iproc-Call-pci_fixup_irqs-for-ARM64-as-well-as-A.patch b/target/linux/bcm53xx/patches-4.1/142-PCI-iproc-Call-pci_fixup_irqs-for-ARM64-as-well-as-A.patch new file mode 100644 index 0000000000..c309ef45f2 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/142-PCI-iproc-Call-pci_fixup_irqs-for-ARM64-as-well-as-A.patch @@ -0,0 +1,31 @@ +From bdb8a1844f3113ec08915d1e8e3fd5686fb2fb78 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:17 -0700 +Subject: [PATCH 142/147] PCI: iproc: Call pci_fixup_irqs() for ARM64 as well + as ARM + +After 459a07721c11 ("PCI: Build setup-irq.o for arm64"), we build +setup-irq.o for arm64, so we can use pci_fixup_irqs() on both arm and +arm64. + +Remove the "#ifdef CONFIG_ARM" around the call to pci_fixup_irqs(). + +[bhelgaas: changelog] +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +--- + drivers/pci/host/pcie-iproc.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -237,9 +237,7 @@ int iproc_pcie_setup(struct iproc_pcie * + + pci_scan_child_bus(bus); + pci_assign_unassigned_bus_resources(bus); +-#ifdef CONFIG_ARM + pci_fixup_irqs(pci_common_swizzle, pcie->map_irq); +-#endif + pci_bus_add_devices(bus); + + return 0; diff --git a/target/linux/bcm53xx/patches-4.1/143-PCI-iproc-Fix-PCIe-reset-logic.patch b/target/linux/bcm53xx/patches-4.1/143-PCI-iproc-Fix-PCIe-reset-logic.patch new file mode 100644 index 0000000000..b9020a5ac8 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/143-PCI-iproc-Fix-PCIe-reset-logic.patch @@ -0,0 +1,62 @@ +From 199ff14100095d52cd1b232cc0f3b12f348b5b07 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:18 -0700 +Subject: [PATCH 143/147] PCI: iproc: Fix PCIe reset logic + +The current reset logic does not always properly reset the device. For +example, in the case when the perst_b signal is already de-asserted in the +bootloader, the current reset logic fails to trigger a proper assert -> +de-assert reset sequence. + +Fix the issue by always triggering the proper reset sequence. + +Also explicitly select the desired reset source, i.e., perst_b, and reduce +the wait time after the device comes out of reset from 250 ms to 100 ms, +based on recommendation from the ASIC team. + +Tested-by: Vladimir Dreizin +Tested-by: Darren Edamura +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +Reviewed-by: Vladimir Dreizin +Reviewed-by: Trac Hoang +Reviewed-by: Scott Branden +--- + drivers/pci/host/pcie-iproc.c | 15 ++++++++++----- + 1 file changed, 10 insertions(+), 5 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -31,6 +31,8 @@ + #include "pcie-iproc.h" + + #define CLK_CONTROL_OFFSET 0x000 ++#define EP_PERST_SOURCE_SELECT_SHIFT 2 ++#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) + #define EP_MODE_SURVIVE_PERST_SHIFT 1 + #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) + #define RC_PCIE_RST_OUTPUT_SHIFT 0 +@@ -119,15 +121,18 @@ static void iproc_pcie_reset(struct ipro + u32 val; + + /* +- * Configure the PCIe controller as root complex and send a downstream +- * reset ++ * Select perst_b signal as reset source. Put the device into reset, ++ * and then bring it out of reset + */ +- val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT; ++ val = readl(pcie->base + CLK_CONTROL_OFFSET); ++ val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & ++ ~RC_PCIE_RST_OUTPUT; + writel(val, pcie->base + CLK_CONTROL_OFFSET); + udelay(250); +- val &= ~EP_MODE_SURVIVE_PERST; ++ ++ val |= RC_PCIE_RST_OUTPUT; + writel(val, pcie->base + CLK_CONTROL_OFFSET); +- msleep(250); ++ msleep(100); + } + + static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus) diff --git a/target/linux/bcm53xx/patches-4.1/144-PCI-iproc-Improve-link-detection-logic.patch b/target/linux/bcm53xx/patches-4.1/144-PCI-iproc-Improve-link-detection-logic.patch new file mode 100644 index 0000000000..3fecba2b26 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/144-PCI-iproc-Improve-link-detection-logic.patch @@ -0,0 +1,84 @@ +From aaf22ab4e916afa68a2e1aed4e913b76cbd58276 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:19 -0700 +Subject: [PATCH 144/147] PCI: iproc: Improve link detection logic + +Improve the link detection logic by explicitly querying the link status +register to ensure link is active. + +Also force class to PCI_CLASS_BRIDGE_PCI (0x0604) through the host +configuration space register. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +Reviewed-by: Anup Patel +Reviewed-by: Scott Branden +--- + drivers/pci/host/pcie-iproc.c | 29 +++++++++++++++++++++++------ + 1 file changed, 23 insertions(+), 6 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -60,6 +60,12 @@ + #define SYS_RC_INTX_EN 0x330 + #define SYS_RC_INTX_MASK 0xf + ++#define PCIE_LINK_STATUS_OFFSET 0xf0c ++#define PCIE_PHYLINKUP_SHIFT 3 ++#define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT) ++#define PCIE_DL_ACTIVE_SHIFT 2 ++#define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT) ++ + static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) + { + struct iproc_pcie *pcie; +@@ -138,9 +144,15 @@ static void iproc_pcie_reset(struct ipro + static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus) + { + u8 hdr_type; +- u32 link_ctrl; ++ u32 link_ctrl, class, val; + u16 pos, link_status; +- int link_is_active = 0; ++ bool link_is_active = false; ++ ++ val = readl(pcie->base + PCIE_LINK_STATUS_OFFSET); ++ if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) { ++ dev_err(pcie->dev, "PHY or data link is INACTIVE!\n"); ++ return -ENODEV; ++ } + + /* make sure we are not in EP mode */ + pci_bus_read_config_byte(bus, 0, PCI_HEADER_TYPE, &hdr_type); +@@ -150,14 +162,19 @@ static int iproc_pcie_check_link(struct + } + + /* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */ +- pci_bus_write_config_word(bus, 0, PCI_CLASS_DEVICE, +- PCI_CLASS_BRIDGE_PCI); ++#define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c ++#define PCI_CLASS_BRIDGE_MASK 0xffff00 ++#define PCI_CLASS_BRIDGE_SHIFT 8 ++ pci_bus_read_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, &class); ++ class &= ~PCI_CLASS_BRIDGE_MASK; ++ class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT); ++ pci_bus_write_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, class); + + /* check link status to see if link is active */ + pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP); + pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, &link_status); + if (link_status & PCI_EXP_LNKSTA_NLW) +- link_is_active = 1; ++ link_is_active = true; + + if (!link_is_active) { + /* try GEN 1 link speed */ +@@ -181,7 +198,7 @@ static int iproc_pcie_check_link(struct + pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, + &link_status); + if (link_status & PCI_EXP_LNKSTA_NLW) +- link_is_active = 1; ++ link_is_active = true; + } + } + diff --git a/target/linux/bcm53xx/patches-4.1/145-PCI-iproc-Update-PCIe-device-tree-bindings.patch b/target/linux/bcm53xx/patches-4.1/145-PCI-iproc-Update-PCIe-device-tree-bindings.patch new file mode 100644 index 0000000000..eb5bb64bba --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/145-PCI-iproc-Update-PCIe-device-tree-bindings.patch @@ -0,0 +1,50 @@ +From 8d0afa1a93be2da954c85392bbc7b2264c9d241c Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:20 -0700 +Subject: [PATCH 145/147] PCI: iproc: Update PCIe device tree bindings + +Update the device tree bindings with added support for outbound mapping +configurations. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +--- + .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt ++++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +@@ -17,6 +17,21 @@ Optional properties: + - phys: phandle of the PCIe PHY device + - phy-names: must be "pcie-phy" + ++- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done ++by the ASIC after power on reset. In this case, SW needs to configure it ++ ++If the brcm,pcie-ob property is present, the following properties become ++effective: ++ ++Required: ++- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal ++address used by the iProc PCIe core (not the PCIe address) ++- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) ++ ++Optional: ++- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to ++increase the outbound window size ++ + Example: + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; +@@ -38,6 +53,11 @@ Example: + + phys = <&phy 0 5>; + phy-names = "pcie-phy"; ++ ++ brcm,pcie-ob; ++ brcm,pcie-ob-oarr-size; ++ brcm,pcie-ob-axi-offset = <0x00000000>; ++ brcm,pcie-ob-window-size = <256>; + }; + + pcie1: pcie@18013000 { diff --git a/target/linux/bcm53xx/patches-4.1/146-PCI-iproc-Add-outbound-mapping-support.patch b/target/linux/bcm53xx/patches-4.1/146-PCI-iproc-Add-outbound-mapping-support.patch new file mode 100644 index 0000000000..b65d3057bc --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/146-PCI-iproc-Add-outbound-mapping-support.patch @@ -0,0 +1,236 @@ +From e99a187b5c5f60fe55ca586f82ac1a3557fb166a Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Fri, 16 Oct 2015 08:18:24 -0500 +Subject: [PATCH 146/147] PCI: iproc: Add outbound mapping support + +Certain SoCs require the PCIe outbound mapping to be configured in +software. Add support for those chips. + +[jonmason: Use %pap format when printing size_t to avoid warnings in 32-bit +build.] +[arnd: Use div64_u64() instead of "%" to avoid __aeabi_uldivmod link error +in 32-bit build.] +Signed-off-by: Ray Jui +Signed-off-by: Jon Mason +Signed-off-by: Arnd Bergmann +Signed-off-by: Bjorn Helgaas +--- + drivers/pci/host/pcie-iproc-platform.c | 27 ++++++++ + drivers/pci/host/pcie-iproc.c | 115 +++++++++++++++++++++++++++++++++ + drivers/pci/host/pcie-iproc.h | 17 +++++ + 3 files changed, 159 insertions(+) + +--- a/drivers/pci/host/pcie-iproc-platform.c ++++ b/drivers/pci/host/pcie-iproc-platform.c +@@ -54,6 +54,33 @@ static int iproc_pcie_pltfm_probe(struct + return -ENOMEM; + } + ++ if (of_property_read_bool(np, "brcm,pcie-ob")) { ++ u32 val; ++ ++ ret = of_property_read_u32(np, "brcm,pcie-ob-axi-offset", ++ &val); ++ if (ret) { ++ dev_err(pcie->dev, ++ "missing brcm,pcie-ob-axi-offset property\n"); ++ return ret; ++ } ++ pcie->ob.axi_offset = val; ++ ++ ret = of_property_read_u32(np, "brcm,pcie-ob-window-size", ++ &val); ++ if (ret) { ++ dev_err(pcie->dev, ++ "missing brcm,pcie-ob-window-size property\n"); ++ return ret; ++ } ++ pcie->ob.window_size = (resource_size_t)val * SZ_1M; ++ ++ if (of_property_read_bool(np, "brcm,pcie-ob-oarr-size")) ++ pcie->ob.set_oarr_size = true; ++ ++ pcie->need_ob_cfg = true; ++ } ++ + /* PHY use is optional */ + pcie->phy = devm_phy_get(&pdev->dev, "pcie-phy"); + if (IS_ERR(pcie->phy)) { +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -66,6 +66,18 @@ + #define PCIE_DL_ACTIVE_SHIFT 2 + #define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT) + ++#define OARR_VALID_SHIFT 0 ++#define OARR_VALID BIT(OARR_VALID_SHIFT) ++#define OARR_SIZE_CFG_SHIFT 1 ++#define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT) ++ ++#define OARR_LO(window) (0xd20 + (window) * 8) ++#define OARR_HI(window) (0xd24 + (window) * 8) ++#define OMAP_LO(window) (0xd40 + (window) * 8) ++#define OMAP_HI(window) (0xd44 + (window) * 8) ++ ++#define MAX_NUM_OB_WINDOWS 2 ++ + static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) + { + struct iproc_pcie *pcie; +@@ -212,6 +224,101 @@ static void iproc_pcie_enable(struct ipr + writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN); + } + ++/** ++ * Some iProc SoCs require the SW to configure the outbound address mapping ++ * ++ * Outbound address translation: ++ * ++ * iproc_pcie_address = axi_address - axi_offset ++ * OARR = iproc_pcie_address ++ * OMAP = pci_addr ++ * ++ * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address ++ */ ++static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr, ++ u64 pci_addr, resource_size_t size) ++{ ++ struct iproc_pcie_ob *ob = &pcie->ob; ++ unsigned i; ++ u64 max_size = (u64)ob->window_size * MAX_NUM_OB_WINDOWS; ++ u64 remainder; ++ ++ if (size > max_size) { ++ dev_err(pcie->dev, ++ "res size 0x%pap exceeds max supported size 0x%llx\n", ++ &size, max_size); ++ return -EINVAL; ++ } ++ ++ div64_u64_rem(size, ob->window_size, &remainder); ++ if (remainder) { ++ dev_err(pcie->dev, ++ "res size %pap needs to be multiple of window size %pap\n", ++ &size, &ob->window_size); ++ return -EINVAL; ++ } ++ ++ if (axi_addr < ob->axi_offset) { ++ dev_err(pcie->dev, ++ "axi address %pap less than offset %pap\n", ++ &axi_addr, &ob->axi_offset); ++ return -EINVAL; ++ } ++ ++ /* ++ * Translate the AXI address to the internal address used by the iProc ++ * PCIe core before programming the OARR ++ */ ++ axi_addr -= ob->axi_offset; ++ ++ for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) { ++ writel(lower_32_bits(axi_addr) | OARR_VALID | ++ (ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i)); ++ writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i)); ++ writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i)); ++ writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i)); ++ ++ size -= ob->window_size; ++ if (size == 0) ++ break; ++ ++ axi_addr += ob->window_size; ++ pci_addr += ob->window_size; ++ } ++ ++ return 0; ++} ++ ++static int iproc_pcie_map_ranges(struct iproc_pcie *pcie, ++ struct list_head *resources) ++{ ++ struct resource_entry *window; ++ int ret; ++ ++ resource_list_for_each_entry(window, resources) { ++ struct resource *res = window->res; ++ u64 res_type = resource_type(res); ++ ++ switch (res_type) { ++ case IORESOURCE_IO: ++ case IORESOURCE_BUS: ++ break; ++ case IORESOURCE_MEM: ++ ret = iproc_pcie_setup_ob(pcie, res->start, ++ res->start - window->offset, ++ resource_size(res)); ++ if (ret) ++ return ret; ++ break; ++ default: ++ dev_err(pcie->dev, "invalid resource %pR\n", res); ++ return -EINVAL; ++ } ++ } ++ ++ return 0; ++} ++ + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res) + { + int ret; +@@ -235,6 +342,14 @@ int iproc_pcie_setup(struct iproc_pcie * + + iproc_pcie_reset(pcie); + ++ if (pcie->need_ob_cfg) { ++ ret = iproc_pcie_map_ranges(pcie, res); ++ if (ret) { ++ dev_err(pcie->dev, "map failed\n"); ++ goto err_power_off_phy; ++ } ++ } ++ + #ifdef CONFIG_ARM + pcie->sysdata.private_data = pcie; + sysdata = &pcie->sysdata; +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -15,6 +15,19 @@ + #define _PCIE_IPROC_H + + /** ++ * iProc PCIe outbound mapping ++ * @set_oarr_size: indicates the OARR size bit needs to be set ++ * @axi_offset: offset from the AXI address to the internal address used by ++ * the iProc PCIe core ++ * @window_size: outbound window size ++ */ ++struct iproc_pcie_ob { ++ bool set_oarr_size; ++ resource_size_t axi_offset; ++ resource_size_t window_size; ++}; ++ ++/** + * iProc PCIe device + * @dev: pointer to device data structure + * @base: PCIe host controller I/O register base +@@ -23,6 +36,8 @@ + * @phy: optional PHY device that controls the Serdes + * @irqs: interrupt IDs + * @map_irq: function callback to map interrupts ++ * @need_ob_cfg: indidates SW needs to configure the outbound mapping window ++ * @ob: outbound mapping parameters + */ + struct iproc_pcie { + struct device *dev; +@@ -33,6 +48,8 @@ struct iproc_pcie { + struct pci_bus *root_bus; + struct phy *phy; + int (*map_irq)(const struct pci_dev *, u8, u8); ++ bool need_ob_cfg; ++ struct iproc_pcie_ob ob; + }; + + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res); diff --git a/target/linux/bcm53xx/patches-4.1/147-PCI-iproc-Fix-header-comment-Corporation-misspelling.patch b/target/linux/bcm53xx/patches-4.1/147-PCI-iproc-Fix-header-comment-Corporation-misspelling.patch new file mode 100644 index 0000000000..9ad5f00c04 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/147-PCI-iproc-Fix-header-comment-Corporation-misspelling.patch @@ -0,0 +1,25 @@ +From be908d21b2e9c2cab1ef568dfca4f9777611b3dd Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Fri, 16 Oct 2015 12:04:04 -0700 +Subject: [PATCH 147/147] PCI: iproc: Fix header comment "Corporation" + misspelling + +Fix an obvious "Broadcom Corporation" typo in a header comment. + +Signed-off-by: Florian Fainelli +Signed-off-by: Bjorn Helgaas +Acked-by: Ray Jui +--- + drivers/pci/host/pcie-iproc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -1,6 +1,6 @@ + /* + * Copyright (C) 2014 Hauke Mehrtens +- * Copyright (C) 2015 Broadcom Corporatcommon ion ++ * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as diff --git a/target/linux/bcm53xx/patches-4.1/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch b/target/linux/bcm53xx/patches-4.1/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch new file mode 100644 index 0000000000..7d6949f234 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch @@ -0,0 +1,29 @@ +From d85a955118c8d8679d4f746fe2189c172d7c365f Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Mon, 16 Nov 2015 17:18:05 -0800 +Subject: [PATCH 150/154] PCI: iproc: Update iProc PCIe device tree binding + +Add a new compatible string "brcm,iproc-pcie-paxc", for PAXC based iProc +PCIe root complex. A PAXC based PCIe root complex is connected to +emulated endpoint devices internal to the ASIC + +Signed-off-by: Ray Jui +Reviewed-by: Scott Branden +--- + Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt ++++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +@@ -1,7 +1,10 @@ + * Broadcom iProc PCIe controller with the platform bus interface + + Required properties: +-- compatible: Must be "brcm,iproc-pcie" ++- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc" ++ for PAXC. PAXB based root complex is used for external endpoint devices. ++ PAXC based root complex is connected to emulated endpoint devices ++ internal to the ASIC + - reg: base address and length of the PCIe controller I/O register space + - #interrupt-cells: set to <1> + - interrupt-map-mask and interrupt-map, standard PCI properties to define the diff --git a/target/linux/bcm53xx/patches-4.1/151-PCI-iproc-Add-PAXC-interface-support.patch b/target/linux/bcm53xx/patches-4.1/151-PCI-iproc-Add-PAXC-interface-support.patch new file mode 100644 index 0000000000..9b7b762241 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/151-PCI-iproc-Add-PAXC-interface-support.patch @@ -0,0 +1,428 @@ +From a13fc4733b25d6dad6ec1826f09225c69ee21e3a Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Mon, 16 Nov 2015 17:41:43 -0800 +Subject: [PATCH 151/154] PCI: iproc: Add PAXC interface support + +Traditionally, all iProc PCIe root complexes use PAXB based wrapper, +with an integrated on-chip Serdes to support external endpoint devices. +On newer iProc platforms, a PAXC based wrapper is introduced, for +connection with internally emulated PCIe endpoint devices in the ASIC + +This patch adds support for PAXC based iProc PCIe root complex in the +iProc PCIe core driver. This change fators out common logic between +PAXB and PAXC, and use tables to store register offsets that are +different between PAXB and PAXC. This allows the driver to be scaled to +support subsequent PAXC revisions in the future + +Signed-off-by: Ray Jui +Reviewed-by: Scott Branden +--- + drivers/pci/host/pcie-iproc-platform.c | 24 +++- + drivers/pci/host/pcie-iproc.c | 202 +++++++++++++++++++++++++++------ + drivers/pci/host/pcie-iproc.h | 19 ++++ + 3 files changed, 205 insertions(+), 40 deletions(-) + +--- a/drivers/pci/host/pcie-iproc-platform.c ++++ b/drivers/pci/host/pcie-iproc-platform.c +@@ -26,8 +26,21 @@ + + #include "pcie-iproc.h" + ++static const struct of_device_id iproc_pcie_of_match_table[] = { ++ { ++ .compatible = "brcm,iproc-pcie", ++ .data = (int *)IPROC_PCIE_PAXB, ++ }, { ++ .compatible = "brcm,iproc-pcie-paxc", ++ .data = (int *)IPROC_PCIE_PAXC, ++ }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table); ++ + static int iproc_pcie_pltfm_probe(struct platform_device *pdev) + { ++ const struct of_device_id *of_id; + struct iproc_pcie *pcie; + struct device_node *np = pdev->dev.of_node; + struct resource reg; +@@ -35,11 +48,16 @@ static int iproc_pcie_pltfm_probe(struct + LIST_HEAD(res); + int ret; + ++ of_id = of_match_device(iproc_pcie_of_match_table, &pdev->dev); ++ if (!of_id) ++ return -EINVAL; ++ + pcie = devm_kzalloc(&pdev->dev, sizeof(struct iproc_pcie), GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pcie->dev = &pdev->dev; ++ pcie->type = (enum iproc_pcie_type)of_id->data; + platform_set_drvdata(pdev, pcie); + + ret = of_address_to_resource(np, 0, ®); +@@ -114,12 +132,6 @@ static int iproc_pcie_pltfm_remove(struc + return iproc_pcie_remove(pcie); + } + +-static const struct of_device_id iproc_pcie_of_match_table[] = { +- { .compatible = "brcm,iproc-pcie", }, +- { /* sentinel */ } +-}; +-MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table); +- + static struct platform_driver iproc_pcie_pltfm_driver = { + .driver = { + .name = "iproc-pcie", +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -30,20 +30,16 @@ + + #include "pcie-iproc.h" + +-#define CLK_CONTROL_OFFSET 0x000 + #define EP_PERST_SOURCE_SELECT_SHIFT 2 + #define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) + #define EP_MODE_SURVIVE_PERST_SHIFT 1 + #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) + #define RC_PCIE_RST_OUTPUT_SHIFT 0 + #define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT) ++#define PAXC_RESET_MASK 0x7f + +-#define CFG_IND_ADDR_OFFSET 0x120 + #define CFG_IND_ADDR_MASK 0x00001ffc + +-#define CFG_IND_DATA_OFFSET 0x124 +- +-#define CFG_ADDR_OFFSET 0x1f8 + #define CFG_ADDR_BUS_NUM_SHIFT 20 + #define CFG_ADDR_BUS_NUM_MASK 0x0ff00000 + #define CFG_ADDR_DEV_NUM_SHIFT 15 +@@ -55,12 +51,8 @@ + #define CFG_ADDR_CFG_TYPE_SHIFT 0 + #define CFG_ADDR_CFG_TYPE_MASK 0x00000003 + +-#define CFG_DATA_OFFSET 0x1fc +- +-#define SYS_RC_INTX_EN 0x330 + #define SYS_RC_INTX_MASK 0xf + +-#define PCIE_LINK_STATUS_OFFSET 0xf0c + #define PCIE_PHYLINKUP_SHIFT 3 + #define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT) + #define PCIE_DL_ACTIVE_SHIFT 2 +@@ -71,12 +63,54 @@ + #define OARR_SIZE_CFG_SHIFT 1 + #define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT) + +-#define OARR_LO(window) (0xd20 + (window) * 8) +-#define OARR_HI(window) (0xd24 + (window) * 8) +-#define OMAP_LO(window) (0xd40 + (window) * 8) +-#define OMAP_HI(window) (0xd44 + (window) * 8) +- + #define MAX_NUM_OB_WINDOWS 2 ++#define MAX_NUM_PAXC_PF 4 ++ ++#define IPROC_PCIE_REG_INVALID 0xffff ++ ++enum iproc_pcie_reg { ++ IPROC_PCIE_CLK_CTRL = 0, ++ IPROC_PCIE_CFG_IND_ADDR, ++ IPROC_PCIE_CFG_IND_DATA, ++ IPROC_PCIE_CFG_ADDR, ++ IPROC_PCIE_CFG_DATA, ++ IPROC_PCIE_INTX_EN, ++ IPROC_PCIE_OARR_LO, ++ IPROC_PCIE_OARR_HI, ++ IPROC_PCIE_OMAP_LO, ++ IPROC_PCIE_OMAP_HI, ++ IPROC_PCIE_LINK_STATUS, ++}; ++ ++/* iProc PCIe PAXB registers */ ++static const u16 iproc_pcie_reg_paxb[] = { ++ [IPROC_PCIE_CLK_CTRL] = 0x000, ++ [IPROC_PCIE_CFG_IND_ADDR] = 0x120, ++ [IPROC_PCIE_CFG_IND_DATA] = 0x124, ++ [IPROC_PCIE_CFG_ADDR] = 0x1f8, ++ [IPROC_PCIE_CFG_DATA] = 0x1fc, ++ [IPROC_PCIE_INTX_EN] = 0x330, ++ [IPROC_PCIE_OARR_LO] = 0xd20, ++ [IPROC_PCIE_OARR_HI] = 0xd24, ++ [IPROC_PCIE_OMAP_LO] = 0xd40, ++ [IPROC_PCIE_OMAP_HI] = 0xd44, ++ [IPROC_PCIE_LINK_STATUS] = 0xf0c, ++}; ++ ++/* iProc PCIe PAXC v1 registers */ ++static const u16 iproc_pcie_reg_paxc[] = { ++ [IPROC_PCIE_CLK_CTRL] = 0x000, ++ [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0, ++ [IPROC_PCIE_CFG_IND_DATA] = 0x1f4, ++ [IPROC_PCIE_CFG_ADDR] = 0x1f8, ++ [IPROC_PCIE_CFG_DATA] = 0x1fc, ++ [IPROC_PCIE_INTX_EN] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_OARR_LO] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_OARR_HI] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_OMAP_LO] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_OMAP_HI] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_LINK_STATUS] = IPROC_PCIE_REG_INVALID, ++}; + + static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) + { +@@ -91,6 +125,65 @@ static inline struct iproc_pcie *iproc_d + return pcie; + } + ++static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset) ++{ ++ return !!(reg_offset == IPROC_PCIE_REG_INVALID); ++} ++ ++static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie, ++ enum iproc_pcie_reg reg) ++{ ++ return pcie->reg_offsets[reg]; ++} ++ ++static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie, ++ enum iproc_pcie_reg reg) ++{ ++ u16 offset = iproc_pcie_reg_offset(pcie, reg); ++ ++ if (iproc_pcie_reg_is_invalid(offset)) ++ return 0; ++ ++ return readl(pcie->base + offset); ++} ++ ++static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie, ++ enum iproc_pcie_reg reg, u32 val) ++{ ++ u16 offset = iproc_pcie_reg_offset(pcie, reg); ++ ++ if (iproc_pcie_reg_is_invalid(offset)) ++ return; ++ ++ writel(val, pcie->base + offset); ++} ++ ++static inline void iproc_pcie_ob_write(struct iproc_pcie *pcie, ++ enum iproc_pcie_reg reg, ++ unsigned window, u32 val) ++{ ++ u16 offset = iproc_pcie_reg_offset(pcie, reg); ++ ++ if (iproc_pcie_reg_is_invalid(offset)) ++ return; ++ ++ writel(val, pcie->base + offset + (window * 8)); ++} ++ ++static inline bool iproc_pcie_device_is_valid(struct iproc_pcie *pcie, ++ unsigned int slot, ++ unsigned int fn) ++{ ++ if (slot > 0) ++ return false; ++ ++ /* PAXC can only support limited number of functions */ ++ if (pcie->type == IPROC_PCIE_PAXC && fn >= MAX_NUM_PAXC_PF) ++ return false; ++ ++ return true; ++} ++ + /** + * Note access to the configuration registers are protected at the higher layer + * by 'pci_lock' in drivers/pci/access.c +@@ -104,28 +197,34 @@ static void __iomem *iproc_pcie_map_cfg_ + unsigned fn = PCI_FUNC(devfn); + unsigned busno = bus->number; + u32 val; ++ u16 offset; ++ ++ if (!iproc_pcie_device_is_valid(pcie, slot, fn)) ++ return NULL; + + /* root complex access */ + if (busno == 0) { +- if (slot >= 1) ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR, ++ where & CFG_IND_ADDR_MASK); ++ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA); ++ if (iproc_pcie_reg_is_invalid(offset)) + return NULL; +- writel(where & CFG_IND_ADDR_MASK, +- pcie->base + CFG_IND_ADDR_OFFSET); +- return (pcie->base + CFG_IND_DATA_OFFSET); ++ else ++ return (pcie->base + offset); + } + +- if (fn > 1) +- return NULL; +- + /* EP device access */ + val = (busno << CFG_ADDR_BUS_NUM_SHIFT) | + (slot << CFG_ADDR_DEV_NUM_SHIFT) | + (fn << CFG_ADDR_FUNC_NUM_SHIFT) | + (where & CFG_ADDR_REG_NUM_MASK) | + (1 & CFG_ADDR_CFG_TYPE_MASK); +- writel(val, pcie->base + CFG_ADDR_OFFSET); +- +- return (pcie->base + CFG_DATA_OFFSET); ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val); ++ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA); ++ if (iproc_pcie_reg_is_invalid(offset)) ++ return NULL; ++ else ++ return (pcie->base + offset); + } + + static struct pci_ops iproc_pcie_ops = { +@@ -138,18 +237,29 @@ static void iproc_pcie_reset(struct ipro + { + u32 val; + ++ if (pcie->type == IPROC_PCIE_PAXC) { ++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); ++ val &= ~PAXC_RESET_MASK; ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); ++ udelay(100); ++ val |= PAXC_RESET_MASK; ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); ++ udelay(100); ++ return; ++ } ++ + /* + * Select perst_b signal as reset source. Put the device into reset, + * and then bring it out of reset + */ +- val = readl(pcie->base + CLK_CONTROL_OFFSET); ++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); + val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & + ~RC_PCIE_RST_OUTPUT; +- writel(val, pcie->base + CLK_CONTROL_OFFSET); ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); + udelay(250); + + val |= RC_PCIE_RST_OUTPUT; +- writel(val, pcie->base + CLK_CONTROL_OFFSET); ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); + msleep(100); + } + +@@ -160,7 +270,14 @@ static int iproc_pcie_check_link(struct + u16 pos, link_status; + bool link_is_active = false; + +- val = readl(pcie->base + PCIE_LINK_STATUS_OFFSET); ++ /* ++ * PAXC connects to emulated endpoint devices directly and does not ++ * have a Serdes. Therefore skip the link detection logic here ++ */ ++ if (pcie->type == IPROC_PCIE_PAXC) ++ return 0; ++ ++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS); + if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) { + dev_err(pcie->dev, "PHY or data link is INACTIVE!\n"); + return -ENODEV; +@@ -221,7 +338,7 @@ static int iproc_pcie_check_link(struct + + static void iproc_pcie_enable(struct iproc_pcie *pcie) + { +- writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN); ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK); + } + + /** +@@ -272,11 +389,15 @@ static int iproc_pcie_setup_ob(struct ip + axi_addr -= ob->axi_offset; + + for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) { +- writel(lower_32_bits(axi_addr) | OARR_VALID | +- (ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i)); +- writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i)); +- writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i)); +- writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i)); ++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_LO, i, ++ lower_32_bits(axi_addr) | OARR_VALID | ++ (ob->set_oarr_size ? 1 : 0)); ++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_HI, i, ++ upper_32_bits(axi_addr)); ++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_LO, i, ++ lower_32_bits(pci_addr)); ++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_HI, i, ++ upper_32_bits(pci_addr)); + + size -= ob->window_size; + if (size == 0) +@@ -340,6 +461,19 @@ int iproc_pcie_setup(struct iproc_pcie * + goto err_exit_phy; + } + ++ switch (pcie->type) { ++ case IPROC_PCIE_PAXB: ++ pcie->reg_offsets = iproc_pcie_reg_paxb; ++ break; ++ case IPROC_PCIE_PAXC: ++ pcie->reg_offsets = iproc_pcie_reg_paxc; ++ break; ++ default: ++ dev_err(pcie->dev, "incompatible iProc PCIe interface\n"); ++ ret = -EINVAL; ++ goto err_power_off_phy; ++ } ++ + iproc_pcie_reset(pcie); + + if (pcie->need_ob_cfg) { +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -15,6 +15,20 @@ + #define _PCIE_IPROC_H + + /** ++ * iProc PCIe interface type ++ * ++ * PAXB is the wrapper used in root complex that can be connected to an ++ * external endpoint device ++ * ++ * PAXC is the wrapper used in root complex dedicated for internal emulated ++ * endpoint devices ++ */ ++enum iproc_pcie_type { ++ IPROC_PCIE_PAXB = 0, ++ IPROC_PCIE_PAXC, ++}; ++ ++/** + * iProc PCIe outbound mapping + * @set_oarr_size: indicates the OARR size bit needs to be set + * @axi_offset: offset from the AXI address to the internal address used by +@@ -29,7 +43,10 @@ struct iproc_pcie_ob { + + /** + * iProc PCIe device ++ * + * @dev: pointer to device data structure ++ * @type: iProc PCIe interface type ++ * @reg_offsets: register offsets + * @base: PCIe host controller I/O register base + * @sysdata: Per PCI controller data (ARM-specific) + * @root_bus: pointer to root bus +@@ -41,6 +58,8 @@ struct iproc_pcie_ob { + */ + struct iproc_pcie { + struct device *dev; ++ enum iproc_pcie_type type; ++ const u16 *reg_offsets; + void __iomem *base; + #ifdef CONFIG_ARM + struct pci_sys_data sysdata; diff --git a/target/linux/bcm53xx/patches-4.1/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch b/target/linux/bcm53xx/patches-4.1/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch new file mode 100644 index 0000000000..f0b0031237 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch @@ -0,0 +1,67 @@ +From 96b40de5e36ec479dabb88500f1830a87818a809 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Mon, 16 Nov 2015 17:57:33 -0800 +Subject: [PATCH 152/154] PCI: iproc: Add iProc PCIe MSI device tree binding + +This patch updates the iProc PCIe device tree bindings with added +binding information for MSI + +Signed-off-by: Ray Jui +Reviewed-by: Anup Patel +Reviewed-by: Vikram Prakash +Reviewed-by: Scott Branden +--- + .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 35 ++++++++++++++++++++++ + 1 file changed, 35 insertions(+) + +--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt ++++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +@@ -35,6 +35,28 @@ Optional: + - brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to + increase the outbound window size + ++MSI support (optional): ++ ++For older platforms without MSI integrated in the GIC, iProc PCIe core provides ++an event queue based MSI support. The iProc MSI uses host memories to store ++MSI posted writes in the event queues ++ ++- msi-parent: Link to the device node of the MSI controller. On newer iProc ++platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc ++platforms without MSI support in its interrupt controller, one may use the ++event queue based MSI support integrated within the iProc PCIe core ++ ++When the iProc event queue based MSI is used, one needs to define the ++following properties in the MSI device node: ++- compatible: Must be "brcm,iproc-msi" ++- msi-controller: claims itself as an MSI controller ++- interrupt-parent: Link to its parent interrupt device ++- interrupts: List of interrupt IDs from its parent interrupt device ++ ++Optional properties: ++- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that ++require the interrupt enable registers to be set explicitly to enable MSI ++ + Example: + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; +@@ -61,6 +83,19 @@ Example: + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; ++ ++ msi-parent = <&msi0>; ++ ++ /* iProc event queue based MSI */ ++ msi0: msi@18012000 { ++ compatible = "brcm,iproc-msi"; ++ msi-controller; ++ interrupt-parent = <&gic>; ++ interrupts = , ++ , ++ , ++ , ++ }; + }; + + pcie1: pcie@18013000 { diff --git a/target/linux/bcm53xx/patches-4.1/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch b/target/linux/bcm53xx/patches-4.1/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch new file mode 100644 index 0000000000..16eef4f33d --- /dev/null +++ b/target/linux/bcm53xx/patches-4.1/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch @@ -0,0 +1,886 @@ +From c81922174d61127ff5baad6059ae148794c72276 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 17 Nov 2015 13:14:37 -0800 +Subject: [PATCH 153/154] PCI: iproc: Add iProc PCIe MSI support + +This patch adds PCIe MSI support for both PAXB and PAXC interfaces on +all iProc based platforms + +The iProc PCIe MSI support deploys an event queue based implementation. +Each event queue is serviced by a GIC interrupt and can support up to 64 +MSI vectors. Host memory is allocated for the event queues, and each event +queue consists of 64 word-sized entries. MSI data is written to the +lower 16-bit of each entry, whereas the upper 16-bit of the entry is +reserved for the controller for internal processing + +Each event queue is tracked by a head pointer and tail pointer. Head +pointer indicates the next entry in the event queue to be processed by +the driver and is updated by the driver after processing is done. +The controller uses the tail pointer as the next MSI data insertion +point. The controller ensures MSI data is flushed to host memory before +updating the tail pointer and then triggering the interrupt + +MSI IRQ affinity is supported by evenly distributing the interrupts to +each CPU core. MSI vector is moved from one GIC interrupt to another in +order to steer to the target CPU + +Therefore, the actual number of supported MSI vectors is: + +M * 64 / N + +where M denotes the number of GIC interrupts (event queues), and N +denotes the number of CPU cores + +This iProc event queue based MSI support should not be used with newer +platforms with integrated MSI support in the GIC (e.g., giv2m or +gicv3-its) + +Signed-off-by: Ray Jui +Reviewed-by: Anup Patel +Reviewed-by: Vikram Prakash +Reviewed-by: Scott Branden +--- + drivers/pci/host/Kconfig | 9 + + drivers/pci/host/Makefile | 1 + + drivers/pci/host/pcie-iproc-bcma.c | 1 + + drivers/pci/host/pcie-iproc-msi.c | 675 +++++++++++++++++++++++++++++++++ + drivers/pci/host/pcie-iproc-platform.c | 1 + + drivers/pci/host/pcie-iproc.c | 26 ++ + drivers/pci/host/pcie-iproc.h | 23 +- + 7 files changed, 734 insertions(+), 2 deletions(-) + create mode 100644 drivers/pci/host/pcie-iproc-msi.c + +--- a/drivers/pci/host/Kconfig ++++ b/drivers/pci/host/Kconfig +@@ -115,6 +115,15 @@ config PCIE_IPROC + iProc family of SoCs. An appropriate bus interface driver also needs + to be enabled + ++config PCIE_IPROC_MSI ++ bool "Broadcom iProc PCIe MSI support" ++ depends on ARCH_BCM_IPROC && PCI_MSI ++ select PCI_MSI_IRQ_DOMAIN ++ default ARCH_BCM_IPROC ++ help ++ Say Y here if you want to enable MSI support for Broadcom's iProc ++ PCIe controller ++ + config PCIE_IPROC_PLATFORM + tristate "Broadcom iProc PCIe platform bus driver" + depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST) +--- a/drivers/pci/host/Makefile ++++ b/drivers/pci/host/Makefile +@@ -14,5 +14,6 @@ obj-$(CONFIG_PCI_XGENE) += pci-xgene.o + obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o + obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o + obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o ++obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o + obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o + obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o +--- a/drivers/pci/host/pcie-iproc-bcma.c ++++ b/drivers/pci/host/pcie-iproc-bcma.c +@@ -55,6 +55,7 @@ static int iproc_pcie_bcma_probe(struct + bcma_set_drvdata(bdev, pcie); + + pcie->base = bdev->io_addr; ++ pcie->base_addr = bdev->addr; + + res_mem.start = bdev->addr_s[0]; + res_mem.end = bdev->addr_s[0] + SZ_128M - 1; +--- /dev/null ++++ b/drivers/pci/host/pcie-iproc-msi.c +@@ -0,0 +1,675 @@ ++/* ++ * Copyright (C) 2015 Broadcom Corporation ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation version 2. ++ * ++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any ++ * kind, whether express or implied; without even the implied warranty ++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-iproc.h" ++ ++#define IPROC_MSI_INTR_EN_SHIFT 11 ++#define IPROC_MSI_INTR_EN BIT(IPROC_MSI_INTR_EN_SHIFT) ++#define IPROC_MSI_INT_N_EVENT_SHIFT 1 ++#define IPROC_MSI_INT_N_EVENT BIT(IPROC_MSI_INT_N_EVENT_SHIFT) ++#define IPROC_MSI_EQ_EN_SHIFT 0 ++#define IPROC_MSI_EQ_EN BIT(IPROC_MSI_EQ_EN_SHIFT) ++ ++#define IPROC_MSI_EQ_MASK 0x3f ++ ++/* max number of GIC interrupts */ ++#define NR_HW_IRQS 6 ++ ++/* number of entries in each event queue */ ++#define EQ_LEN 64 ++ ++/* size of each event queue memory region */ ++#define EQ_MEM_REGION_SIZE SZ_4K ++ ++/* size of each MSI address region */ ++#define MSI_MEM_REGION_SIZE SZ_4K ++ ++enum iproc_msi_reg { ++ IPROC_MSI_EQ_PAGE = 0, ++ IPROC_MSI_EQ_PAGE_UPPER, ++ IPROC_MSI_PAGE, ++ IPROC_MSI_PAGE_UPPER, ++ IPROC_MSI_CTRL, ++ IPROC_MSI_EQ_HEAD, ++ IPROC_MSI_EQ_TAIL, ++ IPROC_MSI_INTS_EN, ++ IPROC_MSI_REG_SIZE, ++}; ++ ++struct iproc_msi; ++ ++/** ++ * iProc MSI group ++ * ++ * One MSI group is allocated per GIC interrupt, serviced by one iProc MSI ++ * event queue ++ * ++ * @msi: pointer to iProc MSI data ++ * @gic_irq: GIC interrupt ++ * @eq: Event queue number ++ */ ++struct iproc_msi_grp { ++ struct iproc_msi *msi; ++ int gic_irq; ++ unsigned int eq; ++}; ++ ++/** ++ * iProc event queue based MSI ++ * ++ * Only meant to be used on platforms without MSI support integrated into the ++ * GIC ++ * ++ * @pcie: pointer to iProc PCIe data ++ * @reg_offsets: MSI register offsets ++ * @grps: MSI groups ++ * @nr_irqs: number of total interrupts connected to GIC ++ * @nr_cpus: number of toal CPUs ++ * @has_inten_reg: indicates the MSI interrupt enable register needs to be ++ * set explicitly (required for some legacy platforms) ++ * @bitmap: MSI vector bitmap ++ * @bitmap_lock: lock to protect access to the MSI bitmap ++ * @nr_msi_vecs: total number of MSI vectors ++ * @inner_domain: inner IRQ domain ++ * @msi_domain: MSI IRQ domain ++ * @nr_eq_region: required number of 4K aligned memory region for MSI event ++ * queues ++ * @nr_msi_region: required number of 4K aligned address region for MSI posted ++ * writes ++ * @eq_cpu: pointer to allocated memory region for MSI event queues ++ * @eq_dma: DMA address of MSI event queues ++ * @msi_addr: MSI address ++ */ ++struct iproc_msi { ++ struct iproc_pcie *pcie; ++ const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE]; ++ struct iproc_msi_grp *grps; ++ int nr_irqs; ++ int nr_cpus; ++ bool has_inten_reg; ++ unsigned long *bitmap; ++ struct mutex bitmap_lock; ++ unsigned int nr_msi_vecs; ++ struct irq_domain *inner_domain; ++ struct irq_domain *msi_domain; ++ unsigned int nr_eq_region; ++ unsigned int nr_msi_region; ++ void *eq_cpu; ++ dma_addr_t eq_dma; ++ phys_addr_t msi_addr; ++}; ++ ++static const u16 iproc_msi_reg_paxb[NR_HW_IRQS][IPROC_MSI_REG_SIZE] = { ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c, 0x208 }, ++}; ++ ++static const u16 iproc_msi_reg_paxc[NR_HW_IRQS][IPROC_MSI_REG_SIZE] = { ++ { 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 }, ++ { 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 }, ++ { 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 }, ++ { 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c }, ++}; ++ ++static inline u32 iproc_msi_read_reg(struct iproc_msi *msi, ++ enum iproc_msi_reg reg, ++ unsigned int eq) ++{ ++ struct iproc_pcie *pcie = msi->pcie; ++ ++ return readl_relaxed(pcie->base + msi->reg_offsets[eq][reg]); ++} ++ ++static inline void iproc_msi_write_reg(struct iproc_msi *msi, ++ enum iproc_msi_reg reg, ++ int eq, u32 val) ++{ ++ struct iproc_pcie *pcie = msi->pcie; ++ ++ writel_relaxed(val, pcie->base + msi->reg_offsets[eq][reg]); ++} ++ ++static inline u32 hwirq_to_group(struct iproc_msi *msi, unsigned long hwirq) ++{ ++ return (hwirq % msi->nr_irqs); ++} ++ ++static inline unsigned int iproc_msi_addr_offset(struct iproc_msi *msi, ++ unsigned long hwirq) ++{ ++ if (msi->nr_msi_region > 1) ++ return hwirq_to_group(msi, hwirq) * MSI_MEM_REGION_SIZE; ++ else ++ return hwirq_to_group(msi, hwirq) * sizeof(u32); ++} ++ ++static inline unsigned int iproc_msi_eq_offset(struct iproc_msi *msi, u32 eq) ++{ ++ if (msi->nr_eq_region > 1) ++ return eq * EQ_MEM_REGION_SIZE; ++ else ++ return eq * EQ_LEN * sizeof(u32); ++} ++ ++static struct irq_chip iproc_msi_irq_chip = { ++ .name = "iProc-MSI", ++}; ++ ++static struct msi_domain_info iproc_msi_domain_info = { ++ .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ++ MSI_FLAG_PCI_MSIX, ++ .chip = &iproc_msi_irq_chip, ++}; ++ ++/* ++ * In iProc PCIe core, each MSI group is serviced by a GIC interrupt and a ++ * dedicated event queue. Each MSI group can support up to 64 MSI vectors ++ * ++ * The number of MSI groups varies between different iProc SoCs. The total ++ * number of CPU cores also varies. To support MSI IRQ affinity, we ++ * distribute GIC interrupts across all available CPUs. MSI vector is moved ++ * from one GIC interrupt to another to steer to the target CPU ++ * ++ * Assuming: ++ * - the number of MSI groups is M ++ * - the number of CPU cores is N ++ * - M is always a multiple of N ++ * ++ * Total number of raw MSI vectors = M * 64 ++ * Total number of supported MSI vectors = (M * 64) / N ++ */ ++static inline int hwirq_to_cpu(struct iproc_msi *msi, unsigned long hwirq) ++{ ++ return (hwirq % msi->nr_cpus); ++} ++ ++static inline unsigned long hwirq_to_canonical_hwirq(struct iproc_msi *msi, ++ unsigned long hwirq) ++{ ++ return (hwirq - hwirq_to_cpu(msi, hwirq)); ++} ++ ++static int iproc_msi_irq_set_affinity(struct irq_data *data, ++ const struct cpumask *mask, bool force) ++{ ++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data); ++ int target_cpu = cpumask_first(mask); ++ int curr_cpu; ++ ++ curr_cpu = hwirq_to_cpu(msi, data->hwirq); ++ if (curr_cpu == target_cpu) ++ return IRQ_SET_MASK_OK_DONE; ++ ++ /* steer MSI to the target CPU */ ++ data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu; ++ ++ return IRQ_SET_MASK_OK; ++} ++ ++static void iproc_msi_irq_compose_msi_msg(struct irq_data *data, ++ struct msi_msg *msg) ++{ ++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data); ++ dma_addr_t addr; ++ ++ addr = msi->msi_addr + iproc_msi_addr_offset(msi, data->hwirq); ++ msg->address_lo = lower_32_bits(addr); ++ msg->address_hi = upper_32_bits(addr); ++ msg->data = data->hwirq; ++} ++ ++static struct irq_chip iproc_msi_bottom_irq_chip = { ++ .name = "MSI", ++ .irq_set_affinity = iproc_msi_irq_set_affinity, ++ .irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg, ++}; ++ ++static int iproc_msi_irq_domain_alloc(struct irq_domain *domain, ++ unsigned int virq, unsigned int nr_irqs, ++ void *args) ++{ ++ struct iproc_msi *msi = domain->host_data; ++ int hwirq; ++ ++ mutex_lock(&msi->bitmap_lock); ++ ++ /* allocate 'nr_cpus' number of MSI vectors each time */ ++ hwirq = bitmap_find_next_zero_area(msi->bitmap, msi->nr_msi_vecs, 0, ++ msi->nr_cpus, 0); ++ if (hwirq < msi->nr_msi_vecs) { ++ bitmap_set(msi->bitmap, hwirq, msi->nr_cpus); ++ } else { ++ mutex_unlock(&msi->bitmap_lock); ++ return -ENOSPC; ++ } ++ ++ mutex_unlock(&msi->bitmap_lock); ++ ++ irq_domain_set_info(domain, virq, hwirq, &iproc_msi_bottom_irq_chip, ++ domain->host_data, handle_simple_irq, NULL, NULL); ++ ++ return 0; ++} ++ ++static void iproc_msi_irq_domain_free(struct irq_domain *domain, ++ unsigned int virq, unsigned int nr_irqs) ++{ ++ struct irq_data *data = irq_domain_get_irq_data(domain, virq); ++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data); ++ unsigned int hwirq; ++ ++ mutex_lock(&msi->bitmap_lock); ++ ++ hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq); ++ bitmap_clear(msi->bitmap, hwirq, msi->nr_cpus); ++ ++ mutex_unlock(&msi->bitmap_lock); ++ ++ irq_domain_free_irqs_parent(domain, virq, nr_irqs); ++} ++ ++static const struct irq_domain_ops msi_domain_ops = { ++ .alloc = iproc_msi_irq_domain_alloc, ++ .free = iproc_msi_irq_domain_free, ++}; ++ ++static inline u32 decode_msi_hwirq(struct iproc_msi *msi, u32 eq, u32 head) ++{ ++ u32 *msg, hwirq; ++ unsigned int offs; ++ ++ offs = iproc_msi_eq_offset(msi, eq) + head * sizeof(u32); ++ msg = (u32 *)(msi->eq_cpu + offs); ++ hwirq = *msg & IPROC_MSI_EQ_MASK; ++ ++ /* ++ * Since we have multiple hwirq mapped to a single MSI vector, ++ * now we need to derive the hwirq at CPU0. It can then be used to ++ * mapped back to virq ++ */ ++ return hwirq_to_canonical_hwirq(msi, hwirq); ++} ++ ++static void iproc_msi_handler(struct irq_desc *desc) ++{ ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ struct iproc_msi_grp *grp; ++ struct iproc_msi *msi; ++ struct iproc_pcie *pcie; ++ u32 eq, head, tail, nr_events; ++ unsigned long hwirq; ++ int virq; ++ ++ chained_irq_enter(chip, desc); ++ ++ grp = irq_desc_get_handler_data(desc); ++ msi = grp->msi; ++ pcie = msi->pcie; ++ eq = grp->eq; ++ ++ /* ++ * iProc MSI event queue is tracked by head and tail pointers. Head ++ * pointer indicates the next entry (MSI data) to be consumed by SW in ++ * the queue and needs to be updated by SW. iProc MSI core uses the ++ * tail pointer as the next data insertion point ++ * ++ * Entries between head and tail pointers contain valid MSI data. MSI ++ * data is guaranteed to be in the event queue memory before the tail ++ * pointer is updated by the iProc MSI core ++ */ ++ head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD, ++ eq) & IPROC_MSI_EQ_MASK; ++ do { ++ tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL, ++ eq) & IPROC_MSI_EQ_MASK; ++ ++ /* ++ * Figure out total number of events (MSI data) to be ++ * processed ++ */ ++ nr_events = (tail < head) ? ++ (EQ_LEN - (head - tail)) : (tail - head); ++ if (!nr_events) ++ break; ++ ++ /* process all outstanding events */ ++ while (nr_events--) { ++ hwirq = decode_msi_hwirq(msi, eq, head); ++ virq = irq_find_mapping(msi->inner_domain, hwirq); ++ generic_handle_irq(virq); ++ ++ head++; ++ head %= EQ_LEN; ++ } ++ ++ /* ++ * Now all outstanding events have been processed. Update the ++ * head pointer ++ */ ++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head); ++ ++ /* ++ * Now go read the tail pointer again to see if there are new ++ * oustanding events that came in during the above window ++ */ ++ } while (true); ++ ++ chained_irq_exit(chip, desc); ++} ++ ++static void iproc_msi_enable(struct iproc_msi *msi) ++{ ++ int i, eq; ++ u32 val; ++ ++ /* program memory region for each event queue */ ++ for (i = 0; i < msi->nr_eq_region; i++) { ++ dma_addr_t addr = msi->eq_dma + (i * EQ_MEM_REGION_SIZE); ++ ++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i, ++ lower_32_bits(addr)); ++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i, ++ upper_32_bits(addr)); ++ } ++ ++ /* program address region for MSI posted writes */ ++ for (i = 0; i < msi->nr_msi_region; i++) { ++ phys_addr_t addr = msi->msi_addr + (i * MSI_MEM_REGION_SIZE); ++ ++ iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i, ++ lower_32_bits(addr)); ++ iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i, ++ upper_32_bits(addr)); ++ } ++ ++ for (eq = 0; eq < msi->nr_irqs; eq++) { ++ /* enable MSI event queue */ ++ val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT | ++ IPROC_MSI_EQ_EN; ++ iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val); ++ ++ /* ++ * Some legacy platforms require the MSI interrupt enable ++ * register to be set explicitly ++ */ ++ if (msi->has_inten_reg) { ++ val = iproc_msi_read_reg(msi, IPROC_MSI_INTS_EN, eq); ++ val |= BIT(eq); ++ iproc_msi_write_reg(msi, IPROC_MSI_INTS_EN, eq, val); ++ } ++ } ++} ++ ++static void iproc_msi_disable(struct iproc_msi *msi) ++{ ++ u32 eq, val; ++ ++ for (eq = 0; eq < msi->nr_irqs; eq++) { ++ if (msi->has_inten_reg) { ++ val = iproc_msi_read_reg(msi, IPROC_MSI_INTS_EN, eq); ++ val &= ~BIT(eq); ++ iproc_msi_write_reg(msi, IPROC_MSI_INTS_EN, eq, val); ++ } ++ ++ val = iproc_msi_read_reg(msi, IPROC_MSI_CTRL, eq); ++ val &= ~(IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT | ++ IPROC_MSI_EQ_EN); ++ iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val); ++ } ++} ++ ++static int iproc_msi_alloc_domains(struct device_node *node, ++ struct iproc_msi *msi) ++{ ++ msi->inner_domain = irq_domain_add_linear(NULL, msi->nr_msi_vecs, ++ &msi_domain_ops, msi); ++ if (!msi->inner_domain) ++ return -ENOMEM; ++ ++ msi->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(node), ++ &iproc_msi_domain_info, ++ msi->inner_domain); ++ if (!msi->msi_domain) { ++ irq_domain_remove(msi->inner_domain); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++static void iproc_msi_free_domains(struct iproc_msi *msi) ++{ ++ if (msi->msi_domain) ++ irq_domain_remove(msi->msi_domain); ++ ++ if (msi->inner_domain) ++ irq_domain_remove(msi->inner_domain); ++} ++ ++static void iproc_msi_irq_free(struct iproc_msi *msi, unsigned int cpu) ++{ ++ int i; ++ ++ for (i = cpu; i < msi->nr_irqs; i += msi->nr_cpus) { ++ irq_set_chained_handler_and_data(msi->grps[i].gic_irq, ++ NULL, NULL); ++ } ++} ++ ++static int iproc_msi_irq_setup(struct iproc_msi *msi, unsigned int cpu) ++{ ++ int i, ret; ++ cpumask_var_t mask; ++ struct iproc_pcie *pcie = msi->pcie; ++ ++ for (i = cpu; i < msi->nr_irqs; i += msi->nr_cpus) { ++ irq_set_chained_handler_and_data(msi->grps[i].gic_irq, ++ iproc_msi_handler, ++ &msi->grps[i]); ++ /* dedicate GIC interrupt to each CPU core */ ++ if (alloc_cpumask_var(&mask, GFP_KERNEL)) { ++ cpumask_clear(mask); ++ cpumask_set_cpu(cpu, mask); ++ ret = irq_set_affinity(msi->grps[i].gic_irq, mask); ++ if (ret) ++ dev_err(pcie->dev, ++ "failed to set affinity for IRQ%d\n", ++ msi->grps[i].gic_irq); ++ free_cpumask_var(mask); ++ } else { ++ dev_err(pcie->dev, "failed to alloc CPU mask\n"); ++ ret = -EINVAL; ++ } ++ ++ if (ret) { ++ /* free all configured/unconfigured irqs */ ++ iproc_msi_irq_free(msi, cpu); ++ return ret; ++ } ++ } ++ ++ return 0; ++} ++ ++int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node) ++{ ++ struct iproc_msi *msi; ++ int i, ret; ++ unsigned int cpu; ++ ++ if (!of_device_is_compatible(node, "brcm,iproc-msi")) ++ return -ENODEV; ++ ++ if (!of_find_property(node, "msi-controller", NULL)) ++ return -ENODEV; ++ ++ if (pcie->msi) ++ return -EBUSY; ++ ++ msi = devm_kzalloc(pcie->dev, sizeof(*msi), GFP_KERNEL); ++ if (!msi) ++ return -ENOMEM; ++ ++ msi->pcie = pcie; ++ pcie->msi = msi; ++ msi->msi_addr = pcie->base_addr; ++ mutex_init(&msi->bitmap_lock); ++ msi->nr_cpus = num_possible_cpus(); ++ ++ msi->nr_irqs = of_irq_count(node); ++ if (!msi->nr_irqs) { ++ dev_err(pcie->dev, "found no MSI GIC interrupt\n"); ++ return -ENODEV; ++ } ++ ++ if (msi->nr_irqs > NR_HW_IRQS) { ++ dev_warn(pcie->dev, "too many MSI GIC interrupts defined %d\n", ++ msi->nr_irqs); ++ msi->nr_irqs = NR_HW_IRQS; ++ } ++ ++ if (msi->nr_irqs < msi->nr_cpus) { ++ dev_err(pcie->dev, ++ "not enough GIC interrupts for MSI affinity\n"); ++ return -EINVAL; ++ } ++ ++ if (msi->nr_irqs % msi->nr_cpus != 0) { ++ msi->nr_irqs -= msi->nr_irqs % msi->nr_cpus; ++ dev_warn(pcie->dev, "Reducing number of interrupts to %d\n", ++ msi->nr_irqs); ++ } ++ ++ switch (pcie->type) { ++ case IPROC_PCIE_PAXB: ++ msi->reg_offsets = iproc_msi_reg_paxb; ++ msi->nr_eq_region = 1; ++ msi->nr_msi_region = 1; ++ break; ++ case IPROC_PCIE_PAXC: ++ msi->reg_offsets = iproc_msi_reg_paxc; ++ msi->nr_eq_region = msi->nr_irqs; ++ msi->nr_msi_region = msi->nr_irqs; ++ break; ++ default: ++ dev_err(pcie->dev, "incompatible iProc PCIe interface\n"); ++ return -EINVAL; ++ } ++ ++ if (of_find_property(node, "brcm,pcie-msi-inten", NULL)) ++ msi->has_inten_reg = true; ++ ++ msi->nr_msi_vecs = msi->nr_irqs * EQ_LEN; ++ msi->bitmap = devm_kcalloc(pcie->dev, BITS_TO_LONGS(msi->nr_msi_vecs), ++ sizeof(*msi->bitmap), GFP_KERNEL); ++ if (!msi->bitmap) ++ return -ENOMEM; ++ ++ msi->grps = devm_kcalloc(pcie->dev, msi->nr_irqs, sizeof(*msi->grps), ++ GFP_KERNEL); ++ if (!msi->grps) ++ return -ENOMEM; ++ ++ for (i = 0; i < msi->nr_irqs; i++) { ++ unsigned int irq = irq_of_parse_and_map(node, i); ++ ++ if (!irq) { ++ dev_err(pcie->dev, "unable to parse/map interrupt\n"); ++ ret = -ENODEV; ++ goto free_irqs; ++ } ++ msi->grps[i].gic_irq = irq; ++ msi->grps[i].msi = msi; ++ msi->grps[i].eq = i; ++ } ++ ++ /* reserve memory for event queue and make sure memories are zeroed */ ++ msi->eq_cpu = dma_zalloc_coherent(pcie->dev, ++ msi->nr_eq_region * EQ_MEM_REGION_SIZE, ++ &msi->eq_dma, GFP_KERNEL); ++ if (!msi->eq_cpu) { ++ ret = -ENOMEM; ++ goto free_irqs; ++ } ++ ++ ret = iproc_msi_alloc_domains(node, msi); ++ if (ret) { ++ dev_err(pcie->dev, "failed to create MSI domains\n"); ++ goto free_eq_dma; ++ } ++ ++ for_each_online_cpu(cpu) { ++ ret = iproc_msi_irq_setup(msi, cpu); ++ if (ret) ++ goto free_msi_irq; ++ } ++ ++ iproc_msi_enable(msi); ++ ++ return 0; ++ ++free_msi_irq: ++ for_each_online_cpu(cpu) ++ iproc_msi_irq_free(msi, cpu); ++ iproc_msi_free_domains(msi); ++ ++free_eq_dma: ++ dma_free_coherent(pcie->dev, msi->nr_eq_region * EQ_MEM_REGION_SIZE, ++ msi->eq_cpu, msi->eq_dma); ++ ++free_irqs: ++ for (i = 0; i < msi->nr_irqs; i++) { ++ if (msi->grps[i].gic_irq) ++ irq_dispose_mapping(msi->grps[i].gic_irq); ++ } ++ pcie->msi = NULL; ++ return ret; ++} ++EXPORT_SYMBOL(iproc_msi_init); ++ ++void iproc_msi_exit(struct iproc_pcie *pcie) ++{ ++ struct iproc_msi *msi = pcie->msi; ++ unsigned int i, cpu; ++ ++ if (!msi) ++ return; ++ ++ iproc_msi_disable(msi); ++ ++ for_each_online_cpu(cpu) ++ iproc_msi_irq_free(msi, cpu); ++ ++ iproc_msi_free_domains(msi); ++ ++ dma_free_coherent(pcie->dev, msi->nr_eq_region * EQ_MEM_REGION_SIZE, ++ msi->eq_cpu, msi->eq_dma); ++ ++ for (i = 0; i < msi->nr_irqs; i++) { ++ if (msi->grps[i].gic_irq) ++ irq_dispose_mapping(msi->grps[i].gic_irq); ++ } ++} ++EXPORT_SYMBOL(iproc_msi_exit); +--- a/drivers/pci/host/pcie-iproc-platform.c ++++ b/drivers/pci/host/pcie-iproc-platform.c +@@ -71,6 +71,7 @@ static int iproc_pcie_pltfm_probe(struct + dev_err(pcie->dev, "unable to map controller registers\n"); + return -ENOMEM; + } ++ pcie->base_addr = reg.start; + + if (of_property_read_bool(np, "brcm,pcie-ob")) { + u32 val; +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -440,6 +440,26 @@ static int iproc_pcie_map_ranges(struct + return 0; + } + ++static int iproc_pcie_msi_enable(struct iproc_pcie *pcie) ++{ ++ struct device_node *msi_node; ++ ++ msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0); ++ if (!msi_node) ++ return -ENODEV; ++ ++ /* ++ * If another MSI controller is being used, the call below should fail ++ * but that is okay ++ */ ++ return iproc_msi_init(pcie, msi_node); ++} ++ ++static void iproc_pcie_msi_disable(struct iproc_pcie *pcie) ++{ ++ iproc_msi_exit(pcie); ++} ++ + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res) + { + int ret; +@@ -506,6 +526,10 @@ int iproc_pcie_setup(struct iproc_pcie * + + iproc_pcie_enable(pcie); + ++ if (IS_ENABLED(CONFIG_PCI_MSI)) ++ if (iproc_pcie_msi_enable(pcie)) ++ dev_info(pcie->dev, "not using iProc MSI\n"); ++ + pci_scan_child_bus(bus); + pci_assign_unassigned_bus_resources(bus); + pci_fixup_irqs(pci_common_swizzle, pcie->map_irq); +@@ -530,6 +554,8 @@ int iproc_pcie_remove(struct iproc_pcie + pci_stop_root_bus(pcie->root_bus); + pci_remove_root_bus(pcie->root_bus); + ++ iproc_pcie_msi_disable(pcie); ++ + phy_power_off(pcie->phy); + phy_exit(pcie->phy); + +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -41,6 +41,8 @@ struct iproc_pcie_ob { + resource_size_t window_size; + }; + ++struct iproc_msi; ++ + /** + * iProc PCIe device + * +@@ -48,19 +50,21 @@ struct iproc_pcie_ob { + * @type: iProc PCIe interface type + * @reg_offsets: register offsets + * @base: PCIe host controller I/O register base ++ * @base_addr: PCIe host controller register base physical address + * @sysdata: Per PCI controller data (ARM-specific) + * @root_bus: pointer to root bus + * @phy: optional PHY device that controls the Serdes +- * @irqs: interrupt IDs + * @map_irq: function callback to map interrupts +- * @need_ob_cfg: indidates SW needs to configure the outbound mapping window ++ * @need_ob_cfg: indicates SW needs to configure the outbound mapping window + * @ob: outbound mapping parameters ++ * @msi: MSI data + */ + struct iproc_pcie { + struct device *dev; + enum iproc_pcie_type type; + const u16 *reg_offsets; + void __iomem *base; ++ phys_addr_t base_addr; + #ifdef CONFIG_ARM + struct pci_sys_data sysdata; + #endif +@@ -69,9 +73,24 @@ struct iproc_pcie { + int (*map_irq)(const struct pci_dev *, u8, u8); + bool need_ob_cfg; + struct iproc_pcie_ob ob; ++ struct iproc_msi *msi; + }; + + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res); + int iproc_pcie_remove(struct iproc_pcie *pcie); + ++#ifdef CONFIG_PCI_MSI ++int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node); ++void iproc_msi_exit(struct iproc_pcie *pcie); ++#else ++static inline int iproc_msi_init(struct iproc_pcie *pcie, ++ struct device_node *node) ++{ ++ return -ENODEV; ++} ++static void iproc_msi_exit(struct iproc_pcie *pcie) ++{ ++} ++#endif ++ + #endif /* _PCIE_IPROC_H */ diff --git a/target/linux/bcm53xx/patches-4.3/140-PCI-iproc-Fix-code-comment-to-match-code.patch b/target/linux/bcm53xx/patches-4.3/140-PCI-iproc-Fix-code-comment-to-match-code.patch new file mode 100644 index 0000000000..c018105159 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/140-PCI-iproc-Fix-code-comment-to-match-code.patch @@ -0,0 +1,28 @@ +From 5d92f41c48c5e3c6fa5be87e3d6fca57e2fbb127 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:15 -0700 +Subject: [PATCH 140/147] PCI: iproc: Fix code comment to match code + +Fix code comment in pcie-iproc.h so it matches the code. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +--- + drivers/pci/host/pcie-iproc.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -20,11 +20,11 @@ + * iProc PCIe device + * @dev: pointer to device data structure + * @base: PCIe host controller I/O register base +- * @resources: linked list of all PCI resources + * @sysdata: Per PCI controller data (ARM-specific) + * @root_bus: pointer to root bus + * @phy: optional PHY device that controls the Serdes + * @irqs: interrupt IDs ++ * @map_irq: function callback to map interrupts + */ + struct iproc_pcie { + struct device *dev; diff --git a/target/linux/bcm53xx/patches-4.3/141-PCI-iproc-Remove-unused-struct-iproc_pcie.irqs.patch b/target/linux/bcm53xx/patches-4.3/141-PCI-iproc-Remove-unused-struct-iproc_pcie.irqs.patch new file mode 100644 index 0000000000..e16822fae7 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/141-PCI-iproc-Remove-unused-struct-iproc_pcie.irqs.patch @@ -0,0 +1,33 @@ +From 98aac697a83db6e1d004e5d61cf6c976a0b1c35a Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:16 -0700 +Subject: [PATCH 141/147] PCI: iproc: Remove unused struct iproc_pcie.irqs[] + +Remove unused struct iproc_pcie member irqs[] and unused #define +IPROC_PCIE_MAX_NUM_IRQS. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +--- + drivers/pci/host/pcie-iproc.h | 3 --- + 1 file changed, 3 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -14,8 +14,6 @@ + #ifndef _PCIE_IPROC_H + #define _PCIE_IPROC_H + +-#define IPROC_PCIE_MAX_NUM_IRQS 6 +- + /** + * iProc PCIe device + * @dev: pointer to device data structure +@@ -34,7 +32,6 @@ struct iproc_pcie { + #endif + struct pci_bus *root_bus; + struct phy *phy; +- int irqs[IPROC_PCIE_MAX_NUM_IRQS]; + int (*map_irq)(const struct pci_dev *, u8, u8); + }; + diff --git a/target/linux/bcm53xx/patches-4.3/142-PCI-iproc-Call-pci_fixup_irqs-for-ARM64-as-well-as-A.patch b/target/linux/bcm53xx/patches-4.3/142-PCI-iproc-Call-pci_fixup_irqs-for-ARM64-as-well-as-A.patch new file mode 100644 index 0000000000..2e58d060ca --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/142-PCI-iproc-Call-pci_fixup_irqs-for-ARM64-as-well-as-A.patch @@ -0,0 +1,31 @@ +From bdb8a1844f3113ec08915d1e8e3fd5686fb2fb78 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:17 -0700 +Subject: [PATCH 142/147] PCI: iproc: Call pci_fixup_irqs() for ARM64 as well + as ARM + +After 459a07721c11 ("PCI: Build setup-irq.o for arm64"), we build +setup-irq.o for arm64, so we can use pci_fixup_irqs() on both arm and +arm64. + +Remove the "#ifdef CONFIG_ARM" around the call to pci_fixup_irqs(). + +[bhelgaas: changelog] +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +--- + drivers/pci/host/pcie-iproc.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -238,9 +238,7 @@ int iproc_pcie_setup(struct iproc_pcie * + + pci_scan_child_bus(bus); + pci_assign_unassigned_bus_resources(bus); +-#ifdef CONFIG_ARM + pci_fixup_irqs(pci_common_swizzle, pcie->map_irq); +-#endif + pci_bus_add_devices(bus); + + return 0; diff --git a/target/linux/bcm53xx/patches-4.3/143-PCI-iproc-Fix-PCIe-reset-logic.patch b/target/linux/bcm53xx/patches-4.3/143-PCI-iproc-Fix-PCIe-reset-logic.patch new file mode 100644 index 0000000000..b9020a5ac8 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/143-PCI-iproc-Fix-PCIe-reset-logic.patch @@ -0,0 +1,62 @@ +From 199ff14100095d52cd1b232cc0f3b12f348b5b07 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:18 -0700 +Subject: [PATCH 143/147] PCI: iproc: Fix PCIe reset logic + +The current reset logic does not always properly reset the device. For +example, in the case when the perst_b signal is already de-asserted in the +bootloader, the current reset logic fails to trigger a proper assert -> +de-assert reset sequence. + +Fix the issue by always triggering the proper reset sequence. + +Also explicitly select the desired reset source, i.e., perst_b, and reduce +the wait time after the device comes out of reset from 250 ms to 100 ms, +based on recommendation from the ASIC team. + +Tested-by: Vladimir Dreizin +Tested-by: Darren Edamura +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +Reviewed-by: Vladimir Dreizin +Reviewed-by: Trac Hoang +Reviewed-by: Scott Branden +--- + drivers/pci/host/pcie-iproc.c | 15 ++++++++++----- + 1 file changed, 10 insertions(+), 5 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -31,6 +31,8 @@ + #include "pcie-iproc.h" + + #define CLK_CONTROL_OFFSET 0x000 ++#define EP_PERST_SOURCE_SELECT_SHIFT 2 ++#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) + #define EP_MODE_SURVIVE_PERST_SHIFT 1 + #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) + #define RC_PCIE_RST_OUTPUT_SHIFT 0 +@@ -119,15 +121,18 @@ static void iproc_pcie_reset(struct ipro + u32 val; + + /* +- * Configure the PCIe controller as root complex and send a downstream +- * reset ++ * Select perst_b signal as reset source. Put the device into reset, ++ * and then bring it out of reset + */ +- val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT; ++ val = readl(pcie->base + CLK_CONTROL_OFFSET); ++ val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & ++ ~RC_PCIE_RST_OUTPUT; + writel(val, pcie->base + CLK_CONTROL_OFFSET); + udelay(250); +- val &= ~EP_MODE_SURVIVE_PERST; ++ ++ val |= RC_PCIE_RST_OUTPUT; + writel(val, pcie->base + CLK_CONTROL_OFFSET); +- msleep(250); ++ msleep(100); + } + + static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus) diff --git a/target/linux/bcm53xx/patches-4.3/144-PCI-iproc-Improve-link-detection-logic.patch b/target/linux/bcm53xx/patches-4.3/144-PCI-iproc-Improve-link-detection-logic.patch new file mode 100644 index 0000000000..3fecba2b26 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/144-PCI-iproc-Improve-link-detection-logic.patch @@ -0,0 +1,84 @@ +From aaf22ab4e916afa68a2e1aed4e913b76cbd58276 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:19 -0700 +Subject: [PATCH 144/147] PCI: iproc: Improve link detection logic + +Improve the link detection logic by explicitly querying the link status +register to ensure link is active. + +Also force class to PCI_CLASS_BRIDGE_PCI (0x0604) through the host +configuration space register. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +Reviewed-by: Anup Patel +Reviewed-by: Scott Branden +--- + drivers/pci/host/pcie-iproc.c | 29 +++++++++++++++++++++++------ + 1 file changed, 23 insertions(+), 6 deletions(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -60,6 +60,12 @@ + #define SYS_RC_INTX_EN 0x330 + #define SYS_RC_INTX_MASK 0xf + ++#define PCIE_LINK_STATUS_OFFSET 0xf0c ++#define PCIE_PHYLINKUP_SHIFT 3 ++#define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT) ++#define PCIE_DL_ACTIVE_SHIFT 2 ++#define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT) ++ + static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) + { + struct iproc_pcie *pcie; +@@ -138,9 +144,15 @@ static void iproc_pcie_reset(struct ipro + static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus) + { + u8 hdr_type; +- u32 link_ctrl; ++ u32 link_ctrl, class, val; + u16 pos, link_status; +- int link_is_active = 0; ++ bool link_is_active = false; ++ ++ val = readl(pcie->base + PCIE_LINK_STATUS_OFFSET); ++ if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) { ++ dev_err(pcie->dev, "PHY or data link is INACTIVE!\n"); ++ return -ENODEV; ++ } + + /* make sure we are not in EP mode */ + pci_bus_read_config_byte(bus, 0, PCI_HEADER_TYPE, &hdr_type); +@@ -150,14 +162,19 @@ static int iproc_pcie_check_link(struct + } + + /* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */ +- pci_bus_write_config_word(bus, 0, PCI_CLASS_DEVICE, +- PCI_CLASS_BRIDGE_PCI); ++#define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c ++#define PCI_CLASS_BRIDGE_MASK 0xffff00 ++#define PCI_CLASS_BRIDGE_SHIFT 8 ++ pci_bus_read_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, &class); ++ class &= ~PCI_CLASS_BRIDGE_MASK; ++ class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT); ++ pci_bus_write_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, class); + + /* check link status to see if link is active */ + pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP); + pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, &link_status); + if (link_status & PCI_EXP_LNKSTA_NLW) +- link_is_active = 1; ++ link_is_active = true; + + if (!link_is_active) { + /* try GEN 1 link speed */ +@@ -181,7 +198,7 @@ static int iproc_pcie_check_link(struct + pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, + &link_status); + if (link_status & PCI_EXP_LNKSTA_NLW) +- link_is_active = 1; ++ link_is_active = true; + } + } + diff --git a/target/linux/bcm53xx/patches-4.3/145-PCI-iproc-Update-PCIe-device-tree-bindings.patch b/target/linux/bcm53xx/patches-4.3/145-PCI-iproc-Update-PCIe-device-tree-bindings.patch new file mode 100644 index 0000000000..eb5bb64bba --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/145-PCI-iproc-Update-PCIe-device-tree-bindings.patch @@ -0,0 +1,50 @@ +From 8d0afa1a93be2da954c85392bbc7b2264c9d241c Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 15 Sep 2015 17:39:20 -0700 +Subject: [PATCH 145/147] PCI: iproc: Update PCIe device tree bindings + +Update the device tree bindings with added support for outbound mapping +configurations. + +Signed-off-by: Ray Jui +Signed-off-by: Bjorn Helgaas +--- + .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt ++++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +@@ -17,6 +17,21 @@ Optional properties: + - phys: phandle of the PCIe PHY device + - phy-names: must be "pcie-phy" + ++- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done ++by the ASIC after power on reset. In this case, SW needs to configure it ++ ++If the brcm,pcie-ob property is present, the following properties become ++effective: ++ ++Required: ++- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal ++address used by the iProc PCIe core (not the PCIe address) ++- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) ++ ++Optional: ++- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to ++increase the outbound window size ++ + Example: + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; +@@ -38,6 +53,11 @@ Example: + + phys = <&phy 0 5>; + phy-names = "pcie-phy"; ++ ++ brcm,pcie-ob; ++ brcm,pcie-ob-oarr-size; ++ brcm,pcie-ob-axi-offset = <0x00000000>; ++ brcm,pcie-ob-window-size = <256>; + }; + + pcie1: pcie@18013000 { diff --git a/target/linux/bcm53xx/patches-4.3/146-PCI-iproc-Add-outbound-mapping-support.patch b/target/linux/bcm53xx/patches-4.3/146-PCI-iproc-Add-outbound-mapping-support.patch new file mode 100644 index 0000000000..b65d3057bc --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/146-PCI-iproc-Add-outbound-mapping-support.patch @@ -0,0 +1,236 @@ +From e99a187b5c5f60fe55ca586f82ac1a3557fb166a Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Fri, 16 Oct 2015 08:18:24 -0500 +Subject: [PATCH 146/147] PCI: iproc: Add outbound mapping support + +Certain SoCs require the PCIe outbound mapping to be configured in +software. Add support for those chips. + +[jonmason: Use %pap format when printing size_t to avoid warnings in 32-bit +build.] +[arnd: Use div64_u64() instead of "%" to avoid __aeabi_uldivmod link error +in 32-bit build.] +Signed-off-by: Ray Jui +Signed-off-by: Jon Mason +Signed-off-by: Arnd Bergmann +Signed-off-by: Bjorn Helgaas +--- + drivers/pci/host/pcie-iproc-platform.c | 27 ++++++++ + drivers/pci/host/pcie-iproc.c | 115 +++++++++++++++++++++++++++++++++ + drivers/pci/host/pcie-iproc.h | 17 +++++ + 3 files changed, 159 insertions(+) + +--- a/drivers/pci/host/pcie-iproc-platform.c ++++ b/drivers/pci/host/pcie-iproc-platform.c +@@ -54,6 +54,33 @@ static int iproc_pcie_pltfm_probe(struct + return -ENOMEM; + } + ++ if (of_property_read_bool(np, "brcm,pcie-ob")) { ++ u32 val; ++ ++ ret = of_property_read_u32(np, "brcm,pcie-ob-axi-offset", ++ &val); ++ if (ret) { ++ dev_err(pcie->dev, ++ "missing brcm,pcie-ob-axi-offset property\n"); ++ return ret; ++ } ++ pcie->ob.axi_offset = val; ++ ++ ret = of_property_read_u32(np, "brcm,pcie-ob-window-size", ++ &val); ++ if (ret) { ++ dev_err(pcie->dev, ++ "missing brcm,pcie-ob-window-size property\n"); ++ return ret; ++ } ++ pcie->ob.window_size = (resource_size_t)val * SZ_1M; ++ ++ if (of_property_read_bool(np, "brcm,pcie-ob-oarr-size")) ++ pcie->ob.set_oarr_size = true; ++ ++ pcie->need_ob_cfg = true; ++ } ++ + /* PHY use is optional */ + pcie->phy = devm_phy_get(&pdev->dev, "pcie-phy"); + if (IS_ERR(pcie->phy)) { +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -66,6 +66,18 @@ + #define PCIE_DL_ACTIVE_SHIFT 2 + #define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT) + ++#define OARR_VALID_SHIFT 0 ++#define OARR_VALID BIT(OARR_VALID_SHIFT) ++#define OARR_SIZE_CFG_SHIFT 1 ++#define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT) ++ ++#define OARR_LO(window) (0xd20 + (window) * 8) ++#define OARR_HI(window) (0xd24 + (window) * 8) ++#define OMAP_LO(window) (0xd40 + (window) * 8) ++#define OMAP_HI(window) (0xd44 + (window) * 8) ++ ++#define MAX_NUM_OB_WINDOWS 2 ++ + static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) + { + struct iproc_pcie *pcie; +@@ -212,6 +224,101 @@ static void iproc_pcie_enable(struct ipr + writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN); + } + ++/** ++ * Some iProc SoCs require the SW to configure the outbound address mapping ++ * ++ * Outbound address translation: ++ * ++ * iproc_pcie_address = axi_address - axi_offset ++ * OARR = iproc_pcie_address ++ * OMAP = pci_addr ++ * ++ * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address ++ */ ++static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr, ++ u64 pci_addr, resource_size_t size) ++{ ++ struct iproc_pcie_ob *ob = &pcie->ob; ++ unsigned i; ++ u64 max_size = (u64)ob->window_size * MAX_NUM_OB_WINDOWS; ++ u64 remainder; ++ ++ if (size > max_size) { ++ dev_err(pcie->dev, ++ "res size 0x%pap exceeds max supported size 0x%llx\n", ++ &size, max_size); ++ return -EINVAL; ++ } ++ ++ div64_u64_rem(size, ob->window_size, &remainder); ++ if (remainder) { ++ dev_err(pcie->dev, ++ "res size %pap needs to be multiple of window size %pap\n", ++ &size, &ob->window_size); ++ return -EINVAL; ++ } ++ ++ if (axi_addr < ob->axi_offset) { ++ dev_err(pcie->dev, ++ "axi address %pap less than offset %pap\n", ++ &axi_addr, &ob->axi_offset); ++ return -EINVAL; ++ } ++ ++ /* ++ * Translate the AXI address to the internal address used by the iProc ++ * PCIe core before programming the OARR ++ */ ++ axi_addr -= ob->axi_offset; ++ ++ for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) { ++ writel(lower_32_bits(axi_addr) | OARR_VALID | ++ (ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i)); ++ writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i)); ++ writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i)); ++ writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i)); ++ ++ size -= ob->window_size; ++ if (size == 0) ++ break; ++ ++ axi_addr += ob->window_size; ++ pci_addr += ob->window_size; ++ } ++ ++ return 0; ++} ++ ++static int iproc_pcie_map_ranges(struct iproc_pcie *pcie, ++ struct list_head *resources) ++{ ++ struct resource_entry *window; ++ int ret; ++ ++ resource_list_for_each_entry(window, resources) { ++ struct resource *res = window->res; ++ u64 res_type = resource_type(res); ++ ++ switch (res_type) { ++ case IORESOURCE_IO: ++ case IORESOURCE_BUS: ++ break; ++ case IORESOURCE_MEM: ++ ret = iproc_pcie_setup_ob(pcie, res->start, ++ res->start - window->offset, ++ resource_size(res)); ++ if (ret) ++ return ret; ++ break; ++ default: ++ dev_err(pcie->dev, "invalid resource %pR\n", res); ++ return -EINVAL; ++ } ++ } ++ ++ return 0; ++} ++ + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res) + { + int ret; +@@ -235,6 +342,14 @@ int iproc_pcie_setup(struct iproc_pcie * + + iproc_pcie_reset(pcie); + ++ if (pcie->need_ob_cfg) { ++ ret = iproc_pcie_map_ranges(pcie, res); ++ if (ret) { ++ dev_err(pcie->dev, "map failed\n"); ++ goto err_power_off_phy; ++ } ++ } ++ + #ifdef CONFIG_ARM + pcie->sysdata.private_data = pcie; + sysdata = &pcie->sysdata; +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -15,6 +15,19 @@ + #define _PCIE_IPROC_H + + /** ++ * iProc PCIe outbound mapping ++ * @set_oarr_size: indicates the OARR size bit needs to be set ++ * @axi_offset: offset from the AXI address to the internal address used by ++ * the iProc PCIe core ++ * @window_size: outbound window size ++ */ ++struct iproc_pcie_ob { ++ bool set_oarr_size; ++ resource_size_t axi_offset; ++ resource_size_t window_size; ++}; ++ ++/** + * iProc PCIe device + * @dev: pointer to device data structure + * @base: PCIe host controller I/O register base +@@ -23,6 +36,8 @@ + * @phy: optional PHY device that controls the Serdes + * @irqs: interrupt IDs + * @map_irq: function callback to map interrupts ++ * @need_ob_cfg: indidates SW needs to configure the outbound mapping window ++ * @ob: outbound mapping parameters + */ + struct iproc_pcie { + struct device *dev; +@@ -33,6 +48,8 @@ struct iproc_pcie { + struct pci_bus *root_bus; + struct phy *phy; + int (*map_irq)(const struct pci_dev *, u8, u8); ++ bool need_ob_cfg; ++ struct iproc_pcie_ob ob; + }; + + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res); diff --git a/target/linux/bcm53xx/patches-4.3/147-PCI-iproc-Fix-header-comment-Corporation-misspelling.patch b/target/linux/bcm53xx/patches-4.3/147-PCI-iproc-Fix-header-comment-Corporation-misspelling.patch new file mode 100644 index 0000000000..9ad5f00c04 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/147-PCI-iproc-Fix-header-comment-Corporation-misspelling.patch @@ -0,0 +1,25 @@ +From be908d21b2e9c2cab1ef568dfca4f9777611b3dd Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Fri, 16 Oct 2015 12:04:04 -0700 +Subject: [PATCH 147/147] PCI: iproc: Fix header comment "Corporation" + misspelling + +Fix an obvious "Broadcom Corporation" typo in a header comment. + +Signed-off-by: Florian Fainelli +Signed-off-by: Bjorn Helgaas +Acked-by: Ray Jui +--- + drivers/pci/host/pcie-iproc.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -1,6 +1,6 @@ + /* + * Copyright (C) 2014 Hauke Mehrtens +- * Copyright (C) 2015 Broadcom Corporatcommon ion ++ * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as diff --git a/target/linux/bcm53xx/patches-4.3/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch b/target/linux/bcm53xx/patches-4.3/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch new file mode 100644 index 0000000000..7d6949f234 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch @@ -0,0 +1,29 @@ +From d85a955118c8d8679d4f746fe2189c172d7c365f Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Mon, 16 Nov 2015 17:18:05 -0800 +Subject: [PATCH 150/154] PCI: iproc: Update iProc PCIe device tree binding + +Add a new compatible string "brcm,iproc-pcie-paxc", for PAXC based iProc +PCIe root complex. A PAXC based PCIe root complex is connected to +emulated endpoint devices internal to the ASIC + +Signed-off-by: Ray Jui +Reviewed-by: Scott Branden +--- + Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt ++++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +@@ -1,7 +1,10 @@ + * Broadcom iProc PCIe controller with the platform bus interface + + Required properties: +-- compatible: Must be "brcm,iproc-pcie" ++- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc" ++ for PAXC. PAXB based root complex is used for external endpoint devices. ++ PAXC based root complex is connected to emulated endpoint devices ++ internal to the ASIC + - reg: base address and length of the PCIe controller I/O register space + - #interrupt-cells: set to <1> + - interrupt-map-mask and interrupt-map, standard PCI properties to define the diff --git a/target/linux/bcm53xx/patches-4.3/151-PCI-iproc-Add-PAXC-interface-support.patch b/target/linux/bcm53xx/patches-4.3/151-PCI-iproc-Add-PAXC-interface-support.patch new file mode 100644 index 0000000000..9b7b762241 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/151-PCI-iproc-Add-PAXC-interface-support.patch @@ -0,0 +1,428 @@ +From a13fc4733b25d6dad6ec1826f09225c69ee21e3a Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Mon, 16 Nov 2015 17:41:43 -0800 +Subject: [PATCH 151/154] PCI: iproc: Add PAXC interface support + +Traditionally, all iProc PCIe root complexes use PAXB based wrapper, +with an integrated on-chip Serdes to support external endpoint devices. +On newer iProc platforms, a PAXC based wrapper is introduced, for +connection with internally emulated PCIe endpoint devices in the ASIC + +This patch adds support for PAXC based iProc PCIe root complex in the +iProc PCIe core driver. This change fators out common logic between +PAXB and PAXC, and use tables to store register offsets that are +different between PAXB and PAXC. This allows the driver to be scaled to +support subsequent PAXC revisions in the future + +Signed-off-by: Ray Jui +Reviewed-by: Scott Branden +--- + drivers/pci/host/pcie-iproc-platform.c | 24 +++- + drivers/pci/host/pcie-iproc.c | 202 +++++++++++++++++++++++++++------ + drivers/pci/host/pcie-iproc.h | 19 ++++ + 3 files changed, 205 insertions(+), 40 deletions(-) + +--- a/drivers/pci/host/pcie-iproc-platform.c ++++ b/drivers/pci/host/pcie-iproc-platform.c +@@ -26,8 +26,21 @@ + + #include "pcie-iproc.h" + ++static const struct of_device_id iproc_pcie_of_match_table[] = { ++ { ++ .compatible = "brcm,iproc-pcie", ++ .data = (int *)IPROC_PCIE_PAXB, ++ }, { ++ .compatible = "brcm,iproc-pcie-paxc", ++ .data = (int *)IPROC_PCIE_PAXC, ++ }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table); ++ + static int iproc_pcie_pltfm_probe(struct platform_device *pdev) + { ++ const struct of_device_id *of_id; + struct iproc_pcie *pcie; + struct device_node *np = pdev->dev.of_node; + struct resource reg; +@@ -35,11 +48,16 @@ static int iproc_pcie_pltfm_probe(struct + LIST_HEAD(res); + int ret; + ++ of_id = of_match_device(iproc_pcie_of_match_table, &pdev->dev); ++ if (!of_id) ++ return -EINVAL; ++ + pcie = devm_kzalloc(&pdev->dev, sizeof(struct iproc_pcie), GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pcie->dev = &pdev->dev; ++ pcie->type = (enum iproc_pcie_type)of_id->data; + platform_set_drvdata(pdev, pcie); + + ret = of_address_to_resource(np, 0, ®); +@@ -114,12 +132,6 @@ static int iproc_pcie_pltfm_remove(struc + return iproc_pcie_remove(pcie); + } + +-static const struct of_device_id iproc_pcie_of_match_table[] = { +- { .compatible = "brcm,iproc-pcie", }, +- { /* sentinel */ } +-}; +-MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table); +- + static struct platform_driver iproc_pcie_pltfm_driver = { + .driver = { + .name = "iproc-pcie", +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -30,20 +30,16 @@ + + #include "pcie-iproc.h" + +-#define CLK_CONTROL_OFFSET 0x000 + #define EP_PERST_SOURCE_SELECT_SHIFT 2 + #define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT) + #define EP_MODE_SURVIVE_PERST_SHIFT 1 + #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT) + #define RC_PCIE_RST_OUTPUT_SHIFT 0 + #define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT) ++#define PAXC_RESET_MASK 0x7f + +-#define CFG_IND_ADDR_OFFSET 0x120 + #define CFG_IND_ADDR_MASK 0x00001ffc + +-#define CFG_IND_DATA_OFFSET 0x124 +- +-#define CFG_ADDR_OFFSET 0x1f8 + #define CFG_ADDR_BUS_NUM_SHIFT 20 + #define CFG_ADDR_BUS_NUM_MASK 0x0ff00000 + #define CFG_ADDR_DEV_NUM_SHIFT 15 +@@ -55,12 +51,8 @@ + #define CFG_ADDR_CFG_TYPE_SHIFT 0 + #define CFG_ADDR_CFG_TYPE_MASK 0x00000003 + +-#define CFG_DATA_OFFSET 0x1fc +- +-#define SYS_RC_INTX_EN 0x330 + #define SYS_RC_INTX_MASK 0xf + +-#define PCIE_LINK_STATUS_OFFSET 0xf0c + #define PCIE_PHYLINKUP_SHIFT 3 + #define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT) + #define PCIE_DL_ACTIVE_SHIFT 2 +@@ -71,12 +63,54 @@ + #define OARR_SIZE_CFG_SHIFT 1 + #define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT) + +-#define OARR_LO(window) (0xd20 + (window) * 8) +-#define OARR_HI(window) (0xd24 + (window) * 8) +-#define OMAP_LO(window) (0xd40 + (window) * 8) +-#define OMAP_HI(window) (0xd44 + (window) * 8) +- + #define MAX_NUM_OB_WINDOWS 2 ++#define MAX_NUM_PAXC_PF 4 ++ ++#define IPROC_PCIE_REG_INVALID 0xffff ++ ++enum iproc_pcie_reg { ++ IPROC_PCIE_CLK_CTRL = 0, ++ IPROC_PCIE_CFG_IND_ADDR, ++ IPROC_PCIE_CFG_IND_DATA, ++ IPROC_PCIE_CFG_ADDR, ++ IPROC_PCIE_CFG_DATA, ++ IPROC_PCIE_INTX_EN, ++ IPROC_PCIE_OARR_LO, ++ IPROC_PCIE_OARR_HI, ++ IPROC_PCIE_OMAP_LO, ++ IPROC_PCIE_OMAP_HI, ++ IPROC_PCIE_LINK_STATUS, ++}; ++ ++/* iProc PCIe PAXB registers */ ++static const u16 iproc_pcie_reg_paxb[] = { ++ [IPROC_PCIE_CLK_CTRL] = 0x000, ++ [IPROC_PCIE_CFG_IND_ADDR] = 0x120, ++ [IPROC_PCIE_CFG_IND_DATA] = 0x124, ++ [IPROC_PCIE_CFG_ADDR] = 0x1f8, ++ [IPROC_PCIE_CFG_DATA] = 0x1fc, ++ [IPROC_PCIE_INTX_EN] = 0x330, ++ [IPROC_PCIE_OARR_LO] = 0xd20, ++ [IPROC_PCIE_OARR_HI] = 0xd24, ++ [IPROC_PCIE_OMAP_LO] = 0xd40, ++ [IPROC_PCIE_OMAP_HI] = 0xd44, ++ [IPROC_PCIE_LINK_STATUS] = 0xf0c, ++}; ++ ++/* iProc PCIe PAXC v1 registers */ ++static const u16 iproc_pcie_reg_paxc[] = { ++ [IPROC_PCIE_CLK_CTRL] = 0x000, ++ [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0, ++ [IPROC_PCIE_CFG_IND_DATA] = 0x1f4, ++ [IPROC_PCIE_CFG_ADDR] = 0x1f8, ++ [IPROC_PCIE_CFG_DATA] = 0x1fc, ++ [IPROC_PCIE_INTX_EN] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_OARR_LO] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_OARR_HI] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_OMAP_LO] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_OMAP_HI] = IPROC_PCIE_REG_INVALID, ++ [IPROC_PCIE_LINK_STATUS] = IPROC_PCIE_REG_INVALID, ++}; + + static inline struct iproc_pcie *iproc_data(struct pci_bus *bus) + { +@@ -91,6 +125,65 @@ static inline struct iproc_pcie *iproc_d + return pcie; + } + ++static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset) ++{ ++ return !!(reg_offset == IPROC_PCIE_REG_INVALID); ++} ++ ++static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie, ++ enum iproc_pcie_reg reg) ++{ ++ return pcie->reg_offsets[reg]; ++} ++ ++static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie, ++ enum iproc_pcie_reg reg) ++{ ++ u16 offset = iproc_pcie_reg_offset(pcie, reg); ++ ++ if (iproc_pcie_reg_is_invalid(offset)) ++ return 0; ++ ++ return readl(pcie->base + offset); ++} ++ ++static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie, ++ enum iproc_pcie_reg reg, u32 val) ++{ ++ u16 offset = iproc_pcie_reg_offset(pcie, reg); ++ ++ if (iproc_pcie_reg_is_invalid(offset)) ++ return; ++ ++ writel(val, pcie->base + offset); ++} ++ ++static inline void iproc_pcie_ob_write(struct iproc_pcie *pcie, ++ enum iproc_pcie_reg reg, ++ unsigned window, u32 val) ++{ ++ u16 offset = iproc_pcie_reg_offset(pcie, reg); ++ ++ if (iproc_pcie_reg_is_invalid(offset)) ++ return; ++ ++ writel(val, pcie->base + offset + (window * 8)); ++} ++ ++static inline bool iproc_pcie_device_is_valid(struct iproc_pcie *pcie, ++ unsigned int slot, ++ unsigned int fn) ++{ ++ if (slot > 0) ++ return false; ++ ++ /* PAXC can only support limited number of functions */ ++ if (pcie->type == IPROC_PCIE_PAXC && fn >= MAX_NUM_PAXC_PF) ++ return false; ++ ++ return true; ++} ++ + /** + * Note access to the configuration registers are protected at the higher layer + * by 'pci_lock' in drivers/pci/access.c +@@ -104,28 +197,34 @@ static void __iomem *iproc_pcie_map_cfg_ + unsigned fn = PCI_FUNC(devfn); + unsigned busno = bus->number; + u32 val; ++ u16 offset; ++ ++ if (!iproc_pcie_device_is_valid(pcie, slot, fn)) ++ return NULL; + + /* root complex access */ + if (busno == 0) { +- if (slot >= 1) ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR, ++ where & CFG_IND_ADDR_MASK); ++ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA); ++ if (iproc_pcie_reg_is_invalid(offset)) + return NULL; +- writel(where & CFG_IND_ADDR_MASK, +- pcie->base + CFG_IND_ADDR_OFFSET); +- return (pcie->base + CFG_IND_DATA_OFFSET); ++ else ++ return (pcie->base + offset); + } + +- if (fn > 1) +- return NULL; +- + /* EP device access */ + val = (busno << CFG_ADDR_BUS_NUM_SHIFT) | + (slot << CFG_ADDR_DEV_NUM_SHIFT) | + (fn << CFG_ADDR_FUNC_NUM_SHIFT) | + (where & CFG_ADDR_REG_NUM_MASK) | + (1 & CFG_ADDR_CFG_TYPE_MASK); +- writel(val, pcie->base + CFG_ADDR_OFFSET); +- +- return (pcie->base + CFG_DATA_OFFSET); ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val); ++ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA); ++ if (iproc_pcie_reg_is_invalid(offset)) ++ return NULL; ++ else ++ return (pcie->base + offset); + } + + static struct pci_ops iproc_pcie_ops = { +@@ -138,18 +237,29 @@ static void iproc_pcie_reset(struct ipro + { + u32 val; + ++ if (pcie->type == IPROC_PCIE_PAXC) { ++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); ++ val &= ~PAXC_RESET_MASK; ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); ++ udelay(100); ++ val |= PAXC_RESET_MASK; ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); ++ udelay(100); ++ return; ++ } ++ + /* + * Select perst_b signal as reset source. Put the device into reset, + * and then bring it out of reset + */ +- val = readl(pcie->base + CLK_CONTROL_OFFSET); ++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL); + val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST & + ~RC_PCIE_RST_OUTPUT; +- writel(val, pcie->base + CLK_CONTROL_OFFSET); ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); + udelay(250); + + val |= RC_PCIE_RST_OUTPUT; +- writel(val, pcie->base + CLK_CONTROL_OFFSET); ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val); + msleep(100); + } + +@@ -160,7 +270,14 @@ static int iproc_pcie_check_link(struct + u16 pos, link_status; + bool link_is_active = false; + +- val = readl(pcie->base + PCIE_LINK_STATUS_OFFSET); ++ /* ++ * PAXC connects to emulated endpoint devices directly and does not ++ * have a Serdes. Therefore skip the link detection logic here ++ */ ++ if (pcie->type == IPROC_PCIE_PAXC) ++ return 0; ++ ++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS); + if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) { + dev_err(pcie->dev, "PHY or data link is INACTIVE!\n"); + return -ENODEV; +@@ -221,7 +338,7 @@ static int iproc_pcie_check_link(struct + + static void iproc_pcie_enable(struct iproc_pcie *pcie) + { +- writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN); ++ iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK); + } + + /** +@@ -272,11 +389,15 @@ static int iproc_pcie_setup_ob(struct ip + axi_addr -= ob->axi_offset; + + for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) { +- writel(lower_32_bits(axi_addr) | OARR_VALID | +- (ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i)); +- writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i)); +- writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i)); +- writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i)); ++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_LO, i, ++ lower_32_bits(axi_addr) | OARR_VALID | ++ (ob->set_oarr_size ? 1 : 0)); ++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_HI, i, ++ upper_32_bits(axi_addr)); ++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_LO, i, ++ lower_32_bits(pci_addr)); ++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_HI, i, ++ upper_32_bits(pci_addr)); + + size -= ob->window_size; + if (size == 0) +@@ -340,6 +461,19 @@ int iproc_pcie_setup(struct iproc_pcie * + goto err_exit_phy; + } + ++ switch (pcie->type) { ++ case IPROC_PCIE_PAXB: ++ pcie->reg_offsets = iproc_pcie_reg_paxb; ++ break; ++ case IPROC_PCIE_PAXC: ++ pcie->reg_offsets = iproc_pcie_reg_paxc; ++ break; ++ default: ++ dev_err(pcie->dev, "incompatible iProc PCIe interface\n"); ++ ret = -EINVAL; ++ goto err_power_off_phy; ++ } ++ + iproc_pcie_reset(pcie); + + if (pcie->need_ob_cfg) { +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -15,6 +15,20 @@ + #define _PCIE_IPROC_H + + /** ++ * iProc PCIe interface type ++ * ++ * PAXB is the wrapper used in root complex that can be connected to an ++ * external endpoint device ++ * ++ * PAXC is the wrapper used in root complex dedicated for internal emulated ++ * endpoint devices ++ */ ++enum iproc_pcie_type { ++ IPROC_PCIE_PAXB = 0, ++ IPROC_PCIE_PAXC, ++}; ++ ++/** + * iProc PCIe outbound mapping + * @set_oarr_size: indicates the OARR size bit needs to be set + * @axi_offset: offset from the AXI address to the internal address used by +@@ -29,7 +43,10 @@ struct iproc_pcie_ob { + + /** + * iProc PCIe device ++ * + * @dev: pointer to device data structure ++ * @type: iProc PCIe interface type ++ * @reg_offsets: register offsets + * @base: PCIe host controller I/O register base + * @sysdata: Per PCI controller data (ARM-specific) + * @root_bus: pointer to root bus +@@ -41,6 +58,8 @@ struct iproc_pcie_ob { + */ + struct iproc_pcie { + struct device *dev; ++ enum iproc_pcie_type type; ++ const u16 *reg_offsets; + void __iomem *base; + #ifdef CONFIG_ARM + struct pci_sys_data sysdata; diff --git a/target/linux/bcm53xx/patches-4.3/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch b/target/linux/bcm53xx/patches-4.3/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch new file mode 100644 index 0000000000..f0b0031237 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch @@ -0,0 +1,67 @@ +From 96b40de5e36ec479dabb88500f1830a87818a809 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Mon, 16 Nov 2015 17:57:33 -0800 +Subject: [PATCH 152/154] PCI: iproc: Add iProc PCIe MSI device tree binding + +This patch updates the iProc PCIe device tree bindings with added +binding information for MSI + +Signed-off-by: Ray Jui +Reviewed-by: Anup Patel +Reviewed-by: Vikram Prakash +Reviewed-by: Scott Branden +--- + .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 35 ++++++++++++++++++++++ + 1 file changed, 35 insertions(+) + +--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt ++++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +@@ -35,6 +35,28 @@ Optional: + - brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to + increase the outbound window size + ++MSI support (optional): ++ ++For older platforms without MSI integrated in the GIC, iProc PCIe core provides ++an event queue based MSI support. The iProc MSI uses host memories to store ++MSI posted writes in the event queues ++ ++- msi-parent: Link to the device node of the MSI controller. On newer iProc ++platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc ++platforms without MSI support in its interrupt controller, one may use the ++event queue based MSI support integrated within the iProc PCIe core ++ ++When the iProc event queue based MSI is used, one needs to define the ++following properties in the MSI device node: ++- compatible: Must be "brcm,iproc-msi" ++- msi-controller: claims itself as an MSI controller ++- interrupt-parent: Link to its parent interrupt device ++- interrupts: List of interrupt IDs from its parent interrupt device ++ ++Optional properties: ++- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that ++require the interrupt enable registers to be set explicitly to enable MSI ++ + Example: + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; +@@ -61,6 +83,19 @@ Example: + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; ++ ++ msi-parent = <&msi0>; ++ ++ /* iProc event queue based MSI */ ++ msi0: msi@18012000 { ++ compatible = "brcm,iproc-msi"; ++ msi-controller; ++ interrupt-parent = <&gic>; ++ interrupts = , ++ , ++ , ++ , ++ }; + }; + + pcie1: pcie@18013000 { diff --git a/target/linux/bcm53xx/patches-4.3/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch b/target/linux/bcm53xx/patches-4.3/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch new file mode 100644 index 0000000000..ecf2804abd --- /dev/null +++ b/target/linux/bcm53xx/patches-4.3/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch @@ -0,0 +1,886 @@ +From c81922174d61127ff5baad6059ae148794c72276 Mon Sep 17 00:00:00 2001 +From: Ray Jui +Date: Tue, 17 Nov 2015 13:14:37 -0800 +Subject: [PATCH 153/154] PCI: iproc: Add iProc PCIe MSI support + +This patch adds PCIe MSI support for both PAXB and PAXC interfaces on +all iProc based platforms + +The iProc PCIe MSI support deploys an event queue based implementation. +Each event queue is serviced by a GIC interrupt and can support up to 64 +MSI vectors. Host memory is allocated for the event queues, and each event +queue consists of 64 word-sized entries. MSI data is written to the +lower 16-bit of each entry, whereas the upper 16-bit of the entry is +reserved for the controller for internal processing + +Each event queue is tracked by a head pointer and tail pointer. Head +pointer indicates the next entry in the event queue to be processed by +the driver and is updated by the driver after processing is done. +The controller uses the tail pointer as the next MSI data insertion +point. The controller ensures MSI data is flushed to host memory before +updating the tail pointer and then triggering the interrupt + +MSI IRQ affinity is supported by evenly distributing the interrupts to +each CPU core. MSI vector is moved from one GIC interrupt to another in +order to steer to the target CPU + +Therefore, the actual number of supported MSI vectors is: + +M * 64 / N + +where M denotes the number of GIC interrupts (event queues), and N +denotes the number of CPU cores + +This iProc event queue based MSI support should not be used with newer +platforms with integrated MSI support in the GIC (e.g., giv2m or +gicv3-its) + +Signed-off-by: Ray Jui +Reviewed-by: Anup Patel +Reviewed-by: Vikram Prakash +Reviewed-by: Scott Branden +--- + drivers/pci/host/Kconfig | 9 + + drivers/pci/host/Makefile | 1 + + drivers/pci/host/pcie-iproc-bcma.c | 1 + + drivers/pci/host/pcie-iproc-msi.c | 675 +++++++++++++++++++++++++++++++++ + drivers/pci/host/pcie-iproc-platform.c | 1 + + drivers/pci/host/pcie-iproc.c | 26 ++ + drivers/pci/host/pcie-iproc.h | 23 +- + 7 files changed, 734 insertions(+), 2 deletions(-) + create mode 100644 drivers/pci/host/pcie-iproc-msi.c + +--- a/drivers/pci/host/Kconfig ++++ b/drivers/pci/host/Kconfig +@@ -124,6 +124,15 @@ config PCIE_IPROC + iProc family of SoCs. An appropriate bus interface driver also needs + to be enabled + ++config PCIE_IPROC_MSI ++ bool "Broadcom iProc PCIe MSI support" ++ depends on ARCH_BCM_IPROC && PCI_MSI ++ select PCI_MSI_IRQ_DOMAIN ++ default ARCH_BCM_IPROC ++ help ++ Say Y here if you want to enable MSI support for Broadcom's iProc ++ PCIe controller ++ + config PCIE_IPROC_PLATFORM + tristate "Broadcom iProc PCIe platform bus driver" + depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST) +--- a/drivers/pci/host/Makefile ++++ b/drivers/pci/host/Makefile +@@ -15,5 +15,6 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene + obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o + obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o + obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o ++obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o + obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o + obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o +--- a/drivers/pci/host/pcie-iproc-bcma.c ++++ b/drivers/pci/host/pcie-iproc-bcma.c +@@ -55,6 +55,7 @@ static int iproc_pcie_bcma_probe(struct + bcma_set_drvdata(bdev, pcie); + + pcie->base = bdev->io_addr; ++ pcie->base_addr = bdev->addr; + + res_mem.start = bdev->addr_s[0]; + res_mem.end = bdev->addr_s[0] + SZ_128M - 1; +--- /dev/null ++++ b/drivers/pci/host/pcie-iproc-msi.c +@@ -0,0 +1,675 @@ ++/* ++ * Copyright (C) 2015 Broadcom Corporation ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation version 2. ++ * ++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any ++ * kind, whether express or implied; without even the implied warranty ++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pcie-iproc.h" ++ ++#define IPROC_MSI_INTR_EN_SHIFT 11 ++#define IPROC_MSI_INTR_EN BIT(IPROC_MSI_INTR_EN_SHIFT) ++#define IPROC_MSI_INT_N_EVENT_SHIFT 1 ++#define IPROC_MSI_INT_N_EVENT BIT(IPROC_MSI_INT_N_EVENT_SHIFT) ++#define IPROC_MSI_EQ_EN_SHIFT 0 ++#define IPROC_MSI_EQ_EN BIT(IPROC_MSI_EQ_EN_SHIFT) ++ ++#define IPROC_MSI_EQ_MASK 0x3f ++ ++/* max number of GIC interrupts */ ++#define NR_HW_IRQS 6 ++ ++/* number of entries in each event queue */ ++#define EQ_LEN 64 ++ ++/* size of each event queue memory region */ ++#define EQ_MEM_REGION_SIZE SZ_4K ++ ++/* size of each MSI address region */ ++#define MSI_MEM_REGION_SIZE SZ_4K ++ ++enum iproc_msi_reg { ++ IPROC_MSI_EQ_PAGE = 0, ++ IPROC_MSI_EQ_PAGE_UPPER, ++ IPROC_MSI_PAGE, ++ IPROC_MSI_PAGE_UPPER, ++ IPROC_MSI_CTRL, ++ IPROC_MSI_EQ_HEAD, ++ IPROC_MSI_EQ_TAIL, ++ IPROC_MSI_INTS_EN, ++ IPROC_MSI_REG_SIZE, ++}; ++ ++struct iproc_msi; ++ ++/** ++ * iProc MSI group ++ * ++ * One MSI group is allocated per GIC interrupt, serviced by one iProc MSI ++ * event queue ++ * ++ * @msi: pointer to iProc MSI data ++ * @gic_irq: GIC interrupt ++ * @eq: Event queue number ++ */ ++struct iproc_msi_grp { ++ struct iproc_msi *msi; ++ int gic_irq; ++ unsigned int eq; ++}; ++ ++/** ++ * iProc event queue based MSI ++ * ++ * Only meant to be used on platforms without MSI support integrated into the ++ * GIC ++ * ++ * @pcie: pointer to iProc PCIe data ++ * @reg_offsets: MSI register offsets ++ * @grps: MSI groups ++ * @nr_irqs: number of total interrupts connected to GIC ++ * @nr_cpus: number of toal CPUs ++ * @has_inten_reg: indicates the MSI interrupt enable register needs to be ++ * set explicitly (required for some legacy platforms) ++ * @bitmap: MSI vector bitmap ++ * @bitmap_lock: lock to protect access to the MSI bitmap ++ * @nr_msi_vecs: total number of MSI vectors ++ * @inner_domain: inner IRQ domain ++ * @msi_domain: MSI IRQ domain ++ * @nr_eq_region: required number of 4K aligned memory region for MSI event ++ * queues ++ * @nr_msi_region: required number of 4K aligned address region for MSI posted ++ * writes ++ * @eq_cpu: pointer to allocated memory region for MSI event queues ++ * @eq_dma: DMA address of MSI event queues ++ * @msi_addr: MSI address ++ */ ++struct iproc_msi { ++ struct iproc_pcie *pcie; ++ const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE]; ++ struct iproc_msi_grp *grps; ++ int nr_irqs; ++ int nr_cpus; ++ bool has_inten_reg; ++ unsigned long *bitmap; ++ struct mutex bitmap_lock; ++ unsigned int nr_msi_vecs; ++ struct irq_domain *inner_domain; ++ struct irq_domain *msi_domain; ++ unsigned int nr_eq_region; ++ unsigned int nr_msi_region; ++ void *eq_cpu; ++ dma_addr_t eq_dma; ++ phys_addr_t msi_addr; ++}; ++ ++static const u16 iproc_msi_reg_paxb[NR_HW_IRQS][IPROC_MSI_REG_SIZE] = { ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274, 0x208 }, ++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c, 0x208 }, ++}; ++ ++static const u16 iproc_msi_reg_paxc[NR_HW_IRQS][IPROC_MSI_REG_SIZE] = { ++ { 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 }, ++ { 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 }, ++ { 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 }, ++ { 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c }, ++}; ++ ++static inline u32 iproc_msi_read_reg(struct iproc_msi *msi, ++ enum iproc_msi_reg reg, ++ unsigned int eq) ++{ ++ struct iproc_pcie *pcie = msi->pcie; ++ ++ return readl_relaxed(pcie->base + msi->reg_offsets[eq][reg]); ++} ++ ++static inline void iproc_msi_write_reg(struct iproc_msi *msi, ++ enum iproc_msi_reg reg, ++ int eq, u32 val) ++{ ++ struct iproc_pcie *pcie = msi->pcie; ++ ++ writel_relaxed(val, pcie->base + msi->reg_offsets[eq][reg]); ++} ++ ++static inline u32 hwirq_to_group(struct iproc_msi *msi, unsigned long hwirq) ++{ ++ return (hwirq % msi->nr_irqs); ++} ++ ++static inline unsigned int iproc_msi_addr_offset(struct iproc_msi *msi, ++ unsigned long hwirq) ++{ ++ if (msi->nr_msi_region > 1) ++ return hwirq_to_group(msi, hwirq) * MSI_MEM_REGION_SIZE; ++ else ++ return hwirq_to_group(msi, hwirq) * sizeof(u32); ++} ++ ++static inline unsigned int iproc_msi_eq_offset(struct iproc_msi *msi, u32 eq) ++{ ++ if (msi->nr_eq_region > 1) ++ return eq * EQ_MEM_REGION_SIZE; ++ else ++ return eq * EQ_LEN * sizeof(u32); ++} ++ ++static struct irq_chip iproc_msi_irq_chip = { ++ .name = "iProc-MSI", ++}; ++ ++static struct msi_domain_info iproc_msi_domain_info = { ++ .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ++ MSI_FLAG_PCI_MSIX, ++ .chip = &iproc_msi_irq_chip, ++}; ++ ++/* ++ * In iProc PCIe core, each MSI group is serviced by a GIC interrupt and a ++ * dedicated event queue. Each MSI group can support up to 64 MSI vectors ++ * ++ * The number of MSI groups varies between different iProc SoCs. The total ++ * number of CPU cores also varies. To support MSI IRQ affinity, we ++ * distribute GIC interrupts across all available CPUs. MSI vector is moved ++ * from one GIC interrupt to another to steer to the target CPU ++ * ++ * Assuming: ++ * - the number of MSI groups is M ++ * - the number of CPU cores is N ++ * - M is always a multiple of N ++ * ++ * Total number of raw MSI vectors = M * 64 ++ * Total number of supported MSI vectors = (M * 64) / N ++ */ ++static inline int hwirq_to_cpu(struct iproc_msi *msi, unsigned long hwirq) ++{ ++ return (hwirq % msi->nr_cpus); ++} ++ ++static inline unsigned long hwirq_to_canonical_hwirq(struct iproc_msi *msi, ++ unsigned long hwirq) ++{ ++ return (hwirq - hwirq_to_cpu(msi, hwirq)); ++} ++ ++static int iproc_msi_irq_set_affinity(struct irq_data *data, ++ const struct cpumask *mask, bool force) ++{ ++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data); ++ int target_cpu = cpumask_first(mask); ++ int curr_cpu; ++ ++ curr_cpu = hwirq_to_cpu(msi, data->hwirq); ++ if (curr_cpu == target_cpu) ++ return IRQ_SET_MASK_OK_DONE; ++ ++ /* steer MSI to the target CPU */ ++ data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu; ++ ++ return IRQ_SET_MASK_OK; ++} ++ ++static void iproc_msi_irq_compose_msi_msg(struct irq_data *data, ++ struct msi_msg *msg) ++{ ++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data); ++ dma_addr_t addr; ++ ++ addr = msi->msi_addr + iproc_msi_addr_offset(msi, data->hwirq); ++ msg->address_lo = lower_32_bits(addr); ++ msg->address_hi = upper_32_bits(addr); ++ msg->data = data->hwirq; ++} ++ ++static struct irq_chip iproc_msi_bottom_irq_chip = { ++ .name = "MSI", ++ .irq_set_affinity = iproc_msi_irq_set_affinity, ++ .irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg, ++}; ++ ++static int iproc_msi_irq_domain_alloc(struct irq_domain *domain, ++ unsigned int virq, unsigned int nr_irqs, ++ void *args) ++{ ++ struct iproc_msi *msi = domain->host_data; ++ int hwirq; ++ ++ mutex_lock(&msi->bitmap_lock); ++ ++ /* allocate 'nr_cpus' number of MSI vectors each time */ ++ hwirq = bitmap_find_next_zero_area(msi->bitmap, msi->nr_msi_vecs, 0, ++ msi->nr_cpus, 0); ++ if (hwirq < msi->nr_msi_vecs) { ++ bitmap_set(msi->bitmap, hwirq, msi->nr_cpus); ++ } else { ++ mutex_unlock(&msi->bitmap_lock); ++ return -ENOSPC; ++ } ++ ++ mutex_unlock(&msi->bitmap_lock); ++ ++ irq_domain_set_info(domain, virq, hwirq, &iproc_msi_bottom_irq_chip, ++ domain->host_data, handle_simple_irq, NULL, NULL); ++ ++ return 0; ++} ++ ++static void iproc_msi_irq_domain_free(struct irq_domain *domain, ++ unsigned int virq, unsigned int nr_irqs) ++{ ++ struct irq_data *data = irq_domain_get_irq_data(domain, virq); ++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data); ++ unsigned int hwirq; ++ ++ mutex_lock(&msi->bitmap_lock); ++ ++ hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq); ++ bitmap_clear(msi->bitmap, hwirq, msi->nr_cpus); ++ ++ mutex_unlock(&msi->bitmap_lock); ++ ++ irq_domain_free_irqs_parent(domain, virq, nr_irqs); ++} ++ ++static const struct irq_domain_ops msi_domain_ops = { ++ .alloc = iproc_msi_irq_domain_alloc, ++ .free = iproc_msi_irq_domain_free, ++}; ++ ++static inline u32 decode_msi_hwirq(struct iproc_msi *msi, u32 eq, u32 head) ++{ ++ u32 *msg, hwirq; ++ unsigned int offs; ++ ++ offs = iproc_msi_eq_offset(msi, eq) + head * sizeof(u32); ++ msg = (u32 *)(msi->eq_cpu + offs); ++ hwirq = *msg & IPROC_MSI_EQ_MASK; ++ ++ /* ++ * Since we have multiple hwirq mapped to a single MSI vector, ++ * now we need to derive the hwirq at CPU0. It can then be used to ++ * mapped back to virq ++ */ ++ return hwirq_to_canonical_hwirq(msi, hwirq); ++} ++ ++static void iproc_msi_handler(struct irq_desc *desc) ++{ ++ struct irq_chip *chip = irq_desc_get_chip(desc); ++ struct iproc_msi_grp *grp; ++ struct iproc_msi *msi; ++ struct iproc_pcie *pcie; ++ u32 eq, head, tail, nr_events; ++ unsigned long hwirq; ++ int virq; ++ ++ chained_irq_enter(chip, desc); ++ ++ grp = irq_desc_get_handler_data(desc); ++ msi = grp->msi; ++ pcie = msi->pcie; ++ eq = grp->eq; ++ ++ /* ++ * iProc MSI event queue is tracked by head and tail pointers. Head ++ * pointer indicates the next entry (MSI data) to be consumed by SW in ++ * the queue and needs to be updated by SW. iProc MSI core uses the ++ * tail pointer as the next data insertion point ++ * ++ * Entries between head and tail pointers contain valid MSI data. MSI ++ * data is guaranteed to be in the event queue memory before the tail ++ * pointer is updated by the iProc MSI core ++ */ ++ head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD, ++ eq) & IPROC_MSI_EQ_MASK; ++ do { ++ tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL, ++ eq) & IPROC_MSI_EQ_MASK; ++ ++ /* ++ * Figure out total number of events (MSI data) to be ++ * processed ++ */ ++ nr_events = (tail < head) ? ++ (EQ_LEN - (head - tail)) : (tail - head); ++ if (!nr_events) ++ break; ++ ++ /* process all outstanding events */ ++ while (nr_events--) { ++ hwirq = decode_msi_hwirq(msi, eq, head); ++ virq = irq_find_mapping(msi->inner_domain, hwirq); ++ generic_handle_irq(virq); ++ ++ head++; ++ head %= EQ_LEN; ++ } ++ ++ /* ++ * Now all outstanding events have been processed. Update the ++ * head pointer ++ */ ++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head); ++ ++ /* ++ * Now go read the tail pointer again to see if there are new ++ * oustanding events that came in during the above window ++ */ ++ } while (true); ++ ++ chained_irq_exit(chip, desc); ++} ++ ++static void iproc_msi_enable(struct iproc_msi *msi) ++{ ++ int i, eq; ++ u32 val; ++ ++ /* program memory region for each event queue */ ++ for (i = 0; i < msi->nr_eq_region; i++) { ++ dma_addr_t addr = msi->eq_dma + (i * EQ_MEM_REGION_SIZE); ++ ++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i, ++ lower_32_bits(addr)); ++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i, ++ upper_32_bits(addr)); ++ } ++ ++ /* program address region for MSI posted writes */ ++ for (i = 0; i < msi->nr_msi_region; i++) { ++ phys_addr_t addr = msi->msi_addr + (i * MSI_MEM_REGION_SIZE); ++ ++ iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i, ++ lower_32_bits(addr)); ++ iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i, ++ upper_32_bits(addr)); ++ } ++ ++ for (eq = 0; eq < msi->nr_irqs; eq++) { ++ /* enable MSI event queue */ ++ val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT | ++ IPROC_MSI_EQ_EN; ++ iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val); ++ ++ /* ++ * Some legacy platforms require the MSI interrupt enable ++ * register to be set explicitly ++ */ ++ if (msi->has_inten_reg) { ++ val = iproc_msi_read_reg(msi, IPROC_MSI_INTS_EN, eq); ++ val |= BIT(eq); ++ iproc_msi_write_reg(msi, IPROC_MSI_INTS_EN, eq, val); ++ } ++ } ++} ++ ++static void iproc_msi_disable(struct iproc_msi *msi) ++{ ++ u32 eq, val; ++ ++ for (eq = 0; eq < msi->nr_irqs; eq++) { ++ if (msi->has_inten_reg) { ++ val = iproc_msi_read_reg(msi, IPROC_MSI_INTS_EN, eq); ++ val &= ~BIT(eq); ++ iproc_msi_write_reg(msi, IPROC_MSI_INTS_EN, eq, val); ++ } ++ ++ val = iproc_msi_read_reg(msi, IPROC_MSI_CTRL, eq); ++ val &= ~(IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT | ++ IPROC_MSI_EQ_EN); ++ iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val); ++ } ++} ++ ++static int iproc_msi_alloc_domains(struct device_node *node, ++ struct iproc_msi *msi) ++{ ++ msi->inner_domain = irq_domain_add_linear(NULL, msi->nr_msi_vecs, ++ &msi_domain_ops, msi); ++ if (!msi->inner_domain) ++ return -ENOMEM; ++ ++ msi->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(node), ++ &iproc_msi_domain_info, ++ msi->inner_domain); ++ if (!msi->msi_domain) { ++ irq_domain_remove(msi->inner_domain); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++static void iproc_msi_free_domains(struct iproc_msi *msi) ++{ ++ if (msi->msi_domain) ++ irq_domain_remove(msi->msi_domain); ++ ++ if (msi->inner_domain) ++ irq_domain_remove(msi->inner_domain); ++} ++ ++static void iproc_msi_irq_free(struct iproc_msi *msi, unsigned int cpu) ++{ ++ int i; ++ ++ for (i = cpu; i < msi->nr_irqs; i += msi->nr_cpus) { ++ irq_set_chained_handler_and_data(msi->grps[i].gic_irq, ++ NULL, NULL); ++ } ++} ++ ++static int iproc_msi_irq_setup(struct iproc_msi *msi, unsigned int cpu) ++{ ++ int i, ret; ++ cpumask_var_t mask; ++ struct iproc_pcie *pcie = msi->pcie; ++ ++ for (i = cpu; i < msi->nr_irqs; i += msi->nr_cpus) { ++ irq_set_chained_handler_and_data(msi->grps[i].gic_irq, ++ iproc_msi_handler, ++ &msi->grps[i]); ++ /* dedicate GIC interrupt to each CPU core */ ++ if (alloc_cpumask_var(&mask, GFP_KERNEL)) { ++ cpumask_clear(mask); ++ cpumask_set_cpu(cpu, mask); ++ ret = irq_set_affinity(msi->grps[i].gic_irq, mask); ++ if (ret) ++ dev_err(pcie->dev, ++ "failed to set affinity for IRQ%d\n", ++ msi->grps[i].gic_irq); ++ free_cpumask_var(mask); ++ } else { ++ dev_err(pcie->dev, "failed to alloc CPU mask\n"); ++ ret = -EINVAL; ++ } ++ ++ if (ret) { ++ /* free all configured/unconfigured irqs */ ++ iproc_msi_irq_free(msi, cpu); ++ return ret; ++ } ++ } ++ ++ return 0; ++} ++ ++int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node) ++{ ++ struct iproc_msi *msi; ++ int i, ret; ++ unsigned int cpu; ++ ++ if (!of_device_is_compatible(node, "brcm,iproc-msi")) ++ return -ENODEV; ++ ++ if (!of_find_property(node, "msi-controller", NULL)) ++ return -ENODEV; ++ ++ if (pcie->msi) ++ return -EBUSY; ++ ++ msi = devm_kzalloc(pcie->dev, sizeof(*msi), GFP_KERNEL); ++ if (!msi) ++ return -ENOMEM; ++ ++ msi->pcie = pcie; ++ pcie->msi = msi; ++ msi->msi_addr = pcie->base_addr; ++ mutex_init(&msi->bitmap_lock); ++ msi->nr_cpus = num_possible_cpus(); ++ ++ msi->nr_irqs = of_irq_count(node); ++ if (!msi->nr_irqs) { ++ dev_err(pcie->dev, "found no MSI GIC interrupt\n"); ++ return -ENODEV; ++ } ++ ++ if (msi->nr_irqs > NR_HW_IRQS) { ++ dev_warn(pcie->dev, "too many MSI GIC interrupts defined %d\n", ++ msi->nr_irqs); ++ msi->nr_irqs = NR_HW_IRQS; ++ } ++ ++ if (msi->nr_irqs < msi->nr_cpus) { ++ dev_err(pcie->dev, ++ "not enough GIC interrupts for MSI affinity\n"); ++ return -EINVAL; ++ } ++ ++ if (msi->nr_irqs % msi->nr_cpus != 0) { ++ msi->nr_irqs -= msi->nr_irqs % msi->nr_cpus; ++ dev_warn(pcie->dev, "Reducing number of interrupts to %d\n", ++ msi->nr_irqs); ++ } ++ ++ switch (pcie->type) { ++ case IPROC_PCIE_PAXB: ++ msi->reg_offsets = iproc_msi_reg_paxb; ++ msi->nr_eq_region = 1; ++ msi->nr_msi_region = 1; ++ break; ++ case IPROC_PCIE_PAXC: ++ msi->reg_offsets = iproc_msi_reg_paxc; ++ msi->nr_eq_region = msi->nr_irqs; ++ msi->nr_msi_region = msi->nr_irqs; ++ break; ++ default: ++ dev_err(pcie->dev, "incompatible iProc PCIe interface\n"); ++ return -EINVAL; ++ } ++ ++ if (of_find_property(node, "brcm,pcie-msi-inten", NULL)) ++ msi->has_inten_reg = true; ++ ++ msi->nr_msi_vecs = msi->nr_irqs * EQ_LEN; ++ msi->bitmap = devm_kcalloc(pcie->dev, BITS_TO_LONGS(msi->nr_msi_vecs), ++ sizeof(*msi->bitmap), GFP_KERNEL); ++ if (!msi->bitmap) ++ return -ENOMEM; ++ ++ msi->grps = devm_kcalloc(pcie->dev, msi->nr_irqs, sizeof(*msi->grps), ++ GFP_KERNEL); ++ if (!msi->grps) ++ return -ENOMEM; ++ ++ for (i = 0; i < msi->nr_irqs; i++) { ++ unsigned int irq = irq_of_parse_and_map(node, i); ++ ++ if (!irq) { ++ dev_err(pcie->dev, "unable to parse/map interrupt\n"); ++ ret = -ENODEV; ++ goto free_irqs; ++ } ++ msi->grps[i].gic_irq = irq; ++ msi->grps[i].msi = msi; ++ msi->grps[i].eq = i; ++ } ++ ++ /* reserve memory for event queue and make sure memories are zeroed */ ++ msi->eq_cpu = dma_zalloc_coherent(pcie->dev, ++ msi->nr_eq_region * EQ_MEM_REGION_SIZE, ++ &msi->eq_dma, GFP_KERNEL); ++ if (!msi->eq_cpu) { ++ ret = -ENOMEM; ++ goto free_irqs; ++ } ++ ++ ret = iproc_msi_alloc_domains(node, msi); ++ if (ret) { ++ dev_err(pcie->dev, "failed to create MSI domains\n"); ++ goto free_eq_dma; ++ } ++ ++ for_each_online_cpu(cpu) { ++ ret = iproc_msi_irq_setup(msi, cpu); ++ if (ret) ++ goto free_msi_irq; ++ } ++ ++ iproc_msi_enable(msi); ++ ++ return 0; ++ ++free_msi_irq: ++ for_each_online_cpu(cpu) ++ iproc_msi_irq_free(msi, cpu); ++ iproc_msi_free_domains(msi); ++ ++free_eq_dma: ++ dma_free_coherent(pcie->dev, msi->nr_eq_region * EQ_MEM_REGION_SIZE, ++ msi->eq_cpu, msi->eq_dma); ++ ++free_irqs: ++ for (i = 0; i < msi->nr_irqs; i++) { ++ if (msi->grps[i].gic_irq) ++ irq_dispose_mapping(msi->grps[i].gic_irq); ++ } ++ pcie->msi = NULL; ++ return ret; ++} ++EXPORT_SYMBOL(iproc_msi_init); ++ ++void iproc_msi_exit(struct iproc_pcie *pcie) ++{ ++ struct iproc_msi *msi = pcie->msi; ++ unsigned int i, cpu; ++ ++ if (!msi) ++ return; ++ ++ iproc_msi_disable(msi); ++ ++ for_each_online_cpu(cpu) ++ iproc_msi_irq_free(msi, cpu); ++ ++ iproc_msi_free_domains(msi); ++ ++ dma_free_coherent(pcie->dev, msi->nr_eq_region * EQ_MEM_REGION_SIZE, ++ msi->eq_cpu, msi->eq_dma); ++ ++ for (i = 0; i < msi->nr_irqs; i++) { ++ if (msi->grps[i].gic_irq) ++ irq_dispose_mapping(msi->grps[i].gic_irq); ++ } ++} ++EXPORT_SYMBOL(iproc_msi_exit); +--- a/drivers/pci/host/pcie-iproc-platform.c ++++ b/drivers/pci/host/pcie-iproc-platform.c +@@ -71,6 +71,7 @@ static int iproc_pcie_pltfm_probe(struct + dev_err(pcie->dev, "unable to map controller registers\n"); + return -ENOMEM; + } ++ pcie->base_addr = reg.start; + + if (of_property_read_bool(np, "brcm,pcie-ob")) { + u32 val; +--- a/drivers/pci/host/pcie-iproc.c ++++ b/drivers/pci/host/pcie-iproc.c +@@ -440,6 +440,26 @@ static int iproc_pcie_map_ranges(struct + return 0; + } + ++static int iproc_pcie_msi_enable(struct iproc_pcie *pcie) ++{ ++ struct device_node *msi_node; ++ ++ msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0); ++ if (!msi_node) ++ return -ENODEV; ++ ++ /* ++ * If another MSI controller is being used, the call below should fail ++ * but that is okay ++ */ ++ return iproc_msi_init(pcie, msi_node); ++} ++ ++static void iproc_pcie_msi_disable(struct iproc_pcie *pcie) ++{ ++ iproc_msi_exit(pcie); ++} ++ + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res) + { + int ret; +@@ -507,6 +527,10 @@ int iproc_pcie_setup(struct iproc_pcie * + + iproc_pcie_enable(pcie); + ++ if (IS_ENABLED(CONFIG_PCI_MSI)) ++ if (iproc_pcie_msi_enable(pcie)) ++ dev_info(pcie->dev, "not using iProc MSI\n"); ++ + pci_scan_child_bus(bus); + pci_assign_unassigned_bus_resources(bus); + pci_fixup_irqs(pci_common_swizzle, pcie->map_irq); +@@ -531,6 +555,8 @@ int iproc_pcie_remove(struct iproc_pcie + pci_stop_root_bus(pcie->root_bus); + pci_remove_root_bus(pcie->root_bus); + ++ iproc_pcie_msi_disable(pcie); ++ + phy_power_off(pcie->phy); + phy_exit(pcie->phy); + +--- a/drivers/pci/host/pcie-iproc.h ++++ b/drivers/pci/host/pcie-iproc.h +@@ -41,6 +41,8 @@ struct iproc_pcie_ob { + resource_size_t window_size; + }; + ++struct iproc_msi; ++ + /** + * iProc PCIe device + * +@@ -48,19 +50,21 @@ struct iproc_pcie_ob { + * @type: iProc PCIe interface type + * @reg_offsets: register offsets + * @base: PCIe host controller I/O register base ++ * @base_addr: PCIe host controller register base physical address + * @sysdata: Per PCI controller data (ARM-specific) + * @root_bus: pointer to root bus + * @phy: optional PHY device that controls the Serdes +- * @irqs: interrupt IDs + * @map_irq: function callback to map interrupts +- * @need_ob_cfg: indidates SW needs to configure the outbound mapping window ++ * @need_ob_cfg: indicates SW needs to configure the outbound mapping window + * @ob: outbound mapping parameters ++ * @msi: MSI data + */ + struct iproc_pcie { + struct device *dev; + enum iproc_pcie_type type; + const u16 *reg_offsets; + void __iomem *base; ++ phys_addr_t base_addr; + #ifdef CONFIG_ARM + struct pci_sys_data sysdata; + #endif +@@ -69,9 +73,24 @@ struct iproc_pcie { + int (*map_irq)(const struct pci_dev *, u8, u8); + bool need_ob_cfg; + struct iproc_pcie_ob ob; ++ struct iproc_msi *msi; + }; + + int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res); + int iproc_pcie_remove(struct iproc_pcie *pcie); + ++#ifdef CONFIG_PCI_MSI ++int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node); ++void iproc_msi_exit(struct iproc_pcie *pcie); ++#else ++static inline int iproc_msi_init(struct iproc_pcie *pcie, ++ struct device_node *node) ++{ ++ return -ENODEV; ++} ++static void iproc_msi_exit(struct iproc_pcie *pcie) ++{ ++} ++#endif ++ + #endif /* _PCIE_IPROC_H */