From: Manu Abraham Date: Sun, 14 Nov 2010 18:52:10 +0000 (-0300) Subject: [media] stb6100: Improve tuner performance X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f14bfe94e459cb070a489e1786f26d54e9e7b5de;p=openwrt%2Fstaging%2Fblogic.git [media] stb6100: Improve tuner performance - Reduce the amount of white noise present, which causes the demodulator a significant time to acquire a frontend lock on a whole. Frontend shows a large significant improvement in performance. Thanks to Peter Nayler for helping to identify the potential hotspots and fixing them. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c index 80a9e4cba631..db66248fed46 100644 --- a/drivers/media/dvb/frontends/stb6100.c +++ b/drivers/media/dvb/frontends/stb6100.c @@ -51,7 +51,7 @@ module_param(verbose, int, 0644); if (x > y) \ printk(format, ##arg); \ } \ -} while(0) +} while (0) struct stb6100_lkup { u32 val_low; @@ -157,13 +157,25 @@ static int stb6100_read_reg(struct stb6100_state *state, u8 reg) u8 regs[STB6100_NUMREGS]; int rc; + struct i2c_msg msg = { + .addr = state->config->tuner_address + reg, + .flags = I2C_M_RD, + .buf = regs, + .len = 1 + }; + + rc = i2c_transfer(state->i2c, &msg, 1); + if (unlikely(reg >= STB6100_NUMREGS)) { dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg); return -EINVAL; } - if ((rc = stb6100_read_regs(state, regs)) < 0) - return rc; - return (unsigned int)regs[reg]; + if (unlikely(verbose > FE_DEBUG)) { + dprintk(verbose, FE_DEBUG, 1, " Read from 0x%02x", state->config->tuner_address); + dprintk(verbose, FE_DEBUG, 1, " %s: 0x%02x", stb6100_regnames[reg], regs[0]); + } + + return (unsigned int)regs[0]; } static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len) @@ -211,20 +223,17 @@ static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data) return stb6100_write_reg_range(state, &data, reg, 1); } -static int stb6100_write_regs(struct stb6100_state *state, u8 regs[]) -{ - stb6100_normalise_regs(regs); - return stb6100_write_reg_range(state, ®s[1], 1, STB6100_NUMREGS - 1); -} static int stb6100_get_status(struct dvb_frontend *fe, u32 *status) { int rc; struct stb6100_state *state = fe->tuner_priv; - if ((rc = stb6100_read_reg(state, STB6100_LD)) < 0) + rc = stb6100_read_reg(state, STB6100_LD); + if (rc < 0) { + dprintk(verbose, FE_ERROR, 1, "%s failed", __func__); return rc; - + } return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0; } @@ -234,7 +243,8 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) u8 f; struct stb6100_state *state = fe->tuner_priv; - if ((rc = stb6100_read_reg(state, STB6100_F)) < 0) + rc = stb6100_read_reg(state, STB6100_F); + if (rc < 0) return rc; f = rc & STB6100_F_F; @@ -265,14 +275,21 @@ static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth) /* Turn on LPF bandwidth setting clock control, * set bandwidth, wait 10ms, turn off. */ - if ((rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK)) < 0) + rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK); + if (rc < 0) return rc; - if ((rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp)) < 0) + rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp); + if (rc < 0) return rc; - msleep(1); - if ((rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d)) < 0) + + msleep(5); /* This is dangerous as another (related) thread may start */ + + rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d); + if (rc < 0) return rc; + msleep(10); /* This is dangerous as another (related) thread may start */ + return 0; } @@ -284,7 +301,8 @@ static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency) struct stb6100_state *state = fe->tuner_priv; u8 regs[STB6100_NUMREGS]; - if ((rc = stb6100_read_regs(state, regs)) < 0) + rc = stb6100_read_regs(state, regs); + if (rc < 0) return rc; odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT; @@ -312,8 +330,7 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency) u8 regs[STB6100_NUMREGS]; u8 g, psd2, odiv; - if ((rc = stb6100_read_regs(state, regs)) < 0) - return rc; + dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51"); if (fe->ops.get_frontend) { dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters"); @@ -321,96 +338,140 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency) } srate = p.u.qpsk.symbol_rate; - regs[STB6100_DLB] = 0xdc; - /* Disable LPEN */ - regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN; /* PLL Loop disabled */ + /* Set up tuner cleanly, LPF calibration on */ + rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK); + if (rc < 0) + return rc; /* allow LPF calibration */ - if ((rc = stb6100_write_regs(state, regs)) < 0) + /* PLL Loop disabled, bias on, VCO on, synth on */ + regs[STB6100_LPEN] = 0xeb; + rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]); + if (rc < 0) return rc; - /* Baseband gain. */ - if (srate >= 15000000) - g = 9; // +4 dB - else if (srate >= 5000000) - g = 11; // +8 dB - else - g = 14; // +14 dB - - regs[STB6100_G] = (regs[STB6100_G] & ~STB6100_G_G) | g; - regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */ - regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */ + /* Program the registers with their data values */ /* VCO divide ratio (LO divide ratio, VCO prescaler enable). */ if (frequency <= 1075000) odiv = 1; else odiv = 0; - regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_ODIV) | (odiv << STB6100_VCO_ODIV_SHIFT); - if ((frequency > 1075000) && (frequency <= 1325000)) - psd2 = 0; - else - psd2 = 1; - regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT); + /* VCO enabled, seach clock off as per LL3.7, 3.4.1 */ + regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT); /* OSM */ for (ptr = lkup; (ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high); ptr++); + if (ptr->val_high == 0) { printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency); return -EINVAL; } regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg; + rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]); + if (rc < 0) + return rc; + if ((frequency > 1075000) && (frequency <= 1325000)) + psd2 = 0; + else + psd2 = 1; /* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4) */ fvco = frequency << (1 + odiv); /* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1))) */ nint = fvco / (state->reference << psd2); /* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9 */ nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2)) - << (9 - psd2), - state->reference); + << (9 - psd2), state->reference); + + /* NI */ + regs[STB6100_NI] = nint; + rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]); + if (rc < 0) + return rc; + + /* NF */ + regs[STB6100_NF_LSB] = nfrac; + rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]); + if (rc < 0) + return rc; + + /* K */ + regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT); + regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB); + rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]); + if (rc < 0) + return rc; + + /* G Baseband gain. */ + if (srate >= 15000000) + g = 9; /* +4 dB */ + else if (srate >= 5000000) + g = 11; /* +8 dB */ + else + g = 14; /* +14 dB */ + + regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g; + regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */ + regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */ + rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]); + if (rc < 0) + return rc; + + /* F we don't write as it is set up in BW set */ + + /* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */ + regs[STB6100_DLB] = 0xcc; + rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]); + if (rc < 0) + return rc; + dprintk(verbose, FE_DEBUG, 1, "frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u", frequency, srate, (unsigned int)g, (unsigned int)odiv, (unsigned int)psd2, state->reference, ptr->reg, fvco, nint, nfrac); - regs[STB6100_NI] = nint; - regs[STB6100_NF_LSB] = nfrac; - regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB); - regs[STB6100_VCO] |= STB6100_VCO_OSCH; /* VCO search enabled */ - regs[STB6100_VCO] |= STB6100_VCO_OCK; /* VCO search clock off */ - regs[STB6100_FCCK] |= STB6100_FCCK_FCCK; /* LPF BW setting clock enabled */ - regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN; /* PLL loop disabled */ - /* Power up. */ - regs[STB6100_LPEN] |= STB6100_LPEN_SYNP | STB6100_LPEN_OSCP | STB6100_LPEN_BEN; - msleep(2); - if ((rc = stb6100_write_regs(state, regs)) < 0) + /* Set up the test registers */ + regs[STB6100_TEST1] = 0x8f; + rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]); + if (rc < 0) + return rc; + regs[STB6100_TEST3] = 0xde; + rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]); + if (rc < 0) return rc; - msleep(2); - regs[STB6100_LPEN] |= STB6100_LPEN_LPEN; /* PLL loop enabled */ - if ((rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN])) < 0) + /* Bring up tuner according to LLA 3.7 3.4.1, step 2 */ + regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */ + rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]); + if (rc < 0) return rc; + msleep(2); + + /* Bring up tuner according to LLA 3.7 3.4.1, step 3 */ regs[STB6100_VCO] &= ~STB6100_VCO_OCK; /* VCO fast search */ - if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0) + rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]); + if (rc < 0) return rc; - msleep(10); /* wait for LO to lock */ + msleep(10); /* This is dangerous as another (related) thread may start */ /* wait for LO to lock */ + regs[STB6100_VCO] &= ~STB6100_VCO_OSCH; /* vco search disabled */ regs[STB6100_VCO] |= STB6100_VCO_OCK; /* search clock off */ - if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0) - return rc; - regs[STB6100_FCCK] &= ~STB6100_FCCK_FCCK; /* LPF BW clock disabled */ - stb6100_normalise_regs(regs); - if ((rc = stb6100_write_reg_range(state, ®s[1], 1, STB6100_NUMREGS - 3)) < 0) + rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]); + if (rc < 0) return rc; - msleep(100); + rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d); + if (rc < 0) + return rc; /* Stop LPF calibration */ + msleep(10); /* This is dangerous as another (related) thread may start */ + /* wait for stabilisation, (should not be necessary) */ return 0; } @@ -433,8 +494,8 @@ static int stb6100_init(struct dvb_frontend *fe) state->bandwidth = status->bandwidth * 1000; /* Hz */ state->reference = status->refclock / 1000; /* kHz */ - /* Set default bandwidth. */ - return stb6100_set_bandwidth(fe, state->bandwidth); + /* Set default bandwidth. Modified, PN 13-May-10 */ + return 0; } static int stb6100_get_state(struct dvb_frontend *fe,