From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 9 Dec 2015 11:50:05 +0000 (+0100)
Subject: microblaze: Enable uart16550 DM by default
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f0e353ce5538367aa4c61a60702723f32e7c5cfb;p=project%2Fbcm63xx%2Fu-boot.git

microblaze: Enable uart16550 DM by default

Microblaze is uses uartlite or uart16550 as console drivers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index dc4ac0558c..0947c46e4e 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -10,4 +10,5 @@ CONFIG_CMD_GPIO=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_EMBED=y
+CONFIG_SYS_NS16550=y
 CONFIG_XILINX_UARTLITE=y
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 6e3c80b143..19d5506f4e 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -37,19 +37,6 @@
 # define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-#if XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550_SERIAL
-# if defined(__MICROBLAZEEL__)
-#  define CONFIG_SYS_NS16550_REG_SIZE	-4
-# else
-#  define CONFIG_SYS_NS16550_REG_SIZE	4
-# endif
-# define CONFIG_CONS_INDEX		1
-# define CONFIG_SYS_NS16550_COM1 \
-		((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
-# define CONFIG_SYS_NS16550_CLK	XILINX_UART16550_CLOCK_HZ
-#endif
-
 /* setting reset address */
 /*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/