From: Rafał Miłecki Date: Tue, 20 Jan 2015 08:04:27 +0000 (+0000) Subject: bcm53xx: use final (backported) patch fixing serial console X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f0d73a4381b1f3a6f8714bfd46a62a515b4f53b0;p=openwrt%2Fstaging%2Fluka.git bcm53xx: use final (backported) patch fixing serial console Signed-off-by: Rafał Miłecki SVN-Revision: 44059 --- diff --git a/target/linux/bcm53xx/patches-3.14/001-mtd-spi-nor.patch b/target/linux/bcm53xx/patches-3.14/001-mtd-spi-nor.patch index f14de337da..8b6ed43f98 100644 --- a/target/linux/bcm53xx/patches-3.14/001-mtd-spi-nor.patch +++ b/target/linux/bcm53xx/patches-3.14/001-mtd-spi-nor.patch @@ -3,7 +3,7 @@ This patch does not contain any further code not in this mainline kernel. --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig -@@ -371,6 +371,8 @@ source "drivers/mtd/onenand/Kconfig" +@@ -366,6 +366,8 @@ source "drivers/mtd/onenand/Kconfig" source "drivers/mtd/lpddr/Kconfig" @@ -14,7 +14,7 @@ This patch does not contain any further code not in this mainline kernel. endif # MTD --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile -@@ -39,4 +39,5 @@ inftl-objs := inftlcore.o inftlmount.o +@@ -35,4 +35,5 @@ inftl-objs := inftlcore.o inftlmount.o obj-y += chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/ diff --git a/target/linux/bcm53xx/patches-3.14/044-0-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.14/044-0-ARM-BCM5301X-fix-early-serial-console.patch new file mode 100644 index 0000000000..4ead8c45a1 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.14/044-0-ARM-BCM5301X-fix-early-serial-console.patch @@ -0,0 +1,39 @@ +From 140bd60383309e82b5cae3294a907c11a0a12b90 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 14 Sep 2014 21:43:40 +0200 +Subject: [PATCH] ARM: BCM5301X: fix early serial console + +This device actually has a 8250 serial with a shift of 0. +Tested this on a BCM4708. + +Signed-off-by: Hauke Mehrtens +Signed-off-by: Arnd Bergmann +--- + arch/arm/Kconfig.debug | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug +index 1c4889d..a528843 100644 +--- a/arch/arm/Kconfig.debug ++++ b/arch/arm/Kconfig.debug +@@ -109,7 +109,7 @@ choice + config DEBUG_BCM_5301X + bool "Kernel low-level debugging on BCM5301X UART1" + depends on ARCH_BCM_5301X +- select DEBUG_UART_PL01X ++ select DEBUG_UART_8250 + + config DEBUG_BCM_KONA_UART + bool "Kernel low-level debugging messages via BCM KONA UART" +@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT + config DEBUG_UART_8250_SHIFT + int "Register offset shift for the 8250 debug UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 +- default 0 if FOOTBRIDGE || ARCH_IOP32X ++ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X + default 2 + + config DEBUG_UART_8250_WORD +-- +1.8.4.5 + diff --git a/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch b/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch index daa641f20f..f0aafa9164 100644 --- a/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch +++ b/target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch @@ -18,8 +18,8 @@ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 91bd5bd..ff4a5ae 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb +@@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm1135 + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-luxul-xwc-1000.dtb \ diff --git a/target/linux/bcm53xx/patches-3.14/301-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.14/301-ARM-BCM5301X-fix-early-serial-console.patch deleted file mode 100644 index 5c6f6ec519..0000000000 --- a/target/linux/bcm53xx/patches-3.14/301-ARM-BCM5301X-fix-early-serial-console.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 14 Sep 2014 21:02:35 +0200 -Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console - -This device actually has a 8250 serial with a shift of 0. -Tested this on a BCM4708. - -Signed-off-by: Hauke Mehrtens ---- - arch/arm/Kconfig.debug | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/Kconfig.debug -+++ b/arch/arm/Kconfig.debug -@@ -109,7 +109,7 @@ choice - config DEBUG_BCM_5301X - bool "Kernel low-level debugging on BCM5301X UART1" - depends on ARCH_BCM_5301X -- select DEBUG_UART_PL01X -+ select DEBUG_UART_8250 - - config DEBUG_BCM_KONA_UART - bool "Kernel low-level debugging messages via BCM KONA UART" -@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT - config DEBUG_UART_8250_SHIFT - int "Register offset shift for the 8250 debug UART" - depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 -- default 0 if FOOTBRIDGE || ARCH_IOP32X -+ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X - default 2 - - config DEBUG_UART_8250_WORD diff --git a/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch new file mode 100644 index 0000000000..517b2e76e4 --- /dev/null +++ b/target/linux/bcm53xx/patches-3.18/043-ARM-BCM5301X-fix-early-serial-console.patch @@ -0,0 +1,39 @@ +From 140bd60383309e82b5cae3294a907c11a0a12b90 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 14 Sep 2014 21:43:40 +0200 +Subject: [PATCH] ARM: BCM5301X: fix early serial console + +This device actually has a 8250 serial with a shift of 0. +Tested this on a BCM4708. + +Signed-off-by: Hauke Mehrtens +Signed-off-by: Arnd Bergmann +--- + arch/arm/Kconfig.debug | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug +index 1c4889d..a528843 100644 +--- a/arch/arm/Kconfig.debug ++++ b/arch/arm/Kconfig.debug +@@ -113,7 +113,7 @@ choice + config DEBUG_BCM_5301X + bool "Kernel low-level debugging on BCM5301X UART1" + depends on ARCH_BCM_5301X +- select DEBUG_UART_PL01X ++ select DEBUG_UART_8250 + + config DEBUG_BCM_KONA_UART + bool "Kernel low-level debugging messages via BCM KONA UART" +@@ -1249,7 +1249,7 @@ config DEBUG_UART_VIRT + config DEBUG_UART_8250_SHIFT + int "Register offset shift for the 8250 debug UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 +- default 0 if FOOTBRIDGE || ARCH_IOP32X ++ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X + default 2 + + config DEBUG_UART_8250_WORD +-- +1.8.4.5 + diff --git a/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch b/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch index daa641f20f..c9cf71b70f 100644 --- a/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch +++ b/target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch @@ -18,8 +18,8 @@ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 91bd5bd..ff4a5ae 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb - dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb +@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amar + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-buffalo-wzr-1750dhp.dtb \ + bcm4708-luxul-xwc-1000.dtb \ diff --git a/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch b/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch index 5c460f1ad9..d9bbc3972c 100644 --- a/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch +++ b/target/linux/bcm53xx/patches-3.18/110-firmware-backport-NVRAM-driver.patch @@ -21,7 +21,7 @@ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4733d32..ab18030 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -2286,6 +2286,8 @@ source "net/Kconfig" +@@ -2166,6 +2166,8 @@ source "net/Kconfig" source "drivers/Kconfig" diff --git a/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-fix-early-serial-console.patch deleted file mode 100644 index 4d100dae33..0000000000 --- a/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-fix-early-serial-console.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 14 Sep 2014 21:02:35 +0200 -Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console - -This device actually has a 8250 serial with a shift of 0. -Tested this on a BCM4708. - -Signed-off-by: Hauke Mehrtens ---- - arch/arm/Kconfig.debug | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/arm/Kconfig.debug -+++ b/arch/arm/Kconfig.debug -@@ -113,7 +113,7 @@ choice - config DEBUG_BCM_5301X - bool "Kernel low-level debugging on BCM5301X UART1" - depends on ARCH_BCM_5301X -- select DEBUG_UART_PL01X -+ select DEBUG_UART_8250 - - config DEBUG_BCM_KONA_UART - bool "Kernel low-level debugging messages via BCM KONA UART" -@@ -1249,7 +1249,7 @@ config DEBUG_UART_VIRT - config DEBUG_UART_8250_SHIFT - int "Register offset shift for the 8250 debug UART" - depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 -- default 0 if FOOTBRIDGE || ARCH_IOP32X -+ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X - default 2 - - config DEBUG_UART_8250_WORD