From: Siarhei Siamashka Date: Thu, 25 Dec 2014 00:34:47 +0000 (+0200) Subject: sunxi: Fix CONFIG_UART0_PORT_F build and add it to menuconfig X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f0ce28e9eda9cb1430c51df1840ce8cd483f75c3;p=project%2Fbcm63xx%2Fu-boot.git sunxi: Fix CONFIG_UART0_PORT_F build and add it to menuconfig The CONFIG_UART0_PORT_F option has been supported since http://git.denx.de/?p=u-boot.git;a=commit;h=ff2b47f6a9cc1025 This option is primarily useful only for low level u-boot debugging on tablets, where normal UART0 is difficult to access and requires device disassembly and/or soldering. This patch now allows it to be selected from menuconfig. A dependency on SPL_FEL is added because u-boot does not support booting from NAND yet and also booting from SD card is impossible when a MicroSD breakout board is plugged into the SD slot. Additionally a compilation problem is fixed: common/spl/built-in.o: In function `spl_mmc_load_image': /tmp/u-boot-sunxi/common/spl/spl_mmc.c:94: undefined reference to `mmc_initialize' /tmp/u-boot-sunxi/common/spl/spl_mmc.c:96: undefined reference to `find_mmc_device' /tmp/u-boot-sunxi/common/spl/spl_mmc.c:104: undefined reference to `mmc_init' scripts/Makefile.spl:206: recipe for target 'spl/u-boot-spl' failed Signed-off-by: Siarhei Siamashka Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 9bb593aed0..40adcfb401 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -177,6 +177,18 @@ config SPL_FEL depends on SPL default n +config UART0_PORT_F + bool "UART0 on MicroSD breakout board" + depends on SPL_FEL + default n + ---help--- + Repurpose the SD card slot for getting access to the UART0 serial + console. Primarily useful only for low level u-boot debugging on + tablets, where normal UART0 is difficult to access and requires + device disassembly and/or soldering. As the SD card can't be used + at the same time, the system can be only booted in the FEL mode. + Only enable this if you really know what you are doing. + config FDTFILE string "Default fdtfile env setting for this board" diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 3f890b2fb0..f7e87a2c37 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -160,7 +160,10 @@ #define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ #define CONFIG_SPL_LIBDISK_SUPPORT + +#if !defined(CONFIG_UART0_PORT_F) #define CONFIG_SPL_MMC_SUPPORT +#endif #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" diff --git a/scripts/multiconfig.sh b/scripts/multiconfig.sh index 70f3a5df6f..366e8faaa6 100755 --- a/scripts/multiconfig.sh +++ b/scripts/multiconfig.sh @@ -168,7 +168,7 @@ do_board_felconfig () { echo "$progname: Cannot felconfig a non-sunxi or non-SPL platform" >&2 exit 1 fi - sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y/g' \ + sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y\nCONFIG_UART0_PORT_F=n/g' \ .config spl/.config }