From: Oskari Lemmela Date: Wed, 24 Feb 2021 19:10:38 +0000 (+0200) Subject: mediatek: mt7622-bananapi-bpi-r64-rootdisk rebase to upstream dts X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f0818706eb599dae33232e6e9489695223a9880c;p=openwrt%2Fstaging%2Flinusw.git mediatek: mt7622-bananapi-bpi-r64-rootdisk rebase to upstream dts simplify maintaining mt7622-bananapi-bpi-r64-rootdisk.dts by storing only differences between upstream dts Signed-off-by: Oskari Lemmela --- diff --git a/target/linux/mediatek/dts/mt7622-bananapi-bpi-r64-rootdisk.dts b/target/linux/mediatek/dts/mt7622-bananapi-bpi-r64-rootdisk.dts index 428777e3f7..911b3dd5b4 100644 --- a/target/linux/mediatek/dts/mt7622-bananapi-bpi-r64-rootdisk.dts +++ b/target/linux/mediatek/dts/mt7622-bananapi-bpi-r64-rootdisk.dts @@ -5,586 +5,14 @@ */ /dts-v1/; -#include -#include - -#include "mt7622.dtsi" -#include "mt6380.dtsi" +#include "mt7622-bananapi-bpi-r64.dts" / { model = "Bananapi BPI-R64"; compatible = "bananapi,bpi-r64-rootdisk", "mediatek,mt7622"; - aliases { - serial0 = &uart0; - }; - chosen { stdout-path = "serial0:115200n8"; bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512 root=/dev/mmcblk0p7 rootfstype=squashfs,f2fs"; }; - - cpus { - cpu@0 { - proc-supply = <&mt6380_vcpu_reg>; - sram-supply = <&mt6380_vm_reg>; - }; - - cpu@1 { - proc-supply = <&mt6380_vcpu_reg>; - sram-supply = <&mt6380_vm_reg>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - factory { - label = "factory"; - linux,code = ; - gpios = <&pio 0 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "wps"; - linux,code = ; - gpios = <&pio 102 GPIO_ACTIVE_HIGH>; - }; - }; - - leds { - compatible = "gpio-leds"; - - green { - label = "bpi-r64:pio:green"; - gpios = <&pio 89 GPIO_ACTIVE_HIGH>; - }; - - red { - label = "bpi-r64:pio:red"; - gpios = <&pio 88 GPIO_ACTIVE_HIGH>; - }; - }; - - memory { - reg = <0 0x40000000 0 0x40000000>; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_5v: regulator-5v { - compatible = "regulator-fixed"; - regulator-name = "fixed-5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - }; -}; - -&bch { - status = "disabled"; -}; - -&btif { - status = "okay"; -}; - -&cir { - pinctrl-names = "default"; - pinctrl-0 = <&irrx_pins>; - status = "okay"; -}; - -ð { - status = "okay"; - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "2500base-x"; - - fixed-link { - speed = <2500>; - full-duplex; - pause; - }; - }; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - - mdio: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - - switch@1f { - compatible = "mediatek,mt7531"; - reg = <0x1f>; - reset-gpios = <&pio 54 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - wan: port@0 { - reg = <0>; - label = "wan"; - }; - - port@1 { - reg = <1>; - label = "lan0"; - }; - - port@2 { - reg = <2>; - label = "lan1"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - }; - - port@4 { - reg = <4>; - label = "lan3"; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "2500base-x"; - - fixed-link { - speed = <2500>; - full-duplex; - pause; - }; - }; - }; - }; - - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&emmc_pins_default>; - pinctrl-1 = <&emmc_pins_uhs>; - status = "okay"; - bus-width = <8>; - max-frequency = <50000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; - non-removable; -}; - -&mmc1 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&sd0_pins_default>; - pinctrl-1 = <&sd0_pins_uhs>; - status = "okay"; - bus-width = <4>; - max-frequency = <50000000>; - cap-sd-highspeed; - r_smpl = <1>; - cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_3p3v>; - assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; -}; - -&nandc { - pinctrl-names = "default"; - pinctrl-0 = <¶llel_nand_pins>; - status = "disabled"; -}; - -&nor_flash { - pinctrl-names = "default"; - pinctrl-0 = <&spi_nor_pins>; - status = "disabled"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - }; -}; - -&pcie0 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_pins>; - status = "okay"; -}; - -&pcie1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_pins>; - status = "okay"; -}; - -&pio { - /* Attention: GPIO 90 is used to switch between PCIe@1,0 and - * SATA functions. i.e. output-high: PCIe, output-low: SATA - */ - asm_sel { - gpio-hog; - gpios = <90 GPIO_ACTIVE_HIGH>; - output-high; - }; - - /* eMMC is shared pin with parallel NAND */ - emmc_pins_default: emmc-pins-default { - mux { - function = "emmc", "emmc_rst"; - groups = "emmc"; - }; - - /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", - * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4, - * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively - */ - conf-cmd-dat { - pins = "NDL0", "NDL1", "NDL2", - "NDL3", "NDL4", "NDL5", - "NDL6", "NDL7", "NRB"; - input-enable; - bias-pull-up; - }; - - conf-clk { - pins = "NCLE"; - bias-pull-down; - }; - }; - - emmc_pins_uhs: emmc-pins-uhs { - mux { - function = "emmc"; - groups = "emmc"; - }; - - conf-cmd-dat { - pins = "NDL0", "NDL1", "NDL2", - "NDL3", "NDL4", "NDL5", - "NDL6", "NDL7", "NRB"; - input-enable; - drive-strength = <4>; - bias-pull-up; - }; - - conf-clk { - pins = "NCLE"; - drive-strength = <4>; - bias-pull-down; - }; - }; - - eth_pins: eth-pins { - mux { - function = "eth"; - groups = "mdc_mdio", "rgmii_via_gmac2"; - }; - }; - - i2c1_pins: i2c1-pins { - mux { - function = "i2c"; - groups = "i2c1_0"; - }; - }; - - i2c2_pins: i2c2-pins { - mux { - function = "i2c"; - groups = "i2c2_0"; - }; - }; - - i2s1_pins: i2s1-pins { - mux { - function = "i2s"; - groups = "i2s_out_mclk_bclk_ws", - "i2s1_in_data", - "i2s1_out_data"; - }; - - conf { - pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", - "I2S_WS", "I2S_MCLK"; - drive-strength = <12>; - bias-pull-down; - }; - }; - - irrx_pins: irrx-pins { - mux { - function = "ir"; - groups = "ir_1_rx"; - }; - }; - - irtx_pins: irtx-pins { - mux { - function = "ir"; - groups = "ir_1_tx"; - }; - }; - - /* Parallel nand is shared pin with eMMC */ - parallel_nand_pins: parallel-nand-pins { - mux { - function = "flash"; - groups = "par_nand"; - }; - }; - - pcie0_pins: pcie0-pins { - mux { - function = "pcie"; - groups = "pcie0_pad_perst", - "pcie0_1_waken", - "pcie0_1_clkreq"; - }; - }; - - pcie1_pins: pcie1-pins { - mux { - function = "pcie"; - groups = "pcie1_pad_perst", - "pcie1_0_waken", - "pcie1_0_clkreq"; - }; - }; - - pmic_bus_pins: pmic-bus-pins { - mux { - function = "pmic"; - groups = "pmic_bus"; - }; - }; - - pwm7_pins: pwm1-2-pins { - mux { - function = "pwm"; - groups = "pwm_ch7_2"; - }; - }; - - wled_pins: wled-pins { - mux { - function = "led"; - groups = "wled"; - }; - }; - - sd0_pins_default: sd0-pins-default { - mux { - function = "sd"; - groups = "sd_0"; - }; - - /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN", - * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1, - * DAT2, DAT3, CMD, CLK for SD respectively. - */ - conf-cmd-data { - pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", - "I2S2_IN","I2S4_OUT"; - input-enable; - drive-strength = <8>; - bias-pull-up; - }; - conf-clk { - pins = "I2S3_OUT"; - drive-strength = <12>; - bias-pull-down; - }; - conf-cd { - pins = "TXD3"; - bias-pull-up; - }; - }; - - sd0_pins_uhs: sd0-pins-uhs { - mux { - function = "sd"; - groups = "sd_0"; - }; - - conf-cmd-data { - pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", - "I2S2_IN","I2S4_OUT"; - input-enable; - bias-pull-up; - }; - - conf-clk { - pins = "I2S3_OUT"; - bias-pull-down; - }; - }; - - /* Serial NAND is shared pin with SPI-NOR */ - serial_nand_pins: serial-nand-pins { - mux { - function = "flash"; - groups = "snfi"; - }; - }; - - spic0_pins: spic0-pins { - mux { - function = "spi"; - groups = "spic0_0"; - }; - }; - - spic1_pins: spic1-pins { - mux { - function = "spi"; - groups = "spic1_0"; - }; - }; - - /* SPI-NOR is shared pin with serial NAND */ - spi_nor_pins: spi-nor-pins { - mux { - function = "flash"; - groups = "spi_nor"; - }; - }; - - /* serial NAND is shared pin with SPI-NOR */ - serial_nand_pins: serial-nand-pins { - mux { - function = "flash"; - groups = "snfi"; - }; - }; - - uart0_pins: uart0-pins { - mux { - function = "uart"; - groups = "uart0_0_tx_rx" ; - }; - }; - - uart2_pins: uart2-pins { - mux { - function = "uart"; - groups = "uart2_1_tx_rx" ; - }; - }; - - watchdog_pins: watchdog-pins { - mux { - function = "watchdog"; - groups = "watchdog"; - }; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm7_pins>; - status = "okay"; -}; - -&pwrap { - pinctrl-names = "default"; - pinctrl-0 = <&pmic_bus_pins>; - - status = "okay"; -}; - -&sata { - status = "disable"; -}; - -&sata_phy { - status = "disable"; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spic0_pins>; - status = "okay"; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spic1_pins>; - status = "okay"; -}; - -&ssusb { - vusb33-supply = <®_3p3v>; - vbus-supply = <®_5v>; - status = "okay"; -}; - -&u3phy { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - status = "okay"; -}; - -&watchdog { - pinctrl-names = "default"; - pinctrl-0 = <&watchdog_pins>; - status = "okay"; };