From: Peter Tyser Date: Fri, 24 Apr 2009 20:34:09 +0000 (-0500) Subject: tsi108_i2c: Add i2c_init() stub function X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f0722ee762e8dada9d7f74ac2745e043f83aae85;p=project%2Fbcm63xx%2Fu-boot.git tsi108_i2c: Add i2c_init() stub function Add the i2c_init() function so that the tsi108_i2c.c driver fits U-Boot's standard I2C API which is utilized by cmd_i2c.c Signed-off-by: Peter Tyser --- diff --git a/drivers/i2c/tsi108_i2c.c b/drivers/i2c/tsi108_i2c.c index fda822c52d..3829ef98f6 100644 --- a/drivers/i2c/tsi108_i2c.c +++ b/drivers/i2c/tsi108_i2c.c @@ -41,6 +41,15 @@ /* All functions assume that Tsi108 I2C block is the only master on the bus */ /* I2C read helper function */ +void i2c_init(int speed, int slaveaddr) +{ + /* + * The TSI108 has a fixed I2C clock rate and doesn't support slave + * operation. This function only exists as a stub to fit into the + * U-Boot I2C API. + */ +} + static int i2c_read_byte ( uint i2c_chan, /* I2C channel number: 0 - main, 1 - SDC SPD */ uchar chip_addr,/* I2C device address on the bus */