From: John Crispin Date: Fri, 17 Jul 2015 12:51:08 +0000 (+0000) Subject: ramips: add support for Planex MZK-DP150N X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eff79253f2fd3b4e7f1000b09e1fedf8f52d7af4;p=openwrt%2Fstaging%2F981213.git ramips: add support for Planex MZK-DP150N This patch add support for Planex MZK-DP150N. a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by: YuheiOKAWA SVN-Revision: 46405 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index fe3a79d14d..0672a2272b 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -265,6 +265,9 @@ case $board in zte-q7) set_wifi_led "zte:blue:status" ;; + mzk-dp150n) + ucidef_set_led_default "power" "power" "mzkdp150n:green:power" "1" + ;; esac board_config_flush diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 9fb3535149..f896afafee 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -261,6 +261,13 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t" ucidef_add_switch_vlan "switch0" "2" "0 5t" ;; + + mzk-dp150n) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 4 6t" + ;; + *) RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"` if [ -n "${RT3X5X}" ]; then diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 46e519aa42..319763e645 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -249,6 +249,9 @@ get_status_led() { zte-q7) status_led="zte:red:status" ;; + mzk-dp150n) + status_led="mzkdp150n:green:power" + ;; esac } diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 3d40ab9b63..d7fd5f91aa 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -421,6 +421,9 @@ ramips_board_detect() { *"Mediatek MT7628AN evaluation board") name="mt7628" ;; + *"Planex MZK-DP150N") + name="mzk-dp150n" + ;; *) name="generic" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 8f45a84612..04af3225be 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -71,6 +71,7 @@ platform_check_image() { mpr-a2 | \ mr-102n | \ mzk-w300nh2 | \ + mzk-dp150n | \ nbg-419n | \ nw718 | \ omni-emb | \ diff --git a/target/linux/ramips/dts/MZK-DP150N.dts b/target/linux/ramips/dts/MZK-DP150N.dts new file mode 100644 index 0000000000..ae986f76c8 --- /dev/null +++ b/target/linux/ramips/dts/MZK-DP150N.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "MZK-DP150N", "ralink,rt5350-soc"; + model = "Planex MZK-DP150N"; + + palmbus@10000000 { + gpio1: gpio@660 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fl064k"; + reg = <0>; + linux,modalias = "m25p80", "s25fl064k"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + spidev@1 { + compatible = "linux,spidev"; + spi-max-frequency = <10000000>; + reg = <1>; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag", "uartf", "led"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x17>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + ralink,led-polarity = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "mzkdp150n:green:power"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 2fe5fdd1ab..b71d935a93 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -609,6 +609,8 @@ Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U) Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN) +Image/Build/Profile/MZK-DP150N=$(call BuildFirmware/Default4M/$(1),$(1),mzk-dp150n,MZK-DP150N) + buffalo_whrg300n_mtd_size=3801088 define BuildFirmware/WHRG300N/squashfs $(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N) @@ -772,6 +774,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/X5,$(1)) $(call Image/Build/Profile/X8,$(1)) $(call Image/Build/Profile/XDXRN502J,$(1)) + $(call Image/Build/Profile/MZK-DP150N,$(1)) endef endif diff --git a/target/linux/ramips/rt305x/profiles/planex.mk b/target/linux/ramips/rt305x/profiles/planex.mk new file mode 100644 index 0000000000..d0d9ac949c --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/planex.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2014 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/MZK-DP150N + NAME:=Planex MZK-DP150N + PACKAGES:= kmod-spi-dev +endef + +define Profile/MZK-DP150N/Description + Package set optimized for the Planex MZK-DP150N. +endef + +$(eval $(call Profile,MZK-DP150N))