From: Linus Walleij Date: Mon, 19 Jun 2023 06:36:16 +0000 (+0200) Subject: bcm53xx: Add support for D-Link DIR-890L X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ef76b6ff3e8f93a719d9c88fb2ae1ee6d641b42e;p=openwrt%2Fstaging%2Fjow.git bcm53xx: Add support for D-Link DIR-890L The DIR-890L is very similar to DIR-885L, but has both USB2 and USB3. The signature for the wrgac36 board was copied from DD-Wrt. The DIR-890L bootstrap will only load the first 2 MB after the SEAMA header in the NAND flash, uncompress it with LZMA and execute it. Since the compressed kernel will not fit in 2 MB we have a problem. Solve this by putting a LZMA compressed U-Boot into the first 128 KB of the flash followed by the kernel. The bootstrap will then uncompress and execute U-Boot and then we let U-Boot read the kernel from flash and execute it. Signed-off-by: Linus Walleij --- diff --git a/target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc index 89ce8970d7..c39625b865 100644 --- a/target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc +++ b/target/linux/bcm53xx/base-files/etc/uci-defaults/09_fix_crc @@ -13,7 +13,8 @@ fixseama() { } case "$board" in -dlink,dir-885l) +dlink,dir-885l | \ +dlink,dir-890l) fixseama ;; *) diff --git a/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh index d9dc497cda..0697d3dc80 100644 --- a/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh @@ -37,6 +37,7 @@ platform_expected_image() { case "$machine" in "dlink,dir-885l") echo "seamaseal wrgac42_dlink.2015_dir885l"; return;; + "dlink,dir-890l") echo "seamaseal wrgac36_dlink.2013gui_dir890"; return;; "luxul,abr-4500-v1") echo "lxl ABR-4500"; return;; "luxul,xap-810-v1") echo "lxl XAP-810"; return;; "luxul,xap-1410-v1") echo "lxl XAP-1410"; return;; diff --git a/target/linux/bcm53xx/image/Makefile b/target/linux/bcm53xx/image/Makefile index 5158b432b3..39b7efbef7 100644 --- a/target/linux/bcm53xx/image/Makefile +++ b/target/linux/bcm53xx/image/Makefile @@ -88,6 +88,12 @@ define Build/luxul-lxl mv $@.new $@ endef +# Outputs a lzma compressed U-Boot that start at 0x00008000 +# just like the D-Link boot loaders expect +define Build/dlink-uboot-bin + $(STAGING_DIR_HOST)/bin/lzma e $(STAGING_DIR_IMAGE)/$(DEVICE_NAME)-u-boot.bin -d16 $@ +endef + define Build/seama-nand # Seama entity $(STAGING_DIR_HOST)/bin/oseama \ @@ -274,6 +280,21 @@ define Device/dlink_dir-885l endef TARGET_DEVICES += dlink_dir-885l +define Device/dlink_dir-890l + DEVICE_VENDOR := D-Link + DEVICE_MODEL := DIR-890L + DEVICE_PACKAGES := $(BRCMFMAC_43602A1) $(USB2_PACKAGES) $(USB3_PACKAGES) + # Layout: U-boot (128kb max) followed by kernel and appended DTB. + # This is done because the boot loader will only read the first 2 MB + # from the flash and decompress the LZMA it finds there after the + # SEAMA header. Since the compressed kernel will not fit in 2 MB, + # we put U-Boot there and let U-Boot read and execute the kernel. + KERNEL := dlink-uboot-bin | pad-to 128k | append-kernel | append-dtb + $(Device/dlink) + SIGNATURE := wrgac36_dlink.2013gui_dir890 +endef +TARGET_DEVICES += dlink_dir-890l + define Device/dlink_dwl-8610ap DEVICE_VENDOR := D-Link DEVICE_MODEL := DWL-8610AP