From: John Thomson Date: Tue, 28 Sep 2021 10:51:56 +0000 (+1000) Subject: kernel: cut broken SPI_NOR 4K eraseblock LIMIT patch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ef69ab7a35a2ef5257aa2f718875b24856947c34;p=openwrt%2Fstaging%2Faparcar.git kernel: cut broken SPI_NOR 4K eraseblock LIMIT patch Since 4e0c54bc5bc8 ("kernel: add support for kernel 5.4"), the spi-nor limit 4k erasesize to spi-nor chips below a configured size patch has not functioned as intended. For uniform erasesize SPI-NOR devices, both nor->erase_opcode & mtd->erasesize are used in erase operations. These are set before, and not modified by, this CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT patch. Thus, an SPI-NOR device with CONFIG_MTD_SPI_NOR_USE_4K_SECTORS will always use 4k erasesize (where the device supports it). If this patch was fixed to function as intended, there would be cases where devices change from a 4K to a 64K erasesize. Signed-off-by: John Thomson --- diff --git a/target/linux/generic/config-5.10 b/target/linux/generic/config-5.10 index a08b8c5686..2758479519 100644 --- a/target/linux/generic/config-5.10 +++ b/target/linux/generic/config-5.10 @@ -3671,7 +3671,6 @@ CONFIG_MTD_ROOTFS_ROOT_DEV=y # CONFIG_MTD_SPI_NAND is not set # CONFIG_MTD_SPI_NOR is not set # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096 # CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE is not set CONFIG_MTD_SPLIT=y # CONFIG_MTD_SPLIT_BCM63XX_FW is not set diff --git a/target/linux/generic/config-5.15 b/target/linux/generic/config-5.15 index 15e69f8d01..bd21e99356 100644 --- a/target/linux/generic/config-5.15 +++ b/target/linux/generic/config-5.15 @@ -3814,7 +3814,6 @@ CONFIG_MTD_ROOTFS_ROOT_DEV=y CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y # CONFIG_MTD_SPI_NOR_SWP_KEEP is not set # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096 # CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE is not set CONFIG_MTD_SPLIT=y # CONFIG_MTD_SPLIT_BCM63XX_FW is not set diff --git a/target/linux/generic/pending-5.10/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch b/target/linux/generic/pending-5.10/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch deleted file mode 100644 index b79c6bb3de..0000000000 --- a/target/linux/generic/pending-5.10/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch +++ /dev/null @@ -1,71 +0,0 @@ -From: Felix Fietkau -Date: Sat, 4 Nov 2017 07:40:23 +0100 -Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on - flash size - -Some devices need 4K sectors to be able to deal with small flash chips. -For instance, w25x05 is 64 KiB in size, and without 4K sectors, the -entire chip is just one erase block. -On bigger flash chip sizes, using 4K sectors can significantly slow down -many operations, including using a writable filesystem. There are several -platforms where it makes sense to use a single kernel on both kinds of -devices. - -To support this properly, allow configuring an upper flash chip size -limit for 4K sectors support. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/mtd/spi-nor/Kconfig -+++ b/drivers/mtd/spi-nor/Kconfig -@@ -34,6 +34,17 @@ config MTD_SPI_NOR_USE_4K_SECTORS - Please note that some tools/drivers/filesystems may not work with - 4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum). - -+config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT -+ int "Maximum flash chip size to use 4K sectors on (in KiB)" -+ depends on MTD_SPI_NOR_USE_4K_SECTORS -+ default "4096" -+ help -+ There are many flash chips that support 4K sectors, but are so large -+ that using them significantly slows down writing large amounts of -+ data or using a writable filesystem. -+ Any flash chip larger than the size specified in this option will -+ not use 4K sectors. -+ - source "drivers/mtd/spi-nor/controllers/Kconfig" - - endif # MTD_SPI_NOR ---- a/drivers/mtd/spi-nor/core.c -+++ b/drivers/mtd/spi-nor/core.c -@@ -2801,6 +2801,21 @@ static void spi_nor_info_init_params(str - */ - erase_mask = 0; - i = 0; -+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS -+ if ((info->flags & SECT_4K_PMC) && (params->size <= -+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) { -+ erase_mask |= BIT(i); -+ spi_nor_set_erase_type(&map->erase_type[i], 4096u, -+ SPINOR_OP_BE_4K_PMC); -+ i++; -+ } else if ((info->flags & SECT_4K) && (params->size <= -+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) { -+ erase_mask |= BIT(i); -+ spi_nor_set_erase_type(&map->erase_type[i], 4096u, -+ SPINOR_OP_BE_4K); -+ i++; -+ } -+#else - if (info->flags & SECT_4K_PMC) { - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], 4096u, -@@ -2812,6 +2827,7 @@ static void spi_nor_info_init_params(str - SPINOR_OP_BE_4K); - i++; - } -+#endif - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], info->sector_size, - SPINOR_OP_SE); diff --git a/target/linux/generic/pending-5.15/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch b/target/linux/generic/pending-5.15/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch deleted file mode 100644 index 1649a55c4f..0000000000 --- a/target/linux/generic/pending-5.15/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch +++ /dev/null @@ -1,71 +0,0 @@ -From: Felix Fietkau -Date: Sat, 4 Nov 2017 07:40:23 +0100 -Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on - flash size - -Some devices need 4K sectors to be able to deal with small flash chips. -For instance, w25x05 is 64 KiB in size, and without 4K sectors, the -entire chip is just one erase block. -On bigger flash chip sizes, using 4K sectors can significantly slow down -many operations, including using a writable filesystem. There are several -platforms where it makes sense to use a single kernel on both kinds of -devices. - -To support this properly, allow configuring an upper flash chip size -limit for 4K sectors support. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/mtd/spi-nor/Kconfig -+++ b/drivers/mtd/spi-nor/Kconfig -@@ -78,6 +78,17 @@ config MTD_SPI_NOR_SWP_KEEP - - endchoice - -+config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT -+ int "Maximum flash chip size to use 4K sectors on (in KiB)" -+ depends on MTD_SPI_NOR_USE_4K_SECTORS -+ default "4096" -+ help -+ There are many flash chips that support 4K sectors, but are so large -+ that using them significantly slows down writing large amounts of -+ data or using a writable filesystem. -+ Any flash chip larger than the size specified in this option will -+ not use 4K sectors. -+ - source "drivers/mtd/spi-nor/controllers/Kconfig" - - endif # MTD_SPI_NOR ---- a/drivers/mtd/spi-nor/core.c -+++ b/drivers/mtd/spi-nor/core.c -@@ -2640,6 +2640,21 @@ static void spi_nor_info_init_params(str - */ - erase_mask = 0; - i = 0; -+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS -+ if ((info->flags & SECT_4K_PMC) && (params->size <= -+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) { -+ erase_mask |= BIT(i); -+ spi_nor_set_erase_type(&map->erase_type[i], 4096u, -+ SPINOR_OP_BE_4K_PMC); -+ i++; -+ } else if ((info->flags & SECT_4K) && (params->size <= -+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) { -+ erase_mask |= BIT(i); -+ spi_nor_set_erase_type(&map->erase_type[i], 4096u, -+ SPINOR_OP_BE_4K); -+ i++; -+ } -+#else - if (info->flags & SECT_4K_PMC) { - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], 4096u, -@@ -2651,6 +2666,7 @@ static void spi_nor_info_init_params(str - SPINOR_OP_BE_4K); - i++; - } -+#endif - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], info->sector_size, - SPINOR_OP_SE); diff --git a/target/linux/layerscape/armv8_64b/config-5.10 b/target/linux/layerscape/armv8_64b/config-5.10 index 149884a5f6..0f46d1cde9 100644 --- a/target/linux/layerscape/armv8_64b/config-5.10 +++ b/target/linux/layerscape/armv8_64b/config-5.10 @@ -511,7 +511,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_FIT_FW=y CONFIG_MTD_SST25L=y diff --git a/target/linux/pistachio/config-5.10 b/target/linux/pistachio/config-5.10 index d62c5e9021..9e43b64b0b 100644 --- a/target/linux/pistachio/config-5.10 +++ b/target/linux/pistachio/config-5.10 @@ -178,7 +178,6 @@ CONFIG_MTD_NAND_CORE=y CONFIG_MTD_SPI_NAND=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y diff --git a/target/linux/ramips/mt7620/config-5.10 b/target/linux/ramips/mt7620/config-5.10 index bb7e50da5d..8fae1adc37 100644 --- a/target/linux/ramips/mt7620/config-5.10 +++ b/target/linux/ramips/mt7620/config-5.10 @@ -116,7 +116,6 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 CONFIG_MTD_SPLIT_JIMAGE_FW=y CONFIG_MTD_SPLIT_SEAMA_FW=y CONFIG_MTD_SPLIT_TPLINK_FW=y diff --git a/target/linux/ramips/rt305x/config-5.10 b/target/linux/ramips/rt305x/config-5.10 index c3c4cf6b0d..b41ddb22ac 100644 --- a/target/linux/ramips/rt305x/config-5.10 +++ b/target/linux/ramips/rt305x/config-5.10 @@ -106,7 +106,6 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 CONFIG_MTD_SPLIT_JIMAGE_FW=y CONFIG_MTD_SPLIT_SEAMA_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y diff --git a/target/linux/ramips/rt3883/config-5.10 b/target/linux/ramips/rt3883/config-5.10 index cb1db1ab82..b59ad98b60 100644 --- a/target/linux/ramips/rt3883/config-5.10 +++ b/target/linux/ramips/rt3883/config-5.10 @@ -104,7 +104,6 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 CONFIG_MTD_SPLIT_SEAMA_FW=y CONFIG_MTD_SPLIT_UIMAGE_FW=y CONFIG_NEED_DMA_MAP_STATE=y