From: Daniel Golle Date: Sun, 30 Apr 2023 16:41:22 +0000 (+0100) Subject: mediatek: add driver for built-in 2.5G Ethernet PHY X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ef2a831dabacfda6c36c79b8f963b5fdd9b2d080;p=openwrt%2Fstaging%2F981213.git mediatek: add driver for built-in 2.5G Ethernet PHY Add driver for the built-in 2.5G Ethernet PHY found in the MT7988 SoC. To function the PHY also needs firmware files which have not yet been published via linux-firmware. Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-2p5ge.c b/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-2p5ge.c new file mode 100644 index 0000000000..c12e6b8eb6 --- /dev/null +++ b/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-2p5ge.c @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include +#include +#include +#include +#include +#include +#include +#include + +#define MEDAITEK_2P5GE_PHY_DMB_FW "mediatek/mediatek-2p5ge-phy-dmb.bin" +#define MEDIATEK_2P5GE_PHY_PMB_FW "mediatek/mediatek-2p5ge-phy-pmb.bin" + +#define MD32_EN_CFG 0x18 +#define MD32_EN BIT(0) + +#define BASE100T_STATUS_EXTEND 0x10 +#define BASE1000T_STATUS_EXTEND 0x11 +#define EXTEND_CTRL_AND_STATUS 0x16 + +#define PHY_AUX_CTRL_STATUS 0x1d +#define PHY_AUX_DPX_MASK GENMASK(5, 5) +#define PHY_AUX_SPEED_MASK GENMASK(4, 2) + +/* Registers on MDIO_MMD_VEND1 */ +#define MTK_PHY_LINK_STATUS_MISC 0xa2 +#define MTK_PHY_FDX_ENABLE BIT(5) + +/* Registers on MDIO_MMD_VEND2 */ +#define MTK_PHY_LED0_ON_CTRL 0x24 +#define MTK_PHY_LED0_ON_LINK1000 BIT(0) +#define MTK_PHY_LED0_ON_LINK100 BIT(1) +#define MTK_PHY_LED0_ON_LINK10 BIT(2) +#define MTK_PHY_LED0_ON_LINK2500 BIT(7) +#define MTK_PHY_LED0_POLARITY BIT(14) + +#define MTK_PHY_LED1_ON_CTRL 0x26 +#define MTK_PHY_LED1_ON_FDX BIT(4) +#define MTK_PHY_LED1_ON_HDX BIT(5) +#define MTK_PHY_LED1_POLARITY BIT(14) + +enum { + PHY_AUX_SPD_10 = 0, + PHY_AUX_SPD_100, + PHY_AUX_SPD_1000, + PHY_AUX_SPD_2500, +}; + +static int mt798x_2p5ge_phy_config_init(struct phy_device *phydev) +{ + int ret; + int i; + const struct firmware *fw; + struct device *dev = &phydev->mdio.dev; + struct device_node *np; + void __iomem *dmb_addr; + void __iomem *pmb_addr; + void __iomem *mcucsr_base; + u16 reg; + struct pinctrl *pinctrl; + + np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw"); + if (!np) + return -ENOENT; + + dmb_addr = of_iomap(np, 0); + if (!dmb_addr) + return -ENOMEM; + pmb_addr = of_iomap(np, 1); + if (!pmb_addr) + return -ENOMEM; + mcucsr_base = of_iomap(np, 2); + if (!mcucsr_base) + return -ENOMEM; + + ret = request_firmware(&fw, MEDAITEK_2P5GE_PHY_DMB_FW, dev); + if (ret) { + dev_err(dev, "failed to load firmware: %s, ret: %d\n", + MEDAITEK_2P5GE_PHY_DMB_FW, ret); + return ret; + } + for (i = 0; i < fw->size - 1; i += 4) + writel(*((uint32_t *)(fw->data + i)), dmb_addr + i); + release_firmware(fw); + + ret = request_firmware(&fw, MEDIATEK_2P5GE_PHY_PMB_FW, dev); + if (ret) { + dev_err(dev, "failed to load firmware: %s, ret: %d\n", + MEDIATEK_2P5GE_PHY_PMB_FW, ret); + return ret; + } + for (i = 0; i < fw->size - 1; i += 4) + writel(*((uint32_t *)(fw->data + i)), pmb_addr + i); + release_firmware(fw); + + reg = readw(mcucsr_base + MD32_EN_CFG); + writew(reg | MD32_EN, mcucsr_base + MD32_EN_CFG); + dev_dbg(dev, "Firmware loading/trigger ok.\n"); + + /* Setup LED */ + phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL, + MTK_PHY_LED0_POLARITY); + + phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL, + MTK_PHY_LED0_ON_LINK10 | + MTK_PHY_LED0_ON_LINK100 | + MTK_PHY_LED0_ON_LINK1000 | + MTK_PHY_LED0_ON_LINK2500); + + phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL, + MTK_PHY_LED1_ON_FDX | MTK_PHY_LED1_ON_HDX); + + pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led"); + if (IS_ERR(pinctrl)) { + dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n"); + return PTR_ERR(pinctrl); + } + + return 0; +} + +static int mt798x_2p5ge_phy_config_aneg(struct phy_device *phydev) +{ + bool changed = false; + u32 adv; + int ret; + + if (phydev->autoneg == AUTONEG_DISABLE) { + /* Configure half duplex with genphy_setup_forced, + * because genphy_c45_pma_setup_forced does not support. + */ + return phydev->duplex != DUPLEX_FULL + ? genphy_setup_forced(phydev) + : genphy_c45_pma_setup_forced(phydev); + } + + ret = genphy_c45_an_config_aneg(phydev); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); + ret = phy_modify_changed(phydev, MII_CTRL1000, + ADVERTISE_1000FULL | ADVERTISE_1000HALF, + adv); + if (ret < 0) + return ret; + if (ret > 0) + changed = true; + + return genphy_c45_check_and_restart_aneg(phydev, changed); +} + +static int mt798x_2p5ge_phy_get_features(struct phy_device *phydev) +{ + int ret; + + ret = genphy_read_abilities(phydev); + if (ret) + return ret; + + /* We don't support HDX at MAC layer on mt798x. + * So mask phy's HDX capabilities, too. + */ + linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, + phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, + phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->supported); + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); + + return 0; +} + +static int mt798x_2p5ge_phy_read_status(struct phy_device *phydev) +{ + int ret; + + ret = genphy_update_link(phydev); + if (ret) + return ret; + + phydev->speed = SPEED_UNKNOWN; + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + if (!phydev->link) + return 0; + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { + ret = genphy_c45_read_lpa(phydev); + if (ret < 0) + return ret; + + /* Read the link partner's 1G advertisement */ + ret = phy_read(phydev, MII_STAT1000); + if (ret < 0) + return ret; + mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret); + } else if (phydev->autoneg == AUTONEG_DISABLE) { + linkmode_zero(phydev->lp_advertising); + } + + ret = phy_read(phydev, PHY_AUX_CTRL_STATUS); + if (ret < 0) + return ret; + + switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) { + case PHY_AUX_SPD_10: + phydev->speed = SPEED_10; + break; + case PHY_AUX_SPD_100: + phydev->speed = SPEED_100; + break; + case PHY_AUX_SPD_1000: + phydev->speed = SPEED_1000; + break; + case PHY_AUX_SPD_2500: + phydev->speed = SPEED_2500; + phydev->duplex = DUPLEX_FULL; /* 2.5G must be FDX */ + break; + } + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC); + if (ret < 0) + return ret; + + phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF; + + return 0; +} + +static struct phy_driver mtk_gephy_driver[] = { + { + PHY_ID_MATCH_EXACT(0x00339c11), + .name = "MediaTek MT798x 2.5GbE PHY", + .config_init = mt798x_2p5ge_phy_config_init, + .config_aneg = mt798x_2p5ge_phy_config_aneg, + .get_features = mt798x_2p5ge_phy_get_features, + .read_status = mt798x_2p5ge_phy_read_status, + }, +}; + +module_phy_driver(mtk_gephy_driver); + +static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = { + { PHY_ID_MATCH_VENDOR(0x00339c00) }, + { } +}; + +MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver"); +MODULE_AUTHOR("SkyLake Huang "); +MODULE_LICENSE("GPL"); + +MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl); +MODULE_FIRMWARE(MEDAITEK_2P5GE_PHY_DMB_FW); +MODULE_FIRMWARE(MEDIATEK_2P5GE_PHY_PMB_FW); diff --git a/target/linux/mediatek/filogic/config-5.15 b/target/linux/mediatek/filogic/config-5.15 index e6ab85fb5d..224d10d0e1 100644 --- a/target/linux/mediatek/filogic/config-5.15 +++ b/target/linux/mediatek/filogic/config-5.15 @@ -204,6 +204,7 @@ CONFIG_MAXLINEAR_GPHY=y CONFIG_MDIO_BUS=y CONFIG_MDIO_DEVICE=y CONFIG_MDIO_DEVRES=y +CONFIG_MEDIATEK_2P5G_PHY=y CONFIG_MEDIATEK_GE_PHY=y CONFIG_MEDIATEK_GE_SOC_PHY=y CONFIG_MEDIATEK_WATCHDOG=y diff --git a/target/linux/mediatek/mt7622/config-5.15 b/target/linux/mediatek/mt7622/config-5.15 index d584497ec1..79df71c990 100644 --- a/target/linux/mediatek/mt7622/config-5.15 +++ b/target/linux/mediatek/mt7622/config-5.15 @@ -225,6 +225,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_MDIO_BUS=y CONFIG_MDIO_DEVICE=y CONFIG_MDIO_DEVRES=y +# CONFIG_MEDIATEK_2P5G_PHY is not set CONFIG_MEDIATEK_GE_PHY=y # CONFIG_MEDIATEK_GE_SOC_PHY is not set CONFIG_MEDIATEK_WATCHDOG=y diff --git a/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch b/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch new file mode 100644 index 0000000000..a2a3bab632 --- /dev/null +++ b/target/linux/mediatek/patches-5.15/732-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch @@ -0,0 +1,39 @@ +From 128dc09b0af36772062142ce9e85b19c84ac789a Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Tue, 28 Feb 2023 17:53:37 +0000 +Subject: [PATCH] net: phy: add driver for MediaTek 2.5G PHY + +Signed-off-by: Daniel Golle +--- + drivers/net/phy/Kconfig | 7 ++ + drivers/net/phy/Makefile | 1 + + drivers/net/phy/mediatek-2p5ge.c | 220 +++++++++++++++++++++++++++++++ + 3 files changed, 226 insertions(+) + create mode 100644 drivers/net/phy/mediatek-2p5ge.c + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -304,6 +304,13 @@ config MEDIATEK_GE_SOC_PHY + present in the SoCs efuse and will dynamically calibrate VCM + (common-mode voltage) during startup. + ++config MEDIATEK_2P5G_PHY ++ tristate "MediaTek 2.5G Ethernet PHY" ++ depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST ++ default NET_MEDIATEK_SOC ++ help ++ Supports the MediaTek 2.5G Ethernet PHY. ++ + config MICREL_PHY + tristate "Micrel PHYs" + help +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -80,6 +80,7 @@ obj-$(CONFIG_MARVELL_10G_PHY) += marvell + obj-$(CONFIG_MARVELL_PHY) += marvell.o + obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o + obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o ++obj-$(CONFIG_MEDIATEK_2P5G_PHY) += mediatek-2p5ge.o + obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o + obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o + obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o