From: Ilya Lipnitskiy Date: Sun, 28 Feb 2021 00:00:24 +0000 (-0800) Subject: ramips: 5.10: rename patches to follow guide X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ef1e6520164e19451bc9cb8275cf293a699e1684;p=openwrt%2Fstaging%2Fneocturne.git ramips: 5.10: rename patches to follow guide Rename patches to follow the 3-digit classification from the OpenWrt Developer Guide. https://openwrt.org/docs/guide-developer/build-system/use-patches-with-buildsystem#naming_patches Signed-off-by: Ilya Lipnitskiy --- diff --git a/target/linux/ramips/patches-5.10/0003-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch b/target/linux/ramips/patches-5.10/0003-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch deleted file mode 100644 index 63429f49b0..0000000000 --- a/target/linux/ramips/patches-5.10/0003-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch +++ /dev/null @@ -1,45 +0,0 @@ -From: Tobias Wolf -Subject: [v2] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups - -Commit 67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new -issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is -not. As the prerequisite of custom memory map has been removed, this results -in the full memory range of 0x0 - 0x8000000 to be marked as reserved for this -platform. - -v2: Correctly compare that usermem is not null. - -This patch adds the originally intended prerequisite again. - -Signed-off-by: Tobias Wolf ---- - ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -287,6 +287,8 @@ static unsigned long __init init_initrd( - * Initialize the bootmem allocator. It also setup initrd related data - * if needed. - */ -+static int usermem __initdata; -+ - #if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA)) - - static void __init bootmem_init(void) -@@ -325,7 +327,7 @@ static void __init bootmem_init(void) - /* - * Reserve any memory between the start of RAM and PHYS_OFFSET - */ -- if (ramstart > PHYS_OFFSET) -+ if (usermem && ramstart > PHYS_OFFSET) - memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET); - - if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) { -@@ -386,8 +388,6 @@ static void __init bootmem_init(void) - - #endif /* CONFIG_SGI_IP27 */ - --static int usermem __initdata; -- - static int __init early_parse_mem(char *p) - { - phys_addr_t start, size; diff --git a/target/linux/ramips/patches-5.10/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-5.10/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch deleted file mode 100644 index 773c74f4e9..0000000000 --- a/target/linux/ramips/patches-5.10/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch +++ /dev/null @@ -1,82 +0,0 @@ -From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 14 Jul 2013 23:08:11 +0200 -Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k - irq - -Signed-off-by: John Crispin ---- - arch/mips/ralink/Kconfig | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -1,12 +1,17 @@ - # SPDX-License-Identifier: GPL-2.0 - if RALINK - -+config CEVT_SYSTICK_QUIRK -+ bool -+ default n -+ - config CLKEVT_RT3352 - bool - depends on SOC_RT305X || SOC_MT7620 - default y - select TIMER_OF - select CLKSRC_MMIO -+ select CEVT_SYSTICK_QUIRK - - config RALINK_ILL_ACC - bool ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -15,6 +15,26 @@ - #include - #include - -+static int mips_state_oneshot(struct clock_event_device *evt) -+{ -+ if (!cp0_timer_irq_installed) { -+ cp0_timer_irq_installed = 1; -+ setup_irq(evt->irq, &c0_compare_irqaction); -+ } -+ -+ return 0; -+} -+ -+static int mips_state_shutdown(struct clock_event_device *evt) -+{ -+ if (cp0_timer_irq_installed) { -+ cp0_timer_irq_installed = 0; -+ remove_irq(evt->irq, &c0_compare_irqaction); -+ } -+ -+ return 0; -+} -+ - static int mips_next_event(unsigned long delta, - struct clock_event_device *evt) - { -@@ -281,17 +301,21 @@ int r4k_clockevent_init(void) - cd->rating = 300; - cd->irq = irq; - cd->cpumask = cpumask_of(cpu); -+ cd->set_state_shutdown = mips_state_shutdown; -+ cd->set_state_oneshot = mips_state_oneshot; - cd->set_next_event = mips_next_event; - cd->event_handler = mips_event_handler; - - clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff); - -+#ifndef CONFIG_CEVT_SYSTICK_QUIRK - if (cp0_timer_irq_installed) - return 0; - - cp0_timer_irq_installed = 1; - - setup_irq(irq, &c0_compare_irqaction); -+#endif - - return 0; - } diff --git a/target/linux/ramips/patches-5.10/0006-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-5.10/0006-MIPS-ralink-add-cpu-frequency-scaling.patch deleted file mode 100644 index a3b8e4d250..0000000000 --- a/target/linux/ramips/patches-5.10/0006-MIPS-ralink-add-cpu-frequency-scaling.patch +++ /dev/null @@ -1,200 +0,0 @@ -From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 28 Jul 2013 16:26:41 +0200 -Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling - -This feature will break udelay() and cause the delay loop to have longer delays -when the frequency is scaled causing a performance hit. - -Signed-off-by: John Crispin ---- - arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++ - 1 file changed, 38 insertions(+) - ---- a/arch/mips/ralink/cevt-rt3352.c -+++ b/arch/mips/ralink/cevt-rt3352.c -@@ -29,6 +29,10 @@ - /* enable the counter */ - #define CFG_CNT_EN 0x1 - -+/* mt7620 frequency scaling defines */ -+#define CLK_LUT_CFG 0x40 -+#define SLEEP_EN BIT(31) -+ - struct systick_device { - void __iomem *membase; - struct clock_event_device dev; -@@ -36,21 +40,53 @@ struct systick_device { - int freq_scale; - }; - -+static void (*systick_freq_scaling)(struct systick_device *sdev, int status); -+ - static int systick_set_oneshot(struct clock_event_device *evt); - static int systick_shutdown(struct clock_event_device *evt); - -+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status) -+{ -+ if (sdev->freq_scale == status) -+ return; -+ -+ sdev->freq_scale = status; -+ -+ pr_info("%s: %s autosleep mode\n", sdev->dev.name, -+ (status) ? ("enable") : ("disable")); -+ if (status) -+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG); -+ else -+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG); -+} -+ -+static inline unsigned int read_count(struct systick_device *sdev) -+{ -+ return ioread32(sdev->membase + SYSTICK_COUNT); -+} -+ -+static inline unsigned int read_compare(struct systick_device *sdev) -+{ -+ return ioread32(sdev->membase + SYSTICK_COMPARE); -+} -+ -+static inline void write_compare(struct systick_device *sdev, unsigned int val) -+{ -+ iowrite32(val, sdev->membase + SYSTICK_COMPARE); -+} -+ - static int systick_next_event(unsigned long delta, - struct clock_event_device *evt) - { - struct systick_device *sdev; -- u32 count; -+ int res; - - sdev = container_of(evt, struct systick_device, dev); -- count = ioread32(sdev->membase + SYSTICK_COUNT); -- count = (count + delta) % SYSTICK_FREQ; -- iowrite32(count, sdev->membase + SYSTICK_COMPARE); -+ delta += read_count(sdev); -+ write_compare(sdev, delta); -+ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0; - -- return 0; -+ return res; - } - - static void systick_event_handler(struct clock_event_device *dev) -@@ -60,20 +96,25 @@ static void systick_event_handler(struct - - static irqreturn_t systick_interrupt(int irq, void *dev_id) - { -- struct clock_event_device *dev = (struct clock_event_device *) dev_id; -+ int ret = 0; -+ struct clock_event_device *cdev; -+ struct systick_device *sdev; - -- dev->event_handler(dev); -+ if (read_c0_cause() & STATUSF_IP7) { -+ cdev = (struct clock_event_device *) dev_id; -+ sdev = container_of(cdev, struct systick_device, dev); -+ -+ /* Clear Count/Compare Interrupt */ -+ write_compare(sdev, read_compare(sdev)); -+ cdev->event_handler(cdev); -+ ret = 1; -+ } - -- return IRQ_HANDLED; -+ return IRQ_RETVAL(ret); - } - - static struct systick_device systick = { - .dev = { -- /* -- * cevt-r4k uses 300, make sure systick -- * gets used if available -- */ -- .rating = 310, - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = systick_next_event, - .set_state_shutdown = systick_shutdown, -@@ -95,9 +136,15 @@ static int systick_shutdown(struct clock - sdev = container_of(evt, struct systick_device, dev); - - if (sdev->irq_requested) -- free_irq(systick.dev.irq, &systick_irqaction); -+ remove_irq(systick.dev.irq, &systick_irqaction); - sdev->irq_requested = 0; -- iowrite32(0, systick.membase + SYSTICK_CONFIG); -+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG); -+ -+ if (systick_freq_scaling) -+ systick_freq_scaling(sdev, 0); -+ -+ if (systick_freq_scaling) -+ systick_freq_scaling(sdev, 1); - - return 0; - } -@@ -117,34 +164,48 @@ static int systick_set_oneshot(struct cl - return 0; - } - -+static const struct of_device_id systick_match[] = { -+ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling}, -+ {}, -+}; -+ - static int __init ralink_systick_init(struct device_node *np) - { -+ const struct of_device_id *match; -+ int rating = 200; - int ret; - - systick.membase = of_iomap(np, 0); - if (!systick.membase) - return -ENXIO; - -- systick_irqaction.name = np->name; -- systick.dev.name = np->name; -- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60); -- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev); -- systick.dev.max_delta_ticks = 0x7fff; -- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev); -- systick.dev.min_delta_ticks = 0x3; -+ match = of_match_node(systick_match, np); -+ if (match) { -+ systick_freq_scaling = match->data; -+ /* -+ * cevt-r4k uses 300, make sure systick -+ * gets used if available -+ */ -+ rating = 310; -+ } -+ -+ /* enable counter than register clock source */ -+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG); -+ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name, -+ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up); -+ -+ /* register clock event */ - systick.dev.irq = irq_of_parse_and_map(np, 0); - if (!systick.dev.irq) { - pr_err("%pOFn: request_irq failed", np); - return -EINVAL; - } - -- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name, -- SYSTICK_FREQ, 301, 16, -- clocksource_mmio_readl_up); -- if (ret) -- return ret; -- -- clockevents_register_device(&systick.dev); -+ systick_irqaction.name = np->name; -+ systick.dev.name = np->name; -+ systick.dev.rating = rating; -+ systick.dev.cpumask = cpumask_of(0); -+ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff); - - pr_info("%pOFn: running - mult: %d, shift: %d\n", - np, systick.dev.mult, systick.dev.shift); diff --git a/target/linux/ramips/patches-5.10/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-5.10/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch deleted file mode 100644 index 54af571d85..0000000000 --- a/target/linux/ramips/patches-5.10/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 4 Aug 2014 18:46:02 +0200 -Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree - -Signed-off-by: John Crispin ---- - arch/mips/ralink/of.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -80,6 +80,8 @@ void __init plat_mem_setup(void) - - __dt_setup_arch(dtb); - -+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); -+ - of_scan_flat_dt(early_init_dt_find_memory, NULL); - if (memory_dtb) - of_scan_flat_dt(early_init_dt_scan_memory, NULL); diff --git a/target/linux/ramips/patches-5.10/0010-MIPS-add-bootargs-override-property.patch b/target/linux/ramips/patches-5.10/0010-MIPS-add-bootargs-override-property.patch deleted file mode 100644 index c19a0fb480..0000000000 --- a/target/linux/ramips/patches-5.10/0010-MIPS-add-bootargs-override-property.patch +++ /dev/null @@ -1,63 +0,0 @@ -From f15d27f9c90ede4b16eb37f9ae573ef81c2b6996 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Thu, 31 Dec 2020 18:49:12 +0100 -Subject: [PATCH] MIPS: add bootargs-override property - -Add support for the bootargs-override property to the chosen node -similar to the one used on ipq806x or mpc85xx. - -This is necessary, as the U-Boot used on some boards, notably the -Ubiquiti UniFi 6 Lite, overwrite the bootargs property of the chosen -node leading to a kernel panic when loading OpenWrt. - -Signed-off-by: David Bauer ---- - arch/mips/kernel/setup.c | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -571,8 +571,28 @@ static int __init bootcmdline_scan_chose - return 1; - } - -+static int __init bootcmdline_scan_chosen_override(unsigned long node, const char *uname, -+ int depth, void *data) -+{ -+ bool *dt_bootargs = data; -+ const char *p; -+ int l; -+ -+ if (depth != 1 || !data || strcmp(uname, "chosen") != 0) -+ return 0; -+ -+ p = of_get_flat_dt_prop(node, "bootargs-override", &l); -+ if (p != NULL && l > 0) { -+ strlcpy(boot_command_line, p, COMMAND_LINE_SIZE); -+ *dt_bootargs = true; -+ } -+ -+ return 1; -+} -+ - static void __init bootcmdline_init(char **cmdline_p) - { -+ bool dt_bootargs_override = false; - bool dt_bootargs = false; - - /* -@@ -586,6 +606,14 @@ static void __init bootcmdline_init(char - } - - /* -+ * If bootargs-override in the chosen node is set, use this as the -+ * command line -+ */ -+ of_scan_flat_dt(bootcmdline_scan_chosen_override, &dt_bootargs_override); -+ if (dt_bootargs_override) -+ return; -+ -+ /* - * If the user specified a built-in command line & - * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is - * prepended to arguments from the bootloader or DT so we'll copy them diff --git a/target/linux/ramips/patches-5.10/0013-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-5.10/0013-owrt-hack-fix-mt7688-cache-issue.patch deleted file mode 100644 index bedea14506..0000000000 --- a/target/linux/ramips/patches-5.10/0013-owrt-hack-fix-mt7688-cache-issue.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 7 Dec 2015 17:15:32 +0100 -Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue - -Signed-off-by: John Crispin ---- - arch/mips/kernel/setup.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -723,8 +723,6 @@ static void __init arch_mem_init(char ** - memblock_reserve(crashk_res.start, - crashk_res.end - crashk_res.start + 1); - #endif -- device_tree_init(); -- - /* - * In order to reduce the possibility of kernel panic when failed to - * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate -@@ -841,6 +839,7 @@ void __init setup_arch(char **cmdline_p) - - cpu_cache_init(); - paging_init(); -+ device_tree_init(); - } - - unsigned long kernelsp[NR_CPUS]; diff --git a/target/linux/ramips/patches-5.10/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-5.10/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch deleted file mode 100644 index 1dc54ccf23..0000000000 --- a/target/linux/ramips/patches-5.10/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 7 Dec 2015 17:18:05 +0100 -Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by - default - -Signed-off-by: John Crispin ---- - arch/mips/ralink/Kconfig | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -14,9 +14,9 @@ config CLKEVT_RT3352 - select CEVT_SYSTICK_QUIRK - - config RALINK_ILL_ACC -- bool -+ bool "illegal access irq" - depends on SOC_RT305X -- default y -+ default n - - config IRQ_INTC - bool diff --git a/target/linux/ramips/patches-5.10/0024-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-5.10/0024-GPIO-add-named-gpio-exports.patch deleted file mode 100644 index d4ea379159..0000000000 --- a/target/linux/ramips/patches-5.10/0024-GPIO-add-named-gpio-exports.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 12 Aug 2014 20:49:27 +0200 -Subject: [PATCH 24/53] GPIO: add named gpio exports - -Signed-off-by: John Crispin ---- - drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ - drivers/gpio/gpiolib-sysfs.c | 10 +++++- - include/asm-generic/gpio.h | 6 ++++ - include/linux/gpio/consumer.h | 8 +++++ - 4 files changed, 91 insertions(+), 1 deletion(-) - ---- a/drivers/gpio/gpiolib-of.c -+++ b/drivers/gpio/gpiolib-of.c -@@ -19,6 +19,8 @@ - #include - #include - #include -+#include -+#include - - #include "gpiolib.h" - #include "gpiolib-of.h" -@@ -915,3 +917,68 @@ void of_gpiochip_remove(struct gpio_chip - { - of_node_put(chip->of_node); - } -+ -+static struct of_device_id gpio_export_ids[] = { -+ { .compatible = "gpio-export" }, -+ { /* sentinel */ } -+}; -+ -+static int of_gpio_export_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *cnp; -+ u32 val; -+ int nb = 0; -+ -+ for_each_child_of_node(np, cnp) { -+ const char *name = NULL; -+ int gpio; -+ bool dmc; -+ int max_gpio = 1; -+ int i; -+ -+ of_property_read_string(cnp, "gpio-export,name", &name); -+ -+ if (!name) -+ max_gpio = of_gpio_count(cnp); -+ -+ for (i = 0; i < max_gpio; i++) { -+ unsigned flags = 0; -+ enum of_gpio_flags of_flags; -+ -+ gpio = of_get_gpio_flags(cnp, i, &of_flags); -+ if (!gpio_is_valid(gpio)) -+ return gpio; -+ -+ if (of_flags == OF_GPIO_ACTIVE_LOW) -+ flags |= GPIOF_ACTIVE_LOW; -+ -+ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) -+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; -+ else -+ flags |= GPIOF_IN; -+ -+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) -+ continue; -+ -+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); -+ gpio_export_with_name(gpio, dmc, name); -+ nb++; -+ } -+ } -+ -+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); -+ -+ return 0; -+} -+ -+static struct platform_driver gpio_export_driver = { -+ .driver = { -+ .name = "gpio-export", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(gpio_export_ids), -+ }, -+ .probe = of_gpio_export_probe, -+}; -+ -+module_platform_driver(gpio_export_driver); ---- a/drivers/gpio/gpiolib-sysfs.c -+++ b/drivers/gpio/gpiolib-sysfs.c -@@ -563,7 +563,7 @@ static struct class gpio_class = { - * - * Returns zero on success, else an error. - */ --int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) - { - struct gpio_chip *chip; - struct gpio_device *gdev; -@@ -625,6 +625,8 @@ int gpiod_export(struct gpio_desc *desc, - offset = gpio_chip_hwgpio(desc); - if (chip->names && chip->names[offset]) - ioname = chip->names[offset]; -+ if (name) -+ ioname = name; - - dev = device_create_with_groups(&gpio_class, &gdev->dev, - MKDEV(0, 0), data, gpio_groups, -@@ -646,6 +648,12 @@ err_unlock: - gpiod_dbg(desc, "%s: status %d\n", __func__, status); - return status; - } -+EXPORT_SYMBOL_GPL(__gpiod_export); -+ -+int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+{ -+ return __gpiod_export(desc, direction_may_change, NULL); -+} - EXPORT_SYMBOL_GPL(gpiod_export); - - static int match_export(struct device *dev, const void *desc) ---- a/include/asm-generic/gpio.h -+++ b/include/asm-generic/gpio.h -@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g - return gpiod_export(gpio_to_desc(gpio), direction_may_change); - } - -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); -+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) -+{ -+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); -+} -+ - static inline int gpio_export_link(struct device *dev, const char *name, - unsigned gpio) - { ---- a/include/linux/gpio/consumer.h -+++ b/include/linux/gpio/consumer.h -@@ -668,6 +668,7 @@ static inline void devm_acpi_dev_remove_ - - #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) - -+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); - int gpiod_export(struct gpio_desc *desc, bool direction_may_change); - int gpiod_export_link(struct device *dev, const char *name, - struct gpio_desc *desc); -@@ -675,6 +676,13 @@ void gpiod_unexport(struct gpio_desc *de - - #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ - -+static inline int _gpiod_export(struct gpio_desc *desc, -+ bool direction_may_change, -+ const char *name) -+{ -+ return -ENOSYS; -+} -+ - static inline int gpiod_export(struct gpio_desc *desc, - bool direction_may_change) - { diff --git a/target/linux/ramips/patches-5.10/0026-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-5.10/0026-DT-Add-documentation-for-gpio-ralink.patch deleted file mode 100644 index 7d5f98f647..0000000000 --- a/target/linux/ramips/patches-5.10/0026-DT-Add-documentation-for-gpio-ralink.patch +++ /dev/null @@ -1,59 +0,0 @@ -From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 28 Jul 2013 19:45:30 +0200 -Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink - -Describe gpio-ralink binding. - -Signed-off-by: John Crispin -Cc: linux-mips@linux-mips.org -Cc: devicetree@vger.kernel.org -Cc: linux-gpio@vger.kernel.org ---- - .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++ - 1 file changed, 40 insertions(+) - create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt -@@ -0,0 +1,40 @@ -+Ralink SoC GPIO controller bindings -+ -+Required properties: -+- compatible: -+ - "ralink,rt2880-gpio" for Ralink controllers -+- #gpio-cells : Should be two. -+ - first cell is the pin number -+ - second cell is used to specify optional parameters (unused) -+- gpio-controller : Marks the device node as a GPIO controller -+- reg : Physical base address and length of the controller's registers -+- interrupt-parent: phandle to the INTC device node -+- interrupts : Specify the INTC interrupt number -+- ralink,num-gpios : Specify the number of GPIOs -+- ralink,register-map : The register layout depends on the GPIO bank and actual -+ SoC type. Register offsets need to be in this order. -+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ] -+ -+Optional properties: -+- ralink,gpio-base : Specify the GPIO chips base number -+ -+Example: -+ -+ gpio0: gpio@600 { -+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; -+ -+ #gpio-cells = <2>; -+ gpio-controller; -+ -+ reg = <0x600 0x34>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <6>; -+ -+ ralink,gpio-base = <0>; -+ ralink,num-gpios = <24>; -+ ralink,register-map = [ 00 04 08 0c -+ 20 24 28 2c -+ 30 34 ]; -+ -+ }; diff --git a/target/linux/ramips/patches-5.10/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-5.10/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch deleted file mode 100644 index eae507bcd7..0000000000 --- a/target/linux/ramips/patches-5.10/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch +++ /dev/null @@ -1,416 +0,0 @@ -From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 4 Aug 2014 20:36:29 +0200 -Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC - -Add gpio driver for Ralink SoC. This driver makes the gpio core on -RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work. - -Signed-off-by: John Crispin -Cc: linux-mips@linux-mips.org -Cc: linux-gpio@vger.kernel.org ---- - arch/mips/include/asm/mach-ralink/gpio.h | 24 ++ - drivers/gpio/Kconfig | 6 + - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++ - 4 files changed, 386 insertions(+) - create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h - create mode 100644 drivers/gpio/gpio-ralink.c - ---- /dev/null -+++ b/arch/mips/include/asm/mach-ralink/gpio.h -@@ -0,0 +1,24 @@ -+/* -+ * Ralink SoC GPIO API support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ -+ -+#ifndef __ASM_MACH_RALINK_GPIO_H -+#define __ASM_MACH_RALINK_GPIO_H -+ -+#define ARCH_NR_GPIOS 128 -+#include -+ -+#define gpio_get_value __gpio_get_value -+#define gpio_set_value __gpio_set_value -+#define gpio_cansleep __gpio_cansleep -+#define gpio_to_irq __gpio_to_irq -+ -+#endif /* __ASM_MACH_RALINK_GPIO_H */ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -471,6 +471,12 @@ config GPIO_SNPS_CREG - where only several fields in register belong to GPIO lines and - each GPIO line owns a field with different length and on/off value. - -+config GPIO_RALINK -+ bool "Ralink GPIO Support" -+ depends on RALINK -+ help -+ Say yes here to support the Ralink SoC GPIO device -+ - config GPIO_SPEAR_SPICS - bool "ST SPEAr13xx SPI Chip Select as GPIO support" - depends on PLAT_SPEAR ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -112,6 +112,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos - obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o - obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o - obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o -+obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o - obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o - obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o - obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o ---- /dev/null -+++ b/drivers/gpio/gpio-ralink.c -@@ -0,0 +1,341 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2009-2011 Gabor Juhos -+ * Copyright (C) 2013 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+enum ralink_gpio_reg { -+ GPIO_REG_INT = 0, -+ GPIO_REG_EDGE, -+ GPIO_REG_RENA, -+ GPIO_REG_FENA, -+ GPIO_REG_DATA, -+ GPIO_REG_DIR, -+ GPIO_REG_POL, -+ GPIO_REG_SET, -+ GPIO_REG_RESET, -+ GPIO_REG_TOGGLE, -+ GPIO_REG_MAX -+}; -+ -+struct ralink_gpio_chip { -+ struct gpio_chip chip; -+ u8 regs[GPIO_REG_MAX]; -+ -+ spinlock_t lock; -+ void __iomem *membase; -+ struct irq_domain *domain; -+ int irq; -+ -+ u32 rising; -+ u32 falling; -+}; -+ -+#define MAP_MAX 4 -+static struct irq_domain *irq_map[MAP_MAX]; -+static int irq_map_count; -+static atomic_t irq_refcount = ATOMIC_INIT(0); -+ -+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip) -+{ -+ struct ralink_gpio_chip *rg; -+ -+ rg = container_of(chip, struct ralink_gpio_chip, chip); -+ -+ return rg; -+} -+ -+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val) -+{ -+ iowrite32(val, rg->membase + rg->regs[reg]); -+} -+ -+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg) -+{ -+ return ioread32(rg->membase + rg->regs[reg]); -+} -+ -+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ -+ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset)); -+} -+ -+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ -+ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset)); -+} -+ -+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ unsigned long flags; -+ u32 t; -+ -+ spin_lock_irqsave(&rg->lock, flags); -+ t = rt_gpio_r32(rg, GPIO_REG_DIR); -+ t &= ~BIT(offset); -+ rt_gpio_w32(rg, GPIO_REG_DIR, t); -+ spin_unlock_irqrestore(&rg->lock, flags); -+ -+ return 0; -+} -+ -+static int ralink_gpio_direction_output(struct gpio_chip *chip, -+ unsigned offset, int value) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ unsigned long flags; -+ u32 t; -+ -+ spin_lock_irqsave(&rg->lock, flags); -+ ralink_gpio_set(chip, offset, value); -+ t = rt_gpio_r32(rg, GPIO_REG_DIR); -+ t |= BIT(offset); -+ rt_gpio_w32(rg, GPIO_REG_DIR, t); -+ spin_unlock_irqrestore(&rg->lock, flags); -+ -+ return 0; -+} -+ -+static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ -+ if (rg->irq < 1) -+ return -1; -+ -+ return irq_create_mapping(rg->domain, pin); -+} -+ -+static void ralink_gpio_irq_handler(struct irq_desc *desc) -+{ -+ int i; -+ -+ for (i = 0; i < irq_map_count; i++) { -+ struct irq_domain *domain = irq_map[i]; -+ struct ralink_gpio_chip *rg; -+ unsigned long pending; -+ int bit; -+ -+ rg = (struct ralink_gpio_chip *) domain->host_data; -+ pending = rt_gpio_r32(rg, GPIO_REG_INT); -+ -+ for_each_set_bit(bit, &pending, rg->chip.ngpio) { -+ u32 map = irq_find_mapping(domain, bit); -+ generic_handle_irq(map); -+ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit)); -+ } -+ } -+} -+ -+static void ralink_gpio_irq_unmask(struct irq_data *d) -+{ -+ struct ralink_gpio_chip *rg; -+ unsigned long flags; -+ u32 rise, fall; -+ -+ rg = (struct ralink_gpio_chip *) d->domain->host_data; -+ rise = rt_gpio_r32(rg, GPIO_REG_RENA); -+ fall = rt_gpio_r32(rg, GPIO_REG_FENA); -+ -+ spin_lock_irqsave(&rg->lock, flags); -+ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising)); -+ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling)); -+ spin_unlock_irqrestore(&rg->lock, flags); -+} -+ -+static void ralink_gpio_irq_mask(struct irq_data *d) -+{ -+ struct ralink_gpio_chip *rg; -+ unsigned long flags; -+ u32 rise, fall; -+ -+ rg = (struct ralink_gpio_chip *) d->domain->host_data; -+ rise = rt_gpio_r32(rg, GPIO_REG_RENA); -+ fall = rt_gpio_r32(rg, GPIO_REG_FENA); -+ -+ spin_lock_irqsave(&rg->lock, flags); -+ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq)); -+ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq)); -+ spin_unlock_irqrestore(&rg->lock, flags); -+} -+ -+static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type) -+{ -+ struct ralink_gpio_chip *rg; -+ u32 mask = BIT(d->hwirq); -+ -+ rg = (struct ralink_gpio_chip *) d->domain->host_data; -+ -+ if (type == IRQ_TYPE_PROBE) { -+ if ((rg->rising | rg->falling) & mask) -+ return 0; -+ -+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; -+ } -+ -+ if (type & IRQ_TYPE_EDGE_RISING) -+ rg->rising |= mask; -+ else -+ rg->rising &= ~mask; -+ -+ if (type & IRQ_TYPE_EDGE_FALLING) -+ rg->falling |= mask; -+ else -+ rg->falling &= ~mask; -+ -+ return 0; -+} -+ -+static struct irq_chip ralink_gpio_irq_chip = { -+ .name = "GPIO", -+ .irq_unmask = ralink_gpio_irq_unmask, -+ .irq_mask = ralink_gpio_irq_mask, -+ .irq_mask_ack = ralink_gpio_irq_mask, -+ .irq_set_type = ralink_gpio_irq_type, -+}; -+ -+static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) -+{ -+ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq); -+ irq_set_handler_data(irq, d); -+ -+ return 0; -+} -+ -+static const struct irq_domain_ops irq_domain_ops = { -+ .xlate = irq_domain_xlate_onecell, -+ .map = gpio_map, -+}; -+ -+static void ralink_gpio_irq_init(struct device_node *np, -+ struct ralink_gpio_chip *rg) -+{ -+ if (irq_map_count >= MAP_MAX) -+ return; -+ -+ rg->irq = irq_of_parse_and_map(np, 0); -+ if (!rg->irq) -+ return; -+ -+ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio, -+ &irq_domain_ops, rg); -+ if (!rg->domain) { -+ dev_err(rg->chip.parent, "irq_domain_add_linear failed\n"); -+ return; -+ } -+ -+ irq_map[irq_map_count++] = rg->domain; -+ -+ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0); -+ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0); -+ -+ if (!atomic_read(&irq_refcount)) -+ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler); -+ atomic_inc(&irq_refcount); -+ -+ dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio); -+} -+ -+static int ralink_gpio_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ struct ralink_gpio_chip *rg; -+ const __be32 *ngpio, *gpiobase; -+ -+ if (!res) { -+ dev_err(&pdev->dev, "failed to find resource\n"); -+ return -ENOMEM; -+ } -+ -+ rg = devm_kzalloc(&pdev->dev, -+ sizeof(struct ralink_gpio_chip), GFP_KERNEL); -+ if (!rg) -+ return -ENOMEM; -+ -+ rg->membase = devm_ioremap_resource(&pdev->dev, res); -+ if (!rg->membase) { -+ dev_err(&pdev->dev, "cannot remap I/O memory region\n"); -+ return -ENOMEM; -+ } -+ -+ if (of_property_read_u8_array(np, "ralink,register-map", -+ rg->regs, GPIO_REG_MAX)) { -+ dev_err(&pdev->dev, "failed to read register definition\n"); -+ return -EINVAL; -+ } -+ -+ ngpio = of_get_property(np, "ralink,num-gpios", NULL); -+ if (!ngpio) { -+ dev_err(&pdev->dev, "failed to read number of pins\n"); -+ return -EINVAL; -+ } -+ -+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL); -+ if (gpiobase) -+ rg->chip.base = be32_to_cpu(*gpiobase); -+ else -+ rg->chip.base = -1; -+ -+ spin_lock_init(&rg->lock); -+ -+ rg->chip.parent = &pdev->dev; -+ rg->chip.label = dev_name(&pdev->dev); -+ rg->chip.of_node = np; -+ rg->chip.ngpio = be32_to_cpu(*ngpio); -+ rg->chip.direction_input = ralink_gpio_direction_input; -+ rg->chip.direction_output = ralink_gpio_direction_output; -+ rg->chip.get = ralink_gpio_get; -+ rg->chip.set = ralink_gpio_set; -+ rg->chip.request = gpiochip_generic_request; -+ rg->chip.to_irq = ralink_gpio_to_irq; -+ rg->chip.free = gpiochip_generic_free; -+ -+ /* set polarity to low for all lines */ -+ rt_gpio_w32(rg, GPIO_REG_POL, 0); -+ -+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio); -+ -+ ralink_gpio_irq_init(np, rg); -+ -+ return gpiochip_add(&rg->chip); -+} -+ -+static const struct of_device_id ralink_gpio_match[] = { -+ { .compatible = "ralink,rt2880-gpio" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ralink_gpio_match); -+ -+static struct platform_driver ralink_gpio_driver = { -+ .probe = ralink_gpio_probe, -+ .driver = { -+ .name = "rt2880_gpio", -+ .owner = THIS_MODULE, -+ .of_match_table = ralink_gpio_match, -+ }, -+}; -+ -+static int __init ralink_gpio_init(void) -+{ -+ return platform_driver_register(&ralink_gpio_driver); -+} -+ -+subsys_initcall(ralink_gpio_init); diff --git a/target/linux/ramips/patches-5.10/0029-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch b/target/linux/ramips/patches-5.10/0029-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch deleted file mode 100644 index 8520ce32ff..0000000000 --- a/target/linux/ramips/patches-5.10/0029-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 57fa7f2f4ef6f78ce1d30509c0d111aa3791b524 Mon Sep 17 00:00:00 2001 -From: Daniel Santos -Date: Sun, 4 Nov 2018 20:24:32 -0600 -Subject: gpio-ralink: Add support for GPIO as interrupt-controller - -Signed-off-by: Daniel Santos ---- - Documentation/devicetree/bindings/gpio/gpio-ralink.txt | 6 ++++++ - drivers/gpio/gpio-ralink.c | 2 +- - 2 files changed, 7 insertions(+), 1 deletion(-) - ---- a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt -+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt -@@ -17,6 +17,9 @@ Required properties: - - Optional properties: - - ralink,gpio-base : Specify the GPIO chips base number -+- interrupt-controller : marks this as an interrupt controller -+- #interrupt-cells : a standard two-cell interrupt flag, see -+ interrupt-controller/interrupts.txt - - Example: - -@@ -28,6 +31,9 @@ Example: - - reg = <0x600 0x34>; - -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ - interrupt-parent = <&intc>; - interrupts = <6>; - ---- a/drivers/gpio/gpio-ralink.c -+++ b/drivers/gpio/gpio-ralink.c -@@ -220,7 +220,7 @@ static int gpio_map(struct irq_domain *d - } - - static const struct irq_domain_ops irq_domain_ops = { -- .xlate = irq_domain_xlate_onecell, -+ .xlate = irq_domain_xlate_twocell, - .map = gpio_map, - }; - diff --git a/target/linux/ramips/patches-5.10/0031-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-5.10/0031-uvc-add-iPassion-iP2970-support.patch deleted file mode 100644 index 084b655483..0000000000 --- a/target/linux/ramips/patches-5.10/0031-uvc-add-iPassion-iP2970-support.patch +++ /dev/null @@ -1,246 +0,0 @@ -From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 19 Sep 2013 01:50:59 +0200 -Subject: [PATCH 31/53] uvc: add iPassion iP2970 support - -Signed-off-by: John Crispin ---- - drivers/media/usb/uvc/uvc_driver.c | 12 +++ - drivers/media/usb/uvc/uvc_status.c | 2 + - drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++ - drivers/media/usb/uvc/uvcvideo.h | 5 +- - 4 files changed, 165 insertions(+), 1 deletion(-) - ---- a/drivers/media/usb/uvc/uvc_driver.c -+++ b/drivers/media/usb/uvc/uvc_driver.c -@@ -2908,6 +2908,18 @@ static const struct usb_device_id uvc_id - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, - .driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) }, -+ /* iPassion iP2970 */ -+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE -+ | USB_DEVICE_ID_MATCH_INT_INFO, -+ .idVendor = 0x1B3B, -+ .idProduct = 0x2970, -+ .bInterfaceClass = USB_CLASS_VIDEO, -+ .bInterfaceSubClass = 1, -+ .bInterfaceProtocol = 0, -+ .driver_info = UVC_QUIRK_PROBE_MINMAX -+ | UVC_QUIRK_STREAM_NO_FID -+ | UVC_QUIRK_MOTION -+ | UVC_QUIRK_SINGLE_ISO }, - /* Generic USB Video Class */ - { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) }, - { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) }, ---- a/drivers/media/usb/uvc/uvc_status.c -+++ b/drivers/media/usb/uvc/uvc_status.c -@@ -223,6 +223,7 @@ static void uvc_status_complete(struct u - if (uvc_event_control(urb, status, len)) - /* The URB will be resubmitted in work context. */ - return; -+ dev->motion = 1; - break; - } - -@@ -271,6 +272,7 @@ int uvc_status_init(struct uvc_device *d - } - - pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); -+ dev->motion = 0; - - /* For high-speed interrupt endpoints, the bInterval value is used as - * an exponent of two. Some developers forgot about it. ---- a/drivers/media/usb/uvc/uvc_video.c -+++ b/drivers/media/usb/uvc/uvc_video.c -@@ -16,6 +16,11 @@ - #include - #include - #include -+#include -+#include -+#include -+#include -+#include - - #include - -@@ -1156,9 +1161,149 @@ static void uvc_video_decode_data(struct - uvc_urb->async_operations++; - } - -+struct bh_priv { -+ unsigned long seen; -+}; -+ -+struct bh_event { -+ const char *name; -+ struct sk_buff *skb; -+ struct work_struct work; -+}; -+ -+#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args ) -+#define BH_DBG(fmt, args...) do {} while (0) -+#define BH_SKB_SIZE 2048 -+ -+extern u64 uevent_next_seqnum(void); -+static int seen = 0; -+ -+static int bh_event_add_var(struct bh_event *event, int argv, -+ const char *format, ...) -+{ -+ static char buf[128]; -+ char *s; -+ va_list args; -+ int len; -+ -+ if (argv) -+ return 0; -+ -+ va_start(args, format); -+ len = vsnprintf(buf, sizeof(buf), format, args); -+ va_end(args); -+ -+ if (len >= sizeof(buf)) { -+ BH_ERR("buffer size too small\n"); -+ WARN_ON(1); -+ return -ENOMEM; -+ } -+ -+ s = skb_put(event->skb, len + 1); -+ strcpy(s, buf); -+ -+ BH_DBG("added variable '%s'\n", s); -+ -+ return 0; -+} -+ -+static int motion_hotplug_fill_event(struct bh_event *event) -+{ -+ int s = jiffies; -+ int ret; -+ -+ if (!seen) -+ seen = jiffies; -+ -+ ret = bh_event_add_var(event, 0, "HOME=%s", "/"); -+ if (ret) -+ return ret; -+ -+ ret = bh_event_add_var(event, 0, "PATH=%s", -+ "/sbin:/bin:/usr/sbin:/usr/bin"); -+ if (ret) -+ return ret; -+ -+ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb"); -+ if (ret) -+ return ret; -+ -+ ret = bh_event_add_var(event, 0, "ACTION=motion"); -+ if (ret) -+ return ret; -+ -+ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen); -+ if (ret) -+ return ret; -+ seen = s; -+ -+ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum()); -+ -+ return ret; -+} -+ -+static void motion_hotplug_work(struct work_struct *work) -+{ -+ struct bh_event *event = container_of(work, struct bh_event, work); -+ int ret = 0; -+ -+ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL); -+ if (!event->skb) -+ goto out_free_event; -+ -+ ret = bh_event_add_var(event, 0, "%s@", "add"); -+ if (ret) -+ goto out_free_skb; -+ -+ ret = motion_hotplug_fill_event(event); -+ if (ret) -+ goto out_free_skb; -+ -+ NETLINK_CB(event->skb).dst_group = 1; -+ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL); -+ -+out_free_skb: -+ if (ret) { -+ BH_ERR("work error %d\n", ret); -+ kfree_skb(event->skb); -+ } -+out_free_event: -+ kfree(event); -+} -+ -+static int motion_hotplug_create_event(void) -+{ -+ struct bh_event *event; -+ -+ event = kzalloc(sizeof(*event), GFP_KERNEL); -+ if (!event) -+ return -ENOMEM; -+ -+ event->name = "motion"; -+ -+ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work); -+ schedule_work(&event->work); -+ -+ return 0; -+} -+ -+#define MOTION_FLAG_OFFSET 4 - static void uvc_video_decode_end(struct uvc_streaming *stream, - struct uvc_buffer *buf, const u8 *data, int len) - { -+ if ((stream->dev->quirks & UVC_QUIRK_MOTION) && -+ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) { -+ u8 *mem; -+ buf->state = UVC_BUF_STATE_READY; -+ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET); -+ if ( stream->dev->motion ) { -+ stream->dev->motion = 0; -+ motion_hotplug_create_event(); -+ } else { -+ *mem &= 0x7f; -+ } -+ } -+ - /* Mark the buffer as done if the EOF marker is set. */ - if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) { - uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); -@@ -1715,6 +1860,8 @@ static int uvc_init_video_isoc(struct uv - if (npackets == 0) - return -ENOMEM; - -+ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO) -+ npackets = 1; - size = npackets * psize; - - for_each_uvc_urb(uvc_urb, stream) { ---- a/drivers/media/usb/uvc/uvcvideo.h -+++ b/drivers/media/usb/uvc/uvcvideo.h -@@ -199,7 +199,9 @@ - #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400 - #define UVC_QUIRK_FORCE_Y8 0x00000800 - #define UVC_QUIRK_FORCE_BPP 0x00001000 -- -+#define UVC_QUIRK_MOTION 0x00001000 -+#define UVC_QUIRK_SINGLE_ISO 0x00002000 -+ - /* Format flags */ - #define UVC_FMT_FLAG_COMPRESSED 0x00000001 - #define UVC_FMT_FLAG_STREAM 0x00000002 -@@ -666,6 +668,7 @@ struct uvc_device { - u8 *status; - struct input_dev *input; - char input_phys[64]; -+ int motion; - - struct uvc_ctrl_work { - struct work_struct work; diff --git a/target/linux/ramips/patches-5.10/0037-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-5.10/0037-mtd-cfi-cmdset-0002-force-word-write.patch deleted file mode 100644 index 7011bbe50b..0000000000 --- a/target/linux/ramips/patches-5.10/0037-mtd-cfi-cmdset-0002-force-word-write.patch +++ /dev/null @@ -1,20 +0,0 @@ -From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 15 Jul 2013 00:39:21 +0200 -Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write - ---- - drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -40,7 +40,7 @@ - #include - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_RETRIES 3 - diff --git a/target/linux/ramips/patches-5.10/0041-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-5.10/0041-DT-Add-documentation-for-spi-rt2880.patch deleted file mode 100644 index e2643e3f25..0000000000 --- a/target/linux/ramips/patches-5.10/0041-DT-Add-documentation-for-spi-rt2880.patch +++ /dev/null @@ -1,44 +0,0 @@ -From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 9 Aug 2013 20:12:59 +0200 -Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880 - -Describe the SPI master found on the MIPS based Ralink RT2880 SoC. - -Signed-off-by: John Crispin ---- - .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++ - 1 file changed, 28 insertions(+) - create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt -@@ -0,0 +1,28 @@ -+Ralink SoC RT2880 SPI master controller. -+ -+This SPI controller is found on most wireless SoCs made by ralink. -+ -+Required properties: -+- compatible : "ralink,rt2880-spi" -+- reg : The register base for the controller. -+- #address-cells : <1>, as required by generic SPI binding. -+- #size-cells : <0>, also as required by generic SPI binding. -+ -+Child nodes as per the generic SPI binding. -+ -+Example: -+ -+ spi@b00 { -+ compatible = "ralink,rt2880-spi"; -+ reg = <0xb00 0x100>; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ m25p80@0 { -+ compatible = "m25p80"; -+ reg = <0>; -+ spi-max-frequency = <10000000>; -+ }; -+ }; -+ diff --git a/target/linux/ramips/patches-5.10/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-5.10/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch deleted file mode 100644 index 652371617a..0000000000 --- a/target/linux/ramips/patches-5.10/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch +++ /dev/null @@ -1,574 +0,0 @@ -From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 11:15:12 +0100 -Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver - -Add the driver needed to make SPI work on Ralink SoC. - -Signed-off-by: Gabor Juhos -Acked-by: John Crispin ---- - drivers/spi/Kconfig | 6 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 537 insertions(+) - create mode 100644 drivers/spi/spi-rt2880.c - ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -605,6 +605,12 @@ config SPI_QCOM_GENI - This driver can also be built as a module. If so, the module - will be called spi-geni-qcom. - -+config SPI_RT2880 -+ tristate "Ralink RT288x SPI Controller" -+ depends on RALINK -+ help -+ This selects a driver for the Ralink RT288x/RT305x SPI Controller. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C24XX ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -87,6 +87,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o - obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o - obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o - obj-$(CONFIG_SPI_RSPI) += spi-rspi.o -+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o - obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o - spi-s3c24xx-hw-y := spi-s3c24xx.o - spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o ---- /dev/null -+++ b/drivers/spi/spi-rt2880.c -@@ -0,0 +1,530 @@ -+/* -+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver -+ * -+ * Copyright (C) 2011 Sergiy -+ * Copyright (C) 2011-2013 Gabor Juhos -+ * -+ * Some parts are based on spi-orion.c: -+ * Author: Shadi Ammouri -+ * Copyright (C) 2007-2008 Marvell Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRIVER_NAME "spi-rt2880" -+ -+#define RAMIPS_SPI_STAT 0x00 -+#define RAMIPS_SPI_CFG 0x10 -+#define RAMIPS_SPI_CTL 0x14 -+#define RAMIPS_SPI_DATA 0x20 -+#define RAMIPS_SPI_ADDR 0x24 -+#define RAMIPS_SPI_BS 0x28 -+#define RAMIPS_SPI_USER 0x2C -+#define RAMIPS_SPI_TXFIFO 0x30 -+#define RAMIPS_SPI_RXFIFO 0x34 -+#define RAMIPS_SPI_FIFO_STAT 0x38 -+#define RAMIPS_SPI_MODE 0x3C -+#define RAMIPS_SPI_DEV_OFFSET 0x40 -+#define RAMIPS_SPI_DMA 0x80 -+#define RAMIPS_SPI_DMASTAT 0x84 -+#define RAMIPS_SPI_ARBITER 0xF0 -+ -+/* SPISTAT register bit field */ -+#define SPISTAT_BUSY BIT(0) -+ -+/* SPICFG register bit field */ -+#define SPICFG_ADDRMODE BIT(12) -+#define SPICFG_RXENVDIS BIT(11) -+#define SPICFG_RXCAP BIT(10) -+#define SPICFG_SPIENMODE BIT(9) -+#define SPICFG_MSBFIRST BIT(8) -+#define SPICFG_SPICLKPOL BIT(6) -+#define SPICFG_RXCLKEDGE_FALLING BIT(5) -+#define SPICFG_TXCLKEDGE_FALLING BIT(4) -+#define SPICFG_HIZSPI BIT(3) -+#define SPICFG_SPICLK_PRESCALE_MASK 0x7 -+#define SPICFG_SPICLK_DIV2 0 -+#define SPICFG_SPICLK_DIV4 1 -+#define SPICFG_SPICLK_DIV8 2 -+#define SPICFG_SPICLK_DIV16 3 -+#define SPICFG_SPICLK_DIV32 4 -+#define SPICFG_SPICLK_DIV64 5 -+#define SPICFG_SPICLK_DIV128 6 -+#define SPICFG_SPICLK_DISABLE 7 -+ -+/* SPICTL register bit field */ -+#define SPICTL_START BIT(4) -+#define SPICTL_HIZSDO BIT(3) -+#define SPICTL_STARTWR BIT(2) -+#define SPICTL_STARTRD BIT(1) -+#define SPICTL_SPIENA BIT(0) -+ -+/* SPIUSER register bit field */ -+#define SPIUSER_USERMODE BIT(21) -+#define SPIUSER_INSTR_PHASE BIT(20) -+#define SPIUSER_ADDR_PHASE_MASK 0x7 -+#define SPIUSER_ADDR_PHASE_OFFSET 17 -+#define SPIUSER_MODE_PHASE BIT(16) -+#define SPIUSER_DUMMY_PHASE_MASK 0x3 -+#define SPIUSER_DUMMY_PHASE_OFFSET 14 -+#define SPIUSER_DATA_PHASE_MASK 0x3 -+#define SPIUSER_DATA_PHASE_OFFSET 12 -+#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET) -+#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET) -+#define SPIUSER_ADDR_TYPE_OFFSET 9 -+#define SPIUSER_MODE_TYPE_OFFSET 6 -+#define SPIUSER_DUMMY_TYPE_OFFSET 3 -+#define SPIUSER_DATA_TYPE_OFFSET 0 -+#define SPIUSER_TRANSFER_MASK 0x7 -+#define SPIUSER_TRANSFER_SINGLE BIT(0) -+#define SPIUSER_TRANSFER_DUAL BIT(1) -+#define SPIUSER_TRANSFER_QUAD BIT(2) -+ -+#define SPIUSER_TRANSFER_TYPE(type) ( \ -+ (type << SPIUSER_ADDR_TYPE_OFFSET) | \ -+ (type << SPIUSER_MODE_TYPE_OFFSET) | \ -+ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \ -+ (type << SPIUSER_DATA_TYPE_OFFSET) \ -+) -+ -+/* SPIFIFOSTAT register bit field */ -+#define SPIFIFOSTAT_TXEMPTY BIT(19) -+#define SPIFIFOSTAT_RXEMPTY BIT(18) -+#define SPIFIFOSTAT_TXFULL BIT(17) -+#define SPIFIFOSTAT_RXFULL BIT(16) -+#define SPIFIFOSTAT_FIFO_MASK 0xff -+#define SPIFIFOSTAT_TX_OFFSET 8 -+#define SPIFIFOSTAT_RX_OFFSET 0 -+ -+#define SPI_FIFO_DEPTH 16 -+ -+/* SPIMODE register bit field */ -+#define SPIMODE_MODE_OFFSET 24 -+#define SPIMODE_DUMMY_OFFSET 0 -+ -+/* SPIARB register bit field */ -+#define SPICTL_ARB_EN BIT(31) -+#define SPICTL_CSCTL1 BIT(16) -+#define SPI1_POR BIT(1) -+#define SPI0_POR BIT(0) -+ -+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \ -+ SPI_CS_HIGH) -+ -+static atomic_t hw_reset_count = ATOMIC_INIT(0); -+ -+struct rt2880_spi { -+ struct spi_master *master; -+ void __iomem *base; -+ u32 speed; -+ u16 wait_loops; -+ u16 mode; -+ struct clk *clk; -+}; -+ -+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi) -+{ -+ return spi_master_get_devdata(spi->master); -+} -+ -+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg) -+{ -+ return ioread32(rs->base + reg); -+} -+ -+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg, -+ const u32 val) -+{ -+ iowrite32(val, rs->base + reg); -+} -+ -+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask) -+{ -+ void __iomem *addr = rs->base + reg; -+ -+ iowrite32((ioread32(addr) | mask), addr); -+} -+ -+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask) -+{ -+ void __iomem *addr = rs->base + reg; -+ -+ iowrite32((ioread32(addr) & ~mask), addr); -+} -+ -+static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed) -+{ -+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); -+ u32 rate; -+ u32 prescale; -+ -+ /* -+ * the supported rates are: 2, 4, 8, ... 128 -+ * round up as we look for equal or less speed -+ */ -+ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed); -+ rate = roundup_pow_of_two(rate); -+ -+ /* Convert the rate to SPI clock divisor value. */ -+ prescale = ilog2(rate / 2); -+ -+ /* some tolerance. double and add 100 */ -+ rs->wait_loops = (8 * HZ * loops_per_jiffy) / -+ (clk_get_rate(rs->clk) / rate); -+ rs->wait_loops = (rs->wait_loops << 1) + 100; -+ rs->speed = speed; -+ -+ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n", -+ clk_get_rate(rs->clk) / rate, speed, rate, prescale, -+ rs->wait_loops); -+ -+ return prescale; -+} -+ -+static u32 get_arbiter_offset(struct spi_master *master) -+{ -+ u32 offset; -+ -+ offset = RAMIPS_SPI_ARBITER; -+ if (master->bus_num == 1) -+ offset -= RAMIPS_SPI_DEV_OFFSET; -+ -+ return offset; -+} -+ -+static void rt2880_spi_set_cs(struct spi_device *spi, bool enable) -+{ -+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); -+ -+ if (enable) -+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); -+ else -+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); -+} -+ -+static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len) -+{ -+ int loop = rs->wait_loops * len; -+ -+ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop) -+ cpu_relax(); -+ -+ if (loop) -+ return 0; -+ -+ return -ETIMEDOUT; -+} -+ -+static void rt2880_dump_reg(struct spi_master *master) -+{ -+ struct rt2880_spi *rs = spi_master_get_devdata(master); -+ -+ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \ -+ "data: %08x, arb: %08x\n", -+ rt2880_spi_read(rs, RAMIPS_SPI_STAT), -+ rt2880_spi_read(rs, RAMIPS_SPI_CFG), -+ rt2880_spi_read(rs, RAMIPS_SPI_CTL), -+ rt2880_spi_read(rs, RAMIPS_SPI_DATA), -+ rt2880_spi_read(rs, get_arbiter_offset(master))); -+} -+ -+static int rt2880_spi_transfer_one(struct spi_master *master, -+ struct spi_device *spi, struct spi_transfer *xfer) -+{ -+ struct rt2880_spi *rs = spi_master_get_devdata(master); -+ unsigned len; -+ const u8 *tx = xfer->tx_buf; -+ u8 *rx = xfer->rx_buf; -+ int err = 0; -+ -+ /* change clock speed */ -+ if (unlikely(rs->speed != xfer->speed_hz)) { -+ u32 reg; -+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); -+ reg &= ~SPICFG_SPICLK_PRESCALE_MASK; -+ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz); -+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); -+ } -+ -+ if (tx) { -+ len = xfer->len; -+ while (len-- > 0) { -+ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++); -+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR); -+ err = rt2880_spi_wait_ready(rs, 1); -+ if (err) { -+ dev_err(&spi->dev, "TX failed, err=%d\n", err); -+ goto out; -+ } -+ } -+ } -+ -+ if (rx) { -+ len = xfer->len; -+ while (len-- > 0) { -+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD); -+ err = rt2880_spi_wait_ready(rs, 1); -+ if (err) { -+ dev_err(&spi->dev, "RX failed, err=%d\n", err); -+ goto out; -+ } -+ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA); -+ } -+ } -+ -+out: -+ return err; -+} -+ -+/* copy from spi.c */ -+static void spi_set_cs(struct spi_device *spi, bool enable) -+{ -+ if (spi->mode & SPI_CS_HIGH) -+ enable = !enable; -+ -+ if (spi->cs_gpio >= 0) -+ gpio_set_value(spi->cs_gpio, !enable); -+ else if (spi->master->set_cs) -+ spi->master->set_cs(spi, !enable); -+} -+ -+static int rt2880_spi_setup(struct spi_device *spi) -+{ -+ struct spi_master *master = spi->master; -+ struct rt2880_spi *rs = spi_master_get_devdata(master); -+ u32 reg, old_reg, arbit_off; -+ -+ if ((spi->max_speed_hz > master->max_speed_hz) || -+ (spi->max_speed_hz < master->min_speed_hz)) { -+ dev_err(&spi->dev, "invalide requested speed %d Hz\n", -+ spi->max_speed_hz); -+ return -EINVAL; -+ } -+ -+ if (!(master->bits_per_word_mask & -+ BIT(spi->bits_per_word - 1))) { -+ dev_err(&spi->dev, "invalide bits_per_word %d\n", -+ spi->bits_per_word); -+ return -EINVAL; -+ } -+ -+ /* the hardware seems can't work on mode0 force it to mode3 */ -+ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) { -+ dev_warn(&spi->dev, "force spi mode3\n"); -+ spi->mode |= SPI_MODE_3; -+ } -+ -+ /* chip polarity */ -+ arbit_off = get_arbiter_offset(master); -+ reg = old_reg = rt2880_spi_read(rs, arbit_off); -+ if (spi->mode & SPI_CS_HIGH) { -+ switch (master->bus_num) { -+ case 1: -+ reg |= SPI1_POR; -+ break; -+ default: -+ reg |= SPI0_POR; -+ break; -+ } -+ } else { -+ switch (master->bus_num) { -+ case 1: -+ reg &= ~SPI1_POR; -+ break; -+ default: -+ reg &= ~SPI0_POR; -+ break; -+ } -+ } -+ -+ /* enable spi1 */ -+ if (master->bus_num == 1) -+ reg |= SPICTL_ARB_EN; -+ -+ if (reg != old_reg) -+ rt2880_spi_write(rs, arbit_off, reg); -+ -+ /* deselected the spi device */ -+ spi_set_cs(spi, false); -+ -+ rt2880_dump_reg(master); -+ -+ return 0; -+} -+ -+static int rt2880_spi_prepare_message(struct spi_master *master, -+ struct spi_message *msg) -+{ -+ struct rt2880_spi *rs = spi_master_get_devdata(master); -+ struct spi_device *spi = msg->spi; -+ u32 reg; -+ -+ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz)) -+ return 0; -+ -+#if 0 -+ /* set spido to tri-state */ -+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO); -+#endif -+ -+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); -+ -+ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL | -+ SPICFG_RXCLKEDGE_FALLING | -+ SPICFG_TXCLKEDGE_FALLING | -+ SPICFG_SPICLK_PRESCALE_MASK); -+ -+ /* MSB */ -+ if (!(spi->mode & SPI_LSB_FIRST)) -+ reg |= SPICFG_MSBFIRST; -+ -+ /* spi mode */ -+ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { -+ case SPI_MODE_0: -+ reg |= SPICFG_TXCLKEDGE_FALLING; -+ break; -+ case SPI_MODE_1: -+ reg |= SPICFG_RXCLKEDGE_FALLING; -+ break; -+ case SPI_MODE_2: -+ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING; -+ break; -+ case SPI_MODE_3: -+ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING; -+ break; -+ } -+ rs->mode = spi->mode; -+ -+#if 0 -+ /* set spiclk and spiena to tri-state */ -+ reg |= SPICFG_HIZSPI; -+#endif -+ -+ /* clock divide */ -+ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz); -+ -+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); -+ -+ return 0; -+} -+ -+static int rt2880_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct rt2880_spi *rs; -+ void __iomem *base; -+ struct resource *r; -+ struct clk *clk; -+ int ret; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, r); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(clk)) { -+ dev_err(&pdev->dev, "unable to get SYS clock\n"); -+ return PTR_ERR(clk); -+ } -+ -+ ret = clk_prepare_enable(clk); -+ if (ret) -+ goto err_clk; -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(*rs)); -+ if (master == NULL) { -+ dev_dbg(&pdev->dev, "master allocation failed\n"); -+ ret = -ENOMEM; -+ goto err_clk; -+ } -+ -+ master->dev.of_node = pdev->dev.of_node; -+ master->mode_bits = RT2880_SPI_MODE_BITS; -+ master->bits_per_word_mask = SPI_BPW_MASK(8); -+ master->min_speed_hz = clk_get_rate(clk) / 128; -+ master->max_speed_hz = clk_get_rate(clk) / 2; -+ master->flags = SPI_MASTER_HALF_DUPLEX; -+ master->setup = rt2880_spi_setup; -+ master->prepare_message = rt2880_spi_prepare_message; -+ master->set_cs = rt2880_spi_set_cs; -+ master->transfer_one = rt2880_spi_transfer_one, -+ -+ dev_set_drvdata(&pdev->dev, master); -+ -+ rs = spi_master_get_devdata(master); -+ rs->master = master; -+ rs->base = base; -+ rs->clk = clk; -+ -+ if (atomic_inc_return(&hw_reset_count) == 1) -+ device_reset(&pdev->dev); -+ -+ ret = devm_spi_register_master(&pdev->dev, master); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "devm_spi_register_master error.\n"); -+ goto err_master; -+ } -+ -+ return ret; -+ -+err_master: -+ spi_master_put(master); -+ kfree(master); -+err_clk: -+ clk_disable_unprepare(clk); -+ -+ return ret; -+} -+ -+static int rt2880_spi_remove(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct rt2880_spi *rs; -+ -+ master = dev_get_drvdata(&pdev->dev); -+ rs = spi_master_get_devdata(master); -+ -+ clk_disable_unprepare(rs->clk); -+ atomic_dec(&hw_reset_count); -+ -+ return 0; -+} -+ -+MODULE_ALIAS("platform:" DRIVER_NAME); -+ -+static const struct of_device_id rt2880_spi_match[] = { -+ { .compatible = "ralink,rt2880-spi" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, rt2880_spi_match); -+ -+static struct platform_driver rt2880_spi_driver = { -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = rt2880_spi_match, -+ }, -+ .probe = rt2880_spi_probe, -+ .remove = rt2880_spi_remove, -+}; -+ -+module_platform_driver(rt2880_spi_driver); -+ -+MODULE_DESCRIPTION("Ralink SPI driver"); -+MODULE_AUTHOR("Sergiy "); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/ramips/patches-5.10/0044-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-5.10/0044-i2c-MIPS-adds-ralink-I2C-driver.patch deleted file mode 100644 index e3bb7f2488..0000000000 --- a/target/linux/ramips/patches-5.10/0044-i2c-MIPS-adds-ralink-I2C-driver.patch +++ /dev/null @@ -1,507 +0,0 @@ -From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 09:52:56 +0100 -Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver - -Signed-off-by: John Crispin ---- - .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++ - drivers/i2c/busses/Kconfig | 4 + - drivers/i2c/busses/Makefile | 1 + - drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++ - 4 files changed, 359 insertions(+) - create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt - create mode 100644 drivers/i2c/busses/i2c-ralink.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt -@@ -0,0 +1,27 @@ -+I2C for Ralink platforms -+ -+Required properties : -+- compatible : Must be "link,rt3052-i2c" -+- reg: physical base address of the controller and length of memory mapped -+ region. -+- #address-cells = <1>; -+- #size-cells = <0>; -+ -+Optional properties: -+- Child nodes conforming to i2c bus binding -+ -+Example : -+ -+palmbus@10000000 { -+ i2c@900 { -+ compatible = "link,rt3052-i2c"; -+ reg = <0x900 0x100>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hwmon@4b { -+ compatible = "national,lm92"; -+ reg = <0x4b>; -+ }; -+ }; -+}; ---- a/drivers/i2c/busses/Kconfig -+++ b/drivers/i2c/busses/Kconfig -@@ -922,6 +922,11 @@ config I2C_RK3X - This driver can also be built as a module. If so, the module will - be called i2c-rk3x. - -+config I2C_RALINK -+ tristate "Ralink I2C Controller" -+ depends on RALINK && !SOC_MT7621 -+ select OF_I2C -+ - config HAVE_S3C2410_I2C - bool - help ---- a/drivers/i2c/busses/Makefile -+++ b/drivers/i2c/busses/Makefile -@@ -91,6 +91,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o - obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o - obj-$(CONFIG_I2C_PXA) += i2c-pxa.o - obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o -+obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o - obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-geni.o - obj-$(CONFIG_I2C_QUP) += i2c-qup.o - obj-$(CONFIG_I2C_RIIC) += i2c-riic.o ---- /dev/null -+++ b/drivers/i2c/busses/i2c-ralink.c -@@ -0,0 +1,435 @@ -+/* -+ * drivers/i2c/busses/i2c-ralink.c -+ * -+ * Copyright (C) 2013 Steven Liu -+ * Copyright (C) 2016 Michael Lee -+ * -+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus. -+ * (C) 2014 Sittisak -+ * -+ * This software is licensed under the terms of the GNU General Public -+ * License version 2, as published by the Free Software Foundation, and -+ * may be copied, distributed, and modified under those terms. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define REG_CONFIG_REG 0x00 -+#define REG_CLKDIV_REG 0x04 -+#define REG_DEVADDR_REG 0x08 -+#define REG_ADDR_REG 0x0C -+#define REG_DATAOUT_REG 0x10 -+#define REG_DATAIN_REG 0x14 -+#define REG_STATUS_REG 0x18 -+#define REG_STARTXFR_REG 0x1C -+#define REG_BYTECNT_REG 0x20 -+ -+/* REG_CONFIG_REG */ -+#define I2C_ADDRLEN_OFFSET 5 -+#define I2C_DEVADLEN_OFFSET 2 -+#define I2C_ADDRLEN_MASK 0x3 -+#define I2C_ADDR_DIS BIT(1) -+#define I2C_DEVADDR_DIS BIT(0) -+#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET) -+#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET) -+#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7) -+ -+/* REG_CLKDIV_REG */ -+#define I2C_CLKDIV_MASK 0xffff -+ -+/* REG_DEVADDR_REG */ -+#define I2C_DEVADDR_MASK 0x7f -+ -+/* REG_ADDR_REG */ -+#define I2C_ADDR_MASK 0xff -+ -+/* REG_STATUS_REG */ -+#define I2C_STARTERR BIT(4) -+#define I2C_ACKERR BIT(3) -+#define I2C_DATARDY BIT(2) -+#define I2C_SDOEMPTY BIT(1) -+#define I2C_BUSY BIT(0) -+ -+/* REG_STARTXFR_REG */ -+#define NOSTOP_CMD BIT(2) -+#define NODATA_CMD BIT(1) -+#define READ_CMD BIT(0) -+ -+/* REG_BYTECNT_REG */ -+#define BYTECNT_MAX 64 -+#define SET_BYTECNT(x) (x - 1) -+ -+/* timeout waiting for I2C devices to respond (clock streching) */ -+#define TIMEOUT_MS 1000 -+#define DELAY_INTERVAL_US 100 -+ -+struct rt_i2c { -+ void __iomem *base; -+ struct clk *clk; -+ struct device *dev; -+ struct i2c_adapter adap; -+ u32 cur_clk; -+ u32 clk_div; -+ u32 flags; -+}; -+ -+static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg) -+{ -+ iowrite32(val, i2c->base + reg); -+} -+ -+static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg) -+{ -+ return ioread32(i2c->base + reg); -+} -+ -+static int poll_down_timeout(void __iomem *addr, u32 mask) -+{ -+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); -+ -+ do { -+ if (!(readl_relaxed(addr) & mask)) -+ return 0; -+ -+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); -+ } while (time_before(jiffies, timeout)); -+ -+ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0; -+} -+ -+static int rt_i2c_wait_idle(struct rt_i2c *i2c) -+{ -+ int ret; -+ -+ ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY); -+ if (ret < 0) -+ dev_dbg(i2c->dev, "idle err(%d)\n", ret); -+ -+ return ret; -+} -+ -+static int poll_up_timeout(void __iomem *addr, u32 mask) -+{ -+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); -+ u32 status; -+ -+ do { -+ status = readl_relaxed(addr); -+ -+ /* check error status */ -+ if (status & I2C_STARTERR) -+ return -EAGAIN; -+ else if (status & I2C_ACKERR) -+ return -ENXIO; -+ else if (status & mask) -+ return 0; -+ -+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); -+ } while (time_before(jiffies, timeout)); -+ -+ return -ETIMEDOUT; -+} -+ -+static int rt_i2c_wait_rx_done(struct rt_i2c *i2c) -+{ -+ int ret; -+ -+ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY); -+ if (ret < 0) -+ dev_dbg(i2c->dev, "rx err(%d)\n", ret); -+ -+ return ret; -+} -+ -+static int rt_i2c_wait_tx_done(struct rt_i2c *i2c) -+{ -+ int ret; -+ -+ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY); -+ if (ret < 0) -+ dev_dbg(i2c->dev, "tx err(%d)\n", ret); -+ -+ return ret; -+} -+ -+static void rt_i2c_reset(struct rt_i2c *i2c) -+{ -+ device_reset(i2c->adap.dev.parent); -+ barrier(); -+ rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG); -+} -+ -+static void rt_i2c_dump_reg(struct rt_i2c *i2c) -+{ -+ dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \ -+ "addr %08x, dataout %08x, datain %08x, " \ -+ "status %08x, startxfr %08x, bytecnt %08x\n", -+ rt_i2c_r32(i2c, REG_CONFIG_REG), -+ rt_i2c_r32(i2c, REG_CLKDIV_REG), -+ rt_i2c_r32(i2c, REG_DEVADDR_REG), -+ rt_i2c_r32(i2c, REG_ADDR_REG), -+ rt_i2c_r32(i2c, REG_DATAOUT_REG), -+ rt_i2c_r32(i2c, REG_DATAIN_REG), -+ rt_i2c_r32(i2c, REG_STATUS_REG), -+ rt_i2c_r32(i2c, REG_STARTXFR_REG), -+ rt_i2c_r32(i2c, REG_BYTECNT_REG)); -+} -+ -+static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, -+ int num) -+{ -+ struct rt_i2c *i2c; -+ struct i2c_msg *pmsg; -+ unsigned char addr; -+ int i, j, ret; -+ u32 cmd; -+ -+ i2c = i2c_get_adapdata(adap); -+ -+ for (i = 0; i < num; i++) { -+ pmsg = &msgs[i]; -+ if (i == (num - 1)) -+ cmd = 0; -+ else -+ cmd = NOSTOP_CMD; -+ -+ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n", -+ pmsg->addr, pmsg->len, pmsg->flags, -+ (cmd == 0)? 1 : 0); -+ -+ /* wait hardware idle */ -+ if ((ret = rt_i2c_wait_idle(i2c))) -+ goto err_timeout; -+ -+ if (pmsg->flags & I2C_M_TEN) { -+ rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG); -+ /* 10 bits address */ -+ addr = 0x78 | ((pmsg->addr >> 8) & 0x03); -+ rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK, -+ REG_DEVADDR_REG); -+ rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK, -+ REG_ADDR_REG); -+ } else { -+ rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS, -+ REG_CONFIG_REG); -+ /* 7 bits address */ -+ rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK, -+ REG_DEVADDR_REG); -+ } -+ -+ /* buffer length */ -+ if (pmsg->len == 0) -+ cmd |= NODATA_CMD; -+ else -+ rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len), -+ REG_BYTECNT_REG); -+ -+ j = 0; -+ if (pmsg->flags & I2C_M_RD) { -+ cmd |= READ_CMD; -+ /* start transfer */ -+ barrier(); -+ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG); -+ do { -+ /* wait */ -+ if ((ret = rt_i2c_wait_rx_done(i2c))) -+ goto err_timeout; -+ /* read data */ -+ if (pmsg->len) -+ pmsg->buf[j] = rt_i2c_r32(i2c, -+ REG_DATAIN_REG); -+ j++; -+ } while (j < pmsg->len); -+ } else { -+ do { -+ /* write data */ -+ if (pmsg->len) -+ rt_i2c_w32(i2c, pmsg->buf[j], -+ REG_DATAOUT_REG); -+ /* start transfer */ -+ if (j == 0) { -+ barrier(); -+ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG); -+ } -+ /* wait */ -+ if ((ret = rt_i2c_wait_tx_done(i2c))) -+ goto err_timeout; -+ j++; -+ } while (j < pmsg->len); -+ } -+ } -+ /* the return value is number of executed messages */ -+ ret = i; -+ -+ return ret; -+ -+err_timeout: -+ rt_i2c_dump_reg(i2c); -+ rt_i2c_reset(i2c); -+ return ret; -+} -+ -+static u32 rt_i2c_func(struct i2c_adapter *a) -+{ -+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; -+} -+ -+static const struct i2c_algorithm rt_i2c_algo = { -+ .master_xfer = rt_i2c_master_xfer, -+ .functionality = rt_i2c_func, -+}; -+ -+static const struct of_device_id i2c_rt_dt_ids[] = { -+ { .compatible = "ralink,rt2880-i2c" }, -+ { /* sentinel */ } -+}; -+ -+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids); -+ -+static struct i2c_adapter_quirks rt_i2c_quirks = { -+ .max_write_len = BYTECNT_MAX, -+ .max_read_len = BYTECNT_MAX, -+}; -+ -+static int rt_i2c_init(struct rt_i2c *i2c) -+{ -+ u32 reg; -+ -+ /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */ -+ i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) / -+ (2 * i2c->cur_clk); -+ if (i2c->clk_div < 8) -+ i2c->clk_div = 8; -+ if (i2c->clk_div > I2C_CLKDIV_MASK) -+ i2c->clk_div = I2C_CLKDIV_MASK; -+ -+ /* check support combinde/repeated start message */ -+ rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG); -+ reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD; -+ -+ rt_i2c_reset(i2c); -+ -+ return reg; -+} -+ -+static int rt_i2c_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct rt_i2c *i2c; -+ struct i2c_adapter *adap; -+ const struct of_device_id *match; -+ int ret, restart; -+ -+ match = of_match_device(i2c_rt_dt_ids, &pdev->dev); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no memory resource found\n"); -+ return -ENODEV; -+ } -+ -+ i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL); -+ if (!i2c) { -+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n"); -+ return -ENOMEM; -+ } -+ -+ i2c->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(i2c->base)) -+ return PTR_ERR(i2c->base); -+ -+ i2c->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(i2c->clk)) { -+ dev_err(&pdev->dev, "no clock defined\n"); -+ return -ENODEV; -+ } -+ clk_prepare_enable(i2c->clk); -+ i2c->dev = &pdev->dev; -+ -+ if (of_property_read_u32(pdev->dev.of_node, -+ "clock-frequency", &i2c->cur_clk)) -+ i2c->cur_clk = 100000; -+ -+ adap = &i2c->adap; -+ adap->owner = THIS_MODULE; -+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; -+ adap->algo = &rt_i2c_algo; -+ adap->retries = 3; -+ adap->dev.parent = &pdev->dev; -+ i2c_set_adapdata(adap, i2c); -+ adap->dev.of_node = pdev->dev.of_node; -+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); -+ adap->quirks = &rt_i2c_quirks; -+ -+ platform_set_drvdata(pdev, i2c); -+ -+ restart = rt_i2c_init(i2c); -+ -+ ret = i2c_add_adapter(adap); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "failed to add adapter\n"); -+ clk_disable_unprepare(i2c->clk); -+ return ret; -+ } -+ -+ dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n", -+ i2c->cur_clk/1000, restart ? "" : "not "); -+ -+ return ret; -+} -+ -+static int rt_i2c_remove(struct platform_device *pdev) -+{ -+ struct rt_i2c *i2c = platform_get_drvdata(pdev); -+ -+ i2c_del_adapter(&i2c->adap); -+ clk_disable_unprepare(i2c->clk); -+ -+ return 0; -+} -+ -+static struct platform_driver rt_i2c_driver = { -+ .probe = rt_i2c_probe, -+ .remove = rt_i2c_remove, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "i2c-ralink", -+ .of_match_table = i2c_rt_dt_ids, -+ }, -+}; -+ -+static int __init i2c_rt_init (void) -+{ -+ return platform_driver_register(&rt_i2c_driver); -+} -+subsys_initcall(i2c_rt_init); -+ -+static void __exit i2c_rt_exit (void) -+{ -+ platform_driver_unregister(&rt_i2c_driver); -+} -+module_exit(i2c_rt_exit); -+ -+MODULE_AUTHOR("Steven Liu "); -+MODULE_DESCRIPTION("Ralink I2c host driver"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:Ralink-I2C"); diff --git a/target/linux/ramips/patches-5.10/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-5.10/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch deleted file mode 100644 index f3912a1054..0000000000 --- a/target/linux/ramips/patches-5.10/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 13 Nov 2014 19:08:40 +0100 -Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC - -Signed-off-by: John Crispin ---- - drivers/mmc/host/Kconfig | 2 + - drivers/mmc/host/Makefile | 1 + - drivers/mmc/host/mtk-mmc/Kconfig | 16 + - drivers/mmc/host/mtk-mmc/Makefile | 42 + - drivers/mmc/host/mtk-mmc/board.h | 137 ++ - drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++ - drivers/mmc/host/mtk-mmc/dbg.h | 156 ++ - drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++ - drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++ - 9 files changed, 4762 insertions(+) - create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig - create mode 100644 drivers/mmc/host/mtk-mmc/Makefile - create mode 100644 drivers/mmc/host/mtk-mmc/board.h - create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c - create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h - create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h - create mode 100644 drivers/mmc/host/mtk-mmc/sd.c - ---- a/drivers/mmc/host/Kconfig -+++ b/drivers/mmc/host/Kconfig -@@ -1019,3 +1019,5 @@ config MMC_SDHCI_AM654 - If you have a controller with this interface, say Y or M here. - - If unsure, say N. -+ -+source "drivers/mmc/host/mtk-mmc/Kconfig" ---- a/drivers/mmc/host/Makefile -+++ b/drivers/mmc/host/Makefile -@@ -3,6 +3,7 @@ - # Makefile for MMC/SD host controller drivers - # - -+obj-$(CONFIG_MTK_MMC) += mtk-mmc/ - obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o - armmmci-y := mmci.o - armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o diff --git a/target/linux/ramips/patches-5.10/0048-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-5.10/0048-asoc-add-mt7620-support.patch deleted file mode 100644 index d0d4141a8d..0000000000 --- a/target/linux/ramips/patches-5.10/0048-asoc-add-mt7620-support.patch +++ /dev/null @@ -1,1046 +0,0 @@ -From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 09:31:47 +0100 -Subject: [PATCH 48/53] asoc: add mt7620 support - -Signed-off-by: John Crispin ---- - arch/mips/ralink/of.c | 2 + - sound/soc/Kconfig | 1 + - sound/soc/Makefile | 1 + - sound/soc/ralink/Kconfig | 15 ++ - sound/soc/ralink/Makefile | 11 + - sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++ - sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++ - 7 files changed, 699 insertions(+) - create mode 100644 sound/soc/ralink/Kconfig - create mode 100644 sound/soc/ralink/Makefile - create mode 100644 sound/soc/ralink/mt7620-i2s.c - create mode 100644 sound/soc/ralink/mt7620-wm8960.c - ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -24,6 +25,7 @@ - #include "common.h" - - __iomem void *rt_sysc_membase; -+EXPORT_SYMBOL(rt_sysc_membase); - __iomem void *rt_memc_membase; - - __iomem void *plat_of_remap_node(const char *node) ---- a/sound/soc/Kconfig -+++ b/sound/soc/Kconfig -@@ -60,6 +60,7 @@ source "sound/soc/mxs/Kconfig" - source "sound/soc/pxa/Kconfig" - source "sound/soc/qcom/Kconfig" - source "sound/soc/rockchip/Kconfig" -+source "sound/soc/ralink/Kconfig" - source "sound/soc/samsung/Kconfig" - source "sound/soc/sh/Kconfig" - source "sound/soc/sirf/Kconfig" ---- a/sound/soc/Makefile -+++ b/sound/soc/Makefile -@@ -43,6 +43,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/ - obj-$(CONFIG_SND_SOC) += pxa/ - obj-$(CONFIG_SND_SOC) += qcom/ - obj-$(CONFIG_SND_SOC) += rockchip/ -+obj-$(CONFIG_SND_SOC) += ralink/ - obj-$(CONFIG_SND_SOC) += samsung/ - obj-$(CONFIG_SND_SOC) += sh/ - obj-$(CONFIG_SND_SOC) += sirf/ ---- /dev/null -+++ b/sound/soc/ralink/Kconfig -@@ -0,0 +1,8 @@ -+config SND_RALINK_SOC_I2S -+ depends on RALINK && SND_SOC && !SOC_RT288X -+ select SND_SOC_GENERIC_DMAENGINE_PCM -+ select REGMAP_MMIO -+ tristate "SoC Audio (I2S protocol) for Ralink SoC" -+ help -+ Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek -+ based boards. ---- /dev/null -+++ b/sound/soc/ralink/Makefile -@@ -0,0 +1,6 @@ -+# -+# Ralink/MediaTek Platform Support -+# -+snd-soc-ralink-i2s-objs := ralink-i2s.o -+ -+obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o ---- /dev/null -+++ b/sound/soc/ralink/ralink-i2s.c -@@ -0,0 +1,965 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * Copyright (C) 2016 Michael Lee -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define DRV_NAME "ralink-i2s" -+ -+#define I2S_REG_CFG0 0x00 -+#define I2S_REG_INT_STATUS 0x04 -+#define I2S_REG_INT_EN 0x08 -+#define I2S_REG_FF_STATUS 0x0c -+#define I2S_REG_WREG 0x10 -+#define I2S_REG_RREG 0x14 -+#define I2S_REG_CFG1 0x18 -+#define I2S_REG_DIVCMP 0x20 -+#define I2S_REG_DIVINT 0x24 -+ -+/* I2S_REG_CFG0 */ -+#define I2S_REG_CFG0_EN BIT(31) -+#define I2S_REG_CFG0_DMA_EN BIT(30) -+#define I2S_REG_CFG0_BYTE_SWAP BIT(28) -+#define I2S_REG_CFG0_TX_EN BIT(24) -+#define I2S_REG_CFG0_RX_EN BIT(20) -+#define I2S_REG_CFG0_SLAVE BIT(16) -+#define I2S_REG_CFG0_RX_THRES 12 -+#define I2S_REG_CFG0_TX_THRES 4 -+#define I2S_REG_CFG0_THRES_MASK (0xf << I2S_REG_CFG0_RX_THRES) | \ -+ (4 << I2S_REG_CFG0_TX_THRES) -+#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \ -+ (4 << I2S_REG_CFG0_TX_THRES) -+/* RT305x */ -+#define I2S_REG_CFG0_CLK_DIS BIT(8) -+#define I2S_REG_CFG0_TXCH_SWAP BIT(3) -+#define I2S_REG_CFG0_TXCH1_OFF BIT(2) -+#define I2S_REG_CFG0_TXCH0_OFF BIT(1) -+#define I2S_REG_CFG0_SLAVE_EN BIT(0) -+/* RT3883 */ -+#define I2S_REG_CFG0_RXCH_SWAP BIT(11) -+#define I2S_REG_CFG0_RXCH1_OFF BIT(10) -+#define I2S_REG_CFG0_RXCH0_OFF BIT(9) -+#define I2S_REG_CFG0_WS_INV BIT(0) -+/* MT7628 */ -+#define I2S_REG_CFG0_FMT_LE BIT(29) -+#define I2S_REG_CFG0_SYS_BE BIT(28) -+#define I2S_REG_CFG0_NORM_24 BIT(18) -+#define I2S_REG_CFG0_DATA_24 BIT(17) -+ -+/* I2S_REG_INT_STATUS */ -+#define I2S_REG_INT_RX_FAULT BIT(7) -+#define I2S_REG_INT_RX_OVRUN BIT(6) -+#define I2S_REG_INT_RX_UNRUN BIT(5) -+#define I2S_REG_INT_RX_THRES BIT(4) -+#define I2S_REG_INT_TX_FAULT BIT(3) -+#define I2S_REG_INT_TX_OVRUN BIT(2) -+#define I2S_REG_INT_TX_UNRUN BIT(1) -+#define I2S_REG_INT_TX_THRES BIT(0) -+#define I2S_REG_INT_TX_MASK 0xf -+#define I2S_REG_INT_RX_MASK 0xf0 -+ -+/* I2S_REG_INT_STATUS */ -+#define I2S_RX_AVCNT(x) ((x >> 4) & 0xf) -+#define I2S_TX_AVCNT(x) (x & 0xf) -+/* MT7628 */ -+#define MT7628_I2S_RX_AVCNT(x) ((x >> 8) & 0x1f) -+#define MT7628_I2S_TX_AVCNT(x) (x & 0x1f) -+ -+/* I2S_REG_CFG1 */ -+#define I2S_REG_CFG1_LBK BIT(31) -+#define I2S_REG_CFG1_EXTLBK BIT(30) -+/* RT3883 */ -+#define I2S_REG_CFG1_LEFT_J BIT(0) -+#define I2S_REG_CFG1_RIGHT_J BIT(1) -+#define I2S_REG_CFG1_FMT_MASK 0x3 -+ -+/* I2S_REG_DIVCMP */ -+#define I2S_REG_DIVCMP_CLKEN BIT(31) -+#define I2S_REG_DIVCMP_DIVCOMP_MASK 0x1ff -+ -+/* I2S_REG_DIVINT */ -+#define I2S_REG_DIVINT_MASK 0x3ff -+ -+/* BCLK dividers */ -+#define RALINK_I2S_DIVCMP 0 -+#define RALINK_I2S_DIVINT 1 -+ -+/* FIFO */ -+#define RALINK_I2S_FIFO_SIZE 32 -+ -+/* feature flags */ -+#define RALINK_FLAGS_TXONLY BIT(0) -+#define RALINK_FLAGS_LEFT_J BIT(1) -+#define RALINK_FLAGS_RIGHT_J BIT(2) -+#define RALINK_FLAGS_ENDIAN BIT(3) -+#define RALINK_FLAGS_24BIT BIT(4) -+ -+#define RALINK_I2S_INT_EN 0 -+ -+struct ralink_i2s_stats { -+ u32 dmafault; -+ u32 overrun; -+ u32 underrun; -+ u32 belowthres; -+}; -+ -+struct ralink_i2s { -+ struct device *dev; -+ void __iomem *regs; -+ struct clk *clk; -+ struct regmap *regmap; -+ u32 flags; -+ unsigned int fmt; -+ u16 txdma_req; -+ u16 rxdma_req; -+ -+ struct snd_dmaengine_dai_dma_data playback_dma_data; -+ struct snd_dmaengine_dai_dma_data capture_dma_data; -+ -+ struct dentry *dbg_dir; -+ struct dentry *dbg_stats; -+ struct ralink_i2s_stats txstats; -+ struct ralink_i2s_stats rxstats; -+}; -+ -+static void ralink_i2s_dump_regs(struct ralink_i2s *i2s) -+{ -+ u32 buf[10]; -+ int ret; -+ -+ ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0, -+ buf, ARRAY_SIZE(buf)); -+ -+ dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \ -+ "FFSTAT: %08x, WREG: %08x, RREG: %08x, " \ -+ "CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n", -+ buf[0], buf[1], buf[2], buf[3], buf[4], -+ buf[5], buf[6], buf[8], buf[9]); -+} -+ -+static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai, -+ int clk_id, unsigned int freq, int dir) -+{ -+ return 0; -+} -+ -+static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ unsigned long clk = clk_get_rate(i2s->clk); -+ int div; -+ uint32_t data; -+ -+ /* disable clock at slave mode */ -+ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) == -+ SND_SOC_DAIFMT_CBM_CFM) { -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_CLK_DIS, -+ I2S_REG_CFG0_CLK_DIS); -+ return 0; -+ } -+ -+ /* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */ -+ div = (clk / rate ) - 1; -+ -+ data = rt_sysc_r32(0x30); -+ data &= (0xff << 8); -+ data |= (0x1 << 15) | (div << 8); -+ rt_sysc_w32(data, 0x30); -+ -+ /* enable clock */ -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0); -+ -+ dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n", -+ clk, rate, div); -+ -+ return 0; -+} -+ -+static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ unsigned long clk = clk_get_rate(i2s->clk); -+ int divint, divcomp; -+ -+ /* disable clock at slave mode */ -+ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) == -+ SND_SOC_DAIFMT_CBM_CFM) { -+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, -+ I2S_REG_DIVCMP_CLKEN, 0); -+ return 0; -+ } -+ -+ /* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */ -+ clk = clk / (2 * 2 * width); -+ divint = clk / rate; -+ divcomp = ((clk % rate) * 512) / rate; -+ -+ if ((divint > I2S_REG_DIVINT_MASK) || -+ (divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK)) -+ return -EINVAL; -+ -+ regmap_update_bits(i2s->regmap, I2S_REG_DIVINT, -+ I2S_REG_DIVINT_MASK, divint); -+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, -+ I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp); -+ -+ /* enable clock */ -+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN, -+ I2S_REG_DIVCMP_CLKEN); -+ -+ dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n", -+ clk_get_rate(i2s->clk), rate, divint, divcomp); -+ -+ return 0; -+} -+ -+static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ unsigned int cfg0 = 0, cfg1 = 0; -+ -+ /* set master/slave audio interface */ -+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { -+ case SND_SOC_DAIFMT_CBM_CFM: -+ if (i2s->flags & RALINK_FLAGS_TXONLY) -+ cfg0 |= I2S_REG_CFG0_SLAVE_EN; -+ else -+ cfg0 |= I2S_REG_CFG0_SLAVE; -+ break; -+ case SND_SOC_DAIFMT_CBS_CFS: -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ /* interface format */ -+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { -+ case SND_SOC_DAIFMT_I2S: -+ break; -+ case SND_SOC_DAIFMT_RIGHT_J: -+ if (i2s->flags & RALINK_FLAGS_RIGHT_J) { -+ cfg1 |= I2S_REG_CFG1_RIGHT_J; -+ break; -+ } -+ return -EINVAL; -+ case SND_SOC_DAIFMT_LEFT_J: -+ if (i2s->flags & RALINK_FLAGS_LEFT_J) { -+ cfg1 |= I2S_REG_CFG1_LEFT_J; -+ break; -+ } -+ return -EINVAL; -+ default: -+ return -EINVAL; -+ } -+ -+ /* clock inversion */ -+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { -+ case SND_SOC_DAIFMT_NB_NF: -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (i2s->flags & RALINK_FLAGS_TXONLY) { -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_SLAVE_EN, cfg0); -+ } else { -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_SLAVE, cfg0); -+ } -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG1, -+ I2S_REG_CFG1_FMT_MASK, cfg1); -+ i2s->fmt = fmt; -+ -+ return 0; -+} -+ -+static int ralink_i2s_startup(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ -+ if (dai->active) -+ return 0; -+ -+ /* setup status interrupt */ -+#if (RALINK_I2S_INT_EN) -+ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff); -+#else -+ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0); -+#endif -+ -+ /* enable */ -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN | -+ I2S_REG_CFG0_THRES_MASK, -+ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN | -+ I2S_REG_CFG0_DFT_THRES); -+ -+ return 0; -+} -+ -+static void ralink_i2s_shutdown(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ -+ /* If both streams are stopped, disable module and clock */ -+ if (dai->active) -+ return; -+ -+ /* -+ * datasheet mention when disable all control regs are cleared -+ * to initial values. need reinit at startup. -+ */ -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0); -+} -+ -+static int ralink_i2s_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ int width; -+ int ret; -+ -+ width = params_width(params); -+ switch (width) { -+ case 16: -+ if (i2s->flags & RALINK_FLAGS_24BIT) -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_DATA_24, 0); -+ break; -+ case 24: -+ if (i2s->flags & RALINK_FLAGS_24BIT) { -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_DATA_24, -+ I2S_REG_CFG0_DATA_24); -+ break; -+ } -+ return -EINVAL; -+ default: -+ return -EINVAL; -+ } -+ -+ switch (params_channels(params)) { -+ case 2: -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (i2s->flags & RALINK_FLAGS_ENDIAN) { -+ /* system endian */ -+#ifdef SNDRV_LITTLE_ENDIAN -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_SYS_BE, 0); -+#else -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_SYS_BE, -+ I2S_REG_CFG0_SYS_BE); -+#endif -+ -+ /* data endian */ -+ switch (params_format(params)) { -+ case SNDRV_PCM_FORMAT_S16_LE: -+ case SNDRV_PCM_FORMAT_S24_LE: -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_FMT_LE, -+ I2S_REG_CFG0_FMT_LE); -+ break; -+ case SNDRV_PCM_FORMAT_S16_BE: -+ case SNDRV_PCM_FORMAT_S24_BE: -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_FMT_LE, 0); -+ break; -+ default: -+ return -EINVAL; -+ } -+ } -+ -+ /* setup bclk rate */ -+ if (i2s->flags & RALINK_FLAGS_TXONLY) -+ ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params)); -+ else -+ ret = ralink_i2s_set_bclk(dai, width, params_rate(params)); -+ -+ return ret; -+} -+ -+static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd, -+ struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ unsigned int mask, val; -+ -+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) -+ mask = I2S_REG_CFG0_TX_EN; -+ else -+ mask = I2S_REG_CFG0_RX_EN; -+ -+ switch (cmd) { -+ case SNDRV_PCM_TRIGGER_START: -+ case SNDRV_PCM_TRIGGER_RESUME: -+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: -+ val = mask; -+ break; -+ case SNDRV_PCM_TRIGGER_STOP: -+ case SNDRV_PCM_TRIGGER_SUSPEND: -+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH: -+ val = 0; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val); -+ -+ return 0; -+} -+ -+static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s, -+ struct resource *res) -+{ -+ struct snd_dmaengine_dai_dma_data *dma_data; -+ -+ /* Playback */ -+ dma_data = &i2s->playback_dma_data; -+ dma_data->addr = res->start + I2S_REG_WREG; -+ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ dma_data->maxburst = 1; -+ dma_data->slave_id = i2s->txdma_req; -+ -+ if (i2s->flags & RALINK_FLAGS_TXONLY) -+ return; -+ -+ /* Capture */ -+ dma_data = &i2s->capture_dma_data; -+ dma_data->addr = res->start + I2S_REG_RREG; -+ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ dma_data->maxburst = 1; -+ dma_data->slave_id = i2s->rxdma_req; -+} -+ -+static int ralink_i2s_dai_probe(struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ -+ snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data, -+ &i2s->capture_dma_data); -+ -+ return 0; -+} -+ -+static int ralink_i2s_dai_remove(struct snd_soc_dai *dai) -+{ -+ return 0; -+} -+ -+static const struct snd_soc_dai_ops ralink_i2s_dai_ops = { -+ .set_sysclk = ralink_i2s_set_sysclk, -+ .set_fmt = ralink_i2s_set_fmt, -+ .startup = ralink_i2s_startup, -+ .shutdown = ralink_i2s_shutdown, -+ .hw_params = ralink_i2s_hw_params, -+ .trigger = ralink_i2s_trigger, -+}; -+ -+static struct snd_soc_dai_driver ralink_i2s_dai = { -+ .name = DRV_NAME, -+ .probe = ralink_i2s_dai_probe, -+ .remove = ralink_i2s_dai_remove, -+ .ops = &ralink_i2s_dai_ops, -+ .capture = { -+ .stream_name = "I2S Capture", -+ .channels_min = 2, -+ .channels_max = 2, -+ .rate_min = 5512, -+ .rate_max = 192000, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE, -+ }, -+ .playback = { -+ .stream_name = "I2S Playback", -+ .channels_min = 2, -+ .channels_max = 2, -+ .rate_min = 5512, -+ .rate_max = 192000, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE, -+ }, -+ .symmetric_rates = 1, -+}; -+ -+static struct snd_pcm_hardware ralink_pcm_hardware = { -+ .info = SNDRV_PCM_INFO_MMAP | -+ SNDRV_PCM_INFO_MMAP_VALID | -+ SNDRV_PCM_INFO_INTERLEAVED | -+ SNDRV_PCM_INFO_BLOCK_TRANSFER, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE, -+ .channels_min = 2, -+ .channels_max = 2, -+ .period_bytes_min = PAGE_SIZE, -+ .period_bytes_max = PAGE_SIZE * 2, -+ .periods_min = 2, -+ .periods_max = 128, -+ .buffer_bytes_max = 128 * 1024, -+ .fifo_size = RALINK_I2S_FIFO_SIZE, -+}; -+ -+static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = { -+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, -+ .pcm_hardware = &ralink_pcm_hardware, -+ .prealloc_buffer_size = 256 * PAGE_SIZE, -+}; -+ -+static const struct snd_soc_component_driver ralink_i2s_component = { -+ .name = DRV_NAME, -+}; -+ -+static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg) -+{ -+ return true; -+} -+ -+static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg) -+{ -+ switch (reg) { -+ case I2S_REG_INT_STATUS: -+ case I2S_REG_FF_STATUS: -+ return true; -+ } -+ return false; -+} -+ -+static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg) -+{ -+ switch (reg) { -+ case I2S_REG_FF_STATUS: -+ case I2S_REG_RREG: -+ return false; -+ } -+ return true; -+} -+ -+static const struct regmap_config ralink_i2s_regmap_config = { -+ .reg_bits = 32, -+ .reg_stride = 4, -+ .val_bits = 32, -+ .writeable_reg = ralink_i2s_writeable_reg, -+ .readable_reg = ralink_i2s_readable_reg, -+ .volatile_reg = ralink_i2s_volatile_reg, -+ .max_register = I2S_REG_DIVINT, -+}; -+ -+#if (RALINK_I2S_INT_EN) -+static irqreturn_t ralink_i2s_irq(int irq, void *devid) -+{ -+ struct ralink_i2s *i2s = devid; -+ u32 status; -+ -+ regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status); -+ if (unlikely(!status)) -+ return IRQ_NONE; -+ -+ /* tx stats */ -+ if (status & I2S_REG_INT_TX_MASK) { -+ if (status & I2S_REG_INT_TX_THRES) -+ i2s->txstats.belowthres++; -+ if (status & I2S_REG_INT_TX_UNRUN) -+ i2s->txstats.underrun++; -+ if (status & I2S_REG_INT_TX_OVRUN) -+ i2s->txstats.overrun++; -+ if (status & I2S_REG_INT_TX_FAULT) -+ i2s->txstats.dmafault++; -+ } -+ -+ /* rx stats */ -+ if (status & I2S_REG_INT_RX_MASK) { -+ if (status & I2S_REG_INT_RX_THRES) -+ i2s->rxstats.belowthres++; -+ if (status & I2S_REG_INT_RX_UNRUN) -+ i2s->rxstats.underrun++; -+ if (status & I2S_REG_INT_RX_OVRUN) -+ i2s->rxstats.overrun++; -+ if (status & I2S_REG_INT_RX_FAULT) -+ i2s->rxstats.dmafault++; -+ } -+ -+ /* clean status bits */ -+ regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status); -+ -+ return IRQ_HANDLED; -+} -+#endif -+ -+#if IS_ENABLED(CONFIG_DEBUG_FS) -+static int ralink_i2s_stats_show(struct seq_file *s, void *unused) -+{ -+ struct ralink_i2s *i2s = s->private; -+ -+ seq_printf(s, "tx stats\n"); -+ seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres); -+ seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun); -+ seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun); -+ seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault); -+ -+ seq_printf(s, "rx stats\n"); -+ seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres); -+ seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun); -+ seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun); -+ seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault); -+ -+ ralink_i2s_dump_regs(i2s); -+ -+ return 0; -+} -+ -+static int ralink_i2s_stats_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, ralink_i2s_stats_show, inode->i_private); -+} -+ -+static const struct file_operations ralink_i2s_stats_ops = { -+ .open = ralink_i2s_stats_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s) -+{ -+ i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL); -+ if (!i2s->dbg_dir) -+ return -ENOMEM; -+ -+ i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO, -+ i2s->dbg_dir, i2s, &ralink_i2s_stats_ops); -+ if (!i2s->dbg_stats) { -+ debugfs_remove(i2s->dbg_dir); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s) -+{ -+ debugfs_remove(i2s->dbg_stats); -+ debugfs_remove(i2s->dbg_dir); -+} -+#else -+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s) -+{ -+ return 0; -+} -+ -+static inline void ralink_i2s_debugfs_remove(struct fsl_ssi_dbg *ssi_dbg) -+{ -+} -+#endif -+ -+/* -+ * TODO: these refclk setup functions should use -+ * clock framework instead. hardcode it now. -+ */ -+static void rt3350_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data |= (0x1 << 8); -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void rt3883_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0x3 << 13); -+ data |= (0x1 << 13); -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void rt3552_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0xf << 8); -+ data |= (0x3 << 8); -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void mt7620_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0x7 << 9); -+ data |= 0x1 << 9; -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void mt7621_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0x1f << 18); -+ data |= (0x19 << 18); -+ data &= ~(0x1f << 12); -+ data |= (0x1 << 12); -+ data &= ~(0x7 << 9); -+ data |= (0x5 << 9); -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void mt7628_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set i2s and refclk digital pad */ -+ data = rt_sysc_r32(0x3c); -+ data |= 0x1f; -+ rt_sysc_w32(data, 0x3c); -+ -+ /* Adjust REFCLK0's driving strength */ -+ data = rt_sysc_r32(0x1354); -+ data &= ~(0x1 << 5); -+ rt_sysc_w32(data, 0x1354); -+ data = rt_sysc_r32(0x1364); -+ data |= ~(0x1 << 5); -+ rt_sysc_w32(data, 0x1364); -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0x7 << 9); -+ data |= 0x1 << 9; -+ rt_sysc_w32(data, 0x2c); -+} -+ -+struct rt_i2s_data { -+ u32 flags; -+ void (*refclk_setup)(void); -+}; -+ -+struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY }; -+struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY, -+ .refclk_setup = rt3350_refclk_setup }; -+struct rt_i2s_data rt3883_i2s_data = { -+ .flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J), -+ .refclk_setup = rt3883_refclk_setup }; -+struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup}; -+struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup}; -+struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup}; -+struct rt_i2s_data mt7628_i2s_data = { -+ .flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT | -+ RALINK_FLAGS_LEFT_J), -+ .refclk_setup = mt7628_refclk_setup}; -+ -+static const struct of_device_id ralink_i2s_match_table[] = { -+ { .compatible = "ralink,rt3050-i2s", -+ .data = (void *)&rt3050_i2s_data }, -+ { .compatible = "ralink,rt3350-i2s", -+ .data = (void *)&rt3350_i2s_data }, -+ { .compatible = "ralink,rt3883-i2s", -+ .data = (void *)&rt3883_i2s_data }, -+ { .compatible = "ralink,rt3352-i2s", -+ .data = (void *)&rt3352_i2s_data }, -+ { .compatible = "mediatek,mt7620-i2s", -+ .data = (void *)&mt7620_i2s_data }, -+ { .compatible = "mediatek,mt7621-i2s", -+ .data = (void *)&mt7621_i2s_data }, -+ { .compatible = "mediatek,mt7628-i2s", -+ .data = (void *)&mt7628_i2s_data }, -+}; -+MODULE_DEVICE_TABLE(of, ralink_i2s_match_table); -+ -+static int ralink_i2s_probe(struct platform_device *pdev) -+{ -+ const struct of_device_id *match; -+ struct device_node *np = pdev->dev.of_node; -+ struct ralink_i2s *i2s; -+ struct resource *res; -+ int irq, ret; -+ u32 dma_req; -+ struct rt_i2s_data *data; -+ -+ i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL); -+ if (!i2s) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, i2s); -+ i2s->dev = &pdev->dev; -+ -+ match = of_match_device(ralink_i2s_match_table, &pdev->dev); -+ if (!match) -+ return -EINVAL; -+ data = (struct rt_i2s_data *)match->data; -+ i2s->flags = data->flags; -+ /* setup out 12Mhz refclk to codec as mclk */ -+ if (data->refclk_setup) -+ data->refclk_setup(); -+ -+ if (of_property_read_u32(np, "txdma-req", &dma_req)) { -+ dev_err(&pdev->dev, "no txdma-req define\n"); -+ return -EINVAL; -+ } -+ i2s->txdma_req = (u16)dma_req; -+ if (!(i2s->flags & RALINK_FLAGS_TXONLY)) { -+ if (of_property_read_u32(np, "rxdma-req", &dma_req)) { -+ dev_err(&pdev->dev, "no rxdma-req define\n"); -+ return -EINVAL; -+ } -+ i2s->rxdma_req = (u16)dma_req; -+ } -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ i2s->regs = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(i2s->regs)) -+ return PTR_ERR(i2s->regs); -+ -+ i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs, -+ &ralink_i2s_regmap_config); -+ if (IS_ERR(i2s->regmap)) { -+ dev_err(&pdev->dev, "regmap init failed\n"); -+ return PTR_ERR(i2s->regmap); -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(&pdev->dev, "failed to get irq\n"); -+ return -EINVAL; -+ } -+ -+#if (RALINK_I2S_INT_EN) -+ ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq, -+ 0, dev_name(&pdev->dev), i2s); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to request irq\n"); -+ return ret; -+ } -+#endif -+ -+ i2s->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(i2s->clk)) { -+ dev_err(&pdev->dev, "no clock defined\n"); -+ return PTR_ERR(i2s->clk); -+ } -+ -+ ret = clk_prepare_enable(i2s->clk); -+ if (ret) -+ return ret; -+ -+ ralink_i2s_init_dma_data(i2s, res); -+ -+ device_reset(&pdev->dev); -+ -+ ret = ralink_i2s_debugfs_create(i2s); -+ if (ret) { -+ dev_err(&pdev->dev, "create debugfs failed\n"); -+ goto err_clk_disable; -+ } -+ -+ /* enable 24bits support */ -+ if (i2s->flags & RALINK_FLAGS_24BIT) { -+ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE; -+ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE; -+ } -+ -+ /* enable big endian support */ -+ if (i2s->flags & RALINK_FLAGS_ENDIAN) { -+ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE; -+ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE; -+ ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE; -+ if (i2s->flags & RALINK_FLAGS_24BIT) { -+ ralink_i2s_dai.capture.formats |= -+ SNDRV_PCM_FMTBIT_S24_BE; -+ ralink_i2s_dai.playback.formats |= -+ SNDRV_PCM_FMTBIT_S24_BE; -+ ralink_pcm_hardware.formats |= -+ SNDRV_PCM_FMTBIT_S24_BE; -+ } -+ } -+ -+ /* disable capture support */ -+ if (i2s->flags & RALINK_FLAGS_TXONLY) -+ memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture), -+ 0); -+ -+ ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component, -+ &ralink_i2s_dai, 1); -+ if (ret) -+ goto err_debugfs; -+ -+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, -+ &ralink_dmaengine_pcm_config, -+ SND_DMAENGINE_PCM_FLAG_COMPAT); -+ if (ret) -+ goto err_debugfs; -+ -+ dev_info(i2s->dev, "mclk %luMHz\n", clk_get_rate(i2s->clk) / 1000000); -+ -+ return 0; -+ -+err_debugfs: -+ ralink_i2s_debugfs_remove(i2s); -+ -+err_clk_disable: -+ clk_disable_unprepare(i2s->clk); -+ -+ return ret; -+} -+ -+static int ralink_i2s_remove(struct platform_device *pdev) -+{ -+ struct ralink_i2s *i2s = platform_get_drvdata(pdev); -+ -+ ralink_i2s_debugfs_remove(i2s); -+ clk_disable_unprepare(i2s->clk); -+ -+ return 0; -+} -+ -+static struct platform_driver ralink_i2s_driver = { -+ .probe = ralink_i2s_probe, -+ .remove = ralink_i2s_remove, -+ .driver = { -+ .name = DRV_NAME, -+ .of_match_table = ralink_i2s_match_table, -+ }, -+}; -+module_platform_driver(ralink_i2s_driver); -+ -+MODULE_AUTHOR("Lars-Peter Clausen, "); -+MODULE_DESCRIPTION("Ralink/MediaTek I2S driver"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:" DRV_NAME); diff --git a/target/linux/ramips/patches-5.10/0051-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-5.10/0051-serial-add-ugly-custom-baud-rate-hack.patch deleted file mode 100644 index 4822226610..0000000000 --- a/target/linux/ramips/patches-5.10/0051-serial-add-ugly-custom-baud-rate-hack.patch +++ /dev/null @@ -1,22 +0,0 @@ -From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 7 Dec 2015 17:31:08 +0100 -Subject: [PATCH 51/53] serial: add ugly custom baud rate hack - -Signed-off-by: John Crispin ---- - drivers/tty/serial/serial_core.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/tty/serial/serial_core.c -+++ b/drivers/tty/serial/serial_core.c -@@ -416,6 +416,9 @@ uart_get_baud_rate(struct uart_port *por - break; - } - -+ if (tty_termios_baud_rate(termios) == 2500000) -+ return 250000; -+ - for (try = 0; try < 2; try++) { - baud = tty_termios_baud_rate(termios); - diff --git a/target/linux/ramips/patches-5.10/0052-pwm-add-mediatek-support.patch b/target/linux/ramips/patches-5.10/0052-pwm-add-mediatek-support.patch deleted file mode 100644 index d2c5724c06..0000000000 --- a/target/linux/ramips/patches-5.10/0052-pwm-add-mediatek-support.patch +++ /dev/null @@ -1,217 +0,0 @@ -From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 7 Dec 2015 17:16:50 +0100 -Subject: [PATCH 52/53] pwm: add mediatek support - -Signed-off-by: John Crispin ---- - drivers/pwm/Kconfig | 9 +++ - drivers/pwm/Makefile | 1 + - drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 183 insertions(+) - create mode 100644 drivers/pwm/pwm-mediatek.c - ---- a/drivers/pwm/Kconfig -+++ b/drivers/pwm/Kconfig -@@ -316,6 +316,15 @@ config PWM_MEDIATEK - To compile this driver as a module, choose M here: the module - will be called pwm-mediatek. - -+config PWM_MEDIATEK_RAMIPS -+ tristate "Mediatek PWM support" -+ depends on RALINK && OF -+ help -+ Generic PWM framework driver for Mediatek ARM SoC. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called pwm-mxs. -+ - config PWM_MXS - tristate "Freescale MXS PWM support" - depends on ARCH_MXS && OF ---- a/drivers/pwm/Makefile -+++ b/drivers/pwm/Makefile -@@ -29,6 +29,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p - obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o - obj-$(CONFIG_PWM_MESON) += pwm-meson.o - obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o -+obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o - obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o - obj-$(CONFIG_PWM_MXS) += pwm-mxs.o - obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o ---- /dev/null -+++ b/drivers/pwm/pwm-mediatek-ramips.c -@@ -0,0 +1,173 @@ -+/* -+ * Mediatek Pulse Width Modulator driver -+ * -+ * Copyright (C) 2015 John Crispin -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define NUM_PWM 4 -+ -+/* PWM registers and bits definitions */ -+#define PWMCON 0x00 -+#define PWMHDUR 0x04 -+#define PWMLDUR 0x08 -+#define PWMGDUR 0x0c -+#define PWMWAVENUM 0x28 -+#define PWMDWIDTH 0x2c -+#define PWMTHRES 0x30 -+ -+/** -+ * struct mtk_pwm_chip - struct representing pwm chip -+ * -+ * @mmio_base: base address of pwm chip -+ * @chip: linux pwm chip representation -+ */ -+struct mtk_pwm_chip { -+ void __iomem *mmio_base; -+ struct pwm_chip chip; -+}; -+ -+static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip) -+{ -+ return container_of(chip, struct mtk_pwm_chip, chip); -+} -+ -+static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num, -+ unsigned long offset) -+{ -+ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset); -+} -+ -+static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip, -+ unsigned int num, unsigned long offset, -+ unsigned long val) -+{ -+ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset); -+} -+ -+static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, -+ int duty_ns, int period_ns) -+{ -+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); -+ u32 resolution = 100 / 4; -+ u32 clkdiv = 0; -+ -+ while (period_ns / resolution > 8191) { -+ clkdiv++; -+ resolution *= 2; -+ } -+ -+ if (clkdiv > 7) -+ return -1; -+ -+ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv); -+ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution); -+ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution); -+ return 0; -+} -+ -+static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) -+{ -+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); -+ u32 val; -+ -+ val = ioread32(pc->mmio_base); -+ val |= BIT(pwm->hwpwm); -+ iowrite32(val, pc->mmio_base); -+ -+ return 0; -+} -+ -+static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) -+{ -+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); -+ u32 val; -+ -+ val = ioread32(pc->mmio_base); -+ val &= ~BIT(pwm->hwpwm); -+ iowrite32(val, pc->mmio_base); -+} -+ -+static const struct pwm_ops mtk_pwm_ops = { -+ .config = mtk_pwm_config, -+ .enable = mtk_pwm_enable, -+ .disable = mtk_pwm_disable, -+ .owner = THIS_MODULE, -+}; -+ -+static int mtk_pwm_probe(struct platform_device *pdev) -+{ -+ struct mtk_pwm_chip *pc; -+ struct resource *r; -+ int ret; -+ -+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); -+ if (!pc) -+ return -ENOMEM; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); -+ if (IS_ERR(pc->mmio_base)) -+ return PTR_ERR(pc->mmio_base); -+ -+ platform_set_drvdata(pdev, pc); -+ -+ pc->chip.dev = &pdev->dev; -+ pc->chip.ops = &mtk_pwm_ops; -+ pc->chip.base = -1; -+ pc->chip.npwm = NUM_PWM; -+ -+ ret = pwmchip_add(&pc->chip); -+ if (ret < 0) -+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int mtk_pwm_remove(struct platform_device *pdev) -+{ -+ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev); -+ int i; -+ -+ for (i = 0; i < NUM_PWM; i++) -+ pwm_disable(&pc->chip.pwms[i]); -+ -+ return pwmchip_remove(&pc->chip); -+} -+ -+static const struct of_device_id mtk_pwm_of_match[] = { -+ { .compatible = "mediatek,mt7628-pwm" }, -+ { } -+}; -+ -+MODULE_DEVICE_TABLE(of, mtk_pwm_of_match); -+ -+static struct platform_driver mtk_pwm_driver = { -+ .driver = { -+ .name = "mtk-pwm", -+ .owner = THIS_MODULE, -+ .of_match_table = mtk_pwm_of_match, -+ }, -+ .probe = mtk_pwm_probe, -+ .remove = mtk_pwm_remove, -+}; -+ -+module_platform_driver(mtk_pwm_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("John Crispin "); -+MODULE_ALIAS("platform:mtk-pwm"); diff --git a/target/linux/ramips/patches-5.10/0069-awake-rt305x-dwc2-controller.patch b/target/linux/ramips/patches-5.10/0069-awake-rt305x-dwc2-controller.patch deleted file mode 100644 index 7110a5b808..0000000000 --- a/target/linux/ramips/patches-5.10/0069-awake-rt305x-dwc2-controller.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -431,6 +431,12 @@ static int dwc2_driver_probe(struct plat - if (retval) - return retval; - -+ /* Enable USB port before any regs access */ -+ if (readl(hsotg->regs + PCGCTL) & 0x0f) { -+ writel(0x00, hsotg->regs + PCGCTL); -+ /* TODO: mdelay(25) here? vendor driver don't use it */ -+ } -+ - hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg); - - retval = dwc2_get_dr_mode(hsotg); diff --git a/target/linux/ramips/patches-5.10/0070-weak_reordering.patch b/target/linux/ramips/patches-5.10/0070-weak_reordering.patch deleted file mode 100644 index fe3fdec289..0000000000 --- a/target/linux/ramips/patches-5.10/0070-weak_reordering.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -57,6 +57,7 @@ choice - select COMMON_CLK - select CLKSRC_MIPS_GIC - select HAVE_PCI if PCI_MT7621 -+ select WEAK_REORDERING_BEYOND_LLSC - endchoice - - choice diff --git a/target/linux/ramips/patches-5.10/0123-mips-ralink-manage-low-reset-lines.patch b/target/linux/ramips/patches-5.10/0123-mips-ralink-manage-low-reset-lines.patch deleted file mode 100644 index bdf98f223c..0000000000 --- a/target/linux/ramips/patches-5.10/0123-mips-ralink-manage-low-reset-lines.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 3f9ef7785a9cd69cb75f5e2ea4ca79a24752e496 Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Wed, 3 Feb 2021 10:21:41 +0100 -Subject: MIPS: ralink: manage low reset lines - -Reset lines with indices smaller than 8 are currently considered invalid -by the rt2880-reset reset controller. - -The MT7621 SoC uses a number of these low reset lines. The DTS defines -reset lines "hsdma", "fe", and "mcm" with respective values 5, 6, and 2. -As a result of the above restriction, these resets cannot be asserted or -de-asserted by the reset controller. In cases where the bootloader does -not de-assert these lines, this results in e.g. the MT7621's internal -switch staying in reset. - -Change the reset controller to only ignore the system reset, so all -reset lines with index greater than 0 are considered valid. - -Signed-off-by: Sander Vanheule -Acked-by: John Crispin -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/ralink/reset.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ralink/reset.c -+++ b/arch/mips/ralink/reset.c -@@ -27,7 +27,7 @@ static int ralink_assert_device(struct r - { - u32 val; - -- if (id < 8) -+ if (id == 0) - return -1; - - val = rt_sysc_r32(SYSC_REG_RESET_CTRL); -@@ -42,7 +42,7 @@ static int ralink_deassert_device(struct - { - u32 val; - -- if (id < 8) -+ if (id == 0) - return -1; - - val = rt_sysc_r32(SYSC_REG_RESET_CTRL); diff --git a/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch b/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch new file mode 100644 index 0000000000..bdf98f223c --- /dev/null +++ b/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch @@ -0,0 +1,45 @@ +From 3f9ef7785a9cd69cb75f5e2ea4ca79a24752e496 Mon Sep 17 00:00:00 2001 +From: Sander Vanheule +Date: Wed, 3 Feb 2021 10:21:41 +0100 +Subject: MIPS: ralink: manage low reset lines + +Reset lines with indices smaller than 8 are currently considered invalid +by the rt2880-reset reset controller. + +The MT7621 SoC uses a number of these low reset lines. The DTS defines +reset lines "hsdma", "fe", and "mcm" with respective values 5, 6, and 2. +As a result of the above restriction, these resets cannot be asserted or +de-asserted by the reset controller. In cases where the bootloader does +not de-assert these lines, this results in e.g. the MT7621's internal +switch staying in reset. + +Change the reset controller to only ignore the system reset, so all +reset lines with index greater than 0 are considered valid. + +Signed-off-by: Sander Vanheule +Acked-by: John Crispin +Signed-off-by: Thomas Bogendoerfer +--- + arch/mips/ralink/reset.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/mips/ralink/reset.c ++++ b/arch/mips/ralink/reset.c +@@ -27,7 +27,7 @@ static int ralink_assert_device(struct r + { + u32 val; + +- if (id < 8) ++ if (id == 0) + return -1; + + val = rt_sysc_r32(SYSC_REG_RESET_CTRL); +@@ -42,7 +42,7 @@ static int ralink_deassert_device(struct + { + u32 val; + +- if (id < 8) ++ if (id == 0) + return -1; + + val = rt_sysc_r32(SYSC_REG_RESET_CTRL); diff --git a/target/linux/ramips/patches-5.10/0200-linkit_bootstrap.patch b/target/linux/ramips/patches-5.10/0200-linkit_bootstrap.patch deleted file mode 100644 index 9142faaf43..0000000000 --- a/target/linux/ramips/patches-5.10/0200-linkit_bootstrap.patch +++ /dev/null @@ -1,97 +0,0 @@ ---- a/drivers/misc/Makefile -+++ b/drivers/misc/Makefile -@@ -52,6 +52,7 @@ obj-$(CONFIG_ECHO) += echo/ - obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o - obj-$(CONFIG_CXL_BASE) += cxl/ - obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o -+obj-$(CONFIG_SOC_MT7620) += linkit.o - obj-$(CONFIG_OCXL) += ocxl/ - obj-y += cardreader/ - obj-$(CONFIG_PVPANIC) += pvpanic.o ---- /dev/null -+++ b/drivers/misc/linkit.c -@@ -0,0 +1,84 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * publishhed by the Free Software Foundation. -+ * -+ * Copyright (C) 2015 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#define LINKIT_LATCH_GPIO 11 -+ -+struct linkit_hw_data { -+ char board[16]; -+ char rev[16]; -+}; -+ -+static void sanify_string(char *s) -+{ -+ int i; -+ -+ for (i = 0; i < 15; i++) -+ if (s[i] <= 0x20) -+ s[i] = '\0'; -+ s[15] = '\0'; -+} -+ -+static int linkit_probe(struct platform_device *pdev) -+{ -+ struct linkit_hw_data hw; -+ struct mtd_info *mtd; -+ size_t retlen; -+ int ret; -+ -+ mtd = get_mtd_device_nm("factory"); -+ if (IS_ERR(mtd)) -+ return PTR_ERR(mtd); -+ -+ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw); -+ put_mtd_device(mtd); -+ -+ sanify_string(hw.board); -+ sanify_string(hw.rev); -+ -+ dev_info(&pdev->dev, "Version : %s\n", hw.board); -+ dev_info(&pdev->dev, "Revision : %s\n", hw.rev); -+ -+ if (!strcmp(hw.board, "LINKITS7688")) { -+ dev_info(&pdev->dev, "setting up bootstrap latch\n"); -+ -+ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) { -+ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n"); -+ return -1; -+ } -+ gpio_direction_output(LINKIT_LATCH_GPIO, 0); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id linkit_match[] = { -+ { .compatible = "mediatek,linkit" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, linkit_match); -+ -+static struct platform_driver linkit_driver = { -+ .probe = linkit_probe, -+ .driver = { -+ .name = "mtk-linkit", -+ .owner = THIS_MODULE, -+ .of_match_table = linkit_match, -+ }, -+}; -+ -+int __init linkit_init(void) -+{ -+ return platform_driver_register(&linkit_driver); -+} -+late_initcall_sync(linkit_init); diff --git a/target/linux/ramips/patches-5.10/0300-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch b/target/linux/ramips/patches-5.10/0300-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch deleted file mode 100644 index ba844fed0f..0000000000 --- a/target/linux/ramips/patches-5.10/0300-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch +++ /dev/null @@ -1,1400 +0,0 @@ -From e84e2430ee0e483842b4ff013ae8a6e7e2fa2734 Mon Sep 17 00:00:00 2001 -From: Weijie Gao -Date: Wed, 1 Apr 2020 02:07:58 +0800 -Subject: [PATCH 1/2] mtd: rawnand: add driver support for MT7621 nand - flash controller - -This patch adds NAND flash controller driver for MediaTek MT7621 SoC. - -The NAND flash controller is similar with controllers described in -mtk_nand.c, except that the controller from MT7621 doesn't support DMA -transmission, and some registers' offset and fields are different. - -Signed-off-by: Weijie Gao ---- - drivers/mtd/nand/raw/Kconfig | 8 + - drivers/mtd/nand/raw/Makefile | 1 + - drivers/mtd/nand/raw/mt7621_nand.c | 1348 ++++++++++++++++++++++++++++++++++++ - 3 files changed, 1357 insertions(+) - create mode 100644 drivers/mtd/nand/raw/mt7621_nand.c - ---- a/drivers/mtd/nand/raw/Kconfig -+++ b/drivers/mtd/nand/raw/Kconfig -@@ -391,6 +391,14 @@ config MTD_NAND_QCOM - Enables support for NAND flash chips on SoCs containing the EBI2 NAND - controller. This controller is found on IPQ806x SoC. - -+config MTD_NAND_MT7621 -+ tristate "MT7621 NAND controller" -+ depends on SOC_MT7621 || COMPILE_TEST -+ depends on HAS_IOMEM -+ help -+ Enables support for NAND controller on MT7621 SoC. -+ This driver uses PIO mode for data transmission instead of DMA mode. -+ - config MTD_NAND_MTK - tristate "MTK NAND controller" - depends on ARCH_MEDIATEK || COMPILE_TEST ---- a/drivers/mtd/nand/raw/Makefile -+++ b/drivers/mtd/nand/raw/Makefile -@@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n - obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o - obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ - obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o -+obj-$(CONFIG_MTD_NAND_MT7621) += mt7621_nand.o - obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o - obj-$(CONFIG_MTD_NAND_MXIC) += mxic_nand.o - obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o ---- /dev/null -+++ b/drivers/mtd/nand/raw/mt7621_nand.c -@@ -0,0 +1,1350 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * MediaTek MT7621 NAND Flash Controller driver -+ * -+ * Copyright (C) 2020 MediaTek Inc. All Rights Reserved. -+ * -+ * Author: Weijie Gao -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* NFI core registers */ -+#define NFI_CNFG 0x000 -+#define CNFG_OP_MODE_S 12 -+#define CNFG_OP_MODE_M GENMASK(14, 12) -+#define CNFG_OP_CUSTOM 6 -+#define CNFG_AUTO_FMT_EN BIT(9) -+#define CNFG_HW_ECC_EN BIT(8) -+#define CNFG_BYTE_RW BIT(6) -+#define CNFG_READ_MODE BIT(1) -+ -+#define NFI_PAGEFMT 0x004 -+#define PAGEFMT_FDM_ECC_S 12 -+#define PAGEFMT_FDM_ECC_M GENMASK(15, 12) -+#define PAGEFMT_FDM_S 8 -+#define PAGEFMT_FDM_M GENMASK(11, 8) -+#define PAGEFMT_SPARE_S 4 -+#define PAGEFMT_SPARE_M GENMASK(5, 4) -+#define PAGEFMT_PAGE_S 0 -+#define PAGEFMT_PAGE_M GENMASK(1, 0) -+ -+#define NFI_CON 0x008 -+#define CON_NFI_SEC_S 12 -+#define CON_NFI_SEC_M GENMASK(15, 12) -+#define CON_NFI_BWR BIT(9) -+#define CON_NFI_BRD BIT(8) -+#define CON_NFI_RST BIT(1) -+#define CON_FIFO_FLUSH BIT(0) -+ -+#define NFI_ACCCON 0x00c -+#define ACCCON_POECS_S 28 -+#define ACCCON_POECS_MAX 0x0f -+#define ACCCON_POECS_DEF 3 -+#define ACCCON_PRECS_S 22 -+#define ACCCON_PRECS_MAX 0x3f -+#define ACCCON_PRECS_DEF 3 -+#define ACCCON_C2R_S 16 -+#define ACCCON_C2R_MAX 0x3f -+#define ACCCON_C2R_DEF 7 -+#define ACCCON_W2R_S 12 -+#define ACCCON_W2R_MAX 0x0f -+#define ACCCON_W2R_DEF 7 -+#define ACCCON_WH_S 8 -+#define ACCCON_WH_MAX 0x0f -+#define ACCCON_WH_DEF 15 -+#define ACCCON_WST_S 4 -+#define ACCCON_WST_MAX 0x0f -+#define ACCCON_WST_DEF 15 -+#define ACCCON_WST_MIN 3 -+#define ACCCON_RLT_S 0 -+#define ACCCON_RLT_MAX 0x0f -+#define ACCCON_RLT_DEF 15 -+#define ACCCON_RLT_MIN 3 -+ -+#define NFI_CMD 0x020 -+ -+#define NFI_ADDRNOB 0x030 -+#define ADDR_ROW_NOB_S 4 -+#define ADDR_ROW_NOB_M GENMASK(6, 4) -+#define ADDR_COL_NOB_S 0 -+#define ADDR_COL_NOB_M GENMASK(2, 0) -+ -+#define NFI_COLADDR 0x034 -+#define NFI_ROWADDR 0x038 -+ -+#define NFI_STRDATA 0x040 -+#define STR_DATA BIT(0) -+ -+#define NFI_CNRNB 0x044 -+#define CB2R_TIME_S 4 -+#define CB2R_TIME_M GENMASK(7, 4) -+#define STR_CNRNB BIT(0) -+ -+#define NFI_DATAW 0x050 -+#define NFI_DATAR 0x054 -+ -+#define NFI_PIO_DIRDY 0x058 -+#define PIO_DIRDY BIT(0) -+ -+#define NFI_STA 0x060 -+#define STA_NFI_FSM_S 16 -+#define STA_NFI_FSM_M GENMASK(19, 16) -+#define STA_FSM_CUSTOM_DATA 14 -+#define STA_BUSY BIT(8) -+#define STA_ADDR BIT(1) -+#define STA_CMD BIT(0) -+ -+#define NFI_ADDRCNTR 0x070 -+#define SEC_CNTR_S 12 -+#define SEC_CNTR_M GENMASK(15, 12) -+#define SEC_ADDR_S 0 -+#define SEC_ADDR_M GENMASK(9, 0) -+ -+#define NFI_CSEL 0x090 -+#define CSEL_S 0 -+#define CSEL_M GENMASK(1, 0) -+ -+#define NFI_FDM0L 0x0a0 -+#define NFI_FDML(n) (0x0a0 + ((n) << 3)) -+ -+#define NFI_FDM0M 0x0a4 -+#define NFI_FDMM(n) (0x0a4 + ((n) << 3)) -+ -+#define NFI_MASTER_STA 0x210 -+#define MAS_ADDR GENMASK(11, 9) -+#define MAS_RD GENMASK(8, 6) -+#define MAS_WR GENMASK(5, 3) -+#define MAS_RDDLY GENMASK(2, 0) -+ -+/* ECC engine registers */ -+#define ECC_ENCCON 0x000 -+#define ENC_EN BIT(0) -+ -+#define ECC_ENCCNFG 0x004 -+#define ENC_CNFG_MSG_S 16 -+#define ENC_CNFG_MSG_M GENMASK(28, 16) -+#define ENC_MODE_S 4 -+#define ENC_MODE_M GENMASK(5, 4) -+#define ENC_MODE_NFI 1 -+#define ENC_TNUM_S 0 -+#define ENC_TNUM_M GENMASK(2, 0) -+ -+#define ECC_ENCIDLE 0x00c -+#define ENC_IDLE BIT(0) -+ -+#define ECC_DECCON 0x100 -+#define DEC_EN BIT(0) -+ -+#define ECC_DECCNFG 0x104 -+#define DEC_EMPTY_EN BIT(31) -+#define DEC_CS_S 16 -+#define DEC_CS_M GENMASK(28, 16) -+#define DEC_CON_S 12 -+#define DEC_CON_M GENMASK(13, 12) -+#define DEC_CON_EL 2 -+#define DEC_MODE_S 4 -+#define DEC_MODE_M GENMASK(5, 4) -+#define DEC_MODE_NFI 1 -+#define DEC_TNUM_S 0 -+#define DEC_TNUM_M GENMASK(2, 0) -+ -+#define ECC_DECIDLE 0x10c -+#define DEC_IDLE BIT(1) -+ -+#define ECC_DECENUM 0x114 -+#define ERRNUM_S 2 -+#define ERRNUM_M GENMASK(3, 0) -+ -+#define ECC_DECDONE 0x118 -+#define DEC_DONE7 BIT(7) -+#define DEC_DONE6 BIT(6) -+#define DEC_DONE5 BIT(5) -+#define DEC_DONE4 BIT(4) -+#define DEC_DONE3 BIT(3) -+#define DEC_DONE2 BIT(2) -+#define DEC_DONE1 BIT(1) -+#define DEC_DONE0 BIT(0) -+ -+#define ECC_DECEL(n) (0x11c + (n) * 4) -+#define DEC_EL_ODD_S 16 -+#define DEC_EL_EVEN_S 0 -+#define DEC_EL_M 0x1fff -+#define DEC_EL_BYTE_POS_S 3 -+#define DEC_EL_BIT_POS_M GENMASK(3, 0) -+ -+#define ECC_FDMADDR 0x13c -+ -+/* ENCIDLE and DECIDLE */ -+#define ECC_IDLE BIT(0) -+ -+#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \ -+ ((tpoecs) << ACCCON_POECS_S | (tprecs) << ACCCON_PRECS_S | \ -+ (tc2r) << ACCCON_C2R_S | (tw2r) << ACCCON_W2R_S | \ -+ (twh) << ACCCON_WH_S | (twst) << ACCCON_WST_S | (trlt)) -+ -+#define MASTER_STA_MASK (MAS_ADDR | MAS_RD | MAS_WR | \ -+ MAS_RDDLY) -+#define NFI_RESET_TIMEOUT 1000000 -+#define NFI_CORE_TIMEOUT 500000 -+#define ECC_ENGINE_TIMEOUT 500000 -+ -+#define ECC_SECTOR_SIZE 512 -+#define ECC_PARITY_BITS 13 -+ -+#define NFI_FDM_SIZE 8 -+ -+#define MT7621_NFC_NAME "mt7621-nand" -+ -+struct mt7621_nfc { -+ struct nand_controller controller; -+ struct nand_chip nand; -+ struct clk *nfi_clk; -+ struct device *dev; -+ -+ void __iomem *nfi_regs; -+ void __iomem *ecc_regs; -+ -+ u32 spare_per_sector; -+}; -+ -+static const u16 mt7621_nfi_page_size[] = { SZ_512, SZ_2K, SZ_4K }; -+static const u8 mt7621_nfi_spare_size[] = { 16, 26, 27, 28 }; -+static const u8 mt7621_ecc_strength[] = { 4, 6, 8, 10, 12 }; -+ -+static inline u32 nfi_read32(struct mt7621_nfc *nfc, u32 reg) -+{ -+ return readl(nfc->nfi_regs + reg); -+} -+ -+static inline void nfi_write32(struct mt7621_nfc *nfc, u32 reg, u32 val) -+{ -+ writel(val, nfc->nfi_regs + reg); -+} -+ -+static inline u16 nfi_read16(struct mt7621_nfc *nfc, u32 reg) -+{ -+ return readw(nfc->nfi_regs + reg); -+} -+ -+static inline void nfi_write16(struct mt7621_nfc *nfc, u32 reg, u16 val) -+{ -+ writew(val, nfc->nfi_regs + reg); -+} -+ -+static inline void ecc_write16(struct mt7621_nfc *nfc, u32 reg, u16 val) -+{ -+ writew(val, nfc->ecc_regs + reg); -+} -+ -+static inline u32 ecc_read32(struct mt7621_nfc *nfc, u32 reg) -+{ -+ return readl(nfc->ecc_regs + reg); -+} -+ -+static inline void ecc_write32(struct mt7621_nfc *nfc, u32 reg, u32 val) -+{ -+ return writel(val, nfc->ecc_regs + reg); -+} -+ -+static inline u8 *oob_fdm_ptr(struct nand_chip *nand, int sect) -+{ -+ return nand->oob_poi + sect * NFI_FDM_SIZE; -+} -+ -+static inline u8 *oob_ecc_ptr(struct mt7621_nfc *nfc, int sect) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ -+ return nand->oob_poi + nand->ecc.steps * NFI_FDM_SIZE + -+ sect * (nfc->spare_per_sector - NFI_FDM_SIZE); -+} -+ -+static inline u8 *page_data_ptr(struct nand_chip *nand, const u8 *buf, -+ int sect) -+{ -+ return (u8 *)buf + sect * nand->ecc.size; -+} -+ -+static int mt7621_ecc_wait_idle(struct mt7621_nfc *nfc, u32 reg) -+{ -+ struct device *dev = nfc->dev; -+ u32 val; -+ int ret; -+ -+ ret = readw_poll_timeout_atomic(nfc->ecc_regs + reg, val, -+ val & ECC_IDLE, 10, -+ ECC_ENGINE_TIMEOUT); -+ if (ret) { -+ dev_warn(dev, "ECC engine timed out entering idle mode\n"); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_ecc_decoder_wait_done(struct mt7621_nfc *nfc, u32 sect) -+{ -+ struct device *dev = nfc->dev; -+ u32 val; -+ int ret; -+ -+ ret = readw_poll_timeout_atomic(nfc->ecc_regs + ECC_DECDONE, val, -+ val & (1 << sect), 10, -+ ECC_ENGINE_TIMEOUT); -+ -+ if (ret) { -+ dev_warn(dev, "ECC decoder for sector %d timed out\n", -+ sect); -+ return -ETIMEDOUT; -+ } -+ -+ return 0; -+} -+ -+static void mt7621_ecc_encoder_op(struct mt7621_nfc *nfc, bool enable) -+{ -+ mt7621_ecc_wait_idle(nfc, ECC_ENCIDLE); -+ ecc_write16(nfc, ECC_ENCCON, enable ? ENC_EN : 0); -+} -+ -+static void mt7621_ecc_decoder_op(struct mt7621_nfc *nfc, bool enable) -+{ -+ mt7621_ecc_wait_idle(nfc, ECC_DECIDLE); -+ ecc_write16(nfc, ECC_DECCON, enable ? DEC_EN : 0); -+} -+ -+static int mt7621_ecc_correct_check(struct mt7621_nfc *nfc, u8 *sector_buf, -+ u8 *fdm_buf, u32 sect) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ u32 decnum, num_error_bits, fdm_end_bits; -+ u32 error_locations, error_bit_loc; -+ u32 error_byte_pos, error_bit_pos; -+ int bitflips = 0; -+ u32 i; -+ -+ decnum = ecc_read32(nfc, ECC_DECENUM); -+ num_error_bits = (decnum >> (sect << ERRNUM_S)) & ERRNUM_M; -+ fdm_end_bits = (nand->ecc.size + NFI_FDM_SIZE) << 3; -+ -+ if (!num_error_bits) -+ return 0; -+ -+ if (num_error_bits == ERRNUM_M) -+ return -1; -+ -+ for (i = 0; i < num_error_bits; i++) { -+ error_locations = ecc_read32(nfc, ECC_DECEL(i / 2)); -+ error_bit_loc = (error_locations >> ((i % 2) * DEC_EL_ODD_S)) & -+ DEC_EL_M; -+ error_byte_pos = error_bit_loc >> DEC_EL_BYTE_POS_S; -+ error_bit_pos = error_bit_loc & DEC_EL_BIT_POS_M; -+ -+ if (error_bit_loc < (nand->ecc.size << 3)) { -+ if (sector_buf) { -+ sector_buf[error_byte_pos] ^= -+ (1 << error_bit_pos); -+ } -+ } else if (error_bit_loc < fdm_end_bits) { -+ if (fdm_buf) { -+ fdm_buf[error_byte_pos - nand->ecc.size] ^= -+ (1 << error_bit_pos); -+ } -+ } -+ -+ bitflips++; -+ } -+ -+ return bitflips; -+} -+ -+static int mt7621_nfc_wait_write_completion(struct mt7621_nfc *nfc, -+ struct nand_chip *nand) -+{ -+ struct device *dev = nfc->dev; -+ u16 val; -+ int ret; -+ -+ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_ADDRCNTR, val, -+ ((val & SEC_CNTR_M) >> SEC_CNTR_S) >= nand->ecc.steps, 10, -+ NFI_CORE_TIMEOUT); -+ -+ if (ret) { -+ dev_warn(dev, "NFI core write operation timed out\n"); -+ return -ETIMEDOUT; -+ } -+ -+ return ret; -+} -+ -+static void mt7621_nfc_hw_reset(struct mt7621_nfc *nfc) -+{ -+ u32 val; -+ int ret; -+ -+ /* reset all registers and force the NFI master to terminate */ -+ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST); -+ -+ /* wait for the master to finish the last transaction */ -+ ret = readw_poll_timeout(nfc->nfi_regs + NFI_MASTER_STA, val, -+ !(val & MASTER_STA_MASK), 50, -+ NFI_RESET_TIMEOUT); -+ if (ret) { -+ dev_warn(nfc->dev, "Failed to reset NFI master in %dms\n", -+ NFI_RESET_TIMEOUT); -+ } -+ -+ /* ensure any status register affected by the NFI master is reset */ -+ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST); -+ nfi_write16(nfc, NFI_STRDATA, 0); -+} -+ -+static inline void mt7621_nfc_hw_init(struct mt7621_nfc *nfc) -+{ -+ u32 acccon; -+ -+ /* -+ * CNRNB: nand ready/busy register -+ * ------------------------------- -+ * 7:4: timeout register for polling the NAND busy/ready signal -+ * 0 : poll the status of the busy/ready signal after [7:4]*16 cycles. -+ */ -+ nfi_write16(nfc, NFI_CNRNB, CB2R_TIME_M | STR_CNRNB); -+ -+ mt7621_nfc_hw_reset(nfc); -+ -+ /* Apply default access timing */ -+ acccon = ACCTIMING(ACCCON_POECS_DEF, ACCCON_PRECS_DEF, ACCCON_C2R_DEF, -+ ACCCON_W2R_DEF, ACCCON_WH_DEF, ACCCON_WST_DEF, -+ ACCCON_RLT_DEF); -+ -+ nfi_write32(nfc, NFI_ACCCON, acccon); -+} -+ -+static int mt7621_nfc_send_command(struct mt7621_nfc *nfc, u8 command) -+{ -+ struct device *dev = nfc->dev; -+ u32 val; -+ int ret; -+ -+ nfi_write32(nfc, NFI_CMD, command); -+ -+ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, -+ !(val & STA_CMD), 10, -+ NFI_CORE_TIMEOUT); -+ if (ret) { -+ dev_warn(dev, "NFI core timed out entering command mode\n"); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_nfc_send_address_byte(struct mt7621_nfc *nfc, int addr) -+{ -+ struct device *dev = nfc->dev; -+ u32 val; -+ int ret; -+ -+ nfi_write32(nfc, NFI_COLADDR, addr); -+ nfi_write32(nfc, NFI_ROWADDR, 0); -+ nfi_write16(nfc, NFI_ADDRNOB, 1); -+ -+ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, -+ !(val & STA_ADDR), 10, -+ NFI_CORE_TIMEOUT); -+ if (ret) { -+ dev_warn(dev, "NFI core timed out entering address mode\n"); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_nfc_send_address(struct mt7621_nfc *nfc, const u8 *addr, -+ unsigned int naddrs) -+{ -+ int ret; -+ -+ while (naddrs) { -+ ret = mt7621_nfc_send_address_byte(nfc, *addr); -+ if (ret) -+ return ret; -+ -+ addr++; -+ naddrs--; -+ } -+ -+ return 0; -+} -+ -+static void mt7621_nfc_wait_pio_ready(struct mt7621_nfc *nfc) -+{ -+ struct device *dev = nfc->dev; -+ int ret; -+ u16 val; -+ -+ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_PIO_DIRDY, val, -+ val & PIO_DIRDY, 10, -+ NFI_CORE_TIMEOUT); -+ if (ret < 0) -+ dev_err(dev, "NFI core PIO mode not ready\n"); -+} -+ -+static u32 mt7621_nfc_pio_read(struct mt7621_nfc *nfc, bool br) -+{ -+ u32 reg; -+ -+ /* after each byte read, the NFI_STA reg is reset by the hardware */ -+ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S; -+ if (reg != STA_FSM_CUSTOM_DATA) { -+ reg = nfi_read16(nfc, NFI_CNFG); -+ reg |= CNFG_READ_MODE | CNFG_BYTE_RW; -+ if (!br) -+ reg &= ~CNFG_BYTE_RW; -+ nfi_write16(nfc, NFI_CNFG, reg); -+ -+ /* -+ * set to max sector to allow the HW to continue reading over -+ * unaligned accesses -+ */ -+ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BRD); -+ -+ /* trigger to fetch data */ -+ nfi_write16(nfc, NFI_STRDATA, STR_DATA); -+ } -+ -+ mt7621_nfc_wait_pio_ready(nfc); -+ -+ return nfi_read32(nfc, NFI_DATAR); -+} -+ -+static void mt7621_nfc_read_data(struct mt7621_nfc *nfc, u8 *buf, u32 len) -+{ -+ while (((uintptr_t)buf & 3) && len) { -+ *buf = mt7621_nfc_pio_read(nfc, true); -+ buf++; -+ len--; -+ } -+ -+ while (len >= 4) { -+ *(u32 *)buf = mt7621_nfc_pio_read(nfc, false); -+ buf += 4; -+ len -= 4; -+ } -+ -+ while (len) { -+ *buf = mt7621_nfc_pio_read(nfc, true); -+ buf++; -+ len--; -+ } -+} -+ -+static void mt7621_nfc_read_data_discard(struct mt7621_nfc *nfc, u32 len) -+{ -+ while (len >= 4) { -+ mt7621_nfc_pio_read(nfc, false); -+ len -= 4; -+ } -+ -+ while (len) { -+ mt7621_nfc_pio_read(nfc, true); -+ len--; -+ } -+} -+ -+static void mt7621_nfc_pio_write(struct mt7621_nfc *nfc, u32 val, bool bw) -+{ -+ u32 reg; -+ -+ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S; -+ if (reg != STA_FSM_CUSTOM_DATA) { -+ reg = nfi_read16(nfc, NFI_CNFG); -+ reg &= ~(CNFG_READ_MODE | CNFG_BYTE_RW); -+ if (bw) -+ reg |= CNFG_BYTE_RW; -+ nfi_write16(nfc, NFI_CNFG, reg); -+ -+ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BWR); -+ nfi_write16(nfc, NFI_STRDATA, STR_DATA); -+ } -+ -+ mt7621_nfc_wait_pio_ready(nfc); -+ nfi_write32(nfc, NFI_DATAW, val); -+} -+ -+static void mt7621_nfc_write_data(struct mt7621_nfc *nfc, const u8 *buf, -+ u32 len) -+{ -+ while (((uintptr_t)buf & 3) && len) { -+ mt7621_nfc_pio_write(nfc, *buf, true); -+ buf++; -+ len--; -+ } -+ -+ while (len >= 4) { -+ mt7621_nfc_pio_write(nfc, *(const u32 *)buf, false); -+ buf += 4; -+ len -= 4; -+ } -+ -+ while (len) { -+ mt7621_nfc_pio_write(nfc, *buf, true); -+ buf++; -+ len--; -+ } -+} -+ -+static void mt7621_nfc_write_data_empty(struct mt7621_nfc *nfc, u32 len) -+{ -+ while (len >= 4) { -+ mt7621_nfc_pio_write(nfc, 0xffffffff, false); -+ len -= 4; -+ } -+ -+ while (len) { -+ mt7621_nfc_pio_write(nfc, 0xff, true); -+ len--; -+ } -+} -+ -+static int mt7621_nfc_dev_ready(struct mt7621_nfc *nfc, -+ unsigned int timeout_ms) -+{ -+ u32 val; -+ -+ return readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, -+ !(val & STA_BUSY), 10, -+ timeout_ms * 1000); -+} -+ -+static int mt7621_nfc_exec_instr(struct nand_chip *nand, -+ const struct nand_op_instr *instr) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ -+ switch (instr->type) { -+ case NAND_OP_CMD_INSTR: -+ mt7621_nfc_hw_reset(nfc); -+ nfi_write16(nfc, NFI_CNFG, CNFG_OP_CUSTOM << CNFG_OP_MODE_S); -+ return mt7621_nfc_send_command(nfc, instr->ctx.cmd.opcode); -+ case NAND_OP_ADDR_INSTR: -+ return mt7621_nfc_send_address(nfc, instr->ctx.addr.addrs, -+ instr->ctx.addr.naddrs); -+ case NAND_OP_DATA_IN_INSTR: -+ mt7621_nfc_read_data(nfc, instr->ctx.data.buf.in, -+ instr->ctx.data.len); -+ return 0; -+ case NAND_OP_DATA_OUT_INSTR: -+ mt7621_nfc_write_data(nfc, instr->ctx.data.buf.out, -+ instr->ctx.data.len); -+ return 0; -+ case NAND_OP_WAITRDY_INSTR: -+ return mt7621_nfc_dev_ready(nfc, -+ instr->ctx.waitrdy.timeout_ms); -+ default: -+ WARN_ONCE(1, "unsupported NAND instruction type: %d\n", -+ instr->type); -+ -+ return -EINVAL; -+ } -+} -+ -+static int mt7621_nfc_exec_op(struct nand_chip *nand, -+ const struct nand_operation *op, bool check_only) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ int i, ret; -+ -+ if (check_only) -+ return 0; -+ -+ /* Only CS0 available */ -+ nfi_write16(nfc, NFI_CSEL, 0); -+ -+ for (i = 0; i < op->ninstrs; i++) { -+ ret = mt7621_nfc_exec_instr(nand, &op->instrs[i]); -+ if (ret) -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_nfc_setup_data_interface(struct nand_chip *nand, int csline, -+ const struct nand_data_interface *conf) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ const struct nand_sdr_timings *timings; -+ u32 acccon, temp, rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt; -+ -+ if (!nfc->nfi_clk) -+ return -ENOTSUPP; -+ -+ timings = nand_get_sdr_timings(conf); -+ if (IS_ERR(timings)) -+ return -ENOTSUPP; -+ -+ rate = clk_get_rate(nfc->nfi_clk); -+ -+ /* turn clock rate into KHZ */ -+ rate /= 1000; -+ -+ tpoecs = max(timings->tALH_min, timings->tCLH_min) / 1000; -+ tpoecs = DIV_ROUND_UP(tpoecs * rate, 1000000); -+ tpoecs = min_t(u32, tpoecs, ACCCON_POECS_MAX); -+ -+ tprecs = max(timings->tCLS_min, timings->tALS_min) / 1000; -+ tprecs = DIV_ROUND_UP(tprecs * rate, 1000000); -+ tprecs = min_t(u32, tprecs, ACCCON_PRECS_MAX); -+ -+ /* sdr interface has no tCR which means CE# low to RE# low */ -+ tc2r = 0; -+ -+ tw2r = timings->tWHR_min / 1000; -+ tw2r = DIV_ROUND_UP(tw2r * rate, 1000000); -+ tw2r = DIV_ROUND_UP(tw2r - 1, 2); -+ tw2r = min_t(u32, tw2r, ACCCON_W2R_MAX); -+ -+ twh = max(timings->tREH_min, timings->tWH_min) / 1000; -+ twh = DIV_ROUND_UP(twh * rate, 1000000) - 1; -+ twh = min_t(u32, twh, ACCCON_WH_MAX); -+ -+ /* Calculate real WE#/RE# hold time in nanosecond */ -+ temp = (twh + 1) * 1000000 / rate; -+ /* nanosecond to picosecond */ -+ temp *= 1000; -+ -+ /* -+ * WE# low level time should be expaned to meet WE# pulse time -+ * and WE# cycle time at the same time. -+ */ -+ if (temp < timings->tWC_min) -+ twst = timings->tWC_min - temp; -+ else -+ twst = 0; -+ twst = max(timings->tWP_min, twst) / 1000; -+ twst = DIV_ROUND_UP(twst * rate, 1000000) - 1; -+ twst = min_t(u32, twst, ACCCON_WST_MAX); -+ -+ /* -+ * RE# low level time should be expaned to meet RE# pulse time -+ * and RE# cycle time at the same time. -+ */ -+ if (temp < timings->tRC_min) -+ trlt = timings->tRC_min - temp; -+ else -+ trlt = 0; -+ trlt = max(trlt, timings->tRP_min) / 1000; -+ trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1; -+ trlt = min_t(u32, trlt, ACCCON_RLT_MAX); -+ -+ if (csline == NAND_DATA_IFACE_CHECK_ONLY) { -+ if (twst < ACCCON_WST_MIN || trlt < ACCCON_RLT_MIN) -+ return -ENOTSUPP; -+ } -+ -+ acccon = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt); -+ -+ dev_info(nfc->dev, "Using programmed access timing: %08x\n", acccon); -+ -+ nfi_write32(nfc, NFI_ACCCON, acccon); -+ -+ return 0; -+} -+ -+static int mt7621_nfc_calc_ecc_strength(struct mt7621_nfc *nfc, -+ u32 avail_ecc_bytes) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ u32 strength; -+ int i; -+ -+ strength = avail_ecc_bytes * 8 / ECC_PARITY_BITS; -+ -+ /* Find the closest supported ecc strength */ -+ for (i = ARRAY_SIZE(mt7621_ecc_strength) - 1; i >= 0; i--) { -+ if (mt7621_ecc_strength[i] <= strength) -+ break; -+ } -+ -+ if (unlikely(i < 0)) { -+ dev_err(nfc->dev, "OOB size (%u) is not supported\n", -+ mtd->oobsize); -+ return -EINVAL; -+ } -+ -+ nand->ecc.strength = mt7621_ecc_strength[i]; -+ nand->ecc.bytes = -+ DIV_ROUND_UP(nand->ecc.strength * ECC_PARITY_BITS, 8); -+ -+ dev_info(nfc->dev, "ECC strength adjusted to %u bits\n", -+ nand->ecc.strength); -+ -+ return i; -+} -+ -+static int mt7621_nfc_set_spare_per_sector(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ u32 size; -+ int i; -+ -+ size = nand->ecc.bytes + NFI_FDM_SIZE; -+ -+ /* Find the closest supported spare size */ -+ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_spare_size); i++) { -+ if (mt7621_nfi_spare_size[i] >= size) -+ break; -+ } -+ -+ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_spare_size))) { -+ dev_err(nfc->dev, "OOB size (%u) is not supported\n", -+ mtd->oobsize); -+ return -EINVAL; -+ } -+ -+ nfc->spare_per_sector = mt7621_nfi_spare_size[i]; -+ -+ return i; -+} -+ -+static int mt7621_nfc_ecc_init(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ u32 spare_per_sector, encode_block_size, decode_block_size; -+ u32 ecc_enccfg, ecc_deccfg; -+ int ecc_cap; -+ -+ /* Only hardware ECC mode is supported */ -+ if (nand->ecc.mode != NAND_ECC_HW_SYNDROME) { -+ dev_err(nfc->dev, "Only hardware ECC mode is supported\n"); -+ return -EINVAL; -+ } -+ -+ nand->ecc.size = ECC_SECTOR_SIZE; -+ nand->ecc.steps = mtd->writesize / nand->ecc.size; -+ -+ spare_per_sector = mtd->oobsize / nand->ecc.steps; -+ -+ ecc_cap = mt7621_nfc_calc_ecc_strength(nfc, -+ spare_per_sector - NFI_FDM_SIZE); -+ if (ecc_cap < 0) -+ return ecc_cap; -+ -+ /* Sector + FDM */ -+ encode_block_size = (nand->ecc.size + NFI_FDM_SIZE) * 8; -+ ecc_enccfg = ecc_cap | (ENC_MODE_NFI << ENC_MODE_S) | -+ (encode_block_size << ENC_CNFG_MSG_S); -+ -+ /* Sector + FDM + ECC parity bits */ -+ decode_block_size = ((nand->ecc.size + NFI_FDM_SIZE) * 8) + -+ nand->ecc.strength * ECC_PARITY_BITS; -+ ecc_deccfg = ecc_cap | (DEC_MODE_NFI << DEC_MODE_S) | -+ (decode_block_size << DEC_CS_S) | -+ (DEC_CON_EL << DEC_CON_S) | DEC_EMPTY_EN; -+ -+ mt7621_ecc_encoder_op(nfc, false); -+ ecc_write32(nfc, ECC_ENCCNFG, ecc_enccfg); -+ -+ mt7621_ecc_decoder_op(nfc, false); -+ ecc_write32(nfc, ECC_DECCNFG, ecc_deccfg); -+ -+ return 0; -+} -+ -+static int mt7621_nfc_set_page_format(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ int i, spare_size; -+ u32 pagefmt; -+ -+ spare_size = mt7621_nfc_set_spare_per_sector(nfc); -+ if (spare_size < 0) -+ return spare_size; -+ -+ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_page_size); i++) { -+ if (mt7621_nfi_page_size[i] == mtd->writesize) -+ break; -+ } -+ -+ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_page_size))) { -+ dev_err(nfc->dev, "Page size (%u) is not supported\n", -+ mtd->writesize); -+ return -EINVAL; -+ } -+ -+ pagefmt = i | (spare_size << PAGEFMT_SPARE_S) | -+ (NFI_FDM_SIZE << PAGEFMT_FDM_S) | -+ (NFI_FDM_SIZE << PAGEFMT_FDM_ECC_S); -+ -+ nfi_write16(nfc, NFI_PAGEFMT, pagefmt); -+ -+ return 0; -+} -+ -+static int mt7621_nfc_attach_chip(struct nand_chip *nand) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ int ret; -+ -+ if (nand->options & NAND_BUSWIDTH_16) { -+ dev_err(nfc->dev, "16-bit buswidth is not supported"); -+ return -EINVAL; -+ } -+ -+ ret = mt7621_nfc_ecc_init(nfc); -+ if (ret) -+ return ret; -+ -+ return mt7621_nfc_set_page_format(nfc); -+} -+ -+static const struct nand_controller_ops mt7621_nfc_controller_ops = { -+ .attach_chip = mt7621_nfc_attach_chip, -+ .exec_op = mt7621_nfc_exec_op, -+ .setup_data_interface = mt7621_nfc_setup_data_interface, -+}; -+ -+static int mt7621_nfc_ooblayout_free(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oob_region) -+{ -+ struct nand_chip *nand = mtd_to_nand(mtd); -+ -+ if (section >= nand->ecc.steps) -+ return -ERANGE; -+ -+ oob_region->length = NFI_FDM_SIZE - 1; -+ oob_region->offset = section * NFI_FDM_SIZE + 1; -+ -+ return 0; -+} -+ -+static int mt7621_nfc_ooblayout_ecc(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oob_region) -+{ -+ struct nand_chip *nand = mtd_to_nand(mtd); -+ -+ if (section) -+ return -ERANGE; -+ -+ oob_region->offset = NFI_FDM_SIZE * nand->ecc.steps; -+ oob_region->length = mtd->oobsize - oob_region->offset; -+ -+ return 0; -+} -+ -+static const struct mtd_ooblayout_ops mt7621_nfc_ooblayout_ops = { -+ .free = mt7621_nfc_ooblayout_free, -+ .ecc = mt7621_nfc_ooblayout_ecc, -+}; -+ -+static void mt7621_nfc_write_fdm(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ u32 vall, valm; -+ u8 *oobptr; -+ int i, j; -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ vall = 0; -+ valm = 0; -+ oobptr = oob_fdm_ptr(nand, i); -+ -+ for (j = 0; j < 4; j++) -+ vall |= (u32)oobptr[j] << (j * 8); -+ -+ for (j = 0; j < 4; j++) -+ valm |= (u32)oobptr[j + 4] << ((j - 4) * 8); -+ -+ nfi_write32(nfc, NFI_FDML(i), vall); -+ nfi_write32(nfc, NFI_FDMM(i), valm); -+ } -+} -+ -+static void mt7621_nfc_read_sector_fdm(struct mt7621_nfc *nfc, u32 sect) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ u32 vall, valm; -+ u8 *oobptr; -+ int i; -+ -+ vall = nfi_read32(nfc, NFI_FDML(sect)); -+ valm = nfi_read32(nfc, NFI_FDMM(sect)); -+ oobptr = oob_fdm_ptr(nand, sect); -+ -+ for (i = 0; i < 4; i++) -+ oobptr[i] = (vall >> (i * 8)) & 0xff; -+ -+ for (i = 0; i < 4; i++) -+ oobptr[i + 4] = (valm >> (i * 8)) & 0xff; -+} -+ -+static int mt7621_nfc_read_page_hwecc(struct nand_chip *nand, uint8_t *buf, -+ int oob_required, int page) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ int bitflips = 0; -+ int rc, i; -+ -+ nand_read_page_op(nand, page, 0, NULL, 0); -+ -+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | -+ CNFG_READ_MODE | CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN); -+ -+ mt7621_ecc_decoder_op(nfc, true); -+ -+ nfi_write16(nfc, NFI_CON, -+ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S)); -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ if (buf) -+ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i), -+ nand->ecc.size); -+ else -+ mt7621_nfc_read_data_discard(nfc, nand->ecc.size); -+ -+ rc = mt7621_ecc_decoder_wait_done(nfc, i); -+ -+ mt7621_nfc_read_sector_fdm(nfc, i); -+ -+ if (rc < 0) { -+ bitflips = -EIO; -+ continue; -+ } -+ -+ rc = mt7621_ecc_correct_check(nfc, -+ buf ? page_data_ptr(nand, buf, i) : NULL, -+ oob_fdm_ptr(nand, i), i); -+ -+ if (rc < 0) { -+ dev_warn(nfc->dev, -+ "Uncorrectable ECC error at page %d.%d\n", -+ page, i); -+ bitflips = -EBADMSG; -+ mtd->ecc_stats.failed++; -+ } else if (bitflips >= 0) { -+ bitflips += rc; -+ mtd->ecc_stats.corrected += rc; -+ } -+ } -+ -+ mt7621_ecc_decoder_op(nfc, false); -+ -+ nfi_write16(nfc, NFI_CON, 0); -+ -+ return bitflips; -+} -+ -+static int mt7621_nfc_read_page_raw(struct nand_chip *nand, uint8_t *buf, -+ int oob_required, int page) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ int i; -+ -+ nand_read_page_op(nand, page, 0, NULL, 0); -+ -+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | -+ CNFG_READ_MODE); -+ -+ nfi_write16(nfc, NFI_CON, -+ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S)); -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ /* Read data */ -+ if (buf) -+ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i), -+ nand->ecc.size); -+ else -+ mt7621_nfc_read_data_discard(nfc, nand->ecc.size); -+ -+ /* Read FDM */ -+ mt7621_nfc_read_data(nfc, oob_fdm_ptr(nand, i), NFI_FDM_SIZE); -+ -+ /* Read ECC parity data */ -+ mt7621_nfc_read_data(nfc, oob_ecc_ptr(nfc, i), -+ nfc->spare_per_sector - NFI_FDM_SIZE); -+ } -+ -+ nfi_write16(nfc, NFI_CON, 0); -+ -+ return 0; -+} -+ -+static int mt7621_nfc_read_oob_hwecc(struct nand_chip *nand, int page) -+{ -+ return mt7621_nfc_read_page_hwecc(nand, NULL, 1, page); -+} -+ -+static int mt7621_nfc_read_oob_raw(struct nand_chip *nand, int page) -+{ -+ return mt7621_nfc_read_page_raw(nand, NULL, 1, page); -+} -+ -+static int mt7621_nfc_check_empty_page(struct nand_chip *nand, const u8 *buf) -+{ -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ uint32_t i, j; -+ u8 *oobptr; -+ -+ if (buf) { -+ for (i = 0; i < mtd->writesize; i++) -+ if (buf[i] != 0xff) -+ return 0; -+ } -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ oobptr = oob_fdm_ptr(nand, i); -+ for (j = 0; j < NFI_FDM_SIZE; j++) -+ if (oobptr[j] != 0xff) -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static int mt7621_nfc_write_page_hwecc(struct nand_chip *nand, -+ const uint8_t *buf, int oob_required, -+ int page) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ -+ if (mt7621_nfc_check_empty_page(nand, buf)) { -+ /* -+ * MT7621 ECC engine always generates parity code for input -+ * pages, even for empty pages. Doing so will write back ECC -+ * parity code to the oob region, which means such pages will -+ * no longer be empty pages. -+ * -+ * To avoid this, stop write operation if current page is an -+ * empty page. -+ */ -+ return 0; -+ } -+ -+ nand_prog_page_begin_op(nand, page, 0, NULL, 0); -+ -+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | -+ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN); -+ -+ mt7621_ecc_encoder_op(nfc, true); -+ -+ mt7621_nfc_write_fdm(nfc); -+ -+ nfi_write16(nfc, NFI_CON, -+ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S)); -+ -+ if (buf) -+ mt7621_nfc_write_data(nfc, buf, mtd->writesize); -+ else -+ mt7621_nfc_write_data_empty(nfc, mtd->writesize); -+ -+ mt7621_nfc_wait_write_completion(nfc, nand); -+ -+ mt7621_ecc_encoder_op(nfc, false); -+ -+ nfi_write16(nfc, NFI_CON, 0); -+ -+ return nand_prog_page_end_op(nand); -+} -+ -+static int mt7621_nfc_write_page_raw(struct nand_chip *nand, -+ const uint8_t *buf, int oob_required, -+ int page) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ int i; -+ -+ nand_prog_page_begin_op(nand, page, 0, NULL, 0); -+ -+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S)); -+ -+ nfi_write16(nfc, NFI_CON, -+ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S)); -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ /* Write data */ -+ if (buf) -+ mt7621_nfc_write_data(nfc, page_data_ptr(nand, buf, i), -+ nand->ecc.size); -+ else -+ mt7621_nfc_write_data_empty(nfc, nand->ecc.size); -+ -+ /* Write FDM */ -+ mt7621_nfc_write_data(nfc, oob_fdm_ptr(nand, i), -+ NFI_FDM_SIZE); -+ -+ /* Write dummy ECC parity data */ -+ mt7621_nfc_write_data_empty(nfc, nfc->spare_per_sector - -+ NFI_FDM_SIZE); -+ } -+ -+ mt7621_nfc_wait_write_completion(nfc, nand); -+ -+ nfi_write16(nfc, NFI_CON, 0); -+ -+ return nand_prog_page_end_op(nand); -+} -+ -+static int mt7621_nfc_write_oob_hwecc(struct nand_chip *nand, int page) -+{ -+ return mt7621_nfc_write_page_hwecc(nand, NULL, 1, page); -+} -+ -+static int mt7621_nfc_write_oob_raw(struct nand_chip *nand, int page) -+{ -+ return mt7621_nfc_write_page_raw(nand, NULL, 1, page); -+} -+ -+static int mt7621_nfc_init_chip(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd; -+ int ret; -+ -+ nand->controller = &nfc->controller; -+ nand_set_controller_data(nand, (void *)nfc); -+ nand_set_flash_node(nand, nfc->dev->of_node); -+ -+ nand->options |= NAND_USE_BOUNCE_BUFFER | NAND_NO_SUBPAGE_WRITE; -+ if (!nfc->nfi_clk) -+ nand->options |= NAND_KEEP_TIMINGS; -+ -+ nand->ecc.mode = NAND_ECC_HW_SYNDROME; -+ nand->ecc.read_page = mt7621_nfc_read_page_hwecc; -+ nand->ecc.read_page_raw = mt7621_nfc_read_page_raw; -+ nand->ecc.write_page = mt7621_nfc_write_page_hwecc; -+ nand->ecc.write_page_raw = mt7621_nfc_write_page_raw; -+ nand->ecc.read_oob = mt7621_nfc_read_oob_hwecc; -+ nand->ecc.read_oob_raw = mt7621_nfc_read_oob_raw; -+ nand->ecc.write_oob = mt7621_nfc_write_oob_hwecc; -+ nand->ecc.write_oob_raw = mt7621_nfc_write_oob_raw; -+ -+ mtd = nand_to_mtd(nand); -+ mtd->owner = THIS_MODULE; -+ mtd->dev.parent = nfc->dev; -+ mtd->name = MT7621_NFC_NAME; -+ mtd_set_ooblayout(mtd, &mt7621_nfc_ooblayout_ops); -+ -+ mt7621_nfc_hw_init(nfc); -+ -+ ret = nand_scan(nand, 1); -+ if (ret) -+ return ret; -+ -+ ret = mtd_device_register(mtd, NULL, 0); -+ if (ret) { -+ dev_err(nfc->dev, "Failed to register MTD: %d\n", ret); -+ nand_release(nand); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_nfc_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct mt7621_nfc *nfc; -+ struct resource *res; -+ int ret; -+ -+ nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL); -+ if (!nfc) -+ return -ENOMEM; -+ -+ nand_controller_init(&nfc->controller); -+ nfc->controller.ops = &mt7621_nfc_controller_ops; -+ nfc->dev = dev; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nfi"); -+ nfc->nfi_regs = devm_ioremap_resource(dev, res); -+ if (IS_ERR(nfc->nfi_regs)) { -+ ret = PTR_ERR(nfc->nfi_regs); -+ return ret; -+ } -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ecc"); -+ nfc->ecc_regs = devm_ioremap_resource(dev, res); -+ if (IS_ERR(nfc->ecc_regs)) { -+ ret = PTR_ERR(nfc->ecc_regs); -+ return ret; -+ } -+ -+ nfc->nfi_clk = devm_clk_get(dev, "nfi_clk"); -+ if (IS_ERR(nfc->nfi_clk)) { -+ dev_warn(dev, "nfi clk not provided\n"); -+ nfc->nfi_clk = NULL; -+ } else { -+ ret = clk_prepare_enable(nfc->nfi_clk); -+ if (ret) { -+ dev_err(dev, "Failed to enable nfi core clock\n"); -+ return ret; -+ } -+ } -+ -+ platform_set_drvdata(pdev, nfc); -+ -+ ret = mt7621_nfc_init_chip(nfc); -+ if (ret) { -+ dev_err(dev, "Failed to initialize nand chip\n"); -+ goto clk_disable; -+ } -+ -+ return 0; -+ -+clk_disable: -+ clk_disable_unprepare(nfc->nfi_clk); -+ -+ return ret; -+} -+ -+static int mt7621_nfc_remove(struct platform_device *pdev) -+{ -+ struct mt7621_nfc *nfc = platform_get_drvdata(pdev); -+ -+ nand_release(&nfc->nand); -+ clk_disable_unprepare(nfc->nfi_clk); -+ -+ return 0; -+} -+ -+static const struct of_device_id mt7621_nfc_id_table[] = { -+ { .compatible = "mediatek,mt7621-nfc" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, match); -+ -+static struct platform_driver mt7621_nfc_driver = { -+ .probe = mt7621_nfc_probe, -+ .remove = mt7621_nfc_remove, -+ .driver = { -+ .name = MT7621_NFC_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = mt7621_nfc_id_table, -+ }, -+}; -+module_platform_driver(mt7621_nfc_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Weijie Gao "); -+MODULE_DESCRIPTION("MediaTek MT7621 NAND Flash Controller driver"); diff --git a/target/linux/ramips/patches-5.10/0301-dt-bindings-add-documentation-for-mt7621-nand-driver.patch b/target/linux/ramips/patches-5.10/0301-dt-bindings-add-documentation-for-mt7621-nand-driver.patch deleted file mode 100644 index 3d122c10c0..0000000000 --- a/target/linux/ramips/patches-5.10/0301-dt-bindings-add-documentation-for-mt7621-nand-driver.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 3d5f4da8296b23eb3abf8b13122b0d06a215e79c Mon Sep 17 00:00:00 2001 -From: Weijie Gao -Date: Wed, 1 Apr 2020 02:07:59 +0800 -Subject: [PATCH 2/2] dt-bindings: add documentation for mt7621-nand driver - -This patch adds documentation for MediaTek MT7621 NAND flash controller -driver. - -Signed-off-by: Weijie Gao ---- - .../bindings/mtd/mediatek,mt7621-nfc.yaml | 68 ++++++++++++++++++++++ - 1 file changed, 68 insertions(+) - create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml -@@ -0,0 +1,68 @@ -+# SPDX-License-Identifier: GPL-2.0 -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/mtd/mediatek,mt7621-nfc.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MediaTek MT7621 SoC NAND Flash Controller (NFC) DT binding -+ -+maintainers: -+ - Weijie Gao -+ -+description: | -+ This driver uses a single node to describe both NAND Flash controller -+ interface (NFI) and ECC engine for MT7621 SoC. -+ MT7621 supports only one chip select. -+ -+properties: -+ "#address-cells": false -+ "#size-cells": false -+ -+ compatible: -+ enum: -+ - mediatek,mt7621-nfc -+ -+ reg: -+ items: -+ - description: Register base of NFI core -+ - description: Register base of ECC engine -+ -+ reg-names: -+ items: -+ - const: nfi -+ - const: ecc -+ -+ clocks: -+ items: -+ - description: Source clock for NFI core, fixed 125MHz -+ -+ clock-names: -+ items: -+ - const: nfi_clk -+ -+required: -+ - compatible -+ - reg -+ - reg-names -+ - clocks -+ - clock-names -+ -+examples: -+ - | -+ nficlock: nficlock { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ -+ clock-frequency = <125000000>; -+ }; -+ -+ nand@1e003000 { -+ compatible = "mediatek,mt7621-nfc"; -+ -+ reg = <0x1e003000 0x800 -+ 0x1e003800 0x800>; -+ reg-names = "nfi", "ecc"; -+ -+ clocks = <&nficlock>; -+ clock-names = "nfi_clk"; -+ }; diff --git a/target/linux/ramips/patches-5.10/100-mt7621-core-detect-hack.patch b/target/linux/ramips/patches-5.10/100-mt7621-core-detect-hack.patch deleted file mode 100644 index 1c8b61f8ef..0000000000 --- a/target/linux/ramips/patches-5.10/100-mt7621-core-detect-hack.patch +++ /dev/null @@ -1,61 +0,0 @@ -There is a variant of MT7621 which contains only one CPU core instead of 2. -This is not reflected in the config register, so the kernel detects more -physical cores, which leads to a hang on SMP bringup. -Add a hack to detect missing cores. - -Signed-off-by: Felix Fietkau - ---- a/arch/mips/kernel/smp-cps.c -+++ b/arch/mips/kernel/smp-cps.c -@@ -43,6 +43,11 @@ static unsigned core_vpe_count(unsigned - return mips_cps_numvps(cluster, core); - } - -+bool __weak plat_cpu_core_present(int core) -+{ -+ return true; -+} -+ - static void __init cps_smp_setup(void) - { - unsigned int nclusters, ncores, nvpes, core_vpes; -@@ -60,6 +65,8 @@ static void __init cps_smp_setup(void) - - ncores = mips_cps_numcores(cl); - for (c = 0; c < ncores; c++) { -+ if (!plat_cpu_core_present(c)) -+ continue; - core_vpes = core_vpe_count(cl, c); - - if (c > 0) ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - - #include - -@@ -160,6 +161,20 @@ void __init ralink_of_remap(void) - panic("Failed to remap core resources"); - } - -+bool plat_cpu_core_present(int core) -+{ -+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); -+ -+ if (!core) -+ return true; -+ launch += core * 2; /* 2 VPEs per core */ -+ if (!(launch->flags & LAUNCH_FREADY)) -+ return false; -+ if (launch->flags & (LAUNCH_FGO | LAUNCH_FGONE)) -+ return false; -+ return true; -+} -+ - void prom_soc_init(struct ralink_soc_info *soc_info) - { - void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); diff --git a/target/linux/ramips/patches-5.10/101-mt7621-timer.patch b/target/linux/ramips/patches-5.10/101-mt7621-timer.patch deleted file mode 100644 index 8528b71c88..0000000000 --- a/target/linux/ramips/patches-5.10/101-mt7621-timer.patch +++ /dev/null @@ -1,87 +0,0 @@ ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -7,6 +7,7 @@ - - #include - #include -+#include - - #include - #include -@@ -14,6 +15,7 @@ - #include - #include - #include -+#include - - #include - -@@ -175,6 +177,58 @@ bool plat_cpu_core_present(int core) - return true; - } - -+#define LPS_PREC 8 -+/* -+* Re-calibration lpj(loop-per-jiffy). -+* (derived from kernel/calibrate.c) -+*/ -+static int udelay_recal(void) -+{ -+ unsigned int i, lpj = 0; -+ unsigned long ticks, loopbit; -+ int lps_precision = LPS_PREC; -+ -+ lpj = (1<<12); -+ -+ while ((lpj <<= 1) != 0) { -+ /* wait for "start of" clock tick */ -+ ticks = jiffies; -+ while (ticks == jiffies) -+ /* nothing */; -+ -+ /* Go .. */ -+ ticks = jiffies; -+ __delay(lpj); -+ ticks = jiffies - ticks; -+ if (ticks) -+ break; -+ } -+ -+ /* -+ * Do a binary approximation to get lpj set to -+ * equal one clock (up to lps_precision bits) -+ */ -+ lpj >>= 1; -+ loopbit = lpj; -+ while (lps_precision-- && (loopbit >>= 1)) { -+ lpj |= loopbit; -+ ticks = jiffies; -+ while (ticks == jiffies) -+ /* nothing */; -+ ticks = jiffies; -+ __delay(lpj); -+ if (jiffies != ticks) /* longer than 1 tick */ -+ lpj &= ~loopbit; -+ } -+ printk(KERN_INFO "%d CPUs re-calibrate udelay(lpj = %d)\n", NR_CPUS, lpj); -+ -+ for(i=0; i< NR_CPUS; i++) -+ cpu_data[i].udelay_val = lpj; -+ -+ return 0; -+} -+device_initcall(udelay_recal); -+ - void prom_soc_init(struct ralink_soc_info *soc_info) - { - void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -58,6 +58,7 @@ choice - select CLKSRC_MIPS_GIC - select HAVE_PCI if PCI_MT7621 - select WEAK_REORDERING_BEYOND_LLSC -+ select GENERIC_CLOCKEVENTS_BROADCAST - endchoice - - choice diff --git a/target/linux/ramips/patches-5.10/102-mt7621-fix-cpu-clk-add-clkdev.patch b/target/linux/ramips/patches-5.10/102-mt7621-fix-cpu-clk-add-clkdev.patch deleted file mode 100644 index 0c997a3f28..0000000000 --- a/target/linux/ramips/patches-5.10/102-mt7621-fix-cpu-clk-add-clkdev.patch +++ /dev/null @@ -1,224 +0,0 @@ ---- a/arch/mips/include/asm/mach-ralink/mt7621.h -+++ b/arch/mips/include/asm/mach-ralink/mt7621.h -@@ -17,6 +17,10 @@ - #define SYSC_REG_CHIP_REV 0x0c - #define SYSC_REG_SYSTEM_CONFIG0 0x10 - #define SYSC_REG_SYSTEM_CONFIG1 0x14 -+#define SYSC_REG_CLKCFG0 0x2c -+#define SYSC_REG_CUR_CLK_STS 0x44 -+ -+#define MEMC_REG_CPU_PLL 0x648 - - #define CHIP_REV_PKG_MASK 0x1 - #define CHIP_REV_PKG_SHIFT 16 -@@ -24,6 +28,22 @@ - #define CHIP_REV_VER_SHIFT 8 - #define CHIP_REV_ECO_MASK 0xf - -+#define XTAL_MODE_SEL_MASK 0x7 -+#define XTAL_MODE_SEL_SHIFT 6 -+ -+#define CPU_CLK_SEL_MASK 0x3 -+#define CPU_CLK_SEL_SHIFT 30 -+ -+#define CUR_CPU_FDIV_MASK 0x1f -+#define CUR_CPU_FDIV_SHIFT 8 -+#define CUR_CPU_FFRAC_MASK 0x1f -+#define CUR_CPU_FFRAC_SHIFT 0 -+ -+#define CPU_PLL_PREDIV_MASK 0x3 -+#define CPU_PLL_PREDIV_SHIFT 12 -+#define CPU_PLL_FBDIV_MASK 0x7f -+#define CPU_PLL_FBDIV_SHIFT 4 -+ - #define MT7621_DRAM_BASE 0x0 - #define MT7621_DDR2_SIZE_MIN 32 - #define MT7621_DDR2_SIZE_MAX 256 ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -8,6 +8,10 @@ - #include - #include - #include -+#include -+#include -+#include -+#include - - #include - #include -@@ -16,16 +20,12 @@ - #include - #include - #include -+#include - - #include - - #include "common.h" - --#define SYSC_REG_SYSCFG 0x10 --#define SYSC_REG_CPLL_CLKCFG0 0x2c --#define SYSC_REG_CUR_CLK_STS 0x44 --#define CPU_CLK_SEL (BIT(30) | BIT(31)) -- - #define MT7621_GPIO_MODE_UART1 1 - #define MT7621_GPIO_MODE_I2C 2 - #define MT7621_GPIO_MODE_UART3_MASK 0x3 -@@ -111,49 +111,89 @@ static struct rt2880_pmx_group mt7621_pi - { 0 } - }; - -+static struct clk *clks[MT7621_CLK_MAX]; -+static struct clk_onecell_data clk_data = { -+ .clks = clks, -+ .clk_num = ARRAY_SIZE(clks), -+}; -+ - phys_addr_t mips_cpc_default_phys_base(void) - { - panic("Cannot detect cpc address"); - } - --void __init ralink_clk_init(void) -+static struct clk *__init mt7621_add_sys_clkdev( -+ const char *id, unsigned long rate) - { -- int cpu_fdiv = 0; -- int cpu_ffrac = 0; -- int fbdiv = 0; -- u32 clk_sts, syscfg; -- u8 clk_sel = 0, xtal_mode; -- u32 cpu_clk; -+ struct clk *clk; -+ int err; -+ -+ clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate); -+ if (IS_ERR(clk)) -+ panic("failed to allocate %s clock structure", id); -+ -+ err = clk_register_clkdev(clk, id, NULL); -+ if (err) -+ panic("unable to register %s clock device", id); - -- if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0) -- clk_sel = 1; -+ return clk; -+} -+ -+void __init ralink_clk_init(void) -+{ -+ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac; -+ u32 pll, prediv, fbdiv; -+ u32 xtal_clk, cpu_clk, bus_clk; -+ const static u32 prediv_tbl[] = {0, 1, 2, 2}; -+ -+ syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); -+ xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK; -+ -+ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0); -+ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK; -+ -+ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); -+ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK; -+ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK; -+ -+ if (xtal_sel <= 2) -+ xtal_clk = 20 * 1000 * 1000; -+ else if (xtal_sel <= 5) -+ xtal_clk = 40 * 1000 * 1000; -+ else -+ xtal_clk = 25 * 1000 * 1000; - - switch (clk_sel) { - case 0: -- clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); -- cpu_fdiv = ((clk_sts >> 8) & 0x1F); -- cpu_ffrac = (clk_sts & 0x1F); -- cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000; -+ cpu_clk = 500 * 1000 * 1000; - break; -- - case 1: -- fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1; -- syscfg = rt_sysc_r32(SYSC_REG_SYSCFG); -- xtal_mode = (syscfg >> 6) & 0x7; -- if (xtal_mode >= 6) { -- /* 25Mhz Xtal */ -- cpu_clk = 25 * fbdiv * 1000 * 1000; -- } else if (xtal_mode >= 3) { -- /* 40Mhz Xtal */ -- cpu_clk = 40 * fbdiv * 1000 * 1000; -- } else { -- /* 20Mhz Xtal */ -- cpu_clk = 20 * fbdiv * 1000 * 1000; -- } -+ pll = rt_memc_r32(MEMC_REG_CPU_PLL); -+ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK; -+ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK; -+ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv]; - break; -+ default: -+ cpu_clk = xtal_clk; - } -+ -+ cpu_clk = cpu_clk / ffiv * ffrac; -+ bus_clk = cpu_clk / 4; -+ -+ clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk); -+ clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk); -+ -+ pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000); -+ mips_hpt_frequency = cpu_clk / 2; - } - -+static void __init mt7621_clocks_init_dt(struct device_node *np) -+{ -+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -+} -+ -+CLK_OF_DECLARE(ar7100, "mediatek,mt7621-pll", mt7621_clocks_init_dt); -+ - void __init ralink_of_remap(void) - { - rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc"); ---- a/arch/mips/ralink/timer-gic.c -+++ b/arch/mips/ralink/timer-gic.c -@@ -9,14 +9,14 @@ - - #include - #include --#include -+#include - - #include "common.h" - - void __init plat_time_init(void) - { - ralink_of_remap(); -- -+ ralink_clk_init(); - of_clk_init(NULL); - timer_probe(); - } ---- /dev/null -+++ b/include/dt-bindings/clock/mt7621-clk.h -@@ -0,0 +1,18 @@ -+/* -+ * Copyright (C) 2018 Weijie Gao -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#ifndef __DT_BINDINGS_MT7621_CLK_H -+#define __DT_BINDINGS_MT7621_CLK_H -+ -+#define MT7621_CLK_CPU 0 -+#define MT7621_CLK_BUS 1 -+ -+#define MT7621_CLK_MAX 2 -+ -+#endif /* __DT_BINDINGS_MT7621_CLK_H */ diff --git a/target/linux/ramips/patches-5.10/105-mt7621-memory-detect.patch b/target/linux/ramips/patches-5.10/105-mt7621-memory-detect.patch deleted file mode 100644 index 08b4b0de29..0000000000 --- a/target/linux/ramips/patches-5.10/105-mt7621-memory-detect.patch +++ /dev/null @@ -1,125 +0,0 @@ -From b5a52351a66f3c2a7a207548aa87d78ff2d336c0 Mon Sep 17 00:00:00 2001 -From: Chuanhong Guo -Date: Wed, 10 Jul 2019 00:24:48 +0800 -Subject: [PATCH] MIPS: ralink: mt7621: add memory detection support - -mt7621 has the following memory map: -0x0-0x1c000000: lower 448m memory -0x1c000000-0x2000000: peripheral registers -0x20000000-0x2400000: higher 64m memory - -detect_memory_region in arch/mips/kernel/setup.c only add the first -memory region and isn't suitable for 512m memory detection because -it may accidentally read the memory area for peripheral registers. - -This commit adds memory detection capability for mt7621: -1. add the highmem area when 512m is detected. -2. guard memcmp from accessing peripheral registers: - This only happens when some weird user decided to change - kernel load address to 256m or higher address. Since this - is a quite unusual case, we just skip 512m testing and return - 256m as memory size. - -Signed-off-by: Chuanhong Guo ---- - arch/mips/include/asm/mach-ralink/mt7621.h | 7 ++--- - arch/mips/ralink/mt7621.c | 30 +++++++++++++++++++--- - 2 files changed, 30 insertions(+), 7 deletions(-) - ---- a/arch/mips/include/asm/mach-ralink/mt7621.h -+++ b/arch/mips/include/asm/mach-ralink/mt7621.h -@@ -44,9 +44,10 @@ - #define CPU_PLL_FBDIV_MASK 0x7f - #define CPU_PLL_FBDIV_SHIFT 4 - --#define MT7621_DRAM_BASE 0x0 --#define MT7621_DDR2_SIZE_MIN 32 --#define MT7621_DDR2_SIZE_MAX 256 -+#define MT7621_LOWMEM_BASE 0x0 -+#define MT7621_LOWMEM_MAX_SIZE 0x1C000000 -+#define MT7621_HIGHMEM_BASE 0x20000000 -+#define MT7621_HIGHMEM_SIZE 0x4000000 - - #define MT7621_CHIP_NAME0 0x3637544D - #define MT7621_CHIP_NAME1 0x20203132 ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -13,6 +13,7 @@ - #include - #include - -+#include - #include - #include - #include -@@ -55,6 +56,8 @@ - #define MT7621_GPIO_MODE_SDHCI_SHIFT 18 - #define MT7621_GPIO_MODE_SDHCI_GPIO 1 - -+static void *detect_magic __initdata = detect_memory_region; -+ - static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) }; - static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) }; - static struct rt2880_pmx_func uart3_grp[] = { -@@ -139,6 +142,28 @@ static struct clk *__init mt7621_add_sys - return clk; - } - -+void __init mt7621_memory_detect(void) -+{ -+ void *dm = &detect_magic; -+ phys_addr_t size; -+ -+ for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) { -+ if (!memcmp(dm, dm + size, sizeof(detect_magic))) -+ break; -+ } -+ -+ if ((size == 256 * SZ_1M) && -+ (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) && -+ memcmp(dm, dm + size, sizeof(detect_magic))) { -+ add_memory_region(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE, -+ BOOT_MEM_RAM); -+ add_memory_region(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE, -+ BOOT_MEM_RAM); -+ } else { -+ add_memory_region(MT7621_LOWMEM_BASE, size, BOOT_MEM_RAM); -+ } -+} -+ - void __init ralink_clk_init(void) - { - u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac; -@@ -317,10 +342,7 @@ void prom_soc_init(struct ralink_soc_inf - (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, - (rev & CHIP_REV_ECO_MASK)); - -- soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN; -- soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX; -- soc_info->mem_base = MT7621_DRAM_BASE; -- -+ soc_info->mem_detect = mt7621_memory_detect; - rt2880_pinmux_data = mt7621_pinmux_data; - - ---- a/arch/mips/ralink/common.h -+++ b/arch/mips/ralink/common.h -@@ -17,6 +17,7 @@ struct ralink_soc_info { - unsigned long mem_size; - unsigned long mem_size_min; - unsigned long mem_size_max; -+ void (*mem_detect)(void); - }; - extern struct ralink_soc_info soc_info; - ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -87,6 +87,8 @@ void __init plat_mem_setup(void) - of_scan_flat_dt(early_init_dt_find_memory, NULL); - if (memory_dtb) - of_scan_flat_dt(early_init_dt_scan_memory, NULL); -+ else if (soc_info.mem_detect) -+ soc_info.mem_detect(); - else if (soc_info.mem_size) - add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, - BOOT_MEM_RAM); diff --git a/target/linux/ramips/patches-5.10/110-mt7621-perfctr-fix.patch b/target/linux/ramips/patches-5.10/110-mt7621-perfctr-fix.patch deleted file mode 100644 index dfeac7eb99..0000000000 --- a/target/linux/ramips/patches-5.10/110-mt7621-perfctr-fix.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/mips/ralink/irq-gic.c -+++ b/arch/mips/ralink/irq-gic.c -@@ -13,6 +13,12 @@ - - int get_c0_perfcount_int(void) - { -+ /* -+ * Performance counter events are routed through GIC. -+ * Prevent them from firing on CPU IRQ7 as well -+ */ -+ clear_c0_status(IE_SW0 << 7); -+ - return gic_get_c0_perfcount_int(); - } - EXPORT_SYMBOL_GPL(get_c0_perfcount_int); diff --git a/target/linux/ramips/patches-5.10/202-weak_reordering.patch b/target/linux/ramips/patches-5.10/202-weak_reordering.patch new file mode 100644 index 0000000000..fe3fdec289 --- /dev/null +++ b/target/linux/ramips/patches-5.10/202-weak_reordering.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -57,6 +57,7 @@ choice + select COMMON_CLK + select CLKSRC_MIPS_GIC + select HAVE_PCI if PCI_MT7621 ++ select WEAK_REORDERING_BEYOND_LLSC + endchoice + + choice diff --git a/target/linux/ramips/patches-5.10/302-spi-nor-add-gd25q512.patch b/target/linux/ramips/patches-5.10/302-spi-nor-add-gd25q512.patch deleted file mode 100644 index 7fcf0c54b6..0000000000 --- a/target/linux/ramips/patches-5.10/302-spi-nor-add-gd25q512.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -2303,6 +2303,11 @@ static const struct flash_info spi_nor_i - SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - .fixups = &gd25q256_fixups, - }, -+ { -+ "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024, -+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | -+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4B_OPCODES) -+ }, - - /* Intel/Numonyx -- xxxs33b */ - { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, diff --git a/target/linux/ramips/patches-5.10/310-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch b/target/linux/ramips/patches-5.10/310-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch new file mode 100644 index 0000000000..63429f49b0 --- /dev/null +++ b/target/linux/ramips/patches-5.10/310-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch @@ -0,0 +1,45 @@ +From: Tobias Wolf +Subject: [v2] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups + +Commit 67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new +issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is +not. As the prerequisite of custom memory map has been removed, this results +in the full memory range of 0x0 - 0x8000000 to be marked as reserved for this +platform. + +v2: Correctly compare that usermem is not null. + +This patch adds the originally intended prerequisite again. + +Signed-off-by: Tobias Wolf +--- + +--- a/arch/mips/kernel/setup.c ++++ b/arch/mips/kernel/setup.c +@@ -287,6 +287,8 @@ static unsigned long __init init_initrd( + * Initialize the bootmem allocator. It also setup initrd related data + * if needed. + */ ++static int usermem __initdata; ++ + #if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA)) + + static void __init bootmem_init(void) +@@ -325,7 +327,7 @@ static void __init bootmem_init(void) + /* + * Reserve any memory between the start of RAM and PHYS_OFFSET + */ +- if (ramstart > PHYS_OFFSET) ++ if (usermem && ramstart > PHYS_OFFSET) + memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET); + + if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) { +@@ -386,8 +388,6 @@ static void __init bootmem_init(void) + + #endif /* CONFIG_SGI_IP27 */ + +-static int usermem __initdata; +- + static int __init early_parse_mem(char *p) + { + phys_addr_t start, size; diff --git a/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch new file mode 100644 index 0000000000..773c74f4e9 --- /dev/null +++ b/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch @@ -0,0 +1,82 @@ +From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 14 Jul 2013 23:08:11 +0200 +Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k + irq + +Signed-off-by: John Crispin +--- + arch/mips/ralink/Kconfig | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -1,12 +1,17 @@ + # SPDX-License-Identifier: GPL-2.0 + if RALINK + ++config CEVT_SYSTICK_QUIRK ++ bool ++ default n ++ + config CLKEVT_RT3352 + bool + depends on SOC_RT305X || SOC_MT7620 + default y + select TIMER_OF + select CLKSRC_MMIO ++ select CEVT_SYSTICK_QUIRK + + config RALINK_ILL_ACC + bool +--- a/arch/mips/kernel/cevt-r4k.c ++++ b/arch/mips/kernel/cevt-r4k.c +@@ -15,6 +15,26 @@ + #include + #include + ++static int mips_state_oneshot(struct clock_event_device *evt) ++{ ++ if (!cp0_timer_irq_installed) { ++ cp0_timer_irq_installed = 1; ++ setup_irq(evt->irq, &c0_compare_irqaction); ++ } ++ ++ return 0; ++} ++ ++static int mips_state_shutdown(struct clock_event_device *evt) ++{ ++ if (cp0_timer_irq_installed) { ++ cp0_timer_irq_installed = 0; ++ remove_irq(evt->irq, &c0_compare_irqaction); ++ } ++ ++ return 0; ++} ++ + static int mips_next_event(unsigned long delta, + struct clock_event_device *evt) + { +@@ -281,17 +301,21 @@ int r4k_clockevent_init(void) + cd->rating = 300; + cd->irq = irq; + cd->cpumask = cpumask_of(cpu); ++ cd->set_state_shutdown = mips_state_shutdown; ++ cd->set_state_oneshot = mips_state_oneshot; + cd->set_next_event = mips_next_event; + cd->event_handler = mips_event_handler; + + clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff); + ++#ifndef CONFIG_CEVT_SYSTICK_QUIRK + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + setup_irq(irq, &c0_compare_irqaction); ++#endif + + return 0; + } diff --git a/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch new file mode 100644 index 0000000000..a3b8e4d250 --- /dev/null +++ b/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch @@ -0,0 +1,200 @@ +From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 28 Jul 2013 16:26:41 +0200 +Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling + +This feature will break udelay() and cause the delay loop to have longer delays +when the frequency is scaled causing a performance hit. + +Signed-off-by: John Crispin +--- + arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++ + 1 file changed, 38 insertions(+) + +--- a/arch/mips/ralink/cevt-rt3352.c ++++ b/arch/mips/ralink/cevt-rt3352.c +@@ -29,6 +29,10 @@ + /* enable the counter */ + #define CFG_CNT_EN 0x1 + ++/* mt7620 frequency scaling defines */ ++#define CLK_LUT_CFG 0x40 ++#define SLEEP_EN BIT(31) ++ + struct systick_device { + void __iomem *membase; + struct clock_event_device dev; +@@ -36,21 +40,53 @@ struct systick_device { + int freq_scale; + }; + ++static void (*systick_freq_scaling)(struct systick_device *sdev, int status); ++ + static int systick_set_oneshot(struct clock_event_device *evt); + static int systick_shutdown(struct clock_event_device *evt); + ++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status) ++{ ++ if (sdev->freq_scale == status) ++ return; ++ ++ sdev->freq_scale = status; ++ ++ pr_info("%s: %s autosleep mode\n", sdev->dev.name, ++ (status) ? ("enable") : ("disable")); ++ if (status) ++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG); ++ else ++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG); ++} ++ ++static inline unsigned int read_count(struct systick_device *sdev) ++{ ++ return ioread32(sdev->membase + SYSTICK_COUNT); ++} ++ ++static inline unsigned int read_compare(struct systick_device *sdev) ++{ ++ return ioread32(sdev->membase + SYSTICK_COMPARE); ++} ++ ++static inline void write_compare(struct systick_device *sdev, unsigned int val) ++{ ++ iowrite32(val, sdev->membase + SYSTICK_COMPARE); ++} ++ + static int systick_next_event(unsigned long delta, + struct clock_event_device *evt) + { + struct systick_device *sdev; +- u32 count; ++ int res; + + sdev = container_of(evt, struct systick_device, dev); +- count = ioread32(sdev->membase + SYSTICK_COUNT); +- count = (count + delta) % SYSTICK_FREQ; +- iowrite32(count, sdev->membase + SYSTICK_COMPARE); ++ delta += read_count(sdev); ++ write_compare(sdev, delta); ++ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0; + +- return 0; ++ return res; + } + + static void systick_event_handler(struct clock_event_device *dev) +@@ -60,20 +96,25 @@ static void systick_event_handler(struct + + static irqreturn_t systick_interrupt(int irq, void *dev_id) + { +- struct clock_event_device *dev = (struct clock_event_device *) dev_id; ++ int ret = 0; ++ struct clock_event_device *cdev; ++ struct systick_device *sdev; + +- dev->event_handler(dev); ++ if (read_c0_cause() & STATUSF_IP7) { ++ cdev = (struct clock_event_device *) dev_id; ++ sdev = container_of(cdev, struct systick_device, dev); ++ ++ /* Clear Count/Compare Interrupt */ ++ write_compare(sdev, read_compare(sdev)); ++ cdev->event_handler(cdev); ++ ret = 1; ++ } + +- return IRQ_HANDLED; ++ return IRQ_RETVAL(ret); + } + + static struct systick_device systick = { + .dev = { +- /* +- * cevt-r4k uses 300, make sure systick +- * gets used if available +- */ +- .rating = 310, + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = systick_next_event, + .set_state_shutdown = systick_shutdown, +@@ -95,9 +136,15 @@ static int systick_shutdown(struct clock + sdev = container_of(evt, struct systick_device, dev); + + if (sdev->irq_requested) +- free_irq(systick.dev.irq, &systick_irqaction); ++ remove_irq(systick.dev.irq, &systick_irqaction); + sdev->irq_requested = 0; +- iowrite32(0, systick.membase + SYSTICK_CONFIG); ++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG); ++ ++ if (systick_freq_scaling) ++ systick_freq_scaling(sdev, 0); ++ ++ if (systick_freq_scaling) ++ systick_freq_scaling(sdev, 1); + + return 0; + } +@@ -117,34 +164,48 @@ static int systick_set_oneshot(struct cl + return 0; + } + ++static const struct of_device_id systick_match[] = { ++ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling}, ++ {}, ++}; ++ + static int __init ralink_systick_init(struct device_node *np) + { ++ const struct of_device_id *match; ++ int rating = 200; + int ret; + + systick.membase = of_iomap(np, 0); + if (!systick.membase) + return -ENXIO; + +- systick_irqaction.name = np->name; +- systick.dev.name = np->name; +- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60); +- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev); +- systick.dev.max_delta_ticks = 0x7fff; +- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev); +- systick.dev.min_delta_ticks = 0x3; ++ match = of_match_node(systick_match, np); ++ if (match) { ++ systick_freq_scaling = match->data; ++ /* ++ * cevt-r4k uses 300, make sure systick ++ * gets used if available ++ */ ++ rating = 310; ++ } ++ ++ /* enable counter than register clock source */ ++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG); ++ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name, ++ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up); ++ ++ /* register clock event */ + systick.dev.irq = irq_of_parse_and_map(np, 0); + if (!systick.dev.irq) { + pr_err("%pOFn: request_irq failed", np); + return -EINVAL; + } + +- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name, +- SYSTICK_FREQ, 301, 16, +- clocksource_mmio_readl_up); +- if (ret) +- return ret; +- +- clockevents_register_device(&systick.dev); ++ systick_irqaction.name = np->name; ++ systick.dev.name = np->name; ++ systick.dev.rating = rating; ++ systick.dev.cpumask = cpumask_of(0); ++ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff); + + pr_info("%pOFn: running - mult: %d, shift: %d\n", + np, systick.dev.mult, systick.dev.shift); diff --git a/target/linux/ramips/patches-5.10/313-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-5.10/313-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch new file mode 100644 index 0000000000..54af571d85 --- /dev/null +++ b/target/linux/ramips/patches-5.10/313-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch @@ -0,0 +1,21 @@ +From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 4 Aug 2014 18:46:02 +0200 +Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree + +Signed-off-by: John Crispin +--- + arch/mips/ralink/of.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -80,6 +80,8 @@ void __init plat_mem_setup(void) + + __dt_setup_arch(dtb); + ++ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); ++ + of_scan_flat_dt(early_init_dt_find_memory, NULL); + if (memory_dtb) + of_scan_flat_dt(early_init_dt_scan_memory, NULL); diff --git a/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch b/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch new file mode 100644 index 0000000000..c19a0fb480 --- /dev/null +++ b/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch @@ -0,0 +1,63 @@ +From f15d27f9c90ede4b16eb37f9ae573ef81c2b6996 Mon Sep 17 00:00:00 2001 +From: David Bauer +Date: Thu, 31 Dec 2020 18:49:12 +0100 +Subject: [PATCH] MIPS: add bootargs-override property + +Add support for the bootargs-override property to the chosen node +similar to the one used on ipq806x or mpc85xx. + +This is necessary, as the U-Boot used on some boards, notably the +Ubiquiti UniFi 6 Lite, overwrite the bootargs property of the chosen +node leading to a kernel panic when loading OpenWrt. + +Signed-off-by: David Bauer +--- + arch/mips/kernel/setup.c | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +--- a/arch/mips/kernel/setup.c ++++ b/arch/mips/kernel/setup.c +@@ -571,8 +571,28 @@ static int __init bootcmdline_scan_chose + return 1; + } + ++static int __init bootcmdline_scan_chosen_override(unsigned long node, const char *uname, ++ int depth, void *data) ++{ ++ bool *dt_bootargs = data; ++ const char *p; ++ int l; ++ ++ if (depth != 1 || !data || strcmp(uname, "chosen") != 0) ++ return 0; ++ ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l); ++ if (p != NULL && l > 0) { ++ strlcpy(boot_command_line, p, COMMAND_LINE_SIZE); ++ *dt_bootargs = true; ++ } ++ ++ return 1; ++} ++ + static void __init bootcmdline_init(char **cmdline_p) + { ++ bool dt_bootargs_override = false; + bool dt_bootargs = false; + + /* +@@ -586,6 +606,14 @@ static void __init bootcmdline_init(char + } + + /* ++ * If bootargs-override in the chosen node is set, use this as the ++ * command line ++ */ ++ of_scan_flat_dt(bootcmdline_scan_chosen_override, &dt_bootargs_override); ++ if (dt_bootargs_override) ++ return; ++ ++ /* + * If the user specified a built-in command line & + * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is + * prepended to arguments from the bootloader or DT so we'll copy them diff --git a/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch new file mode 100644 index 0000000000..bedea14506 --- /dev/null +++ b/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch @@ -0,0 +1,29 @@ +From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 7 Dec 2015 17:15:32 +0100 +Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue + +Signed-off-by: John Crispin +--- + arch/mips/kernel/setup.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/kernel/setup.c ++++ b/arch/mips/kernel/setup.c +@@ -723,8 +723,6 @@ static void __init arch_mem_init(char ** + memblock_reserve(crashk_res.start, + crashk_res.end - crashk_res.start + 1); + #endif +- device_tree_init(); +- + /* + * In order to reduce the possibility of kernel panic when failed to + * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate +@@ -841,6 +839,7 @@ void __init setup_arch(char **cmdline_p) + + cpu_cache_init(); + paging_init(); ++ device_tree_init(); + } + + unsigned long kernelsp[NR_CPUS]; diff --git a/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch new file mode 100644 index 0000000000..1dc54ccf23 --- /dev/null +++ b/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch @@ -0,0 +1,25 @@ +From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 7 Dec 2015 17:18:05 +0100 +Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by + default + +Signed-off-by: John Crispin +--- + arch/mips/ralink/Kconfig | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -14,9 +14,9 @@ config CLKEVT_RT3352 + select CEVT_SYSTICK_QUIRK + + config RALINK_ILL_ACC +- bool ++ bool "illegal access irq" + depends on SOC_RT305X +- default y ++ default n + + config IRQ_INTC + bool diff --git a/target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch b/target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch new file mode 100644 index 0000000000..1c8b61f8ef --- /dev/null +++ b/target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch @@ -0,0 +1,61 @@ +There is a variant of MT7621 which contains only one CPU core instead of 2. +This is not reflected in the config register, so the kernel detects more +physical cores, which leads to a hang on SMP bringup. +Add a hack to detect missing cores. + +Signed-off-by: Felix Fietkau + +--- a/arch/mips/kernel/smp-cps.c ++++ b/arch/mips/kernel/smp-cps.c +@@ -43,6 +43,11 @@ static unsigned core_vpe_count(unsigned + return mips_cps_numvps(cluster, core); + } + ++bool __weak plat_cpu_core_present(int core) ++{ ++ return true; ++} ++ + static void __init cps_smp_setup(void) + { + unsigned int nclusters, ncores, nvpes, core_vpes; +@@ -60,6 +65,8 @@ static void __init cps_smp_setup(void) + + ncores = mips_cps_numcores(cl); + for (c = 0; c < ncores; c++) { ++ if (!plat_cpu_core_present(c)) ++ continue; + core_vpes = core_vpe_count(cl, c); + + if (c > 0) +--- a/arch/mips/ralink/mt7621.c ++++ b/arch/mips/ralink/mt7621.c +@@ -13,6 +13,7 @@ + #include + #include + #include ++#include + + #include + +@@ -160,6 +161,20 @@ void __init ralink_of_remap(void) + panic("Failed to remap core resources"); + } + ++bool plat_cpu_core_present(int core) ++{ ++ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); ++ ++ if (!core) ++ return true; ++ launch += core * 2; /* 2 VPEs per core */ ++ if (!(launch->flags & LAUNCH_FREADY)) ++ return false; ++ if (launch->flags & (LAUNCH_FGO | LAUNCH_FGONE)) ++ return false; ++ return true; ++} ++ + void prom_soc_init(struct ralink_soc_info *soc_info) + { + void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); diff --git a/target/linux/ramips/patches-5.10/321-mt7621-timer.patch b/target/linux/ramips/patches-5.10/321-mt7621-timer.patch new file mode 100644 index 0000000000..8528b71c88 --- /dev/null +++ b/target/linux/ramips/patches-5.10/321-mt7621-timer.patch @@ -0,0 +1,87 @@ +--- a/arch/mips/ralink/mt7621.c ++++ b/arch/mips/ralink/mt7621.c +@@ -7,6 +7,7 @@ + + #include + #include ++#include + + #include + #include +@@ -14,6 +15,7 @@ + #include + #include + #include ++#include + + #include + +@@ -175,6 +177,58 @@ bool plat_cpu_core_present(int core) + return true; + } + ++#define LPS_PREC 8 ++/* ++* Re-calibration lpj(loop-per-jiffy). ++* (derived from kernel/calibrate.c) ++*/ ++static int udelay_recal(void) ++{ ++ unsigned int i, lpj = 0; ++ unsigned long ticks, loopbit; ++ int lps_precision = LPS_PREC; ++ ++ lpj = (1<<12); ++ ++ while ((lpj <<= 1) != 0) { ++ /* wait for "start of" clock tick */ ++ ticks = jiffies; ++ while (ticks == jiffies) ++ /* nothing */; ++ ++ /* Go .. */ ++ ticks = jiffies; ++ __delay(lpj); ++ ticks = jiffies - ticks; ++ if (ticks) ++ break; ++ } ++ ++ /* ++ * Do a binary approximation to get lpj set to ++ * equal one clock (up to lps_precision bits) ++ */ ++ lpj >>= 1; ++ loopbit = lpj; ++ while (lps_precision-- && (loopbit >>= 1)) { ++ lpj |= loopbit; ++ ticks = jiffies; ++ while (ticks == jiffies) ++ /* nothing */; ++ ticks = jiffies; ++ __delay(lpj); ++ if (jiffies != ticks) /* longer than 1 tick */ ++ lpj &= ~loopbit; ++ } ++ printk(KERN_INFO "%d CPUs re-calibrate udelay(lpj = %d)\n", NR_CPUS, lpj); ++ ++ for(i=0; i< NR_CPUS; i++) ++ cpu_data[i].udelay_val = lpj; ++ ++ return 0; ++} ++device_initcall(udelay_recal); ++ + void prom_soc_init(struct ralink_soc_info *soc_info) + { + void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -58,6 +58,7 @@ choice + select CLKSRC_MIPS_GIC + select HAVE_PCI if PCI_MT7621 + select WEAK_REORDERING_BEYOND_LLSC ++ select GENERIC_CLOCKEVENTS_BROADCAST + endchoice + + choice diff --git a/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch b/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch new file mode 100644 index 0000000000..0c997a3f28 --- /dev/null +++ b/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch @@ -0,0 +1,224 @@ +--- a/arch/mips/include/asm/mach-ralink/mt7621.h ++++ b/arch/mips/include/asm/mach-ralink/mt7621.h +@@ -17,6 +17,10 @@ + #define SYSC_REG_CHIP_REV 0x0c + #define SYSC_REG_SYSTEM_CONFIG0 0x10 + #define SYSC_REG_SYSTEM_CONFIG1 0x14 ++#define SYSC_REG_CLKCFG0 0x2c ++#define SYSC_REG_CUR_CLK_STS 0x44 ++ ++#define MEMC_REG_CPU_PLL 0x648 + + #define CHIP_REV_PKG_MASK 0x1 + #define CHIP_REV_PKG_SHIFT 16 +@@ -24,6 +28,22 @@ + #define CHIP_REV_VER_SHIFT 8 + #define CHIP_REV_ECO_MASK 0xf + ++#define XTAL_MODE_SEL_MASK 0x7 ++#define XTAL_MODE_SEL_SHIFT 6 ++ ++#define CPU_CLK_SEL_MASK 0x3 ++#define CPU_CLK_SEL_SHIFT 30 ++ ++#define CUR_CPU_FDIV_MASK 0x1f ++#define CUR_CPU_FDIV_SHIFT 8 ++#define CUR_CPU_FFRAC_MASK 0x1f ++#define CUR_CPU_FFRAC_SHIFT 0 ++ ++#define CPU_PLL_PREDIV_MASK 0x3 ++#define CPU_PLL_PREDIV_SHIFT 12 ++#define CPU_PLL_FBDIV_MASK 0x7f ++#define CPU_PLL_FBDIV_SHIFT 4 ++ + #define MT7621_DRAM_BASE 0x0 + #define MT7621_DDR2_SIZE_MIN 32 + #define MT7621_DDR2_SIZE_MAX 256 +--- a/arch/mips/ralink/mt7621.c ++++ b/arch/mips/ralink/mt7621.c +@@ -8,6 +8,10 @@ + #include + #include + #include ++#include ++#include ++#include ++#include + + #include + #include +@@ -16,16 +20,12 @@ + #include + #include + #include ++#include + + #include + + #include "common.h" + +-#define SYSC_REG_SYSCFG 0x10 +-#define SYSC_REG_CPLL_CLKCFG0 0x2c +-#define SYSC_REG_CUR_CLK_STS 0x44 +-#define CPU_CLK_SEL (BIT(30) | BIT(31)) +- + #define MT7621_GPIO_MODE_UART1 1 + #define MT7621_GPIO_MODE_I2C 2 + #define MT7621_GPIO_MODE_UART3_MASK 0x3 +@@ -111,49 +111,89 @@ static struct rt2880_pmx_group mt7621_pi + { 0 } + }; + ++static struct clk *clks[MT7621_CLK_MAX]; ++static struct clk_onecell_data clk_data = { ++ .clks = clks, ++ .clk_num = ARRAY_SIZE(clks), ++}; ++ + phys_addr_t mips_cpc_default_phys_base(void) + { + panic("Cannot detect cpc address"); + } + +-void __init ralink_clk_init(void) ++static struct clk *__init mt7621_add_sys_clkdev( ++ const char *id, unsigned long rate) + { +- int cpu_fdiv = 0; +- int cpu_ffrac = 0; +- int fbdiv = 0; +- u32 clk_sts, syscfg; +- u8 clk_sel = 0, xtal_mode; +- u32 cpu_clk; ++ struct clk *clk; ++ int err; ++ ++ clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate); ++ if (IS_ERR(clk)) ++ panic("failed to allocate %s clock structure", id); ++ ++ err = clk_register_clkdev(clk, id, NULL); ++ if (err) ++ panic("unable to register %s clock device", id); + +- if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0) +- clk_sel = 1; ++ return clk; ++} ++ ++void __init ralink_clk_init(void) ++{ ++ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac; ++ u32 pll, prediv, fbdiv; ++ u32 xtal_clk, cpu_clk, bus_clk; ++ const static u32 prediv_tbl[] = {0, 1, 2, 2}; ++ ++ syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); ++ xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK; ++ ++ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0); ++ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK; ++ ++ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); ++ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK; ++ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK; ++ ++ if (xtal_sel <= 2) ++ xtal_clk = 20 * 1000 * 1000; ++ else if (xtal_sel <= 5) ++ xtal_clk = 40 * 1000 * 1000; ++ else ++ xtal_clk = 25 * 1000 * 1000; + + switch (clk_sel) { + case 0: +- clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); +- cpu_fdiv = ((clk_sts >> 8) & 0x1F); +- cpu_ffrac = (clk_sts & 0x1F); +- cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000; ++ cpu_clk = 500 * 1000 * 1000; + break; +- + case 1: +- fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1; +- syscfg = rt_sysc_r32(SYSC_REG_SYSCFG); +- xtal_mode = (syscfg >> 6) & 0x7; +- if (xtal_mode >= 6) { +- /* 25Mhz Xtal */ +- cpu_clk = 25 * fbdiv * 1000 * 1000; +- } else if (xtal_mode >= 3) { +- /* 40Mhz Xtal */ +- cpu_clk = 40 * fbdiv * 1000 * 1000; +- } else { +- /* 20Mhz Xtal */ +- cpu_clk = 20 * fbdiv * 1000 * 1000; +- } ++ pll = rt_memc_r32(MEMC_REG_CPU_PLL); ++ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK; ++ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK; ++ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv]; + break; ++ default: ++ cpu_clk = xtal_clk; + } ++ ++ cpu_clk = cpu_clk / ffiv * ffrac; ++ bus_clk = cpu_clk / 4; ++ ++ clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk); ++ clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk); ++ ++ pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000); ++ mips_hpt_frequency = cpu_clk / 2; + } + ++static void __init mt7621_clocks_init_dt(struct device_node *np) ++{ ++ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); ++} ++ ++CLK_OF_DECLARE(ar7100, "mediatek,mt7621-pll", mt7621_clocks_init_dt); ++ + void __init ralink_of_remap(void) + { + rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc"); +--- a/arch/mips/ralink/timer-gic.c ++++ b/arch/mips/ralink/timer-gic.c +@@ -9,14 +9,14 @@ + + #include + #include +-#include ++#include + + #include "common.h" + + void __init plat_time_init(void) + { + ralink_of_remap(); +- ++ ralink_clk_init(); + of_clk_init(NULL); + timer_probe(); + } +--- /dev/null ++++ b/include/dt-bindings/clock/mt7621-clk.h +@@ -0,0 +1,18 @@ ++/* ++ * Copyright (C) 2018 Weijie Gao ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#ifndef __DT_BINDINGS_MT7621_CLK_H ++#define __DT_BINDINGS_MT7621_CLK_H ++ ++#define MT7621_CLK_CPU 0 ++#define MT7621_CLK_BUS 1 ++ ++#define MT7621_CLK_MAX 2 ++ ++#endif /* __DT_BINDINGS_MT7621_CLK_H */ diff --git a/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch b/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch new file mode 100644 index 0000000000..08b4b0de29 --- /dev/null +++ b/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch @@ -0,0 +1,125 @@ +From b5a52351a66f3c2a7a207548aa87d78ff2d336c0 Mon Sep 17 00:00:00 2001 +From: Chuanhong Guo +Date: Wed, 10 Jul 2019 00:24:48 +0800 +Subject: [PATCH] MIPS: ralink: mt7621: add memory detection support + +mt7621 has the following memory map: +0x0-0x1c000000: lower 448m memory +0x1c000000-0x2000000: peripheral registers +0x20000000-0x2400000: higher 64m memory + +detect_memory_region in arch/mips/kernel/setup.c only add the first +memory region and isn't suitable for 512m memory detection because +it may accidentally read the memory area for peripheral registers. + +This commit adds memory detection capability for mt7621: +1. add the highmem area when 512m is detected. +2. guard memcmp from accessing peripheral registers: + This only happens when some weird user decided to change + kernel load address to 256m or higher address. Since this + is a quite unusual case, we just skip 512m testing and return + 256m as memory size. + +Signed-off-by: Chuanhong Guo +--- + arch/mips/include/asm/mach-ralink/mt7621.h | 7 ++--- + arch/mips/ralink/mt7621.c | 30 +++++++++++++++++++--- + 2 files changed, 30 insertions(+), 7 deletions(-) + +--- a/arch/mips/include/asm/mach-ralink/mt7621.h ++++ b/arch/mips/include/asm/mach-ralink/mt7621.h +@@ -44,9 +44,10 @@ + #define CPU_PLL_FBDIV_MASK 0x7f + #define CPU_PLL_FBDIV_SHIFT 4 + +-#define MT7621_DRAM_BASE 0x0 +-#define MT7621_DDR2_SIZE_MIN 32 +-#define MT7621_DDR2_SIZE_MAX 256 ++#define MT7621_LOWMEM_BASE 0x0 ++#define MT7621_LOWMEM_MAX_SIZE 0x1C000000 ++#define MT7621_HIGHMEM_BASE 0x20000000 ++#define MT7621_HIGHMEM_SIZE 0x4000000 + + #define MT7621_CHIP_NAME0 0x3637544D + #define MT7621_CHIP_NAME1 0x20203132 +--- a/arch/mips/ralink/mt7621.c ++++ b/arch/mips/ralink/mt7621.c +@@ -13,6 +13,7 @@ + #include + #include + ++#include + #include + #include + #include +@@ -55,6 +56,8 @@ + #define MT7621_GPIO_MODE_SDHCI_SHIFT 18 + #define MT7621_GPIO_MODE_SDHCI_GPIO 1 + ++static void *detect_magic __initdata = detect_memory_region; ++ + static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) }; + static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) }; + static struct rt2880_pmx_func uart3_grp[] = { +@@ -139,6 +142,28 @@ static struct clk *__init mt7621_add_sys + return clk; + } + ++void __init mt7621_memory_detect(void) ++{ ++ void *dm = &detect_magic; ++ phys_addr_t size; ++ ++ for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) { ++ if (!memcmp(dm, dm + size, sizeof(detect_magic))) ++ break; ++ } ++ ++ if ((size == 256 * SZ_1M) && ++ (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) && ++ memcmp(dm, dm + size, sizeof(detect_magic))) { ++ add_memory_region(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE, ++ BOOT_MEM_RAM); ++ add_memory_region(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE, ++ BOOT_MEM_RAM); ++ } else { ++ add_memory_region(MT7621_LOWMEM_BASE, size, BOOT_MEM_RAM); ++ } ++} ++ + void __init ralink_clk_init(void) + { + u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac; +@@ -317,10 +342,7 @@ void prom_soc_init(struct ralink_soc_inf + (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, + (rev & CHIP_REV_ECO_MASK)); + +- soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN; +- soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX; +- soc_info->mem_base = MT7621_DRAM_BASE; +- ++ soc_info->mem_detect = mt7621_memory_detect; + rt2880_pinmux_data = mt7621_pinmux_data; + + +--- a/arch/mips/ralink/common.h ++++ b/arch/mips/ralink/common.h +@@ -17,6 +17,7 @@ struct ralink_soc_info { + unsigned long mem_size; + unsigned long mem_size_min; + unsigned long mem_size_max; ++ void (*mem_detect)(void); + }; + extern struct ralink_soc_info soc_info; + +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -87,6 +87,8 @@ void __init plat_mem_setup(void) + of_scan_flat_dt(early_init_dt_find_memory, NULL); + if (memory_dtb) + of_scan_flat_dt(early_init_dt_scan_memory, NULL); ++ else if (soc_info.mem_detect) ++ soc_info.mem_detect(); + else if (soc_info.mem_size) + add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, + BOOT_MEM_RAM); diff --git a/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch b/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch new file mode 100644 index 0000000000..dfeac7eb99 --- /dev/null +++ b/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch @@ -0,0 +1,15 @@ +--- a/arch/mips/ralink/irq-gic.c ++++ b/arch/mips/ralink/irq-gic.c +@@ -13,6 +13,12 @@ + + int get_c0_perfcount_int(void) + { ++ /* ++ * Performance counter events are routed through GIC. ++ * Prevent them from firing on CPU IRQ7 as well ++ */ ++ clear_c0_status(IE_SW0 << 7); ++ + return gic_get_c0_perfcount_int(); + } + EXPORT_SYMBOL_GPL(get_c0_perfcount_int); diff --git a/target/linux/ramips/patches-5.10/330-fix-pci-init-mt7620.patch b/target/linux/ramips/patches-5.10/330-fix-pci-init-mt7620.patch new file mode 100644 index 0000000000..7c00d4c9ae --- /dev/null +++ b/target/linux/ramips/patches-5.10/330-fix-pci-init-mt7620.patch @@ -0,0 +1,21 @@ +--- a/arch/mips/pci/pci-mt7620.c ++++ b/arch/mips/pci/pci-mt7620.c +@@ -32,6 +32,7 @@ + #define PPLL_CFG1 0x9c + + #define PPLL_DRV 0xa0 ++#define PPLL_LD BIT(23) + #define PDRV_SW_SET BIT(31) + #define LC_CKDRVPD BIT(19) + #define LC_CKDRVOHZ BIT(18) +@@ -239,8 +240,8 @@ static int mt7620_pci_hw_init(struct pla + rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); + mdelay(100); + +- if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) { +- dev_err(&pdev->dev, "MT7620 PPLL unlock\n"); ++ if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) { ++ dev_err(&pdev->dev, "MT7620 PPLL is unlocked, aborting init\n"); + reset_control_assert(rstpcie0); + rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); + return -1; diff --git a/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch new file mode 100644 index 0000000000..7011bbe50b --- /dev/null +++ b/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch @@ -0,0 +1,20 @@ +From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 15 Jul 2013 00:39:21 +0200 +Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write + +--- + drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -40,7 +40,7 @@ + #include + + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + #define MAX_RETRIES 3 + diff --git a/target/linux/ramips/patches-5.10/401-net-ethernet-mediatek-support-net-labels.patch b/target/linux/ramips/patches-5.10/401-net-ethernet-mediatek-support-net-labels.patch deleted file mode 100644 index 6583fca60b..0000000000 --- a/target/linux/ramips/patches-5.10/401-net-ethernet-mediatek-support-net-labels.patch +++ /dev/null @@ -1,34 +0,0 @@ -From bd0f89de5476ca25e73fae829ba3e1dafae1d90d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= -Date: Fri, 21 Jun 2019 10:04:05 +0200 -Subject: [PATCH] net: ethernet: mediatek: support net-labels - -With this patch, device name can be set within dts file in the same way as dsa -port can. -Add: label = "wan"; to GMAC node. - -Signed-off-by: René van Dorst ---- - drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -2922,6 +2922,7 @@ static const struct net_device_ops mtk_n - - static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) - { -+ const char *name = of_get_property(np, "label", NULL); - const __be32 *_id = of_get_property(np, "reg", NULL); - struct phylink *phylink; - int phy_mode, id, err; -@@ -3014,6 +3015,9 @@ static int mtk_add_mac(struct mtk_eth *e - - eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN; - -+ if (name) -+ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ); -+ - return 0; - - free_netdev: diff --git a/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch b/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch new file mode 100644 index 0000000000..ba844fed0f --- /dev/null +++ b/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch @@ -0,0 +1,1400 @@ +From e84e2430ee0e483842b4ff013ae8a6e7e2fa2734 Mon Sep 17 00:00:00 2001 +From: Weijie Gao +Date: Wed, 1 Apr 2020 02:07:58 +0800 +Subject: [PATCH 1/2] mtd: rawnand: add driver support for MT7621 nand + flash controller + +This patch adds NAND flash controller driver for MediaTek MT7621 SoC. + +The NAND flash controller is similar with controllers described in +mtk_nand.c, except that the controller from MT7621 doesn't support DMA +transmission, and some registers' offset and fields are different. + +Signed-off-by: Weijie Gao +--- + drivers/mtd/nand/raw/Kconfig | 8 + + drivers/mtd/nand/raw/Makefile | 1 + + drivers/mtd/nand/raw/mt7621_nand.c | 1348 ++++++++++++++++++++++++++++++++++++ + 3 files changed, 1357 insertions(+) + create mode 100644 drivers/mtd/nand/raw/mt7621_nand.c + +--- a/drivers/mtd/nand/raw/Kconfig ++++ b/drivers/mtd/nand/raw/Kconfig +@@ -391,6 +391,14 @@ config MTD_NAND_QCOM + Enables support for NAND flash chips on SoCs containing the EBI2 NAND + controller. This controller is found on IPQ806x SoC. + ++config MTD_NAND_MT7621 ++ tristate "MT7621 NAND controller" ++ depends on SOC_MT7621 || COMPILE_TEST ++ depends on HAS_IOMEM ++ help ++ Enables support for NAND controller on MT7621 SoC. ++ This driver uses PIO mode for data transmission instead of DMA mode. ++ + config MTD_NAND_MTK + tristate "MTK NAND controller" + depends on ARCH_MEDIATEK || COMPILE_TEST +--- a/drivers/mtd/nand/raw/Makefile ++++ b/drivers/mtd/nand/raw/Makefile +@@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n + obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o + obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ + obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o ++obj-$(CONFIG_MTD_NAND_MT7621) += mt7621_nand.o + obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o + obj-$(CONFIG_MTD_NAND_MXIC) += mxic_nand.o + obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o +--- /dev/null ++++ b/drivers/mtd/nand/raw/mt7621_nand.c +@@ -0,0 +1,1350 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * MediaTek MT7621 NAND Flash Controller driver ++ * ++ * Copyright (C) 2020 MediaTek Inc. All Rights Reserved. ++ * ++ * Author: Weijie Gao ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* NFI core registers */ ++#define NFI_CNFG 0x000 ++#define CNFG_OP_MODE_S 12 ++#define CNFG_OP_MODE_M GENMASK(14, 12) ++#define CNFG_OP_CUSTOM 6 ++#define CNFG_AUTO_FMT_EN BIT(9) ++#define CNFG_HW_ECC_EN BIT(8) ++#define CNFG_BYTE_RW BIT(6) ++#define CNFG_READ_MODE BIT(1) ++ ++#define NFI_PAGEFMT 0x004 ++#define PAGEFMT_FDM_ECC_S 12 ++#define PAGEFMT_FDM_ECC_M GENMASK(15, 12) ++#define PAGEFMT_FDM_S 8 ++#define PAGEFMT_FDM_M GENMASK(11, 8) ++#define PAGEFMT_SPARE_S 4 ++#define PAGEFMT_SPARE_M GENMASK(5, 4) ++#define PAGEFMT_PAGE_S 0 ++#define PAGEFMT_PAGE_M GENMASK(1, 0) ++ ++#define NFI_CON 0x008 ++#define CON_NFI_SEC_S 12 ++#define CON_NFI_SEC_M GENMASK(15, 12) ++#define CON_NFI_BWR BIT(9) ++#define CON_NFI_BRD BIT(8) ++#define CON_NFI_RST BIT(1) ++#define CON_FIFO_FLUSH BIT(0) ++ ++#define NFI_ACCCON 0x00c ++#define ACCCON_POECS_S 28 ++#define ACCCON_POECS_MAX 0x0f ++#define ACCCON_POECS_DEF 3 ++#define ACCCON_PRECS_S 22 ++#define ACCCON_PRECS_MAX 0x3f ++#define ACCCON_PRECS_DEF 3 ++#define ACCCON_C2R_S 16 ++#define ACCCON_C2R_MAX 0x3f ++#define ACCCON_C2R_DEF 7 ++#define ACCCON_W2R_S 12 ++#define ACCCON_W2R_MAX 0x0f ++#define ACCCON_W2R_DEF 7 ++#define ACCCON_WH_S 8 ++#define ACCCON_WH_MAX 0x0f ++#define ACCCON_WH_DEF 15 ++#define ACCCON_WST_S 4 ++#define ACCCON_WST_MAX 0x0f ++#define ACCCON_WST_DEF 15 ++#define ACCCON_WST_MIN 3 ++#define ACCCON_RLT_S 0 ++#define ACCCON_RLT_MAX 0x0f ++#define ACCCON_RLT_DEF 15 ++#define ACCCON_RLT_MIN 3 ++ ++#define NFI_CMD 0x020 ++ ++#define NFI_ADDRNOB 0x030 ++#define ADDR_ROW_NOB_S 4 ++#define ADDR_ROW_NOB_M GENMASK(6, 4) ++#define ADDR_COL_NOB_S 0 ++#define ADDR_COL_NOB_M GENMASK(2, 0) ++ ++#define NFI_COLADDR 0x034 ++#define NFI_ROWADDR 0x038 ++ ++#define NFI_STRDATA 0x040 ++#define STR_DATA BIT(0) ++ ++#define NFI_CNRNB 0x044 ++#define CB2R_TIME_S 4 ++#define CB2R_TIME_M GENMASK(7, 4) ++#define STR_CNRNB BIT(0) ++ ++#define NFI_DATAW 0x050 ++#define NFI_DATAR 0x054 ++ ++#define NFI_PIO_DIRDY 0x058 ++#define PIO_DIRDY BIT(0) ++ ++#define NFI_STA 0x060 ++#define STA_NFI_FSM_S 16 ++#define STA_NFI_FSM_M GENMASK(19, 16) ++#define STA_FSM_CUSTOM_DATA 14 ++#define STA_BUSY BIT(8) ++#define STA_ADDR BIT(1) ++#define STA_CMD BIT(0) ++ ++#define NFI_ADDRCNTR 0x070 ++#define SEC_CNTR_S 12 ++#define SEC_CNTR_M GENMASK(15, 12) ++#define SEC_ADDR_S 0 ++#define SEC_ADDR_M GENMASK(9, 0) ++ ++#define NFI_CSEL 0x090 ++#define CSEL_S 0 ++#define CSEL_M GENMASK(1, 0) ++ ++#define NFI_FDM0L 0x0a0 ++#define NFI_FDML(n) (0x0a0 + ((n) << 3)) ++ ++#define NFI_FDM0M 0x0a4 ++#define NFI_FDMM(n) (0x0a4 + ((n) << 3)) ++ ++#define NFI_MASTER_STA 0x210 ++#define MAS_ADDR GENMASK(11, 9) ++#define MAS_RD GENMASK(8, 6) ++#define MAS_WR GENMASK(5, 3) ++#define MAS_RDDLY GENMASK(2, 0) ++ ++/* ECC engine registers */ ++#define ECC_ENCCON 0x000 ++#define ENC_EN BIT(0) ++ ++#define ECC_ENCCNFG 0x004 ++#define ENC_CNFG_MSG_S 16 ++#define ENC_CNFG_MSG_M GENMASK(28, 16) ++#define ENC_MODE_S 4 ++#define ENC_MODE_M GENMASK(5, 4) ++#define ENC_MODE_NFI 1 ++#define ENC_TNUM_S 0 ++#define ENC_TNUM_M GENMASK(2, 0) ++ ++#define ECC_ENCIDLE 0x00c ++#define ENC_IDLE BIT(0) ++ ++#define ECC_DECCON 0x100 ++#define DEC_EN BIT(0) ++ ++#define ECC_DECCNFG 0x104 ++#define DEC_EMPTY_EN BIT(31) ++#define DEC_CS_S 16 ++#define DEC_CS_M GENMASK(28, 16) ++#define DEC_CON_S 12 ++#define DEC_CON_M GENMASK(13, 12) ++#define DEC_CON_EL 2 ++#define DEC_MODE_S 4 ++#define DEC_MODE_M GENMASK(5, 4) ++#define DEC_MODE_NFI 1 ++#define DEC_TNUM_S 0 ++#define DEC_TNUM_M GENMASK(2, 0) ++ ++#define ECC_DECIDLE 0x10c ++#define DEC_IDLE BIT(1) ++ ++#define ECC_DECENUM 0x114 ++#define ERRNUM_S 2 ++#define ERRNUM_M GENMASK(3, 0) ++ ++#define ECC_DECDONE 0x118 ++#define DEC_DONE7 BIT(7) ++#define DEC_DONE6 BIT(6) ++#define DEC_DONE5 BIT(5) ++#define DEC_DONE4 BIT(4) ++#define DEC_DONE3 BIT(3) ++#define DEC_DONE2 BIT(2) ++#define DEC_DONE1 BIT(1) ++#define DEC_DONE0 BIT(0) ++ ++#define ECC_DECEL(n) (0x11c + (n) * 4) ++#define DEC_EL_ODD_S 16 ++#define DEC_EL_EVEN_S 0 ++#define DEC_EL_M 0x1fff ++#define DEC_EL_BYTE_POS_S 3 ++#define DEC_EL_BIT_POS_M GENMASK(3, 0) ++ ++#define ECC_FDMADDR 0x13c ++ ++/* ENCIDLE and DECIDLE */ ++#define ECC_IDLE BIT(0) ++ ++#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \ ++ ((tpoecs) << ACCCON_POECS_S | (tprecs) << ACCCON_PRECS_S | \ ++ (tc2r) << ACCCON_C2R_S | (tw2r) << ACCCON_W2R_S | \ ++ (twh) << ACCCON_WH_S | (twst) << ACCCON_WST_S | (trlt)) ++ ++#define MASTER_STA_MASK (MAS_ADDR | MAS_RD | MAS_WR | \ ++ MAS_RDDLY) ++#define NFI_RESET_TIMEOUT 1000000 ++#define NFI_CORE_TIMEOUT 500000 ++#define ECC_ENGINE_TIMEOUT 500000 ++ ++#define ECC_SECTOR_SIZE 512 ++#define ECC_PARITY_BITS 13 ++ ++#define NFI_FDM_SIZE 8 ++ ++#define MT7621_NFC_NAME "mt7621-nand" ++ ++struct mt7621_nfc { ++ struct nand_controller controller; ++ struct nand_chip nand; ++ struct clk *nfi_clk; ++ struct device *dev; ++ ++ void __iomem *nfi_regs; ++ void __iomem *ecc_regs; ++ ++ u32 spare_per_sector; ++}; ++ ++static const u16 mt7621_nfi_page_size[] = { SZ_512, SZ_2K, SZ_4K }; ++static const u8 mt7621_nfi_spare_size[] = { 16, 26, 27, 28 }; ++static const u8 mt7621_ecc_strength[] = { 4, 6, 8, 10, 12 }; ++ ++static inline u32 nfi_read32(struct mt7621_nfc *nfc, u32 reg) ++{ ++ return readl(nfc->nfi_regs + reg); ++} ++ ++static inline void nfi_write32(struct mt7621_nfc *nfc, u32 reg, u32 val) ++{ ++ writel(val, nfc->nfi_regs + reg); ++} ++ ++static inline u16 nfi_read16(struct mt7621_nfc *nfc, u32 reg) ++{ ++ return readw(nfc->nfi_regs + reg); ++} ++ ++static inline void nfi_write16(struct mt7621_nfc *nfc, u32 reg, u16 val) ++{ ++ writew(val, nfc->nfi_regs + reg); ++} ++ ++static inline void ecc_write16(struct mt7621_nfc *nfc, u32 reg, u16 val) ++{ ++ writew(val, nfc->ecc_regs + reg); ++} ++ ++static inline u32 ecc_read32(struct mt7621_nfc *nfc, u32 reg) ++{ ++ return readl(nfc->ecc_regs + reg); ++} ++ ++static inline void ecc_write32(struct mt7621_nfc *nfc, u32 reg, u32 val) ++{ ++ return writel(val, nfc->ecc_regs + reg); ++} ++ ++static inline u8 *oob_fdm_ptr(struct nand_chip *nand, int sect) ++{ ++ return nand->oob_poi + sect * NFI_FDM_SIZE; ++} ++ ++static inline u8 *oob_ecc_ptr(struct mt7621_nfc *nfc, int sect) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ ++ return nand->oob_poi + nand->ecc.steps * NFI_FDM_SIZE + ++ sect * (nfc->spare_per_sector - NFI_FDM_SIZE); ++} ++ ++static inline u8 *page_data_ptr(struct nand_chip *nand, const u8 *buf, ++ int sect) ++{ ++ return (u8 *)buf + sect * nand->ecc.size; ++} ++ ++static int mt7621_ecc_wait_idle(struct mt7621_nfc *nfc, u32 reg) ++{ ++ struct device *dev = nfc->dev; ++ u32 val; ++ int ret; ++ ++ ret = readw_poll_timeout_atomic(nfc->ecc_regs + reg, val, ++ val & ECC_IDLE, 10, ++ ECC_ENGINE_TIMEOUT); ++ if (ret) { ++ dev_warn(dev, "ECC engine timed out entering idle mode\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static int mt7621_ecc_decoder_wait_done(struct mt7621_nfc *nfc, u32 sect) ++{ ++ struct device *dev = nfc->dev; ++ u32 val; ++ int ret; ++ ++ ret = readw_poll_timeout_atomic(nfc->ecc_regs + ECC_DECDONE, val, ++ val & (1 << sect), 10, ++ ECC_ENGINE_TIMEOUT); ++ ++ if (ret) { ++ dev_warn(dev, "ECC decoder for sector %d timed out\n", ++ sect); ++ return -ETIMEDOUT; ++ } ++ ++ return 0; ++} ++ ++static void mt7621_ecc_encoder_op(struct mt7621_nfc *nfc, bool enable) ++{ ++ mt7621_ecc_wait_idle(nfc, ECC_ENCIDLE); ++ ecc_write16(nfc, ECC_ENCCON, enable ? ENC_EN : 0); ++} ++ ++static void mt7621_ecc_decoder_op(struct mt7621_nfc *nfc, bool enable) ++{ ++ mt7621_ecc_wait_idle(nfc, ECC_DECIDLE); ++ ecc_write16(nfc, ECC_DECCON, enable ? DEC_EN : 0); ++} ++ ++static int mt7621_ecc_correct_check(struct mt7621_nfc *nfc, u8 *sector_buf, ++ u8 *fdm_buf, u32 sect) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ u32 decnum, num_error_bits, fdm_end_bits; ++ u32 error_locations, error_bit_loc; ++ u32 error_byte_pos, error_bit_pos; ++ int bitflips = 0; ++ u32 i; ++ ++ decnum = ecc_read32(nfc, ECC_DECENUM); ++ num_error_bits = (decnum >> (sect << ERRNUM_S)) & ERRNUM_M; ++ fdm_end_bits = (nand->ecc.size + NFI_FDM_SIZE) << 3; ++ ++ if (!num_error_bits) ++ return 0; ++ ++ if (num_error_bits == ERRNUM_M) ++ return -1; ++ ++ for (i = 0; i < num_error_bits; i++) { ++ error_locations = ecc_read32(nfc, ECC_DECEL(i / 2)); ++ error_bit_loc = (error_locations >> ((i % 2) * DEC_EL_ODD_S)) & ++ DEC_EL_M; ++ error_byte_pos = error_bit_loc >> DEC_EL_BYTE_POS_S; ++ error_bit_pos = error_bit_loc & DEC_EL_BIT_POS_M; ++ ++ if (error_bit_loc < (nand->ecc.size << 3)) { ++ if (sector_buf) { ++ sector_buf[error_byte_pos] ^= ++ (1 << error_bit_pos); ++ } ++ } else if (error_bit_loc < fdm_end_bits) { ++ if (fdm_buf) { ++ fdm_buf[error_byte_pos - nand->ecc.size] ^= ++ (1 << error_bit_pos); ++ } ++ } ++ ++ bitflips++; ++ } ++ ++ return bitflips; ++} ++ ++static int mt7621_nfc_wait_write_completion(struct mt7621_nfc *nfc, ++ struct nand_chip *nand) ++{ ++ struct device *dev = nfc->dev; ++ u16 val; ++ int ret; ++ ++ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_ADDRCNTR, val, ++ ((val & SEC_CNTR_M) >> SEC_CNTR_S) >= nand->ecc.steps, 10, ++ NFI_CORE_TIMEOUT); ++ ++ if (ret) { ++ dev_warn(dev, "NFI core write operation timed out\n"); ++ return -ETIMEDOUT; ++ } ++ ++ return ret; ++} ++ ++static void mt7621_nfc_hw_reset(struct mt7621_nfc *nfc) ++{ ++ u32 val; ++ int ret; ++ ++ /* reset all registers and force the NFI master to terminate */ ++ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST); ++ ++ /* wait for the master to finish the last transaction */ ++ ret = readw_poll_timeout(nfc->nfi_regs + NFI_MASTER_STA, val, ++ !(val & MASTER_STA_MASK), 50, ++ NFI_RESET_TIMEOUT); ++ if (ret) { ++ dev_warn(nfc->dev, "Failed to reset NFI master in %dms\n", ++ NFI_RESET_TIMEOUT); ++ } ++ ++ /* ensure any status register affected by the NFI master is reset */ ++ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST); ++ nfi_write16(nfc, NFI_STRDATA, 0); ++} ++ ++static inline void mt7621_nfc_hw_init(struct mt7621_nfc *nfc) ++{ ++ u32 acccon; ++ ++ /* ++ * CNRNB: nand ready/busy register ++ * ------------------------------- ++ * 7:4: timeout register for polling the NAND busy/ready signal ++ * 0 : poll the status of the busy/ready signal after [7:4]*16 cycles. ++ */ ++ nfi_write16(nfc, NFI_CNRNB, CB2R_TIME_M | STR_CNRNB); ++ ++ mt7621_nfc_hw_reset(nfc); ++ ++ /* Apply default access timing */ ++ acccon = ACCTIMING(ACCCON_POECS_DEF, ACCCON_PRECS_DEF, ACCCON_C2R_DEF, ++ ACCCON_W2R_DEF, ACCCON_WH_DEF, ACCCON_WST_DEF, ++ ACCCON_RLT_DEF); ++ ++ nfi_write32(nfc, NFI_ACCCON, acccon); ++} ++ ++static int mt7621_nfc_send_command(struct mt7621_nfc *nfc, u8 command) ++{ ++ struct device *dev = nfc->dev; ++ u32 val; ++ int ret; ++ ++ nfi_write32(nfc, NFI_CMD, command); ++ ++ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, ++ !(val & STA_CMD), 10, ++ NFI_CORE_TIMEOUT); ++ if (ret) { ++ dev_warn(dev, "NFI core timed out entering command mode\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static int mt7621_nfc_send_address_byte(struct mt7621_nfc *nfc, int addr) ++{ ++ struct device *dev = nfc->dev; ++ u32 val; ++ int ret; ++ ++ nfi_write32(nfc, NFI_COLADDR, addr); ++ nfi_write32(nfc, NFI_ROWADDR, 0); ++ nfi_write16(nfc, NFI_ADDRNOB, 1); ++ ++ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, ++ !(val & STA_ADDR), 10, ++ NFI_CORE_TIMEOUT); ++ if (ret) { ++ dev_warn(dev, "NFI core timed out entering address mode\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static int mt7621_nfc_send_address(struct mt7621_nfc *nfc, const u8 *addr, ++ unsigned int naddrs) ++{ ++ int ret; ++ ++ while (naddrs) { ++ ret = mt7621_nfc_send_address_byte(nfc, *addr); ++ if (ret) ++ return ret; ++ ++ addr++; ++ naddrs--; ++ } ++ ++ return 0; ++} ++ ++static void mt7621_nfc_wait_pio_ready(struct mt7621_nfc *nfc) ++{ ++ struct device *dev = nfc->dev; ++ int ret; ++ u16 val; ++ ++ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_PIO_DIRDY, val, ++ val & PIO_DIRDY, 10, ++ NFI_CORE_TIMEOUT); ++ if (ret < 0) ++ dev_err(dev, "NFI core PIO mode not ready\n"); ++} ++ ++static u32 mt7621_nfc_pio_read(struct mt7621_nfc *nfc, bool br) ++{ ++ u32 reg; ++ ++ /* after each byte read, the NFI_STA reg is reset by the hardware */ ++ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S; ++ if (reg != STA_FSM_CUSTOM_DATA) { ++ reg = nfi_read16(nfc, NFI_CNFG); ++ reg |= CNFG_READ_MODE | CNFG_BYTE_RW; ++ if (!br) ++ reg &= ~CNFG_BYTE_RW; ++ nfi_write16(nfc, NFI_CNFG, reg); ++ ++ /* ++ * set to max sector to allow the HW to continue reading over ++ * unaligned accesses ++ */ ++ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BRD); ++ ++ /* trigger to fetch data */ ++ nfi_write16(nfc, NFI_STRDATA, STR_DATA); ++ } ++ ++ mt7621_nfc_wait_pio_ready(nfc); ++ ++ return nfi_read32(nfc, NFI_DATAR); ++} ++ ++static void mt7621_nfc_read_data(struct mt7621_nfc *nfc, u8 *buf, u32 len) ++{ ++ while (((uintptr_t)buf & 3) && len) { ++ *buf = mt7621_nfc_pio_read(nfc, true); ++ buf++; ++ len--; ++ } ++ ++ while (len >= 4) { ++ *(u32 *)buf = mt7621_nfc_pio_read(nfc, false); ++ buf += 4; ++ len -= 4; ++ } ++ ++ while (len) { ++ *buf = mt7621_nfc_pio_read(nfc, true); ++ buf++; ++ len--; ++ } ++} ++ ++static void mt7621_nfc_read_data_discard(struct mt7621_nfc *nfc, u32 len) ++{ ++ while (len >= 4) { ++ mt7621_nfc_pio_read(nfc, false); ++ len -= 4; ++ } ++ ++ while (len) { ++ mt7621_nfc_pio_read(nfc, true); ++ len--; ++ } ++} ++ ++static void mt7621_nfc_pio_write(struct mt7621_nfc *nfc, u32 val, bool bw) ++{ ++ u32 reg; ++ ++ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S; ++ if (reg != STA_FSM_CUSTOM_DATA) { ++ reg = nfi_read16(nfc, NFI_CNFG); ++ reg &= ~(CNFG_READ_MODE | CNFG_BYTE_RW); ++ if (bw) ++ reg |= CNFG_BYTE_RW; ++ nfi_write16(nfc, NFI_CNFG, reg); ++ ++ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BWR); ++ nfi_write16(nfc, NFI_STRDATA, STR_DATA); ++ } ++ ++ mt7621_nfc_wait_pio_ready(nfc); ++ nfi_write32(nfc, NFI_DATAW, val); ++} ++ ++static void mt7621_nfc_write_data(struct mt7621_nfc *nfc, const u8 *buf, ++ u32 len) ++{ ++ while (((uintptr_t)buf & 3) && len) { ++ mt7621_nfc_pio_write(nfc, *buf, true); ++ buf++; ++ len--; ++ } ++ ++ while (len >= 4) { ++ mt7621_nfc_pio_write(nfc, *(const u32 *)buf, false); ++ buf += 4; ++ len -= 4; ++ } ++ ++ while (len) { ++ mt7621_nfc_pio_write(nfc, *buf, true); ++ buf++; ++ len--; ++ } ++} ++ ++static void mt7621_nfc_write_data_empty(struct mt7621_nfc *nfc, u32 len) ++{ ++ while (len >= 4) { ++ mt7621_nfc_pio_write(nfc, 0xffffffff, false); ++ len -= 4; ++ } ++ ++ while (len) { ++ mt7621_nfc_pio_write(nfc, 0xff, true); ++ len--; ++ } ++} ++ ++static int mt7621_nfc_dev_ready(struct mt7621_nfc *nfc, ++ unsigned int timeout_ms) ++{ ++ u32 val; ++ ++ return readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, ++ !(val & STA_BUSY), 10, ++ timeout_ms * 1000); ++} ++ ++static int mt7621_nfc_exec_instr(struct nand_chip *nand, ++ const struct nand_op_instr *instr) ++{ ++ struct mt7621_nfc *nfc = nand_get_controller_data(nand); ++ ++ switch (instr->type) { ++ case NAND_OP_CMD_INSTR: ++ mt7621_nfc_hw_reset(nfc); ++ nfi_write16(nfc, NFI_CNFG, CNFG_OP_CUSTOM << CNFG_OP_MODE_S); ++ return mt7621_nfc_send_command(nfc, instr->ctx.cmd.opcode); ++ case NAND_OP_ADDR_INSTR: ++ return mt7621_nfc_send_address(nfc, instr->ctx.addr.addrs, ++ instr->ctx.addr.naddrs); ++ case NAND_OP_DATA_IN_INSTR: ++ mt7621_nfc_read_data(nfc, instr->ctx.data.buf.in, ++ instr->ctx.data.len); ++ return 0; ++ case NAND_OP_DATA_OUT_INSTR: ++ mt7621_nfc_write_data(nfc, instr->ctx.data.buf.out, ++ instr->ctx.data.len); ++ return 0; ++ case NAND_OP_WAITRDY_INSTR: ++ return mt7621_nfc_dev_ready(nfc, ++ instr->ctx.waitrdy.timeout_ms); ++ default: ++ WARN_ONCE(1, "unsupported NAND instruction type: %d\n", ++ instr->type); ++ ++ return -EINVAL; ++ } ++} ++ ++static int mt7621_nfc_exec_op(struct nand_chip *nand, ++ const struct nand_operation *op, bool check_only) ++{ ++ struct mt7621_nfc *nfc = nand_get_controller_data(nand); ++ int i, ret; ++ ++ if (check_only) ++ return 0; ++ ++ /* Only CS0 available */ ++ nfi_write16(nfc, NFI_CSEL, 0); ++ ++ for (i = 0; i < op->ninstrs; i++) { ++ ret = mt7621_nfc_exec_instr(nand, &op->instrs[i]); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int mt7621_nfc_setup_data_interface(struct nand_chip *nand, int csline, ++ const struct nand_data_interface *conf) ++{ ++ struct mt7621_nfc *nfc = nand_get_controller_data(nand); ++ const struct nand_sdr_timings *timings; ++ u32 acccon, temp, rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt; ++ ++ if (!nfc->nfi_clk) ++ return -ENOTSUPP; ++ ++ timings = nand_get_sdr_timings(conf); ++ if (IS_ERR(timings)) ++ return -ENOTSUPP; ++ ++ rate = clk_get_rate(nfc->nfi_clk); ++ ++ /* turn clock rate into KHZ */ ++ rate /= 1000; ++ ++ tpoecs = max(timings->tALH_min, timings->tCLH_min) / 1000; ++ tpoecs = DIV_ROUND_UP(tpoecs * rate, 1000000); ++ tpoecs = min_t(u32, tpoecs, ACCCON_POECS_MAX); ++ ++ tprecs = max(timings->tCLS_min, timings->tALS_min) / 1000; ++ tprecs = DIV_ROUND_UP(tprecs * rate, 1000000); ++ tprecs = min_t(u32, tprecs, ACCCON_PRECS_MAX); ++ ++ /* sdr interface has no tCR which means CE# low to RE# low */ ++ tc2r = 0; ++ ++ tw2r = timings->tWHR_min / 1000; ++ tw2r = DIV_ROUND_UP(tw2r * rate, 1000000); ++ tw2r = DIV_ROUND_UP(tw2r - 1, 2); ++ tw2r = min_t(u32, tw2r, ACCCON_W2R_MAX); ++ ++ twh = max(timings->tREH_min, timings->tWH_min) / 1000; ++ twh = DIV_ROUND_UP(twh * rate, 1000000) - 1; ++ twh = min_t(u32, twh, ACCCON_WH_MAX); ++ ++ /* Calculate real WE#/RE# hold time in nanosecond */ ++ temp = (twh + 1) * 1000000 / rate; ++ /* nanosecond to picosecond */ ++ temp *= 1000; ++ ++ /* ++ * WE# low level time should be expaned to meet WE# pulse time ++ * and WE# cycle time at the same time. ++ */ ++ if (temp < timings->tWC_min) ++ twst = timings->tWC_min - temp; ++ else ++ twst = 0; ++ twst = max(timings->tWP_min, twst) / 1000; ++ twst = DIV_ROUND_UP(twst * rate, 1000000) - 1; ++ twst = min_t(u32, twst, ACCCON_WST_MAX); ++ ++ /* ++ * RE# low level time should be expaned to meet RE# pulse time ++ * and RE# cycle time at the same time. ++ */ ++ if (temp < timings->tRC_min) ++ trlt = timings->tRC_min - temp; ++ else ++ trlt = 0; ++ trlt = max(trlt, timings->tRP_min) / 1000; ++ trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1; ++ trlt = min_t(u32, trlt, ACCCON_RLT_MAX); ++ ++ if (csline == NAND_DATA_IFACE_CHECK_ONLY) { ++ if (twst < ACCCON_WST_MIN || trlt < ACCCON_RLT_MIN) ++ return -ENOTSUPP; ++ } ++ ++ acccon = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt); ++ ++ dev_info(nfc->dev, "Using programmed access timing: %08x\n", acccon); ++ ++ nfi_write32(nfc, NFI_ACCCON, acccon); ++ ++ return 0; ++} ++ ++static int mt7621_nfc_calc_ecc_strength(struct mt7621_nfc *nfc, ++ u32 avail_ecc_bytes) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ struct mtd_info *mtd = nand_to_mtd(nand); ++ u32 strength; ++ int i; ++ ++ strength = avail_ecc_bytes * 8 / ECC_PARITY_BITS; ++ ++ /* Find the closest supported ecc strength */ ++ for (i = ARRAY_SIZE(mt7621_ecc_strength) - 1; i >= 0; i--) { ++ if (mt7621_ecc_strength[i] <= strength) ++ break; ++ } ++ ++ if (unlikely(i < 0)) { ++ dev_err(nfc->dev, "OOB size (%u) is not supported\n", ++ mtd->oobsize); ++ return -EINVAL; ++ } ++ ++ nand->ecc.strength = mt7621_ecc_strength[i]; ++ nand->ecc.bytes = ++ DIV_ROUND_UP(nand->ecc.strength * ECC_PARITY_BITS, 8); ++ ++ dev_info(nfc->dev, "ECC strength adjusted to %u bits\n", ++ nand->ecc.strength); ++ ++ return i; ++} ++ ++static int mt7621_nfc_set_spare_per_sector(struct mt7621_nfc *nfc) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ struct mtd_info *mtd = nand_to_mtd(nand); ++ u32 size; ++ int i; ++ ++ size = nand->ecc.bytes + NFI_FDM_SIZE; ++ ++ /* Find the closest supported spare size */ ++ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_spare_size); i++) { ++ if (mt7621_nfi_spare_size[i] >= size) ++ break; ++ } ++ ++ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_spare_size))) { ++ dev_err(nfc->dev, "OOB size (%u) is not supported\n", ++ mtd->oobsize); ++ return -EINVAL; ++ } ++ ++ nfc->spare_per_sector = mt7621_nfi_spare_size[i]; ++ ++ return i; ++} ++ ++static int mt7621_nfc_ecc_init(struct mt7621_nfc *nfc) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ struct mtd_info *mtd = nand_to_mtd(nand); ++ u32 spare_per_sector, encode_block_size, decode_block_size; ++ u32 ecc_enccfg, ecc_deccfg; ++ int ecc_cap; ++ ++ /* Only hardware ECC mode is supported */ ++ if (nand->ecc.mode != NAND_ECC_HW_SYNDROME) { ++ dev_err(nfc->dev, "Only hardware ECC mode is supported\n"); ++ return -EINVAL; ++ } ++ ++ nand->ecc.size = ECC_SECTOR_SIZE; ++ nand->ecc.steps = mtd->writesize / nand->ecc.size; ++ ++ spare_per_sector = mtd->oobsize / nand->ecc.steps; ++ ++ ecc_cap = mt7621_nfc_calc_ecc_strength(nfc, ++ spare_per_sector - NFI_FDM_SIZE); ++ if (ecc_cap < 0) ++ return ecc_cap; ++ ++ /* Sector + FDM */ ++ encode_block_size = (nand->ecc.size + NFI_FDM_SIZE) * 8; ++ ecc_enccfg = ecc_cap | (ENC_MODE_NFI << ENC_MODE_S) | ++ (encode_block_size << ENC_CNFG_MSG_S); ++ ++ /* Sector + FDM + ECC parity bits */ ++ decode_block_size = ((nand->ecc.size + NFI_FDM_SIZE) * 8) + ++ nand->ecc.strength * ECC_PARITY_BITS; ++ ecc_deccfg = ecc_cap | (DEC_MODE_NFI << DEC_MODE_S) | ++ (decode_block_size << DEC_CS_S) | ++ (DEC_CON_EL << DEC_CON_S) | DEC_EMPTY_EN; ++ ++ mt7621_ecc_encoder_op(nfc, false); ++ ecc_write32(nfc, ECC_ENCCNFG, ecc_enccfg); ++ ++ mt7621_ecc_decoder_op(nfc, false); ++ ecc_write32(nfc, ECC_DECCNFG, ecc_deccfg); ++ ++ return 0; ++} ++ ++static int mt7621_nfc_set_page_format(struct mt7621_nfc *nfc) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ struct mtd_info *mtd = nand_to_mtd(nand); ++ int i, spare_size; ++ u32 pagefmt; ++ ++ spare_size = mt7621_nfc_set_spare_per_sector(nfc); ++ if (spare_size < 0) ++ return spare_size; ++ ++ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_page_size); i++) { ++ if (mt7621_nfi_page_size[i] == mtd->writesize) ++ break; ++ } ++ ++ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_page_size))) { ++ dev_err(nfc->dev, "Page size (%u) is not supported\n", ++ mtd->writesize); ++ return -EINVAL; ++ } ++ ++ pagefmt = i | (spare_size << PAGEFMT_SPARE_S) | ++ (NFI_FDM_SIZE << PAGEFMT_FDM_S) | ++ (NFI_FDM_SIZE << PAGEFMT_FDM_ECC_S); ++ ++ nfi_write16(nfc, NFI_PAGEFMT, pagefmt); ++ ++ return 0; ++} ++ ++static int mt7621_nfc_attach_chip(struct nand_chip *nand) ++{ ++ struct mt7621_nfc *nfc = nand_get_controller_data(nand); ++ int ret; ++ ++ if (nand->options & NAND_BUSWIDTH_16) { ++ dev_err(nfc->dev, "16-bit buswidth is not supported"); ++ return -EINVAL; ++ } ++ ++ ret = mt7621_nfc_ecc_init(nfc); ++ if (ret) ++ return ret; ++ ++ return mt7621_nfc_set_page_format(nfc); ++} ++ ++static const struct nand_controller_ops mt7621_nfc_controller_ops = { ++ .attach_chip = mt7621_nfc_attach_chip, ++ .exec_op = mt7621_nfc_exec_op, ++ .setup_data_interface = mt7621_nfc_setup_data_interface, ++}; ++ ++static int mt7621_nfc_ooblayout_free(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oob_region) ++{ ++ struct nand_chip *nand = mtd_to_nand(mtd); ++ ++ if (section >= nand->ecc.steps) ++ return -ERANGE; ++ ++ oob_region->length = NFI_FDM_SIZE - 1; ++ oob_region->offset = section * NFI_FDM_SIZE + 1; ++ ++ return 0; ++} ++ ++static int mt7621_nfc_ooblayout_ecc(struct mtd_info *mtd, int section, ++ struct mtd_oob_region *oob_region) ++{ ++ struct nand_chip *nand = mtd_to_nand(mtd); ++ ++ if (section) ++ return -ERANGE; ++ ++ oob_region->offset = NFI_FDM_SIZE * nand->ecc.steps; ++ oob_region->length = mtd->oobsize - oob_region->offset; ++ ++ return 0; ++} ++ ++static const struct mtd_ooblayout_ops mt7621_nfc_ooblayout_ops = { ++ .free = mt7621_nfc_ooblayout_free, ++ .ecc = mt7621_nfc_ooblayout_ecc, ++}; ++ ++static void mt7621_nfc_write_fdm(struct mt7621_nfc *nfc) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ u32 vall, valm; ++ u8 *oobptr; ++ int i, j; ++ ++ for (i = 0; i < nand->ecc.steps; i++) { ++ vall = 0; ++ valm = 0; ++ oobptr = oob_fdm_ptr(nand, i); ++ ++ for (j = 0; j < 4; j++) ++ vall |= (u32)oobptr[j] << (j * 8); ++ ++ for (j = 0; j < 4; j++) ++ valm |= (u32)oobptr[j + 4] << ((j - 4) * 8); ++ ++ nfi_write32(nfc, NFI_FDML(i), vall); ++ nfi_write32(nfc, NFI_FDMM(i), valm); ++ } ++} ++ ++static void mt7621_nfc_read_sector_fdm(struct mt7621_nfc *nfc, u32 sect) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ u32 vall, valm; ++ u8 *oobptr; ++ int i; ++ ++ vall = nfi_read32(nfc, NFI_FDML(sect)); ++ valm = nfi_read32(nfc, NFI_FDMM(sect)); ++ oobptr = oob_fdm_ptr(nand, sect); ++ ++ for (i = 0; i < 4; i++) ++ oobptr[i] = (vall >> (i * 8)) & 0xff; ++ ++ for (i = 0; i < 4; i++) ++ oobptr[i + 4] = (valm >> (i * 8)) & 0xff; ++} ++ ++static int mt7621_nfc_read_page_hwecc(struct nand_chip *nand, uint8_t *buf, ++ int oob_required, int page) ++{ ++ struct mt7621_nfc *nfc = nand_get_controller_data(nand); ++ struct mtd_info *mtd = nand_to_mtd(nand); ++ int bitflips = 0; ++ int rc, i; ++ ++ nand_read_page_op(nand, page, 0, NULL, 0); ++ ++ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | ++ CNFG_READ_MODE | CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN); ++ ++ mt7621_ecc_decoder_op(nfc, true); ++ ++ nfi_write16(nfc, NFI_CON, ++ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S)); ++ ++ for (i = 0; i < nand->ecc.steps; i++) { ++ if (buf) ++ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i), ++ nand->ecc.size); ++ else ++ mt7621_nfc_read_data_discard(nfc, nand->ecc.size); ++ ++ rc = mt7621_ecc_decoder_wait_done(nfc, i); ++ ++ mt7621_nfc_read_sector_fdm(nfc, i); ++ ++ if (rc < 0) { ++ bitflips = -EIO; ++ continue; ++ } ++ ++ rc = mt7621_ecc_correct_check(nfc, ++ buf ? page_data_ptr(nand, buf, i) : NULL, ++ oob_fdm_ptr(nand, i), i); ++ ++ if (rc < 0) { ++ dev_warn(nfc->dev, ++ "Uncorrectable ECC error at page %d.%d\n", ++ page, i); ++ bitflips = -EBADMSG; ++ mtd->ecc_stats.failed++; ++ } else if (bitflips >= 0) { ++ bitflips += rc; ++ mtd->ecc_stats.corrected += rc; ++ } ++ } ++ ++ mt7621_ecc_decoder_op(nfc, false); ++ ++ nfi_write16(nfc, NFI_CON, 0); ++ ++ return bitflips; ++} ++ ++static int mt7621_nfc_read_page_raw(struct nand_chip *nand, uint8_t *buf, ++ int oob_required, int page) ++{ ++ struct mt7621_nfc *nfc = nand_get_controller_data(nand); ++ int i; ++ ++ nand_read_page_op(nand, page, 0, NULL, 0); ++ ++ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | ++ CNFG_READ_MODE); ++ ++ nfi_write16(nfc, NFI_CON, ++ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S)); ++ ++ for (i = 0; i < nand->ecc.steps; i++) { ++ /* Read data */ ++ if (buf) ++ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i), ++ nand->ecc.size); ++ else ++ mt7621_nfc_read_data_discard(nfc, nand->ecc.size); ++ ++ /* Read FDM */ ++ mt7621_nfc_read_data(nfc, oob_fdm_ptr(nand, i), NFI_FDM_SIZE); ++ ++ /* Read ECC parity data */ ++ mt7621_nfc_read_data(nfc, oob_ecc_ptr(nfc, i), ++ nfc->spare_per_sector - NFI_FDM_SIZE); ++ } ++ ++ nfi_write16(nfc, NFI_CON, 0); ++ ++ return 0; ++} ++ ++static int mt7621_nfc_read_oob_hwecc(struct nand_chip *nand, int page) ++{ ++ return mt7621_nfc_read_page_hwecc(nand, NULL, 1, page); ++} ++ ++static int mt7621_nfc_read_oob_raw(struct nand_chip *nand, int page) ++{ ++ return mt7621_nfc_read_page_raw(nand, NULL, 1, page); ++} ++ ++static int mt7621_nfc_check_empty_page(struct nand_chip *nand, const u8 *buf) ++{ ++ struct mtd_info *mtd = nand_to_mtd(nand); ++ uint32_t i, j; ++ u8 *oobptr; ++ ++ if (buf) { ++ for (i = 0; i < mtd->writesize; i++) ++ if (buf[i] != 0xff) ++ return 0; ++ } ++ ++ for (i = 0; i < nand->ecc.steps; i++) { ++ oobptr = oob_fdm_ptr(nand, i); ++ for (j = 0; j < NFI_FDM_SIZE; j++) ++ if (oobptr[j] != 0xff) ++ return 0; ++ } ++ ++ return 1; ++} ++ ++static int mt7621_nfc_write_page_hwecc(struct nand_chip *nand, ++ const uint8_t *buf, int oob_required, ++ int page) ++{ ++ struct mt7621_nfc *nfc = nand_get_controller_data(nand); ++ struct mtd_info *mtd = nand_to_mtd(nand); ++ ++ if (mt7621_nfc_check_empty_page(nand, buf)) { ++ /* ++ * MT7621 ECC engine always generates parity code for input ++ * pages, even for empty pages. Doing so will write back ECC ++ * parity code to the oob region, which means such pages will ++ * no longer be empty pages. ++ * ++ * To avoid this, stop write operation if current page is an ++ * empty page. ++ */ ++ return 0; ++ } ++ ++ nand_prog_page_begin_op(nand, page, 0, NULL, 0); ++ ++ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | ++ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN); ++ ++ mt7621_ecc_encoder_op(nfc, true); ++ ++ mt7621_nfc_write_fdm(nfc); ++ ++ nfi_write16(nfc, NFI_CON, ++ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S)); ++ ++ if (buf) ++ mt7621_nfc_write_data(nfc, buf, mtd->writesize); ++ else ++ mt7621_nfc_write_data_empty(nfc, mtd->writesize); ++ ++ mt7621_nfc_wait_write_completion(nfc, nand); ++ ++ mt7621_ecc_encoder_op(nfc, false); ++ ++ nfi_write16(nfc, NFI_CON, 0); ++ ++ return nand_prog_page_end_op(nand); ++} ++ ++static int mt7621_nfc_write_page_raw(struct nand_chip *nand, ++ const uint8_t *buf, int oob_required, ++ int page) ++{ ++ struct mt7621_nfc *nfc = nand_get_controller_data(nand); ++ int i; ++ ++ nand_prog_page_begin_op(nand, page, 0, NULL, 0); ++ ++ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S)); ++ ++ nfi_write16(nfc, NFI_CON, ++ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S)); ++ ++ for (i = 0; i < nand->ecc.steps; i++) { ++ /* Write data */ ++ if (buf) ++ mt7621_nfc_write_data(nfc, page_data_ptr(nand, buf, i), ++ nand->ecc.size); ++ else ++ mt7621_nfc_write_data_empty(nfc, nand->ecc.size); ++ ++ /* Write FDM */ ++ mt7621_nfc_write_data(nfc, oob_fdm_ptr(nand, i), ++ NFI_FDM_SIZE); ++ ++ /* Write dummy ECC parity data */ ++ mt7621_nfc_write_data_empty(nfc, nfc->spare_per_sector - ++ NFI_FDM_SIZE); ++ } ++ ++ mt7621_nfc_wait_write_completion(nfc, nand); ++ ++ nfi_write16(nfc, NFI_CON, 0); ++ ++ return nand_prog_page_end_op(nand); ++} ++ ++static int mt7621_nfc_write_oob_hwecc(struct nand_chip *nand, int page) ++{ ++ return mt7621_nfc_write_page_hwecc(nand, NULL, 1, page); ++} ++ ++static int mt7621_nfc_write_oob_raw(struct nand_chip *nand, int page) ++{ ++ return mt7621_nfc_write_page_raw(nand, NULL, 1, page); ++} ++ ++static int mt7621_nfc_init_chip(struct mt7621_nfc *nfc) ++{ ++ struct nand_chip *nand = &nfc->nand; ++ struct mtd_info *mtd; ++ int ret; ++ ++ nand->controller = &nfc->controller; ++ nand_set_controller_data(nand, (void *)nfc); ++ nand_set_flash_node(nand, nfc->dev->of_node); ++ ++ nand->options |= NAND_USE_BOUNCE_BUFFER | NAND_NO_SUBPAGE_WRITE; ++ if (!nfc->nfi_clk) ++ nand->options |= NAND_KEEP_TIMINGS; ++ ++ nand->ecc.mode = NAND_ECC_HW_SYNDROME; ++ nand->ecc.read_page = mt7621_nfc_read_page_hwecc; ++ nand->ecc.read_page_raw = mt7621_nfc_read_page_raw; ++ nand->ecc.write_page = mt7621_nfc_write_page_hwecc; ++ nand->ecc.write_page_raw = mt7621_nfc_write_page_raw; ++ nand->ecc.read_oob = mt7621_nfc_read_oob_hwecc; ++ nand->ecc.read_oob_raw = mt7621_nfc_read_oob_raw; ++ nand->ecc.write_oob = mt7621_nfc_write_oob_hwecc; ++ nand->ecc.write_oob_raw = mt7621_nfc_write_oob_raw; ++ ++ mtd = nand_to_mtd(nand); ++ mtd->owner = THIS_MODULE; ++ mtd->dev.parent = nfc->dev; ++ mtd->name = MT7621_NFC_NAME; ++ mtd_set_ooblayout(mtd, &mt7621_nfc_ooblayout_ops); ++ ++ mt7621_nfc_hw_init(nfc); ++ ++ ret = nand_scan(nand, 1); ++ if (ret) ++ return ret; ++ ++ ret = mtd_device_register(mtd, NULL, 0); ++ if (ret) { ++ dev_err(nfc->dev, "Failed to register MTD: %d\n", ret); ++ nand_release(nand); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int mt7621_nfc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct mt7621_nfc *nfc; ++ struct resource *res; ++ int ret; ++ ++ nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL); ++ if (!nfc) ++ return -ENOMEM; ++ ++ nand_controller_init(&nfc->controller); ++ nfc->controller.ops = &mt7621_nfc_controller_ops; ++ nfc->dev = dev; ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nfi"); ++ nfc->nfi_regs = devm_ioremap_resource(dev, res); ++ if (IS_ERR(nfc->nfi_regs)) { ++ ret = PTR_ERR(nfc->nfi_regs); ++ return ret; ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ecc"); ++ nfc->ecc_regs = devm_ioremap_resource(dev, res); ++ if (IS_ERR(nfc->ecc_regs)) { ++ ret = PTR_ERR(nfc->ecc_regs); ++ return ret; ++ } ++ ++ nfc->nfi_clk = devm_clk_get(dev, "nfi_clk"); ++ if (IS_ERR(nfc->nfi_clk)) { ++ dev_warn(dev, "nfi clk not provided\n"); ++ nfc->nfi_clk = NULL; ++ } else { ++ ret = clk_prepare_enable(nfc->nfi_clk); ++ if (ret) { ++ dev_err(dev, "Failed to enable nfi core clock\n"); ++ return ret; ++ } ++ } ++ ++ platform_set_drvdata(pdev, nfc); ++ ++ ret = mt7621_nfc_init_chip(nfc); ++ if (ret) { ++ dev_err(dev, "Failed to initialize nand chip\n"); ++ goto clk_disable; ++ } ++ ++ return 0; ++ ++clk_disable: ++ clk_disable_unprepare(nfc->nfi_clk); ++ ++ return ret; ++} ++ ++static int mt7621_nfc_remove(struct platform_device *pdev) ++{ ++ struct mt7621_nfc *nfc = platform_get_drvdata(pdev); ++ ++ nand_release(&nfc->nand); ++ clk_disable_unprepare(nfc->nfi_clk); ++ ++ return 0; ++} ++ ++static const struct of_device_id mt7621_nfc_id_table[] = { ++ { .compatible = "mediatek,mt7621-nfc" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, match); ++ ++static struct platform_driver mt7621_nfc_driver = { ++ .probe = mt7621_nfc_probe, ++ .remove = mt7621_nfc_remove, ++ .driver = { ++ .name = MT7621_NFC_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = mt7621_nfc_id_table, ++ }, ++}; ++module_platform_driver(mt7621_nfc_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Weijie Gao "); ++MODULE_DESCRIPTION("MediaTek MT7621 NAND Flash Controller driver"); diff --git a/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch b/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch new file mode 100644 index 0000000000..3d122c10c0 --- /dev/null +++ b/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch @@ -0,0 +1,85 @@ +From 3d5f4da8296b23eb3abf8b13122b0d06a215e79c Mon Sep 17 00:00:00 2001 +From: Weijie Gao +Date: Wed, 1 Apr 2020 02:07:59 +0800 +Subject: [PATCH 2/2] dt-bindings: add documentation for mt7621-nand driver + +This patch adds documentation for MediaTek MT7621 NAND flash controller +driver. + +Signed-off-by: Weijie Gao +--- + .../bindings/mtd/mediatek,mt7621-nfc.yaml | 68 ++++++++++++++++++++++ + 1 file changed, 68 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml +@@ -0,0 +1,68 @@ ++# SPDX-License-Identifier: GPL-2.0 ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/mtd/mediatek,mt7621-nfc.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: MediaTek MT7621 SoC NAND Flash Controller (NFC) DT binding ++ ++maintainers: ++ - Weijie Gao ++ ++description: | ++ This driver uses a single node to describe both NAND Flash controller ++ interface (NFI) and ECC engine for MT7621 SoC. ++ MT7621 supports only one chip select. ++ ++properties: ++ "#address-cells": false ++ "#size-cells": false ++ ++ compatible: ++ enum: ++ - mediatek,mt7621-nfc ++ ++ reg: ++ items: ++ - description: Register base of NFI core ++ - description: Register base of ECC engine ++ ++ reg-names: ++ items: ++ - const: nfi ++ - const: ecc ++ ++ clocks: ++ items: ++ - description: Source clock for NFI core, fixed 125MHz ++ ++ clock-names: ++ items: ++ - const: nfi_clk ++ ++required: ++ - compatible ++ - reg ++ - reg-names ++ - clocks ++ - clock-names ++ ++examples: ++ - | ++ nficlock: nficlock { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ ++ clock-frequency = <125000000>; ++ }; ++ ++ nand@1e003000 { ++ compatible = "mediatek,mt7621-nfc"; ++ ++ reg = <0x1e003000 0x800 ++ 0x1e003800 0x800>; ++ reg-names = "nfi", "ecc"; ++ ++ clocks = <&nficlock>; ++ clock-names = "nfi_clk"; ++ }; diff --git a/target/linux/ramips/patches-5.10/420-spi-nor-add-gd25q512.patch b/target/linux/ramips/patches-5.10/420-spi-nor-add-gd25q512.patch new file mode 100644 index 0000000000..7fcf0c54b6 --- /dev/null +++ b/target/linux/ramips/patches-5.10/420-spi-nor-add-gd25q512.patch @@ -0,0 +1,14 @@ +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -2303,6 +2303,11 @@ static const struct flash_info spi_nor_i + SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + .fixups = &gd25q256_fixups, + }, ++ { ++ "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024, ++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | ++ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4B_OPCODES) ++ }, + + /* Intel/Numonyx -- xxxs33b */ + { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, diff --git a/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch b/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch new file mode 100644 index 0000000000..6583fca60b --- /dev/null +++ b/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch @@ -0,0 +1,34 @@ +From bd0f89de5476ca25e73fae829ba3e1dafae1d90d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= +Date: Fri, 21 Jun 2019 10:04:05 +0200 +Subject: [PATCH] net: ethernet: mediatek: support net-labels + +With this patch, device name can be set within dts file in the same way as dsa +port can. +Add: label = "wan"; to GMAC node. + +Signed-off-by: René van Dorst +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -2922,6 +2922,7 @@ static const struct net_device_ops mtk_n + + static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) + { ++ const char *name = of_get_property(np, "label", NULL); + const __be32 *_id = of_get_property(np, "reg", NULL); + struct phylink *phylink; + int phy_mode, id, err; +@@ -3014,6 +3015,9 @@ static int mtk_add_mac(struct mtk_eth *e + + eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN; + ++ if (name) ++ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ); ++ + return 0; + + free_netdev: diff --git a/target/linux/ramips/patches-5.10/710-at803x.patch b/target/linux/ramips/patches-5.10/710-at803x.patch new file mode 100644 index 0000000000..af0132f8f7 --- /dev/null +++ b/target/linux/ramips/patches-5.10/710-at803x.patch @@ -0,0 +1,156 @@ +From 924453aa9d2324e5611f8e2b71df746d8f0c79f1 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= +Date: Fri, 13 Nov 2020 16:11:32 +0100 +Subject: [PATCH] net: phy: at803x: add support for SFP module in + RGMII-to-x-base mode +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: René van Dorst +--- + drivers/net/phy/at803x.c | 91 ++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 91 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -14,6 +14,8 @@ + #include + #include + #include ++#include ++#include + + #define AT803X_SPECIFIC_STATUS 0x11 + #define AT803X_SS_SPEED_MASK (3 << 14) +@@ -53,9 +55,18 @@ + + #define AT803X_MODE_CFG_MASK 0x0F + #define AT803X_MODE_CFG_SGMII 0x01 ++#define AT803X_MODE_CFG_BX1000_RGMII_50 0x02 ++#define AT803X_MODE_CFG_BX1000_RGMII_75 0x03 ++#define AT803X_MODE_FIBER 0x01 ++#define AT803X_MODE_COPPER 0x00 + + #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ + #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 ++#define PSSR_LINK BIT(10) ++#define PSSR_SYNC_STATUS BIT(8) ++#define PSSR_DUPLEX BIT(13) ++#define PSSR_SPEED_1000 BIT(15) ++#define PSSR_SPEED_100 BIT(14) + + #define AT803X_DEBUG_REG_0 0x00 + #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) +@@ -243,10 +254,72 @@ static int at803x_resume(struct phy_devi + return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); + } + ++static int at803x_mode(struct phy_device *phydev) ++{ ++ int mode; ++ ++ mode = phy_read(phydev, AT803X_REG_CHIP_CONFIG) & AT803X_MODE_CFG_MASK; ++ ++ if (mode == AT803X_MODE_CFG_BX1000_RGMII_50 || ++ mode == AT803X_MODE_CFG_BX1000_RGMII_75) ++ return AT803X_MODE_FIBER; ++ return AT803X_MODE_COPPER; ++} ++ ++static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) ++{ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(at803x_support) = { 0, }; ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; ++ struct phy_device *phydev = upstream; ++ phy_interface_t iface; ++ ++ phylink_set(at803x_support, 1000baseX_Full); ++ /* AT803x only support 1000baseX but SGMII works fine when module runs ++ * at 1Gbit. ++ */ ++ phylink_set(at803x_support, 1000baseT_Full); ++ ++ sfp_parse_support(phydev->sfp_bus, id, support); ++ ++ // Limit to interfaces that both sides support ++ linkmode_and(support, support, at803x_support); ++ ++ if (linkmode_empty(support)) ++ goto unsupported_mode; ++ ++ iface = sfp_select_interface(phydev->sfp_bus, support); ++ ++ if (iface != PHY_INTERFACE_MODE_SGMII && ++ iface != PHY_INTERFACE_MODE_1000BASEX) ++ goto unsupported_mode; ++ ++ dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface)); ++ ++ return 0; ++ ++unsupported_mode: ++ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;" ++ "Only SGMII at 1Gbit/1000BASEX are supported!\n"); ++ return -EINVAL; ++} ++ ++static const struct sfp_upstream_ops at803x_sfp_ops = { ++ .attach = phy_sfp_attach, ++ .detach = phy_sfp_detach, ++ .module_insert = at803x_sfp_insert, ++}; ++ + static int at803x_probe(struct phy_device *phydev) + { + struct device *dev = &phydev->mdio.dev; + struct at803x_priv *priv; ++ int ret; ++ ++ if (at803x_mode(phydev) == AT803X_MODE_FIBER) { ++ ret = phy_sfp_probe(phydev, &at803x_sfp_ops); ++ if (ret < 0) ++ return ret; ++ } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) +@@ -394,6 +467,10 @@ static int at803x_read_status(struct phy + { + int ss, err, old_link = phydev->link; + ++ /* Handle (Fiber) SGMII to RGMII mode */ ++ if (at803x_mode(phydev) == AT803X_MODE_FIBER) ++ return genphy_c37_read_status(phydev); ++ + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) +@@ -448,6 +525,19 @@ static int at803x_read_status(struct phy + return 0; + } + ++static int at803x_config_aneg(struct phy_device *phydev) ++{ ++ /* Handle (Fiber) SerDes to RGMII mode */ ++ if (at803x_mode(phydev) == AT803X_MODE_FIBER) { ++ pr_warn("%s: fiber\n", __func__); ++ return genphy_c37_config_aneg(phydev); ++ } ++ ++ pr_warn("%s: enter\n", __func__); ++ ++ return genphy_config_aneg(phydev); ++} ++ + static struct phy_driver at803x_driver[] = { + { + /* ATHEROS 8035 */ +@@ -491,6 +581,7 @@ static struct phy_driver at803x_driver[] + .suspend = at803x_suspend, + .resume = at803x_resume, + /* PHY_GBIT_FEATURES */ ++ .config_aneg = at803x_config_aneg, + .read_status = at803x_read_status, + .aneg_done = at803x_aneg_done, + .ack_interrupt = &at803x_ack_interrupt, diff --git a/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch new file mode 100644 index 0000000000..a31d1ac3a6 --- /dev/null +++ b/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch @@ -0,0 +1,47 @@ +From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 27 Jul 2014 09:38:50 +0100 +Subject: [PATCH 34/53] NET: multi phy support + +Signed-off-by: John Crispin +--- + drivers/net/phy/phy.c | 9 ++++++--- + include/linux/phy.h | 1 + + 2 files changed, 7 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/phy.c ++++ b/drivers/net/phy/phy.c +@@ -546,7 +546,10 @@ static int phy_check_link_status(struct + phy_link_up(phydev); + } else if (!phydev->link && phydev->state != PHY_NOLINK) { + phydev->state = PHY_NOLINK; +- phy_link_down(phydev, true); ++ if (!phydev->no_auto_carrier_off) ++ phy_link_down(phydev, true); ++ else ++ phy_link_down(phydev, false); + } + + return 0; +@@ -926,7 +929,10 @@ void phy_state_machine(struct work_struc + case PHY_HALTED: + if (phydev->link) { + phydev->link = 0; +- phy_link_down(phydev, true); ++ if (!phydev->no_auto_carrier_off) ++ phy_link_down(phydev, true); ++ else ++ phy_link_down(phydev, false); + } + do_suspend = true; + break; +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -380,6 +380,7 @@ struct phy_device { + unsigned suspended_by_mdio_bus:1; + unsigned sysfs_links:1; + unsigned loopback_enabled:1; ++ unsigned no_auto_carrier_off:1; + + unsigned autoneg:1; + /* The most recently read link state */ diff --git a/target/linux/ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch new file mode 100644 index 0000000000..d4ea379159 --- /dev/null +++ b/target/linux/ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch @@ -0,0 +1,165 @@ +From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 12 Aug 2014 20:49:27 +0200 +Subject: [PATCH 24/53] GPIO: add named gpio exports + +Signed-off-by: John Crispin +--- + drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ + drivers/gpio/gpiolib-sysfs.c | 10 +++++- + include/asm-generic/gpio.h | 6 ++++ + include/linux/gpio/consumer.h | 8 +++++ + 4 files changed, 91 insertions(+), 1 deletion(-) + +--- a/drivers/gpio/gpiolib-of.c ++++ b/drivers/gpio/gpiolib-of.c +@@ -19,6 +19,8 @@ + #include + #include + #include ++#include ++#include + + #include "gpiolib.h" + #include "gpiolib-of.h" +@@ -915,3 +917,68 @@ void of_gpiochip_remove(struct gpio_chip + { + of_node_put(chip->of_node); + } ++ ++static struct of_device_id gpio_export_ids[] = { ++ { .compatible = "gpio-export" }, ++ { /* sentinel */ } ++}; ++ ++static int of_gpio_export_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *cnp; ++ u32 val; ++ int nb = 0; ++ ++ for_each_child_of_node(np, cnp) { ++ const char *name = NULL; ++ int gpio; ++ bool dmc; ++ int max_gpio = 1; ++ int i; ++ ++ of_property_read_string(cnp, "gpio-export,name", &name); ++ ++ if (!name) ++ max_gpio = of_gpio_count(cnp); ++ ++ for (i = 0; i < max_gpio; i++) { ++ unsigned flags = 0; ++ enum of_gpio_flags of_flags; ++ ++ gpio = of_get_gpio_flags(cnp, i, &of_flags); ++ if (!gpio_is_valid(gpio)) ++ return gpio; ++ ++ if (of_flags == OF_GPIO_ACTIVE_LOW) ++ flags |= GPIOF_ACTIVE_LOW; ++ ++ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) ++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; ++ else ++ flags |= GPIOF_IN; ++ ++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) ++ continue; ++ ++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); ++ gpio_export_with_name(gpio, dmc, name); ++ nb++; ++ } ++ } ++ ++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); ++ ++ return 0; ++} ++ ++static struct platform_driver gpio_export_driver = { ++ .driver = { ++ .name = "gpio-export", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(gpio_export_ids), ++ }, ++ .probe = of_gpio_export_probe, ++}; ++ ++module_platform_driver(gpio_export_driver); +--- a/drivers/gpio/gpiolib-sysfs.c ++++ b/drivers/gpio/gpiolib-sysfs.c +@@ -563,7 +563,7 @@ static struct class gpio_class = { + * + * Returns zero on success, else an error. + */ +-int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) + { + struct gpio_chip *chip; + struct gpio_device *gdev; +@@ -625,6 +625,8 @@ int gpiod_export(struct gpio_desc *desc, + offset = gpio_chip_hwgpio(desc); + if (chip->names && chip->names[offset]) + ioname = chip->names[offset]; ++ if (name) ++ ioname = name; + + dev = device_create_with_groups(&gpio_class, &gdev->dev, + MKDEV(0, 0), data, gpio_groups, +@@ -646,6 +648,12 @@ err_unlock: + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; + } ++EXPORT_SYMBOL_GPL(__gpiod_export); ++ ++int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++{ ++ return __gpiod_export(desc, direction_may_change, NULL); ++} + EXPORT_SYMBOL_GPL(gpiod_export); + + static int match_export(struct device *dev, const void *desc) +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g + return gpiod_export(gpio_to_desc(gpio), direction_may_change); + } + ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); ++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) ++{ ++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); ++} ++ + static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -668,6 +668,7 @@ static inline void devm_acpi_dev_remove_ + + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) + ++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); +@@ -675,6 +676,13 @@ void gpiod_unexport(struct gpio_desc *de + + #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ + ++static inline int _gpiod_export(struct gpio_desc *desc, ++ bool direction_may_change, ++ const char *name) ++{ ++ return -ENOSYS; ++} ++ + static inline int gpiod_export(struct gpio_desc *desc, + bool direction_may_change) + { diff --git a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch new file mode 100644 index 0000000000..7d5f98f647 --- /dev/null +++ b/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch @@ -0,0 +1,59 @@ +From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 28 Jul 2013 19:45:30 +0200 +Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink + +Describe gpio-ralink binding. + +Signed-off-by: John Crispin +Cc: linux-mips@linux-mips.org +Cc: devicetree@vger.kernel.org +Cc: linux-gpio@vger.kernel.org +--- + .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++ + 1 file changed, 40 insertions(+) + create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt +@@ -0,0 +1,40 @@ ++Ralink SoC GPIO controller bindings ++ ++Required properties: ++- compatible: ++ - "ralink,rt2880-gpio" for Ralink controllers ++- #gpio-cells : Should be two. ++ - first cell is the pin number ++ - second cell is used to specify optional parameters (unused) ++- gpio-controller : Marks the device node as a GPIO controller ++- reg : Physical base address and length of the controller's registers ++- interrupt-parent: phandle to the INTC device node ++- interrupts : Specify the INTC interrupt number ++- ralink,num-gpios : Specify the number of GPIOs ++- ralink,register-map : The register layout depends on the GPIO bank and actual ++ SoC type. Register offsets need to be in this order. ++ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ] ++ ++Optional properties: ++- ralink,gpio-base : Specify the GPIO chips base number ++ ++Example: ++ ++ gpio0: gpio@600 { ++ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; ++ ++ #gpio-cells = <2>; ++ gpio-controller; ++ ++ reg = <0x600 0x34>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <6>; ++ ++ ralink,gpio-base = <0>; ++ ralink,num-gpios = <24>; ++ ralink,register-map = [ 00 04 08 0c ++ 20 24 28 2c ++ 30 34 ]; ++ ++ }; diff --git a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch new file mode 100644 index 0000000000..eae507bcd7 --- /dev/null +++ b/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch @@ -0,0 +1,416 @@ +From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 4 Aug 2014 20:36:29 +0200 +Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC + +Add gpio driver for Ralink SoC. This driver makes the gpio core on +RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work. + +Signed-off-by: John Crispin +Cc: linux-mips@linux-mips.org +Cc: linux-gpio@vger.kernel.org +--- + arch/mips/include/asm/mach-ralink/gpio.h | 24 ++ + drivers/gpio/Kconfig | 6 + + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++ + 4 files changed, 386 insertions(+) + create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h + create mode 100644 drivers/gpio/gpio-ralink.c + +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/gpio.h +@@ -0,0 +1,24 @@ ++/* ++ * Ralink SoC GPIO API support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++ ++#ifndef __ASM_MACH_RALINK_GPIO_H ++#define __ASM_MACH_RALINK_GPIO_H ++ ++#define ARCH_NR_GPIOS 128 ++#include ++ ++#define gpio_get_value __gpio_get_value ++#define gpio_set_value __gpio_set_value ++#define gpio_cansleep __gpio_cansleep ++#define gpio_to_irq __gpio_to_irq ++ ++#endif /* __ASM_MACH_RALINK_GPIO_H */ +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -471,6 +471,12 @@ config GPIO_SNPS_CREG + where only several fields in register belong to GPIO lines and + each GPIO line owns a field with different length and on/off value. + ++config GPIO_RALINK ++ bool "Ralink GPIO Support" ++ depends on RALINK ++ help ++ Say yes here to support the Ralink SoC GPIO device ++ + config GPIO_SPEAR_SPICS + bool "ST SPEAr13xx SPI Chip Select as GPIO support" + depends on PLAT_SPEAR +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -112,6 +112,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos + obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o + obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o + obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o ++obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o + obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o + obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o + obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o +--- /dev/null ++++ b/drivers/gpio/gpio-ralink.c +@@ -0,0 +1,341 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2009-2011 Gabor Juhos ++ * Copyright (C) 2013 John Crispin ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++enum ralink_gpio_reg { ++ GPIO_REG_INT = 0, ++ GPIO_REG_EDGE, ++ GPIO_REG_RENA, ++ GPIO_REG_FENA, ++ GPIO_REG_DATA, ++ GPIO_REG_DIR, ++ GPIO_REG_POL, ++ GPIO_REG_SET, ++ GPIO_REG_RESET, ++ GPIO_REG_TOGGLE, ++ GPIO_REG_MAX ++}; ++ ++struct ralink_gpio_chip { ++ struct gpio_chip chip; ++ u8 regs[GPIO_REG_MAX]; ++ ++ spinlock_t lock; ++ void __iomem *membase; ++ struct irq_domain *domain; ++ int irq; ++ ++ u32 rising; ++ u32 falling; ++}; ++ ++#define MAP_MAX 4 ++static struct irq_domain *irq_map[MAP_MAX]; ++static int irq_map_count; ++static atomic_t irq_refcount = ATOMIC_INIT(0); ++ ++static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip) ++{ ++ struct ralink_gpio_chip *rg; ++ ++ rg = container_of(chip, struct ralink_gpio_chip, chip); ++ ++ return rg; ++} ++ ++static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val) ++{ ++ iowrite32(val, rg->membase + rg->regs[reg]); ++} ++ ++static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg) ++{ ++ return ioread32(rg->membase + rg->regs[reg]); ++} ++ ++static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ ++ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset)); ++} ++ ++static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ ++ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset)); ++} ++ ++static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ unsigned long flags; ++ u32 t; ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ t = rt_gpio_r32(rg, GPIO_REG_DIR); ++ t &= ~BIT(offset); ++ rt_gpio_w32(rg, GPIO_REG_DIR, t); ++ spin_unlock_irqrestore(&rg->lock, flags); ++ ++ return 0; ++} ++ ++static int ralink_gpio_direction_output(struct gpio_chip *chip, ++ unsigned offset, int value) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ unsigned long flags; ++ u32 t; ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ ralink_gpio_set(chip, offset, value); ++ t = rt_gpio_r32(rg, GPIO_REG_DIR); ++ t |= BIT(offset); ++ rt_gpio_w32(rg, GPIO_REG_DIR, t); ++ spin_unlock_irqrestore(&rg->lock, flags); ++ ++ return 0; ++} ++ ++static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ ++ if (rg->irq < 1) ++ return -1; ++ ++ return irq_create_mapping(rg->domain, pin); ++} ++ ++static void ralink_gpio_irq_handler(struct irq_desc *desc) ++{ ++ int i; ++ ++ for (i = 0; i < irq_map_count; i++) { ++ struct irq_domain *domain = irq_map[i]; ++ struct ralink_gpio_chip *rg; ++ unsigned long pending; ++ int bit; ++ ++ rg = (struct ralink_gpio_chip *) domain->host_data; ++ pending = rt_gpio_r32(rg, GPIO_REG_INT); ++ ++ for_each_set_bit(bit, &pending, rg->chip.ngpio) { ++ u32 map = irq_find_mapping(domain, bit); ++ generic_handle_irq(map); ++ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit)); ++ } ++ } ++} ++ ++static void ralink_gpio_irq_unmask(struct irq_data *d) ++{ ++ struct ralink_gpio_chip *rg; ++ unsigned long flags; ++ u32 rise, fall; ++ ++ rg = (struct ralink_gpio_chip *) d->domain->host_data; ++ rise = rt_gpio_r32(rg, GPIO_REG_RENA); ++ fall = rt_gpio_r32(rg, GPIO_REG_FENA); ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising)); ++ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling)); ++ spin_unlock_irqrestore(&rg->lock, flags); ++} ++ ++static void ralink_gpio_irq_mask(struct irq_data *d) ++{ ++ struct ralink_gpio_chip *rg; ++ unsigned long flags; ++ u32 rise, fall; ++ ++ rg = (struct ralink_gpio_chip *) d->domain->host_data; ++ rise = rt_gpio_r32(rg, GPIO_REG_RENA); ++ fall = rt_gpio_r32(rg, GPIO_REG_FENA); ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq)); ++ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq)); ++ spin_unlock_irqrestore(&rg->lock, flags); ++} ++ ++static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type) ++{ ++ struct ralink_gpio_chip *rg; ++ u32 mask = BIT(d->hwirq); ++ ++ rg = (struct ralink_gpio_chip *) d->domain->host_data; ++ ++ if (type == IRQ_TYPE_PROBE) { ++ if ((rg->rising | rg->falling) & mask) ++ return 0; ++ ++ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; ++ } ++ ++ if (type & IRQ_TYPE_EDGE_RISING) ++ rg->rising |= mask; ++ else ++ rg->rising &= ~mask; ++ ++ if (type & IRQ_TYPE_EDGE_FALLING) ++ rg->falling |= mask; ++ else ++ rg->falling &= ~mask; ++ ++ return 0; ++} ++ ++static struct irq_chip ralink_gpio_irq_chip = { ++ .name = "GPIO", ++ .irq_unmask = ralink_gpio_irq_unmask, ++ .irq_mask = ralink_gpio_irq_mask, ++ .irq_mask_ack = ralink_gpio_irq_mask, ++ .irq_set_type = ralink_gpio_irq_type, ++}; ++ ++static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) ++{ ++ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq); ++ irq_set_handler_data(irq, d); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops irq_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = gpio_map, ++}; ++ ++static void ralink_gpio_irq_init(struct device_node *np, ++ struct ralink_gpio_chip *rg) ++{ ++ if (irq_map_count >= MAP_MAX) ++ return; ++ ++ rg->irq = irq_of_parse_and_map(np, 0); ++ if (!rg->irq) ++ return; ++ ++ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio, ++ &irq_domain_ops, rg); ++ if (!rg->domain) { ++ dev_err(rg->chip.parent, "irq_domain_add_linear failed\n"); ++ return; ++ } ++ ++ irq_map[irq_map_count++] = rg->domain; ++ ++ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0); ++ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0); ++ ++ if (!atomic_read(&irq_refcount)) ++ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler); ++ atomic_inc(&irq_refcount); ++ ++ dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio); ++} ++ ++static int ralink_gpio_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ struct ralink_gpio_chip *rg; ++ const __be32 *ngpio, *gpiobase; ++ ++ if (!res) { ++ dev_err(&pdev->dev, "failed to find resource\n"); ++ return -ENOMEM; ++ } ++ ++ rg = devm_kzalloc(&pdev->dev, ++ sizeof(struct ralink_gpio_chip), GFP_KERNEL); ++ if (!rg) ++ return -ENOMEM; ++ ++ rg->membase = devm_ioremap_resource(&pdev->dev, res); ++ if (!rg->membase) { ++ dev_err(&pdev->dev, "cannot remap I/O memory region\n"); ++ return -ENOMEM; ++ } ++ ++ if (of_property_read_u8_array(np, "ralink,register-map", ++ rg->regs, GPIO_REG_MAX)) { ++ dev_err(&pdev->dev, "failed to read register definition\n"); ++ return -EINVAL; ++ } ++ ++ ngpio = of_get_property(np, "ralink,num-gpios", NULL); ++ if (!ngpio) { ++ dev_err(&pdev->dev, "failed to read number of pins\n"); ++ return -EINVAL; ++ } ++ ++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL); ++ if (gpiobase) ++ rg->chip.base = be32_to_cpu(*gpiobase); ++ else ++ rg->chip.base = -1; ++ ++ spin_lock_init(&rg->lock); ++ ++ rg->chip.parent = &pdev->dev; ++ rg->chip.label = dev_name(&pdev->dev); ++ rg->chip.of_node = np; ++ rg->chip.ngpio = be32_to_cpu(*ngpio); ++ rg->chip.direction_input = ralink_gpio_direction_input; ++ rg->chip.direction_output = ralink_gpio_direction_output; ++ rg->chip.get = ralink_gpio_get; ++ rg->chip.set = ralink_gpio_set; ++ rg->chip.request = gpiochip_generic_request; ++ rg->chip.to_irq = ralink_gpio_to_irq; ++ rg->chip.free = gpiochip_generic_free; ++ ++ /* set polarity to low for all lines */ ++ rt_gpio_w32(rg, GPIO_REG_POL, 0); ++ ++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio); ++ ++ ralink_gpio_irq_init(np, rg); ++ ++ return gpiochip_add(&rg->chip); ++} ++ ++static const struct of_device_id ralink_gpio_match[] = { ++ { .compatible = "ralink,rt2880-gpio" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ralink_gpio_match); ++ ++static struct platform_driver ralink_gpio_driver = { ++ .probe = ralink_gpio_probe, ++ .driver = { ++ .name = "rt2880_gpio", ++ .owner = THIS_MODULE, ++ .of_match_table = ralink_gpio_match, ++ }, ++}; ++ ++static int __init ralink_gpio_init(void) ++{ ++ return platform_driver_register(&ralink_gpio_driver); ++} ++ ++subsys_initcall(ralink_gpio_init); diff --git a/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch b/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch new file mode 100644 index 0000000000..8520ce32ff --- /dev/null +++ b/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch @@ -0,0 +1,44 @@ +From 57fa7f2f4ef6f78ce1d30509c0d111aa3791b524 Mon Sep 17 00:00:00 2001 +From: Daniel Santos +Date: Sun, 4 Nov 2018 20:24:32 -0600 +Subject: gpio-ralink: Add support for GPIO as interrupt-controller + +Signed-off-by: Daniel Santos +--- + Documentation/devicetree/bindings/gpio/gpio-ralink.txt | 6 ++++++ + drivers/gpio/gpio-ralink.c | 2 +- + 2 files changed, 7 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt ++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt +@@ -17,6 +17,9 @@ Required properties: + + Optional properties: + - ralink,gpio-base : Specify the GPIO chips base number ++- interrupt-controller : marks this as an interrupt controller ++- #interrupt-cells : a standard two-cell interrupt flag, see ++ interrupt-controller/interrupts.txt + + Example: + +@@ -28,6 +31,9 @@ Example: + + reg = <0x600 0x34>; + ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ + interrupt-parent = <&intc>; + interrupts = <6>; + +--- a/drivers/gpio/gpio-ralink.c ++++ b/drivers/gpio/gpio-ralink.c +@@ -220,7 +220,7 @@ static int gpio_map(struct irq_domain *d + } + + static const struct irq_domain_ops irq_domain_ops = { +- .xlate = irq_domain_xlate_onecell, ++ .xlate = irq_domain_xlate_twocell, + .map = gpio_map, + }; + diff --git a/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch new file mode 100644 index 0000000000..084b655483 --- /dev/null +++ b/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch @@ -0,0 +1,246 @@ +From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 19 Sep 2013 01:50:59 +0200 +Subject: [PATCH 31/53] uvc: add iPassion iP2970 support + +Signed-off-by: John Crispin +--- + drivers/media/usb/uvc/uvc_driver.c | 12 +++ + drivers/media/usb/uvc/uvc_status.c | 2 + + drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++ + drivers/media/usb/uvc/uvcvideo.h | 5 +- + 4 files changed, 165 insertions(+), 1 deletion(-) + +--- a/drivers/media/usb/uvc/uvc_driver.c ++++ b/drivers/media/usb/uvc/uvc_driver.c +@@ -2908,6 +2908,18 @@ static const struct usb_device_id uvc_id + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) }, ++ /* iPassion iP2970 */ ++ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE ++ | USB_DEVICE_ID_MATCH_INT_INFO, ++ .idVendor = 0x1B3B, ++ .idProduct = 0x2970, ++ .bInterfaceClass = USB_CLASS_VIDEO, ++ .bInterfaceSubClass = 1, ++ .bInterfaceProtocol = 0, ++ .driver_info = UVC_QUIRK_PROBE_MINMAX ++ | UVC_QUIRK_STREAM_NO_FID ++ | UVC_QUIRK_MOTION ++ | UVC_QUIRK_SINGLE_ISO }, + /* Generic USB Video Class */ + { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) }, + { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) }, +--- a/drivers/media/usb/uvc/uvc_status.c ++++ b/drivers/media/usb/uvc/uvc_status.c +@@ -223,6 +223,7 @@ static void uvc_status_complete(struct u + if (uvc_event_control(urb, status, len)) + /* The URB will be resubmitted in work context. */ + return; ++ dev->motion = 1; + break; + } + +@@ -271,6 +272,7 @@ int uvc_status_init(struct uvc_device *d + } + + pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); ++ dev->motion = 0; + + /* For high-speed interrupt endpoints, the bInterval value is used as + * an exponent of two. Some developers forgot about it. +--- a/drivers/media/usb/uvc/uvc_video.c ++++ b/drivers/media/usb/uvc/uvc_video.c +@@ -16,6 +16,11 @@ + #include + #include + #include ++#include ++#include ++#include ++#include ++#include + + #include + +@@ -1156,9 +1161,149 @@ static void uvc_video_decode_data(struct + uvc_urb->async_operations++; + } + ++struct bh_priv { ++ unsigned long seen; ++}; ++ ++struct bh_event { ++ const char *name; ++ struct sk_buff *skb; ++ struct work_struct work; ++}; ++ ++#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args ) ++#define BH_DBG(fmt, args...) do {} while (0) ++#define BH_SKB_SIZE 2048 ++ ++extern u64 uevent_next_seqnum(void); ++static int seen = 0; ++ ++static int bh_event_add_var(struct bh_event *event, int argv, ++ const char *format, ...) ++{ ++ static char buf[128]; ++ char *s; ++ va_list args; ++ int len; ++ ++ if (argv) ++ return 0; ++ ++ va_start(args, format); ++ len = vsnprintf(buf, sizeof(buf), format, args); ++ va_end(args); ++ ++ if (len >= sizeof(buf)) { ++ BH_ERR("buffer size too small\n"); ++ WARN_ON(1); ++ return -ENOMEM; ++ } ++ ++ s = skb_put(event->skb, len + 1); ++ strcpy(s, buf); ++ ++ BH_DBG("added variable '%s'\n", s); ++ ++ return 0; ++} ++ ++static int motion_hotplug_fill_event(struct bh_event *event) ++{ ++ int s = jiffies; ++ int ret; ++ ++ if (!seen) ++ seen = jiffies; ++ ++ ret = bh_event_add_var(event, 0, "HOME=%s", "/"); ++ if (ret) ++ return ret; ++ ++ ret = bh_event_add_var(event, 0, "PATH=%s", ++ "/sbin:/bin:/usr/sbin:/usr/bin"); ++ if (ret) ++ return ret; ++ ++ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb"); ++ if (ret) ++ return ret; ++ ++ ret = bh_event_add_var(event, 0, "ACTION=motion"); ++ if (ret) ++ return ret; ++ ++ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen); ++ if (ret) ++ return ret; ++ seen = s; ++ ++ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum()); ++ ++ return ret; ++} ++ ++static void motion_hotplug_work(struct work_struct *work) ++{ ++ struct bh_event *event = container_of(work, struct bh_event, work); ++ int ret = 0; ++ ++ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL); ++ if (!event->skb) ++ goto out_free_event; ++ ++ ret = bh_event_add_var(event, 0, "%s@", "add"); ++ if (ret) ++ goto out_free_skb; ++ ++ ret = motion_hotplug_fill_event(event); ++ if (ret) ++ goto out_free_skb; ++ ++ NETLINK_CB(event->skb).dst_group = 1; ++ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL); ++ ++out_free_skb: ++ if (ret) { ++ BH_ERR("work error %d\n", ret); ++ kfree_skb(event->skb); ++ } ++out_free_event: ++ kfree(event); ++} ++ ++static int motion_hotplug_create_event(void) ++{ ++ struct bh_event *event; ++ ++ event = kzalloc(sizeof(*event), GFP_KERNEL); ++ if (!event) ++ return -ENOMEM; ++ ++ event->name = "motion"; ++ ++ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work); ++ schedule_work(&event->work); ++ ++ return 0; ++} ++ ++#define MOTION_FLAG_OFFSET 4 + static void uvc_video_decode_end(struct uvc_streaming *stream, + struct uvc_buffer *buf, const u8 *data, int len) + { ++ if ((stream->dev->quirks & UVC_QUIRK_MOTION) && ++ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) { ++ u8 *mem; ++ buf->state = UVC_BUF_STATE_READY; ++ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET); ++ if ( stream->dev->motion ) { ++ stream->dev->motion = 0; ++ motion_hotplug_create_event(); ++ } else { ++ *mem &= 0x7f; ++ } ++ } ++ + /* Mark the buffer as done if the EOF marker is set. */ + if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); +@@ -1715,6 +1860,8 @@ static int uvc_init_video_isoc(struct uv + if (npackets == 0) + return -ENOMEM; + ++ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO) ++ npackets = 1; + size = npackets * psize; + + for_each_uvc_urb(uvc_urb, stream) { +--- a/drivers/media/usb/uvc/uvcvideo.h ++++ b/drivers/media/usb/uvc/uvcvideo.h +@@ -199,7 +199,9 @@ + #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400 + #define UVC_QUIRK_FORCE_Y8 0x00000800 + #define UVC_QUIRK_FORCE_BPP 0x00001000 +- ++#define UVC_QUIRK_MOTION 0x00001000 ++#define UVC_QUIRK_SINGLE_ISO 0x00002000 ++ + /* Format flags */ + #define UVC_FMT_FLAG_COMPRESSED 0x00000001 + #define UVC_FMT_FLAG_STREAM 0x00000002 +@@ -666,6 +668,7 @@ struct uvc_device { + u8 *status; + struct input_dev *input; + char input_phys[64]; ++ int motion; + + struct uvc_ctrl_work { + struct work_struct work; diff --git a/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch new file mode 100644 index 0000000000..e2643e3f25 --- /dev/null +++ b/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch @@ -0,0 +1,44 @@ +From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 9 Aug 2013 20:12:59 +0200 +Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880 + +Describe the SPI master found on the MIPS based Ralink RT2880 SoC. + +Signed-off-by: John Crispin +--- + .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++ + 1 file changed, 28 insertions(+) + create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt +@@ -0,0 +1,28 @@ ++Ralink SoC RT2880 SPI master controller. ++ ++This SPI controller is found on most wireless SoCs made by ralink. ++ ++Required properties: ++- compatible : "ralink,rt2880-spi" ++- reg : The register base for the controller. ++- #address-cells : <1>, as required by generic SPI binding. ++- #size-cells : <0>, also as required by generic SPI binding. ++ ++Child nodes as per the generic SPI binding. ++ ++Example: ++ ++ spi@b00 { ++ compatible = "ralink,rt2880-spi"; ++ reg = <0xb00 0x100>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ m25p80@0 { ++ compatible = "m25p80"; ++ reg = <0>; ++ spi-max-frequency = <10000000>; ++ }; ++ }; ++ diff --git a/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch new file mode 100644 index 0000000000..652371617a --- /dev/null +++ b/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch @@ -0,0 +1,574 @@ +From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 27 Jul 2014 11:15:12 +0100 +Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver + +Add the driver needed to make SPI work on Ralink SoC. + +Signed-off-by: Gabor Juhos +Acked-by: John Crispin +--- + drivers/spi/Kconfig | 6 + + drivers/spi/Makefile | 1 + + drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 537 insertions(+) + create mode 100644 drivers/spi/spi-rt2880.c + +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -605,6 +605,12 @@ config SPI_QCOM_GENI + This driver can also be built as a module. If so, the module + will be called spi-geni-qcom. + ++config SPI_RT2880 ++ tristate "Ralink RT288x SPI Controller" ++ depends on RALINK ++ help ++ This selects a driver for the Ralink RT288x/RT305x SPI Controller. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C24XX +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -87,6 +87,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o + obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o + obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o + obj-$(CONFIG_SPI_RSPI) += spi-rspi.o ++obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o + obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o + spi-s3c24xx-hw-y := spi-s3c24xx.o + spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o +--- /dev/null ++++ b/drivers/spi/spi-rt2880.c +@@ -0,0 +1,530 @@ ++/* ++ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver ++ * ++ * Copyright (C) 2011 Sergiy ++ * Copyright (C) 2011-2013 Gabor Juhos ++ * ++ * Some parts are based on spi-orion.c: ++ * Author: Shadi Ammouri ++ * Copyright (C) 2007-2008 Marvell Ltd. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "spi-rt2880" ++ ++#define RAMIPS_SPI_STAT 0x00 ++#define RAMIPS_SPI_CFG 0x10 ++#define RAMIPS_SPI_CTL 0x14 ++#define RAMIPS_SPI_DATA 0x20 ++#define RAMIPS_SPI_ADDR 0x24 ++#define RAMIPS_SPI_BS 0x28 ++#define RAMIPS_SPI_USER 0x2C ++#define RAMIPS_SPI_TXFIFO 0x30 ++#define RAMIPS_SPI_RXFIFO 0x34 ++#define RAMIPS_SPI_FIFO_STAT 0x38 ++#define RAMIPS_SPI_MODE 0x3C ++#define RAMIPS_SPI_DEV_OFFSET 0x40 ++#define RAMIPS_SPI_DMA 0x80 ++#define RAMIPS_SPI_DMASTAT 0x84 ++#define RAMIPS_SPI_ARBITER 0xF0 ++ ++/* SPISTAT register bit field */ ++#define SPISTAT_BUSY BIT(0) ++ ++/* SPICFG register bit field */ ++#define SPICFG_ADDRMODE BIT(12) ++#define SPICFG_RXENVDIS BIT(11) ++#define SPICFG_RXCAP BIT(10) ++#define SPICFG_SPIENMODE BIT(9) ++#define SPICFG_MSBFIRST BIT(8) ++#define SPICFG_SPICLKPOL BIT(6) ++#define SPICFG_RXCLKEDGE_FALLING BIT(5) ++#define SPICFG_TXCLKEDGE_FALLING BIT(4) ++#define SPICFG_HIZSPI BIT(3) ++#define SPICFG_SPICLK_PRESCALE_MASK 0x7 ++#define SPICFG_SPICLK_DIV2 0 ++#define SPICFG_SPICLK_DIV4 1 ++#define SPICFG_SPICLK_DIV8 2 ++#define SPICFG_SPICLK_DIV16 3 ++#define SPICFG_SPICLK_DIV32 4 ++#define SPICFG_SPICLK_DIV64 5 ++#define SPICFG_SPICLK_DIV128 6 ++#define SPICFG_SPICLK_DISABLE 7 ++ ++/* SPICTL register bit field */ ++#define SPICTL_START BIT(4) ++#define SPICTL_HIZSDO BIT(3) ++#define SPICTL_STARTWR BIT(2) ++#define SPICTL_STARTRD BIT(1) ++#define SPICTL_SPIENA BIT(0) ++ ++/* SPIUSER register bit field */ ++#define SPIUSER_USERMODE BIT(21) ++#define SPIUSER_INSTR_PHASE BIT(20) ++#define SPIUSER_ADDR_PHASE_MASK 0x7 ++#define SPIUSER_ADDR_PHASE_OFFSET 17 ++#define SPIUSER_MODE_PHASE BIT(16) ++#define SPIUSER_DUMMY_PHASE_MASK 0x3 ++#define SPIUSER_DUMMY_PHASE_OFFSET 14 ++#define SPIUSER_DATA_PHASE_MASK 0x3 ++#define SPIUSER_DATA_PHASE_OFFSET 12 ++#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET) ++#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET) ++#define SPIUSER_ADDR_TYPE_OFFSET 9 ++#define SPIUSER_MODE_TYPE_OFFSET 6 ++#define SPIUSER_DUMMY_TYPE_OFFSET 3 ++#define SPIUSER_DATA_TYPE_OFFSET 0 ++#define SPIUSER_TRANSFER_MASK 0x7 ++#define SPIUSER_TRANSFER_SINGLE BIT(0) ++#define SPIUSER_TRANSFER_DUAL BIT(1) ++#define SPIUSER_TRANSFER_QUAD BIT(2) ++ ++#define SPIUSER_TRANSFER_TYPE(type) ( \ ++ (type << SPIUSER_ADDR_TYPE_OFFSET) | \ ++ (type << SPIUSER_MODE_TYPE_OFFSET) | \ ++ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \ ++ (type << SPIUSER_DATA_TYPE_OFFSET) \ ++) ++ ++/* SPIFIFOSTAT register bit field */ ++#define SPIFIFOSTAT_TXEMPTY BIT(19) ++#define SPIFIFOSTAT_RXEMPTY BIT(18) ++#define SPIFIFOSTAT_TXFULL BIT(17) ++#define SPIFIFOSTAT_RXFULL BIT(16) ++#define SPIFIFOSTAT_FIFO_MASK 0xff ++#define SPIFIFOSTAT_TX_OFFSET 8 ++#define SPIFIFOSTAT_RX_OFFSET 0 ++ ++#define SPI_FIFO_DEPTH 16 ++ ++/* SPIMODE register bit field */ ++#define SPIMODE_MODE_OFFSET 24 ++#define SPIMODE_DUMMY_OFFSET 0 ++ ++/* SPIARB register bit field */ ++#define SPICTL_ARB_EN BIT(31) ++#define SPICTL_CSCTL1 BIT(16) ++#define SPI1_POR BIT(1) ++#define SPI0_POR BIT(0) ++ ++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \ ++ SPI_CS_HIGH) ++ ++static atomic_t hw_reset_count = ATOMIC_INIT(0); ++ ++struct rt2880_spi { ++ struct spi_master *master; ++ void __iomem *base; ++ u32 speed; ++ u16 wait_loops; ++ u16 mode; ++ struct clk *clk; ++}; ++ ++static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi) ++{ ++ return spi_master_get_devdata(spi->master); ++} ++ ++static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg) ++{ ++ return ioread32(rs->base + reg); ++} ++ ++static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg, ++ const u32 val) ++{ ++ iowrite32(val, rs->base + reg); ++} ++ ++static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask) ++{ ++ void __iomem *addr = rs->base + reg; ++ ++ iowrite32((ioread32(addr) | mask), addr); ++} ++ ++static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask) ++{ ++ void __iomem *addr = rs->base + reg; ++ ++ iowrite32((ioread32(addr) & ~mask), addr); ++} ++ ++static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed) ++{ ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ u32 rate; ++ u32 prescale; ++ ++ /* ++ * the supported rates are: 2, 4, 8, ... 128 ++ * round up as we look for equal or less speed ++ */ ++ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed); ++ rate = roundup_pow_of_two(rate); ++ ++ /* Convert the rate to SPI clock divisor value. */ ++ prescale = ilog2(rate / 2); ++ ++ /* some tolerance. double and add 100 */ ++ rs->wait_loops = (8 * HZ * loops_per_jiffy) / ++ (clk_get_rate(rs->clk) / rate); ++ rs->wait_loops = (rs->wait_loops << 1) + 100; ++ rs->speed = speed; ++ ++ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n", ++ clk_get_rate(rs->clk) / rate, speed, rate, prescale, ++ rs->wait_loops); ++ ++ return prescale; ++} ++ ++static u32 get_arbiter_offset(struct spi_master *master) ++{ ++ u32 offset; ++ ++ offset = RAMIPS_SPI_ARBITER; ++ if (master->bus_num == 1) ++ offset -= RAMIPS_SPI_DEV_OFFSET; ++ ++ return offset; ++} ++ ++static void rt2880_spi_set_cs(struct spi_device *spi, bool enable) ++{ ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ ++ if (enable) ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++ else ++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++} ++ ++static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len) ++{ ++ int loop = rs->wait_loops * len; ++ ++ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop) ++ cpu_relax(); ++ ++ if (loop) ++ return 0; ++ ++ return -ETIMEDOUT; ++} ++ ++static void rt2880_dump_reg(struct spi_master *master) ++{ ++ struct rt2880_spi *rs = spi_master_get_devdata(master); ++ ++ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \ ++ "data: %08x, arb: %08x\n", ++ rt2880_spi_read(rs, RAMIPS_SPI_STAT), ++ rt2880_spi_read(rs, RAMIPS_SPI_CFG), ++ rt2880_spi_read(rs, RAMIPS_SPI_CTL), ++ rt2880_spi_read(rs, RAMIPS_SPI_DATA), ++ rt2880_spi_read(rs, get_arbiter_offset(master))); ++} ++ ++static int rt2880_spi_transfer_one(struct spi_master *master, ++ struct spi_device *spi, struct spi_transfer *xfer) ++{ ++ struct rt2880_spi *rs = spi_master_get_devdata(master); ++ unsigned len; ++ const u8 *tx = xfer->tx_buf; ++ u8 *rx = xfer->rx_buf; ++ int err = 0; ++ ++ /* change clock speed */ ++ if (unlikely(rs->speed != xfer->speed_hz)) { ++ u32 reg; ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); ++ reg &= ~SPICFG_SPICLK_PRESCALE_MASK; ++ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz); ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); ++ } ++ ++ if (tx) { ++ len = xfer->len; ++ while (len-- > 0) { ++ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR); ++ err = rt2880_spi_wait_ready(rs, 1); ++ if (err) { ++ dev_err(&spi->dev, "TX failed, err=%d\n", err); ++ goto out; ++ } ++ } ++ } ++ ++ if (rx) { ++ len = xfer->len; ++ while (len-- > 0) { ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD); ++ err = rt2880_spi_wait_ready(rs, 1); ++ if (err) { ++ dev_err(&spi->dev, "RX failed, err=%d\n", err); ++ goto out; ++ } ++ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA); ++ } ++ } ++ ++out: ++ return err; ++} ++ ++/* copy from spi.c */ ++static void spi_set_cs(struct spi_device *spi, bool enable) ++{ ++ if (spi->mode & SPI_CS_HIGH) ++ enable = !enable; ++ ++ if (spi->cs_gpio >= 0) ++ gpio_set_value(spi->cs_gpio, !enable); ++ else if (spi->master->set_cs) ++ spi->master->set_cs(spi, !enable); ++} ++ ++static int rt2880_spi_setup(struct spi_device *spi) ++{ ++ struct spi_master *master = spi->master; ++ struct rt2880_spi *rs = spi_master_get_devdata(master); ++ u32 reg, old_reg, arbit_off; ++ ++ if ((spi->max_speed_hz > master->max_speed_hz) || ++ (spi->max_speed_hz < master->min_speed_hz)) { ++ dev_err(&spi->dev, "invalide requested speed %d Hz\n", ++ spi->max_speed_hz); ++ return -EINVAL; ++ } ++ ++ if (!(master->bits_per_word_mask & ++ BIT(spi->bits_per_word - 1))) { ++ dev_err(&spi->dev, "invalide bits_per_word %d\n", ++ spi->bits_per_word); ++ return -EINVAL; ++ } ++ ++ /* the hardware seems can't work on mode0 force it to mode3 */ ++ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) { ++ dev_warn(&spi->dev, "force spi mode3\n"); ++ spi->mode |= SPI_MODE_3; ++ } ++ ++ /* chip polarity */ ++ arbit_off = get_arbiter_offset(master); ++ reg = old_reg = rt2880_spi_read(rs, arbit_off); ++ if (spi->mode & SPI_CS_HIGH) { ++ switch (master->bus_num) { ++ case 1: ++ reg |= SPI1_POR; ++ break; ++ default: ++ reg |= SPI0_POR; ++ break; ++ } ++ } else { ++ switch (master->bus_num) { ++ case 1: ++ reg &= ~SPI1_POR; ++ break; ++ default: ++ reg &= ~SPI0_POR; ++ break; ++ } ++ } ++ ++ /* enable spi1 */ ++ if (master->bus_num == 1) ++ reg |= SPICTL_ARB_EN; ++ ++ if (reg != old_reg) ++ rt2880_spi_write(rs, arbit_off, reg); ++ ++ /* deselected the spi device */ ++ spi_set_cs(spi, false); ++ ++ rt2880_dump_reg(master); ++ ++ return 0; ++} ++ ++static int rt2880_spi_prepare_message(struct spi_master *master, ++ struct spi_message *msg) ++{ ++ struct rt2880_spi *rs = spi_master_get_devdata(master); ++ struct spi_device *spi = msg->spi; ++ u32 reg; ++ ++ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz)) ++ return 0; ++ ++#if 0 ++ /* set spido to tri-state */ ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO); ++#endif ++ ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); ++ ++ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL | ++ SPICFG_RXCLKEDGE_FALLING | ++ SPICFG_TXCLKEDGE_FALLING | ++ SPICFG_SPICLK_PRESCALE_MASK); ++ ++ /* MSB */ ++ if (!(spi->mode & SPI_LSB_FIRST)) ++ reg |= SPICFG_MSBFIRST; ++ ++ /* spi mode */ ++ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { ++ case SPI_MODE_0: ++ reg |= SPICFG_TXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_1: ++ reg |= SPICFG_RXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_2: ++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_3: ++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING; ++ break; ++ } ++ rs->mode = spi->mode; ++ ++#if 0 ++ /* set spiclk and spiena to tri-state */ ++ reg |= SPICFG_HIZSPI; ++#endif ++ ++ /* clock divide */ ++ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz); ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); ++ ++ return 0; ++} ++ ++static int rt2880_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct rt2880_spi *rs; ++ void __iomem *base; ++ struct resource *r; ++ struct clk *clk; ++ int ret; ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, r); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ clk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(clk)) { ++ dev_err(&pdev->dev, "unable to get SYS clock\n"); ++ return PTR_ERR(clk); ++ } ++ ++ ret = clk_prepare_enable(clk); ++ if (ret) ++ goto err_clk; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(*rs)); ++ if (master == NULL) { ++ dev_dbg(&pdev->dev, "master allocation failed\n"); ++ ret = -ENOMEM; ++ goto err_clk; ++ } ++ ++ master->dev.of_node = pdev->dev.of_node; ++ master->mode_bits = RT2880_SPI_MODE_BITS; ++ master->bits_per_word_mask = SPI_BPW_MASK(8); ++ master->min_speed_hz = clk_get_rate(clk) / 128; ++ master->max_speed_hz = clk_get_rate(clk) / 2; ++ master->flags = SPI_MASTER_HALF_DUPLEX; ++ master->setup = rt2880_spi_setup; ++ master->prepare_message = rt2880_spi_prepare_message; ++ master->set_cs = rt2880_spi_set_cs; ++ master->transfer_one = rt2880_spi_transfer_one, ++ ++ dev_set_drvdata(&pdev->dev, master); ++ ++ rs = spi_master_get_devdata(master); ++ rs->master = master; ++ rs->base = base; ++ rs->clk = clk; ++ ++ if (atomic_inc_return(&hw_reset_count) == 1) ++ device_reset(&pdev->dev); ++ ++ ret = devm_spi_register_master(&pdev->dev, master); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "devm_spi_register_master error.\n"); ++ goto err_master; ++ } ++ ++ return ret; ++ ++err_master: ++ spi_master_put(master); ++ kfree(master); ++err_clk: ++ clk_disable_unprepare(clk); ++ ++ return ret; ++} ++ ++static int rt2880_spi_remove(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct rt2880_spi *rs; ++ ++ master = dev_get_drvdata(&pdev->dev); ++ rs = spi_master_get_devdata(master); ++ ++ clk_disable_unprepare(rs->clk); ++ atomic_dec(&hw_reset_count); ++ ++ return 0; ++} ++ ++MODULE_ALIAS("platform:" DRIVER_NAME); ++ ++static const struct of_device_id rt2880_spi_match[] = { ++ { .compatible = "ralink,rt2880-spi" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt2880_spi_match); ++ ++static struct platform_driver rt2880_spi_driver = { ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = rt2880_spi_match, ++ }, ++ .probe = rt2880_spi_probe, ++ .remove = rt2880_spi_remove, ++}; ++ ++module_platform_driver(rt2880_spi_driver); ++ ++MODULE_DESCRIPTION("Ralink SPI driver"); ++MODULE_AUTHOR("Sergiy "); ++MODULE_AUTHOR("Gabor Juhos "); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch new file mode 100644 index 0000000000..e3bb7f2488 --- /dev/null +++ b/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch @@ -0,0 +1,507 @@ +From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 27 Jul 2014 09:52:56 +0100 +Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver + +Signed-off-by: John Crispin +--- + .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++ + drivers/i2c/busses/Kconfig | 4 + + drivers/i2c/busses/Makefile | 1 + + drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++ + 4 files changed, 359 insertions(+) + create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt + create mode 100644 drivers/i2c/busses/i2c-ralink.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt +@@ -0,0 +1,27 @@ ++I2C for Ralink platforms ++ ++Required properties : ++- compatible : Must be "link,rt3052-i2c" ++- reg: physical base address of the controller and length of memory mapped ++ region. ++- #address-cells = <1>; ++- #size-cells = <0>; ++ ++Optional properties: ++- Child nodes conforming to i2c bus binding ++ ++Example : ++ ++palmbus@10000000 { ++ i2c@900 { ++ compatible = "link,rt3052-i2c"; ++ reg = <0x900 0x100>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hwmon@4b { ++ compatible = "national,lm92"; ++ reg = <0x4b>; ++ }; ++ }; ++}; +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -922,6 +922,11 @@ config I2C_RK3X + This driver can also be built as a module. If so, the module will + be called i2c-rk3x. + ++config I2C_RALINK ++ tristate "Ralink I2C Controller" ++ depends on RALINK && !SOC_MT7621 ++ select OF_I2C ++ + config HAVE_S3C2410_I2C + bool + help +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -91,6 +91,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o + obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o + obj-$(CONFIG_I2C_PXA) += i2c-pxa.o + obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o ++obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o + obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-geni.o + obj-$(CONFIG_I2C_QUP) += i2c-qup.o + obj-$(CONFIG_I2C_RIIC) += i2c-riic.o +--- /dev/null ++++ b/drivers/i2c/busses/i2c-ralink.c +@@ -0,0 +1,435 @@ ++/* ++ * drivers/i2c/busses/i2c-ralink.c ++ * ++ * Copyright (C) 2013 Steven Liu ++ * Copyright (C) 2016 Michael Lee ++ * ++ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus. ++ * (C) 2014 Sittisak ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define REG_CONFIG_REG 0x00 ++#define REG_CLKDIV_REG 0x04 ++#define REG_DEVADDR_REG 0x08 ++#define REG_ADDR_REG 0x0C ++#define REG_DATAOUT_REG 0x10 ++#define REG_DATAIN_REG 0x14 ++#define REG_STATUS_REG 0x18 ++#define REG_STARTXFR_REG 0x1C ++#define REG_BYTECNT_REG 0x20 ++ ++/* REG_CONFIG_REG */ ++#define I2C_ADDRLEN_OFFSET 5 ++#define I2C_DEVADLEN_OFFSET 2 ++#define I2C_ADDRLEN_MASK 0x3 ++#define I2C_ADDR_DIS BIT(1) ++#define I2C_DEVADDR_DIS BIT(0) ++#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET) ++#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET) ++#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7) ++ ++/* REG_CLKDIV_REG */ ++#define I2C_CLKDIV_MASK 0xffff ++ ++/* REG_DEVADDR_REG */ ++#define I2C_DEVADDR_MASK 0x7f ++ ++/* REG_ADDR_REG */ ++#define I2C_ADDR_MASK 0xff ++ ++/* REG_STATUS_REG */ ++#define I2C_STARTERR BIT(4) ++#define I2C_ACKERR BIT(3) ++#define I2C_DATARDY BIT(2) ++#define I2C_SDOEMPTY BIT(1) ++#define I2C_BUSY BIT(0) ++ ++/* REG_STARTXFR_REG */ ++#define NOSTOP_CMD BIT(2) ++#define NODATA_CMD BIT(1) ++#define READ_CMD BIT(0) ++ ++/* REG_BYTECNT_REG */ ++#define BYTECNT_MAX 64 ++#define SET_BYTECNT(x) (x - 1) ++ ++/* timeout waiting for I2C devices to respond (clock streching) */ ++#define TIMEOUT_MS 1000 ++#define DELAY_INTERVAL_US 100 ++ ++struct rt_i2c { ++ void __iomem *base; ++ struct clk *clk; ++ struct device *dev; ++ struct i2c_adapter adap; ++ u32 cur_clk; ++ u32 clk_div; ++ u32 flags; ++}; ++ ++static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg) ++{ ++ iowrite32(val, i2c->base + reg); ++} ++ ++static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg) ++{ ++ return ioread32(i2c->base + reg); ++} ++ ++static int poll_down_timeout(void __iomem *addr, u32 mask) ++{ ++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); ++ ++ do { ++ if (!(readl_relaxed(addr) & mask)) ++ return 0; ++ ++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); ++ } while (time_before(jiffies, timeout)); ++ ++ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0; ++} ++ ++static int rt_i2c_wait_idle(struct rt_i2c *i2c) ++{ ++ int ret; ++ ++ ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY); ++ if (ret < 0) ++ dev_dbg(i2c->dev, "idle err(%d)\n", ret); ++ ++ return ret; ++} ++ ++static int poll_up_timeout(void __iomem *addr, u32 mask) ++{ ++ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); ++ u32 status; ++ ++ do { ++ status = readl_relaxed(addr); ++ ++ /* check error status */ ++ if (status & I2C_STARTERR) ++ return -EAGAIN; ++ else if (status & I2C_ACKERR) ++ return -ENXIO; ++ else if (status & mask) ++ return 0; ++ ++ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); ++ } while (time_before(jiffies, timeout)); ++ ++ return -ETIMEDOUT; ++} ++ ++static int rt_i2c_wait_rx_done(struct rt_i2c *i2c) ++{ ++ int ret; ++ ++ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY); ++ if (ret < 0) ++ dev_dbg(i2c->dev, "rx err(%d)\n", ret); ++ ++ return ret; ++} ++ ++static int rt_i2c_wait_tx_done(struct rt_i2c *i2c) ++{ ++ int ret; ++ ++ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY); ++ if (ret < 0) ++ dev_dbg(i2c->dev, "tx err(%d)\n", ret); ++ ++ return ret; ++} ++ ++static void rt_i2c_reset(struct rt_i2c *i2c) ++{ ++ device_reset(i2c->adap.dev.parent); ++ barrier(); ++ rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG); ++} ++ ++static void rt_i2c_dump_reg(struct rt_i2c *i2c) ++{ ++ dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \ ++ "addr %08x, dataout %08x, datain %08x, " \ ++ "status %08x, startxfr %08x, bytecnt %08x\n", ++ rt_i2c_r32(i2c, REG_CONFIG_REG), ++ rt_i2c_r32(i2c, REG_CLKDIV_REG), ++ rt_i2c_r32(i2c, REG_DEVADDR_REG), ++ rt_i2c_r32(i2c, REG_ADDR_REG), ++ rt_i2c_r32(i2c, REG_DATAOUT_REG), ++ rt_i2c_r32(i2c, REG_DATAIN_REG), ++ rt_i2c_r32(i2c, REG_STATUS_REG), ++ rt_i2c_r32(i2c, REG_STARTXFR_REG), ++ rt_i2c_r32(i2c, REG_BYTECNT_REG)); ++} ++ ++static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, ++ int num) ++{ ++ struct rt_i2c *i2c; ++ struct i2c_msg *pmsg; ++ unsigned char addr; ++ int i, j, ret; ++ u32 cmd; ++ ++ i2c = i2c_get_adapdata(adap); ++ ++ for (i = 0; i < num; i++) { ++ pmsg = &msgs[i]; ++ if (i == (num - 1)) ++ cmd = 0; ++ else ++ cmd = NOSTOP_CMD; ++ ++ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n", ++ pmsg->addr, pmsg->len, pmsg->flags, ++ (cmd == 0)? 1 : 0); ++ ++ /* wait hardware idle */ ++ if ((ret = rt_i2c_wait_idle(i2c))) ++ goto err_timeout; ++ ++ if (pmsg->flags & I2C_M_TEN) { ++ rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG); ++ /* 10 bits address */ ++ addr = 0x78 | ((pmsg->addr >> 8) & 0x03); ++ rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK, ++ REG_DEVADDR_REG); ++ rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK, ++ REG_ADDR_REG); ++ } else { ++ rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS, ++ REG_CONFIG_REG); ++ /* 7 bits address */ ++ rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK, ++ REG_DEVADDR_REG); ++ } ++ ++ /* buffer length */ ++ if (pmsg->len == 0) ++ cmd |= NODATA_CMD; ++ else ++ rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len), ++ REG_BYTECNT_REG); ++ ++ j = 0; ++ if (pmsg->flags & I2C_M_RD) { ++ cmd |= READ_CMD; ++ /* start transfer */ ++ barrier(); ++ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG); ++ do { ++ /* wait */ ++ if ((ret = rt_i2c_wait_rx_done(i2c))) ++ goto err_timeout; ++ /* read data */ ++ if (pmsg->len) ++ pmsg->buf[j] = rt_i2c_r32(i2c, ++ REG_DATAIN_REG); ++ j++; ++ } while (j < pmsg->len); ++ } else { ++ do { ++ /* write data */ ++ if (pmsg->len) ++ rt_i2c_w32(i2c, pmsg->buf[j], ++ REG_DATAOUT_REG); ++ /* start transfer */ ++ if (j == 0) { ++ barrier(); ++ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG); ++ } ++ /* wait */ ++ if ((ret = rt_i2c_wait_tx_done(i2c))) ++ goto err_timeout; ++ j++; ++ } while (j < pmsg->len); ++ } ++ } ++ /* the return value is number of executed messages */ ++ ret = i; ++ ++ return ret; ++ ++err_timeout: ++ rt_i2c_dump_reg(i2c); ++ rt_i2c_reset(i2c); ++ return ret; ++} ++ ++static u32 rt_i2c_func(struct i2c_adapter *a) ++{ ++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; ++} ++ ++static const struct i2c_algorithm rt_i2c_algo = { ++ .master_xfer = rt_i2c_master_xfer, ++ .functionality = rt_i2c_func, ++}; ++ ++static const struct of_device_id i2c_rt_dt_ids[] = { ++ { .compatible = "ralink,rt2880-i2c" }, ++ { /* sentinel */ } ++}; ++ ++MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids); ++ ++static struct i2c_adapter_quirks rt_i2c_quirks = { ++ .max_write_len = BYTECNT_MAX, ++ .max_read_len = BYTECNT_MAX, ++}; ++ ++static int rt_i2c_init(struct rt_i2c *i2c) ++{ ++ u32 reg; ++ ++ /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */ ++ i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) / ++ (2 * i2c->cur_clk); ++ if (i2c->clk_div < 8) ++ i2c->clk_div = 8; ++ if (i2c->clk_div > I2C_CLKDIV_MASK) ++ i2c->clk_div = I2C_CLKDIV_MASK; ++ ++ /* check support combinde/repeated start message */ ++ rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG); ++ reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD; ++ ++ rt_i2c_reset(i2c); ++ ++ return reg; ++} ++ ++static int rt_i2c_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ struct rt_i2c *i2c; ++ struct i2c_adapter *adap; ++ const struct of_device_id *match; ++ int ret, restart; ++ ++ match = of_match_device(i2c_rt_dt_ids, &pdev->dev); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(&pdev->dev, "no memory resource found\n"); ++ return -ENODEV; ++ } ++ ++ i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL); ++ if (!i2c) { ++ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n"); ++ return -ENOMEM; ++ } ++ ++ i2c->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(i2c->base)) ++ return PTR_ERR(i2c->base); ++ ++ i2c->clk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(i2c->clk)) { ++ dev_err(&pdev->dev, "no clock defined\n"); ++ return -ENODEV; ++ } ++ clk_prepare_enable(i2c->clk); ++ i2c->dev = &pdev->dev; ++ ++ if (of_property_read_u32(pdev->dev.of_node, ++ "clock-frequency", &i2c->cur_clk)) ++ i2c->cur_clk = 100000; ++ ++ adap = &i2c->adap; ++ adap->owner = THIS_MODULE; ++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; ++ adap->algo = &rt_i2c_algo; ++ adap->retries = 3; ++ adap->dev.parent = &pdev->dev; ++ i2c_set_adapdata(adap, i2c); ++ adap->dev.of_node = pdev->dev.of_node; ++ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); ++ adap->quirks = &rt_i2c_quirks; ++ ++ platform_set_drvdata(pdev, i2c); ++ ++ restart = rt_i2c_init(i2c); ++ ++ ret = i2c_add_adapter(adap); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to add adapter\n"); ++ clk_disable_unprepare(i2c->clk); ++ return ret; ++ } ++ ++ dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n", ++ i2c->cur_clk/1000, restart ? "" : "not "); ++ ++ return ret; ++} ++ ++static int rt_i2c_remove(struct platform_device *pdev) ++{ ++ struct rt_i2c *i2c = platform_get_drvdata(pdev); ++ ++ i2c_del_adapter(&i2c->adap); ++ clk_disable_unprepare(i2c->clk); ++ ++ return 0; ++} ++ ++static struct platform_driver rt_i2c_driver = { ++ .probe = rt_i2c_probe, ++ .remove = rt_i2c_remove, ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "i2c-ralink", ++ .of_match_table = i2c_rt_dt_ids, ++ }, ++}; ++ ++static int __init i2c_rt_init (void) ++{ ++ return platform_driver_register(&rt_i2c_driver); ++} ++subsys_initcall(i2c_rt_init); ++ ++static void __exit i2c_rt_exit (void) ++{ ++ platform_driver_unregister(&rt_i2c_driver); ++} ++module_exit(i2c_rt_exit); ++ ++MODULE_AUTHOR("Steven Liu "); ++MODULE_DESCRIPTION("Ralink I2c host driver"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:Ralink-I2C"); diff --git a/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch new file mode 100644 index 0000000000..f3912a1054 --- /dev/null +++ b/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch @@ -0,0 +1,43 @@ +From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 13 Nov 2014 19:08:40 +0100 +Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC + +Signed-off-by: John Crispin +--- + drivers/mmc/host/Kconfig | 2 + + drivers/mmc/host/Makefile | 1 + + drivers/mmc/host/mtk-mmc/Kconfig | 16 + + drivers/mmc/host/mtk-mmc/Makefile | 42 + + drivers/mmc/host/mtk-mmc/board.h | 137 ++ + drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++ + drivers/mmc/host/mtk-mmc/dbg.h | 156 ++ + drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++ + drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++ + 9 files changed, 4762 insertions(+) + create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig + create mode 100644 drivers/mmc/host/mtk-mmc/Makefile + create mode 100644 drivers/mmc/host/mtk-mmc/board.h + create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c + create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h + create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h + create mode 100644 drivers/mmc/host/mtk-mmc/sd.c + +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -1019,3 +1019,5 @@ config MMC_SDHCI_AM654 + If you have a controller with this interface, say Y or M here. + + If unsure, say N. ++ ++source "drivers/mmc/host/mtk-mmc/Kconfig" +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -3,6 +3,7 @@ + # Makefile for MMC/SD host controller drivers + # + ++obj-$(CONFIG_MTK_MMC) += mtk-mmc/ + obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o + armmmci-y := mmci.o + armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o diff --git a/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch new file mode 100644 index 0000000000..d0d4141a8d --- /dev/null +++ b/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch @@ -0,0 +1,1046 @@ +From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 27 Jul 2014 09:31:47 +0100 +Subject: [PATCH 48/53] asoc: add mt7620 support + +Signed-off-by: John Crispin +--- + arch/mips/ralink/of.c | 2 + + sound/soc/Kconfig | 1 + + sound/soc/Makefile | 1 + + sound/soc/ralink/Kconfig | 15 ++ + sound/soc/ralink/Makefile | 11 + + sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++ + sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++ + 7 files changed, 699 insertions(+) + create mode 100644 sound/soc/ralink/Kconfig + create mode 100644 sound/soc/ralink/Makefile + create mode 100644 sound/soc/ralink/mt7620-i2s.c + create mode 100644 sound/soc/ralink/mt7620-wm8960.c + +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -13,6 +13,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -24,6 +25,7 @@ + #include "common.h" + + __iomem void *rt_sysc_membase; ++EXPORT_SYMBOL(rt_sysc_membase); + __iomem void *rt_memc_membase; + + __iomem void *plat_of_remap_node(const char *node) +--- a/sound/soc/Kconfig ++++ b/sound/soc/Kconfig +@@ -60,6 +60,7 @@ source "sound/soc/mxs/Kconfig" + source "sound/soc/pxa/Kconfig" + source "sound/soc/qcom/Kconfig" + source "sound/soc/rockchip/Kconfig" ++source "sound/soc/ralink/Kconfig" + source "sound/soc/samsung/Kconfig" + source "sound/soc/sh/Kconfig" + source "sound/soc/sirf/Kconfig" +--- a/sound/soc/Makefile ++++ b/sound/soc/Makefile +@@ -43,6 +43,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/ + obj-$(CONFIG_SND_SOC) += pxa/ + obj-$(CONFIG_SND_SOC) += qcom/ + obj-$(CONFIG_SND_SOC) += rockchip/ ++obj-$(CONFIG_SND_SOC) += ralink/ + obj-$(CONFIG_SND_SOC) += samsung/ + obj-$(CONFIG_SND_SOC) += sh/ + obj-$(CONFIG_SND_SOC) += sirf/ +--- /dev/null ++++ b/sound/soc/ralink/Kconfig +@@ -0,0 +1,8 @@ ++config SND_RALINK_SOC_I2S ++ depends on RALINK && SND_SOC && !SOC_RT288X ++ select SND_SOC_GENERIC_DMAENGINE_PCM ++ select REGMAP_MMIO ++ tristate "SoC Audio (I2S protocol) for Ralink SoC" ++ help ++ Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek ++ based boards. +--- /dev/null ++++ b/sound/soc/ralink/Makefile +@@ -0,0 +1,6 @@ ++# ++# Ralink/MediaTek Platform Support ++# ++snd-soc-ralink-i2s-objs := ralink-i2s.o ++ ++obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o +--- /dev/null ++++ b/sound/soc/ralink/ralink-i2s.c +@@ -0,0 +1,965 @@ ++/* ++ * Copyright (C) 2010, Lars-Peter Clausen ++ * Copyright (C) 2016 Michael Lee ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define DRV_NAME "ralink-i2s" ++ ++#define I2S_REG_CFG0 0x00 ++#define I2S_REG_INT_STATUS 0x04 ++#define I2S_REG_INT_EN 0x08 ++#define I2S_REG_FF_STATUS 0x0c ++#define I2S_REG_WREG 0x10 ++#define I2S_REG_RREG 0x14 ++#define I2S_REG_CFG1 0x18 ++#define I2S_REG_DIVCMP 0x20 ++#define I2S_REG_DIVINT 0x24 ++ ++/* I2S_REG_CFG0 */ ++#define I2S_REG_CFG0_EN BIT(31) ++#define I2S_REG_CFG0_DMA_EN BIT(30) ++#define I2S_REG_CFG0_BYTE_SWAP BIT(28) ++#define I2S_REG_CFG0_TX_EN BIT(24) ++#define I2S_REG_CFG0_RX_EN BIT(20) ++#define I2S_REG_CFG0_SLAVE BIT(16) ++#define I2S_REG_CFG0_RX_THRES 12 ++#define I2S_REG_CFG0_TX_THRES 4 ++#define I2S_REG_CFG0_THRES_MASK (0xf << I2S_REG_CFG0_RX_THRES) | \ ++ (4 << I2S_REG_CFG0_TX_THRES) ++#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \ ++ (4 << I2S_REG_CFG0_TX_THRES) ++/* RT305x */ ++#define I2S_REG_CFG0_CLK_DIS BIT(8) ++#define I2S_REG_CFG0_TXCH_SWAP BIT(3) ++#define I2S_REG_CFG0_TXCH1_OFF BIT(2) ++#define I2S_REG_CFG0_TXCH0_OFF BIT(1) ++#define I2S_REG_CFG0_SLAVE_EN BIT(0) ++/* RT3883 */ ++#define I2S_REG_CFG0_RXCH_SWAP BIT(11) ++#define I2S_REG_CFG0_RXCH1_OFF BIT(10) ++#define I2S_REG_CFG0_RXCH0_OFF BIT(9) ++#define I2S_REG_CFG0_WS_INV BIT(0) ++/* MT7628 */ ++#define I2S_REG_CFG0_FMT_LE BIT(29) ++#define I2S_REG_CFG0_SYS_BE BIT(28) ++#define I2S_REG_CFG0_NORM_24 BIT(18) ++#define I2S_REG_CFG0_DATA_24 BIT(17) ++ ++/* I2S_REG_INT_STATUS */ ++#define I2S_REG_INT_RX_FAULT BIT(7) ++#define I2S_REG_INT_RX_OVRUN BIT(6) ++#define I2S_REG_INT_RX_UNRUN BIT(5) ++#define I2S_REG_INT_RX_THRES BIT(4) ++#define I2S_REG_INT_TX_FAULT BIT(3) ++#define I2S_REG_INT_TX_OVRUN BIT(2) ++#define I2S_REG_INT_TX_UNRUN BIT(1) ++#define I2S_REG_INT_TX_THRES BIT(0) ++#define I2S_REG_INT_TX_MASK 0xf ++#define I2S_REG_INT_RX_MASK 0xf0 ++ ++/* I2S_REG_INT_STATUS */ ++#define I2S_RX_AVCNT(x) ((x >> 4) & 0xf) ++#define I2S_TX_AVCNT(x) (x & 0xf) ++/* MT7628 */ ++#define MT7628_I2S_RX_AVCNT(x) ((x >> 8) & 0x1f) ++#define MT7628_I2S_TX_AVCNT(x) (x & 0x1f) ++ ++/* I2S_REG_CFG1 */ ++#define I2S_REG_CFG1_LBK BIT(31) ++#define I2S_REG_CFG1_EXTLBK BIT(30) ++/* RT3883 */ ++#define I2S_REG_CFG1_LEFT_J BIT(0) ++#define I2S_REG_CFG1_RIGHT_J BIT(1) ++#define I2S_REG_CFG1_FMT_MASK 0x3 ++ ++/* I2S_REG_DIVCMP */ ++#define I2S_REG_DIVCMP_CLKEN BIT(31) ++#define I2S_REG_DIVCMP_DIVCOMP_MASK 0x1ff ++ ++/* I2S_REG_DIVINT */ ++#define I2S_REG_DIVINT_MASK 0x3ff ++ ++/* BCLK dividers */ ++#define RALINK_I2S_DIVCMP 0 ++#define RALINK_I2S_DIVINT 1 ++ ++/* FIFO */ ++#define RALINK_I2S_FIFO_SIZE 32 ++ ++/* feature flags */ ++#define RALINK_FLAGS_TXONLY BIT(0) ++#define RALINK_FLAGS_LEFT_J BIT(1) ++#define RALINK_FLAGS_RIGHT_J BIT(2) ++#define RALINK_FLAGS_ENDIAN BIT(3) ++#define RALINK_FLAGS_24BIT BIT(4) ++ ++#define RALINK_I2S_INT_EN 0 ++ ++struct ralink_i2s_stats { ++ u32 dmafault; ++ u32 overrun; ++ u32 underrun; ++ u32 belowthres; ++}; ++ ++struct ralink_i2s { ++ struct device *dev; ++ void __iomem *regs; ++ struct clk *clk; ++ struct regmap *regmap; ++ u32 flags; ++ unsigned int fmt; ++ u16 txdma_req; ++ u16 rxdma_req; ++ ++ struct snd_dmaengine_dai_dma_data playback_dma_data; ++ struct snd_dmaengine_dai_dma_data capture_dma_data; ++ ++ struct dentry *dbg_dir; ++ struct dentry *dbg_stats; ++ struct ralink_i2s_stats txstats; ++ struct ralink_i2s_stats rxstats; ++}; ++ ++static void ralink_i2s_dump_regs(struct ralink_i2s *i2s) ++{ ++ u32 buf[10]; ++ int ret; ++ ++ ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0, ++ buf, ARRAY_SIZE(buf)); ++ ++ dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \ ++ "FFSTAT: %08x, WREG: %08x, RREG: %08x, " \ ++ "CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n", ++ buf[0], buf[1], buf[2], buf[3], buf[4], ++ buf[5], buf[6], buf[8], buf[9]); ++} ++ ++static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai, ++ int clk_id, unsigned int freq, int dir) ++{ ++ return 0; ++} ++ ++static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate) ++{ ++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ unsigned long clk = clk_get_rate(i2s->clk); ++ int div; ++ uint32_t data; ++ ++ /* disable clock at slave mode */ ++ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) == ++ SND_SOC_DAIFMT_CBM_CFM) { ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_CLK_DIS, ++ I2S_REG_CFG0_CLK_DIS); ++ return 0; ++ } ++ ++ /* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */ ++ div = (clk / rate ) - 1; ++ ++ data = rt_sysc_r32(0x30); ++ data &= (0xff << 8); ++ data |= (0x1 << 15) | (div << 8); ++ rt_sysc_w32(data, 0x30); ++ ++ /* enable clock */ ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0); ++ ++ dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n", ++ clk, rate, div); ++ ++ return 0; ++} ++ ++static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate) ++{ ++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ unsigned long clk = clk_get_rate(i2s->clk); ++ int divint, divcomp; ++ ++ /* disable clock at slave mode */ ++ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) == ++ SND_SOC_DAIFMT_CBM_CFM) { ++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, ++ I2S_REG_DIVCMP_CLKEN, 0); ++ return 0; ++ } ++ ++ /* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */ ++ clk = clk / (2 * 2 * width); ++ divint = clk / rate; ++ divcomp = ((clk % rate) * 512) / rate; ++ ++ if ((divint > I2S_REG_DIVINT_MASK) || ++ (divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK)) ++ return -EINVAL; ++ ++ regmap_update_bits(i2s->regmap, I2S_REG_DIVINT, ++ I2S_REG_DIVINT_MASK, divint); ++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, ++ I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp); ++ ++ /* enable clock */ ++ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN, ++ I2S_REG_DIVCMP_CLKEN); ++ ++ dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n", ++ clk_get_rate(i2s->clk), rate, divint, divcomp); ++ ++ return 0; ++} ++ ++static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) ++{ ++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ unsigned int cfg0 = 0, cfg1 = 0; ++ ++ /* set master/slave audio interface */ ++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { ++ case SND_SOC_DAIFMT_CBM_CFM: ++ if (i2s->flags & RALINK_FLAGS_TXONLY) ++ cfg0 |= I2S_REG_CFG0_SLAVE_EN; ++ else ++ cfg0 |= I2S_REG_CFG0_SLAVE; ++ break; ++ case SND_SOC_DAIFMT_CBS_CFS: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ /* interface format */ ++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { ++ case SND_SOC_DAIFMT_I2S: ++ break; ++ case SND_SOC_DAIFMT_RIGHT_J: ++ if (i2s->flags & RALINK_FLAGS_RIGHT_J) { ++ cfg1 |= I2S_REG_CFG1_RIGHT_J; ++ break; ++ } ++ return -EINVAL; ++ case SND_SOC_DAIFMT_LEFT_J: ++ if (i2s->flags & RALINK_FLAGS_LEFT_J) { ++ cfg1 |= I2S_REG_CFG1_LEFT_J; ++ break; ++ } ++ return -EINVAL; ++ default: ++ return -EINVAL; ++ } ++ ++ /* clock inversion */ ++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { ++ case SND_SOC_DAIFMT_NB_NF: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (i2s->flags & RALINK_FLAGS_TXONLY) { ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_SLAVE_EN, cfg0); ++ } else { ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_SLAVE, cfg0); ++ } ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG1, ++ I2S_REG_CFG1_FMT_MASK, cfg1); ++ i2s->fmt = fmt; ++ ++ return 0; ++} ++ ++static int ralink_i2s_startup(struct snd_pcm_substream *substream, ++ struct snd_soc_dai *dai) ++{ ++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ ++ if (dai->active) ++ return 0; ++ ++ /* setup status interrupt */ ++#if (RALINK_I2S_INT_EN) ++ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff); ++#else ++ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0); ++#endif ++ ++ /* enable */ ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN | ++ I2S_REG_CFG0_THRES_MASK, ++ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN | ++ I2S_REG_CFG0_DFT_THRES); ++ ++ return 0; ++} ++ ++static void ralink_i2s_shutdown(struct snd_pcm_substream *substream, ++ struct snd_soc_dai *dai) ++{ ++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ ++ /* If both streams are stopped, disable module and clock */ ++ if (dai->active) ++ return; ++ ++ /* ++ * datasheet mention when disable all control regs are cleared ++ * to initial values. need reinit at startup. ++ */ ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0); ++} ++ ++static int ralink_i2s_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) ++{ ++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ int width; ++ int ret; ++ ++ width = params_width(params); ++ switch (width) { ++ case 16: ++ if (i2s->flags & RALINK_FLAGS_24BIT) ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_DATA_24, 0); ++ break; ++ case 24: ++ if (i2s->flags & RALINK_FLAGS_24BIT) { ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_DATA_24, ++ I2S_REG_CFG0_DATA_24); ++ break; ++ } ++ return -EINVAL; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (params_channels(params)) { ++ case 2: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (i2s->flags & RALINK_FLAGS_ENDIAN) { ++ /* system endian */ ++#ifdef SNDRV_LITTLE_ENDIAN ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_SYS_BE, 0); ++#else ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_SYS_BE, ++ I2S_REG_CFG0_SYS_BE); ++#endif ++ ++ /* data endian */ ++ switch (params_format(params)) { ++ case SNDRV_PCM_FORMAT_S16_LE: ++ case SNDRV_PCM_FORMAT_S24_LE: ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_FMT_LE, ++ I2S_REG_CFG0_FMT_LE); ++ break; ++ case SNDRV_PCM_FORMAT_S16_BE: ++ case SNDRV_PCM_FORMAT_S24_BE: ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, ++ I2S_REG_CFG0_FMT_LE, 0); ++ break; ++ default: ++ return -EINVAL; ++ } ++ } ++ ++ /* setup bclk rate */ ++ if (i2s->flags & RALINK_FLAGS_TXONLY) ++ ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params)); ++ else ++ ret = ralink_i2s_set_bclk(dai, width, params_rate(params)); ++ ++ return ret; ++} ++ ++static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd, ++ struct snd_soc_dai *dai) ++{ ++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ unsigned int mask, val; ++ ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ mask = I2S_REG_CFG0_TX_EN; ++ else ++ mask = I2S_REG_CFG0_RX_EN; ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ case SNDRV_PCM_TRIGGER_RESUME: ++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ++ val = mask; ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ case SNDRV_PCM_TRIGGER_SUSPEND: ++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH: ++ val = 0; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val); ++ ++ return 0; ++} ++ ++static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s, ++ struct resource *res) ++{ ++ struct snd_dmaengine_dai_dma_data *dma_data; ++ ++ /* Playback */ ++ dma_data = &i2s->playback_dma_data; ++ dma_data->addr = res->start + I2S_REG_WREG; ++ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ dma_data->maxburst = 1; ++ dma_data->slave_id = i2s->txdma_req; ++ ++ if (i2s->flags & RALINK_FLAGS_TXONLY) ++ return; ++ ++ /* Capture */ ++ dma_data = &i2s->capture_dma_data; ++ dma_data->addr = res->start + I2S_REG_RREG; ++ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ dma_data->maxburst = 1; ++ dma_data->slave_id = i2s->rxdma_req; ++} ++ ++static int ralink_i2s_dai_probe(struct snd_soc_dai *dai) ++{ ++ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ ++ snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data, ++ &i2s->capture_dma_data); ++ ++ return 0; ++} ++ ++static int ralink_i2s_dai_remove(struct snd_soc_dai *dai) ++{ ++ return 0; ++} ++ ++static const struct snd_soc_dai_ops ralink_i2s_dai_ops = { ++ .set_sysclk = ralink_i2s_set_sysclk, ++ .set_fmt = ralink_i2s_set_fmt, ++ .startup = ralink_i2s_startup, ++ .shutdown = ralink_i2s_shutdown, ++ .hw_params = ralink_i2s_hw_params, ++ .trigger = ralink_i2s_trigger, ++}; ++ ++static struct snd_soc_dai_driver ralink_i2s_dai = { ++ .name = DRV_NAME, ++ .probe = ralink_i2s_dai_probe, ++ .remove = ralink_i2s_dai_remove, ++ .ops = &ralink_i2s_dai_ops, ++ .capture = { ++ .stream_name = "I2S Capture", ++ .channels_min = 2, ++ .channels_max = 2, ++ .rate_min = 5512, ++ .rate_max = 192000, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .playback = { ++ .stream_name = "I2S Playback", ++ .channels_min = 2, ++ .channels_max = 2, ++ .rate_min = 5512, ++ .rate_max = 192000, ++ .rates = SNDRV_PCM_RATE_CONTINUOUS, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .symmetric_rates = 1, ++}; ++ ++static struct snd_pcm_hardware ralink_pcm_hardware = { ++ .info = SNDRV_PCM_INFO_MMAP | ++ SNDRV_PCM_INFO_MMAP_VALID | ++ SNDRV_PCM_INFO_INTERLEAVED | ++ SNDRV_PCM_INFO_BLOCK_TRANSFER, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ .channels_min = 2, ++ .channels_max = 2, ++ .period_bytes_min = PAGE_SIZE, ++ .period_bytes_max = PAGE_SIZE * 2, ++ .periods_min = 2, ++ .periods_max = 128, ++ .buffer_bytes_max = 128 * 1024, ++ .fifo_size = RALINK_I2S_FIFO_SIZE, ++}; ++ ++static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = { ++ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, ++ .pcm_hardware = &ralink_pcm_hardware, ++ .prealloc_buffer_size = 256 * PAGE_SIZE, ++}; ++ ++static const struct snd_soc_component_driver ralink_i2s_component = { ++ .name = DRV_NAME, ++}; ++ ++static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg) ++{ ++ return true; ++} ++ ++static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg) ++{ ++ switch (reg) { ++ case I2S_REG_INT_STATUS: ++ case I2S_REG_FF_STATUS: ++ return true; ++ } ++ return false; ++} ++ ++static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg) ++{ ++ switch (reg) { ++ case I2S_REG_FF_STATUS: ++ case I2S_REG_RREG: ++ return false; ++ } ++ return true; ++} ++ ++static const struct regmap_config ralink_i2s_regmap_config = { ++ .reg_bits = 32, ++ .reg_stride = 4, ++ .val_bits = 32, ++ .writeable_reg = ralink_i2s_writeable_reg, ++ .readable_reg = ralink_i2s_readable_reg, ++ .volatile_reg = ralink_i2s_volatile_reg, ++ .max_register = I2S_REG_DIVINT, ++}; ++ ++#if (RALINK_I2S_INT_EN) ++static irqreturn_t ralink_i2s_irq(int irq, void *devid) ++{ ++ struct ralink_i2s *i2s = devid; ++ u32 status; ++ ++ regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status); ++ if (unlikely(!status)) ++ return IRQ_NONE; ++ ++ /* tx stats */ ++ if (status & I2S_REG_INT_TX_MASK) { ++ if (status & I2S_REG_INT_TX_THRES) ++ i2s->txstats.belowthres++; ++ if (status & I2S_REG_INT_TX_UNRUN) ++ i2s->txstats.underrun++; ++ if (status & I2S_REG_INT_TX_OVRUN) ++ i2s->txstats.overrun++; ++ if (status & I2S_REG_INT_TX_FAULT) ++ i2s->txstats.dmafault++; ++ } ++ ++ /* rx stats */ ++ if (status & I2S_REG_INT_RX_MASK) { ++ if (status & I2S_REG_INT_RX_THRES) ++ i2s->rxstats.belowthres++; ++ if (status & I2S_REG_INT_RX_UNRUN) ++ i2s->rxstats.underrun++; ++ if (status & I2S_REG_INT_RX_OVRUN) ++ i2s->rxstats.overrun++; ++ if (status & I2S_REG_INT_RX_FAULT) ++ i2s->rxstats.dmafault++; ++ } ++ ++ /* clean status bits */ ++ regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status); ++ ++ return IRQ_HANDLED; ++} ++#endif ++ ++#if IS_ENABLED(CONFIG_DEBUG_FS) ++static int ralink_i2s_stats_show(struct seq_file *s, void *unused) ++{ ++ struct ralink_i2s *i2s = s->private; ++ ++ seq_printf(s, "tx stats\n"); ++ seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres); ++ seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun); ++ seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun); ++ seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault); ++ ++ seq_printf(s, "rx stats\n"); ++ seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres); ++ seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun); ++ seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun); ++ seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault); ++ ++ ralink_i2s_dump_regs(i2s); ++ ++ return 0; ++} ++ ++static int ralink_i2s_stats_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, ralink_i2s_stats_show, inode->i_private); ++} ++ ++static const struct file_operations ralink_i2s_stats_ops = { ++ .open = ralink_i2s_stats_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s) ++{ ++ i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL); ++ if (!i2s->dbg_dir) ++ return -ENOMEM; ++ ++ i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO, ++ i2s->dbg_dir, i2s, &ralink_i2s_stats_ops); ++ if (!i2s->dbg_stats) { ++ debugfs_remove(i2s->dbg_dir); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s) ++{ ++ debugfs_remove(i2s->dbg_stats); ++ debugfs_remove(i2s->dbg_dir); ++} ++#else ++static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s) ++{ ++ return 0; ++} ++ ++static inline void ralink_i2s_debugfs_remove(struct fsl_ssi_dbg *ssi_dbg) ++{ ++} ++#endif ++ ++/* ++ * TODO: these refclk setup functions should use ++ * clock framework instead. hardcode it now. ++ */ ++static void rt3350_refclk_setup(void) ++{ ++ uint32_t data; ++ ++ /* set refclk output 12Mhz clock */ ++ data = rt_sysc_r32(0x2c); ++ data |= (0x1 << 8); ++ rt_sysc_w32(data, 0x2c); ++} ++ ++static void rt3883_refclk_setup(void) ++{ ++ uint32_t data; ++ ++ /* set refclk output 12Mhz clock */ ++ data = rt_sysc_r32(0x2c); ++ data &= ~(0x3 << 13); ++ data |= (0x1 << 13); ++ rt_sysc_w32(data, 0x2c); ++} ++ ++static void rt3552_refclk_setup(void) ++{ ++ uint32_t data; ++ ++ /* set refclk output 12Mhz clock */ ++ data = rt_sysc_r32(0x2c); ++ data &= ~(0xf << 8); ++ data |= (0x3 << 8); ++ rt_sysc_w32(data, 0x2c); ++} ++ ++static void mt7620_refclk_setup(void) ++{ ++ uint32_t data; ++ ++ /* set refclk output 12Mhz clock */ ++ data = rt_sysc_r32(0x2c); ++ data &= ~(0x7 << 9); ++ data |= 0x1 << 9; ++ rt_sysc_w32(data, 0x2c); ++} ++ ++static void mt7621_refclk_setup(void) ++{ ++ uint32_t data; ++ ++ /* set refclk output 12Mhz clock */ ++ data = rt_sysc_r32(0x2c); ++ data &= ~(0x1f << 18); ++ data |= (0x19 << 18); ++ data &= ~(0x1f << 12); ++ data |= (0x1 << 12); ++ data &= ~(0x7 << 9); ++ data |= (0x5 << 9); ++ rt_sysc_w32(data, 0x2c); ++} ++ ++static void mt7628_refclk_setup(void) ++{ ++ uint32_t data; ++ ++ /* set i2s and refclk digital pad */ ++ data = rt_sysc_r32(0x3c); ++ data |= 0x1f; ++ rt_sysc_w32(data, 0x3c); ++ ++ /* Adjust REFCLK0's driving strength */ ++ data = rt_sysc_r32(0x1354); ++ data &= ~(0x1 << 5); ++ rt_sysc_w32(data, 0x1354); ++ data = rt_sysc_r32(0x1364); ++ data |= ~(0x1 << 5); ++ rt_sysc_w32(data, 0x1364); ++ ++ /* set refclk output 12Mhz clock */ ++ data = rt_sysc_r32(0x2c); ++ data &= ~(0x7 << 9); ++ data |= 0x1 << 9; ++ rt_sysc_w32(data, 0x2c); ++} ++ ++struct rt_i2s_data { ++ u32 flags; ++ void (*refclk_setup)(void); ++}; ++ ++struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY }; ++struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY, ++ .refclk_setup = rt3350_refclk_setup }; ++struct rt_i2s_data rt3883_i2s_data = { ++ .flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J), ++ .refclk_setup = rt3883_refclk_setup }; ++struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup}; ++struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup}; ++struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup}; ++struct rt_i2s_data mt7628_i2s_data = { ++ .flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT | ++ RALINK_FLAGS_LEFT_J), ++ .refclk_setup = mt7628_refclk_setup}; ++ ++static const struct of_device_id ralink_i2s_match_table[] = { ++ { .compatible = "ralink,rt3050-i2s", ++ .data = (void *)&rt3050_i2s_data }, ++ { .compatible = "ralink,rt3350-i2s", ++ .data = (void *)&rt3350_i2s_data }, ++ { .compatible = "ralink,rt3883-i2s", ++ .data = (void *)&rt3883_i2s_data }, ++ { .compatible = "ralink,rt3352-i2s", ++ .data = (void *)&rt3352_i2s_data }, ++ { .compatible = "mediatek,mt7620-i2s", ++ .data = (void *)&mt7620_i2s_data }, ++ { .compatible = "mediatek,mt7621-i2s", ++ .data = (void *)&mt7621_i2s_data }, ++ { .compatible = "mediatek,mt7628-i2s", ++ .data = (void *)&mt7628_i2s_data }, ++}; ++MODULE_DEVICE_TABLE(of, ralink_i2s_match_table); ++ ++static int ralink_i2s_probe(struct platform_device *pdev) ++{ ++ const struct of_device_id *match; ++ struct device_node *np = pdev->dev.of_node; ++ struct ralink_i2s *i2s; ++ struct resource *res; ++ int irq, ret; ++ u32 dma_req; ++ struct rt_i2s_data *data; ++ ++ i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL); ++ if (!i2s) ++ return -ENOMEM; ++ ++ platform_set_drvdata(pdev, i2s); ++ i2s->dev = &pdev->dev; ++ ++ match = of_match_device(ralink_i2s_match_table, &pdev->dev); ++ if (!match) ++ return -EINVAL; ++ data = (struct rt_i2s_data *)match->data; ++ i2s->flags = data->flags; ++ /* setup out 12Mhz refclk to codec as mclk */ ++ if (data->refclk_setup) ++ data->refclk_setup(); ++ ++ if (of_property_read_u32(np, "txdma-req", &dma_req)) { ++ dev_err(&pdev->dev, "no txdma-req define\n"); ++ return -EINVAL; ++ } ++ i2s->txdma_req = (u16)dma_req; ++ if (!(i2s->flags & RALINK_FLAGS_TXONLY)) { ++ if (of_property_read_u32(np, "rxdma-req", &dma_req)) { ++ dev_err(&pdev->dev, "no rxdma-req define\n"); ++ return -EINVAL; ++ } ++ i2s->rxdma_req = (u16)dma_req; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ i2s->regs = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(i2s->regs)) ++ return PTR_ERR(i2s->regs); ++ ++ i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs, ++ &ralink_i2s_regmap_config); ++ if (IS_ERR(i2s->regmap)) { ++ dev_err(&pdev->dev, "regmap init failed\n"); ++ return PTR_ERR(i2s->regmap); ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) { ++ dev_err(&pdev->dev, "failed to get irq\n"); ++ return -EINVAL; ++ } ++ ++#if (RALINK_I2S_INT_EN) ++ ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq, ++ 0, dev_name(&pdev->dev), i2s); ++ if (ret) { ++ dev_err(&pdev->dev, "failed to request irq\n"); ++ return ret; ++ } ++#endif ++ ++ i2s->clk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(i2s->clk)) { ++ dev_err(&pdev->dev, "no clock defined\n"); ++ return PTR_ERR(i2s->clk); ++ } ++ ++ ret = clk_prepare_enable(i2s->clk); ++ if (ret) ++ return ret; ++ ++ ralink_i2s_init_dma_data(i2s, res); ++ ++ device_reset(&pdev->dev); ++ ++ ret = ralink_i2s_debugfs_create(i2s); ++ if (ret) { ++ dev_err(&pdev->dev, "create debugfs failed\n"); ++ goto err_clk_disable; ++ } ++ ++ /* enable 24bits support */ ++ if (i2s->flags & RALINK_FLAGS_24BIT) { ++ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE; ++ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE; ++ } ++ ++ /* enable big endian support */ ++ if (i2s->flags & RALINK_FLAGS_ENDIAN) { ++ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE; ++ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE; ++ ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE; ++ if (i2s->flags & RALINK_FLAGS_24BIT) { ++ ralink_i2s_dai.capture.formats |= ++ SNDRV_PCM_FMTBIT_S24_BE; ++ ralink_i2s_dai.playback.formats |= ++ SNDRV_PCM_FMTBIT_S24_BE; ++ ralink_pcm_hardware.formats |= ++ SNDRV_PCM_FMTBIT_S24_BE; ++ } ++ } ++ ++ /* disable capture support */ ++ if (i2s->flags & RALINK_FLAGS_TXONLY) ++ memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture), ++ 0); ++ ++ ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component, ++ &ralink_i2s_dai, 1); ++ if (ret) ++ goto err_debugfs; ++ ++ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, ++ &ralink_dmaengine_pcm_config, ++ SND_DMAENGINE_PCM_FLAG_COMPAT); ++ if (ret) ++ goto err_debugfs; ++ ++ dev_info(i2s->dev, "mclk %luMHz\n", clk_get_rate(i2s->clk) / 1000000); ++ ++ return 0; ++ ++err_debugfs: ++ ralink_i2s_debugfs_remove(i2s); ++ ++err_clk_disable: ++ clk_disable_unprepare(i2s->clk); ++ ++ return ret; ++} ++ ++static int ralink_i2s_remove(struct platform_device *pdev) ++{ ++ struct ralink_i2s *i2s = platform_get_drvdata(pdev); ++ ++ ralink_i2s_debugfs_remove(i2s); ++ clk_disable_unprepare(i2s->clk); ++ ++ return 0; ++} ++ ++static struct platform_driver ralink_i2s_driver = { ++ .probe = ralink_i2s_probe, ++ .remove = ralink_i2s_remove, ++ .driver = { ++ .name = DRV_NAME, ++ .of_match_table = ralink_i2s_match_table, ++ }, ++}; ++module_platform_driver(ralink_i2s_driver); ++ ++MODULE_AUTHOR("Lars-Peter Clausen, "); ++MODULE_DESCRIPTION("Ralink/MediaTek I2S driver"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:" DRV_NAME); diff --git a/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch new file mode 100644 index 0000000000..4822226610 --- /dev/null +++ b/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch @@ -0,0 +1,22 @@ +From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 7 Dec 2015 17:31:08 +0100 +Subject: [PATCH 51/53] serial: add ugly custom baud rate hack + +Signed-off-by: John Crispin +--- + drivers/tty/serial/serial_core.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/tty/serial/serial_core.c ++++ b/drivers/tty/serial/serial_core.c +@@ -416,6 +416,9 @@ uart_get_baud_rate(struct uart_port *por + break; + } + ++ if (tty_termios_baud_rate(termios) == 2500000) ++ return 250000; ++ + for (try = 0; try < 2; try++) { + baud = tty_termios_baud_rate(termios); + diff --git a/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch b/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch new file mode 100644 index 0000000000..d2c5724c06 --- /dev/null +++ b/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch @@ -0,0 +1,217 @@ +From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 7 Dec 2015 17:16:50 +0100 +Subject: [PATCH 52/53] pwm: add mediatek support + +Signed-off-by: John Crispin +--- + drivers/pwm/Kconfig | 9 +++ + drivers/pwm/Makefile | 1 + + drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 183 insertions(+) + create mode 100644 drivers/pwm/pwm-mediatek.c + +--- a/drivers/pwm/Kconfig ++++ b/drivers/pwm/Kconfig +@@ -316,6 +316,15 @@ config PWM_MEDIATEK + To compile this driver as a module, choose M here: the module + will be called pwm-mediatek. + ++config PWM_MEDIATEK_RAMIPS ++ tristate "Mediatek PWM support" ++ depends on RALINK && OF ++ help ++ Generic PWM framework driver for Mediatek ARM SoC. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called pwm-mxs. ++ + config PWM_MXS + tristate "Freescale MXS PWM support" + depends on ARCH_MXS && OF +--- a/drivers/pwm/Makefile ++++ b/drivers/pwm/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p + obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o + obj-$(CONFIG_PWM_MESON) += pwm-meson.o + obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o ++obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o + obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o + obj-$(CONFIG_PWM_MXS) += pwm-mxs.o + obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o +--- /dev/null ++++ b/drivers/pwm/pwm-mediatek-ramips.c +@@ -0,0 +1,173 @@ ++/* ++ * Mediatek Pulse Width Modulator driver ++ * ++ * Copyright (C) 2015 John Crispin ++ * ++ * This file is licensed under the terms of the GNU General Public ++ * License version 2. This program is licensed "as is" without any ++ * warranty of any kind, whether express or implied. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define NUM_PWM 4 ++ ++/* PWM registers and bits definitions */ ++#define PWMCON 0x00 ++#define PWMHDUR 0x04 ++#define PWMLDUR 0x08 ++#define PWMGDUR 0x0c ++#define PWMWAVENUM 0x28 ++#define PWMDWIDTH 0x2c ++#define PWMTHRES 0x30 ++ ++/** ++ * struct mtk_pwm_chip - struct representing pwm chip ++ * ++ * @mmio_base: base address of pwm chip ++ * @chip: linux pwm chip representation ++ */ ++struct mtk_pwm_chip { ++ void __iomem *mmio_base; ++ struct pwm_chip chip; ++}; ++ ++static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip) ++{ ++ return container_of(chip, struct mtk_pwm_chip, chip); ++} ++ ++static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num, ++ unsigned long offset) ++{ ++ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset); ++} ++ ++static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip, ++ unsigned int num, unsigned long offset, ++ unsigned long val) ++{ ++ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset); ++} ++ ++static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, ++ int duty_ns, int period_ns) ++{ ++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); ++ u32 resolution = 100 / 4; ++ u32 clkdiv = 0; ++ ++ while (period_ns / resolution > 8191) { ++ clkdiv++; ++ resolution *= 2; ++ } ++ ++ if (clkdiv > 7) ++ return -1; ++ ++ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv); ++ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution); ++ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution); ++ return 0; ++} ++ ++static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) ++{ ++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); ++ u32 val; ++ ++ val = ioread32(pc->mmio_base); ++ val |= BIT(pwm->hwpwm); ++ iowrite32(val, pc->mmio_base); ++ ++ return 0; ++} ++ ++static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) ++{ ++ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); ++ u32 val; ++ ++ val = ioread32(pc->mmio_base); ++ val &= ~BIT(pwm->hwpwm); ++ iowrite32(val, pc->mmio_base); ++} ++ ++static const struct pwm_ops mtk_pwm_ops = { ++ .config = mtk_pwm_config, ++ .enable = mtk_pwm_enable, ++ .disable = mtk_pwm_disable, ++ .owner = THIS_MODULE, ++}; ++ ++static int mtk_pwm_probe(struct platform_device *pdev) ++{ ++ struct mtk_pwm_chip *pc; ++ struct resource *r; ++ int ret; ++ ++ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); ++ if (!pc) ++ return -ENOMEM; ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); ++ if (IS_ERR(pc->mmio_base)) ++ return PTR_ERR(pc->mmio_base); ++ ++ platform_set_drvdata(pdev, pc); ++ ++ pc->chip.dev = &pdev->dev; ++ pc->chip.ops = &mtk_pwm_ops; ++ pc->chip.base = -1; ++ pc->chip.npwm = NUM_PWM; ++ ++ ret = pwmchip_add(&pc->chip); ++ if (ret < 0) ++ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); ++ ++ return ret; ++} ++ ++static int mtk_pwm_remove(struct platform_device *pdev) ++{ ++ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev); ++ int i; ++ ++ for (i = 0; i < NUM_PWM; i++) ++ pwm_disable(&pc->chip.pwms[i]); ++ ++ return pwmchip_remove(&pc->chip); ++} ++ ++static const struct of_device_id mtk_pwm_of_match[] = { ++ { .compatible = "mediatek,mt7628-pwm" }, ++ { } ++}; ++ ++MODULE_DEVICE_TABLE(of, mtk_pwm_of_match); ++ ++static struct platform_driver mtk_pwm_driver = { ++ .driver = { ++ .name = "mtk-pwm", ++ .owner = THIS_MODULE, ++ .of_match_table = mtk_pwm_of_match, ++ }, ++ .probe = mtk_pwm_probe, ++ .remove = mtk_pwm_remove, ++}; ++ ++module_platform_driver(mtk_pwm_driver); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("John Crispin "); ++MODULE_ALIAS("platform:mtk-pwm"); diff --git a/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch b/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch new file mode 100644 index 0000000000..7110a5b808 --- /dev/null +++ b/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch @@ -0,0 +1,15 @@ +--- a/drivers/usb/dwc2/platform.c ++++ b/drivers/usb/dwc2/platform.c +@@ -431,6 +431,12 @@ static int dwc2_driver_probe(struct plat + if (retval) + return retval; + ++ /* Enable USB port before any regs access */ ++ if (readl(hsotg->regs + PCGCTL) & 0x0f) { ++ writel(0x00, hsotg->regs + PCGCTL); ++ /* TODO: mdelay(25) here? vendor driver don't use it */ ++ } ++ + hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg); + + retval = dwc2_get_dr_mode(hsotg); diff --git a/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch b/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch new file mode 100644 index 0000000000..9142faaf43 --- /dev/null +++ b/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch @@ -0,0 +1,97 @@ +--- a/drivers/misc/Makefile ++++ b/drivers/misc/Makefile +@@ -52,6 +52,7 @@ obj-$(CONFIG_ECHO) += echo/ + obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o + obj-$(CONFIG_CXL_BASE) += cxl/ + obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o ++obj-$(CONFIG_SOC_MT7620) += linkit.o + obj-$(CONFIG_OCXL) += ocxl/ + obj-y += cardreader/ + obj-$(CONFIG_PVPANIC) += pvpanic.o +--- /dev/null ++++ b/drivers/misc/linkit.c +@@ -0,0 +1,84 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * publishhed by the Free Software Foundation. ++ * ++ * Copyright (C) 2015 John Crispin ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define LINKIT_LATCH_GPIO 11 ++ ++struct linkit_hw_data { ++ char board[16]; ++ char rev[16]; ++}; ++ ++static void sanify_string(char *s) ++{ ++ int i; ++ ++ for (i = 0; i < 15; i++) ++ if (s[i] <= 0x20) ++ s[i] = '\0'; ++ s[15] = '\0'; ++} ++ ++static int linkit_probe(struct platform_device *pdev) ++{ ++ struct linkit_hw_data hw; ++ struct mtd_info *mtd; ++ size_t retlen; ++ int ret; ++ ++ mtd = get_mtd_device_nm("factory"); ++ if (IS_ERR(mtd)) ++ return PTR_ERR(mtd); ++ ++ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw); ++ put_mtd_device(mtd); ++ ++ sanify_string(hw.board); ++ sanify_string(hw.rev); ++ ++ dev_info(&pdev->dev, "Version : %s\n", hw.board); ++ dev_info(&pdev->dev, "Revision : %s\n", hw.rev); ++ ++ if (!strcmp(hw.board, "LINKITS7688")) { ++ dev_info(&pdev->dev, "setting up bootstrap latch\n"); ++ ++ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) { ++ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n"); ++ return -1; ++ } ++ gpio_direction_output(LINKIT_LATCH_GPIO, 0); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id linkit_match[] = { ++ { .compatible = "mediatek,linkit" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, linkit_match); ++ ++static struct platform_driver linkit_driver = { ++ .probe = linkit_probe, ++ .driver = { ++ .name = "mtk-linkit", ++ .owner = THIS_MODULE, ++ .of_match_table = linkit_match, ++ }, ++}; ++ ++int __init linkit_init(void) ++{ ++ return platform_driver_register(&linkit_driver); ++} ++late_initcall_sync(linkit_init); diff --git a/target/linux/ramips/patches-5.10/990-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-5.10/990-NET-no-auto-carrier-off-support.patch deleted file mode 100644 index a31d1ac3a6..0000000000 --- a/target/linux/ramips/patches-5.10/990-NET-no-auto-carrier-off-support.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 09:38:50 +0100 -Subject: [PATCH 34/53] NET: multi phy support - -Signed-off-by: John Crispin ---- - drivers/net/phy/phy.c | 9 ++++++--- - include/linux/phy.h | 1 + - 2 files changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -546,7 +546,10 @@ static int phy_check_link_status(struct - phy_link_up(phydev); - } else if (!phydev->link && phydev->state != PHY_NOLINK) { - phydev->state = PHY_NOLINK; -- phy_link_down(phydev, true); -+ if (!phydev->no_auto_carrier_off) -+ phy_link_down(phydev, true); -+ else -+ phy_link_down(phydev, false); - } - - return 0; -@@ -926,7 +929,10 @@ void phy_state_machine(struct work_struc - case PHY_HALTED: - if (phydev->link) { - phydev->link = 0; -- phy_link_down(phydev, true); -+ if (!phydev->no_auto_carrier_off) -+ phy_link_down(phydev, true); -+ else -+ phy_link_down(phydev, false); - } - do_suspend = true; - break; ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -380,6 +380,7 @@ struct phy_device { - unsigned suspended_by_mdio_bus:1; - unsigned sysfs_links:1; - unsigned loopback_enabled:1; -+ unsigned no_auto_carrier_off:1; - - unsigned autoneg:1; - /* The most recently read link state */ diff --git a/target/linux/ramips/patches-5.10/991-at803x.patch b/target/linux/ramips/patches-5.10/991-at803x.patch deleted file mode 100644 index af0132f8f7..0000000000 --- a/target/linux/ramips/patches-5.10/991-at803x.patch +++ /dev/null @@ -1,156 +0,0 @@ -From 924453aa9d2324e5611f8e2b71df746d8f0c79f1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= -Date: Fri, 13 Nov 2020 16:11:32 +0100 -Subject: [PATCH] net: phy: at803x: add support for SFP module in - RGMII-to-x-base mode -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: René van Dorst ---- - drivers/net/phy/at803x.c | 91 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 91 insertions(+) - ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -14,6 +14,8 @@ - #include - #include - #include -+#include -+#include - - #define AT803X_SPECIFIC_STATUS 0x11 - #define AT803X_SS_SPEED_MASK (3 << 14) -@@ -53,9 +55,18 @@ - - #define AT803X_MODE_CFG_MASK 0x0F - #define AT803X_MODE_CFG_SGMII 0x01 -+#define AT803X_MODE_CFG_BX1000_RGMII_50 0x02 -+#define AT803X_MODE_CFG_BX1000_RGMII_75 0x03 -+#define AT803X_MODE_FIBER 0x01 -+#define AT803X_MODE_COPPER 0x00 - - #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ - #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 -+#define PSSR_LINK BIT(10) -+#define PSSR_SYNC_STATUS BIT(8) -+#define PSSR_DUPLEX BIT(13) -+#define PSSR_SPEED_1000 BIT(15) -+#define PSSR_SPEED_100 BIT(14) - - #define AT803X_DEBUG_REG_0 0x00 - #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) -@@ -243,10 +254,72 @@ static int at803x_resume(struct phy_devi - return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); - } - -+static int at803x_mode(struct phy_device *phydev) -+{ -+ int mode; -+ -+ mode = phy_read(phydev, AT803X_REG_CHIP_CONFIG) & AT803X_MODE_CFG_MASK; -+ -+ if (mode == AT803X_MODE_CFG_BX1000_RGMII_50 || -+ mode == AT803X_MODE_CFG_BX1000_RGMII_75) -+ return AT803X_MODE_FIBER; -+ return AT803X_MODE_COPPER; -+} -+ -+static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -+{ -+ __ETHTOOL_DECLARE_LINK_MODE_MASK(at803x_support) = { 0, }; -+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; -+ struct phy_device *phydev = upstream; -+ phy_interface_t iface; -+ -+ phylink_set(at803x_support, 1000baseX_Full); -+ /* AT803x only support 1000baseX but SGMII works fine when module runs -+ * at 1Gbit. -+ */ -+ phylink_set(at803x_support, 1000baseT_Full); -+ -+ sfp_parse_support(phydev->sfp_bus, id, support); -+ -+ // Limit to interfaces that both sides support -+ linkmode_and(support, support, at803x_support); -+ -+ if (linkmode_empty(support)) -+ goto unsupported_mode; -+ -+ iface = sfp_select_interface(phydev->sfp_bus, support); -+ -+ if (iface != PHY_INTERFACE_MODE_SGMII && -+ iface != PHY_INTERFACE_MODE_1000BASEX) -+ goto unsupported_mode; -+ -+ dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface)); -+ -+ return 0; -+ -+unsupported_mode: -+ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;" -+ "Only SGMII at 1Gbit/1000BASEX are supported!\n"); -+ return -EINVAL; -+} -+ -+static const struct sfp_upstream_ops at803x_sfp_ops = { -+ .attach = phy_sfp_attach, -+ .detach = phy_sfp_detach, -+ .module_insert = at803x_sfp_insert, -+}; -+ - static int at803x_probe(struct phy_device *phydev) - { - struct device *dev = &phydev->mdio.dev; - struct at803x_priv *priv; -+ int ret; -+ -+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) { -+ ret = phy_sfp_probe(phydev, &at803x_sfp_ops); -+ if (ret < 0) -+ return ret; -+ } - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) -@@ -394,6 +467,10 @@ static int at803x_read_status(struct phy - { - int ss, err, old_link = phydev->link; - -+ /* Handle (Fiber) SGMII to RGMII mode */ -+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) -+ return genphy_c37_read_status(phydev); -+ - /* Update the link, but return if there was an error */ - err = genphy_update_link(phydev); - if (err) -@@ -448,6 +525,19 @@ static int at803x_read_status(struct phy - return 0; - } - -+static int at803x_config_aneg(struct phy_device *phydev) -+{ -+ /* Handle (Fiber) SerDes to RGMII mode */ -+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) { -+ pr_warn("%s: fiber\n", __func__); -+ return genphy_c37_config_aneg(phydev); -+ } -+ -+ pr_warn("%s: enter\n", __func__); -+ -+ return genphy_config_aneg(phydev); -+} -+ - static struct phy_driver at803x_driver[] = { - { - /* ATHEROS 8035 */ -@@ -491,6 +581,7 @@ static struct phy_driver at803x_driver[] - .suspend = at803x_suspend, - .resume = at803x_resume, - /* PHY_GBIT_FEATURES */ -+ .config_aneg = at803x_config_aneg, - .read_status = at803x_read_status, - .aneg_done = at803x_aneg_done, - .ack_interrupt = &at803x_ack_interrupt, diff --git a/target/linux/ramips/patches-5.10/999-fix-pci-init-mt7620.patch b/target/linux/ramips/patches-5.10/999-fix-pci-init-mt7620.patch deleted file mode 100644 index 7c00d4c9ae..0000000000 --- a/target/linux/ramips/patches-5.10/999-fix-pci-init-mt7620.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/pci/pci-mt7620.c -+++ b/arch/mips/pci/pci-mt7620.c -@@ -32,6 +32,7 @@ - #define PPLL_CFG1 0x9c - - #define PPLL_DRV 0xa0 -+#define PPLL_LD BIT(23) - #define PDRV_SW_SET BIT(31) - #define LC_CKDRVPD BIT(19) - #define LC_CKDRVOHZ BIT(18) -@@ -239,8 +240,8 @@ static int mt7620_pci_hw_init(struct pla - rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); - mdelay(100); - -- if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) { -- dev_err(&pdev->dev, "MT7620 PPLL unlock\n"); -+ if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) { -+ dev_err(&pdev->dev, "MT7620 PPLL is unlocked, aborting init\n"); - reset_control_assert(rstpcie0); - rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); - return -1;