From: John Crispin <john@openwrt.org>
Date: Thu, 10 Apr 2014 08:14:33 +0000 (+0000)
Subject: lantiq: move the dsl-modem config to network.@dsl-modem[-1]
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eebc673f1e325a0e716087975f2daf552e9ab689;p=openwrt%2Fstaging%2Fynezz.git

lantiq: move the dsl-modem config to network.@dsl-modem[-1]

make sure uci_defaults generates a proper uci config for the v/adsl modem

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40439
---

diff --git a/package/network/config/ltq-adsl-app/files/dsl_control b/package/network/config/ltq-adsl-app/files/dsl_control
index d48f3f6266..e48b72b059 100644
--- a/package/network/config/ltq-adsl-app/files/dsl_control
+++ b/package/network/config/ltq-adsl-app/files/dsl_control
@@ -32,8 +32,8 @@ start() {
 	local firmware
 	local xtu
 	config_load network
-	config_get annex wan annex
-	config_get firmware wan firmware
+	config_get annex dsl annex
+	config_get firmware dsl firmware
 
 	eval "xtu=\"\${annex_$annex}\""
 
diff --git a/package/network/config/ltq-vdsl-app/files/dsl_control b/package/network/config/ltq-vdsl-app/files/dsl_control
index 81db4d2641..c6be228494 100644
--- a/package/network/config/ltq-vdsl-app/files/dsl_control
+++ b/package/network/config/ltq-vdsl-app/files/dsl_control
@@ -134,10 +134,10 @@ start() {
 	local mode
 
 	config_load network
-	config_get tone wan tone
-	config_get annex wan annex
-	config_get firmware wan firmware
-	config_get xfer_mode wan xfer_mode
+	config_get tone dsl tone
+	config_get annex dsl annex
+	config_get firmware dsl firmware
+	config_get xfer_mode dsl xfer_mode
 
 	[ -z "${xfer_mode}" ] && xfer_mode=ptm
 
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index 428089ceb7..ac06e5f278 100644
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -28,6 +28,30 @@ set network.wan6.proto='dhcpv6'
 EOF
 }
 
+set_adsl_modem() {
+	local annex=$1
+	local firmware=$2
+	uci batch <<EOF
+set network.adsl='dsl-modem'
+set network.adsl.annex='$annex'
+set network.adsl.firmware='$firmware'
+EOF
+}
+
+set_vdsl_modem() {
+	local annex=$1
+	local firmware=$2
+	local tone=$3
+	local xfer_mode=$4
+	uci batch <<EOF
+set network.vdsl='dsl-modem'
+set network.vdsl.annex='$annex'
+set network.vdsl.firmware='$firmware'
+set network.vdsl.tone='$tone'
+set network.vdsl.xfer_mode='$xfer_mode'
+EOF
+}
+
 . /lib/functions/uci-defaults.sh
 . /lib/functions/lantiq.sh
 
@@ -38,6 +62,7 @@ ucidef_set_interface_lan 'eth0'
 
 vpi=1
 vci=32
+annex="a"
 encaps="llc"
 payload="bridged"
 lan_mac=""
@@ -143,6 +168,13 @@ BTHOMEHUBV2B)
 esac
 
 [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
+
+if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then
+	set_vdsl_modem "$annex" "vdsl.bin" "bv" "ptm"
+else
+	set_adsl_modem "$annex" "adsl.bin"
+fi
+
 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac