From: Martin Peres Date: Tue, 5 Mar 2013 09:35:20 +0000 (+0100) Subject: drm/nv40/therm: increase the sensor's settling delay to 20ms X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eea4eb14a0f74f806e7a458f174f880744a68bdd;p=openwrt%2Fstaging%2Fblogic.git drm/nv40/therm: increase the sensor's settling delay to 20ms Based on my experience, 10ms wasn't always enough. Let's bump that to a little more. If this turns out to be insufficient-enough again, then an approach based on letting the sensor settle for several seconds before starting polling on the temperature would be better suited. This way, boot time wouldn't be impacted by those waits too much. Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs --- diff --git a/drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c b/drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c index d8f43252c048..0575af5328ec 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c +++ b/drivers/gpu/drm/nouveau/core/subdev/therm/nv40.c @@ -66,10 +66,11 @@ nv40_sensor_setup(struct nouveau_therm *therm) if (style == NEW_STYLE) { nv_mask(therm, 0x15b8, 0x80000000, 0); nv_wr32(therm, 0x15b0, 0x80003fff); - mdelay(10); /* wait for the temperature to stabilize */ + mdelay(20); /* wait for the temperature to stabilize */ return nv_rd32(therm, 0x15b4) & 0x3fff; } else if (style == OLD_STYLE) { nv_wr32(therm, 0x15b0, 0xff); + mdelay(20); /* wait for the temperature to stabilize */ return nv_rd32(therm, 0x15b4) & 0xff; } else return -ENODEV;