From: Álvaro Fernández Rojas Date: Thu, 14 May 2020 12:51:58 +0000 (+0200) Subject: bcm63xx: remove linux 4.14 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eea23c200445648caef53cfbbefe84c4481fe600;p=openwrt%2Fstaging%2Fneocturne.git bcm63xx: remove linux 4.14 support Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bcm63xx/config-4.14 b/target/linux/bcm63xx/config-4.14 deleted file mode 100644 index 8e4952e9e5..0000000000 --- a/target/linux/bcm63xx/config-4.14 +++ /dev/null @@ -1,279 +0,0 @@ -CONFIG_ARCH_BINFMT_ELF_STATE=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set -# CONFIG_ARCH_HAS_SG_CHAIN is not set -# CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is not set -# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_BCM6345_EXT_IRQ=y -CONFIG_BCM6345_PERIPH_IRQ=y -CONFIG_BCM63XX=y -CONFIG_BCM63XX_CPU_3368=y -CONFIG_BCM63XX_CPU_6318=y -CONFIG_BCM63XX_CPU_63268=y -CONFIG_BCM63XX_CPU_6328=y -CONFIG_BCM63XX_CPU_6338=y -CONFIG_BCM63XX_CPU_6345=y -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BCM63XX_CPU_6362=y -CONFIG_BCM63XX_CPU_6368=y -CONFIG_BCM63XX_EHCI=y -CONFIG_BCM63XX_ENET=y -CONFIG_BCM63XX_OHCI=y -CONFIG_BCM63XX_PHY=y -CONFIG_BCM63XX_WDT=y -CONFIG_BCMA=y -CONFIG_BCMA_BLOCKIO=y -# CONFIG_BCMA_DEBUG is not set -# CONFIG_BCMA_DRIVER_GMAC_CMN is not set -# CONFIG_BCMA_DRIVER_MIPS is not set -CONFIG_BCMA_DRIVER_PCI=y -# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set -CONFIG_BCMA_HOST_PCI=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -# CONFIG_BCMA_HOST_SOC is not set -CONFIG_BCM_NET_PHYLIB=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOARD_BCM63XX_DT=y -CONFIG_BOARD_BCM963XX=y -CONFIG_BOARD_LIVEBOX=y -CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_BMIPS=y -CONFIG_CPU_BMIPS32_3300=y -CONFIG_CPU_BMIPS4350=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_CPUFREQ=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CRASH_CORE=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_FIXED_PHY=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_BCM63XX=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_SYSFS=y -# CONFIG_GRO_CELLS is not set -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_BCM63XX=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_KEXEC=y -CONFIG_KEXEC_CORE=y -CONFIG_LEDS_BCM6328=y -CONFIG_LEDS_BCM6358=y -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -CONFIG_MIPS_EXTERNAL_TIMER=y -# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=4 -CONFIG_MIPS_L1_CACHE_SHIFT_4=y -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_BCM63XX_PARTS=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_STAA=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_PARSER_IMAGETAG=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -CONFIG_MTD_SPI_NOR=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -# CONFIG_NO_IOPORT_MAP is not set -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_PCI=y -# CONFIG_PCIEAER is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_BCM6318=y -CONFIG_PINCTRL_BCM63268=y -CONFIG_PINCTRL_BCM6328=y -CONFIG_PINCTRL_BCM6348=y -CONFIG_PINCTRL_BCM6358=y -CONFIG_PINCTRL_BCM6362=y -CONFIG_PINCTRL_BCM6368=y -CONFIG_PINCTRL_BCM63XX=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_RCU_NEED_SEGCBLIST is not set -# CONFIG_RCU_STALL_COMMON is not set -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RELAY=y -CONFIG_RTL8366_SMI=y -CONFIG_RTL8367_PHY=y -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_BCM63XX=y -CONFIG_SPI_BCM63XX_HSSPI=y -CONFIG_SPI_MASTER=y -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SRCU=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_BLOCKIO=y -# CONFIG_SSB_DRIVER_MIPS is not set -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SPROM=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_B53=y -CONFIG_SWCONFIG_B53_MMAP_DRIVER=y -CONFIG_SWCONFIG_B53_PHY_DRIVER=y -CONFIG_SWCONFIG_B53_PHY_FIXUP=y -CONFIG_SWCONFIG_B53_SPI_DRIVER=y -# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set -CONFIG_SWPHY=y -CONFIG_SYNC_R4K=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_BMIPS=y -CONFIG_SYS_HAS_CPU_BMIPS32_3300=y -CONFIG_SYS_HAS_CPU_BMIPS4350=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y -CONFIG_SYS_SUPPORTS_SMP=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TINY_SRCU=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_WEAK_ORDERING=y diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch deleted file mode 100644 index b6d755d29b..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch +++ /dev/null @@ -1,210 +0,0 @@ -From e74caf41aec5338b8cbbd0a1483650848f16f532 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 16 Jul 2017 12:23:47 +0200 -Subject: [PATCH V2 1/8] MIPS: BCM63XX: add clkdev lookup support - -Enable clkdev lookup support to allow us providing clocks under -different names to devices more easily, so we don't need to care -about clock name clashes anymore. - -Reviewed-by: Florian Fainelli -Signed-off-by: Jonas Gorski ---- - arch/mips/Kconfig | 1 + - arch/mips/bcm63xx/clk.c | 150 +++++++++++++++++++++++++++++++++++++----------- - 2 files changed, 116 insertions(+), 35 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -279,6 +279,7 @@ config BCM63XX - select GPIOLIB - select HAVE_CLK - select MIPS_L1_CACHE_SHIFT_4 -+ select CLKDEV_LOOKUP - help - Support for BCM63XX based boards - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -11,6 +11,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -359,44 +360,103 @@ long clk_round_rate(struct clk *clk, uns - } - EXPORT_SYMBOL_GPL(clk_round_rate); - --struct clk *clk_get(struct device *dev, const char *id) --{ -- if (!strcmp(id, "enet0")) -- return &clk_enet0; -- if (!strcmp(id, "enet1")) -- return &clk_enet1; -- if (!strcmp(id, "enetsw")) -- return &clk_enetsw; -- if (!strcmp(id, "ephy")) -- return &clk_ephy; -- if (!strcmp(id, "usbh")) -- return &clk_usbh; -- if (!strcmp(id, "usbd")) -- return &clk_usbd; -- if (!strcmp(id, "spi")) -- return &clk_spi; -- if (!strcmp(id, "hsspi")) -- return &clk_hsspi; -- if (!strcmp(id, "xtm")) -- return &clk_xtm; -- if (!strcmp(id, "periph")) -- return &clk_periph; -- if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm")) -- return &clk_pcm; -- if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec")) -- return &clk_ipsec; -- if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie")) -- return &clk_pcie; -- return ERR_PTR(-ENOENT); --} -- --EXPORT_SYMBOL(clk_get); -- --void clk_put(struct clk *clk) --{ --} -- --EXPORT_SYMBOL(clk_put); -+static struct clk_lookup bcm3368_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enet0", &clk_enet0), -+ CLKDEV_INIT(NULL, "enet1", &clk_enet1), -+ CLKDEV_INIT(NULL, "ephy", &clk_ephy), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "spi", &clk_spi), -+ CLKDEV_INIT(NULL, "pcm", &clk_pcm), -+}; -+ -+static struct clk_lookup bcm6328_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "hsspi", &clk_hsspi), -+ CLKDEV_INIT(NULL, "pcie", &clk_pcie), -+}; -+ -+static struct clk_lookup bcm6338_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enet0", &clk_enet0), -+ CLKDEV_INIT(NULL, "enet1", &clk_enet1), -+ CLKDEV_INIT(NULL, "ephy", &clk_ephy), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "spi", &clk_spi), -+}; -+ -+static struct clk_lookup bcm6345_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enet0", &clk_enet0), -+ CLKDEV_INIT(NULL, "enet1", &clk_enet1), -+ CLKDEV_INIT(NULL, "ephy", &clk_ephy), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "spi", &clk_spi), -+}; -+ -+static struct clk_lookup bcm6348_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enet0", &clk_enet0), -+ CLKDEV_INIT(NULL, "enet1", &clk_enet1), -+ CLKDEV_INIT(NULL, "ephy", &clk_ephy), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "spi", &clk_spi), -+}; -+ -+static struct clk_lookup bcm6358_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enet0", &clk_enet0), -+ CLKDEV_INIT(NULL, "enet1", &clk_enet1), -+ CLKDEV_INIT(NULL, "ephy", &clk_ephy), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "spi", &clk_spi), -+ CLKDEV_INIT(NULL, "pcm", &clk_pcm), -+}; -+ -+static struct clk_lookup bcm6362_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "spi", &clk_spi), -+ CLKDEV_INIT(NULL, "hsspi", &clk_hsspi), -+ CLKDEV_INIT(NULL, "pcie", &clk_pcie), -+ CLKDEV_INIT(NULL, "ipsec", &clk_ipsec), -+}; -+ -+static struct clk_lookup bcm6368_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "spi", &clk_spi), -+ CLKDEV_INIT(NULL, "xtm", &clk_xtm), -+ CLKDEV_INIT(NULL, "ipsec", &clk_ipsec), -+}; - - #define HSSPI_PLL_HZ_6328 133333333 - #define HSSPI_PLL_HZ_6362 400000000 -@@ -404,11 +464,31 @@ EXPORT_SYMBOL(clk_put); - static int __init bcm63xx_clk_init(void) - { - switch (bcm63xx_get_cpu_id()) { -+ case BCM3368_CPU_ID: -+ clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks)); -+ break; - case BCM6328_CPU_ID: - clk_hsspi.rate = HSSPI_PLL_HZ_6328; -+ clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks)); -+ break; -+ case BCM6338_CPU_ID: -+ clkdev_add_table(bcm6338_clks, ARRAY_SIZE(bcm6338_clks)); -+ break; -+ case BCM6345_CPU_ID: -+ clkdev_add_table(bcm6345_clks, ARRAY_SIZE(bcm6345_clks)); -+ break; -+ case BCM6348_CPU_ID: -+ clkdev_add_table(bcm6348_clks, ARRAY_SIZE(bcm6348_clks)); -+ break; -+ case BCM6358_CPU_ID: -+ clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks)); - break; - case BCM6362_CPU_ID: - clk_hsspi.rate = HSSPI_PLL_HZ_6362; -+ clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks)); -+ break; -+ case BCM6368_CPU_ID: -+ clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks)); - break; - } - diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch deleted file mode 100644 index 2be6f4c526..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch +++ /dev/null @@ -1,84 +0,0 @@ -From d0322bf7bebe87012b4f95c85be6b5ba0cb6f344 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 16 Jul 2017 12:31:44 +0200 -Subject: [PATCH V2 2/8] MIPS: BCM63XX: provide periph clock as refclk for uart - -Add a lookup as "refclk" to describe its function for the uarts. - -Reviewed-by: Florian Fainelli -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/clk.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -363,6 +363,8 @@ EXPORT_SYMBOL_GPL(clk_round_rate); - static struct clk_lookup bcm3368_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -376,6 +378,8 @@ static struct clk_lookup bcm3368_clks[] - static struct clk_lookup bcm6328_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -387,6 +391,7 @@ static struct clk_lookup bcm6328_clks[] - static struct clk_lookup bcm6338_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -399,6 +404,7 @@ static struct clk_lookup bcm6338_clks[] - static struct clk_lookup bcm6345_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -411,6 +417,7 @@ static struct clk_lookup bcm6345_clks[] - static struct clk_lookup bcm6348_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -423,6 +430,8 @@ static struct clk_lookup bcm6348_clks[] - static struct clk_lookup bcm6358_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -436,6 +445,8 @@ static struct clk_lookup bcm6358_clks[] - static struct clk_lookup bcm6362_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -449,6 +460,8 @@ static struct clk_lookup bcm6362_clks[] - static struct clk_lookup bcm6368_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch deleted file mode 100644 index 986732e0e3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-03-tty-bcm63xx_uart-use-refclk-for-the-expected-clock-n.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 8124706e6040b1cf0d2dd3a05759df6cec4bddfb Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 16 Jul 2017 12:32:37 +0200 -Subject: [PATCH V2 3/8] tty/bcm63xx_uart: use refclk for the expected clock - name - -We now have the clock available under refclk, so use that. - -Acked-by: Greg Kroah-Hartman -Reviewed-by: Florian Fainelli -Signed-off-by: Jonas Gorski ---- - drivers/tty/serial/bcm63xx_uart.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/tty/serial/bcm63xx_uart.c -+++ b/drivers/tty/serial/bcm63xx_uart.c -@@ -847,7 +847,7 @@ static int bcm_uart_probe(struct platfor - return -ENODEV; - - clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) : -- clk_get(&pdev->dev, "periph"); -+ clk_get(&pdev->dev, "refclk"); - if (IS_ERR(clk)) - return -ENODEV; - diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch deleted file mode 100644 index 2f82830ae1..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-04-tty-bcm63xx_uart-allow-naming-clock-in-device-tree.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 317f8659bba01b307cbe4e9902d4e3d333fd7164 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 16 Jul 2017 12:39:17 +0200 -Subject: [PATCH V2 4/8] tty/bcm63xx_uart: allow naming clock in device tree - -Codify using a named clock for the refclk of the uart. This makes it -easier if we might need to add a gating clock (like present on the -BCM6345). - -Acked-by: Rob Herring -Acked-by: Greg Kroah-Hartman -Reviewed-by: Florian Fainelli -Signed-off-by: Jonas Gorski ---- - Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt | 6 ++++++ - drivers/tty/serial/bcm63xx_uart.c | 6 ++++-- - 2 files changed, 10 insertions(+), 2 deletions(-) - ---- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt -+++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt -@@ -11,6 +11,11 @@ Required properties: - - clocks: Clock driving the hardware; used to figure out the baud rate - divisor. - -+ -+Optional properties: -+ -+- clock-names: Should be "refclk". -+ - Example: - - uart0: serial@14e00520 { -@@ -19,6 +24,7 @@ Example: - interrupt-parent = <&periph_intc>; - interrupts = <2>; - clocks = <&periph_clk>; -+ clock-names = "refclk"; - }; - - clocks { ---- a/drivers/tty/serial/bcm63xx_uart.c -+++ b/drivers/tty/serial/bcm63xx_uart.c -@@ -846,8 +846,10 @@ static int bcm_uart_probe(struct platfor - if (!res_irq) - return -ENODEV; - -- clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) : -- clk_get(&pdev->dev, "refclk"); -+ clk = clk_get(&pdev->dev, "refclk"); -+ if (IS_ERR(clk) && pdev->dev.of_node) -+ clk = of_clk_get(pdev->dev.of_node, 0); -+ - if (IS_ERR(clk)) - return -ENODEV; - diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch deleted file mode 100644 index a69998d66c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch +++ /dev/null @@ -1,62 +0,0 @@ -From cb86630379c8f3432c916d62045b5176f17f4123 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 16 Jul 2017 12:57:21 +0200 -Subject: [PATCH V2 6/8] MIPS: BCM63XX: move the HSSPI PLL HZ into its own - clock - -Split up the HSSPL clock into rate and a gate clock, to more closely -match the actual hardware. - -Reviewed-by: Florian Fainelli -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/clk.c | 10 ++++++++-- - 1 file changed, 8 insertions(+), 2 deletions(-) - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -248,6 +248,10 @@ static struct clk clk_hsspi = { - .set = hsspi_set, - }; - -+/* -+ * HSSPI PLL -+ */ -+static struct clk clk_hsspi_pll; - - /* - * XTM clock -@@ -380,6 +384,7 @@ static struct clk_lookup bcm6328_clks[] - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -447,6 +452,7 @@ static struct clk_lookup bcm6362_clks[] - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -481,7 +487,7 @@ static int __init bcm63xx_clk_init(void) - clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks)); - break; - case BCM6328_CPU_ID: -- clk_hsspi.rate = HSSPI_PLL_HZ_6328; -+ clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328; - clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks)); - break; - case BCM6338_CPU_ID: -@@ -497,7 +503,7 @@ static int __init bcm63xx_clk_init(void) - clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks)); - break; - case BCM6362_CPU_ID: -- clk_hsspi.rate = HSSPI_PLL_HZ_6362; -+ clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362; - clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks)); - break; - case BCM6368_CPU_ID: diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch deleted file mode 100644 index eb30b2daf5..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 6d43970a2eb1c7ee88caf7328d201f9c001262e9 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 16 Jul 2017 12:48:41 +0200 -Subject: [PATCH V2 7/8] MIPS: BCM63XX: provide enet clocks as "enet" to the - ethernet devices - -Add lookups to provide the appropriate enetX clocks as just "enet" to -the ethernet devices. - -Reviewed-by: Florian Fainelli -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/clk.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -377,6 +377,8 @@ static struct clk_lookup bcm3368_clks[] - CLKDEV_INIT(NULL, "usbd", &clk_usbd), - CLKDEV_INIT(NULL, "spi", &clk_spi), - CLKDEV_INIT(NULL, "pcm", &clk_pcm), -+ CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0), -+ CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1), - }; - - static struct clk_lookup bcm6328_clks[] = { -@@ -404,6 +406,7 @@ static struct clk_lookup bcm6338_clks[] - CLKDEV_INIT(NULL, "usbh", &clk_usbh), - CLKDEV_INIT(NULL, "usbd", &clk_usbd), - CLKDEV_INIT(NULL, "spi", &clk_spi), -+ CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc), - }; - - static struct clk_lookup bcm6345_clks[] = { -@@ -417,6 +420,7 @@ static struct clk_lookup bcm6345_clks[] - CLKDEV_INIT(NULL, "usbh", &clk_usbh), - CLKDEV_INIT(NULL, "usbd", &clk_usbd), - CLKDEV_INIT(NULL, "spi", &clk_spi), -+ CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc), - }; - - static struct clk_lookup bcm6348_clks[] = { -@@ -430,6 +434,8 @@ static struct clk_lookup bcm6348_clks[] - CLKDEV_INIT(NULL, "usbh", &clk_usbh), - CLKDEV_INIT(NULL, "usbd", &clk_usbd), - CLKDEV_INIT(NULL, "spi", &clk_spi), -+ CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc), -+ CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet_misc), - }; - - static struct clk_lookup bcm6358_clks[] = { -@@ -445,6 +451,8 @@ static struct clk_lookup bcm6358_clks[] - CLKDEV_INIT(NULL, "usbd", &clk_usbd), - CLKDEV_INIT(NULL, "spi", &clk_spi), - CLKDEV_INIT(NULL, "pcm", &clk_pcm), -+ CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0), -+ CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1), - }; - - static struct clk_lookup bcm6362_clks[] = { diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch deleted file mode 100644 index b5b36e51a4..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch +++ /dev/null @@ -1,105 +0,0 @@ -From b98027285bd1fa95da0645a4234a5fc1f1a83f92 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 26 Feb 2017 11:59:52 +0100 -Subject: [PATCH V2 8/8] MIPS: BCM63XX: split out swpkt_sar/usb clocks - -Make the secondary switch clocks their own clocks. This allows proper -enable reference counting between SAR/XTM and the main switch clocks, -and controlling them individually from drivers. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/clk.c | 61 +++++++++++++++++++++++++++++++++++++++++-------- - 1 file changed, 51 insertions(+), 10 deletions(-) - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -122,21 +122,56 @@ static struct clk clk_ephy = { - }; - - /* -+ * Ethernet switch SAR clock -+ */ -+static void swpkt_sar_set(struct clk *clk, int enable) -+{ -+ if (BCMCPU_IS_6368()) -+ bcm_hwclock_set(CKCTL_6368_SWPKT_SAR_EN, enable); -+ else -+ return; -+} -+ -+static struct clk clk_swpkt_sar = { -+ .set = swpkt_sar_set, -+}; -+ -+/* -+ * Ethernet switch USB clock -+ */ -+static void swpkt_usb_set(struct clk *clk, int enable) -+{ -+ if (BCMCPU_IS_6368()) -+ bcm_hwclock_set(CKCTL_6368_SWPKT_USB_EN, enable); -+ else -+ return; -+} -+ -+static struct clk clk_swpkt_usb = { -+ .set = swpkt_usb_set, -+}; -+ -+/* - * Ethernet switch clock - */ - static void enetsw_set(struct clk *clk, int enable) - { -- if (BCMCPU_IS_6328()) -+ if (BCMCPU_IS_6328()) { - bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable); -- else if (BCMCPU_IS_6362()) -+ } else if (BCMCPU_IS_6362()) { - bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable); -- else if (BCMCPU_IS_6368()) -- bcm_hwclock_set(CKCTL_6368_ROBOSW_EN | -- CKCTL_6368_SWPKT_USB_EN | -- CKCTL_6368_SWPKT_SAR_EN, -- enable); -- else -+ } else if (BCMCPU_IS_6368()) { -+ if (enable) { -+ clk_enable_unlocked(&clk_swpkt_sar); -+ clk_enable_unlocked(&clk_swpkt_usb); -+ } else { -+ clk_disable_unlocked(&clk_swpkt_usb); -+ clk_disable_unlocked(&clk_swpkt_sar); -+ } -+ bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable); -+ } else { - return; -+ } - - if (enable) { - /* reset switch core afer clock change */ -@@ -261,8 +296,12 @@ static void xtm_set(struct clk *clk, int - if (!BCMCPU_IS_6368()) - return; - -- bcm_hwclock_set(CKCTL_6368_SAR_EN | -- CKCTL_6368_SWPKT_SAR_EN, enable); -+ if (enable) -+ clk_enable_unlocked(&clk_swpkt_sar); -+ else -+ clk_disable_unlocked(&clk_swpkt_sar); -+ -+ bcm_hwclock_set(CKCTL_6368_SAR_EN, enable); - - if (enable) { - /* reset sar core afer clock change */ -@@ -451,6 +490,8 @@ static struct clk_lookup bcm6358_clks[] - CLKDEV_INIT(NULL, "usbd", &clk_usbd), - CLKDEV_INIT(NULL, "spi", &clk_spi), - CLKDEV_INIT(NULL, "pcm", &clk_pcm), -+ CLKDEV_INIT(NULL, "swpkt_sar", &clk_swpkt_sar), -+ CLKDEV_INIT(NULL, "swpkt_usb", &clk_swpkt_usb), - CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0), - CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1), - }; diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch deleted file mode 100644 index b339580c48..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-10-bcm63xx_enet-do-not-rely-on-probe-order.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 71710bb6cbc82f411a4e5faafa0c3178e48e7137 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 30 May 2017 13:31:45 +0200 -Subject: [PATCH 3/6] bcm63xx_enet: do not rely on probe order - -Do not rely on the shared device being probed before the enet(sw) -devices. This makes it easier to eventually move out the shared -device as a dma controller driver (what it should be). - -Signed-off-by: Jonas Gorski ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 ++------- - 1 file changed, 2 insertions(+), 7 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1723,10 +1723,8 @@ static int bcm_enet_probe(struct platfor - const char *clk_name; - int i, ret; - -- /* stop if shared driver failed, assume driver->probe will be -- * called in the same order we register devices (correct ?) */ - if (!bcm_enet_shared_base[0]) -- return -ENODEV; -+ return -EPROBE_DEFER; - - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1); -@@ -2701,11 +2699,8 @@ static int bcm_enetsw_probe(struct platf - struct resource *res_mem; - int ret, irq_rx, irq_tx; - -- /* stop if shared driver failed, assume driver->probe will be -- * called in the same order we register devices (correct ?) -- */ - if (!bcm_enet_shared_base[0]) -- return -ENODEV; -+ return -EPROBE_DEFER; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irq_rx = platform_get_irq(pdev, 0); diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch deleted file mode 100644 index cf0971c911..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-11-bcm63xx_enet-use-managed-functions-for-clock-ioremap.patch +++ /dev/null @@ -1,150 +0,0 @@ -From 179a445ae4ef36ec44f4aea18e5f42d21334d186 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 25 Feb 2017 12:39:25 +0100 -Subject: [PATCH 4/6] bcm63xx_enet: use managed functions for clock/ioremap - -Use managed functions where possible to reduce the amount of resource -handling on error and remove paths. - -Signed-off-by: Jonas Gorski ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 54 +++++++--------------------- - 1 file changed, 12 insertions(+), 42 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1768,14 +1768,14 @@ static int bcm_enet_probe(struct platfor - clk_name = "enet1"; - } - -- priv->mac_clk = clk_get(&pdev->dev, clk_name); -+ priv->mac_clk = devm_clk_get(&pdev->dev, clk_name); - if (IS_ERR(priv->mac_clk)) { - ret = PTR_ERR(priv->mac_clk); - goto out; - } - ret = clk_prepare_enable(priv->mac_clk); - if (ret) -- goto out_put_clk_mac; -+ goto out; - - /* initialize default and fetch platform data */ - priv->rx_ring_size = BCMENET_DEF_RX_DESC; -@@ -1803,7 +1803,7 @@ static int bcm_enet_probe(struct platfor - - if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) { - /* using internal PHY, enable clock */ -- priv->phy_clk = clk_get(&pdev->dev, "ephy"); -+ priv->phy_clk = devm_clk_get(&pdev->dev, "ephy"); - if (IS_ERR(priv->phy_clk)) { - ret = PTR_ERR(priv->phy_clk); - priv->phy_clk = NULL; -@@ -1811,7 +1811,7 @@ static int bcm_enet_probe(struct platfor - } - ret = clk_prepare_enable(priv->phy_clk); - if (ret) -- goto out_put_clk_phy; -+ goto out_disable_clk_mac; - } - - /* do minimal hardware init to be able to probe mii bus */ -@@ -1908,14 +1908,8 @@ out_uninit_hw: - if (priv->phy_clk) - clk_disable_unprepare(priv->phy_clk); - --out_put_clk_phy: -- if (priv->phy_clk) -- clk_put(priv->phy_clk); -- - out_disable_clk_mac: - clk_disable_unprepare(priv->mac_clk); --out_put_clk_mac: -- clk_put(priv->mac_clk); - out: - free_netdev(dev); - return ret; -@@ -1951,12 +1945,10 @@ static int bcm_enet_remove(struct platfo - } - - /* disable hw block clocks */ -- if (priv->phy_clk) { -+ if (priv->phy_clk) - clk_disable_unprepare(priv->phy_clk); -- clk_put(priv->phy_clk); -- } -+ - clk_disable_unprepare(priv->mac_clk); -- clk_put(priv->mac_clk); - - free_netdev(dev); - return 0; -@@ -2739,26 +2731,20 @@ static int bcm_enetsw_probe(struct platf - if (ret) - goto out; - -- if (!request_mem_region(res_mem->start, resource_size(res_mem), -- "bcm63xx_enetsw")) { -- ret = -EBUSY; -+ priv->base = devm_ioremap_resource(&pdev->dev, res_mem); -+ if (IS_ERR(priv->base)) { -+ ret = PTR_ERR(priv->base); - goto out; - } - -- priv->base = ioremap(res_mem->start, resource_size(res_mem)); -- if (priv->base == NULL) { -- ret = -ENOMEM; -- goto out_release_mem; -- } -- -- priv->mac_clk = clk_get(&pdev->dev, "enetsw"); -+ priv->mac_clk = devm_clk_get(&pdev->dev, "enetsw"); - if (IS_ERR(priv->mac_clk)) { - ret = PTR_ERR(priv->mac_clk); -- goto out_unmap; -+ goto out; - } - ret = clk_prepare_enable(priv->mac_clk); - if (ret) -- goto out_put_clk; -+ goto out; - - priv->rx_chan = 0; - priv->tx_chan = 1; -@@ -2790,15 +2776,6 @@ static int bcm_enetsw_probe(struct platf - - out_disable_clk: - clk_disable_unprepare(priv->mac_clk); -- --out_put_clk: -- clk_put(priv->mac_clk); -- --out_unmap: -- iounmap(priv->base); -- --out_release_mem: -- release_mem_region(res_mem->start, resource_size(res_mem)); - out: - free_netdev(dev); - return ret; -@@ -2810,20 +2787,13 @@ static int bcm_enetsw_remove(struct plat - { - struct bcm_enet_priv *priv; - struct net_device *dev; -- struct resource *res; - - /* stop netdevice */ - dev = platform_get_drvdata(pdev); - priv = netdev_priv(dev); - unregister_netdev(dev); - -- /* release device resources */ -- iounmap(priv->base); -- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- release_mem_region(res->start, resource_size(res)); -- - clk_disable_unprepare(priv->mac_clk); -- clk_put(priv->mac_clk); - - free_netdev(dev); - return 0; diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch deleted file mode 100644 index 34fdd5c41e..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-12-bcm63xx_enet-drop-unneeded-NULL-phy_clk-check.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 555baec974ede81e616ca88ac6d3fca09239368f Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 18 Jul 2017 13:18:01 +0200 -Subject: [PATCH 5/6] bcm63xx_enet: drop unneeded NULL phy_clk check - -clk_disable and clk_unprepare are NULL-safe, so need to duplicate the -NULL check of the functions. - -Signed-off-by: Jonas Gorski ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1905,8 +1905,7 @@ out_free_mdio: - out_uninit_hw: - /* turn off mdc clock */ - enet_writel(priv, 0, ENET_MIISC_REG); -- if (priv->phy_clk) -- clk_disable_unprepare(priv->phy_clk); -+ clk_disable_unprepare(priv->phy_clk); - - out_disable_clk_mac: - clk_disable_unprepare(priv->mac_clk); -@@ -1945,9 +1944,7 @@ static int bcm_enet_remove(struct platfo - } - - /* disable hw block clocks */ -- if (priv->phy_clk) -- clk_disable_unprepare(priv->phy_clk); -- -+ clk_disable_unprepare(priv->phy_clk); - clk_disable_unprepare(priv->mac_clk); - - free_netdev(dev); diff --git a/target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch b/target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch deleted file mode 100644 index 41a6b57f5b..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.15-13-bcm63xx_enet-remove-unneeded-include.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 77364ce98037972fb1c57d0ee0418eb1c2b26521 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Mon, 29 May 2017 13:11:14 +0200 -Subject: [PATCH 6/6] bcm63xx_enet: remove unneeded include - -We don't use anyhing from that file, so drop it. - -Signed-off-by: Jonas Gorski ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.h | 1 - - 1 file changed, 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h -@@ -9,7 +9,6 @@ - #include - - #include --#include - #include - #include - diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch deleted file mode 100644 index c489001332..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.16-01-bcm63xx_enet-just-use-enet-as-the-clock-name.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 943b0832e0cf3afe5bd40ffb1885d06106122c5d Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 16 Jul 2017 12:49:49 +0200 -Subject: [PATCH 1/4] bcm63xx_enet: just use "enet" as the clock name - -Now that we have the individual clocks available as "enet" we -don't need to rely on the device id for them anymore. - -Signed-off-by: Jonas Gorski ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 5 +---- - 1 file changed, 1 insertion(+), 4 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1720,7 +1720,6 @@ static int bcm_enet_probe(struct platfor - struct bcm63xx_enet_platform_data *pd; - struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx; - struct mii_bus *bus; -- const char *clk_name; - int i, ret; - - if (!bcm_enet_shared_base[0]) -@@ -1761,14 +1760,12 @@ static int bcm_enet_probe(struct platfor - if (priv->mac_id == 0) { - priv->rx_chan = 0; - priv->tx_chan = 1; -- clk_name = "enet0"; - } else { - priv->rx_chan = 2; - priv->tx_chan = 3; -- clk_name = "enet1"; - } - -- priv->mac_clk = devm_clk_get(&pdev->dev, clk_name); -+ priv->mac_clk = devm_clk_get(&pdev->dev, "enet"); - if (IS_ERR(priv->mac_clk)) { - ret = PTR_ERR(priv->mac_clk); - goto out; diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch deleted file mode 100644 index f3ddd7445c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.16-02-bcm63xx_enet-use-platform-data-for-dma-channel-numbe.patch +++ /dev/null @@ -1,72 +0,0 @@ -From b7d1d1f345bb3b25c360c1df812d98866e2ee7fb Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 30 Sep 2017 13:50:03 +0200 -Subject: [PATCH 2/4] bcm63xx_enet: use platform data for dma channel numbers - -To reduce the reliance on device ids, pass the dma channel numbers to -the enet devices as platform data. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/dev-enet.c | 8 ++++++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 4 ++++ - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 11 ++--------- - 3 files changed, 14 insertions(+), 9 deletions(-) - ---- a/arch/mips/bcm63xx/dev-enet.c -+++ b/arch/mips/bcm63xx/dev-enet.c -@@ -265,6 +265,14 @@ int __init bcm63xx_enet_register(int uni - dpd->dma_chan_width = ENETDMA_CHAN_WIDTH; - } - -+ if (unit == 0) { -+ dpd->rx_chan = 0; -+ dpd->tx_chan = 1; -+ } else { -+ dpd->rx_chan = 2; -+ dpd->tx_chan = 3; -+ } -+ - ret = platform_device_register(pdev); - if (ret) - return ret; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h -@@ -55,6 +55,10 @@ struct bcm63xx_enet_platform_data { - - /* DMA descriptor shift */ - unsigned int dma_desc_shift; -+ -+ /* dma channel ids */ -+ int rx_chan; -+ int tx_chan; - }; - - /* ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1756,15 +1756,6 @@ static int bcm_enet_probe(struct platfor - priv->irq_tx = res_irq_tx->start; - priv->mac_id = pdev->id; - -- /* get rx & tx dma channel id for this mac */ -- if (priv->mac_id == 0) { -- priv->rx_chan = 0; -- priv->tx_chan = 1; -- } else { -- priv->rx_chan = 2; -- priv->tx_chan = 3; -- } -- - priv->mac_clk = devm_clk_get(&pdev->dev, "enet"); - if (IS_ERR(priv->mac_clk)) { - ret = PTR_ERR(priv->mac_clk); -@@ -1796,6 +1787,8 @@ static int bcm_enet_probe(struct platfor - priv->dma_chan_width = pd->dma_chan_width; - priv->dma_has_sram = pd->dma_has_sram; - priv->dma_desc_shift = pd->dma_desc_shift; -+ priv->rx_chan = pd->rx_chan; -+ priv->tx_chan = pd->tx_chan; - } - - if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) { diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch deleted file mode 100644 index a656e4f0ab..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.16-03-bcm63xx_enet-remove-pointless-mac_id-check.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 8c61608e5dd2e15575c171ee9cd558ddc3b94962 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 17 Dec 2017 12:54:30 +0100 -Subject: [PATCH 3/4] bcm63xx_enet: remove pointless mac_id check - -Enabling the ephy clock for mac 1 is harmless, and the actual usage of -the ephy is not restricted to mac 0, so we might as well remove the -check. - -Signed-off-by: Jonas Gorski ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1791,7 +1791,7 @@ static int bcm_enet_probe(struct platfor - priv->tx_chan = pd->tx_chan; - } - -- if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) { -+ if (priv->has_phy && !priv->use_external_mii) { - /* using internal PHY, enable clock */ - priv->phy_clk = devm_clk_get(&pdev->dev, "ephy"); - if (IS_ERR(priv->phy_clk)) { diff --git a/target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch b/target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch deleted file mode 100644 index cab9e5a37a..0000000000 --- a/target/linux/bcm63xx/patches-4.14/001-4.16-04-bcm63xx_enet-use-platform-device-id-directly-for-mii.patch +++ /dev/null @@ -1,46 +0,0 @@ -From faea89cd893a1a7af81185f026a64dad603ef72f Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 17 Dec 2017 12:58:12 +0100 -Subject: [PATCH 4/4] bcm63xx_enet: use platform device id directly for miibus - name - -Directly use the platform device for generating the miibus name. This removes -the last user of bcm_enet_priv::mac_id and we can remove the field. - -Signed-off-by: Jonas Gorski ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 3 +-- - drivers/net/ethernet/broadcom/bcm63xx_enet.h | 3 --- - 2 files changed, 1 insertion(+), 5 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1754,7 +1754,6 @@ static int bcm_enet_probe(struct platfor - dev->irq = priv->irq = res_irq->start; - priv->irq_rx = res_irq_rx->start; - priv->irq_tx = res_irq_tx->start; -- priv->mac_id = pdev->id; - - priv->mac_clk = devm_clk_get(&pdev->dev, "enet"); - if (IS_ERR(priv->mac_clk)) { -@@ -1822,7 +1821,7 @@ static int bcm_enet_probe(struct platfor - bus->priv = priv; - bus->read = bcm_enet_mdio_read_phylib; - bus->write = bcm_enet_mdio_write_phylib; -- sprintf(bus->id, "%s-%d", pdev->name, priv->mac_id); -+ sprintf(bus->id, "%s-%d", pdev->name, pdev->id); - - /* only probe bus where we think the PHY is, because - * the mdio read operation return 0 instead of 0xffff ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h -@@ -193,9 +193,6 @@ struct bcm_enet_mib_counters { - - struct bcm_enet_priv { - -- /* mac id (from platform device id) */ -- int mac_id; -- - /* base remapped address of device */ - void __iomem *base; - diff --git a/target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch deleted file mode 100644 index 3974b9bd30..0000000000 --- a/target/linux/bcm63xx/patches-4.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:19 +0100 -Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay - -Knowledge of the clock setup delay should remain at the clock level (so -it can be clock specific and CPU specific). Add the 100 milliseconds -required clock delay for the USB host clock when it gets enabled. - -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/clk.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -214,6 +214,11 @@ static void usbh_set(struct clk *clk, in - bcm_hwclock_set(CKCTL_6362_USBH_EN, enable); - else if (BCMCPU_IS_6368()) - bcm_hwclock_set(CKCTL_6368_USBH_EN, enable); -+ else -+ return; -+ -+ if (enable) -+ msleep(100); - } - - static struct clk clk_usbh = { diff --git a/target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch deleted file mode 100644 index a9651d0897..0000000000 --- a/target/linux/bcm63xx/patches-4.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:20 +0100 -Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to - clock code - -This patch adds the required 10 micro seconds delay to the USB device -clock enable operation. Put this where the correct clock knowledege is, -which is in the clock code, and remove this delay from the bcm63xx_udc -gadget driver where it was before. - -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/clk.c | 5 +++++ - drivers/usb/gadget/bcm63xx_udc.c | 1 - - 2 files changed, 5 insertions(+), 1 deletion(-) - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -236,6 +236,11 @@ static void usbd_set(struct clk *clk, in - bcm_hwclock_set(CKCTL_6362_USBD_EN, enable); - else if (BCMCPU_IS_6368()) - bcm_hwclock_set(CKCTL_6368_USBD_EN, enable); -+ else -+ return; -+ -+ if (enable) -+ udelay(10); - } - - static struct clk clk_usbd = { ---- a/drivers/usb/gadget/udc/bcm63xx_udc.c -+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c -@@ -410,7 +410,6 @@ static inline void set_clocks(struct bcm - if (is_enabled) { - clk_enable(udc->usbh_clk); - clk_enable(udc->usbd_clk); -- udelay(10); - } else { - clk_disable(udc->usbd_clk); - clk_disable(udc->usbh_clk); diff --git a/target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch deleted file mode 100644 index 7ccb64c610..0000000000 --- a/target/linux/bcm63xx/patches-4.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch +++ /dev/null @@ -1,151 +0,0 @@ -From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:21 +0100 -Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private - register - -This patch moves the code touching the USB private register in the -bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in -preparation for adding support for OHCI and EHCI host controllers which -will also touch the USB private register. - -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/Makefile | 2 +- - arch/mips/bcm63xx/usb-common.c | 53 ++++++++++++++++++++ - .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h | 9 ++++ - drivers/usb/gadget/bcm63xx_udc.c | 27 ++-------- - 4 files changed, 67 insertions(+), 24 deletions(-) - create mode 100644 arch/mips/bcm63xx/usb-common.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h - ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -2,7 +2,7 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \ - setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ - dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \ -- dev-usb-usbd.o -+ dev-usb-usbd.o usb-common.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- /dev/null -+++ b/arch/mips/bcm63xx/usb-common.c -@@ -0,0 +1,53 @@ -+/* -+ * Broadcom BCM63xx common USB device configuration code -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2012 Kevin Cernekee -+ * Copyright (C) 2012 Broadcom Corporation -+ * -+ */ -+#include -+ -+#include -+#include -+#include -+#include -+ -+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device) -+{ -+ u32 val; -+ -+ val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); -+ if (is_device) { -+ val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); -+ val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); -+ } else { -+ val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); -+ val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); -+ } -+ bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); -+ -+ val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); -+ if (is_device) -+ val |= USBH_PRIV_SWAP_USBD_MASK; -+ else -+ val &= ~USBH_PRIV_SWAP_USBD_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG); -+} -+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode); -+ -+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on) -+{ -+ u32 val; -+ -+ val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); -+ if (is_on) -+ val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); -+ else -+ val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); -+ bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); -+} -+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup); ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h -@@ -0,0 +1,9 @@ -+#ifndef BCM63XX_USB_PRIV_H_ -+#define BCM63XX_USB_PRIV_H_ -+ -+#include -+ -+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device); -+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on); -+ -+#endif /* BCM63XX_USB_PRIV_H_ */ ---- a/drivers/usb/gadget/udc/bcm63xx_udc.c -+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c -@@ -39,6 +39,7 @@ - #include - #include - #include -+#include - - #define DRV_MODULE_NAME "bcm63xx_udc" - -@@ -887,22 +888,7 @@ static void bcm63xx_select_phy_mode(stru - bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG); - } - -- val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); -- if (is_device) { -- val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); -- val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); -- } else { -- val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT); -- val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); -- } -- bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); -- -- val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); -- if (is_device) -- val |= USBH_PRIV_SWAP_USBD_MASK; -- else -- val &= ~USBH_PRIV_SWAP_USBD_MASK; -- bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG); -+ bcm63xx_usb_priv_select_phy_mode(portmask, is_device); - } - - /** -@@ -916,14 +902,9 @@ static void bcm63xx_select_phy_mode(stru - */ - static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on) - { -- u32 val, portmask = BIT(udc->pd->port_no); -+ u32 portmask = BIT(udc->pd->port_no); - -- val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); -- if (is_on) -- val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); -- else -- val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); -- bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); -+ bcm63xx_usb_priv_select_pullup(portmask, is_on); - } - - /** diff --git a/target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch deleted file mode 100644 index 40bbe083a7..0000000000 --- a/target/linux/bcm63xx/patches-4.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch +++ /dev/null @@ -1,169 +0,0 @@ -From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:22 +0100 -Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to - common USB code - -This patch updates the common USB code touching the USB private -registers with the specific bits to properly enable OHCI and EHCI -controllers on BCM63xx SoCs. As a result we now need to protect access -to Read Modify Write sequences using a spinlock because we cannot -guarantee that any of the exposed helper will not be called -concurrently. - -Signed-off-by: Maxime Bizon -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/usb-common.c | 97 ++++++++++++++++++++ - .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h | 2 + - 2 files changed, 99 insertions(+) - ---- a/arch/mips/bcm63xx/usb-common.c -+++ b/arch/mips/bcm63xx/usb-common.c -@@ -5,10 +5,12 @@ - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * -+ * Copyright (C) 2008 Maxime Bizon - * Copyright (C) 2012 Kevin Cernekee - * Copyright (C) 2012 Broadcom Corporation - * - */ -+#include - #include - - #include -@@ -16,9 +18,14 @@ - #include - #include - -+static DEFINE_SPINLOCK(usb_priv_reg_lock); -+ - void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device) - { - u32 val; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&usb_priv_reg_lock, flags); - - val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); - if (is_device) { -@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3 - else - val &= ~USBH_PRIV_SWAP_USBD_MASK; - bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG); -+ -+ spin_unlock_irqrestore(&usb_priv_reg_lock, flags); - } - EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode); - - void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on) - { - u32 val; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&usb_priv_reg_lock, flags); - - val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG); - if (is_on) -@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32 - else - val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT); - bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG); -+ -+ spin_unlock_irqrestore(&usb_priv_reg_lock, flags); - } - EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup); -+ -+/* The following array represents the meaning of the DESC/DATA -+ * endian swapping with respect to the CPU configured endianness -+ * -+ * DATA ENDN mmio descriptor -+ * 0 0 BE invalid -+ * 0 1 BE LE -+ * 1 0 BE BE -+ * 1 1 BE invalid -+ * -+ * Since BCM63XX SoCs are configured to be in big-endian mode -+ * we want configuration at line 3. -+ */ -+void bcm63xx_usb_priv_ohci_cfg_set(void) -+{ -+ u32 reg; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&usb_priv_reg_lock, flags); -+ -+ if (BCMCPU_IS_6348()) -+ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG); -+ else if (BCMCPU_IS_6358()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG); -+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG); -+ /* -+ * The magic value comes for the original vendor BSP -+ * and is needed for USB to work. Datasheet does not -+ * help, so the magic value is used as-is. -+ */ -+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, -+ USBH_PRIV_TEST_6358_REG); -+ -+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); -+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG); -+ reg |= USBH_PRIV_SETUP_IOC_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG); -+ } -+ -+ spin_unlock_irqrestore(&usb_priv_reg_lock, flags); -+} -+ -+void bcm63xx_usb_priv_ehci_cfg_set(void) -+{ -+ u32 reg; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&usb_priv_reg_lock, flags); -+ -+ if (BCMCPU_IS_6358()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG); -+ reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG); -+ -+ /* -+ * The magic value comes for the original vendor BSP -+ * and is needed for USB to work. Datasheet does not -+ * help, so the magic value is used as-is. -+ */ -+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, -+ USBH_PRIV_TEST_6358_REG); -+ -+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); -+ reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG); -+ reg |= USBH_PRIV_SETUP_IOC_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG); -+ } -+ -+ spin_unlock_irqrestore(&usb_priv_reg_lock, flags); -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h -@@ -5,5 +5,7 @@ - - void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device); - void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on); -+void bcm63xx_usb_priv_ohci_cfg_set(void); -+void bcm63xx_usb_priv_ehci_cfg_set(void); - - #endif /* BCM63XX_USB_PRIV_H_ */ diff --git a/target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch deleted file mode 100644 index 64ea4731a1..0000000000 --- a/target/linux/bcm63xx/patches-4.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:23 +0100 -Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration - symbol - -This configuration symbol can be used by CPUs supporting the on-chip -OHCI controller, and ensures that all relevant OHCI-related -configuration options are correctly selected. So far, OHCI support is -available for the 6328, 6348, 6358 and 6358 SoCs. - -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/Kconfig | 15 ++++++++++----- - 1 file changed, 10 insertions(+), 5 deletions(-) - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -7,10 +7,17 @@ config BCM63XX_CPU_3368 - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI - -+config BCM63XX_OHCI -+ bool -+ select USB_ARCH_HAS_OHCI -+ select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD -+ select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD -+ - config BCM63XX_CPU_6328 - bool "support 6328 CPU" - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI -+ select BCM63XX_OHCI - - config BCM63XX_CPU_6338 - bool "support 6338 CPU" -@@ -25,21 +32,25 @@ config BCM63XX_CPU_6348 - bool "support 6348 CPU" - select SYS_HAS_CPU_BMIPS32_3300 - select HW_HAS_PCI -+ select BCM63XX_OHCI - - config BCM63XX_CPU_6358 - bool "support 6358 CPU" - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI -+ select BCM63XX_OHCI - - config BCM63XX_CPU_6362 - bool "support 6362 CPU" - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI -+ select BCM63XX_OHCI - - config BCM63XX_CPU_6368 - bool "support 6368 CPU" - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI -+ select BCM63XX_OHCI - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch deleted file mode 100644 index 8a532fe5d4..0000000000 --- a/target/linux/bcm63xx/patches-4.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch +++ /dev/null @@ -1,138 +0,0 @@ -From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:24 +0100 -Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI - controller - -Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be -driven by the ohci-platform generic driver by using specific power -on/off/suspend callback to manage clocks and hardware specific -configuration. - -Signed-off-by: Maxime Bizon -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/Makefile | 2 +- - arch/mips/bcm63xx/dev-usb-ohci.c | 94 ++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 ++ - 3 files changed, 101 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h - ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -2,7 +2,7 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \ - setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ - dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \ -- dev-usb-usbd.o usb-common.o -+ dev-usb-ohci.o dev-usb-usbd.o usb-common.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-ohci.c -@@ -0,0 +1,94 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Maxime Bizon -+ * Copyright (C) 2013 Florian Fainelli -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+static struct resource ohci_resources[] = { -+ { -+ .start = -1, /* filled at runtime */ -+ .end = -1, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = -1, /* filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ohci_dmamask = DMA_BIT_MASK(32); -+ -+static struct clk *usb_host_clock; -+ -+static int bcm63xx_ohci_power_on(struct platform_device *pdev) -+{ -+ usb_host_clock = clk_get(&pdev->dev, "usbh"); -+ if (IS_ERR_OR_NULL(usb_host_clock)) -+ return -ENODEV; -+ -+ clk_prepare_enable(usb_host_clock); -+ -+ bcm63xx_usb_priv_ohci_cfg_set(); -+ -+ return 0; -+} -+ -+static void bcm63xx_ohci_power_off(struct platform_device *pdev) -+{ -+ if (!IS_ERR_OR_NULL(usb_host_clock)) { -+ clk_disable_unprepare(usb_host_clock); -+ clk_put(usb_host_clock); -+ } -+} -+ -+static struct usb_ohci_pdata bcm63xx_ohci_pdata = { -+ .big_endian_desc = 1, -+ .big_endian_mmio = 1, -+ .no_big_frame_no = 1, -+ .num_ports = 1, -+ .power_on = bcm63xx_ohci_power_on, -+ .power_off = bcm63xx_ohci_power_off, -+ .power_suspend = bcm63xx_ohci_power_off, -+}; -+ -+static struct platform_device bcm63xx_ohci_device = { -+ .name = "ohci-platform", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(ohci_resources), -+ .resource = ohci_resources, -+ .dev = { -+ .platform_data = &bcm63xx_ohci_pdata, -+ .dma_mask = &ohci_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+}; -+ -+int __init bcm63xx_ohci_register(void) -+{ -+ if (BCMCPU_IS_6345() || BCMCPU_IS_6338()) -+ return -ENODEV; -+ -+ ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0); -+ ohci_resources[0].end = ohci_resources[0].start; -+ ohci_resources[0].end += RSET_OHCI_SIZE - 1; -+ ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0); -+ -+ return platform_device_register(&bcm63xx_ohci_device); -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_OHCI_H_ -+#define BCM63XX_DEV_USB_OHCI_H_ -+ -+int bcm63xx_ohci_register(void); -+ -+#endif /* BCM63XX_DEV_USB_OHCI_H_ */ diff --git a/target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch deleted file mode 100644 index 6fc5551884..0000000000 --- a/target/linux/bcm63xx/patches-4.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:25 +0100 -Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board - enables it - -BCM63XX-based boards can control the registration of the OHCI controller -by setting their has_ohci0 flag to 1. Handle this in the generic -code dealing with board registration and call the actual helper to -register the OHCI controller. - -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -27,6 +27,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -881,6 +882,9 @@ int __init board_register_devices(void) - if (board.has_usbd) - bcm63xx_usbd_register(&board.usbd); - -+ if (board.has_ohci0) -+ bcm63xx_ohci_register(); -+ - /* Generate MAC address for WLAN and register our SPROM, - * do this after registering enet devices - */ diff --git a/target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch deleted file mode 100644 index f7311a8f83..0000000000 --- a/target/linux/bcm63xx/patches-4.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:26 +0100 -Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration - symbol - -This configuration symbol can be used by CPUs supporting the on-chip -EHCI controller, and ensures that all relevant EHCI-related -configuration options are selected. So far BCM6328, BCM6358 and BCM6368 -have an EHCI controller and do select this symbol. Update -drivers/usb/host/Kconfig with BCM63XX to update direct unmet -dependencies. - -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/Kconfig | 9 +++++++++ - drivers/usb/host/Kconfig | 5 +++-- - 2 files changed, 12 insertions(+), 2 deletions(-) - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -13,11 +13,18 @@ config BCM63XX_OHCI - select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD - select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD - -+config BCM63XX_EHCI -+ bool -+ select USB_ARCH_HAS_EHCI -+ select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD -+ select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD -+ - config BCM63XX_CPU_6328 - bool "support 6328 CPU" - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI - select BCM63XX_OHCI -+ select BCM63XX_EHCI - - config BCM63XX_CPU_6338 - bool "support 6338 CPU" -@@ -39,18 +46,21 @@ config BCM63XX_CPU_6358 - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI - select BCM63XX_OHCI -+ select BCM63XX_EHCI - - config BCM63XX_CPU_6362 - bool "support 6362 CPU" - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI - select BCM63XX_OHCI -+ select BCM63XX_EHCI - - config BCM63XX_CPU_6368 - bool "support 6368 CPU" - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI - select BCM63XX_OHCI -+ select BCM63XX_EHCI - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch deleted file mode 100644 index 7d0a35c622..0000000000 --- a/target/linux/bcm63xx/patches-4.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch +++ /dev/null @@ -1,136 +0,0 @@ -From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:27 +0100 -Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI - controller - -Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be -driven by the generic ehci-platform driver by using specific power -on/off/suspend callbacks to manage clocks and hardware specific -configuration. - -Signed-off-by: Maxime Bizon -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/Makefile | 2 +- - arch/mips/bcm63xx/dev-usb-ehci.c | 92 ++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 ++ - 3 files changed, 99 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h - ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -2,7 +2,7 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \ - setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ - dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \ -- dev-usb-ohci.o dev-usb-usbd.o usb-common.o -+ dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- /dev/null -+++ b/arch/mips/bcm63xx/dev-usb-ehci.c -@@ -0,0 +1,92 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Maxime Bizon -+ * Copyright (C) 2013 Florian Fainelli -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+static struct resource ehci_resources[] = { -+ { -+ .start = -1, /* filled at runtime */ -+ .end = -1, /* filled at runtime */ -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .start = -1, /* filled at runtime */ -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ehci_dmamask = DMA_BIT_MASK(32); -+ -+static struct clk *usb_host_clock; -+ -+static int bcm63xx_ehci_power_on(struct platform_device *pdev) -+{ -+ usb_host_clock = clk_get(&pdev->dev, "usbh"); -+ if (IS_ERR_OR_NULL(usb_host_clock)) -+ return -ENODEV; -+ -+ clk_prepare_enable(usb_host_clock); -+ -+ bcm63xx_usb_priv_ehci_cfg_set(); -+ -+ return 0; -+} -+ -+static void bcm63xx_ehci_power_off(struct platform_device *pdev) -+{ -+ if (!IS_ERR_OR_NULL(usb_host_clock)) { -+ clk_disable_unprepare(usb_host_clock); -+ clk_put(usb_host_clock); -+ } -+} -+ -+static struct usb_ehci_pdata bcm63xx_ehci_pdata = { -+ .big_endian_desc = 1, -+ .big_endian_mmio = 1, -+ .power_on = bcm63xx_ehci_power_on, -+ .power_off = bcm63xx_ehci_power_off, -+ .power_suspend = bcm63xx_ehci_power_off, -+}; -+ -+static struct platform_device bcm63xx_ehci_device = { -+ .name = "ehci-platform", -+ .id = -1, -+ .num_resources = ARRAY_SIZE(ehci_resources), -+ .resource = ehci_resources, -+ .dev = { -+ .platform_data = &bcm63xx_ehci_pdata, -+ .dma_mask = &ehci_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+}; -+ -+int __init bcm63xx_ehci_register(void) -+{ -+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368()) -+ return 0; -+ -+ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); -+ ehci_resources[0].end = ehci_resources[0].start; -+ ehci_resources[0].end += RSET_EHCI_SIZE - 1; -+ ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0); -+ -+ return platform_device_register(&bcm63xx_ehci_device); -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h -@@ -0,0 +1,6 @@ -+#ifndef BCM63XX_DEV_USB_EHCI_H_ -+#define BCM63XX_DEV_USB_EHCI_H_ -+ -+int bcm63xx_ehci_register(void); -+ -+#endif /* BCM63XX_DEV_USB_EHCI_H_ */ diff --git a/target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch deleted file mode 100644 index 3db82bb483..0000000000 --- a/target/linux/bcm63xx/patches-4.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:28 +0100 -Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board - enables it - -BCM63XX-based board can control the registration of the EHCI controller -by setting their has_ehci0 flag to 1. Handle this in the generic -code dealing with board registration and call the actual helper to register -the EHCI controller. - -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -27,6 +27,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -882,6 +883,9 @@ int __init board_register_devices(void) - if (board.has_usbd) - bcm63xx_usbd_register(&board.usbd); - -+ if (board.has_ehci0) -+ bcm63xx_ehci_register(); -+ - if (board.has_ohci0) - bcm63xx_ohci_register(); - diff --git a/target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch deleted file mode 100644 index 6d91129932..0000000000 --- a/target/linux/bcm63xx/patches-4.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001 -From: Florian Fainelli -Date: Mon, 28 Jan 2013 20:06:30 +0100 -Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support - overcurrent - -This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it -does not support proper overcurrent reporting. - -Signed-off-by: Florian Fainelli ---- - arch/mips/bcm63xx/dev-usb-ehci.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/mips/bcm63xx/dev-usb-ehci.c -+++ b/arch/mips/bcm63xx/dev-usb-ehci.c -@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc - static struct usb_ehci_pdata bcm63xx_ehci_pdata = { - .big_endian_desc = 1, - .big_endian_mmio = 1, -+ .ignore_oc = 1, - .power_on = bcm63xx_ehci_power_on, - .power_off = bcm63xx_ehci_power_off, - .power_suspend = bcm63xx_ehci_power_off, diff --git a/target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch b/target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch deleted file mode 100644 index 609e108b40..0000000000 --- a/target/linux/bcm63xx/patches-4.14/121-mtd-bcm63xxpart-move-imagetag-parsing-to-its-own-par.patch +++ /dev/null @@ -1,482 +0,0 @@ -From a2b8c7f648e168573905818dbb4cb90ca3957c65 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 28 Jun 2017 18:29:43 +0200 -Subject: [PATCH] mtd: bcm63xxpart: move imagetag parsing to its own parser - -Move the bcm963xx Image Tag parsing into its own partition parser. This -Allows reusing the parser with different full flash parsers. - -While moving it, rename it to bcm963* to better reflect it isn't chip -but board specific. - -Signed-off-by: Jonas Gorski ---- -I tried to keep the code as-is, to keep the changes as small as -possible. - -One side effect is that the partitions get renumbered, which means any -root=/dev/mtdblock* will now point to the wrong mtd device. But since -bcm963xx boards will require these hardcoded in the kernel commandline -anyway this should b a non issue, as it can be easily updated. - -There is no such thing in the mips/bcm63xx defconfig, so nothing to update -there. - - drivers/mtd/Kconfig | 1 + - drivers/mtd/bcm63xxpart.c | 155 ++---------------------- - drivers/mtd/parsers/Kconfig | 11 ++ - drivers/mtd/parsers/Makefile | 1 + - drivers/mtd/parsers/parser_imagetag.c | 214 ++++++++++++++++++++++++++++++++++ - 5 files changed, 235 insertions(+), 147 deletions(-) - create mode 100644 drivers/mtd/parsers/parser_imagetag.c - ---- a/drivers/mtd/Kconfig -+++ b/drivers/mtd/Kconfig -@@ -163,6 +163,7 @@ config MTD_BCM63XX_PARTS - tristate "BCM63XX CFE partitioning support" - depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST - select CRC32 -+ select MTD_PARSER_IMAGETAG - help - This provides partions parsing for BCM63xx devices with CFE - bootloaders. ---- a/drivers/mtd/bcm63xxpart.c -+++ b/drivers/mtd/bcm63xxpart.c -@@ -93,51 +93,19 @@ static int bcm63xx_read_nvram(struct mtd - return 0; - } - --static int bcm63xx_read_image_tag(struct mtd_info *master, const char *name, -- loff_t tag_offset, struct bcm_tag *buf) --{ -- int ret; -- size_t retlen; -- u32 computed_crc; -- -- ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf); -- if (ret) -- return ret; -- -- if (retlen != sizeof(*buf)) -- return -EIO; -- -- computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf, -- offsetof(struct bcm_tag, header_crc)); -- if (computed_crc == buf->header_crc) { -- STR_NULL_TERMINATE(buf->board_id); -- STR_NULL_TERMINATE(buf->tag_version); -- -- pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n", -- name, tag_offset, buf->tag_version, buf->board_id); -- -- return 0; -- } -- -- pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n", -- name, tag_offset, buf->header_crc, computed_crc); -- return 1; --} -+static const char * const bcm63xx_cfe_part_types[] = { -+ "bcm963xx-imagetag", -+ NULL, -+}; - - static int bcm63xx_parse_cfe_nor_partitions(struct mtd_info *master, - const struct mtd_partition **pparts, struct bcm963xx_nvram *nvram) - { -- /* CFE, NVRAM and global Linux are always present */ -- int nrparts = 3, curpart = 0; -- struct bcm_tag *buf = NULL; - struct mtd_partition *parts; -- int ret; -- unsigned int rootfsaddr, kerneladdr, spareaddr; -- unsigned int rootfslen, kernellen, sparelen, totallen; -+ int nrparts = 3, curpart = 0; - unsigned int cfelen, nvramlen; - unsigned int cfe_erasesize; - int i; -- bool rootfs_first = false; - - cfe_erasesize = max_t(uint32_t, master->erasesize, - BCM963XX_CFE_BLOCK_SIZE); -@@ -146,83 +114,9 @@ static int bcm63xx_parse_cfe_nor_partiti - nvramlen = nvram->psi_size * SZ_1K; - nvramlen = roundup(nvramlen, cfe_erasesize); - -- buf = vmalloc(sizeof(struct bcm_tag)); -- if (!buf) -- return -ENOMEM; -- -- /* Get the tag */ -- ret = bcm63xx_read_image_tag(master, "rootfs", cfelen, buf); -- if (!ret) { -- STR_NULL_TERMINATE(buf->flash_image_start); -- if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) || -- rootfsaddr < BCM963XX_EXTENDED_SIZE) { -- pr_err("invalid rootfs address: %*ph\n", -- (int)sizeof(buf->flash_image_start), -- buf->flash_image_start); -- goto invalid_tag; -- } -- -- STR_NULL_TERMINATE(buf->kernel_address); -- if (kstrtouint(buf->kernel_address, 10, &kerneladdr) || -- kerneladdr < BCM963XX_EXTENDED_SIZE) { -- pr_err("invalid kernel address: %*ph\n", -- (int)sizeof(buf->kernel_address), -- buf->kernel_address); -- goto invalid_tag; -- } -- -- STR_NULL_TERMINATE(buf->kernel_length); -- if (kstrtouint(buf->kernel_length, 10, &kernellen)) { -- pr_err("invalid kernel length: %*ph\n", -- (int)sizeof(buf->kernel_length), -- buf->kernel_length); -- goto invalid_tag; -- } -- -- STR_NULL_TERMINATE(buf->total_length); -- if (kstrtouint(buf->total_length, 10, &totallen)) { -- pr_err("invalid total length: %*ph\n", -- (int)sizeof(buf->total_length), -- buf->total_length); -- goto invalid_tag; -- } -- -- kerneladdr = kerneladdr - BCM963XX_EXTENDED_SIZE; -- rootfsaddr = rootfsaddr - BCM963XX_EXTENDED_SIZE; -- spareaddr = roundup(totallen, master->erasesize) + cfelen; -- -- if (rootfsaddr < kerneladdr) { -- /* default Broadcom layout */ -- rootfslen = kerneladdr - rootfsaddr; -- rootfs_first = true; -- } else { -- /* OpenWrt layout */ -- rootfsaddr = kerneladdr + kernellen; -- rootfslen = spareaddr - rootfsaddr; -- } -- } else if (ret > 0) { --invalid_tag: -- kernellen = 0; -- rootfslen = 0; -- rootfsaddr = 0; -- spareaddr = cfelen; -- } else { -- goto out; -- } -- sparelen = master->size - spareaddr - nvramlen; -- -- /* Determine number of partitions */ -- if (rootfslen > 0) -- nrparts++; -- -- if (kernellen > 0) -- nrparts++; -- - parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL); -- if (!parts) { -- ret = -ENOMEM; -- goto out; -- } -+ if (!parts) -+ return -ENOMEM; - - /* Start building partition list */ - parts[curpart].name = "CFE"; -@@ -230,30 +124,6 @@ invalid_tag: - parts[curpart].size = cfelen; - curpart++; - -- if (kernellen > 0) { -- int kernelpart = curpart; -- -- if (rootfslen > 0 && rootfs_first) -- kernelpart++; -- parts[kernelpart].name = "kernel"; -- parts[kernelpart].offset = kerneladdr; -- parts[kernelpart].size = kernellen; -- curpart++; -- } -- -- if (rootfslen > 0) { -- int rootfspart = curpart; -- -- if (kernellen > 0 && rootfs_first) -- rootfspart--; -- parts[rootfspart].name = "rootfs"; -- parts[rootfspart].offset = rootfsaddr; -- parts[rootfspart].size = rootfslen; -- if (sparelen > 0 && !rootfs_first) -- parts[rootfspart].size += sparelen; -- curpart++; -- } -- - parts[curpart].name = "nvram"; - parts[curpart].offset = master->size - nvramlen; - parts[curpart].size = nvramlen; -@@ -263,22 +133,13 @@ invalid_tag: - parts[curpart].name = "linux"; - parts[curpart].offset = cfelen; - parts[curpart].size = master->size - cfelen - nvramlen; -+ parts[curpart].types = bcm63xx_cfe_part_types; - - for (i = 0; i < nrparts; i++) - pr_info("Partition %d is %s offset %llx and length %llx\n", i, - parts[i].name, parts[i].offset, parts[i].size); - -- pr_info("Spare partition is offset %x and length %x\n", spareaddr, -- sparelen); -- - *pparts = parts; -- ret = 0; -- --out: -- vfree(buf); -- -- if (ret) -- return ret; - - return nrparts; - } ---- a/drivers/mtd/parsers/Kconfig -+++ b/drivers/mtd/parsers/Kconfig -@@ -1,3 +1,14 @@ -+config MTD_PARSER_IMAGETAG -+ tristate "Parser for BCM963XX Image Tag format partitions" -+ depends on BCM63XX || BMIPS || COMPILE_TEST -+ select CRC32 -+ help -+ Image Tag is the firmware header used by broadcom on their xDSL line -+ of devices. It is used to describe the offsets and lengths of kernel -+ and rootfs partitions. -+ This driver adds support for parsing a partition with an Image Tag -+ header and creates up to two partitions, kernel and rootfs. -+ - config MTD_PARSER_TRX - tristate "Parser for TRX format partitions" - depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST) ---- a/drivers/mtd/parsers/Makefile -+++ b/drivers/mtd/parsers/Makefile -@@ -1,2 +1,3 @@ -+obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o - obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o - obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o ---- /dev/null -+++ b/drivers/mtd/parsers/parser_imagetag.c -@@ -0,0 +1,214 @@ -+/* -+ * BCM63XX CFE image tag parser -+ * -+ * Copyright © 2006-2008 Florian Fainelli -+ * Mike Albon -+ * Copyright © 2009-2010 Daniel Dickinson -+ * Copyright © 2011-2013 Jonas Gorski -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ */ -+ -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* Ensure strings read from flash structs are null terminated */ -+#define STR_NULL_TERMINATE(x) \ -+ do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0) -+ -+static int bcm963xx_read_imagetag(struct mtd_info *master, const char *name, -+ loff_t tag_offset, struct bcm_tag *buf) -+{ -+ int ret; -+ size_t retlen; -+ u32 computed_crc; -+ -+ ret = mtd_read(master, tag_offset, sizeof(*buf), &retlen, (void *)buf); -+ if (ret) -+ return ret; -+ -+ if (retlen != sizeof(*buf)) -+ return -EIO; -+ -+ computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf, -+ offsetof(struct bcm_tag, header_crc)); -+ if (computed_crc == buf->header_crc) { -+ STR_NULL_TERMINATE(buf->board_id); -+ STR_NULL_TERMINATE(buf->tag_version); -+ -+ pr_info("%s: CFE image tag found at 0x%llx with version %s, board type %s\n", -+ name, tag_offset, buf->tag_version, buf->board_id); -+ -+ return 0; -+ } -+ -+ pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n", -+ name, tag_offset, buf->header_crc, computed_crc); -+ return -EINVAL; -+} -+ -+static int bcm963xx_parse_imagetag_partitions(struct mtd_info *master, -+ const struct mtd_partition **pparts, -+ struct mtd_part_parser_data *data) -+{ -+ /* CFE, NVRAM and global Linux are always present */ -+ int nrparts = 0, curpart = 0; -+ struct bcm_tag *buf = NULL; -+ struct mtd_partition *parts; -+ int ret; -+ unsigned int rootfsaddr, kerneladdr, spareaddr, offset; -+ unsigned int rootfslen, kernellen, sparelen, totallen; -+ int i; -+ bool rootfs_first = false; -+ -+ buf = vmalloc(sizeof(struct bcm_tag)); -+ if (!buf) -+ return -ENOMEM; -+ -+ /* Get the tag */ -+ ret = bcm963xx_read_imagetag(master, "rootfs", 0, buf); -+ if (!ret) { -+ STR_NULL_TERMINATE(buf->flash_image_start); -+ if (kstrtouint(buf->flash_image_start, 10, &rootfsaddr) || -+ rootfsaddr < BCM963XX_EXTENDED_SIZE) { -+ pr_err("invalid rootfs address: %*ph\n", -+ (int)sizeof(buf->flash_image_start), -+ buf->flash_image_start); -+ goto out; -+ } -+ -+ STR_NULL_TERMINATE(buf->kernel_address); -+ if (kstrtouint(buf->kernel_address, 10, &kerneladdr) || -+ kerneladdr < BCM963XX_EXTENDED_SIZE) { -+ pr_err("invalid kernel address: %*ph\n", -+ (int)sizeof(buf->kernel_address), -+ buf->kernel_address); -+ goto out; -+ } -+ -+ STR_NULL_TERMINATE(buf->kernel_length); -+ if (kstrtouint(buf->kernel_length, 10, &kernellen)) { -+ pr_err("invalid kernel length: %*ph\n", -+ (int)sizeof(buf->kernel_length), -+ buf->kernel_length); -+ goto out; -+ } -+ -+ STR_NULL_TERMINATE(buf->total_length); -+ if (kstrtouint(buf->total_length, 10, &totallen)) { -+ pr_err("invalid total length: %*ph\n", -+ (int)sizeof(buf->total_length), -+ buf->total_length); -+ goto out; -+ } -+ -+ /* -+ * Addresses are flash absolute, so convert to partition -+ * relative addresses. Assume either kernel or rootfs will -+ * directly follow the image tag. -+ */ -+ if (rootfsaddr < kerneladdr) -+ offset = rootfsaddr - sizeof(struct bcm_tag); -+ else -+ offset = kerneladdr - sizeof(struct bcm_tag); -+ -+ kerneladdr = kerneladdr - offset; -+ rootfsaddr = rootfsaddr - offset; -+ spareaddr = roundup(totallen, master->erasesize); -+ -+ if (rootfsaddr < kerneladdr) { -+ /* default Broadcom layout */ -+ rootfslen = kerneladdr - rootfsaddr; -+ rootfs_first = true; -+ } else { -+ /* OpenWrt layout */ -+ rootfsaddr = kerneladdr + kernellen; -+ rootfslen = spareaddr - rootfsaddr; -+ } -+ } else { -+ goto out; -+ } -+ sparelen = master->size - spareaddr; -+ -+ /* Determine number of partitions */ -+ if (rootfslen > 0) -+ nrparts++; -+ -+ if (kernellen > 0) -+ nrparts++; -+ -+ parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL); -+ if (!parts) { -+ ret = -ENOMEM; -+ goto out; -+ } -+ -+ /* Start building partition list */ -+ if (kernellen > 0) { -+ int kernelpart = curpart; -+ -+ if (rootfslen > 0 && rootfs_first) -+ kernelpart++; -+ parts[kernelpart].name = "kernel"; -+ parts[kernelpart].offset = kerneladdr; -+ parts[kernelpart].size = kernellen; -+ curpart++; -+ } -+ -+ if (rootfslen > 0) { -+ int rootfspart = curpart; -+ -+ if (kernellen > 0 && rootfs_first) -+ rootfspart--; -+ parts[rootfspart].name = "rootfs"; -+ parts[rootfspart].offset = rootfsaddr; -+ parts[rootfspart].size = rootfslen; -+ if (sparelen > 0 && !rootfs_first) -+ parts[rootfspart].size += sparelen; -+ curpart++; -+ } -+ -+ for (i = 0; i < nrparts; i++) -+ pr_info("Partition %d is %s offset %llx and length %llx\n", i, -+ parts[i].name, parts[i].offset, parts[i].size); -+ -+ pr_info("Spare partition is offset %x and length %x\n", spareaddr, -+ sparelen); -+ -+ *pparts = parts; -+ ret = 0; -+ -+out: -+ vfree(buf); -+ -+ if (ret) -+ return ret; -+ -+ return nrparts; -+} -+ -+static struct mtd_part_parser bcm963xx_imagetag_parser = { -+ .parse_fn = bcm963xx_parse_imagetag_partitions, -+ .name = "bcm963xx-imagetag", -+}; -+module_mtd_part_parser(bcm963xx_imagetag_parser); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Daniel Dickinson "); -+MODULE_AUTHOR("Florian Fainelli "); -+MODULE_AUTHOR("Mike Albon "); -+MODULE_AUTHOR("Jonas Gorski -Date: Wed, 28 Jun 2017 18:34:42 +0200 -Subject: [PATCH 1/2] mtd: bcm63xxpart: add of_match_table - -Signed-off-by: Jonas Gorski ---- - drivers/mtd/bcm63xxpart.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/mtd/bcm63xxpart.c -+++ b/drivers/mtd/bcm63xxpart.c -@@ -34,6 +34,7 @@ - #include - #include - #include -+#include - - #define BCM963XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */ - -@@ -172,9 +173,16 @@ out: - return ret; - }; - -+static const struct of_device_id parse_bcm63xx_cfe_match_table[] = { -+ { .compatible = "brcm,bcm963xx-cfe-nor-partitions" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, parse_bcm63xx_cfe_match_table); -+ - static struct mtd_part_parser bcm63xx_cfe_parser = { - .parse_fn = bcm63xx_parse_cfe_partitions, - .name = "bcm63xxpart", -+ .of_match_table = parse_bcm63xx_cfe_match_table, - }; - module_mtd_part_parser(bcm63xx_cfe_parser); - diff --git a/target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch b/target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch deleted file mode 100644 index 04978b374e..0000000000 --- a/target/linux/bcm63xx/patches-4.14/123-mtd-parser_bcm63xx_imagetag-add-of_match_table-suppo.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 3303dd9f5b197cc2efd9cbd7b9b45fc1e510a393 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 28 Jun 2017 18:37:12 +0200 -Subject: [PATCH 2/2] mtd: parser_bcm63xx_imagetag: add of_match_table support - -Signed-off-by: Jonas Gorski ---- - drivers/mtd/parsers/parser_imagetag.c | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/drivers/mtd/parsers/parser_imagetag.c -+++ b/drivers/mtd/parsers/parser_imagetag.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - /* Ensure strings read from flash structs are null terminated */ - #define STR_NULL_TERMINATE(x) \ -@@ -200,9 +201,16 @@ out: - return nrparts; - } - -+static const struct of_device_id parse_bcm963xx_imagetag_match_table[] = { -+ { .compatible = "brcm,bcm963xx-imagetag" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, parse_bcm963xx_imagetag_match_table); -+ - static struct mtd_part_parser bcm963xx_imagetag_parser = { - .parse_fn = bcm963xx_parse_imagetag_partitions, - .name = "bcm963xx-imagetag", -+ .of_match_table = parse_bcm963xx_imagetag_match_table, - }; - module_mtd_part_parser(bcm963xx_imagetag_parser); - diff --git a/target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch b/target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch deleted file mode 100644 index 53e89324cd..0000000000 --- a/target/linux/bcm63xx/patches-4.14/130-pinctrl-add-bcm63xx-base-code.patch +++ /dev/null @@ -1,226 +0,0 @@ -From ab2f33e35e35905a76204138143875251f3e1088 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 24 Jun 2016 22:07:42 +0200 -Subject: [PATCH 01/13] pinctrl: add bcm63xx base code - -Setup directory and add a helper for bcm63xx pinctrl support. - -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/Kconfig | 1 + - drivers/pinctrl/Makefile | 1 + - drivers/pinctrl/bcm63xx/Kconfig | 3 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c | 142 ++++++++++++++++++++++++++++++ - drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h | 14 +++ - 7 files changed, 163 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/Kconfig - create mode 100644 drivers/pinctrl/bcm63xx/Makefile - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h - ---- a/drivers/pinctrl/Kconfig -+++ b/drivers/pinctrl/Kconfig -@@ -351,6 +351,7 @@ config PINCTRL_RK805 - - source "drivers/pinctrl/aspeed/Kconfig" - source "drivers/pinctrl/bcm/Kconfig" -+source "drivers/pinctrl/bcm63xx/Kconfig" - source "drivers/pinctrl/berlin/Kconfig" - source "drivers/pinctrl/freescale/Kconfig" - source "drivers/pinctrl/intel/Kconfig" ---- a/drivers/pinctrl/Makefile -+++ b/drivers/pinctrl/Makefile -@@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_RK805) += pinctrl-r - - obj-$(CONFIG_ARCH_ASPEED) += aspeed/ - obj-y += bcm/ -+obj-y += bcm63xx/ - obj-$(CONFIG_PINCTRL_BERLIN) += berlin/ - obj-y += freescale/ - obj-$(CONFIG_X86) += intel/ ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -0,0 +1,3 @@ -+config PINCTRL_BCM63XX -+ bool -+ select GPIO_GENERIC ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.c -@@ -0,0 +1,155 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include "pinctrl-bcm63xx.h" -+#include "../core.h" -+ -+#define BANK_SIZE sizeof(u32) -+#define PINS_PER_BANK (BANK_SIZE * BITS_PER_BYTE) -+ -+#ifdef CONFIG_OF -+static int bcm63xx_gpio_of_xlate(struct gpio_chip *gc, -+ const struct of_phandle_args *gpiospec, -+ u32 *flags) -+{ -+ struct gpio_chip *base = gpiochip_get_data(gc); -+ int pin = gpiospec->args[0]; -+ -+ if (gc != &base[pin / PINS_PER_BANK]) -+ return -EINVAL; -+ -+ pin = pin % PINS_PER_BANK; -+ -+ if (pin >= gc->ngpio) -+ return -EINVAL; -+ -+ if (flags) -+ *flags = gpiospec->args[1]; -+ -+ return pin; -+} -+#endif -+ -+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct gpio_chip *base = gpiochip_get_data(chip); -+ char irq_name[7]; /* "gpioXX" */ -+ -+ /* FIXME: this is ugly */ -+ sprintf(irq_name, "gpio%d", gpio + PINS_PER_BANK * (chip - base)); -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm63xx_setup_gpio(struct device *dev, struct gpio_chip *gc, -+ void __iomem *dirout, void __iomem *data, -+ size_t sz, int ngpio) -+ -+{ -+ int banks, chips, i, ret = -EINVAL; -+ -+ chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK); -+ banks = sz / BANK_SIZE; -+ -+ for (i = 0; i < chips; i++) { -+ int offset, pins; -+ int reg_offset; -+ char *label; -+ -+ label = devm_kasprintf(dev, GFP_KERNEL, "bcm63xx-gpio.%i", i); -+ if (!label) -+ return -ENOMEM; -+ -+ offset = i * PINS_PER_BANK; -+ pins = min_t(int, ngpio - offset, PINS_PER_BANK); -+ -+ /* the registers are treated like a huge big endian register */ -+ reg_offset = (banks - i - 1) * BANK_SIZE; -+ -+ ret = bgpio_init(&gc[i], dev, BANK_SIZE, data + reg_offset, -+ NULL, NULL, dirout + reg_offset, NULL, -+ BGPIOF_BIG_ENDIAN_BYTE_ORDER); -+ if (ret) -+ return ret; -+ -+ gc[i].request = gpiochip_generic_request; -+ gc[i].free = gpiochip_generic_free; -+ -+ if (of_get_property(dev->of_node, "interrupt-names", NULL)) -+ gc[i].to_irq = bcm63xx_gpio_to_irq; -+ -+#ifdef CONFIG_OF -+ gc[i].of_gpio_n_cells = 2; -+ gc[i].of_xlate = bcm63xx_gpio_of_xlate; -+#endif -+ -+ gc[i].label = label; -+ gc[i].ngpio = pins; -+ -+ devm_gpiochip_add_data(dev, &gc[i], gc); -+ } -+ -+ return 0; -+} -+ -+static void bcm63xx_setup_pinranges(struct gpio_chip *gc, const char *name, -+ int ngpio) -+{ -+ int i, chips = DIV_ROUND_UP(ngpio, PINS_PER_BANK); -+ -+ for (i = 0; i < chips; i++) { -+ int offset, pins; -+ -+ offset = i * PINS_PER_BANK; -+ pins = min_t(int, ngpio - offset, PINS_PER_BANK); -+ -+ gpiochip_add_pin_range(&gc[i], name, 0, offset, pins); -+ } -+} -+ -+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev, -+ struct pinctrl_desc *desc, -+ void *priv, struct gpio_chip *gc, -+ int ngpio) -+{ -+ struct pinctrl_dev *pctldev; -+ struct resource *res; -+ void __iomem *dirout, *data; -+ size_t sz; -+ int ret; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirout"); -+ dirout = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(dirout)) -+ return ERR_CAST(dirout); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dat"); -+ data = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(data)) -+ return ERR_CAST(data); -+ -+ sz = resource_size(res); -+ -+ ret = bcm63xx_setup_gpio(&pdev->dev, gc, dirout, data, sz, ngpio); -+ if (ret) -+ return ERR_PTR(ret); -+ -+ pctldev = devm_pinctrl_register(&pdev->dev, desc, priv); -+ if (IS_ERR(pctldev)) -+ return pctldev; -+ -+ bcm63xx_setup_pinranges(gc, pinctrl_dev_get_devname(pctldev), ngpio); -+ -+ dev_info(&pdev->dev, "registered at mmio %p\n", dirout); -+ -+ return pctldev; -+} ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63xx.h -@@ -0,0 +1,14 @@ -+#ifndef __PINCTRL_BCM63XX -+#define __PINCTRL_BCM63XX -+ -+#include -+#include -+#include -+#include -+ -+struct pinctrl_dev *bcm63xx_pinctrl_register(struct platform_device *pdev, -+ struct pinctrl_desc *desc, -+ void *priv, struct gpio_chip *gc, -+ int ngpio); -+ -+#endif diff --git a/target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch deleted file mode 100644 index 3a2a7811db..0000000000 --- a/target/linux/bcm63xx/patches-4.14/131-Documentation-add-BCM6328-pincontroller-binding-docu.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 4bdd40849632608d5cb7d3a64380cd76e7eea07b Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 27 Jul 2016 11:33:56 +0200 -Subject: [PATCH 02/16] Documentation: add BCM6328 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6328 SoCs. - -Signed-off-by: Jonas Gorski ---- - .../bindings/pinctrl/brcm,bcm6328-pinctrl.txt | 61 ++++++++++++++++++++++ - 1 file changed, 61 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.txt -@@ -0,0 +1,61 @@ -+* Broadcom BCM6328 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6328-pinctrl". -+- reg: Register specifies of dirout, dat, mode, mux registers. -+- reg-names: Must be "dirout", "dat", "mode", "mux". -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2> -+ -+Example: -+ -+pinctrl: pin-controller@10000080 { -+ compatible = "brcm,bcm6328-pinctrl"; -+ reg = <0x10000080 0x8>, -+ <0x10000088 0x8>, -+ <0x10000098 0x4>, -+ <0x1000009c 0xc>; -+ reg-names = "dirout", "dat", "mode", "mux"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 led -+gpio1 1 led -+gpio2 2 led -+gpio3 3 led -+gpio4 4 led -+gpio5 5 led -+gpio6 6 led, serial_led_data -+gpio7 7 led, serial_led_clk -+gpio8 8 led -+gpio9 9 led -+gpio10 10 led -+gpio11 11 led -+gpio12 12 led -+gpio13 13 led -+gpio14 14 led -+gpio15 15 led -+gpio16 16 led, pcie_clkreq -+gpio17 17 led -+gpio18 18 led -+gpio19 19 led -+gpio20 20 led -+gpio21 21 led -+gpio22 22 led -+gpio23 23 led -+gpio24 24 - -+gpio25 25 ephy0_act_led -+gpio26 26 ephy1_act_led -+gpio27 27 ephy2_act_led -+gpio28 28 ephy3_act_led -+gpio29 29 - -+gpio30 30 - -+gpio31 31 - -+hsspi_cs1 - hsspi_cs1 -+usb_port1 - usb_host_port, usb_device_port diff --git a/target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch b/target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch deleted file mode 100644 index 3c5f15b91f..0000000000 --- a/target/linux/bcm63xx/patches-4.14/132-pinctrl-add-a-pincontrol-driver-for-BCM6328.patch +++ /dev/null @@ -1,495 +0,0 @@ -From 393e9753f6492c1fdf55891ddee60d955ae8b119 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 24 Jun 2016 22:12:50 +0200 -Subject: [PATCH 03/16] pinctrl: add a pincontrol driver for BCM6328 - -Add a pincontrol driver for BCM6328. BCM628 supports muxing 32 pins as -GPIOs, as LEDs for the integrated LED controller, or various other -functions. Its pincontrol mux registers also control other aspects, like -switching the second USB port between host and device mode. - -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm63xx/Kconfig | 7 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c | 456 ++++++++++++++++++++++++++++++ - 3 files changed, 464 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c - ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -1,3 +1,10 @@ - config PINCTRL_BCM63XX - bool - select GPIO_GENERIC -+ -+config PINCTRL_BCM6328 -+ bool "BCM6328 pincontrol driver" if COMPILE_TEST -+ select PINMUX -+ select PINCONF -+ select PINCTRL_BCM63XX -+ select GENERIC_PINCONF ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -1 +1,2 @@ - obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o -+obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6328.c -@@ -0,0 +1,456 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#include "pinctrl-bcm63xx.h" -+ -+#define BCM6328_MUX_LO_REG 0x4 -+#define BCM6328_MUX_HI_REG 0x0 -+#define BCM6328_MUX_OTHER_REG 0x8 -+ -+#define BCM6328_NGPIO 32 -+ -+struct bcm6328_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6328_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ unsigned mode_val:1; -+ unsigned mux_val:2; -+}; -+ -+struct bcm6328_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *mode; -+ void __iomem *mux[3]; -+ -+ /* register access lock */ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio; -+}; -+ -+static const struct pinctrl_pin_desc bcm6328_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ PINCTRL_PIN(2, "gpio2"), -+ PINCTRL_PIN(3, "gpio3"), -+ PINCTRL_PIN(4, "gpio4"), -+ PINCTRL_PIN(5, "gpio5"), -+ PINCTRL_PIN(6, "gpio6"), -+ PINCTRL_PIN(7, "gpio7"), -+ PINCTRL_PIN(8, "gpio8"), -+ PINCTRL_PIN(9, "gpio9"), -+ PINCTRL_PIN(10, "gpio10"), -+ PINCTRL_PIN(11, "gpio11"), -+ PINCTRL_PIN(12, "gpio12"), -+ PINCTRL_PIN(13, "gpio13"), -+ PINCTRL_PIN(14, "gpio14"), -+ PINCTRL_PIN(15, "gpio15"), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ PINCTRL_PIN(22, "gpio22"), -+ PINCTRL_PIN(23, "gpio23"), -+ PINCTRL_PIN(24, "gpio24"), -+ PINCTRL_PIN(25, "gpio25"), -+ PINCTRL_PIN(26, "gpio26"), -+ PINCTRL_PIN(27, "gpio27"), -+ PINCTRL_PIN(28, "gpio28"), -+ PINCTRL_PIN(29, "gpio29"), -+ PINCTRL_PIN(30, "gpio30"), -+ PINCTRL_PIN(31, "gpio31"), -+ -+ /* -+ * No idea where they really are; so let's put them according -+ * to their mux offsets. -+ */ -+ PINCTRL_PIN(36, "hsspi_cs1"), -+ PINCTRL_PIN(38, "usb_p2"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+ -+static unsigned hsspi_cs1_pins[] = { 36 }; -+static unsigned usb_port1_pins[] = { 38 }; -+ -+#define BCM6328_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm6328_pingroup bcm6328_groups[] = { -+ BCM6328_GROUP(gpio0), -+ BCM6328_GROUP(gpio1), -+ BCM6328_GROUP(gpio2), -+ BCM6328_GROUP(gpio3), -+ BCM6328_GROUP(gpio4), -+ BCM6328_GROUP(gpio5), -+ BCM6328_GROUP(gpio6), -+ BCM6328_GROUP(gpio7), -+ BCM6328_GROUP(gpio8), -+ BCM6328_GROUP(gpio9), -+ BCM6328_GROUP(gpio10), -+ BCM6328_GROUP(gpio11), -+ BCM6328_GROUP(gpio12), -+ BCM6328_GROUP(gpio13), -+ BCM6328_GROUP(gpio14), -+ BCM6328_GROUP(gpio15), -+ BCM6328_GROUP(gpio16), -+ BCM6328_GROUP(gpio17), -+ BCM6328_GROUP(gpio18), -+ BCM6328_GROUP(gpio19), -+ BCM6328_GROUP(gpio20), -+ BCM6328_GROUP(gpio21), -+ BCM6328_GROUP(gpio22), -+ BCM6328_GROUP(gpio23), -+ BCM6328_GROUP(gpio24), -+ BCM6328_GROUP(gpio25), -+ BCM6328_GROUP(gpio26), -+ BCM6328_GROUP(gpio27), -+ BCM6328_GROUP(gpio28), -+ BCM6328_GROUP(gpio29), -+ BCM6328_GROUP(gpio30), -+ BCM6328_GROUP(gpio31), -+ -+ BCM6328_GROUP(hsspi_cs1), -+ BCM6328_GROUP(usb_port1), -+}; -+ -+/* GPIO_MODE */ -+static const char * const led_groups[] = { -+ "gpio0", -+ "gpio1", -+ "gpio2", -+ "gpio3", -+ "gpio4", -+ "gpio5", -+ "gpio6", -+ "gpio7", -+ "gpio8", -+ "gpio9", -+ "gpio10", -+ "gpio11", -+ "gpio12", -+ "gpio13", -+ "gpio14", -+ "gpio15", -+ "gpio16", -+ "gpio17", -+ "gpio18", -+ "gpio19", -+ "gpio20", -+ "gpio21", -+ "gpio22", -+ "gpio23", -+}; -+ -+/* PINMUX_SEL */ -+static const char * const serial_led_data_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const inet_act_led_groups[] = { -+ "gpio11", -+}; -+ -+static const char * const pcie_clkreq_groups[] = { -+ "gpio16", -+}; -+ -+static const char * const ephy0_act_led_groups[] = { -+ "gpio25", -+}; -+ -+static const char * const ephy1_act_led_groups[] = { -+ "gpio26", -+}; -+ -+static const char * const ephy2_act_led_groups[] = { -+ "gpio27", -+}; -+ -+static const char * const ephy3_act_led_groups[] = { -+ "gpio28", -+}; -+ -+static const char * const hsspi_cs1_groups[] = { -+ "hsspi_cs1" -+}; -+ -+static const char * const usb_host_port_groups[] = { -+ "usb_port1", -+}; -+ -+static const char * const usb_device_port_groups[] = { -+ "usb_port1", -+}; -+ -+#define BCM6328_MODE_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .mode_val = 1, \ -+ } -+ -+#define BCM6328_MUX_FUN(n, mux) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .mux_val = mux, \ -+ } -+ -+static const struct bcm6328_function bcm6328_funcs[] = { -+ BCM6328_MODE_FUN(led), -+ BCM6328_MUX_FUN(serial_led_data, 2), -+ BCM6328_MUX_FUN(serial_led_clk, 2), -+ BCM6328_MUX_FUN(inet_act_led, 1), -+ BCM6328_MUX_FUN(pcie_clkreq, 2), -+ BCM6328_MUX_FUN(ephy0_act_led, 1), -+ BCM6328_MUX_FUN(ephy1_act_led, 1), -+ BCM6328_MUX_FUN(ephy2_act_led, 1), -+ BCM6328_MUX_FUN(ephy3_act_led, 1), -+ BCM6328_MUX_FUN(hsspi_cs1, 2), -+ BCM6328_MUX_FUN(usb_host_port, 1), -+ BCM6328_MUX_FUN(usb_device_port, 2), -+}; -+ -+static int bcm6328_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6328_groups); -+} -+ -+static const char *bcm6328_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6328_groups[group].name; -+} -+ -+static int bcm6328_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6328_groups[group].pins; -+ *num_pins = bcm6328_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6328_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6328_funcs); -+} -+ -+static const char *bcm6328_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6328_funcs[selector].name; -+} -+ -+static int bcm6328_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6328_funcs[selector].groups; -+ *num_groups = bcm6328_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm6328_rmw_mux(struct bcm6328_pinctrl *pctl, unsigned pin, -+ u32 mode, u32 mux) -+{ -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ if (pin < 32) { -+ reg = __raw_readl(pctl->mode); -+ reg &= ~BIT(pin); -+ if (mode) -+ reg |= BIT(pin); -+ __raw_writel(reg, pctl->mode); -+ } -+ -+ reg = __raw_readl(pctl->mux[pin / 16]); -+ reg &= ~(3UL << ((pin % 16) * 2)); -+ reg |= mux << ((pin % 16) * 2); -+ __raw_writel(reg, pctl->mux[pin / 16]); -+ -+ spin_unlock_irqrestore(&pctl->lock, flags); -+} -+ -+static int bcm6328_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6328_pingroup *grp = &bcm6328_groups[group]; -+ const struct bcm6328_function *f = &bcm6328_funcs[selector]; -+ -+ bcm6328_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val); -+ -+ return 0; -+} -+ -+static int bcm6328_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6328_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable all functions using this pin */ -+ bcm6328_rmw_mux(pctl, offset, 0, 0); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6328_pctl_ops = { -+ .get_groups_count = bcm6328_pinctrl_get_group_count, -+ .get_group_name = bcm6328_pinctrl_get_group_name, -+ .get_group_pins = bcm6328_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif -+}; -+ -+static struct pinmux_ops bcm6328_pmx_ops = { -+ .get_functions_count = bcm6328_pinctrl_get_func_count, -+ .get_function_name = bcm6328_pinctrl_get_func_name, -+ .get_function_groups = bcm6328_pinctrl_get_groups, -+ .set_mux = bcm6328_pinctrl_set_mux, -+ .gpio_request_enable = bcm6328_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6328_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct bcm6328_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *mode, *mux; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux"); -+ mux = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mux)) -+ return PTR_ERR(mux); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); -+ -+ pctl->mode = mode; -+ pctl->mux[0] = mux + BCM6328_MUX_LO_REG; -+ pctl->mux[1] = mux + BCM6328_MUX_HI_REG; -+ pctl->mux[2] = mux + BCM6328_MUX_OTHER_REG; -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6328_pctl_ops; -+ pctl->desc.pmxops = &bcm6328_pmx_ops; -+ -+ pctl->desc.npins = ARRAY_SIZE(bcm6328_pins); -+ pctl->desc.pins = bcm6328_pins; -+ -+ platform_set_drvdata(pdev, pctl); -+ -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ &pctl->gpio, BCM6328_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6328_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6328-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6328_pinctrl_driver = { -+ .probe = bcm6328_pinctrl_probe, -+ .driver = { -+ .name = "bcm6328-pinctrl", -+ .of_match_table = bcm6328_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6328_pinctrl_driver); diff --git a/target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch deleted file mode 100644 index 6bac90373c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/133-Documentation-add-BCM6348-pincontroller-binding-docu.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 962c46bf7f43df730e2d3698930e77958cc6b191 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 27 Jul 2016 11:35:45 +0200 -Subject: [PATCH 04/16] Documentation: add BCM6348 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6348 SoCs. - -Signed-off-by: Jonas Gorski ---- - .../bindings/pinctrl/brcm,bcm6348-pinctrl.txt | 32 ++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6348-pinctrl.txt -@@ -0,0 +1,32 @@ -+* Broadcom BCM6348 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6348-pinctrl". -+- reg: register Specifiers of dirout, dat, mode registers. -+- reg-names: Must be "dirout", "dat", "mode". -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@fffe0080 { -+ compatible = "brcm,bcm6348-pinctrl"; -+ reg = <0xfffe0080 0x8>, -+ <0xfffe0088 0x8>, -+ <0xfffe0098 0x4>; -+ reg-names = "dirout", "dat", "mode"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+group0 32-36 ext_mii, utopia, diag -+group1 22-31 ext_ephy, mii_snoop, mii_pccard, -+ spi_master_uart, utopia, diag -+group2 16-21 pci, diag -+group3 8-15 ext_mii, utopia -+group4 0-7 ext_ephy, mii_snoop, legacy_led, diag diff --git a/target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch b/target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch deleted file mode 100644 index b48723c1b3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/134-pinctrl-add-a-pincontrol-driver-for-BCM6348.patch +++ /dev/null @@ -1,431 +0,0 @@ -From 45444cb631555e2dc16b95d779b10aa075c7482e Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 24 Jun 2016 22:14:13 +0200 -Subject: [PATCH 05/16] pinctrl: add a pincontrol driver for BCM6348 - -Add a pincotrol driver for BCM6348. BCM6348 allow muxing five groups of -up to ten gpios into fourteen potential functions. It does not allow -muxing individual pins. Some functions require more than one group to be -muxed to the same function. - -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm63xx/Kconfig | 7 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c | 391 ++++++++++++++++++++++++++++++ - 3 files changed, 399 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c - ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -8,3 +8,10 @@ config PINCTRL_BCM6328 - select PINCONF - select PINCTRL_BCM63XX - select GENERIC_PINCONF -+ -+config PINCTRL_BCM6348 -+ bool "BCM6348 pincontrol driver" if COMPILE_TEST -+ select PINMUX -+ select PINCONF -+ select PINCTRL_BCM63XX -+ select GENERIC_PINCONF ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -1,2 +1,3 @@ - obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o -+obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6348.c -@@ -0,0 +1,391 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#include "pinctrl-bcm63xx.h" -+ -+#define BCM6348_NGPIO 37 -+ -+#define MAX_GROUP 4 -+#define PINS_PER_GROUP 8 -+#define PIN_TO_GROUP(pin) (MAX_GROUP - ((pin) / PINS_PER_GROUP)) -+#define GROUP_SHIFT(pin) (PIN_TO_GROUP(pin) * 4) -+#define GROUP_MASK(pin) (0xf << GROUP_SHIFT(pin)) -+ -+struct bcm6348_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6348_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ unsigned int value; -+}; -+ -+struct bcm6348_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *mode; -+ -+ /* register access lock */ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio[2]; -+}; -+ -+#define BCM6348_PIN(a, b, group) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)(group), \ -+ } -+ -+static const struct pinctrl_pin_desc bcm6348_pins[] = { -+ BCM6348_PIN(0, "gpio0", 4), -+ BCM6348_PIN(1, "gpio1", 4), -+ BCM6348_PIN(2, "gpio2", 4), -+ BCM6348_PIN(3, "gpio3", 4), -+ BCM6348_PIN(4, "gpio4", 4), -+ BCM6348_PIN(5, "gpio5", 4), -+ BCM6348_PIN(6, "gpio6", 4), -+ BCM6348_PIN(7, "gpio7", 4), -+ BCM6348_PIN(8, "gpio8", 3), -+ BCM6348_PIN(9, "gpio9", 3), -+ BCM6348_PIN(10, "gpio10", 3), -+ BCM6348_PIN(11, "gpio11", 3), -+ BCM6348_PIN(12, "gpio12", 3), -+ BCM6348_PIN(13, "gpio13", 3), -+ BCM6348_PIN(14, "gpio14", 3), -+ BCM6348_PIN(15, "gpio15", 3), -+ BCM6348_PIN(16, "gpio16", 2), -+ BCM6348_PIN(17, "gpio17", 2), -+ BCM6348_PIN(18, "gpio18", 2), -+ BCM6348_PIN(19, "gpio19", 2), -+ BCM6348_PIN(20, "gpio20", 2), -+ BCM6348_PIN(21, "gpio21", 2), -+ BCM6348_PIN(22, "gpio22", 1), -+ BCM6348_PIN(23, "gpio23", 1), -+ BCM6348_PIN(24, "gpio24", 1), -+ BCM6348_PIN(25, "gpio25", 1), -+ BCM6348_PIN(26, "gpio26", 1), -+ BCM6348_PIN(27, "gpio27", 1), -+ BCM6348_PIN(28, "gpio28", 1), -+ BCM6348_PIN(29, "gpio29", 1), -+ BCM6348_PIN(30, "gpio30", 1), -+ BCM6348_PIN(31, "gpio31", 1), -+ BCM6348_PIN(32, "gpio32", 0), -+ BCM6348_PIN(33, "gpio33", 0), -+ BCM6348_PIN(34, "gpio34", 0), -+ BCM6348_PIN(35, "gpio35", 0), -+ BCM6348_PIN(36, "gpio36", 0), -+}; -+ -+enum bcm6348_muxes { -+ BCM6348_MUX_GPIO = 0, -+ BCM6348_MUX_EXT_EPHY, -+ BCM6348_MUX_MII_SNOOP, -+ BCM6348_MUX_LEGACY_LED, -+ BCM6348_MUX_MII_PCCARD, -+ BCM6348_MUX_PCI, -+ BCM6348_MUX_SPI_MASTER_UART, -+ BCM6348_MUX_EXT_MII, -+ BCM6348_MUX_UTOPIA, -+ BCM6348_MUX_DIAG, -+}; -+ -+static unsigned group0_pins[] = { -+ 32, 33, 34, 35, 36, -+}; -+ -+static unsigned group1_pins[] = { -+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, -+}; -+ -+static unsigned group2_pins[] = { -+ 16, 17, 18, 19, 20, 21, -+}; -+ -+static unsigned group3_pins[] = { -+ 8, 9, 10, 11, 12, 13, 14, 15, -+}; -+ -+static unsigned group4_pins[] = { -+ 0, 1, 2, 3, 4, 5, 6, 7, -+}; -+ -+#define BCM6348_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } \ -+ -+static struct bcm6348_pingroup bcm6348_groups[] = { -+ BCM6348_GROUP(group0), -+ BCM6348_GROUP(group1), -+ BCM6348_GROUP(group2), -+ BCM6348_GROUP(group3), -+ BCM6348_GROUP(group4), -+}; -+ -+static const char * const ext_mii_groups[] = { -+ "group0", -+ "group3", -+}; -+ -+static const char * const ext_ephy_groups[] = { -+ "group1", -+ "group4" -+}; -+ -+static const char * const mii_snoop_groups[] = { -+ "group1", -+ "group4", -+}; -+ -+static const char * const legacy_led_groups[] = { -+ "group4", -+}; -+ -+static const char * const mii_pccard_groups[] = { -+ "group1", -+}; -+ -+static const char * const pci_groups[] = { -+ "group2", -+}; -+ -+static const char * const spi_master_uart_groups[] = { -+ "group1", -+}; -+ -+static const char * const utopia_groups[] = { -+ "group0", -+ "group1", -+ "group3", -+}; -+ -+static const char * const diag_groups[] = { -+ "group0", -+ "group1", -+ "group2", -+ "group4", -+}; -+ -+#define BCM6348_FUN(n, f) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .value = BCM6348_MUX_##f, \ -+ } -+ -+static const struct bcm6348_function bcm6348_funcs[] = { -+ BCM6348_FUN(ext_mii, EXT_MII), -+ BCM6348_FUN(ext_ephy, EXT_EPHY), -+ BCM6348_FUN(mii_snoop, MII_SNOOP), -+ BCM6348_FUN(legacy_led, LEGACY_LED), -+ BCM6348_FUN(mii_pccard, MII_PCCARD), -+ BCM6348_FUN(pci, PCI), -+ BCM6348_FUN(spi_master_uart, SPI_MASTER_UART), -+ BCM6348_FUN(utopia, UTOPIA), -+ BCM6348_FUN(diag, DIAG), -+}; -+ -+static int bcm6348_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6348_groups); -+} -+ -+static const char *bcm6348_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6348_groups[group].name; -+} -+ -+static int bcm6348_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6348_groups[group].pins; -+ *num_pins = bcm6348_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6348_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6348_funcs); -+} -+ -+static const char *bcm6348_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6348_funcs[selector].name; -+} -+ -+static int bcm6348_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6348_funcs[selector].groups; -+ *num_groups = bcm6348_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm6348_rmw_mux(struct bcm6348_pinctrl *pctl, u32 mask, u32 val) -+{ -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ -+ reg = __raw_readl(pctl->mode); -+ reg &= ~mask; -+ reg |= val & mask; -+ __raw_writel(reg, pctl->mode); -+ -+ spin_unlock_irqrestore(&pctl->lock, flags); -+} -+ -+static int bcm6348_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6348_pingroup *grp = &bcm6348_groups[group]; -+ const struct bcm6348_function *f = &bcm6348_funcs[selector]; -+ u32 mask, val; -+ -+ /* -+ * pins n..(n+7) share the same group, so we only need to look at -+ * the first pin. -+ */ -+ mask = GROUP_MASK(grp->pins[0]); -+ val = f->value << GROUP_SHIFT(grp->pins[0]); -+ -+ bcm6348_rmw_mux(pctl, mask, val); -+ -+ return 0; -+} -+ -+static int bcm6348_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6348_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ struct pin_desc *desc; -+ u32 mask; -+ -+ /* don't reconfigure if already muxed */ -+ desc = pin_desc_get(pctldev, offset); -+ if (desc->mux_usecount) -+ return 0; -+ -+ mask = GROUP_MASK(offset); -+ -+ /* disable all functions using this pin */ -+ bcm6348_rmw_mux(pctl, mask, 0); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6348_pctl_ops = { -+ .get_groups_count = bcm6348_pinctrl_get_group_count, -+ .get_group_name = bcm6348_pinctrl_get_group_name, -+ .get_group_pins = bcm6348_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif -+}; -+ -+static struct pinmux_ops bcm6348_pmx_ops = { -+ .get_functions_count = bcm6348_pinctrl_get_func_count, -+ .get_function_name = bcm6348_pinctrl_get_func_name, -+ .get_function_groups = bcm6348_pinctrl_get_groups, -+ .set_mux = bcm6348_pinctrl_set_mux, -+ .gpio_request_enable = bcm6348_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6348_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct bcm6348_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *mode; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); -+ -+ pctl->mode = mode; -+ -+ /* disable all muxes by default */ -+ __raw_writel(0, pctl->mode); -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6348_pctl_ops; -+ pctl->desc.pmxops = &bcm6348_pmx_ops; -+ -+ pctl->desc.npins = ARRAY_SIZE(bcm6348_pins); -+ pctl->desc.pins = bcm6348_pins; -+ -+ platform_set_drvdata(pdev, pctl); -+ -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6348_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6348_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6348-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6348_pinctrl_driver = { -+ .probe = bcm6348_pinctrl_probe, -+ .driver = { -+ .name = "bcm6348-pinctrl", -+ .of_match_table = bcm6348_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6348_pinctrl_driver); diff --git a/target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch deleted file mode 100644 index e8a7479915..0000000000 --- a/target/linux/bcm63xx/patches-4.14/135-Documentation-add-BCM6358-pincontroller-binding-docu.patch +++ /dev/null @@ -1,61 +0,0 @@ -From c7c8fa7f5b5ee9bea751fa7bdae8ff4acde8f26e Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 27 Jul 2016 11:36:00 +0200 -Subject: [PATCH 06/16] Documentation: add BCM6358 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6358 SoCs. - -Signed-off-by: Jonas Gorski ---- - .../bindings/pinctrl/brcm,bcm6358-pinctrl.txt | 44 ++++++++++++++++++++++ - 1 file changed, 44 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.txt -@@ -0,0 +1,44 @@ -+* Broadcom BCM6358 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6358-pinctrl". -+- reg: Register specifiers of dirout, dat registers. -+- reg-names: Must be "dirout", "dat". -+- brcm,gpiomode: Phandle to the shared gpiomode register. -+- gpio-controller: Identifies this node as a gpio-controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@fffe0080 { -+ compatible = "brcm,bcm6358-pinctrl"; -+ reg = <0xfffe0080 0x8>, -+ <0xfffe0088 0x8>, -+ <0xfffe0098 0x4>; -+ reg-names = "dirout", "dat"; -+ brcm,gpiomode = <&gpiomode>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+gpiomode: syscon@fffe0098 { -+ compatible = "brcm,bcm6358-gpiomode", "syscon"; -+ reg = <0xfffe0098 0x4>; -+ native-endian; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+ebi_cs_grp 30-31 ebi_cs -+uart1_grp 28-31 uart1 -+spi_cs_grp 32-33 spi_cs -+async_modem_grp 12-15 async_modem -+legacy_led_grp 9-15 legacy_led -+serial_led_grp 6-7 serial_led -+led_grp 0-3 led -+utopia_grp 12-15, 22-31 utopia -+pwm_syn_clk_grp 8 pwm_syn_clk -+sys_irq_grp 5 sys_irq diff --git a/target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch b/target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch deleted file mode 100644 index 87dc741e21..0000000000 --- a/target/linux/bcm63xx/patches-4.14/136-pinctrl-add-a-pincontrol-driver-for-BCM6358.patch +++ /dev/null @@ -1,436 +0,0 @@ -From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 24 Jun 2016 22:16:01 +0200 -Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358 - -Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different -functions onto the GPIO pins. It does not support configuring individual -pins but only whole groups. These groups may overlap, and still require -the directions to be set correctly in the GPIO register. In addition the -functions register controls other, not directly mux related functions. - -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm63xx/Kconfig | 8 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++ - 3 files changed, 402 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c - ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -15,3 +15,11 @@ config PINCTRL_BCM6348 - select PINCONF - select PINCTRL_BCM63XX - select GENERIC_PINCONF -+ -+config PINCTRL_BCM6358 -+ bool "BCM6358 pincontrol driver" if COMPILE_TEST -+ select PINMUX -+ select PINCONF -+ select PINCTRL_BCM63XX -+ select GENERIC_PINCONF -+ select MFD_SYSCON ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o -+obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c -@@ -0,0 +1,393 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#include "pinctrl-bcm63xx.h" -+ -+/* GPIO_MODE register */ -+#define BCM6358_MODE_MUX_NONE 0 -+ -+/* overlays on gpio pins */ -+#define BCM6358_MODE_MUX_EBI_CS BIT(5) -+#define BCM6358_MODE_MUX_UART1 BIT(6) -+#define BCM6358_MODE_MUX_SPI_CS BIT(7) -+#define BCM6358_MODE_MUX_ASYNC_MODEM BIT(8) -+#define BCM6358_MODE_MUX_LEGACY_LED BIT(9) -+#define BCM6358_MODE_MUX_SERIAL_LED BIT(10) -+#define BCM6358_MODE_MUX_LED BIT(11) -+#define BCM6358_MODE_MUX_UTOPIA BIT(12) -+#define BCM6358_MODE_MUX_CLKRST BIT(13) -+#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14) -+#define BCM6358_MODE_MUX_SYS_IRQ BIT(15) -+ -+#define BCM6358_NGPIO 40 -+ -+struct bcm6358_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+ -+ const u16 mode_val; -+ -+ /* non-GPIO function muxes require the gpio direction to be set */ -+ const u16 direction; -+}; -+ -+struct bcm6358_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+}; -+ -+struct bcm6358_pinctrl { -+ struct device *dev; -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ struct regmap_field *overlays; -+ -+ struct gpio_chip gpio[2]; -+}; -+ -+#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 | \ -+ BCM6358_MODE_MUX_##bit2 | \ -+ BCM6358_MODE_MUX_##bit3), \ -+ } -+ -+static const struct pinctrl_pin_desc bcm6358_pins[] = { -+ BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE), -+ BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE), -+ BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE), -+ BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE), -+ PINCTRL_PIN(4, "gpio4"), -+ BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE), -+ BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE), -+ BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE), -+ BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA), -+ BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA), -+ BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA), -+ BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE), -+ BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE), -+ BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE), -+ BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS), -+ BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS), -+ BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE), -+ BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+ PINCTRL_PIN(38, "gpio38"), -+ PINCTRL_PIN(39, "gpio39"), -+}; -+ -+static unsigned ebi_cs_grp_pins[] = { 30, 31 }; -+ -+static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 }; -+ -+static unsigned spi_cs_grp_pins[] = { 32, 33 }; -+ -+static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 }; -+ -+static unsigned serial_led_grp_pins[] = { 6, 7 }; -+ -+static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 }; -+ -+static unsigned led_grp_pins[] = { 0, 1, 2, 3 }; -+ -+static unsigned utopia_grp_pins[] = { -+ 12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, -+}; -+ -+static unsigned pwm_syn_clk_grp_pins[] = { 8 }; -+ -+static unsigned sys_irq_grp_pins[] = { 5 }; -+ -+#define BCM6358_GPIO_MUX_GROUP(n, bit, dir) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ .mode_val = BCM6358_MODE_MUX_##bit, \ -+ .direction = dir, \ -+ } -+ -+static const struct bcm6358_pingroup bcm6358_groups[] = { -+ BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3), -+ BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2), -+ BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6), -+ BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6), -+ BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f), -+ BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3), -+ BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf), -+ BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f), -+ BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1), -+ BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1), -+}; -+ -+static const char * const ebi_cs_groups[] = { -+ "ebi_cs_grp" -+}; -+ -+static const char * const uart1_groups[] = { -+ "uart1_grp" -+}; -+ -+static const char * const spi_cs_2_3_groups[] = { -+ "spi_cs_2_3_grp" -+}; -+ -+static const char * const async_modem_groups[] = { -+ "async_modem_grp" -+}; -+ -+static const char * const legacy_led_groups[] = { -+ "legacy_led_grp", -+}; -+ -+static const char * const serial_led_groups[] = { -+ "serial_led_grp", -+}; -+ -+static const char * const led_groups[] = { -+ "led_grp", -+}; -+ -+static const char * const clkrst_groups[] = { -+ "clkrst_grp", -+}; -+ -+static const char * const pwm_syn_clk_groups[] = { -+ "pwm_syn_clk_grp", -+}; -+ -+static const char * const sys_irq_groups[] = { -+ "sys_irq_grp", -+}; -+ -+#define BCM6358_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ } -+ -+static const struct bcm6358_function bcm6358_funcs[] = { -+ BCM6358_FUN(ebi_cs), -+ BCM6358_FUN(uart1), -+ BCM6358_FUN(spi_cs_2_3), -+ BCM6358_FUN(async_modem), -+ BCM6358_FUN(legacy_led), -+ BCM6358_FUN(serial_led), -+ BCM6358_FUN(led), -+ BCM6358_FUN(clkrst), -+ BCM6358_FUN(pwm_syn_clk), -+ BCM6358_FUN(sys_irq), -+}; -+ -+static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6358_groups); -+} -+ -+static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6358_groups[group].name; -+} -+ -+static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6358_groups[group].pins; -+ *num_pins = bcm6358_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6358_funcs); -+} -+ -+static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6358_funcs[selector].name; -+} -+ -+static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6358_funcs[selector].groups; -+ *num_groups = bcm6358_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6358_pingroup *grp = &bcm6358_groups[group]; -+ u32 val = grp->mode_val; -+ u32 mask = val; -+ unsigned pin; -+ -+ for (pin = 0; pin < grp->num_pins; pin++) -+ mask |= (unsigned long)bcm6358_pins[pin].drv_data; -+ -+ regmap_field_update_bits(pctl->overlays, mask, val); -+ -+ for (pin = 0; pin < grp->num_pins; pin++) { -+ int hw_gpio = bcm6358_pins[pin].number; -+ struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32]; -+ -+ if (grp->direction & BIT(pin)) -+ gc->direction_output(gc, hw_gpio % 32, 0); -+ else -+ gc->direction_input(gc, hw_gpio % 32); -+ } -+ -+ return 0; -+} -+ -+static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ u32 mask; -+ -+ mask = (unsigned long)bcm6358_pins[offset].drv_data; -+ if (!mask) -+ return 0; -+ -+ /* disable all functions using this pin */ -+ return regmap_field_update_bits(pctl->overlays, mask, 0); -+} -+ -+static struct pinctrl_ops bcm6358_pctl_ops = { -+ .get_groups_count = bcm6358_pinctrl_get_group_count, -+ .get_group_name = bcm6358_pinctrl_get_group_name, -+ .get_group_pins = bcm6358_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif -+}; -+ -+static struct pinmux_ops bcm6358_pmx_ops = { -+ .get_functions_count = bcm6358_pinctrl_get_func_count, -+ .get_function_name = bcm6358_pinctrl_get_func_name, -+ .get_function_groups = bcm6358_pinctrl_get_groups, -+ .set_mux = bcm6358_pinctrl_set_mux, -+ .gpio_request_enable = bcm6358_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6358_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct bcm6358_pinctrl *pctl; -+ struct regmap *mode; -+ struct reg_field overlays = REG_FIELD(0, 0, 15); -+ -+ if (pdev->dev.of_node) -+ mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, -+ "brcm,gpiomode"); -+ else -+ mode = syscon_regmap_lookup_by_pdevname("syscon.fffe0098"); -+ -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays); -+ if (IS_ERR(pctl->overlays)) -+ return PTR_ERR(pctl->overlays); -+ -+ /* disable all muxes by default */ -+ regmap_field_write(pctl->overlays, 0); -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6358_pctl_ops; -+ pctl->desc.pmxops = &bcm6358_pmx_ops; -+ -+ pctl->desc.npins = ARRAY_SIZE(bcm6358_pins); -+ pctl->desc.pins = bcm6358_pins; -+ -+ platform_set_drvdata(pdev, pctl); -+ -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6358_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6358_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6358-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6358_pinctrl_driver = { -+ .probe = bcm6358_pinctrl_probe, -+ .driver = { -+ .name = "bcm6358-pinctrl", -+ .of_match_table = bcm6358_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6358_pinctrl_driver); diff --git a/target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch deleted file mode 100644 index 9fc424cb4c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/137-Documentation-add-BCM6362-pincontroller-binding-docu.patch +++ /dev/null @@ -1,96 +0,0 @@ -From ba03ea8ada2ca71c9095d96a1e4085c2c5cf0e69 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 27 Jul 2016 11:36:18 +0200 -Subject: [PATCH 08/16] Documentation: add BCM6362 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6362 SoCs. - -Signed-off-by: Jonas Gorski ---- - .../bindings/pinctrl/brcm,bcm6362-pinctrl.txt | 79 ++++++++++++++++++++++ - 1 file changed, 79 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.txt -@@ -0,0 +1,79 @@ -+* Broadcom BCM6362 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6362-pinctrl" -+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers. -+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode". -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@10000080 { -+ compatible = "brcm,bcm6362-pinctrl"; -+ reg = <0x10000080 0x8>, -+ <0x10000088 0x8>, -+ <0x10000090 0x4>, -+ <0x10000098 0x4>, -+ <0x1000009c 0x4>, -+ <0x100000b8 0x4>; -+ reg-names = "dirout", "dat", "led", -+ "mode", "ctrl", "basemode"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 led, usb_device_led -+gpio1 1 led, sys_irq -+gpio2 2 led, serial_led_clk -+gpio3 3 led, serial_led_data -+gpio4 4 led, robosw_led_data -+gpio5 5 led, robosw_led_clk -+gpio6 6 led, robosw_led0 -+gpio7 7 led, robosw_led1 -+gpio8 8 led, inet_led -+gpio9 9 led, spi_cs2 -+gpio10 10 led, spi_cs3 -+gpio11 11 led, ntr_pulse -+gpio12 12 led, uart1_scts -+gpio13 13 led, uart1_srts -+gpio14 14 led, uart1_sdin -+gpio15 15 led, uart1_sdout -+gpio16 16 led, adsl_spi_miso -+gpio17 17 led, adsl_spi_mosi -+gpio18 18 led, adsl_spi_clk -+gpio19 19 led, adsl_spi_cs -+gpio20 20 led, ephy0_led -+gpio21 21 led, ephy1_led -+gpio22 22 led, ephy2_led -+gpio23 23 led, ephy3_led -+gpio24 24 ext_irq0 -+gpio25 25 ext_irq1 -+gpio26 26 ext_irq2 -+gpio27 27 ext_irq3 -+gpio28 28 - -+gpio29 29 - -+gpio30 30 - -+gpio31 31 - -+gpio32 32 wifi -+gpio33 33 wifi -+gpio34 34 wifi -+gpio35 35 wifi -+gpio36 36 wifi -+gpio37 37 wifi -+gpio38 38 wifi -+gpio39 39 wifi -+gpio40 40 wifi -+gpio41 41 wifi -+gpio42 42 wifi -+gpio43 43 wifi -+gpio44 44 wifi -+gpio45 45 wifi -+gpio46 46 wifi -+gpio47 47 wifi -+nand_grp 8, 12-23, 27 nand diff --git a/target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch b/target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch deleted file mode 100644 index 726a97f245..0000000000 --- a/target/linux/bcm63xx/patches-4.14/138-pinctrl-add-a-pincontrol-driver-for-BCM6362.patch +++ /dev/null @@ -1,733 +0,0 @@ -From eea6b96701d734095e2f823f3a82d9b063f553ae Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 24 Jun 2016 22:17:20 +0200 -Subject: [PATCH 09/16] pinctrl: add a pincontrol driver for BCM6362 - -Add a pincotrol driver for BCM6362. BCM6362 allows muxing individual -GPIO pins to the LED controller, to be available by the integrated -wifi, or other functions. It also supports overlay groups, of which -only NAND is documented. - -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm63xx/Kconfig | 7 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c | 692 ++++++++++++++++++++++++++++++ - 3 files changed, 700 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c - ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -23,3 +23,10 @@ config PINCTRL_BCM6358 - select PINCTRL_BCM63XX - select GENERIC_PINCONF - select MFD_SYSCON -+ -+config PINCTRL_BCM6362 -+ bool "BCM6362 pincontrol driver" if COMPILE_TEST -+ select PINMUX -+ select PINCONF -+ select PINCTRL_BCM63XX -+ select GENERIC_PINCONF ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -2,3 +2,4 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o -+obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6362.c -@@ -0,0 +1,692 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#include "pinctrl-bcm63xx.h" -+ -+#define BCM6362_NGPIO 48 -+ -+/* GPIO_BASEMODE register */ -+#define BASEMODE_NAND BIT(2) -+ -+enum bcm6362_pinctrl_reg { -+ BCM6362_LEDCTRL, -+ BCM6362_MODE, -+ BCM6362_CTRL, -+ BCM6362_BASEMODE, -+}; -+ -+struct bcm6362_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6362_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ enum bcm6362_pinctrl_reg reg; -+ u32 basemode_mask; -+}; -+ -+struct bcm6362_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *led; -+ void __iomem *mode; -+ void __iomem *ctrl; -+ void __iomem *basemode; -+ -+ /* register access lock */ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio[2]; -+}; -+ -+#define BCM6362_PIN(a, b, mask) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)(mask), \ -+ } -+ -+static const struct pinctrl_pin_desc bcm6362_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ PINCTRL_PIN(2, "gpio2"), -+ PINCTRL_PIN(3, "gpio3"), -+ PINCTRL_PIN(4, "gpio4"), -+ PINCTRL_PIN(5, "gpio5"), -+ PINCTRL_PIN(6, "gpio6"), -+ PINCTRL_PIN(7, "gpio7"), -+ BCM6362_PIN(8, "gpio8", BASEMODE_NAND), -+ PINCTRL_PIN(9, "gpio9"), -+ PINCTRL_PIN(10, "gpio10"), -+ PINCTRL_PIN(11, "gpio11"), -+ BCM6362_PIN(12, "gpio12", BASEMODE_NAND), -+ BCM6362_PIN(13, "gpio13", BASEMODE_NAND), -+ BCM6362_PIN(14, "gpio14", BASEMODE_NAND), -+ BCM6362_PIN(15, "gpio15", BASEMODE_NAND), -+ BCM6362_PIN(16, "gpio16", BASEMODE_NAND), -+ BCM6362_PIN(17, "gpio17", BASEMODE_NAND), -+ BCM6362_PIN(18, "gpio18", BASEMODE_NAND), -+ BCM6362_PIN(19, "gpio19", BASEMODE_NAND), -+ BCM6362_PIN(20, "gpio20", BASEMODE_NAND), -+ BCM6362_PIN(21, "gpio21", BASEMODE_NAND), -+ BCM6362_PIN(22, "gpio22", BASEMODE_NAND), -+ BCM6362_PIN(23, "gpio23", BASEMODE_NAND), -+ PINCTRL_PIN(24, "gpio24"), -+ PINCTRL_PIN(25, "gpio25"), -+ PINCTRL_PIN(26, "gpio26"), -+ BCM6362_PIN(27, "gpio27", BASEMODE_NAND), -+ PINCTRL_PIN(28, "gpio28"), -+ PINCTRL_PIN(29, "gpio29"), -+ PINCTRL_PIN(30, "gpio30"), -+ PINCTRL_PIN(31, "gpio31"), -+ PINCTRL_PIN(32, "gpio32"), -+ PINCTRL_PIN(33, "gpio33"), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+ PINCTRL_PIN(38, "gpio38"), -+ PINCTRL_PIN(39, "gpio39"), -+ PINCTRL_PIN(40, "gpio40"), -+ PINCTRL_PIN(41, "gpio41"), -+ PINCTRL_PIN(42, "gpio42"), -+ PINCTRL_PIN(43, "gpio43"), -+ PINCTRL_PIN(44, "gpio44"), -+ PINCTRL_PIN(45, "gpio45"), -+ PINCTRL_PIN(46, "gpio46"), -+ PINCTRL_PIN(47, "gpio47"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+static unsigned gpio32_pins[] = { 32 }; -+static unsigned gpio33_pins[] = { 33 }; -+static unsigned gpio34_pins[] = { 34 }; -+static unsigned gpio35_pins[] = { 35 }; -+static unsigned gpio36_pins[] = { 36 }; -+static unsigned gpio37_pins[] = { 37 }; -+static unsigned gpio38_pins[] = { 38 }; -+static unsigned gpio39_pins[] = { 39 }; -+static unsigned gpio40_pins[] = { 40 }; -+static unsigned gpio41_pins[] = { 41 }; -+static unsigned gpio42_pins[] = { 42 }; -+static unsigned gpio43_pins[] = { 43 }; -+static unsigned gpio44_pins[] = { 44 }; -+static unsigned gpio45_pins[] = { 45 }; -+static unsigned gpio46_pins[] = { 46 }; -+static unsigned gpio47_pins[] = { 47 }; -+ -+static unsigned nand_grp_pins[] = { -+ 8, 12, 13, 14, 15, 16, 17, -+ 18, 19, 20, 21, 22, 23, 27, -+}; -+ -+#define BCM6362_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm6362_pingroup bcm6362_groups[] = { -+ BCM6362_GROUP(gpio0), -+ BCM6362_GROUP(gpio1), -+ BCM6362_GROUP(gpio2), -+ BCM6362_GROUP(gpio3), -+ BCM6362_GROUP(gpio4), -+ BCM6362_GROUP(gpio5), -+ BCM6362_GROUP(gpio6), -+ BCM6362_GROUP(gpio7), -+ BCM6362_GROUP(gpio8), -+ BCM6362_GROUP(gpio9), -+ BCM6362_GROUP(gpio10), -+ BCM6362_GROUP(gpio11), -+ BCM6362_GROUP(gpio12), -+ BCM6362_GROUP(gpio13), -+ BCM6362_GROUP(gpio14), -+ BCM6362_GROUP(gpio15), -+ BCM6362_GROUP(gpio16), -+ BCM6362_GROUP(gpio17), -+ BCM6362_GROUP(gpio18), -+ BCM6362_GROUP(gpio19), -+ BCM6362_GROUP(gpio20), -+ BCM6362_GROUP(gpio21), -+ BCM6362_GROUP(gpio22), -+ BCM6362_GROUP(gpio23), -+ BCM6362_GROUP(gpio24), -+ BCM6362_GROUP(gpio25), -+ BCM6362_GROUP(gpio26), -+ BCM6362_GROUP(gpio27), -+ BCM6362_GROUP(gpio28), -+ BCM6362_GROUP(gpio29), -+ BCM6362_GROUP(gpio30), -+ BCM6362_GROUP(gpio31), -+ BCM6362_GROUP(gpio32), -+ BCM6362_GROUP(gpio33), -+ BCM6362_GROUP(gpio34), -+ BCM6362_GROUP(gpio35), -+ BCM6362_GROUP(gpio36), -+ BCM6362_GROUP(gpio37), -+ BCM6362_GROUP(gpio38), -+ BCM6362_GROUP(gpio39), -+ BCM6362_GROUP(gpio40), -+ BCM6362_GROUP(gpio41), -+ BCM6362_GROUP(gpio42), -+ BCM6362_GROUP(gpio43), -+ BCM6362_GROUP(gpio44), -+ BCM6362_GROUP(gpio45), -+ BCM6362_GROUP(gpio46), -+ BCM6362_GROUP(gpio47), -+ BCM6362_GROUP(nand_grp), -+}; -+ -+static const char * const led_groups[] = { -+ "gpio0", -+ "gpio1", -+ "gpio2", -+ "gpio3", -+ "gpio4", -+ "gpio5", -+ "gpio6", -+ "gpio7", -+ "gpio8", -+ "gpio9", -+ "gpio10", -+ "gpio11", -+ "gpio12", -+ "gpio13", -+ "gpio14", -+ "gpio15", -+ "gpio16", -+ "gpio17", -+ "gpio18", -+ "gpio19", -+ "gpio20", -+ "gpio21", -+ "gpio22", -+ "gpio23", -+}; -+ -+static const char * const usb_device_led_groups[] = { -+ "gpio0", -+}; -+ -+static const char * const sys_irq_groups[] = { -+ "gpio1", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio2", -+}; -+ -+static const char * const serial_led_data_groups[] = { -+ "gpio3", -+}; -+ -+static const char * const robosw_led_data_groups[] = { -+ "gpio4", -+}; -+ -+static const char * const robosw_led_clk_groups[] = { -+ "gpio5", -+}; -+ -+static const char * const robosw_led0_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const robosw_led1_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const inet_led_groups[] = { -+ "gpio8", -+}; -+ -+static const char * const spi_cs2_groups[] = { -+ "gpio9", -+}; -+ -+static const char * const spi_cs3_groups[] = { -+ "gpio10", -+}; -+ -+static const char * const ntr_pulse_groups[] = { -+ "gpio11", -+}; -+ -+static const char * const uart1_scts_groups[] = { -+ "gpio12", -+}; -+ -+static const char * const uart1_srts_groups[] = { -+ "gpio13", -+}; -+ -+static const char * const uart1_sdin_groups[] = { -+ "gpio14", -+}; -+ -+static const char * const uart1_sdout_groups[] = { -+ "gpio15", -+}; -+ -+static const char * const adsl_spi_miso_groups[] = { -+ "gpio16", -+}; -+ -+static const char * const adsl_spi_mosi_groups[] = { -+ "gpio17", -+}; -+ -+static const char * const adsl_spi_clk_groups[] = { -+ "gpio18", -+}; -+ -+static const char * const adsl_spi_cs_groups[] = { -+ "gpio19", -+}; -+ -+static const char * const ephy0_led_groups[] = { -+ "gpio20", -+}; -+ -+static const char * const ephy1_led_groups[] = { -+ "gpio21", -+}; -+ -+static const char * const ephy2_led_groups[] = { -+ "gpio22", -+}; -+ -+static const char * const ephy3_led_groups[] = { -+ "gpio23", -+}; -+ -+static const char * const ext_irq0_groups[] = { -+ "gpio24", -+}; -+ -+static const char * const ext_irq1_groups[] = { -+ "gpio25", -+}; -+ -+static const char * const ext_irq2_groups[] = { -+ "gpio26", -+}; -+ -+static const char * const ext_irq3_groups[] = { -+ "gpio27", -+}; -+ -+static const char * const wifi_groups[] = { -+ "gpio32", -+ "gpio33", -+ "gpio34", -+ "gpio35", -+ "gpio36", -+ "gpio37", -+ "gpio38", -+ "gpio39", -+ "gpio40", -+ "gpio41", -+ "gpio42", -+ "gpio43", -+ "gpio44", -+ "gpio45", -+ "gpio46", -+ "gpio47", -+}; -+ -+static const char * const nand_groups[] = { -+ "nand_grp", -+}; -+ -+#define BCM6362_LED_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM6362_LEDCTRL, \ -+ } -+ -+#define BCM6362_MODE_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM6362_MODE, \ -+ } -+ -+#define BCM6362_CTRL_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM6362_CTRL, \ -+ } -+ -+#define BCM6362_BASEMODE_FUN(n, mask) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM6362_BASEMODE, \ -+ .basemode_mask = (mask), \ -+ } -+ -+static const struct bcm6362_function bcm6362_funcs[] = { -+ BCM6362_LED_FUN(led), -+ BCM6362_MODE_FUN(usb_device_led), -+ BCM6362_MODE_FUN(sys_irq), -+ BCM6362_MODE_FUN(serial_led_clk), -+ BCM6362_MODE_FUN(serial_led_data), -+ BCM6362_MODE_FUN(robosw_led_data), -+ BCM6362_MODE_FUN(robosw_led_clk), -+ BCM6362_MODE_FUN(robosw_led0), -+ BCM6362_MODE_FUN(robosw_led1), -+ BCM6362_MODE_FUN(inet_led), -+ BCM6362_MODE_FUN(spi_cs2), -+ BCM6362_MODE_FUN(spi_cs3), -+ BCM6362_MODE_FUN(ntr_pulse), -+ BCM6362_MODE_FUN(uart1_scts), -+ BCM6362_MODE_FUN(uart1_srts), -+ BCM6362_MODE_FUN(uart1_sdin), -+ BCM6362_MODE_FUN(uart1_sdout), -+ BCM6362_MODE_FUN(adsl_spi_miso), -+ BCM6362_MODE_FUN(adsl_spi_mosi), -+ BCM6362_MODE_FUN(adsl_spi_clk), -+ BCM6362_MODE_FUN(adsl_spi_cs), -+ BCM6362_MODE_FUN(ephy0_led), -+ BCM6362_MODE_FUN(ephy1_led), -+ BCM6362_MODE_FUN(ephy2_led), -+ BCM6362_MODE_FUN(ephy3_led), -+ BCM6362_MODE_FUN(ext_irq0), -+ BCM6362_MODE_FUN(ext_irq1), -+ BCM6362_MODE_FUN(ext_irq2), -+ BCM6362_MODE_FUN(ext_irq3), -+ BCM6362_CTRL_FUN(wifi), -+ BCM6362_BASEMODE_FUN(nand, BASEMODE_NAND), -+}; -+ -+static int bcm6362_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6362_groups); -+} -+ -+static const char *bcm6362_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6362_groups[group].name; -+} -+ -+static int bcm6362_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6362_groups[group].pins; -+ *num_pins = bcm6362_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6362_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6362_funcs); -+} -+ -+static const char *bcm6362_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6362_funcs[selector].name; -+} -+ -+static int bcm6362_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6362_funcs[selector].groups; -+ *num_groups = bcm6362_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm6362_rmw_mux(struct bcm6362_pinctrl *pctl, void __iomem *reg, -+ u32 mask, u32 val) -+{ -+ unsigned long flags; -+ u32 tmp; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ tmp = __raw_readl(reg); -+ tmp &= ~mask; -+ tmp |= val & mask; -+ __raw_writel(tmp, reg); -+ -+ spin_unlock_irqrestore(&pctl->lock, flags); -+} -+ -+static void bcm6362_set_gpio(struct bcm6362_pinctrl *pctl, unsigned pin) -+{ -+ const struct pinctrl_pin_desc *desc = &bcm6362_pins[pin]; -+ u32 mask = BIT(pin % 32); -+ -+ if (desc->drv_data) -+ bcm6362_rmw_mux(pctl, pctl->basemode, (u32)desc->drv_data, 0); -+ -+ if (pin < 32) { -+ /* base mode 0 => gpio 1 => mux function */ -+ bcm6362_rmw_mux(pctl, pctl->mode, mask, 0); -+ -+ /* pins 0-23 might be muxed to led */ -+ if (pin < 24) -+ bcm6362_rmw_mux(pctl, pctl->led, mask, 0); -+ } else { -+ /* ctrl reg 0 => wifi function 1 => gpio */ -+ bcm6362_rmw_mux(pctl, pctl->ctrl, mask, mask); -+ } -+} -+ -+static int bcm6362_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6362_pingroup *grp = &bcm6362_groups[group]; -+ const struct bcm6362_function *f = &bcm6362_funcs[selector]; -+ unsigned i; -+ void __iomem *reg; -+ u32 val, mask; -+ -+ for (i = 0; i < grp->num_pins; i++) -+ bcm6362_set_gpio(pctl, grp->pins[i]); -+ -+ switch (f->reg) { -+ case BCM6362_LEDCTRL: -+ reg = pctl->led; -+ mask = BIT(grp->pins[0]); -+ val = BIT(grp->pins[0]); -+ break; -+ case BCM6362_MODE: -+ reg = pctl->ctrl; -+ mask = BIT(grp->pins[0]); -+ val = BIT(grp->pins[0]); -+ break; -+ case BCM6362_CTRL: -+ reg = pctl->ctrl; -+ mask = BIT(grp->pins[0]); -+ val = 0; -+ break; -+ case BCM6362_BASEMODE: -+ reg = pctl->basemode; -+ mask = f->basemode_mask; -+ val = f->basemode_mask; -+ break; -+ default: -+ WARN_ON(1); -+ return -EINVAL; -+ } -+ -+ bcm6362_rmw_mux(pctl, reg, mask, val); -+ -+ return 0; -+} -+ -+static int bcm6362_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6362_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable all functions using this pin */ -+ bcm6362_set_gpio(pctl, offset); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6362_pctl_ops = { -+ .get_groups_count = bcm6362_pinctrl_get_group_count, -+ .get_group_name = bcm6362_pinctrl_get_group_name, -+ .get_group_pins = bcm6362_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif -+}; -+ -+static struct pinmux_ops bcm6362_pmx_ops = { -+ .get_functions_count = bcm6362_pinctrl_get_func_count, -+ .get_function_name = bcm6362_pinctrl_get_func_name, -+ .get_function_groups = bcm6362_pinctrl_get_groups, -+ .set_mux = bcm6362_pinctrl_set_mux, -+ .gpio_request_enable = bcm6362_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6362_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct bcm6362_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *led, *mode, *ctrl, *basemode; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led"); -+ led = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(led)) -+ return PTR_ERR(led); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); -+ ctrl = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(ctrl)) -+ return PTR_ERR(ctrl); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode"); -+ basemode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(basemode)) -+ return PTR_ERR(basemode); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); -+ -+ pctl->led = led; -+ pctl->mode = mode; -+ pctl->ctrl = ctrl; -+ pctl->basemode = basemode; -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6362_pctl_ops; -+ pctl->desc.pmxops = &bcm6362_pmx_ops; -+ -+ pctl->desc.npins = ARRAY_SIZE(bcm6362_pins); -+ pctl->desc.pins = bcm6362_pins; -+ -+ platform_set_drvdata(pdev, pctl); -+ -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6362_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6362_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6362-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6362_pinctrl_driver = { -+ .probe = bcm6362_pinctrl_probe, -+ .driver = { -+ .name = "bcm6362-pinctrl", -+ .of_match_table = bcm6362_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6362_pinctrl_driver); diff --git a/target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch deleted file mode 100644 index e0a698fc12..0000000000 --- a/target/linux/bcm63xx/patches-4.14/139-Documentation-add-BCM6368-pincontroller-binding-docu.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 30594cf9bfff176a9e4b14c50dcd8b9d0cc3edec Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 27 Jul 2016 11:36:51 +0200 -Subject: [PATCH 10/16] Documentation: add BCM6368 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6368 SoCs. - -Signed-off-by: Jonas Gorski ---- - .../bindings/pinctrl/brcm,bcm6368-pinctrl.txt | 67 ++++++++++++++++++++++ - 1 file changed, 67 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.txt -@@ -0,0 +1,67 @@ -+* Broadcom BCM6368 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6368-pinctrl". -+- reg: Register specifiers of dirout, dat, mode registers. -+- reg-names: Must be "dirout", "dat", "mode". -+- brcm,gpiobasemode: Phandle to the gpio basemode register. -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@10000080 { -+ compatible = "brcm,bcm6368-pinctrl"; -+ reg = <0x10000080 0x08>, -+ <0x10000088 0x08>, -+ <0x10000098 0x04>; -+ reg-names = "dirout", "dat", "mode"; -+ brcm,gpiobasemode = <&gpiobasemode>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+gpiobasemode: syscon@100000b8 { -+ compatible = "brcm,bcm6368-gpiobasemode", "syscon"; -+ reg = <0x100000b8 4>; -+ native-endian; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 analog_afe0 -+gpio1 1 analog_afe1 -+gpio2 2 sys_irq -+gpio3 3 serial_led_data -+gpio4 4 serial_led_clk -+gpio5 5 inet_led -+gpio6 6 ephy0_led -+gpio7 7 ephy1_led -+gpio8 8 ephy2_led -+gpio9 9 ephy3_led -+gpio10 10 robosw_led_data -+gpio11 11 robosw_led_clk -+gpio12 12 robosw_led0 -+gpio13 13 robosw_led1 -+gpio14 14 usb_device_led -+gpio15 15 - -+gpio16 16 pci_req1 -+gpio17 17 pci_gnt1 -+gpio18 18 pci_intb -+gpio19 19 pci_req0 -+gpio20 20 pci_gnt0 -+gpio21 21 - -+gpio22 22 pcmcia_cd1 -+gpio23 23 pcmcia_cd2 -+gpio24 24 pcmcia_vs1 -+gpio25 25 pcmcia_vs2 -+gpio26 26 ebi_cs2 -+gpio27 27 ebi_cs3 -+gpio28 28 spi_cs2 -+gpio29 29 spi_cs3 -+gpio30 30 spi_cs4 -+gpio31 31 spi_cs5 -+uart1_grp 30-33 uart1 diff --git a/target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch b/target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch deleted file mode 100644 index 6a9b9e0807..0000000000 --- a/target/linux/bcm63xx/patches-4.14/140-pinctrl-add-a-pincontrol-driver-for-BCM6368.patch +++ /dev/null @@ -1,620 +0,0 @@ -From 90be3cb4f1a45b8be4a4ec264cd66c2f8e893fcb Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 24 Jun 2016 22:18:25 +0200 -Subject: [PATCH 11/16] pinctrl: add a pincontrol driver for BCM6368 - -Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32 -GPIOs onto alternative functions. Not all are documented. - -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm63xx/Kconfig | 15 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c | 573 ++++++++++++++++++++++++++++++ - 3 files changed, 589 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c - ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -30,3 +30,18 @@ config PINCTRL_BCM6362 - select PINCONF - select PINCTRL_BCM63XX - select GENERIC_PINCONF -+ -+config PINCTRL_BCM6368 -+ bool "BCM6368 pincontrol driver" if COMPILE_TEST -+ select PINMUX -+ select PINCONF -+ select PINCTRL_BCM63XX -+ select GENERIC_PINCONF -+ select MFD_SYSCON -+ -+config PINCTRL_BCM63268 -+ bool "BCM63268 pincontrol driver" if COMPILE_TEST -+ select PINMUX -+ select PINCONF -+ select PINCTRL_BCM63XX -+ select GENERIC_PINCONF ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -3,3 +3,4 @@ obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl - obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o -+obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6368.c -@@ -0,0 +1,573 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#include "pinctrl-bcm63xx.h" -+ -+#define BCM6368_NGPIO 38 -+ -+#define BCM6368_BASEMODE_MASK 0x7 -+#define BCM6368_BASEMODE_GPIO 0x0 -+#define BCM6368_BASEMODE_UART1 0x1 -+ -+struct bcm6368_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6368_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ unsigned dir_out:16; -+ unsigned basemode:3; -+}; -+ -+struct bcm6368_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *mode; -+ struct regmap_field *overlay; -+ -+ /* register access lock */ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio[2]; -+}; -+ -+#define BCM6368_BASEMODE_PIN(a, b) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)true \ -+ } -+ -+static const struct pinctrl_pin_desc bcm6368_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ PINCTRL_PIN(2, "gpio2"), -+ PINCTRL_PIN(3, "gpio3"), -+ PINCTRL_PIN(4, "gpio4"), -+ PINCTRL_PIN(5, "gpio5"), -+ PINCTRL_PIN(6, "gpio6"), -+ PINCTRL_PIN(7, "gpio7"), -+ PINCTRL_PIN(8, "gpio8"), -+ PINCTRL_PIN(9, "gpio9"), -+ PINCTRL_PIN(10, "gpio10"), -+ PINCTRL_PIN(11, "gpio11"), -+ PINCTRL_PIN(12, "gpio12"), -+ PINCTRL_PIN(13, "gpio13"), -+ PINCTRL_PIN(14, "gpio14"), -+ PINCTRL_PIN(15, "gpio15"), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ PINCTRL_PIN(22, "gpio22"), -+ PINCTRL_PIN(23, "gpio23"), -+ PINCTRL_PIN(24, "gpio24"), -+ PINCTRL_PIN(25, "gpio25"), -+ PINCTRL_PIN(26, "gpio26"), -+ PINCTRL_PIN(27, "gpio27"), -+ PINCTRL_PIN(28, "gpio28"), -+ PINCTRL_PIN(29, "gpio29"), -+ BCM6368_BASEMODE_PIN(30, "gpio30"), -+ BCM6368_BASEMODE_PIN(31, "gpio31"), -+ BCM6368_BASEMODE_PIN(32, "gpio32"), -+ BCM6368_BASEMODE_PIN(33, "gpio33"), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 }; -+ -+#define BCM6368_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm6368_pingroup bcm6368_groups[] = { -+ BCM6368_GROUP(gpio0), -+ BCM6368_GROUP(gpio1), -+ BCM6368_GROUP(gpio2), -+ BCM6368_GROUP(gpio3), -+ BCM6368_GROUP(gpio4), -+ BCM6368_GROUP(gpio5), -+ BCM6368_GROUP(gpio6), -+ BCM6368_GROUP(gpio7), -+ BCM6368_GROUP(gpio8), -+ BCM6368_GROUP(gpio9), -+ BCM6368_GROUP(gpio10), -+ BCM6368_GROUP(gpio11), -+ BCM6368_GROUP(gpio12), -+ BCM6368_GROUP(gpio13), -+ BCM6368_GROUP(gpio14), -+ BCM6368_GROUP(gpio15), -+ BCM6368_GROUP(gpio16), -+ BCM6368_GROUP(gpio17), -+ BCM6368_GROUP(gpio18), -+ BCM6368_GROUP(gpio19), -+ BCM6368_GROUP(gpio20), -+ BCM6368_GROUP(gpio21), -+ BCM6368_GROUP(gpio22), -+ BCM6368_GROUP(gpio23), -+ BCM6368_GROUP(gpio24), -+ BCM6368_GROUP(gpio25), -+ BCM6368_GROUP(gpio26), -+ BCM6368_GROUP(gpio27), -+ BCM6368_GROUP(gpio28), -+ BCM6368_GROUP(gpio29), -+ BCM6368_GROUP(gpio30), -+ BCM6368_GROUP(gpio31), -+ BCM6368_GROUP(uart1_grp), -+}; -+ -+static const char * const analog_afe_0_groups[] = { -+ "gpio0", -+}; -+ -+static const char * const analog_afe_1_groups[] = { -+ "gpio1", -+}; -+ -+static const char * const sys_irq_groups[] = { -+ "gpio2", -+}; -+ -+static const char * const serial_led_data_groups[] = { -+ "gpio3", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio4", -+}; -+ -+static const char * const inet_led_groups[] = { -+ "gpio5", -+}; -+ -+static const char * const ephy0_led_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const ephy1_led_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const ephy2_led_groups[] = { -+ "gpio8", -+}; -+ -+static const char * const ephy3_led_groups[] = { -+ "gpio9", -+}; -+ -+static const char * const robosw_led_data_groups[] = { -+ "gpio10", -+}; -+ -+static const char * const robosw_led_clk_groups[] = { -+ "gpio11", -+}; -+ -+static const char * const robosw_led0_groups[] = { -+ "gpio12", -+}; -+ -+static const char * const robosw_led1_groups[] = { -+ "gpio13", -+}; -+ -+static const char * const usb_device_led_groups[] = { -+ "gpio14", -+}; -+ -+static const char * const pci_req1_groups[] = { -+ "gpio16", -+}; -+ -+static const char * const pci_gnt1_groups[] = { -+ "gpio17", -+}; -+ -+static const char * const pci_intb_groups[] = { -+ "gpio18", -+}; -+ -+static const char * const pci_req0_groups[] = { -+ "gpio19", -+}; -+ -+static const char * const pci_gnt0_groups[] = { -+ "gpio20", -+}; -+ -+static const char * const pcmcia_cd1_groups[] = { -+ "gpio22", -+}; -+ -+static const char * const pcmcia_cd2_groups[] = { -+ "gpio23", -+}; -+ -+static const char * const pcmcia_vs1_groups[] = { -+ "gpio24", -+}; -+ -+static const char * const pcmcia_vs2_groups[] = { -+ "gpio25", -+}; -+ -+static const char * const ebi_cs2_groups[] = { -+ "gpio26", -+}; -+ -+static const char * const ebi_cs3_groups[] = { -+ "gpio27", -+}; -+ -+static const char * const spi_cs2_groups[] = { -+ "gpio28", -+}; -+ -+static const char * const spi_cs3_groups[] = { -+ "gpio29", -+}; -+ -+static const char * const spi_cs4_groups[] = { -+ "gpio30", -+}; -+ -+static const char * const spi_cs5_groups[] = { -+ "gpio31", -+}; -+ -+static const char * const uart1_groups[] = { -+ "uart1_grp", -+}; -+ -+#define BCM6368_FUN(n, out) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .dir_out = out, \ -+ } -+ -+#define BCM6368_BASEMODE_FUN(n, val, out) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .basemode = BCM6368_BASEMODE_##val, \ -+ .dir_out = out, \ -+ } -+ -+static const struct bcm6368_function bcm6368_funcs[] = { -+ BCM6368_FUN(analog_afe_0, 1), -+ BCM6368_FUN(analog_afe_1, 1), -+ BCM6368_FUN(sys_irq, 1), -+ BCM6368_FUN(serial_led_data, 1), -+ BCM6368_FUN(serial_led_clk, 1), -+ BCM6368_FUN(inet_led, 1), -+ BCM6368_FUN(ephy0_led, 1), -+ BCM6368_FUN(ephy1_led, 1), -+ BCM6368_FUN(ephy2_led, 1), -+ BCM6368_FUN(ephy3_led, 1), -+ BCM6368_FUN(robosw_led_data, 1), -+ BCM6368_FUN(robosw_led_clk, 1), -+ BCM6368_FUN(robosw_led0, 1), -+ BCM6368_FUN(robosw_led1, 1), -+ BCM6368_FUN(usb_device_led, 1), -+ BCM6368_FUN(pci_req1, 0), -+ BCM6368_FUN(pci_gnt1, 0), -+ BCM6368_FUN(pci_intb, 0), -+ BCM6368_FUN(pci_req0, 0), -+ BCM6368_FUN(pci_gnt0, 0), -+ BCM6368_FUN(pcmcia_cd1, 0), -+ BCM6368_FUN(pcmcia_cd2, 0), -+ BCM6368_FUN(pcmcia_vs1, 0), -+ BCM6368_FUN(pcmcia_vs2, 0), -+ BCM6368_FUN(ebi_cs2, 1), -+ BCM6368_FUN(ebi_cs3, 1), -+ BCM6368_FUN(spi_cs2, 1), -+ BCM6368_FUN(spi_cs3, 1), -+ BCM6368_FUN(spi_cs4, 1), -+ BCM6368_FUN(spi_cs5, 1), -+ BCM6368_BASEMODE_FUN(uart1, UART1, 0x6), -+}; -+ -+static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6368_groups); -+} -+ -+static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6368_groups[group].name; -+} -+ -+static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6368_groups[group].pins; -+ *num_pins = bcm6368_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6368_funcs); -+} -+ -+static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6368_funcs[selector].name; -+} -+ -+static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6368_funcs[selector].groups; -+ *num_groups = bcm6368_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm6368_rmw_mux(struct bcm6368_pinctrl *pctl, void __iomem *reg, -+ u32 mask, u32 val) -+{ -+ u32 tmp; -+ -+ tmp = __raw_readl(reg); -+ tmp &= ~mask; -+ tmp |= (val & mask); -+ __raw_writel(tmp, reg); -+} -+ -+static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6368_pingroup *grp = &bcm6368_groups[group]; -+ const struct bcm6368_function *fun = &bcm6368_funcs[selector]; -+ unsigned long flags; -+ int i, pin; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ if (fun->basemode) { -+ u32 mask = 0; -+ -+ for (i = 0; i < grp->num_pins; i++) { -+ pin = grp->pins[i]; -+ if (pin < 32) -+ mask |= BIT(pin); -+ } -+ -+ bcm6368_rmw_mux(pctl, pctl->mode, mask, 0); -+ regmap_field_write(pctl->overlay, fun->basemode); -+ } else { -+ pin = grp->pins[0]; -+ -+ if (bcm6368_pins[pin].drv_data) -+ regmap_field_write(pctl->overlay, -+ BCM6368_BASEMODE_GPIO); -+ -+ bcm6368_rmw_mux(pctl, pctl->mode, BIT(pin), BIT(pin)); -+ } -+ spin_unlock_irqrestore(&pctl->lock, flags); -+ -+ for (pin = 0; pin < grp->num_pins; pin++) { -+ int hw_gpio = bcm6368_pins[pin].number; -+ struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32]; -+ -+ if (fun->dir_out & BIT(pin)) -+ gc->direction_output(gc, hw_gpio % 32, 0); -+ else -+ gc->direction_input(gc, hw_gpio % 32); -+ } -+ -+ return 0; -+} -+ -+static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6368_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ unsigned long flags; -+ -+ if (offset >= 32 && !bcm6368_pins[offset].drv_data) -+ return 0; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ /* disable all functions using this pin */ -+ if (offset < 32) -+ bcm6368_rmw_mux(pctl, pctl->mode, BIT(offset), 0); -+ -+ if (bcm6368_pins[offset].drv_data) -+ regmap_field_write(pctl->overlay, BCM6368_BASEMODE_GPIO); -+ -+ spin_unlock_irqrestore(&pctl->lock, flags); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6368_pctl_ops = { -+ .get_groups_count = bcm6368_pinctrl_get_group_count, -+ .get_group_name = bcm6368_pinctrl_get_group_name, -+ .get_group_pins = bcm6368_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif -+}; -+ -+static struct pinmux_ops bcm6368_pmx_ops = { -+ .get_functions_count = bcm6368_pinctrl_get_func_count, -+ .get_function_name = bcm6368_pinctrl_get_func_name, -+ .get_function_groups = bcm6368_pinctrl_get_groups, -+ .set_mux = bcm6368_pinctrl_set_mux, -+ .gpio_request_enable = bcm6368_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6368_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct bcm6368_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *mode; -+ struct regmap *basemode; -+ struct reg_field overlay = REG_FIELD(0, 0, 3); -+ -+ if (pdev->dev.of_node) -+ basemode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, -+ "brcm,gpiobasemode"); -+ else -+ basemode = syscon_regmap_lookup_by_pdevname("syscon.b00000b8"); -+ -+ if (IS_ERR(basemode)) -+ return PTR_ERR(basemode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ pctl->overlay = devm_regmap_field_alloc(&pdev->dev, basemode, overlay); -+ if (IS_ERR(pctl->overlay)) -+ return PTR_ERR(pctl->overlay); -+ -+ spin_lock_init(&pctl->lock); -+ -+ pctl->mode = mode; -+ -+ /* disable all muxes by default */ -+ __raw_writel(0, pctl->mode); -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6368_pctl_ops; -+ pctl->desc.pmxops = &bcm6368_pmx_ops; -+ -+ pctl->desc.npins = ARRAY_SIZE(bcm6368_pins); -+ pctl->desc.pins = bcm6368_pins; -+ -+ platform_set_drvdata(pdev, pctl); -+ -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6368_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6368_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6368-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6368_pinctrl_driver = { -+ .probe = bcm6368_pinctrl_probe, -+ .driver = { -+ .name = "bcm6368-pinctrl", -+ .of_match_table = bcm6368_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6368_pinctrl_driver); diff --git a/target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch b/target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch deleted file mode 100644 index ffe842fd73..0000000000 --- a/target/linux/bcm63xx/patches-4.14/141-Documentation-add-BCM63268-pincontroller-binding-doc.patch +++ /dev/null @@ -1,106 +0,0 @@ -From 28cc80e4ada5d73d5305fd268297825cd8d01936 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 27 Jul 2016 11:37:08 +0200 -Subject: [PATCH 12/16] Documentation: add BCM63268 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in the BCM63268 -family SoCs. - -Signed-off-by: Jonas Gorski ---- - .../bindings/pinctrl/brcm,bcm63268-pinctrl.txt | 88 ++++++++++++++++++++++ - 1 file changed, 88 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.txt -@@ -0,0 +1,88 @@ -+* Broadcom BCM63268 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6362-pinctrl". -+- reg: Register specifiers of dirout, dat, led, mode, ctrl, basemode registers. -+- reg-names: Must be "dirout", "dat", "led", "mode", "ctrl", "basemode". -+- gpio-controller: Identifies this node as a GPIO controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@100000c0 { -+ compatible = "brcm,bcm63268-pinctrl"; -+ reg = <0x100000c0 0x8>, -+ <0x100000c8 0x8>, -+ <0x100000d0 0x4>, -+ <0x100000d8 0x4>, -+ <0x100000dc 0x4>, -+ <0x100000f8 0x4>; -+ reg-names = "dirout", "dat", "led", "mode", -+ "ctrl", "basemode"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 led, serial_led_clk -+gpio1 1 led, serial_led_data -+gpio2 2 led, -+gpio3 3 led, -+gpio4 4 led, -+gpio5 5 led, -+gpio6 6 led, -+gpio7 7 led, -+gpio8 8 led, hsspi_cs6 -+gpio9 9 led, hsspi_cs7 -+gpio10 10 led, uart1_scts -+gpio11 11 led, uart1_srts -+gpio12 12 led, uart1_sdin -+gpio13 13 led, uart1_sdout -+gpio14 14 led, ntr_pulse_in -+gpio15 15 led, dsl_ntr_pulse_out -+gpio16 16 led, hsspi_cs4 -+gpio17 17 led, hsspi_cs5 -+gpio18 18 led, adsl_spi_miso -+gpio19 19 led, adsl_spi_mosi -+gpio20 20 led, -+gpio21 21 led, -+gpio22 22 led, vreg_clk -+gpio23 23 led, pcie_clkreq_b -+gpio24 24 uart1_scts -+gpio25 25 uart1_srts -+gpio26 26 uart1_sdin -+gpio27 27 uart1_sdout -+gpio28 28 ntr_pulse_in -+gpio29 29 dsl_ntr_pulse_out -+gpio30 30 switch_led_clk -+gpio31 31 switch_led_data -+gpio32 32 wifi -+gpio33 33 wifi -+gpio34 34 wifi -+gpio35 35 wifi -+gpio36 36 wifi -+gpio37 37 wifi -+gpio38 38 wifi -+gpio39 39 wifi -+gpio40 40 wifi -+gpio41 41 wifi -+gpio42 42 wifi -+gpio43 43 wifi -+gpio44 44 wifi -+gpio45 45 wifi -+gpio46 46 wifi -+gpio47 47 wifi -+gpio48 48 wifi -+gpio49 49 wifi -+gpio50 50 wifi -+gpio51 51 wifi -+nand_grp 2-7,24-31 nand -+dect_pd_grp 8-9 dect_pd -+vdsl_phy0_grp 10-11 vdsl_phy0 -+vdsl_phy1_grp 12-13 vdsl_phy1 -+vdsl_phy2_grp 24-25 vdsl_phy2 -+vdsl_phy3_grp 26-27 vdsl_phy3 diff --git a/target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch deleted file mode 100644 index 089d14e3e4..0000000000 --- a/target/linux/bcm63xx/patches-4.14/142-pinctrl-add-a-pincontrol-driver-for-BCM63268.patch +++ /dev/null @@ -1,736 +0,0 @@ -From 8665d3ea63649cc155286c75f83f694a930580e5 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 24 Jun 2016 22:19:12 +0200 -Subject: [PATCH 13/16] pinctrl: add a pincontrol driver for BCM63268 - -Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOs -to different functions. Depending on the mux, these are either single -pin configurations or whole pin groups. - -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c | 710 +++++++++++++++++++++++++++++ - 2 files changed, 711 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c - ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -4,3 +4,4 @@ obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o - obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o - obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o -+obj-$(CONFIG_PINCTRL_BCM63268) += pinctrl-bcm63268.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm63268.c -@@ -0,0 +1,710 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#include "pinctrl-bcm63xx.h" -+ -+#define BCM63268_NGPIO 52 -+ -+/* GPIO_BASEMODE register */ -+#define BASEMODE_NAND BIT(2) /* GPIOs 2-7, 24-31 */ -+#define BASEMODE_GPIO35 BIT(4) /* GPIO 35 */ -+#define BASEMODE_DECTPD BIT(5) /* GPIOs 8/9 */ -+#define BASEMODE_VDSL_PHY_0 BIT(6) /* GPIOs 10/11 */ -+#define BASEMODE_VDSL_PHY_1 BIT(7) /* GPIOs 12/13 */ -+#define BASEMODE_VDSL_PHY_2 BIT(8) /* GPIOs 24/25 */ -+#define BASEMODE_VDSL_PHY_3 BIT(9) /* GPIOs 26/27 */ -+ -+enum bcm63268_pinctrl_reg { -+ BCM63268_LEDCTRL, -+ BCM63268_MODE, -+ BCM63268_CTRL, -+ BCM63268_BASEMODE, -+}; -+ -+struct bcm63268_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm63268_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ enum bcm63268_pinctrl_reg reg; -+ u32 mask; -+}; -+ -+struct bcm63268_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *led; -+ void __iomem *mode; -+ void __iomem *ctrl; -+ void __iomem *basemode; -+ -+ /* register access lock */ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio[2]; -+}; -+ -+#define BCM63268_PIN(a, b, basemode) \ -+ { \ -+ .number = a, \ -+ .name = b, \ -+ .drv_data = (void *)(basemode) \ -+ } -+ -+static const struct pinctrl_pin_desc bcm63268_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ BCM63268_PIN(2, "gpio2", BASEMODE_NAND), -+ BCM63268_PIN(3, "gpio3", BASEMODE_NAND), -+ BCM63268_PIN(4, "gpio4", BASEMODE_NAND), -+ BCM63268_PIN(5, "gpio5", BASEMODE_NAND), -+ BCM63268_PIN(6, "gpio6", BASEMODE_NAND), -+ BCM63268_PIN(7, "gpio7", BASEMODE_NAND), -+ BCM63268_PIN(8, "gpio8", BASEMODE_DECTPD), -+ BCM63268_PIN(9, "gpio9", BASEMODE_DECTPD), -+ BCM63268_PIN(10, "gpio10", BASEMODE_VDSL_PHY_0), -+ BCM63268_PIN(11, "gpio11", BASEMODE_VDSL_PHY_0), -+ BCM63268_PIN(12, "gpio12", BASEMODE_VDSL_PHY_1), -+ BCM63268_PIN(13, "gpio13", BASEMODE_VDSL_PHY_1), -+ PINCTRL_PIN(14, "gpio14"), -+ PINCTRL_PIN(15, "gpio15"), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ PINCTRL_PIN(22, "gpio22"), -+ PINCTRL_PIN(23, "gpio23"), -+ BCM63268_PIN(24, "gpio24", BASEMODE_NAND | BASEMODE_VDSL_PHY_2), -+ BCM63268_PIN(25, "gpio25", BASEMODE_NAND | BASEMODE_VDSL_PHY_2), -+ BCM63268_PIN(26, "gpio26", BASEMODE_NAND | BASEMODE_VDSL_PHY_3), -+ BCM63268_PIN(27, "gpio27", BASEMODE_NAND | BASEMODE_VDSL_PHY_3), -+ BCM63268_PIN(28, "gpio28", BASEMODE_NAND), -+ BCM63268_PIN(29, "gpio29", BASEMODE_NAND), -+ BCM63268_PIN(30, "gpio30", BASEMODE_NAND), -+ BCM63268_PIN(31, "gpio31", BASEMODE_NAND), -+ PINCTRL_PIN(32, "gpio32"), -+ PINCTRL_PIN(33, "gpio33"), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+ PINCTRL_PIN(38, "gpio38"), -+ PINCTRL_PIN(39, "gpio39"), -+ PINCTRL_PIN(40, "gpio40"), -+ PINCTRL_PIN(41, "gpio41"), -+ PINCTRL_PIN(42, "gpio42"), -+ PINCTRL_PIN(43, "gpio43"), -+ PINCTRL_PIN(44, "gpio44"), -+ PINCTRL_PIN(45, "gpio45"), -+ PINCTRL_PIN(46, "gpio46"), -+ PINCTRL_PIN(47, "gpio47"), -+ PINCTRL_PIN(48, "gpio48"), -+ PINCTRL_PIN(49, "gpio49"), -+ PINCTRL_PIN(50, "gpio50"), -+ PINCTRL_PIN(51, "gpio51"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+static unsigned gpio32_pins[] = { 32 }; -+static unsigned gpio33_pins[] = { 33 }; -+static unsigned gpio34_pins[] = { 34 }; -+static unsigned gpio35_pins[] = { 35 }; -+static unsigned gpio36_pins[] = { 36 }; -+static unsigned gpio37_pins[] = { 37 }; -+static unsigned gpio38_pins[] = { 38 }; -+static unsigned gpio39_pins[] = { 39 }; -+static unsigned gpio40_pins[] = { 40 }; -+static unsigned gpio41_pins[] = { 41 }; -+static unsigned gpio42_pins[] = { 42 }; -+static unsigned gpio43_pins[] = { 43 }; -+static unsigned gpio44_pins[] = { 44 }; -+static unsigned gpio45_pins[] = { 45 }; -+static unsigned gpio46_pins[] = { 46 }; -+static unsigned gpio47_pins[] = { 47 }; -+static unsigned gpio48_pins[] = { 48 }; -+static unsigned gpio49_pins[] = { 49 }; -+static unsigned gpio50_pins[] = { 50 }; -+static unsigned gpio51_pins[] = { 51 }; -+ -+static unsigned nand_grp_pins[] = { -+ 2, 3, 4, 5, 6, 7, 24, -+ 25, 26, 27, 28, 29, 30, 31, -+}; -+ -+static unsigned dectpd_grp_pins[] = { 8, 9 }; -+static unsigned vdsl_phy0_grp_pins[] = { 10, 11 }; -+static unsigned vdsl_phy1_grp_pins[] = { 12, 13 }; -+static unsigned vdsl_phy2_grp_pins[] = { 24, 25 }; -+static unsigned vdsl_phy3_grp_pins[] = { 26, 27 }; -+ -+#define BCM63268_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm63268_pingroup bcm63268_groups[] = { -+ BCM63268_GROUP(gpio0), -+ BCM63268_GROUP(gpio1), -+ BCM63268_GROUP(gpio2), -+ BCM63268_GROUP(gpio3), -+ BCM63268_GROUP(gpio4), -+ BCM63268_GROUP(gpio5), -+ BCM63268_GROUP(gpio6), -+ BCM63268_GROUP(gpio7), -+ BCM63268_GROUP(gpio8), -+ BCM63268_GROUP(gpio9), -+ BCM63268_GROUP(gpio10), -+ BCM63268_GROUP(gpio11), -+ BCM63268_GROUP(gpio12), -+ BCM63268_GROUP(gpio13), -+ BCM63268_GROUP(gpio14), -+ BCM63268_GROUP(gpio15), -+ BCM63268_GROUP(gpio16), -+ BCM63268_GROUP(gpio17), -+ BCM63268_GROUP(gpio18), -+ BCM63268_GROUP(gpio19), -+ BCM63268_GROUP(gpio20), -+ BCM63268_GROUP(gpio21), -+ BCM63268_GROUP(gpio22), -+ BCM63268_GROUP(gpio23), -+ BCM63268_GROUP(gpio24), -+ BCM63268_GROUP(gpio25), -+ BCM63268_GROUP(gpio26), -+ BCM63268_GROUP(gpio27), -+ BCM63268_GROUP(gpio28), -+ BCM63268_GROUP(gpio29), -+ BCM63268_GROUP(gpio30), -+ BCM63268_GROUP(gpio31), -+ BCM63268_GROUP(gpio32), -+ BCM63268_GROUP(gpio33), -+ BCM63268_GROUP(gpio34), -+ BCM63268_GROUP(gpio35), -+ BCM63268_GROUP(gpio36), -+ BCM63268_GROUP(gpio37), -+ BCM63268_GROUP(gpio38), -+ BCM63268_GROUP(gpio39), -+ BCM63268_GROUP(gpio40), -+ BCM63268_GROUP(gpio41), -+ BCM63268_GROUP(gpio42), -+ BCM63268_GROUP(gpio43), -+ BCM63268_GROUP(gpio44), -+ BCM63268_GROUP(gpio45), -+ BCM63268_GROUP(gpio46), -+ BCM63268_GROUP(gpio47), -+ BCM63268_GROUP(gpio48), -+ BCM63268_GROUP(gpio49), -+ BCM63268_GROUP(gpio50), -+ BCM63268_GROUP(gpio51), -+ -+ /* multi pin groups */ -+ BCM63268_GROUP(nand_grp), -+ BCM63268_GROUP(dectpd_grp), -+ BCM63268_GROUP(vdsl_phy0_grp), -+ BCM63268_GROUP(vdsl_phy1_grp), -+ BCM63268_GROUP(vdsl_phy2_grp), -+ BCM63268_GROUP(vdsl_phy3_grp), -+}; -+ -+static const char * const led_groups[] = { -+ "gpio0", -+ "gpio1", -+ "gpio2", -+ "gpio3", -+ "gpio4", -+ "gpio5", -+ "gpio6", -+ "gpio7", -+ "gpio8", -+ "gpio9", -+ "gpio10", -+ "gpio11", -+ "gpio12", -+ "gpio13", -+ "gpio14", -+ "gpio15", -+ "gpio16", -+ "gpio17", -+ "gpio18", -+ "gpio19", -+ "gpio20", -+ "gpio21", -+ "gpio22", -+ "gpio23", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio0", -+}; -+ -+static const char * const serial_led_data_groups[] = { -+ "gpio1", -+}; -+ -+static const char * const hsspi_cs4_groups[] = { -+ "gpio16", -+}; -+ -+static const char * const hsspi_cs5_groups[] = { -+ "gpio17", -+}; -+ -+static const char * const hsspi_cs6_groups[] = { -+ "gpio8", -+}; -+ -+static const char * const hsspi_cs7_groups[] = { -+ "gpio9", -+}; -+ -+static const char * const uart1_scts_groups[] = { -+ "gpio10", -+ "gpio24", -+}; -+ -+static const char * const uart1_srts_groups[] = { -+ "gpio11", -+ "gpio25", -+}; -+ -+static const char * const uart1_sdin_groups[] = { -+ "gpio12", -+ "gpio26", -+}; -+ -+static const char * const uart1_sdout_groups[] = { -+ "gpio13", -+ "gpio27", -+}; -+ -+static const char * const ntr_pulse_in_groups[] = { -+ "gpio14", -+ "gpio28", -+}; -+ -+static const char * const dsl_ntr_pulse_out_groups[] = { -+ "gpio15", -+ "gpio29", -+}; -+ -+static const char * const adsl_spi_miso_groups[] = { -+ "gpio18", -+}; -+ -+static const char * const adsl_spi_mosi_groups[] = { -+ "gpio19", -+}; -+ -+static const char * const vreg_clk_groups[] = { -+ "gpio22", -+}; -+ -+static const char * const pcie_clkreq_b_groups[] = { -+ "gpio23", -+}; -+ -+static const char * const switch_led_clk_groups[] = { -+ "gpio30", -+}; -+ -+static const char * const switch_led_data_groups[] = { -+ "gpio31", -+}; -+ -+static const char * const wifi_groups[] = { -+ "gpio32", -+ "gpio33", -+ "gpio34", -+ "gpio35", -+ "gpio36", -+ "gpio37", -+ "gpio38", -+ "gpio39", -+ "gpio40", -+ "gpio41", -+ "gpio42", -+ "gpio43", -+ "gpio44", -+ "gpio45", -+ "gpio46", -+ "gpio47", -+ "gpio48", -+ "gpio49", -+ "gpio50", -+ "gpio51", -+}; -+ -+static const char * const nand_groups[] = { -+ "nand_grp", -+}; -+ -+static const char * const dectpd_groups[] = { -+ "dectpd_grp", -+}; -+ -+static const char * const vdsl_phy_override_0_groups[] = { -+ "vdsl_phy_override_0_grp", -+}; -+ -+static const char * const vdsl_phy_override_1_groups[] = { -+ "vdsl_phy_override_1_grp", -+}; -+ -+static const char * const vdsl_phy_override_2_groups[] = { -+ "vdsl_phy_override_2_grp", -+}; -+ -+static const char * const vdsl_phy_override_3_groups[] = { -+ "vdsl_phy_override_3_grp", -+}; -+ -+#define BCM63268_LED_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM63268_LEDCTRL, \ -+ } -+ -+#define BCM63268_MODE_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM63268_MODE, \ -+ } -+ -+#define BCM63268_CTRL_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM63268_CTRL, \ -+ } -+ -+#define BCM63268_BASEMODE_FUN(n, val) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .reg = BCM63268_BASEMODE, \ -+ .mask = val, \ -+ } -+ -+static const struct bcm63268_function bcm63268_funcs[] = { -+ BCM63268_LED_FUN(led), -+ BCM63268_MODE_FUN(serial_led_clk), -+ BCM63268_MODE_FUN(serial_led_data), -+ BCM63268_MODE_FUN(hsspi_cs6), -+ BCM63268_MODE_FUN(hsspi_cs7), -+ BCM63268_MODE_FUN(uart1_scts), -+ BCM63268_MODE_FUN(uart1_srts), -+ BCM63268_MODE_FUN(uart1_sdin), -+ BCM63268_MODE_FUN(uart1_sdout), -+ BCM63268_MODE_FUN(ntr_pulse_in), -+ BCM63268_MODE_FUN(dsl_ntr_pulse_out), -+ BCM63268_MODE_FUN(hsspi_cs4), -+ BCM63268_MODE_FUN(hsspi_cs5), -+ BCM63268_MODE_FUN(adsl_spi_miso), -+ BCM63268_MODE_FUN(adsl_spi_mosi), -+ BCM63268_MODE_FUN(vreg_clk), -+ BCM63268_MODE_FUN(pcie_clkreq_b), -+ BCM63268_MODE_FUN(switch_led_clk), -+ BCM63268_MODE_FUN(switch_led_data), -+ BCM63268_CTRL_FUN(wifi), -+ BCM63268_BASEMODE_FUN(nand, BASEMODE_NAND), -+ BCM63268_BASEMODE_FUN(dectpd, BASEMODE_DECTPD), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_0, BASEMODE_VDSL_PHY_0), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_1, BASEMODE_VDSL_PHY_1), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_2, BASEMODE_VDSL_PHY_2), -+ BCM63268_BASEMODE_FUN(vdsl_phy_override_3, BASEMODE_VDSL_PHY_3), -+}; -+ -+static int bcm63268_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm63268_groups); -+} -+ -+static const char *bcm63268_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm63268_groups[group].name; -+} -+ -+static int bcm63268_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, -+ const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm63268_groups[group].pins; -+ *num_pins = bcm63268_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm63268_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm63268_funcs); -+} -+ -+static const char *bcm63268_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm63268_funcs[selector].name; -+} -+ -+static int bcm63268_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm63268_funcs[selector].groups; -+ *num_groups = bcm63268_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm63268_rmw_mux(struct bcm63268_pinctrl *pctl, void __iomem *reg, -+ u32 mask, u32 val) -+{ -+ unsigned long flags; -+ u32 tmp; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ tmp = __raw_readl(reg); -+ tmp &= ~mask; -+ tmp |= val; -+ __raw_writel(tmp, reg); -+ -+ spin_unlock_irqrestore(&pctl->lock, flags); -+} -+ -+static void bcm63268_set_gpio(struct bcm63268_pinctrl *pctl, unsigned pin) -+{ -+ const struct pinctrl_pin_desc *desc = &bcm63268_pins[pin]; -+ u32 basemode = (unsigned long)desc->drv_data; -+ u32 mask = BIT(pin % 32); -+ -+ if (basemode) -+ bcm63268_rmw_mux(pctl, pctl->basemode, basemode, 0); -+ -+ if (pin < 32) { -+ /* base mode: 0 => gpio, 1 => mux function */ -+ bcm63268_rmw_mux(pctl, pctl->mode, mask, 0); -+ -+ /* pins 0-23 might be muxed to led */ -+ if (pin < 24) -+ bcm63268_rmw_mux(pctl, pctl->led, mask, 0); -+ } else if (pin < 52) { -+ /* ctrl reg: 0 => wifi function, 1 => gpio */ -+ bcm63268_rmw_mux(pctl, pctl->ctrl, mask, mask); -+ } -+} -+ -+static int bcm63268_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm63268_pingroup *grp = &bcm63268_groups[group]; -+ const struct bcm63268_function *f = &bcm63268_funcs[selector]; -+ unsigned i; -+ void __iomem *reg; -+ u32 val, mask; -+ -+ for (i = 0; i < grp->num_pins; i++) -+ bcm63268_set_gpio(pctl, grp->pins[i]); -+ -+ switch (f->reg) { -+ case BCM63268_LEDCTRL: -+ reg = pctl->led; -+ mask = BIT(grp->pins[0]); -+ val = BIT(grp->pins[0]); -+ break; -+ case BCM63268_MODE: -+ reg = pctl->mode; -+ mask = BIT(grp->pins[0]); -+ val = BIT(grp->pins[0]); -+ break; -+ case BCM63268_CTRL: -+ reg = pctl->ctrl; -+ mask = BIT(grp->pins[0]); -+ val = 0; -+ break; -+ case BCM63268_BASEMODE: -+ reg = pctl->basemode; -+ mask = f->mask; -+ val = f->mask; -+ break; -+ default: -+ WARN_ON(1); -+ return -EINVAL; -+ } -+ -+ bcm63268_rmw_mux(pctl, reg, mask, val); -+ -+ return 0; -+} -+ -+static int bcm63268_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm63268_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable all functions using this pin */ -+ bcm63268_set_gpio(pctl, offset); -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm63268_pctl_ops = { -+ .get_groups_count = bcm63268_pinctrl_get_group_count, -+ .get_group_name = bcm63268_pinctrl_get_group_name, -+ .get_group_pins = bcm63268_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif -+}; -+ -+static struct pinmux_ops bcm63268_pmx_ops = { -+ .get_functions_count = bcm63268_pinctrl_get_func_count, -+ .get_function_name = bcm63268_pinctrl_get_func_name, -+ .get_function_groups = bcm63268_pinctrl_get_groups, -+ .set_mux = bcm63268_pinctrl_set_mux, -+ .gpio_request_enable = bcm63268_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm63268_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct bcm63268_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *led, *mode, *ctrl, *basemode; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "led"); -+ led = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(led)) -+ return PTR_ERR(led); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); -+ ctrl = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(ctrl)) -+ return PTR_ERR(ctrl); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "basemode"); -+ basemode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(basemode)) -+ return PTR_ERR(basemode); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); -+ -+ pctl->led = led; -+ pctl->mode = mode; -+ pctl->ctrl = ctrl; -+ pctl->basemode = basemode; -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm63268_pctl_ops; -+ pctl->desc.pmxops = &bcm63268_pmx_ops; -+ -+ pctl->desc.npins = ARRAY_SIZE(bcm63268_pins); -+ pctl->desc.pins = bcm63268_pins; -+ -+ platform_set_drvdata(pdev, pctl); -+ -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM63268_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm63268_pinctrl_match[] = { -+ { .compatible = "brcm,bcm63268-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm63268_pinctrl_driver = { -+ .probe = bcm63268_pinctrl_probe, -+ .driver = { -+ .name = "bcm63268-pinctrl", -+ .of_match_table = bcm63268_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm63268_pinctrl_driver); diff --git a/target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch b/target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch deleted file mode 100644 index e1d43da87a..0000000000 --- a/target/linux/bcm63xx/patches-4.14/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch +++ /dev/null @@ -1,134 +0,0 @@ -From e058fa1969019c2f6705c53c4130e364a877d4e6 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 26 Nov 2017 12:07:31 +0100 -Subject: [PATCH] gpio: fix device tree gpio hogs on dual role gpio/pincontrol - controllers - -For dual role gpio and pincontrol controller, the device registration -path is often: - - pinctrl_register(...); - gpiochip_add_data(...); - gpiochip_add_pin_range(...); - -If the device tree node has any gpio-hogs, the code will try to apply them -in the gpiochip_add_data step, but fail as they cannot be requested, as the -ranges are missing. But we also cannot first add the pinranges, as the -appropriate data structures are only initialized in gpiochip_add_data. - -To fix this, defer gpio-hogs to the time pin ranges get added instead of -directly at chip request time, if the gpio-chip has a request method. - -Signed-off-by: Jonas Gorski ---- - - drivers/gpio/gpiolib-of.c | 20 +++++++++++++++----- - drivers/gpio/gpiolib.c | 5 +++-- - drivers/gpio/gpiolib.h | 8 ++++++++ - 3 files changed, 26 insertions(+), 7 deletions(-) - ---- a/drivers/gpio/gpiolib-of.c -+++ b/drivers/gpio/gpiolib-of.c -@@ -237,12 +237,15 @@ static struct gpio_desc *of_parse_own_gp - /** - * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions - * @chip: gpio chip to act on -+ * @start: first gpio to check -+ * @num: number of gpios to check - * -- * This is only used by of_gpiochip_add to request/set GPIO initial -- * configuration. -+ * This is used by of_gpiochip_add, gpiochip_add_pingroup_range and -+ * gpiochip_add_pin_range to request/set GPIO initial configuration. - * It returns error if it fails otherwise 0 on success. - */ --static int of_gpiochip_scan_gpios(struct gpio_chip *chip) -+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start, -+ unsigned int num) - { - struct gpio_desc *desc = NULL; - struct device_node *np; -@@ -250,7 +253,7 @@ static int of_gpiochip_scan_gpios(struct - enum gpio_lookup_flags lflags; - enum gpiod_flags dflags; - unsigned int i; -- int ret; -+ int ret, hwgpio; - - for_each_available_child_of_node(chip->of_node, np) { - if (!of_property_read_bool(np, "gpio-hog")) -@@ -262,6 +265,10 @@ static int of_gpiochip_scan_gpios(struct - if (IS_ERR(desc)) - break; - -+ hwgpio = gpio_chip_hwgpio(desc); -+ if (hwgpio < start || hwgpio >= (start + num)) -+ continue; -+ - ret = gpiod_hog(desc, name, lflags, dflags); - if (ret < 0) { - of_node_put(np); -@@ -499,12 +506,13 @@ int of_gpiochip_add(struct gpio_chip *ch - - of_node_get(chip->of_node); - -- status = of_gpiochip_scan_gpios(chip); -- if (status) { -- of_node_put(chip->of_node); -- gpiochip_remove_pin_ranges(chip); -+ if (!chip->request) { -+ status = of_gpiochip_scan_gpios(chip, 0, chip->ngpio); -+ if (status) { -+ of_node_put(chip->of_node); -+ gpiochip_remove_pin_ranges(chip); -+ } - } -- - return status; - } - ---- a/drivers/gpio/gpiolib.c -+++ b/drivers/gpio/gpiolib.c -@@ -1941,7 +1941,8 @@ int gpiochip_add_pingroup_range(struct g - - list_add_tail(&pin_range->node, &gdev->pin_ranges); - -- return 0; -+ return of_gpiochip_scan_gpios(chip, gpio_offset, -+ pin_range->range.npins); - } - EXPORT_SYMBOL_GPL(gpiochip_add_pingroup_range); - -@@ -1993,7 +1994,7 @@ int gpiochip_add_pin_range(struct gpio_c - - list_add_tail(&pin_range->node, &gdev->pin_ranges); - -- return 0; -+ return of_gpiochip_scan_gpios(chip, gpio_offset, npins); - } - EXPORT_SYMBOL_GPL(gpiochip_add_pin_range); - ---- a/drivers/gpio/gpiolib.h -+++ b/drivers/gpio/gpiolib.h -@@ -99,6 +99,8 @@ struct gpio_desc *of_get_named_gpiod_fla - const char *list_name, int index, enum of_gpio_flags *flags); - int of_gpiochip_add(struct gpio_chip *gc); - void of_gpiochip_remove(struct gpio_chip *gc); -+int of_gpiochip_scan_gpios(struct gpio_chip *chip, unsigned int start, -+ unsigned int num); - #else - static inline struct gpio_desc *of_find_gpio(struct device *dev, - const char *con_id, -@@ -114,6 +116,12 @@ static inline struct gpio_desc *of_get_n - } - static inline int of_gpiochip_add(struct gpio_chip *gc) { return 0; } - static inline void of_gpiochip_remove(struct gpio_chip *gc) { } -+static inline int of_gpiochip_scan_gpios(struct gpio_chip *chip, -+ unsigned int start, -+ unsigned int num) -+{ -+ return 0; -+} - #endif /* CONFIG_OF_GPIO */ - - #ifdef CONFIG_ACPI diff --git a/target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch deleted file mode 100644 index e7ebb0be15..0000000000 --- a/target/linux/bcm63xx/patches-4.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 19 Jan 2014 12:18:03 +0100 -Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform - -In the same way as the ohci platform driver allows limiting ports, -enable the same for ehci. This prevents a mismatch in the available -ports between ehci/ohci on USB 2.0 controllers. - -This is needed if the USB host controller always reports the maximum -number of ports regardless of the number of available ports (because -one might be set to be usb device). - -Signed-off-by: Jonas Gorski ---- - drivers/usb/host/ehci-hcd.c | 4 ++++ - drivers/usb/host/ehci-platform.c | 2 ++ - drivers/usb/host/ehci.h | 1 + - include/linux/usb/ehci_pdriver.h | 1 + - 4 files changed, 8 insertions(+) - ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -678,6 +678,10 @@ int ehci_setup(struct usb_hcd *hcd) - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); -+ if (ehci->num_ports) { -+ ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */ -+ ehci->hcs_params |= ehci->num_ports; -+ } - - ehci->sbrn = HCD_USB2; - ---- a/drivers/usb/host/ehci-platform.c -+++ b/drivers/usb/host/ehci-platform.c -@@ -62,6 +62,9 @@ static int ehci_platform_reset(struct us - - ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; - -+ if (pdata->num_ports && pdata->num_ports <= 15) -+ ehci->num_ports = pdata->num_ports; -+ - if (pdata->pre_setup) { - retval = pdata->pre_setup(hcd); - if (retval < 0) ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -216,6 +216,7 @@ struct ehci_hcd { /* one per controlle - u32 command; - - /* SILICON QUIRKS */ -+ unsigned int num_ports; - unsigned no_selective_suspend:1; - unsigned has_fsl_port_bug:1; /* FreeScale */ - unsigned has_fsl_hs_errata:1; /* Freescale HS quirk */ ---- a/include/linux/usb/ehci_pdriver.h -+++ b/include/linux/usb/ehci_pdriver.h -@@ -42,6 +42,7 @@ struct usb_hcd; - */ - struct usb_ehci_pdata { - int caps_offset; -+ unsigned int num_ports; - unsigned has_tt:1; - unsigned has_synopsys_hc_bug:1; - unsigned big_endian_desc:1; diff --git a/target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch deleted file mode 100644 index 90b1640d16..0000000000 --- a/target/linux/bcm63xx/patches-4.14/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch +++ /dev/null @@ -1,484 +0,0 @@ -From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 9 Mar 2014 03:54:05 +0100 -Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its - own file - -Move device registration code into its own file to allow sharing it -between board implementations. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/Makefile | 1 + - arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +------------------------- - arch/mips/bcm63xx/boards/board_common.c | 215 ++++++++++++++++++++++++++++++ - arch/mips/bcm63xx/boards/board_common.h | 8 ++ - 4 files changed, 223 insertions(+), 183 deletions(-) - create mode 100644 arch/mips/bcm63xx/boards/board_common.c - create mode 100644 arch/mips/bcm63xx/boards/board_common.h - ---- a/arch/mips/bcm63xx/boards/Makefile -+++ b/arch/mips/bcm63xx/boards/Makefile -@@ -1 +1,2 @@ -+obj-y += board_common.o - obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -12,33 +12,21 @@ - #include - #include - #include --#include --#include - #include - #include - #include --#include - #include - #include - #include --#include --#include --#include --#include --#include --#include --#include --#include --#include - #include - -+#include "board_common.h" -+ - #include - - - #define HCS_OFFSET_128K 0x20000 - --static struct board_info board; -- - /* - * known 3368 boards - */ -@@ -695,52 +683,6 @@ static const struct board_info __initcon - }; - - /* -- * Register a sane SPROMv2 to make the on-board -- * bcm4318 WLAN work -- */ --#ifdef CONFIG_SSB_PCIHOST --static struct ssb_sprom bcm63xx_sprom = { -- .revision = 0x02, -- .board_rev = 0x17, -- .country_code = 0x0, -- .ant_available_bg = 0x3, -- .pa0b0 = 0x15ae, -- .pa0b1 = 0xfa85, -- .pa0b2 = 0xfe8d, -- .pa1b0 = 0xffff, -- .pa1b1 = 0xffff, -- .pa1b2 = 0xffff, -- .gpio0 = 0xff, -- .gpio1 = 0xff, -- .gpio2 = 0xff, -- .gpio3 = 0xff, -- .maxpwr_bg = 0x004c, -- .itssi_bg = 0x00, -- .boardflags_lo = 0x2848, -- .boardflags_hi = 0x0000, --}; -- --int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) --{ -- if (bus->bustype == SSB_BUSTYPE_PCI) { -- memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -- return 0; -- } else { -- pr_err("unable to fill SPROM for given bustype\n"); -- return -EINVAL; -- } --} --#endif -- --/* -- * return board name for /proc/cpuinfo -- */ --const char *board_get_name(void) --{ -- return board.name; --} -- --/* - * early init callback, read nvram data from flash and checksum it - */ - void __init board_prom_init(void) -@@ -785,137 +727,15 @@ void __init board_prom_init(void) - if (strncmp(board_name, bcm963xx_boards[i]->name, 16)) - continue; - /* copy, board desc array is marked initdata */ -- memcpy(&board, bcm963xx_boards[i], sizeof(board)); -+ board_early_setup(bcm963xx_boards[i]); - break; - } - -- /* bail out if board is not found, will complain later */ -- if (!board.name[0]) { -+ /* warn if board is not found, will complain later */ -+ if (i == ARRAY_SIZE(bcm963xx_boards)) { - char name[17]; - memcpy(name, board_name, 16); - name[16] = 0; - pr_err("unknown bcm963xx board: %s\n", name); -- return; -- } -- -- /* setup pin multiplexing depending on board enabled device, -- * this has to be done this early since PCI init is done -- * inside arch_initcall */ -- val = 0; -- --#ifdef CONFIG_PCI -- if (board.has_pci) { -- bcm63xx_pci_enabled = 1; -- if (BCMCPU_IS_6348()) -- val |= GPIO_MODE_6348_G2_PCI; - } --#endif -- -- if (board.has_pccard) { -- if (BCMCPU_IS_6348()) -- val |= GPIO_MODE_6348_G1_MII_PCCARD; -- } -- -- if (board.has_enet0 && !board.enet0.use_internal_phy) { -- if (BCMCPU_IS_6348()) -- val |= GPIO_MODE_6348_G3_EXT_MII | -- GPIO_MODE_6348_G0_EXT_MII; -- } -- -- if (board.has_enet1 && !board.enet1.use_internal_phy) { -- if (BCMCPU_IS_6348()) -- val |= GPIO_MODE_6348_G3_EXT_MII | -- GPIO_MODE_6348_G0_EXT_MII; -- } -- -- bcm_gpio_writel(val, GPIO_MODE_REG); --} -- --/* -- * second stage init callback, good time to panic if we couldn't -- * identify on which board we're running since early printk is working -- */ --void __init board_setup(void) --{ -- if (!board.name[0]) -- panic("unable to detect bcm963xx board"); -- pr_info("board name: %s\n", board.name); -- -- /* make sure we're running on expected cpu */ -- if (bcm63xx_get_cpu_id() != board.expected_cpu_id) -- panic("unexpected CPU for bcm963xx board"); --} -- --static struct gpio_led_platform_data bcm63xx_led_data; -- --static struct platform_device bcm63xx_gpio_leds = { -- .name = "leds-gpio", -- .id = 0, -- .dev.platform_data = &bcm63xx_led_data, --}; -- --/* -- * third stage init callback, register all board devices. -- */ --int __init board_register_devices(void) --{ -- if (board.has_uart0) -- bcm63xx_uart_register(0); -- -- if (board.has_uart1) -- bcm63xx_uart_register(1); -- -- if (board.has_pccard) -- bcm63xx_pcmcia_register(); -- -- if (board.has_enet0 && -- !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr)) -- bcm63xx_enet_register(0, &board.enet0); -- -- if (board.has_enet1 && -- !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr)) -- bcm63xx_enet_register(1, &board.enet1); -- -- if (board.has_enetsw && -- !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr)) -- bcm63xx_enetsw_register(&board.enetsw); -- -- if (board.has_usbd) -- bcm63xx_usbd_register(&board.usbd); -- -- if (board.has_ehci0) -- bcm63xx_ehci_register(); -- -- if (board.has_ohci0) -- bcm63xx_ohci_register(); -- -- /* Generate MAC address for WLAN and register our SPROM, -- * do this after registering enet devices -- */ --#ifdef CONFIG_SSB_PCIHOST -- if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) { -- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); -- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); -- if (ssb_arch_register_fallback_sprom( -- &bcm63xx_get_fallback_sprom) < 0) -- pr_err("failed to register fallback SPROM\n"); -- } --#endif -- -- bcm63xx_spi_register(); -- -- bcm63xx_hsspi_register(); -- -- bcm63xx_flash_register(); -- -- bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); -- bcm63xx_led_data.leds = board.leds; -- -- platform_device_register(&bcm63xx_gpio_leds); -- -- if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) -- gpio_request_one(board.ephy_reset_gpio, -- board.ephy_reset_gpio_flags, "ephy-reset"); -- -- return 0; - } ---- /dev/null -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -0,0 +1,214 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Maxime Bizon -+ * Copyright (C) 2008 Florian Fainelli -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define PFX "board: " -+ -+static struct board_info board; -+ -+/* -+ * Register a sane SPROMv2 to make the on-board -+ * bcm4318 WLAN work -+ */ -+#ifdef CONFIG_SSB_PCIHOST -+static struct ssb_sprom bcm63xx_sprom = { -+ .revision = 0x02, -+ .board_rev = 0x17, -+ .country_code = 0x0, -+ .ant_available_bg = 0x3, -+ .pa0b0 = 0x15ae, -+ .pa0b1 = 0xfa85, -+ .pa0b2 = 0xfe8d, -+ .pa1b0 = 0xffff, -+ .pa1b1 = 0xffff, -+ .pa1b2 = 0xffff, -+ .gpio0 = 0xff, -+ .gpio1 = 0xff, -+ .gpio2 = 0xff, -+ .gpio3 = 0xff, -+ .maxpwr_bg = 0x004c, -+ .itssi_bg = 0x00, -+ .boardflags_lo = 0x2848, -+ .boardflags_hi = 0x0000, -+}; -+ -+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) -+{ -+ if (bus->bustype == SSB_BUSTYPE_PCI) { -+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -+ return 0; -+ } else { -+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); -+ return -EINVAL; -+ } -+} -+#endif -+ -+/* -+ * return board name for /proc/cpuinfo -+ */ -+const char *board_get_name(void) -+{ -+ return board.name; -+} -+ -+/* -+ * setup board for device registration -+ */ -+void __init board_early_setup(const struct board_info *target) -+{ -+ u32 val; -+ -+ memcpy(&board, target, sizeof(board)); -+ -+ /* setup pin multiplexing depending on board enabled device, -+ * this has to be done this early since PCI init is done -+ * inside arch_initcall */ -+ val = 0; -+ -+#ifdef CONFIG_PCI -+ if (board.has_pci) { -+ bcm63xx_pci_enabled = 1; -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G2_PCI; -+ } -+#endif -+ -+ if (board.has_pccard) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G1_MII_PCCARD; -+ } -+ -+ if (board.has_enet0 && !board.enet0.use_internal_phy) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G3_EXT_MII | -+ GPIO_MODE_6348_G0_EXT_MII; -+ } -+ -+ if (board.has_enet1 && !board.enet1.use_internal_phy) { -+ if (BCMCPU_IS_6348()) -+ val |= GPIO_MODE_6348_G3_EXT_MII | -+ GPIO_MODE_6348_G0_EXT_MII; -+ } -+ -+ bcm_gpio_writel(val, GPIO_MODE_REG); -+} -+ -+ -+/* -+ * second stage init callback, good time to panic if we couldn't -+ * identify on which board we're running since early printk is working -+ */ -+void __init board_setup(void) -+{ -+ if (!board.name[0]) -+ panic("unable to detect bcm963xx board"); -+ printk(KERN_INFO PFX "board name: %s\n", board.name); -+ -+ /* make sure we're running on expected cpu */ -+ if (bcm63xx_get_cpu_id() != board.expected_cpu_id) -+ panic("unexpected CPU for bcm963xx board"); -+} -+ -+static struct gpio_led_platform_data bcm63xx_led_data; -+ -+static struct platform_device bcm63xx_gpio_leds = { -+ .name = "leds-gpio", -+ .id = 0, -+ .dev.platform_data = &bcm63xx_led_data, -+}; -+ -+/* -+ * third stage init callback, register all board devices. -+ */ -+int __init board_register_devices(void) -+{ -+ if (board.has_uart0) -+ bcm63xx_uart_register(0); -+ -+ if (board.has_uart1) -+ bcm63xx_uart_register(1); -+ -+ if (board.has_pccard) -+ bcm63xx_pcmcia_register(); -+ -+ if (board.has_enet0 && -+ !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr)) -+ bcm63xx_enet_register(0, &board.enet0); -+ -+ if (board.has_enet1 && -+ !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr)) -+ bcm63xx_enet_register(1, &board.enet1); -+ -+ if (board.has_enetsw && -+ !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr)) -+ bcm63xx_enetsw_register(&board.enetsw); -+ -+ if (board.has_usbd) -+ bcm63xx_usbd_register(&board.usbd); -+ -+ if (board.has_ehci0) -+ bcm63xx_ehci_register(); -+ -+ if (board.has_ohci0) -+ bcm63xx_ohci_register(); -+ -+ /* Generate MAC address for WLAN and register our SPROM, -+ * do this after registering enet devices -+ */ -+#ifdef CONFIG_SSB_PCIHOST -+ if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) { -+ memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); -+ memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); -+ if (ssb_arch_register_fallback_sprom( -+ &bcm63xx_get_fallback_sprom) < 0) -+ pr_err(PFX "failed to register fallback SPROM\n"); -+ } -+#endif -+ -+ bcm63xx_spi_register(); -+ -+ bcm63xx_hsspi_register(); -+ -+ bcm63xx_flash_register(); -+ -+ bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); -+ bcm63xx_led_data.leds = board.leds; -+ -+ platform_device_register(&bcm63xx_gpio_leds); -+ -+ if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) -+ gpio_request_one(board.ephy_reset_gpio, -+ board.ephy_reset_gpio_flags, "ephy-reset"); -+ -+ return 0; -+} ---- /dev/null -+++ b/arch/mips/bcm63xx/boards/board_common.h -@@ -0,0 +1,8 @@ -+#ifndef __BOARD_COMMON_H -+#define __BOARD_COMMON_H -+ -+#include -+ -+void board_early_setup(const struct board_info *board); -+ -+#endif /* __BOARD_COMMON_H */ diff --git a/target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch deleted file mode 100644 index 7f9479b825..0000000000 --- a/target/linux/bcm63xx/patches-4.14/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch +++ /dev/null @@ -1,100 +0,0 @@ -From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 9 Mar 2014 04:08:06 +0100 -Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board - setup - -Pass a mac address allocator to board setup code to allow board -implementations to work with third party bootloaders not using nvram -for configuration storage. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 3 ++- - arch/mips/bcm63xx/boards/board_common.c | 16 ++++++++++------ - arch/mips/bcm63xx/boards/board_common.h | 3 ++- - 3 files changed, 14 insertions(+), 8 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -727,7 +727,8 @@ void __init board_prom_init(void) - if (strncmp(board_name, bcm963xx_boards[i]->name, 16)) - continue; - /* copy, board desc array is marked initdata */ -- board_early_setup(bcm963xx_boards[i]); -+ board_early_setup(bcm963xx_boards[i], -+ bcm63xx_nvram_get_mac_address); - break; - } - ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -18,7 +18,6 @@ - #include - #include - #include --#include - #include - #include - #include -@@ -81,15 +80,20 @@ const char *board_get_name(void) - return board.name; - } - -+static int (*board_get_mac_address)(u8 mac[ETH_ALEN]); -+ - /* - * setup board for device registration - */ --void __init board_early_setup(const struct board_info *target) -+void __init board_early_setup(const struct board_info *target, -+ int (*get_mac_address)(u8 mac[ETH_ALEN])) - { - u32 val; - - memcpy(&board, target, sizeof(board)); - -+ board_get_mac_address = get_mac_address; -+ - /* setup pin multiplexing depending on board enabled device, - * this has to be done this early since PCI init is done - * inside arch_initcall */ -@@ -162,15 +166,15 @@ int __init board_register_devices(void) - bcm63xx_pcmcia_register(); - - if (board.has_enet0 && -- !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr)) -+ !board_get_mac_address(board.enet0.mac_addr)) - bcm63xx_enet_register(0, &board.enet0); - - if (board.has_enet1 && -- !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr)) -+ !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - - if (board.has_enetsw && -- !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr)) -+ !board_get_mac_address(board.enetsw.mac_addr)) - bcm63xx_enetsw_register(&board.enetsw); - - if (board.has_usbd) -@@ -186,7 +190,7 @@ int __init board_register_devices(void) - * do this after registering enet devices - */ - #ifdef CONFIG_SSB_PCIHOST -- if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) { -+ if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { - memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); - if (ssb_arch_register_fallback_sprom( ---- a/arch/mips/bcm63xx/boards/board_common.h -+++ b/arch/mips/bcm63xx/boards/board_common.h -@@ -3,6 +3,7 @@ - - #include - --void board_early_setup(const struct board_info *board); -+void board_early_setup(const struct board_info *board, -+ int (*get_mac_address)(u8 mac[ETH_ALEN])); - - #endif /* __BOARD_COMMON_H */ diff --git a/target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch b/target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch deleted file mode 100644 index fe6c6d2909..0000000000 --- a/target/linux/bcm63xx/patches-4.14/309-cfe_version_mod.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -707,10 +707,20 @@ void __init board_prom_init(void) - - /* dump cfe version */ - cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; -- if (!memcmp(cfe, "cfe-v", 5)) -- snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u", -- cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]); -- else -+ if (strstarts(cfe, "cfe-")) { -+ if(cfe[4] == 'v') { -+ if(cfe[5] == 'd') -+ snprintf(cfe_version, 11, "%s", (char *) &cfe[5]); -+ else if (cfe[10] > 0) -+ snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u", -+ cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]); -+ else -+ snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u", -+ cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]); -+ } else { -+ snprintf(cfe_version, 12, "%s", (char *) &cfe[4]); -+ } -+ } else - strcpy(cfe_version, "unknown"); - pr_info("CFE version: %s\n", cfe_version); - diff --git a/target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch b/target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch deleted file mode 100644 index 0e4e759ab9..0000000000 --- a/target/linux/bcm63xx/patches-4.14/310-cfe_simplify_detection.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h -@@ -2,6 +2,8 @@ - #ifndef BCM63XX_BOARD_H_ - #define BCM63XX_BOARD_H_ - -+#include -+ - const char *board_get_name(void); - - void board_prom_init(void); -@@ -10,4 +12,8 @@ void board_setup(void); - - int board_register_devices(void); - -+static inline bool bcm63xx_is_cfe_present(void) { -+ return fw_arg3 == 0x43464531; -+} -+ - #endif /* ! BCM63XX_BOARD_H_ */ diff --git a/target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch b/target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch deleted file mode 100644 index bca6adbf3c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/311-bcm63xxpart_use_cfedetection.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/drivers/mtd/bcm63xxpart.c -+++ b/drivers/mtd/bcm63xxpart.c -@@ -35,6 +35,8 @@ - #include - #include - #include -+ -+#include - - #define BCM963XX_CFE_BLOCK_SIZE SZ_64K /* always at least 64KiB */ - -@@ -46,30 +48,6 @@ - #define STR_NULL_TERMINATE(x) \ - do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0) - --static int bcm63xx_detect_cfe(struct mtd_info *master) --{ -- char buf[9]; -- int ret; -- size_t retlen; -- -- ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen, -- (void *)buf); -- buf[retlen] = 0; -- -- if (ret) -- return ret; -- -- if (strncmp("cfe-v", buf, 5) == 0) -- return 0; -- -- /* very old CFE's do not have the cfe-v string, so check for magic */ -- ret = mtd_read(master, BCM963XX_CFE_MAGIC_OFFSET, 8, &retlen, -- (void *)buf); -- buf[retlen] = 0; -- -- return strncmp("CFE1CFE1", buf, 8); --} -- - static int bcm63xx_read_nvram(struct mtd_info *master, - struct bcm963xx_nvram *nvram) - { -@@ -152,7 +130,7 @@ static int bcm63xx_parse_cfe_partitions( - struct bcm963xx_nvram *nvram = NULL; - int ret; - -- if (bcm63xx_detect_cfe(master)) -+ if (!bcm63xx_is_cfe_present()) - return -EINVAL; - - nvram = vzalloc(sizeof(*nvram)); diff --git a/target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch deleted file mode 100644 index 7235d1f96b..0000000000 --- a/target/linux/bcm63xx/patches-4.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch +++ /dev/null @@ -1,455 +0,0 @@ -From 301744ecbeece89ab3a9d6beef7802fa22598f00 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 30 Nov 2014 14:53:12 +0100 -Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq - controller - -Signed-off-by: Jonas Gorski ---- - .../brcm,bcm6345-periph-intc.txt | 50 +++ - drivers/irqchip/Kconfig | 4 + - drivers/irqchip/Makefile | 1 + - drivers/irqchip/irq-bcm6345-periph.c | 339 ++++++++++++++++++++ - include/linux/irqchip/irq-bcm6345-periph.h | 16 + - 5 files changed, 410 insertions(+) - create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt - create mode 100644 drivers/irqchip/irq-bcm6345-periph.c - create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h - ---- /dev/null -+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt -@@ -0,0 +1,50 @@ -+Broadcom BCM6345 Level 1 periphery interrupt controller -+ -+This block is a interrupt controller that is typically connected directly -+to one of the HW INT lines on each CPU. Every BCM63XX xDSL chip since -+BCM6345 has contained this hardware. -+ -+Key elements of the hardware design include: -+ -+- 32, 64, or 128 incoming level IRQ lines -+ -+- All onchip peripherals are wired directly to an L2 input -+ -+- A separate instance of the register set for each CPU, allowing individual -+ peripheral IRQs to be routed to any CPU -+ -+- No atomic mask/unmask operations -+ -+- No polarity/level/edge settings -+ -+- No FIFO or priority encoder logic; software is expected to read all -+ 1-4 status words to determine which IRQs are pending -+ -+Required properties: -+ -+- compatible: Should be "brcm,bcm6345-periph-intc". -+- reg: Specifies the base physical address and size of the registers. -+ Multiple register addresses may be specified, and must match the amount of -+ parent interrupts. -+- interrupt-controller: Identifies the node as an interrupt controller. -+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt -+ source, should be 1. -+- interrupt-parent: Specifies the phandle to the parent interrupt controller -+ this one is cascaded from. -+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller -+ node, valid values depend on the type of parent interrupt controller. -+ Multiple lines are used to route interrupts to different cpus, with the first -+ assumed to be for the boot CPU. -+ -+Example: -+ -+periph_intc: interrupt-controller@f0406800 { -+ compatible = "brcm,bcm6345-periph-intc"; -+ reg = <0x10000020 0x10>, <0x10000030 0x10>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ -+ interrupt-parent = <&cpu_intc>; -+ interrupts = <2>, <3>; -+}; ---- a/drivers/irqchip/Kconfig -+++ b/drivers/irqchip/Kconfig -@@ -114,6 +114,10 @@ config BRCMSTB_L2_IRQ - select GENERIC_IRQ_CHIP - select IRQ_DOMAIN - -+config BCM6345_PERIPH_IRQ -+ bool -+ select IRQ_DOMAIN -+ - config DW_APB_ICTL - bool - select GENERIC_IRQ_CHIP ---- a/drivers/irqchip/Makefile -+++ b/drivers/irqchip/Makefile -@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP) += irq-mmp.o - obj-$(CONFIG_IRQ_MXS) += irq-mxs.o - obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o - obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o -+obj-$(CONFIG_BCM6345_PERIPH_IRQ) += irq-bcm6345-periph.o - obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o - obj-$(CONFIG_METAG) += irq-metag-ext.o - obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o ---- /dev/null -+++ b/drivers/irqchip/irq-bcm6345-periph.c -@@ -0,0 +1,339 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2014 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_BCM63XX -+#include -+ -+#define VIRQ_BASE IRQ_INTERNAL_BASE -+#else -+#define VIRQ_BASE 0 -+#endif -+ -+#define MAX_WORDS 4 -+#define MAX_PARENT_IRQS 2 -+#define IRQS_PER_WORD 32 -+ -+struct intc_block { -+ int parent_irq; -+ void __iomem *base; -+ void __iomem *en_reg[MAX_WORDS]; -+ void __iomem *status_reg[MAX_WORDS]; -+ u32 mask_cache[MAX_WORDS]; -+}; -+ -+struct intc_data { -+ struct irq_chip chip; -+ struct intc_block block[MAX_PARENT_IRQS]; -+ -+ int num_words; -+ -+ struct irq_domain *domain; -+ raw_spinlock_t lock; -+}; -+ -+static void bcm6345_periph_irq_handle(struct irq_desc *desc) -+{ -+ struct intc_data *data = irq_desc_get_handler_data(desc); -+ struct irq_chip *chip = irq_desc_get_chip(desc); -+ struct intc_block *block; -+ unsigned int irq = irq_desc_get_irq(desc); -+ unsigned int idx; -+ -+ chained_irq_enter(chip, desc); -+ -+ for (idx = 0; idx < MAX_PARENT_IRQS; idx++) -+ if (irq == data->block[idx].parent_irq) -+ block = &data->block[idx]; -+ -+ for (idx = 0; idx < data->num_words; idx++) { -+ int base = idx * IRQS_PER_WORD; -+ unsigned long pending; -+ int hw_irq; -+ -+ raw_spin_lock(&data->lock); -+ pending = __raw_readl(block->en_reg[idx]) & -+ __raw_readl(block->status_reg[idx]); -+ raw_spin_unlock(&data->lock); -+ -+ for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) { -+ int virq; -+ -+ virq = irq_find_mapping(data->domain, base + hw_irq); -+ generic_handle_irq(virq); -+ } -+ } -+ -+ chained_irq_exit(chip, desc); -+} -+ -+static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit, -+ bool enable) -+{ -+ u32 val; -+ -+ val = __raw_readl(block->en_reg[reg]); -+ if (enable) -+ val |= BIT(bit); -+ else -+ val &= ~BIT(bit); -+ __raw_writel(val, block->en_reg[reg]); -+} -+ -+static void bcm6345_periph_irq_mask(struct irq_data *data) -+{ -+ unsigned int i, reg, bit; -+ struct intc_data *priv = data->domain->host_data; -+ irq_hw_number_t hwirq = irqd_to_hwirq(data); -+ -+ reg = hwirq / IRQS_PER_WORD; -+ bit = hwirq % IRQS_PER_WORD; -+ -+ raw_spin_lock(&priv->lock); -+ for (i = 0; i < MAX_PARENT_IRQS; i++) { -+ struct intc_block *block = &priv->block[i]; -+ -+ if (!block->parent_irq) -+ break; -+ -+ __bcm6345_periph_enable(block, reg, bit, false); -+ } -+ raw_spin_unlock(&priv->lock); -+} -+ -+static void bcm6345_periph_irq_unmask(struct irq_data *data) -+{ -+ struct intc_data *priv = data->domain->host_data; -+ irq_hw_number_t hwirq = irqd_to_hwirq(data); -+ unsigned int i, reg, bit; -+ -+ reg = hwirq / IRQS_PER_WORD; -+ bit = hwirq % IRQS_PER_WORD; -+ -+ raw_spin_lock(&priv->lock); -+ for (i = 0; i < MAX_PARENT_IRQS; i++) { -+ struct intc_block *block = &priv->block[i]; -+ -+ if (!block->parent_irq) -+ break; -+ -+ if (block->mask_cache[reg] & BIT(bit)) -+ __bcm6345_periph_enable(block, reg, bit, true); -+ else -+ __bcm6345_periph_enable(block, reg, bit, false); -+ } -+ raw_spin_unlock(&priv->lock); -+} -+ -+#ifdef CONFIG_SMP -+static int bcm6345_periph_set_affinity(struct irq_data *data, -+ const struct cpumask *mask, bool force) -+{ -+ irq_hw_number_t hwirq = irqd_to_hwirq(data); -+ struct intc_data *priv = data->domain->host_data; -+ unsigned int i, reg, bit; -+ unsigned long flags; -+ bool enabled; -+ int cpu; -+ -+ reg = hwirq / IRQS_PER_WORD; -+ bit = hwirq % IRQS_PER_WORD; -+ -+ /* we could route to more than one cpu, but performance -+ suffers, so fix it to one. -+ */ -+ cpu = cpumask_any_and(mask, cpu_online_mask); -+ if (cpu >= nr_cpu_ids) -+ return -EINVAL; -+ -+ if (cpu >= MAX_PARENT_IRQS) -+ return -EINVAL; -+ -+ if (!priv->block[cpu].parent_irq) -+ return -EINVAL; -+ -+ raw_spin_lock_irqsave(&priv->lock, flags); -+ enabled = !irqd_irq_masked(data); -+ for (i = 0; i < MAX_PARENT_IRQS; i++) { -+ struct intc_block *block = &priv->block[i]; -+ -+ if (!block->parent_irq) -+ break; -+ -+ if (i == cpu) { -+ block->mask_cache[reg] |= BIT(bit); -+ __bcm6345_periph_enable(block, reg, bit, enabled); -+ } else { -+ block->mask_cache[reg] &= ~BIT(bit); -+ __bcm6345_periph_enable(block, reg, bit, false); -+ } -+ } -+ raw_spin_unlock_irqrestore(&priv->lock, flags); -+ -+ return 0; -+} -+#endif -+ -+static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq, -+ irq_hw_number_t hw) -+{ -+ struct intc_data *priv = d->host_data; -+ -+ irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq); -+ -+ return 0; -+} -+ -+static const struct irq_domain_ops bcm6345_periph_domain_ops = { -+ .xlate = irq_domain_xlate_onecell, -+ .map = bcm6345_periph_map, -+}; -+ -+static int __init __bcm6345_periph_intc_init(struct device_node *node, -+ int num_blocks, int *irq, -+ void __iomem **base, int num_words) -+{ -+ struct intc_data *data; -+ unsigned int i, w, status_offset; -+ -+ data = kzalloc(sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ raw_spin_lock_init(&data->lock); -+ -+ status_offset = num_words * sizeof(u32); -+ -+ for (i = 0; i < num_blocks; i++) { -+ struct intc_block *block = &data->block[i]; -+ -+ block->parent_irq = irq[i]; -+ block->base = base[i]; -+ -+ for (w = 0; w < num_words; w++) { -+ int word_offset = sizeof(u32) * ((num_words - w) - 1); -+ -+ block->en_reg[w] = base[i] + word_offset; -+ block->status_reg[w] = base[i] + status_offset; -+ block->status_reg[w] += word_offset; -+ -+ /* route all interrupts to line 0 by default */ -+ if (i == 0) -+ block->mask_cache[w] = 0xffffffff; -+ } -+ -+ irq_set_handler_data(block->parent_irq, data); -+ irq_set_chained_handler(block->parent_irq, -+ bcm6345_periph_irq_handle); -+ } -+ -+ data->num_words = num_words; -+ -+ data->chip.name = "bcm6345-periph-intc"; -+ data->chip.irq_mask = bcm6345_periph_irq_mask; -+ data->chip.irq_unmask = bcm6345_periph_irq_unmask; -+ -+#ifdef CONFIG_SMP -+ if (num_blocks > 1) -+ data->chip.irq_set_affinity = bcm6345_periph_set_affinity; -+#endif -+ -+ data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words, -+ VIRQ_BASE, -+ &bcm6345_periph_domain_ops, data); -+ if (!data->domain) { -+ kfree(data); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+void __init bcm6345_periph_intc_init(int num_blocks, int *irq, -+ void __iomem **base, int num_words) -+{ -+ __bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words); -+} -+ -+#ifdef CONFIG_OF -+static int __init bcm6345_periph_of_init(struct device_node *node, -+ struct device_node *parent) -+{ -+ struct resource res; -+ int num_irqs, ret = -EINVAL; -+ int irqs[MAX_PARENT_IRQS] = { 0 }; -+ void __iomem *bases[MAX_PARENT_IRQS] = { NULL }; -+ int words = 0; -+ int i; -+ -+ num_irqs = of_irq_count(node); -+ -+ if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS) -+ return -EINVAL; -+ -+ for (i = 0; i < num_irqs; i++) { -+ resource_size_t size; -+ -+ irqs[i] = irq_of_parse_and_map(node, i); -+ if (!irqs[i]) -+ goto out_unmap; -+ -+ if (of_address_to_resource(node, i, &res)) -+ goto out_unmap; -+ -+ size = resource_size(&res); -+ switch (size) { -+ case 8: -+ case 16: -+ case 32: -+ size = size / 8; -+ break; -+ default: -+ goto out_unmap; -+ } -+ -+ if (words && words != size) { -+ ret = -EINVAL; -+ goto out_unmap; -+ } -+ words = size; -+ -+ bases[i] = of_iomap(node, i); -+ if (!bases[i]) { -+ ret = -ENOMEM; -+ goto out_unmap; -+ } -+ } -+ -+ ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words); -+ if (!ret) -+ return 0; -+ -+out_unmap: -+ for (i = 0; i < num_irqs; i++) { -+ iounmap(bases[i]); -+ irq_dispose_mapping(irqs[i]); -+ } -+ -+ return ret; -+} -+ -+IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-l1-intc", -+ bcm6345_periph_of_init); -+#endif ---- /dev/null -+++ b/include/linux/irqchip/irq-bcm6345-periph.h -@@ -0,0 +1,16 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Maxime Bizon -+ * Copyright (C) 2008 Nicolas Schichan -+ */ -+ -+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H -+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H -+ -+void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base, -+ int num_words); -+ -+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */ diff --git a/target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch deleted file mode 100644 index b5df0351b1..0000000000 --- a/target/linux/bcm63xx/patches-4.14/321-irqchip-add-support-for-bcm6345-style-external-inter.patch +++ /dev/null @@ -1,394 +0,0 @@ -From cf908990d4a8ccdb73ee4484aa8cadad379ca314 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 30 Nov 2014 14:54:27 +0100 -Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external - interrupt controller - -Signed-off-by: Jonas Gorski ---- - .../interrupt-controller/brcm,bcm6345-ext-intc.txt | 29 ++ - drivers/irqchip/Kconfig | 4 + - drivers/irqchip/Makefile | 1 + - drivers/irqchip/irq-bcm6345-ext.c | 287 ++++++++++++++++++++ - include/linux/irqchip/irq-bcm6345-ext.h | 14 + - 5 files changed, 335 insertions(+) - create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt - create mode 100644 drivers/irqchip/irq-bcm6345-ext.c - create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h - ---- /dev/null -+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt -@@ -0,0 +1,29 @@ -+Broadcom BCM6345-style external interrupt controller -+ -+Required properties: -+ -+- compatible: Should be "brcm,bcm6345-ext-intc" or "brcm,bcm6318-ext-intc". -+- reg: Specifies the base physical addresses and size of the registers. -+- interrupt-controller: identifies the node as an interrupt controller. -+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt -+ source, Should be 2. -+- interrupt-parent: Specifies the phandle to the parent interrupt controller -+ this one is cascaded from. -+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller -+ node, valid values depend on the type of parent interrupt controller. -+ -+Optional properties: -+ -+- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the -+ register. Defaults to 4. -+ -+Example: -+ -+ext_intc: interrupt-controller@10000018 { -+ compatible = "brcm,bcm6345-ext-intc"; -+ interrupt-parent = <&periph_intc>; -+ #interrupt-cells = <2>; -+ reg = <0x10000018 0x4>; -+ interrupt-controller; -+ interrupts = <24>, <25>, <26>, <27>; -+}; ---- a/drivers/irqchip/Kconfig -+++ b/drivers/irqchip/Kconfig -@@ -114,6 +114,10 @@ config BRCMSTB_L2_IRQ - select GENERIC_IRQ_CHIP - select IRQ_DOMAIN - -+config BCM6345_EXT_IRQ -+ bool -+ select IRQ_DOMAIN -+ - config BCM6345_PERIPH_IRQ - bool - select IRQ_DOMAIN ---- a/drivers/irqchip/Makefile -+++ b/drivers/irqchip/Makefile -@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_MMP) += irq-mmp.o - obj-$(CONFIG_IRQ_MXS) += irq-mxs.o - obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o - obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o -+obj-$(CONFIG_BCM6345_EXT_IRQ) += irq-bcm6345-ext.o - obj-$(CONFIG_BCM6345_PERIPH_IRQ) += irq-bcm6345-periph.o - obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o - obj-$(CONFIG_METAG) += irq-metag-ext.o ---- /dev/null -+++ b/drivers/irqchip/irq-bcm6345-ext.c -@@ -0,0 +1,301 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2014 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_BCM63XX -+#include -+ -+#define VIRQ_BASE IRQ_EXTERNAL_BASE -+#else -+#define VIRQ_BASE 0 -+#endif -+ -+#define MAX_IRQS 4 -+ -+#define EXTIRQ_CFG_SENSE 0 -+#define EXTIRQ_CFG_STAT 1 -+#define EXTIRQ_CFG_CLEAR 2 -+#define EXTIRQ_CFG_MASK 3 -+#define EXTIRQ_CFG_BOTHEDGE 4 -+#define EXTIRQ_CFG_LEVELSENSE 5 -+ -+struct intc_data { -+ struct irq_chip chip; -+ struct irq_domain *domain; -+ raw_spinlock_t lock; -+ -+ int parent_irq[MAX_IRQS]; -+ void __iomem *reg; -+ int shift; -+ unsigned int toggle_clear_on_ack:1; -+}; -+ -+static void bcm6345_ext_intc_irq_handle(struct irq_desc *desc) -+{ -+ struct intc_data *data = irq_desc_get_handler_data(desc); -+ struct irq_chip *chip = irq_desc_get_chip(desc); -+ unsigned int irq = irq_desc_get_irq(desc); -+ unsigned int idx; -+ -+ chained_irq_enter(chip, desc); -+ -+ for (idx = 0; idx < MAX_IRQS; idx++) { -+ if (data->parent_irq[idx] != irq) -+ continue; -+ -+ generic_handle_irq(irq_find_mapping(data->domain, idx)); -+ } -+ -+ chained_irq_exit(chip, desc); -+} -+ -+static void bcm6345_ext_intc_irq_ack(struct irq_data *data) -+{ -+ struct intc_data *priv = data->domain->host_data; -+ irq_hw_number_t hwirq = irqd_to_hwirq(data); -+ u32 reg; -+ -+ raw_spin_lock(&priv->lock); -+ reg = __raw_readl(priv->reg); -+ __raw_writel(reg | (1 << (hwirq + EXTIRQ_CFG_CLEAR * priv->shift)), -+ priv->reg); -+ if (priv->toggle_clear_on_ack) -+ __raw_writel(reg, priv->reg); -+ raw_spin_unlock(&priv->lock); -+} -+ -+static void bcm6345_ext_intc_irq_mask(struct irq_data *data) -+{ -+ struct intc_data *priv = data->domain->host_data; -+ irq_hw_number_t hwirq = irqd_to_hwirq(data); -+ u32 reg; -+ -+ raw_spin_lock(&priv->lock); -+ reg = __raw_readl(priv->reg); -+ reg &= ~(1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift)); -+ __raw_writel(reg, priv->reg); -+ raw_spin_unlock(&priv->lock); -+} -+ -+static void bcm6345_ext_intc_irq_unmask(struct irq_data *data) -+{ -+ struct intc_data *priv = data->domain->host_data; -+ irq_hw_number_t hwirq = irqd_to_hwirq(data); -+ u32 reg; -+ -+ raw_spin_lock(&priv->lock); -+ reg = __raw_readl(priv->reg); -+ reg |= 1 << (hwirq + EXTIRQ_CFG_MASK * priv->shift); -+ __raw_writel(reg, priv->reg); -+ raw_spin_unlock(&priv->lock); -+} -+ -+static int bcm6345_ext_intc_set_type(struct irq_data *data, -+ unsigned int flow_type) -+{ -+ struct intc_data *priv = data->domain->host_data; -+ irq_hw_number_t hwirq = irqd_to_hwirq(data); -+ bool levelsense = 0, sense = 0, bothedge = 0; -+ u32 reg; -+ -+ flow_type &= IRQ_TYPE_SENSE_MASK; -+ -+ if (flow_type == IRQ_TYPE_NONE) -+ flow_type = IRQ_TYPE_LEVEL_LOW; -+ -+ switch (flow_type) { -+ case IRQ_TYPE_EDGE_BOTH: -+ bothedge = 1; -+ break; -+ -+ case IRQ_TYPE_EDGE_RISING: -+ sense = 1; -+ break; -+ -+ case IRQ_TYPE_EDGE_FALLING: -+ break; -+ -+ case IRQ_TYPE_LEVEL_HIGH: -+ levelsense = 1; -+ sense = 1; -+ break; -+ -+ case IRQ_TYPE_LEVEL_LOW: -+ levelsense = 1; -+ break; -+ -+ default: -+ pr_err("bogus flow type combination given!\n"); -+ return -EINVAL; -+ } -+ -+ raw_spin_lock(&priv->lock); -+ reg = __raw_readl(priv->reg); -+ -+ if (levelsense) -+ reg |= 1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift); -+ else -+ reg &= ~(1 << (hwirq + EXTIRQ_CFG_LEVELSENSE * priv->shift)); -+ if (sense) -+ reg |= 1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift); -+ else -+ reg &= ~(1 << (hwirq + EXTIRQ_CFG_SENSE * priv->shift)); -+ if (bothedge) -+ reg |= 1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift); -+ else -+ reg &= ~(1 << (hwirq + EXTIRQ_CFG_BOTHEDGE * priv->shift)); -+ -+ __raw_writel(reg, priv->reg); -+ raw_spin_unlock(&priv->lock); -+ -+ irqd_set_trigger_type(data, flow_type); -+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) -+ irq_set_handler_locked(data, handle_level_irq); -+ else -+ irq_set_handler_locked(data, handle_edge_irq); -+ -+ return 0; -+} -+ -+static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq, -+ irq_hw_number_t hw) -+{ -+ struct intc_data *priv = d->host_data; -+ -+ irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq); -+ -+ return 0; -+} -+ -+static const struct irq_domain_ops bcm6345_ext_domain_ops = { -+ .xlate = irq_domain_xlate_twocell, -+ .map = bcm6345_ext_intc_map, -+}; -+ -+static int __init __bcm6345_ext_intc_init(struct device_node *node, -+ int num_irqs, int *irqs, -+ void __iomem *reg, int shift, -+ bool toggle_clear_on_ack) -+{ -+ struct intc_data *data; -+ unsigned int i; -+ int start = VIRQ_BASE; -+ -+ data = kzalloc(sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ raw_spin_lock_init(&data->lock); -+ -+ for (i = 0; i < num_irqs; i++) { -+ data->parent_irq[i] = irqs[i]; -+ -+ irq_set_handler_data(irqs[i], data); -+ irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle); -+ } -+ -+ data->reg = reg; -+ data->shift = shift; -+ data->toggle_clear_on_ack = toggle_clear_on_ack; -+ -+ data->chip.name = "bcm6345-ext-intc"; -+ data->chip.irq_ack = bcm6345_ext_intc_irq_ack; -+ data->chip.irq_mask = bcm6345_ext_intc_irq_mask; -+ data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask; -+ data->chip.irq_set_type = bcm6345_ext_intc_set_type; -+ -+ /* -+ * If we have less than 4 irqs, this is the second controller on -+ * bcm63xx. So increase the VIRQ start to not overlap with the first -+ * one, but only do so if we actually use a non-zero start. -+ * -+ * This can be removed when bcm63xx has no legacy users anymore. -+ */ -+ if (start && num_irqs < 4) -+ start += 4; -+ -+ data->domain = irq_domain_add_simple(node, num_irqs, start, -+ &bcm6345_ext_domain_ops, data); -+ if (!data->domain) { -+ kfree(data); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg, -+ int shift) -+{ -+ __bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift, false); -+} -+ -+#ifdef CONFIG_OF -+static int __init bcm6345_ext_intc_of_init(struct device_node *node, -+ struct device_node *parent) -+{ -+ int num_irqs, ret = -EINVAL; -+ unsigned i; -+ void __iomem *base; -+ int irqs[MAX_IRQS] = { 0 }; -+ u32 shift; -+ bool toggle_clear_on_ack = false; -+ -+ num_irqs = of_irq_count(node); -+ -+ if (!num_irqs || num_irqs > MAX_IRQS) -+ return -EINVAL; -+ -+ if (of_property_read_u32(node, "brcm,field-width", &shift)) -+ shift = 4; -+ -+ /* on BCM6318 setting CLEAR seems to continuously mask interrupts */ -+ if (of_device_is_compatible(node, "brcm,bcm6318-ext-intc")) -+ toggle_clear_on_ack = true; -+ -+ for (i = 0; i < num_irqs; i++) { -+ irqs[i] = irq_of_parse_and_map(node, i); -+ if (!irqs[i]) { -+ ret = -ENOMEM; -+ goto out_unmap; -+ } -+ } -+ -+ base = of_iomap(node, 0); -+ if (!base) -+ goto out_unmap; -+ -+ ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift, -+ toggle_clear_on_ack); -+ if (!ret) -+ return 0; -+out_unmap: -+ iounmap(base); -+ -+ for (i = 0; i < num_irqs; i++) -+ irq_dispose_mapping(irqs[i]); -+ -+ return ret; -+} -+ -+IRQCHIP_DECLARE(bcm6318_ext_intc, "brcm,bcm6318-ext-intc", -+ bcm6345_ext_intc_of_init); -+IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc", -+ bcm6345_ext_intc_of_init); -+#endif ---- /dev/null -+++ b/include/linux/irqchip/irq-bcm6345-ext.h -@@ -0,0 +1,14 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2014 Jonas Gorski -+ */ -+ -+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H -+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H -+ -+void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift); -+ -+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */ diff --git a/target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch deleted file mode 100644 index d04d89cf62..0000000000 --- a/target/linux/bcm63xx/patches-4.14/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch +++ /dev/null @@ -1,695 +0,0 @@ -From d2d2489e0a4b740abd980e9d1cad952d15bc2d9e Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 30 Nov 2014 14:55:02 +0100 -Subject: [PATCH] MIPS: BCM63XX: switch to IRQ_DOMAIN - -Now that we have working IRQ_DOMAIN drivers for both interrupt controllers, -switch to using them. - -Signed-off-by: Jonas Gorski ---- - arch/mips/Kconfig | 3 + - arch/mips/bcm63xx/irq.c | 612 +++++++++--------------------------------------- - 2 files changed, 108 insertions(+), 507 deletions(-) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -272,6 +272,9 @@ config BCM63XX - select SYNC_R4K - select DMA_NONCOHERENT - select IRQ_MIPS_CPU -+ select BCM6345_EXT_IRQ -+ select BCM6345_PERIPH_IRQ -+ select IRQ_DOMAIN - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_HAS_EARLY_PRINTK ---- a/arch/mips/bcm63xx/irq.c -+++ b/arch/mips/bcm63xx/irq.c -@@ -11,7 +11,9 @@ - #include - #include - #include --#include -+#include -+#include -+#include - #include - #include - #include -@@ -19,544 +21,140 @@ - #include - #include - -- --static DEFINE_SPINLOCK(ipic_lock); --static DEFINE_SPINLOCK(epic_lock); -- --static u32 irq_stat_addr[2]; --static u32 irq_mask_addr[2]; --static void (*dispatch_internal)(int cpu); --static int is_ext_irq_cascaded; --static unsigned int ext_irq_count; --static unsigned int ext_irq_start, ext_irq_end; --static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2; --static void (*internal_irq_mask)(struct irq_data *d); --static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m); -- -- --static inline u32 get_ext_irq_perf_reg(int irq) --{ -- if (irq < 4) -- return ext_irq_cfg_reg1; -- return ext_irq_cfg_reg2; --} -- --static inline void handle_internal(int intbit) --{ -- if (is_ext_irq_cascaded && -- intbit >= ext_irq_start && intbit <= ext_irq_end) -- do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE); -- else -- do_IRQ(intbit + IRQ_INTERNAL_BASE); --} -- --static inline int enable_irq_for_cpu(int cpu, struct irq_data *d, -- const struct cpumask *m) --{ -- bool enable = cpu_online(cpu); -- --#ifdef CONFIG_SMP -- if (m) -- enable &= cpumask_test_cpu(cpu, m); -- else if (irqd_affinity_was_set(d)) -- enable &= cpumask_test_cpu(cpu, irq_data_get_affinity_mask(d)); --#endif -- return enable; --} -- --/* -- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not -- * prioritize any interrupt relatively to another. the static counter -- * will resume the loop where it ended the last time we left this -- * function. -- */ -- --#define BUILD_IPIC_INTERNAL(width) \ --void __dispatch_internal_##width(int cpu) \ --{ \ -- u32 pending[width / 32]; \ -- unsigned int src, tgt; \ -- bool irqs_pending = false; \ -- static unsigned int i[2]; \ -- unsigned int *next = &i[cpu]; \ -- unsigned long flags; \ -- \ -- /* read registers in reverse order */ \ -- spin_lock_irqsave(&ipic_lock, flags); \ -- for (src = 0, tgt = (width / 32); src < (width / 32); src++) { \ -- u32 val; \ -- \ -- val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \ -- val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \ -- pending[--tgt] = val; \ -- \ -- if (val) \ -- irqs_pending = true; \ -- } \ -- spin_unlock_irqrestore(&ipic_lock, flags); \ -- \ -- if (!irqs_pending) \ -- return; \ -- \ -- while (1) { \ -- unsigned int to_call = *next; \ -- \ -- *next = (*next + 1) & (width - 1); \ -- if (pending[to_call / 32] & (1 << (to_call & 0x1f))) { \ -- handle_internal(to_call); \ -- break; \ -- } \ -- } \ --} \ -- \ --static void __internal_irq_mask_##width(struct irq_data *d) \ --{ \ -- u32 val; \ -- unsigned irq = d->irq - IRQ_INTERNAL_BASE; \ -- unsigned reg = (irq / 32) ^ (width/32 - 1); \ -- unsigned bit = irq & 0x1f; \ -- unsigned long flags; \ -- int cpu; \ -- \ -- spin_lock_irqsave(&ipic_lock, flags); \ -- for_each_present_cpu(cpu) { \ -- if (!irq_mask_addr[cpu]) \ -- break; \ -- \ -- val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\ -- val &= ~(1 << bit); \ -- bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\ -- } \ -- spin_unlock_irqrestore(&ipic_lock, flags); \ --} \ -- \ --static void __internal_irq_unmask_##width(struct irq_data *d, \ -- const struct cpumask *m) \ --{ \ -- u32 val; \ -- unsigned irq = d->irq - IRQ_INTERNAL_BASE; \ -- unsigned reg = (irq / 32) ^ (width/32 - 1); \ -- unsigned bit = irq & 0x1f; \ -- unsigned long flags; \ -- int cpu; \ -- \ -- spin_lock_irqsave(&ipic_lock, flags); \ -- for_each_present_cpu(cpu) { \ -- if (!irq_mask_addr[cpu]) \ -- break; \ -- \ -- val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\ -- if (enable_irq_for_cpu(cpu, d, m)) \ -- val |= (1 << bit); \ -- else \ -- val &= ~(1 << bit); \ -- bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\ -- } \ -- spin_unlock_irqrestore(&ipic_lock, flags); \ --} -- --BUILD_IPIC_INTERNAL(32); --BUILD_IPIC_INTERNAL(64); -- --asmlinkage void plat_irq_dispatch(void) --{ -- u32 cause; -- -- do { -- cause = read_c0_cause() & read_c0_status() & ST0_IM; -- -- if (!cause) -- break; -- -- if (cause & CAUSEF_IP7) -- do_IRQ(7); -- if (cause & CAUSEF_IP0) -- do_IRQ(0); -- if (cause & CAUSEF_IP1) -- do_IRQ(1); -- if (cause & CAUSEF_IP2) -- dispatch_internal(0); -- if (is_ext_irq_cascaded) { -- if (cause & CAUSEF_IP3) -- dispatch_internal(1); -- } else { -- if (cause & CAUSEF_IP3) -- do_IRQ(IRQ_EXT_0); -- if (cause & CAUSEF_IP4) -- do_IRQ(IRQ_EXT_1); -- if (cause & CAUSEF_IP5) -- do_IRQ(IRQ_EXT_2); -- if (cause & CAUSEF_IP6) -- do_IRQ(IRQ_EXT_3); -- } -- } while (1); --} -- --/* -- * internal IRQs operations: only mask/unmask on PERF irq mask -- * register. -- */ --static void bcm63xx_internal_irq_mask(struct irq_data *d) --{ -- internal_irq_mask(d); --} -- --static void bcm63xx_internal_irq_unmask(struct irq_data *d) --{ -- internal_irq_unmask(d, NULL); --} -- --/* -- * external IRQs operations: mask/unmask and clear on PERF external -- * irq control register. -- */ --static void bcm63xx_external_irq_mask(struct irq_data *d) --{ -- unsigned int irq = d->irq - IRQ_EXTERNAL_BASE; -- u32 reg, regaddr; -- unsigned long flags; -- -- regaddr = get_ext_irq_perf_reg(irq); -- spin_lock_irqsave(&epic_lock, flags); -- reg = bcm_perf_readl(regaddr); -- -- if (BCMCPU_IS_6348()) -- reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4); -- else -- reg &= ~EXTIRQ_CFG_MASK(irq % 4); -- -- bcm_perf_writel(reg, regaddr); -- spin_unlock_irqrestore(&epic_lock, flags); -- -- if (is_ext_irq_cascaded) -- internal_irq_mask(irq_get_irq_data(irq + ext_irq_start)); --} -- --static void bcm63xx_external_irq_unmask(struct irq_data *d) --{ -- unsigned int irq = d->irq - IRQ_EXTERNAL_BASE; -- u32 reg, regaddr; -- unsigned long flags; -- -- regaddr = get_ext_irq_perf_reg(irq); -- spin_lock_irqsave(&epic_lock, flags); -- reg = bcm_perf_readl(regaddr); -- -- if (BCMCPU_IS_6348()) -- reg |= EXTIRQ_CFG_MASK_6348(irq % 4); -- else -- reg |= EXTIRQ_CFG_MASK(irq % 4); -- -- bcm_perf_writel(reg, regaddr); -- spin_unlock_irqrestore(&epic_lock, flags); -- -- if (is_ext_irq_cascaded) -- internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start), -- NULL); --} -- --static void bcm63xx_external_irq_clear(struct irq_data *d) --{ -- unsigned int irq = d->irq - IRQ_EXTERNAL_BASE; -- u32 reg, regaddr; -- unsigned long flags; -- -- regaddr = get_ext_irq_perf_reg(irq); -- spin_lock_irqsave(&epic_lock, flags); -- reg = bcm_perf_readl(regaddr); -- -- if (BCMCPU_IS_6348()) -- reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4); -- else -- reg |= EXTIRQ_CFG_CLEAR(irq % 4); -- -- bcm_perf_writel(reg, regaddr); -- spin_unlock_irqrestore(&epic_lock, flags); --} -- --static int bcm63xx_external_irq_set_type(struct irq_data *d, -- unsigned int flow_type) --{ -- unsigned int irq = d->irq - IRQ_EXTERNAL_BASE; -- u32 reg, regaddr; -- int levelsense, sense, bothedge; -- unsigned long flags; -- -- flow_type &= IRQ_TYPE_SENSE_MASK; -- -- if (flow_type == IRQ_TYPE_NONE) -- flow_type = IRQ_TYPE_LEVEL_LOW; -- -- levelsense = sense = bothedge = 0; -- switch (flow_type) { -- case IRQ_TYPE_EDGE_BOTH: -- bothedge = 1; -- break; -- -- case IRQ_TYPE_EDGE_RISING: -- sense = 1; -- break; -- -- case IRQ_TYPE_EDGE_FALLING: -- break; -- -- case IRQ_TYPE_LEVEL_HIGH: -- levelsense = 1; -- sense = 1; -- break; -- -- case IRQ_TYPE_LEVEL_LOW: -- levelsense = 1; -- break; -- -- default: -- pr_err("bogus flow type combination given !\n"); -- return -EINVAL; -- } -- -- regaddr = get_ext_irq_perf_reg(irq); -- spin_lock_irqsave(&epic_lock, flags); -- reg = bcm_perf_readl(regaddr); -- irq %= 4; -- -- switch (bcm63xx_get_cpu_id()) { -- case BCM6348_CPU_ID: -- if (levelsense) -- reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq); -- else -- reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq); -- if (sense) -- reg |= EXTIRQ_CFG_SENSE_6348(irq); -- else -- reg &= ~EXTIRQ_CFG_SENSE_6348(irq); -- if (bothedge) -- reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq); -- else -- reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq); -- break; -- -- case BCM3368_CPU_ID: -- case BCM6328_CPU_ID: -- case BCM6338_CPU_ID: -- case BCM6345_CPU_ID: -- case BCM6358_CPU_ID: -- case BCM6362_CPU_ID: -- case BCM6368_CPU_ID: -- if (levelsense) -- reg |= EXTIRQ_CFG_LEVELSENSE(irq); -- else -- reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); -- if (sense) -- reg |= EXTIRQ_CFG_SENSE(irq); -- else -- reg &= ~EXTIRQ_CFG_SENSE(irq); -- if (bothedge) -- reg |= EXTIRQ_CFG_BOTHEDGE(irq); -- else -- reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); -- break; -- default: -- BUG(); -- } -- -- bcm_perf_writel(reg, regaddr); -- spin_unlock_irqrestore(&epic_lock, flags); -- -- irqd_set_trigger_type(d, flow_type); -- if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) -- irq_set_handler_locked(d, handle_level_irq); -- else -- irq_set_handler_locked(d, handle_edge_irq); -- -- return IRQ_SET_MASK_OK_NOCOPY; --} -- --#ifdef CONFIG_SMP --static int bcm63xx_internal_set_affinity(struct irq_data *data, -- const struct cpumask *dest, -- bool force) --{ -- if (!irqd_irq_disabled(data)) -- internal_irq_unmask(data, dest); -- -- return 0; --} --#endif -- --static struct irq_chip bcm63xx_internal_irq_chip = { -- .name = "bcm63xx_ipic", -- .irq_mask = bcm63xx_internal_irq_mask, -- .irq_unmask = bcm63xx_internal_irq_unmask, --}; -- --static struct irq_chip bcm63xx_external_irq_chip = { -- .name = "bcm63xx_epic", -- .irq_ack = bcm63xx_external_irq_clear, -- -- .irq_mask = bcm63xx_external_irq_mask, -- .irq_unmask = bcm63xx_external_irq_unmask, -- -- .irq_set_type = bcm63xx_external_irq_set_type, --}; -- --static struct irqaction cpu_ip2_cascade_action = { -- .handler = no_action, -- .name = "cascade_ip2", -- .flags = IRQF_NO_THREAD, --}; -- --#ifdef CONFIG_SMP --static struct irqaction cpu_ip3_cascade_action = { -- .handler = no_action, -- .name = "cascade_ip3", -- .flags = IRQF_NO_THREAD, --}; --#endif -- --static struct irqaction cpu_ext_cascade_action = { -- .handler = no_action, -- .name = "cascade_extirq", -- .flags = IRQF_NO_THREAD, --}; -- --static void bcm63xx_init_irq(void) -+void __init arch_init_irq(void) - { -- int irq_bits; -- -- irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF); -- irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF); -- irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF); -- irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF); -+ void __iomem *periph_bases[2]; -+ void __iomem *ext_intc_bases[2]; -+ int periph_irq_count, periph_width, ext_irq_count, ext_shift; -+ int periph_irqs[2] = { 2, 3 }; -+ int ext_irqs[6]; -+ -+ periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF); -+ periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF); -+ ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF); -+ ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF); - - switch (bcm63xx_get_cpu_id()) { - case BCM3368_CPU_ID: -- irq_stat_addr[0] += PERF_IRQSTAT_3368_REG; -- irq_mask_addr[0] += PERF_IRQMASK_3368_REG; -- irq_stat_addr[1] = 0; -- irq_mask_addr[1] = 0; -- irq_bits = 32; -- ext_irq_count = 4; -- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368; -+ periph_bases[0] += PERF_IRQMASK_3368_REG; -+ periph_irq_count = 1; -+ periph_width = 1; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368; -+ ext_irq_count = 4; -+ ext_irqs[0] = BCM_3368_EXT_IRQ0; -+ ext_irqs[1] = BCM_3368_EXT_IRQ1; -+ ext_irqs[2] = BCM_3368_EXT_IRQ2; -+ ext_irqs[3] = BCM_3368_EXT_IRQ3; -+ ext_shift = 4; - break; - case BCM6328_CPU_ID: -- irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0); -- irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0); -- irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1); -- irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1); -- irq_bits = 64; -- ext_irq_count = 4; -- is_ext_irq_cascaded = 1; -- ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE; -- ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE; -- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328; -+ periph_bases[0] += PERF_IRQMASK_6328_REG(0); -+ periph_bases[1] += PERF_IRQMASK_6328_REG(1); -+ periph_irq_count = 2; -+ periph_width = 2; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328; -+ ext_irq_count = 4; -+ ext_irqs[0] = BCM_6328_EXT_IRQ0; -+ ext_irqs[1] = BCM_6328_EXT_IRQ1; -+ ext_irqs[2] = BCM_6328_EXT_IRQ2; -+ ext_irqs[3] = BCM_6328_EXT_IRQ3; -+ ext_shift = 4; - break; - case BCM6338_CPU_ID: -- irq_stat_addr[0] += PERF_IRQSTAT_6338_REG; -- irq_mask_addr[0] += PERF_IRQMASK_6338_REG; -- irq_stat_addr[1] = 0; -- irq_mask_addr[1] = 0; -- irq_bits = 32; -- ext_irq_count = 4; -- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338; -+ periph_bases[0] += PERF_IRQMASK_6338_REG; -+ periph_irq_count = 1; -+ periph_width = 1; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338; -+ ext_irq_count = 4; -+ ext_irqs[0] = 3; -+ ext_irqs[1] = 4; -+ ext_irqs[2] = 5; -+ ext_irqs[3] = 6; -+ ext_shift = 4; - break; - case BCM6345_CPU_ID: -- irq_stat_addr[0] += PERF_IRQSTAT_6345_REG; -- irq_mask_addr[0] += PERF_IRQMASK_6345_REG; -- irq_stat_addr[1] = 0; -- irq_mask_addr[1] = 0; -- irq_bits = 32; -- ext_irq_count = 4; -- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345; -+ periph_bases[0] += PERF_IRQMASK_6345_REG; -+ periph_irq_count = 1; -+ periph_width = 1; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345; -+ ext_irq_count = 4; -+ ext_irqs[0] = 3; -+ ext_irqs[1] = 4; -+ ext_irqs[2] = 5; -+ ext_irqs[3] = 6; -+ ext_shift = 4; - break; - case BCM6348_CPU_ID: -- irq_stat_addr[0] += PERF_IRQSTAT_6348_REG; -- irq_mask_addr[0] += PERF_IRQMASK_6348_REG; -- irq_stat_addr[1] = 0; -- irq_mask_addr[1] = 0; -- irq_bits = 32; -- ext_irq_count = 4; -- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348; -+ periph_bases[0] += PERF_IRQMASK_6348_REG; -+ periph_irq_count = 1; -+ periph_width = 1; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348; -+ ext_irq_count = 4; -+ ext_irqs[0] = 3; -+ ext_irqs[1] = 4; -+ ext_irqs[2] = 5; -+ ext_irqs[3] = 6; -+ ext_shift = 5; - break; - case BCM6358_CPU_ID: -- irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0); -- irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0); -- irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1); -- irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1); -- irq_bits = 32; -- ext_irq_count = 4; -- is_ext_irq_cascaded = 1; -- ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE; -- ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE; -- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358; -+ periph_bases[0] += PERF_IRQMASK_6358_REG(0); -+ periph_bases[1] += PERF_IRQMASK_6358_REG(1); -+ periph_irq_count = 2; -+ periph_width = 1; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358; -+ ext_irq_count = 4; -+ ext_irqs[0] = BCM_6358_EXT_IRQ0; -+ ext_irqs[1] = BCM_6358_EXT_IRQ1; -+ ext_irqs[2] = BCM_6358_EXT_IRQ2; -+ ext_irqs[3] = BCM_6358_EXT_IRQ3; -+ ext_shift = 4; - break; - case BCM6362_CPU_ID: -- irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0); -- irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0); -- irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1); -- irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1); -- irq_bits = 64; -- ext_irq_count = 4; -- is_ext_irq_cascaded = 1; -- ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE; -- ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE; -- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362; -+ periph_bases[0] += PERF_IRQMASK_6362_REG(0); -+ periph_bases[1] += PERF_IRQMASK_6362_REG(1); -+ periph_irq_count = 2; -+ periph_width = 2; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362; -+ ext_irq_count = 4; -+ ext_irqs[0] = BCM_6362_EXT_IRQ0; -+ ext_irqs[1] = BCM_6362_EXT_IRQ1; -+ ext_irqs[2] = BCM_6362_EXT_IRQ2; -+ ext_irqs[3] = BCM_6362_EXT_IRQ3; -+ ext_shift = 4; - break; - case BCM6368_CPU_ID: -- irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0); -- irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0); -- irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1); -- irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1); -- irq_bits = 64; -+ periph_bases[0] += PERF_IRQMASK_6368_REG(0); -+ periph_bases[1] += PERF_IRQMASK_6368_REG(1); -+ periph_irq_count = 2; -+ periph_width = 2; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368; -+ ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368; - ext_irq_count = 6; -- is_ext_irq_cascaded = 1; -- ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE; -- ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE; -- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368; -- ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368; -+ ext_irqs[0] = BCM_6368_EXT_IRQ0; -+ ext_irqs[1] = BCM_6368_EXT_IRQ1; -+ ext_irqs[2] = BCM_6368_EXT_IRQ2; -+ ext_irqs[3] = BCM_6368_EXT_IRQ3; -+ ext_irqs[4] = BCM_6368_EXT_IRQ4; -+ ext_irqs[5] = BCM_6368_EXT_IRQ5; -+ ext_shift = 4; - break; - default: - BUG(); - } - -- if (irq_bits == 32) { -- dispatch_internal = __dispatch_internal_32; -- internal_irq_mask = __internal_irq_mask_32; -- internal_irq_unmask = __internal_irq_unmask_32; -- } else { -- dispatch_internal = __dispatch_internal_64; -- internal_irq_mask = __internal_irq_mask_64; -- internal_irq_unmask = __internal_irq_unmask_64; -- } --} -- --void __init arch_init_irq(void) --{ -- int i; -- -- bcm63xx_init_irq(); - mips_cpu_irq_init(); -- for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i) -- irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip, -- handle_level_irq); -- -- for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i) -- irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip, -- handle_edge_irq); -- -- if (!is_ext_irq_cascaded) { -- for (i = 3; i < 3 + ext_irq_count; ++i) -- setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action); -- } -- -- setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action); --#ifdef CONFIG_SMP -- if (is_ext_irq_cascaded) { -- setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action); -- bcm63xx_internal_irq_chip.irq_set_affinity = -- bcm63xx_internal_set_affinity; -- -- cpumask_clear(irq_default_affinity); -- cpumask_set_cpu(smp_processor_id(), irq_default_affinity); -- } --#endif -+ bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases, -+ periph_width); -+ bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift); -+ if (ext_irq_count > 4) -+ bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1], -+ ext_shift); - } diff --git a/target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch deleted file mode 100644 index e911f0ead5..0000000000 --- a/target/linux/bcm63xx/patches-4.14/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 4fd286c3e5a5bebab0391cf1937695b3ed6721a3 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 30 Nov 2014 20:20:30 +0100 -Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4 - and 5 - -Due to the external interrupts being non consecutive, the previous -implementation did not support them. Now that we treat both registers -as separate irq controllers, there is no such limitation anymore and -we can expose them for drivers to use. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/irq.c | 5 ++++- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 2 ++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 1 + - 3 files changed, 7 insertions(+), 1 deletion(-) - ---- a/arch/mips/bcm63xx/irq.c -+++ b/arch/mips/bcm63xx/irq.c -@@ -108,11 +108,14 @@ void __init arch_init_irq(void) - periph_width = 1; - - ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358; -- ext_irq_count = 4; -+ ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358; -+ ext_irq_count = 6; - ext_irqs[0] = BCM_6358_EXT_IRQ0; - ext_irqs[1] = BCM_6358_EXT_IRQ1; - ext_irqs[2] = BCM_6358_EXT_IRQ2; - ext_irqs[3] = BCM_6358_EXT_IRQ3; -+ ext_irqs[4] = BCM_6358_EXT_IRQ4; -+ ext_irqs[5] = BCM_6358_EXT_IRQ5; - ext_shift = 4; - break; - case BCM6362_CPU_ID: ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -896,6 +896,8 @@ enum bcm63xx_irq { - #define BCM_6358_EXT_IRQ1 (IRQ_INTERNAL_BASE + 26) - #define BCM_6358_EXT_IRQ2 (IRQ_INTERNAL_BASE + 27) - #define BCM_6358_EXT_IRQ3 (IRQ_INTERNAL_BASE + 28) -+#define BCM_6358_EXT_IRQ4 (IRQ_INTERNAL_BASE + 20) -+#define BCM_6358_EXT_IRQ5 (IRQ_INTERNAL_BASE + 21) - - /* - * 6362 irqs ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -244,6 +244,7 @@ - #define PERF_EXTIRQ_CFG_REG_6362 0x18 - #define PERF_EXTIRQ_CFG_REG_6368 0x18 - -+#define PERF_EXTIRQ_CFG_REG2_6358 0x1c - #define PERF_EXTIRQ_CFG_REG2_6368 0x1c - - /* for 6348 only */ diff --git a/target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch deleted file mode 100644 index 07d3f9dbc8..0000000000 --- a/target/linux/bcm63xx/patches-4.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch +++ /dev/null @@ -1,77 +0,0 @@ -From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 7 Dec 2013 14:08:36 +0100 -Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper - ---- - arch/mips/bcm63xx/cpu.c | 10 ++++++++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++ - 2 files changed, 28 insertions(+) - ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs); - u16 bcm63xx_cpu_id __read_mostly; - EXPORT_SYMBOL(bcm63xx_cpu_id); - -+static u32 bcm63xx_cpu_variant __read_mostly; -+ - static u8 bcm63xx_cpu_rev; - static unsigned int bcm63xx_cpu_freq; - static unsigned int bcm63xx_memory_size; -@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = { - - }; - -+u32 bcm63xx_get_cpu_variant(void) -+{ -+ return bcm63xx_cpu_variant; -+} -+ -+EXPORT_SYMBOL(bcm63xx_get_cpu_variant); -+ - u8 bcm63xx_get_cpu_rev(void) - { - return bcm63xx_cpu_rev; -@@ -333,6 +342,7 @@ void __init bcm63xx_cpu_init(void) - /* read out CPU type */ - tmp = bcm_readl(chipid_reg); - bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; -+ bcm63xx_cpu_variant = bcm63xx_cpu_id; - bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; - - switch (bcm63xx_cpu_id) { ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -20,6 +20,7 @@ - #define BCM6368_CPU_ID 0x6368 - - void __init bcm63xx_cpu_init(void); -+u32 bcm63xx_get_cpu_variant(void); - u8 bcm63xx_get_cpu_rev(void); - unsigned int bcm63xx_get_cpu_freq(void); - -@@ -83,6 +84,23 @@ static inline u16 __pure bcm63xx_get_cpu - #define BCMCPU_IS_6362() (bcm63xx_get_cpu_id() == BCM6362_CPU_ID) - #define BCMCPU_IS_6368() (bcm63xx_get_cpu_id() == BCM6368_CPU_ID) - -+#define BCMCPU_VARIANT_IS_3368() \ -+ (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID) -+#define BCMCPU_VARIANT_IS_6328() \ -+ (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID) -+#define BCMCPU_VARIANT_IS_6338() \ -+ (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID) -+#define BCMCPU_VARIANT_IS_6345() \ -+ (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID) -+#define BCMCPU_VARIANT_IS_6348() \ -+ (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID) -+#define BCMCPU_VARIANT_IS_6358() \ -+ (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID) -+#define BCMCPU_VARIANT_IS_6362() \ -+ (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID) -+#define BCMCPU_VARIANT_IS_6368() \ -+ (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID) -+ - /* - * While registers sets are (mostly) the same across 63xx CPU, base - * address of these sets do change. diff --git a/target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch deleted file mode 100644 index 57af836858..0000000000 --- a/target/linux/bcm63xx/patches-4.14/331-MIPS-BCM63XX-define-variant-id-field.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 7 Dec 2013 14:22:41 +0100 -Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field - -Some SoC have a variant id field in the chip id register. - -Signed-off-by: Jonas Gorski ---- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -10,6 +10,8 @@ - #define PERF_REV_REG 0x0 - #define REV_CHIPID_SHIFT 16 - #define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT) -+#define REV_VARID_SHIFT 12 -+#define REV_VARID_MASK (0xf << REV_VARID_SHIFT) - #define REV_REVID_SHIFT 0 - #define REV_REVID_MASK (0xff << REV_REVID_SHIFT) - diff --git a/target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch deleted file mode 100644 index a05a4b3e24..0000000000 --- a/target/linux/bcm63xx/patches-4.14/332-MIPS-BCM63XX-detect-BCM6328-variants.patch +++ /dev/null @@ -1,68 +0,0 @@ -From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 7 Dec 2013 14:30:59 +0100 -Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/cpu.c | 10 ++++++++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++++-- - 2 files changed, 16 insertions(+), 2 deletions(-) - ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -305,6 +305,7 @@ void __init bcm63xx_cpu_init(void) - unsigned int tmp; - unsigned int cpu = smp_processor_id(); - u32 chipid_reg; -+ u8 __maybe_unused varid = 0; - - /* soc registers location depends on cpu type */ - chipid_reg = 0; -@@ -344,6 +345,7 @@ void __init bcm63xx_cpu_init(void) - bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; - bcm63xx_cpu_variant = bcm63xx_cpu_id; - bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; -+ varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT; - - switch (bcm63xx_cpu_id) { - case BCM3368_CPU_ID: -@@ -353,6 +355,14 @@ void __init bcm63xx_cpu_init(void) - case BCM6328_CPU_ID: - bcm63xx_regs_base = bcm6328_regs_base; - bcm63xx_irqs = bcm6328_irqs; -+ -+ if (varid == 1) -+ bcm63xx_cpu_variant = BCM63281_CPU_ID; -+ else if (varid == 3) -+ bcm63xx_cpu_variant = BCM63283_CPU_ID; -+ else -+ pr_warn("unknown BCM6328 variant: %x\n", varid); -+ - break; - case BCM6338_CPU_ID: - bcm63xx_regs_base = bcm6338_regs_base; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -12,6 +12,8 @@ - */ - #define BCM3368_CPU_ID 0x3368 - #define BCM6328_CPU_ID 0x6328 -+#define BCM63281_CPU_ID 0x63281 -+#define BCM63283_CPU_ID 0x63283 - #define BCM6338_CPU_ID 0x6338 - #define BCM6345_CPU_ID 0x6345 - #define BCM6348_CPU_ID 0x6348 -@@ -86,8 +88,10 @@ static inline u16 __pure bcm63xx_get_cpu - - #define BCMCPU_VARIANT_IS_3368() \ - (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID) --#define BCMCPU_VARIANT_IS_6328() \ -- (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID) -+#define BCMCPU_VARIANT_IS_63281() \ -+ (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID) -+#define BCMCPU_VARIANT_IS_63283() \ -+ (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID) - #define BCMCPU_VARIANT_IS_6338() \ - (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID) - #define BCMCPU_VARIANT_IS_6345() \ diff --git a/target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch deleted file mode 100644 index 2efbf36d32..0000000000 --- a/target/linux/bcm63xx/patches-4.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 7 Dec 2013 14:33:28 +0100 -Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants - ---- - arch/mips/bcm63xx/cpu.c | 8 ++++++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++ - 2 files changed, 11 insertions(+) - ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -383,6 +383,14 @@ void __init bcm63xx_cpu_init(void) - case BCM6362_CPU_ID: - bcm63xx_regs_base = bcm6362_regs_base; - bcm63xx_irqs = bcm6362_irqs; -+ -+ if (varid == 1) -+ bcm63xx_cpu_variant = BCM6362_CPU_ID; -+ else if (varid == 2) -+ bcm63xx_cpu_variant = BCM6361_CPU_ID; -+ else -+ pr_warn("unknown BCM6362 variant: %x\n", varid); -+ - break; - case BCM6368_CPU_ID: - bcm63xx_regs_base = bcm6368_regs_base; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -18,6 +18,7 @@ - #define BCM6345_CPU_ID 0x6345 - #define BCM6348_CPU_ID 0x6348 - #define BCM6358_CPU_ID 0x6358 -+#define BCM6361_CPU_ID 0x6361 - #define BCM6362_CPU_ID 0x6362 - #define BCM6368_CPU_ID 0x6368 - -@@ -100,6 +101,8 @@ static inline u16 __pure bcm63xx_get_cpu - (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID) - #define BCMCPU_VARIANT_IS_6358() \ - (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID) -+#define BCMCPU_VARIANT_IS_6361() \ -+ (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID) - #define BCMCPU_VARIANT_IS_6362() \ - (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID) - #define BCMCPU_VARIANT_IS_6368() \ diff --git a/target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch deleted file mode 100644 index 64bcd8f19b..0000000000 --- a/target/linux/bcm63xx/patches-4.14/334-MIPS-BCM63XX-detect-BCM6368-variants.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 7 Dec 2013 14:36:56 +0100 -Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants - -The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart -from missing DSL, there is no difference to BCM6368, so treat it such. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/cpu.c | 4 ++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++ - 2 files changed, 7 insertions(+) - ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -393,8 +393,12 @@ void __init bcm63xx_cpu_init(void) - - break; - case BCM6368_CPU_ID: -+ case BCM6369_CPU_ID: - bcm63xx_regs_base = bcm6368_regs_base; - bcm63xx_irqs = bcm6368_irqs; -+ -+ /* BCM6369 is a BCM6368 without xDSL, so treat it the same */ -+ bcm63xx_cpu_id = BCM6368_CPU_ID; - break; - default: - panic("unsupported broadcom CPU %x", bcm63xx_cpu_id); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -21,6 +21,7 @@ - #define BCM6361_CPU_ID 0x6361 - #define BCM6362_CPU_ID 0x6362 - #define BCM6368_CPU_ID 0x6368 -+#define BCM6369_CPU_ID 0x6369 - - void __init bcm63xx_cpu_init(void); - u32 bcm63xx_get_cpu_variant(void); -@@ -107,6 +108,8 @@ static inline u16 __pure bcm63xx_get_cpu - (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID) - #define BCMCPU_VARIANT_IS_6368() \ - (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID) -+#define BCMCPU_VARIANT_IS_6369() \ -+ (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID) - - /* - * While registers sets are (mostly) the same across 63xx CPU, base diff --git a/target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch deleted file mode 100644 index 54900d72ab..0000000000 --- a/target/linux/bcm63xx/patches-4.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch +++ /dev/null @@ -1,20 +0,0 @@ -From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 8 Dec 2013 03:05:54 +0100 -Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size - ---- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h -@@ -42,7 +42,7 @@ - BCM_CB_MEM_SIZE - 1) - - #define BCM_PCIE_MEM_BASE_PA 0x10f00000 --#define BCM_PCIE_MEM_SIZE (16 * 1024 * 1024) -+#define BCM_PCIE_MEM_SIZE (1 * 1024 * 1024) - #define BCM_PCIE_MEM_END_PA (BCM_PCIE_MEM_BASE_PA + \ - BCM_PCIE_MEM_SIZE - 1) - diff --git a/target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch deleted file mode 100644 index 05142a8e46..0000000000 --- a/target/linux/bcm63xx/patches-4.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch +++ /dev/null @@ -1,70 +0,0 @@ -From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 8 Dec 2013 03:13:06 +0100 -Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows - -Different SoCs use different memory windows (and sizes), so don't -hardcode it. ---- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 8 ++++---- - arch/mips/pci/pci-bcm63xx.c | 15 ++++++++++----- - 2 files changed, 14 insertions(+), 9 deletions(-) - ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h -@@ -41,10 +41,10 @@ - #define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \ - BCM_CB_MEM_SIZE - 1) - --#define BCM_PCIE_MEM_BASE_PA 0x10f00000 --#define BCM_PCIE_MEM_SIZE (1 * 1024 * 1024) --#define BCM_PCIE_MEM_END_PA (BCM_PCIE_MEM_BASE_PA + \ -- BCM_PCIE_MEM_SIZE - 1) -+#define BCM_PCIE_MEM_BASE_PA_6328 0x10f00000 -+#define BCM_PCIE_MEM_SIZE_6328 (1 * 1024 * 1024) -+#define BCM_PCIE_MEM_END_PA_6328 (BCM_PCIE_MEM_BASE_PA_6328 + \ -+ BCM_PCIE_MEM_SIZE_6328 - 1) - - /* - * Internal registers are accessed through KSEG3 ---- a/arch/mips/pci/pci-bcm63xx.c -+++ b/arch/mips/pci/pci-bcm63xx.c -@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control - - static struct resource bcm_pcie_mem_resource = { - .name = "bcm63xx PCIe memory space", -- .start = BCM_PCIE_MEM_BASE_PA, -- .end = BCM_PCIE_MEM_END_PA, -+ .start = 0, -+ .end = 0, - .flags = IORESOURCE_MEM, - }; - -@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie( - bcm_pcie_writel(val, PCIE_CONFIG2_REG); - - /* set bar0 to little endian */ -- val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT; -- val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT; -+ val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT; -+ val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT; - val |= BASEMASK_REMAP_EN; - bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG); - -- val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT; -+ val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT; - bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG); - - register_pci_controller(&bcm63xx_pcie_controller); -@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void) - if (!bcm63xx_pci_enabled) - return -ENODEV; - -+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) { -+ bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328; -+ bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328; -+ } -+ - switch (bcm63xx_get_cpu_id()) { - case BCM6328_CPU_ID: - case BCM6362_CPU_ID: diff --git a/target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch deleted file mode 100644 index c38b431125..0000000000 --- a/target/linux/bcm63xx/patches-4.14/337-MIPS-BCM63XX-widen-cpuid-field.patch +++ /dev/null @@ -1,56 +0,0 @@ -From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 7 Dec 2013 14:54:51 +0100 -Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field - ---- - arch/mips/bcm63xx/cpu.c | 2 +- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++---- - 2 files changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base); - const int *bcm63xx_irqs; - EXPORT_SYMBOL(bcm63xx_irqs); - --u16 bcm63xx_cpu_id __read_mostly; -+u32 bcm63xx_cpu_id __read_mostly; - EXPORT_SYMBOL(bcm63xx_cpu_id); - - static u32 bcm63xx_cpu_variant __read_mostly; -@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi - - static unsigned int detect_cpu_clock(void) - { -- u16 cpu_id = bcm63xx_get_cpu_id(); -+ u32 cpu_id = bcm63xx_get_cpu_id(); - - switch (cpu_id) { - case BCM3368_CPU_ID: ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -28,7 +28,7 @@ u32 bcm63xx_get_cpu_variant(void); - u8 bcm63xx_get_cpu_rev(void); - unsigned int bcm63xx_get_cpu_freq(void); - --static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id) -+static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id) - { - switch (cpu_id) { - #ifdef CONFIG_BCM63XX_CPU_3368 -@@ -70,11 +70,11 @@ static inline u16 __pure __bcm63xx_get_c - return cpu_id; - } - --extern u16 bcm63xx_cpu_id; -+extern u32 bcm63xx_cpu_id; - --static inline u16 __pure bcm63xx_get_cpu_id(void) -+static inline u32 __pure bcm63xx_get_cpu_id(void) - { -- const u16 cpu_id = bcm63xx_cpu_id; -+ const u32 cpu_id = bcm63xx_cpu_id; - - return __bcm63xx_get_cpu_id(cpu_id); - } diff --git a/target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch deleted file mode 100644 index 1809a3cac4..0000000000 --- a/target/linux/bcm63xx/patches-4.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 15 Dec 2013 20:46:26 +0100 -Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs - -Newer SoCs have 128 bit wide irq registers, thus 128 available internal -interupts. ---- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++- - arch/mips/include/asm/mach-bcm63xx/irq.h | 2 +- - 2 files changed, 4 insertions(+), 2 deletions(-) - ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h -@@ -2,10 +2,12 @@ - #ifndef BCM63XX_IRQ_H_ - #define BCM63XX_IRQ_H_ - -+#include - #include - - #define IRQ_INTERNAL_BASE 8 --#define IRQ_EXTERNAL_BASE 100 -+#define NR_INTERNAL_IRQS 128 -+#define IRQ_EXTERNAL_BASE (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS) - #define IRQ_EXT_0 (IRQ_EXTERNAL_BASE + 0) - #define IRQ_EXT_1 (IRQ_EXTERNAL_BASE + 1) - #define IRQ_EXT_2 (IRQ_EXTERNAL_BASE + 2) ---- a/arch/mips/include/asm/mach-bcm63xx/irq.h -+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h -@@ -2,7 +2,7 @@ - #ifndef __ASM_MACH_BCM63XX_IRQ_H - #define __ASM_MACH_BCM63XX_IRQ_H - --#define NR_IRQS 128 -+#define NR_IRQS 256 - #define MIPS_CPU_IRQ_BASE 0 - - #endif diff --git a/target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch deleted file mode 100644 index 65ca97628c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch +++ /dev/null @@ -1,737 +0,0 @@ -From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 7 Dec 2013 17:14:17 +0100 -Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268 - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/Kconfig | 5 + - arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +- - arch/mips/bcm63xx/clk.c | 25 ++++- - arch/mips/bcm63xx/cpu.c | 59 +++++++++- - arch/mips/bcm63xx/dev-flash.c | 6 + - arch/mips/bcm63xx/dev-spi.c | 4 +- - arch/mips/bcm63xx/irq.c | 20 +++- - arch/mips/bcm63xx/reset.c | 21 ++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 130 ++++++++++++++++++++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 2 + - arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 79 +++++++++++++ - arch/mips/include/asm/mach-bcm63xx/ioremap.h | 1 + - 12 files changed, 342 insertions(+), 12 deletions(-) - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -61,6 +61,11 @@ config BCM63XX_CPU_6368 - select HW_HAS_PCI - select BCM63XX_OHCI - select BCM63XX_EHCI -+ -+config BCM63XX_CPU_63268 -+ bool "support 63268 CPU" -+ select SYS_HAS_CPU_BMIPS4350 -+ select HW_HAS_PCI - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -697,7 +697,7 @@ void __init board_prom_init(void) - /* read base address of boot chip select (0) - * 6328/6362 do not have MPI but boot from a fixed address - */ -- if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) { -+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) { - val = 0x18000000; - } else { - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -169,6 +169,8 @@ static void enetsw_set(struct clk *clk, - clk_disable_unlocked(&clk_swpkt_sar); - } - bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable); -+ } else if (BCMCPU_IS_63268()) { -+ bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable); - } else { - return; - } -@@ -214,6 +216,8 @@ static void usbh_set(struct clk *clk, in - bcm_hwclock_set(CKCTL_6362_USBH_EN, enable); - else if (BCMCPU_IS_6368()) - bcm_hwclock_set(CKCTL_6368_USBH_EN, enable); -+ else if (BCMCPU_IS_63268()) -+ bcm_hwclock_set(CKCTL_63268_USBH_EN, enable); - else - return; - -@@ -236,6 +240,8 @@ static void usbd_set(struct clk *clk, in - bcm_hwclock_set(CKCTL_6362_USBD_EN, enable); - else if (BCMCPU_IS_6368()) - bcm_hwclock_set(CKCTL_6368_USBD_EN, enable); -+ else if (BCMCPU_IS_63268()) -+ bcm_hwclock_set(CKCTL_63268_USBD_EN, enable); - else - return; - -@@ -262,9 +268,13 @@ static void spi_set(struct clk *clk, int - mask = CKCTL_6358_SPI_EN; - else if (BCMCPU_IS_6362()) - mask = CKCTL_6362_SPI_EN; -- else -- /* BCMCPU_IS_6368 */ -+ else if (BCMCPU_IS_6368()) - mask = CKCTL_6368_SPI_EN; -+ else if (BCMCPU_IS_63268()) -+ mask = CKCTL_63268_SPI_EN; -+ else -+ return; -+ - bcm_hwclock_set(mask, enable); - } - -@@ -283,6 +293,8 @@ static void hsspi_set(struct clk *clk, i - mask = CKCTL_6328_HSSPI_EN; - else if (BCMCPU_IS_6362()) - mask = CKCTL_6362_HSSPI_EN; -+ else if (BCMCPU_IS_63268()) -+ mask = CKCTL_63268_HSSPI_EN; - else - return; - -@@ -352,6 +364,8 @@ static void pcie_set(struct clk *clk, in - bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable); - else if (BCMCPU_IS_6362()) - bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable); -+ else if (BCMCPU_IS_63268()) -+ bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable); - } - - static struct clk clk_pcie = { -@@ -536,6 +550,21 @@ static struct clk_lookup bcm6368_clks[] - CLKDEV_INIT(NULL, "ipsec", &clk_ipsec), - }; - -+static struct clk_lookup bcm63268_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbd), -+ CLKDEV_INIT(NULL, "spi", &clk_spi), -+ CLKDEV_INIT(NULL, "hsspi", &clk_hsspi), -+ CLKDEV_INIT(NULL, "pcie", &clk_pcie), -+}; -+ - #define HSSPI_PLL_HZ_6328 133333333 - #define HSSPI_PLL_HZ_6362 400000000 - -@@ -568,6 +597,10 @@ static int __init bcm63xx_clk_init(void) - case BCM6368_CPU_ID: - clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks)); - break; -+ case BCM63268_CPU_ID: -+ clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362; -+ clkdev_add_table(bcm63268_clks, ARRAY_SIZE(bcm63268_clks)); -+ break; - } - - return 0; ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = { - - }; - -+static const unsigned long bcm63268_regs_base[] = { -+ __GEN_CPU_REGS_TABLE(63268) -+}; -+ -+static const int bcm63268_irqs[] = { -+ __GEN_CPU_IRQ_TABLE(63268) -+ -+}; -+ - u32 bcm63xx_get_cpu_variant(void) - { - return bcm63xx_cpu_variant; -@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi - - return (((64 * 1000000) / p1) * p2 * ndiv) / m1; - } -+ case BCM63268_CPU_ID: -+ { -+ unsigned int tmp, mips_pll_fcvo; -+ -+ tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG); -+ mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >> -+ STRAPBUS_63268_FCVO_SHIFT; -+ switch (mips_pll_fcvo) { -+ case 0x3: -+ case 0xe: -+ return 320000000; -+ case 0xa: -+ return 333000000; -+ case 0x2: -+ case 0xb: -+ case 0xf: -+ return 400000000; -+ default: -+ return 0; -+ } -+ } - - default: - panic("Failed to detect clock for CPU with id=%04X\n", cpu_id); -@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v - unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; - u32 val; - -- if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) -+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) - return bcm_ddr_readl(DDR_CSEND_REG) << 24; - - if (BCMCPU_IS_6345()) { -@@ -305,6 +335,7 @@ void __init bcm63xx_cpu_init(void) - unsigned int tmp; - unsigned int cpu = smp_processor_id(); - u32 chipid_reg; -+ bool long_chipid = false; - u8 __maybe_unused varid = 0; - - /* soc registers location depends on cpu type */ -@@ -326,6 +357,9 @@ void __init bcm63xx_cpu_init(void) - case 0x10: - chipid_reg = BCM_6345_PERF_BASE; - break; -+ case 0x80: -+ long_chipid = true; -+ /* fall-through */ - default: - chipid_reg = BCM_6368_PERF_BASE; - break; -@@ -333,6 +367,7 @@ void __init bcm63xx_cpu_init(void) - break; - } - -+ - /* - * really early to panic, but delaying panic would not help since we - * will never get any working console -@@ -342,10 +377,17 @@ void __init bcm63xx_cpu_init(void) - - /* read out CPU type */ - tmp = bcm_readl(chipid_reg); -- bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; -- bcm63xx_cpu_variant = bcm63xx_cpu_id; -+ -+ if (long_chipid) { -+ bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK; -+ bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT; -+ } else { -+ bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; -+ varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT; -+ } -+ - bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; -- varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT; -+ bcm63xx_cpu_variant = bcm63xx_cpu_id; - - switch (bcm63xx_cpu_id) { - case BCM3368_CPU_ID: -@@ -400,6 +442,15 @@ void __init bcm63xx_cpu_init(void) - /* BCM6369 is a BCM6368 without xDSL, so treat it the same */ - bcm63xx_cpu_id = BCM6368_CPU_ID; - break; -+ case BCM63168_CPU_ID: -+ case BCM63169_CPU_ID: -+ case BCM63268_CPU_ID: -+ case BCM63269_CPU_ID: -+ bcm63xx_regs_base = bcm63268_regs_base; -+ bcm63xx_irqs = bcm63268_irqs; -+ -+ bcm63xx_cpu_id = BCM63268_CPU_ID; -+ break; - default: - panic("unsupported broadcom CPU %x", bcm63xx_cpu_id); - break; ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t - case STRAPBUS_6368_BOOT_SEL_PARALLEL: - return BCM63XX_FLASH_TYPE_PARALLEL; - } -+ case BCM63268_CPU_ID: -+ val = bcm_misc_readl(MISC_STRAPBUS_63268_REG); -+ if (val & STRAPBUS_63268_BOOT_SEL_SERIAL) -+ return BCM63XX_FLASH_TYPE_SERIAL; -+ else -+ return BCM63XX_FLASH_TYPE_NAND; - default: - return -EINVAL; - } ---- a/arch/mips/bcm63xx/dev-spi.c -+++ b/arch/mips/bcm63xx/dev-spi.c -@@ -51,7 +51,7 @@ int __init bcm63xx_spi_register(void) - } - - if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() || -- BCMCPU_IS_6368()) { -+ BCMCPU_IS_6368() || BCMCPU_IS_63268()) { - bcm63xx_spi_device.name = "bcm6358-spi", - spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; - } ---- a/arch/mips/bcm63xx/irq.c -+++ b/arch/mips/bcm63xx/irq.c -@@ -149,6 +149,20 @@ void __init arch_init_irq(void) - ext_irqs[5] = BCM_6368_EXT_IRQ5; - ext_shift = 4; - break; -+ case BCM63268_CPU_ID: -+ periph_bases[0] += PERF_IRQMASK_63268_REG(0); -+ periph_bases[1] += PERF_IRQMASK_63268_REG(1); -+ periph_irq_count = 2; -+ periph_width = 4; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268; -+ ext_irq_count = 4; -+ ext_irqs[0] = BCM_63268_EXT_IRQ0; -+ ext_irqs[1] = BCM_63268_EXT_IRQ1; -+ ext_irqs[2] = BCM_63268_EXT_IRQ2; -+ ext_irqs[3] = BCM_63268_EXT_IRQ3; -+ ext_shift = 4; -+ break; - default: - BUG(); - } ---- a/arch/mips/bcm63xx/reset.c -+++ b/arch/mips/bcm63xx/reset.c -@@ -126,6 +126,20 @@ - #define BCM6368_RESET_PCIE 0 - #define BCM6368_RESET_PCIE_EXT 0 - -+#define BCM63268_RESET_SPI SOFTRESET_63268_SPI_MASK -+#define BCM63268_RESET_ENET 0 -+#define BCM63268_RESET_USBH SOFTRESET_63268_USBH_MASK -+#define BCM63268_RESET_USBD SOFTRESET_63268_USBS_MASK -+#define BCM63268_RESET_DSL 0 -+#define BCM63268_RESET_SAR SOFTRESET_63268_SAR_MASK -+#define BCM63268_RESET_EPHY 0 -+#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK -+#define BCM63268_RESET_PCM SOFTRESET_63268_PCM_MASK -+#define BCM63268_RESET_MPI 0 -+#define BCM63268_RESET_PCIE (SOFTRESET_63268_PCIE_MASK | \ -+ SOFTRESET_63268_PCIE_CORE_MASK) -+#define BCM63268_RESET_PCIE_EXT SOFTRESET_63268_PCIE_EXT_MASK -+ - /* - * core reset bits - */ -@@ -157,6 +171,10 @@ static const u32 bcm6368_reset_bits[] = - __GEN_RESET_BITS_TABLE(6368) - }; - -+static const u32 bcm63268_reset_bits[] = { -+ __GEN_RESET_BITS_TABLE(63268) -+}; -+ - const u32 *bcm63xx_reset_bits; - static int reset_reg; - -@@ -183,6 +201,9 @@ static int __init bcm63xx_reset_bits_ini - } else if (BCMCPU_IS_6368()) { - reset_reg = PERF_SOFTRESET_6368_REG; - bcm63xx_reset_bits = bcm6368_reset_bits; -+ } else if (BCMCPU_IS_63268()) { -+ reset_reg = PERF_SOFTRESET_63268_REG; -+ bcm63xx_reset_bits = bcm63268_reset_bits; - } - - return 0; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -22,6 +22,10 @@ - #define BCM6362_CPU_ID 0x6362 - #define BCM6368_CPU_ID 0x6368 - #define BCM6369_CPU_ID 0x6369 -+#define BCM63168_CPU_ID 0x63168 -+#define BCM63169_CPU_ID 0x63169 -+#define BCM63268_CPU_ID 0x63268 -+#define BCM63269_CPU_ID 0x63269 - - void __init bcm63xx_cpu_init(void); - u32 bcm63xx_get_cpu_variant(void); -@@ -62,6 +66,10 @@ static inline u32 __pure __bcm63xx_get_c - #ifdef CONFIG_BCM63XX_CPU_6368 - case BCM6368_CPU_ID: - #endif -+ -+#ifdef CONFIG_BCM63XX_CPU_63268 -+ case BCM63268_CPU_ID: -+#endif - break; - default: - unreachable(); -@@ -87,6 +95,7 @@ static inline u32 __pure bcm63xx_get_cpu - #define BCMCPU_IS_6358() (bcm63xx_get_cpu_id() == BCM6358_CPU_ID) - #define BCMCPU_IS_6362() (bcm63xx_get_cpu_id() == BCM6362_CPU_ID) - #define BCMCPU_IS_6368() (bcm63xx_get_cpu_id() == BCM6368_CPU_ID) -+#define BCMCPU_IS_63268() (bcm63xx_get_cpu_id() == BCM63268_CPU_ID) - - #define BCMCPU_VARIANT_IS_3368() \ - (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID) -@@ -110,6 +119,14 @@ static inline u32 __pure bcm63xx_get_cpu - (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID) - #define BCMCPU_VARIANT_IS_6369() \ - (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID) -+#define BCMCPU_VARIANT_IS_63168() \ -+ (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID) -+#define BCMCPU_VARIANT_IS_63169() \ -+ (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID) -+#define BCMCPU_VARIANT_IS_63268() \ -+ (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID) -+#define BCMCPU_VARIANT_IS_63269() \ -+ (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID) - - /* - * While registers sets are (mostly) the same across 63xx CPU, base -@@ -574,6 +591,52 @@ enum bcm63xx_regs_set { - #define BCM_6368_RNG_BASE (0xb0004180) - #define BCM_6368_MISC_BASE (0xdeadbeef) - -+/* -+ * 63268 register sets base address -+ */ -+#define BCM_63268_DSL_LMEM_BASE (0xdeadbeef) -+#define BCM_63268_PERF_BASE (0xb0000000) -+#define BCM_63268_TIMER_BASE (0xb0000080) -+#define BCM_63268_WDT_BASE (0xb000009c) -+#define BCM_63268_UART0_BASE (0xb0000180) -+#define BCM_63268_UART1_BASE (0xb00001a0) -+#define BCM_63268_GPIO_BASE (0xb00000c0) -+#define BCM_63268_SPI_BASE (0xb0000800) -+#define BCM_63268_HSSPI_BASE (0xb0001000) -+#define BCM_63268_UDC0_BASE (0xdeadbeef) -+#define BCM_63268_USBDMA_BASE (0xb000c800) -+#define BCM_63268_OHCI0_BASE (0xb0002600) -+#define BCM_63268_OHCI_PRIV_BASE (0xdeadbeef) -+#define BCM_63268_USBH_PRIV_BASE (0xb0002700) -+#define BCM_63268_USBD_BASE (0xb0002400) -+#define BCM_63268_MPI_BASE (0xdeadbeef) -+#define BCM_63268_PCMCIA_BASE (0xdeadbeef) -+#define BCM_63268_PCIE_BASE (0xb06e0000) -+#define BCM_63268_SDRAM_REGS_BASE (0xdeadbeef) -+#define BCM_63268_DSL_BASE (0xdeadbeef) -+#define BCM_63268_UBUS_BASE (0xdeadbeef) -+#define BCM_63268_ENET0_BASE (0xdeadbeef) -+#define BCM_63268_ENET1_BASE (0xdeadbeef) -+#define BCM_63268_ENETDMA_BASE (0xb000d800) -+#define BCM_63268_ENETDMAC_BASE (0xb000da00) -+#define BCM_63268_ENETDMAS_BASE (0xb000dc00) -+#define BCM_63268_ENETSW_BASE (0xb0700000) -+#define BCM_63268_EHCI0_BASE (0xb0002500) -+#define BCM_63268_SDRAM_BASE (0xdeadbeef) -+#define BCM_63268_MEMC_BASE (0xdeadbeef) -+#define BCM_63268_DDR_BASE (0xb0003000) -+#define BCM_63268_M2M_BASE (0xdeadbeef) -+#define BCM_63268_ATM_BASE (0xdeadbeef) -+#define BCM_63268_XTM_BASE (0xb0007000) -+#define BCM_63268_XTMDMA_BASE (0xb000b800) -+#define BCM_63268_XTMDMAC_BASE (0xdeadbeef) -+#define BCM_63268_XTMDMAS_BASE (0xdeadbeef) -+#define BCM_63268_PCM_BASE (0xb000b000) -+#define BCM_63268_PCMDMA_BASE (0xb000b800) -+#define BCM_63268_PCMDMAC_BASE (0xdeadbeef) -+#define BCM_63268_PCMDMAS_BASE (0xdeadbeef) -+#define BCM_63268_RNG_BASE (0xdeadbeef) -+#define BCM_63268_MISC_BASE (0xb0001800) - - extern const unsigned long *bcm63xx_regs_base; - -@@ -1042,6 +1105,73 @@ enum bcm63xx_irq { - #define BCM_6368_EXT_IRQ4 (IRQ_INTERNAL_BASE + 24) - #define BCM_6368_EXT_IRQ5 (IRQ_INTERNAL_BASE + 25) - -+/* -+ * 63268 irqs -+ */ -+#define BCM_63268_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32) -+#define BCM_63268_VERY_HIGH_IRQ_BASE (BCM_63268_HIGH_IRQ_BASE + 32) -+ -+#define BCM_63268_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -+#define BCM_63268_SPI_IRQ (BCM_63268_VERY_HIGH_IRQ_BASE + 16) -+#define BCM_63268_UART0_IRQ (IRQ_INTERNAL_BASE + 5) -+#define BCM_63268_UART1_IRQ (BCM_63268_HIGH_IRQ_BASE + 2) -+#define BCM_63268_DSL_IRQ (IRQ_INTERNAL_BASE + 23) -+#define BCM_63268_UDC0_IRQ 0 -+#define BCM_63268_ENET0_IRQ 0 -+#define BCM_63268_ENET1_IRQ 0 -+#define BCM_63268_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 13) -+#define BCM_63268_HSSPI_IRQ (IRQ_INTERNAL_BASE + 6) -+#define BCM_63268_OHCI0_IRQ (IRQ_INTERNAL_BASE + 9) -+#define BCM_63268_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10) -+#define BCM_63268_USBD_IRQ (IRQ_INTERNAL_BASE + 11) -+#define BCM_63268_USBD_RXDMA0_IRQ (IRQ_INTERNAL_BASE + 19) -+#define BCM_63268_USBD_TXDMA0_IRQ (BCM_63268_HIGH_IRQ_BASE + 4) -+#define BCM_63268_USBD_RXDMA1_IRQ (IRQ_INTERNAL_BASE + 20) -+#define BCM_63268_USBD_TXDMA1_IRQ (BCM_63268_HIGH_IRQ_BASE + 5) -+#define BCM_63268_USBD_RXDMA2_IRQ (IRQ_INTERNAL_BASE + 21) -+#define BCM_63268_USBD_TXDMA2_IRQ (BCM_63268_HIGH_IRQ_BASE + 6) -+#define BCM_63268_PCMCIA_IRQ 0 -+#define BCM_63268_ENET0_RXDMA_IRQ 0 -+#define BCM_63268_ENET0_TXDMA_IRQ 0 -+#define BCM_63268_ENET1_RXDMA_IRQ 0 -+#define BCM_63268_ENET1_TXDMA_IRQ 0 -+#define BCM_63268_PCI_IRQ (BCM_63268_HIGH_IRQ_BASE + 8) -+#define BCM_63268_ATM_IRQ 0 -+#define BCM_63268_ENETSW_RXDMA0_IRQ (IRQ_INTERNAL_BASE + 1) -+#define BCM_63268_ENETSW_RXDMA1_IRQ (IRQ_INTERNAL_BASE + 2) -+#define BCM_63268_ENETSW_RXDMA2_IRQ (IRQ_INTERNAL_BASE + 3) -+#define BCM_63268_ENETSW_RXDMA3_IRQ (IRQ_INTERNAL_BASE + 4) -+#define BCM_63268_ENETSW_TXDMA0_IRQ (BCM_63268_VERY_HIGH_IRQ_BASE + 0) -+#define BCM_63268_ENETSW_TXDMA1_IRQ (BCM_63268_VERY_HIGH_IRQ_BASE + 1) -+#define BCM_63268_ENETSW_TXDMA2_IRQ (BCM_63268_VERY_HIGH_IRQ_BASE + 2) -+#define BCM_63268_ENETSW_TXDMA3_IRQ (BCM_63268_VERY_HIGH_IRQ_BASE + 3) -+#define BCM_63268_XTM_IRQ (BCM_63268_HIGH_IRQ_BASE + 17) -+#define BCM_63268_XTM_DMA0_IRQ (IRQ_INTERNAL_BASE + 26) -+ -+#define BCM_63268_RING_OSC_IRQ (BCM_63268_HIGH_IRQ_BASE + 20) -+#define BCM_63268_WLAN_GPIO_IRQ (BCM_63268_HIGH_IRQ_BASE + 3) -+#define BCM_63268_WLAN_IRQ (IRQ_INTERNAL_BASE + 7) -+#define BCM_63268_IPSEC_IRQ (IRQ_INTERNAL_BASE + 8) -+#define BCM_63268_NAND_IRQ (BCM_63268_HIGH_IRQ_BASE + 18) -+#define BCM_63268_PCM_IRQ (IRQ_INTERNAL_BASE + 13) -+#define BCM_63268_DG_IRQ (IRQ_INTERNAL_BASE + 15) -+#define BCM_63268_EPHY_ENERGY0_IRQ (IRQ_INTERNAL_BASE + 16) -+#define BCM_63268_EPHY_ENERGY1_IRQ (IRQ_INTERNAL_BASE + 17) -+#define BCM_63268_EPHY_ENERGY2_IRQ (IRQ_INTERNAL_BASE + 18) -+#define BCM_63268_EPHY_ENERGY3_IRQ (IRQ_INTERNAL_BASE + 19) -+#define BCM_63268_IPSEC_DMA0_IRQ (IRQ_INTERNAL_BASE + 22) -+#define BCM_63268_IPSEC_DMA1_IRQ (BCM_63268_HIGH_IRQ_BASE + 7) -+#define BCM_63268_FAP0_IRQ (IRQ_INTERNAL_BASE + 24) -+#define BCM_63268_FAP1_IRQ (IRQ_INTERNAL_BASE + 25) -+#define BCM_63268_PCM_DMA0_IRQ (BCM_63268_HIGH_IRQ_BASE + 10) -+#define BCM_63268_PCM_DMA1_IRQ (BCM_63268_HIGH_IRQ_BASE + 11) -+#define BCM_63268_DECT0_IRQ (BCM_63268_HIGH_IRQ_BASE + 0) -+#define BCM_63268_DECT1_IRQ (BCM_63268_HIGH_IRQ_BASE + 1) -+#define BCM_63268_EXT_IRQ0 (BCM_63268_HIGH_IRQ_BASE + 12) -+#define BCM_63268_EXT_IRQ1 (BCM_63268_HIGH_IRQ_BASE + 13) -+#define BCM_63268_EXT_IRQ2 (BCM_63268_HIGH_IRQ_BASE + 14) -+#define BCM_63268_EXT_IRQ3 (BCM_63268_HIGH_IRQ_BASE + 15) -+ - extern const int *bcm63xx_irqs; - - #define __GEN_CPU_IRQ_TABLE(__cpu) \ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h -@@ -23,6 +23,8 @@ static inline unsigned long bcm63xx_gpio - return 48; - case BCM6368_CPU_ID: - return 38; -+ case BCM63268_CPU_ID: -+ return 52; - case BCM6348_CPU_ID: - default: - return 37; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -10,6 +10,8 @@ - #define PERF_REV_REG 0x0 - #define REV_CHIPID_SHIFT 16 - #define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT) -+#define REV_LONG_CHIPID_SHIFT 12 -+#define REV_LONG_CHIPID_MASK (0xfffff << REV_LONG_CHIPID_SHIFT) - #define REV_VARID_SHIFT 12 - #define REV_VARID_MASK (0xf << REV_VARID_SHIFT) - #define REV_REVID_SHIFT 0 -@@ -212,6 +214,52 @@ - CKCTL_6368_NAND_EN | \ - CKCTL_6368_IPSEC_EN) - -+#define CKCTL_63268_DISABLE_GLESS (1 << 0) -+#define CKCTL_63268_VDSL_QPROC_EN (1 << 1) -+#define CKCTL_63268_VDSL_AFE_EN (1 << 2) -+#define CKCTL_63268_VDSL_EN (1 << 3) -+#define CKCTL_63268_MIPS_EN (1 << 4) -+#define CKCTL_63268_WLAN_OCP_EN (1 << 5) -+#define CKCTL_63268_DECT_EN (1 << 6) -+#define CKCTL_63268_FAP0_EN (1 << 7) -+#define CKCTL_63268_FAP1_EN (1 << 8) -+#define CKCTL_63268_SAR_EN (1 << 9) -+#define CKCTL_63268_ROBOSW_EN (1 << 10) -+#define CKCTL_63268_PCM_EN (1 << 11) -+#define CKCTL_63268_USBD_EN (1 << 12) -+#define CKCTL_63268_USBH_EN (1 << 13) -+#define CKCTL_63268_IPSEC_EN (1 << 14) -+#define CKCTL_63268_SPI_EN (1 << 15) -+#define CKCTL_63268_HSSPI_EN (1 << 16) -+#define CKCTL_63268_PCIE_EN (1 << 17) -+#define CKCTL_63268_PHYMIPS_EN (1 << 18) -+#define CKCTL_63268_GMAC_EN (1 << 19) -+#define CKCTL_63268_NAND_EN (1 << 20) -+#define CKCTL_63268_TBUS_EN (1 << 27) -+#define CKCTL_63268_ROBOSW250_EN (1 << 31) -+ -+#define CKCTL_63268_ALL_SAFE_EN (CKCTL_63268_VDSL_QPROC_EN | \ -+ CKCTL_63268_VDSL_AFE_EN | \ -+ CKCTL_63268_VDSL_EN | \ -+ CKCTL_63268_WLAN_OCP_EN | \ -+ CKCTL_63268_DECT_EN | \ -+ CKCTL_63268_FAP0_EN | \ -+ CKCTL_63268_FAP1_EN | \ -+ CKCTL_63268_SAR_EN | \ -+ CKCTL_63268_ROBOSW_EN | \ -+ CKCTL_63268_PCM_EN | \ -+ CKCTL_63268_USBD_EN | \ -+ CKCTL_63268_USBH_EN | \ -+ CKCTL_63268_IPSEC_EN | \ -+ CKCTL_63268_SPI_EN | \ -+ CKCTL_63268_HSSPI_EN | \ -+ CKCTL_63268_PCIE_EN | \ -+ CKCTL_63268_PHYMIPS_EN | \ -+ CKCTL_63268_GMAC_EN | \ -+ CKCTL_63268_NAND_EN | \ -+ CKCTL_63268_TBUS_EN | \ -+ CKCTL_63268_ROBOSW250_EN) -+ - /* System PLL Control register */ - #define PERF_SYS_PLL_CTL_REG 0x8 - #define SYS_PLL_SOFT_RESET 0x1 -@@ -225,6 +273,7 @@ - #define PERF_IRQMASK_6358_REG(x) (0xc + (x) * 0x2c) - #define PERF_IRQMASK_6362_REG(x) (0x20 + (x) * 0x10) - #define PERF_IRQMASK_6368_REG(x) (0x20 + (x) * 0x10) -+#define PERF_IRQMASK_63268_REG(x) (0x20 + (x) * 0x20) - - /* Interrupt Status register */ - #define PERF_IRQSTAT_3368_REG 0x10 -@@ -235,6 +284,7 @@ - #define PERF_IRQSTAT_6358_REG(x) (0x10 + (x) * 0x2c) - #define PERF_IRQSTAT_6362_REG(x) (0x28 + (x) * 0x10) - #define PERF_IRQSTAT_6368_REG(x) (0x28 + (x) * 0x10) -+#define PERF_IRQSTAT_63268_REG(x) (0x30 + (x) * 0x20) - - /* External Interrupt Configuration register */ - #define PERF_EXTIRQ_CFG_REG_3368 0x14 -@@ -245,6 +295,7 @@ - #define PERF_EXTIRQ_CFG_REG_6358 0x14 - #define PERF_EXTIRQ_CFG_REG_6362 0x18 - #define PERF_EXTIRQ_CFG_REG_6368 0x18 -+#define PERF_EXTIRQ_CFG_REG_63268 0x18 - - #define PERF_EXTIRQ_CFG_REG2_6358 0x1c - #define PERF_EXTIRQ_CFG_REG2_6368 0x1c -@@ -275,6 +326,7 @@ - #define PERF_SOFTRESET_6358_REG 0x34 - #define PERF_SOFTRESET_6362_REG 0x10 - #define PERF_SOFTRESET_6368_REG 0x10 -+#define PERF_SOFTRESET_63268_REG 0x10 - - #define SOFTRESET_3368_SPI_MASK (1 << 0) - #define SOFTRESET_3368_ENET_MASK (1 << 2) -@@ -368,6 +420,26 @@ - #define SOFTRESET_6368_USBH_MASK (1 << 12) - #define SOFTRESET_6368_PCM_MASK (1 << 13) - -+#define SOFTRESET_63268_SPI_MASK (1 << 0) -+#define SOFTRESET_63268_IPSEC_MASK (1 << 1) -+#define SOFTRESET_63268_EPHY_MASK (1 << 2) -+#define SOFTRESET_63268_SAR_MASK (1 << 3) -+#define SOFTRESET_63268_ENETSW_MASK (1 << 4) -+#define SOFTRESET_63268_USBS_MASK (1 << 5) -+#define SOFTRESET_63268_USBH_MASK (1 << 6) -+#define SOFTRESET_63268_PCM_MASK (1 << 7) -+#define SOFTRESET_63268_PCIE_CORE_MASK (1 << 8) -+#define SOFTRESET_63268_PCIE_MASK (1 << 9) -+#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10) -+#define SOFTRESET_63268_WLAN_SHIM_MASK (1 << 11) -+#define SOFTRESET_63268_DDR_PHY_MASK (1 << 12) -+#define SOFTRESET_63268_FAP0_MASK (1 << 13) -+#define SOFTRESET_63268_WLAN_UBUS_MASK (1 << 14) -+#define SOFTRESET_63268_DECT_MASK (1 << 15) -+#define SOFTRESET_63268_FAP1_MASK (1 << 16) -+#define SOFTRESET_63268_PCIE_HARD_MASK (1 << 17) -+#define SOFTRESET_63268_GPHY_MASK (1 << 18) -+ - /* MIPS PLL control register */ - #define PERF_MIPSPLLCTL_REG 0x34 - #define MIPSPLLCTL_N1_SHIFT 20 -@@ -1367,6 +1439,13 @@ - #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15) - #define STRAPBUS_6362_BOOT_SEL_NAND (0 << 15) - -+#define MISC_STRAPBUS_63268_REG 0x14 -+#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9) -+#define STRAPBUS_63268_BOOT_SEL_SERIAL (1 << 11) -+#define STRAPBUS_63268_BOOT_SEL_NAND (0 << 11) -+#define STRAPBUS_63268_FCVO_SHIFT 21 -+#define STRAPBUS_63268_FCVO_MASK (0xf << STRAPBUS_63268_FCVO_SHIFT) -+ - #define MISC_STRAPBUS_6328_REG 0x240 - #define STRAPBUS_6328_FCVO_SHIFT 7 - #define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT) ---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h -+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h -@@ -26,6 +26,7 @@ static inline int is_bcm63xx_internal_re - case BCM6328_CPU_ID: - case BCM6362_CPU_ID: - case BCM6368_CPU_ID: -+ case BCM63268_CPU_ID: - if (offset >= 0xb0000000 && offset < 0xb1000000) - return 1; - break; ---- a/arch/mips/bcm63xx/dev-hsspi.c -+++ b/arch/mips/bcm63xx/dev-hsspi.c -@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs - - int __init bcm63xx_hsspi_register(void) - { -- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362()) -+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268()) - return -ENODEV; - - spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI); ---- a/arch/mips/bcm63xx/dev-enet.c -+++ b/arch/mips/bcm63xx/dev-enet.c -@@ -176,7 +176,8 @@ static int __init register_shared(void) - else - shared_res[0].end += (RSET_ENETDMA_SIZE) - 1; - -- if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) -+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() || -+ BCMCPU_IS_63268()) - chan_count = 32; - else if (BCMCPU_IS_6345()) - chan_count = 8; -@@ -284,7 +285,8 @@ bcm63xx_enetsw_register(const struct bcm - { - int ret; - -- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368()) -+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && -+ !BCMCPU_IS_63268()) - return -ENODEV; - - ret = register_shared(); -@@ -305,6 +307,8 @@ bcm63xx_enetsw_register(const struct bcm - enetsw_pd.num_ports = ENETSW_PORTS_6328; - else if (BCMCPU_IS_6362() || BCMCPU_IS_6368()) - enetsw_pd.num_ports = ENETSW_PORTS_6368; -+ else if (BCMCPU_IS_63268()) -+ enetsw_pd.num_ports = ENETSW_PORTS_63268; - - enetsw_pd.dma_has_sram = true; - enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h -@@ -67,6 +67,7 @@ struct bcm63xx_enet_platform_data { - #define ENETSW_MAX_PORT 8 - #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */ - #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */ -+#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */ - - #define ENETSW_RGMII_PORT0 4 - diff --git a/target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch deleted file mode 100644 index e9f9e2b01d..0000000000 --- a/target/linux/bcm63xx/patches-4.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 8 Dec 2013 03:22:40 +0100 -Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268 - ---- - arch/mips/bcm63xx/reset.c | 3 ++- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++ - arch/mips/pci/pci-bcm63xx.c | 4 ++++ - 3 files changed, 11 insertions(+), 1 deletion(-) - ---- a/arch/mips/bcm63xx/reset.c -+++ b/arch/mips/bcm63xx/reset.c -@@ -137,7 +137,8 @@ - #define BCM63268_RESET_PCM SOFTRESET_63268_PCM_MASK - #define BCM63268_RESET_MPI 0 - #define BCM63268_RESET_PCIE (SOFTRESET_63268_PCIE_MASK | \ -- SOFTRESET_63268_PCIE_CORE_MASK) -+ SOFTRESET_63268_PCIE_CORE_MASK | \ -+ SOFTRESET_63268_PCIE_HARD_MASK) - #define BCM63268_RESET_PCIE_EXT SOFTRESET_63268_PCIE_EXT_MASK - - /* ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h -@@ -46,6 +46,11 @@ - #define BCM_PCIE_MEM_END_PA_6328 (BCM_PCIE_MEM_BASE_PA_6328 + \ - BCM_PCIE_MEM_SIZE_6328 - 1) - -+#define BCM_PCIE_MEM_BASE_PA_63268 0x11000000 -+#define BCM_PCIE_MEM_SIZE_63268 (15 * 1024 * 1024) -+#define BCM_PCIE_MEM_END_PA_63268 (BCM_PCIE_MEM_BASE_PA_63268 + \ -+ BCM_PCIE_MEM_SIZE_63268 - 1) -+ - /* - * Internal registers are accessed through KSEG3 - */ ---- a/arch/mips/pci/pci-bcm63xx.c -+++ b/arch/mips/pci/pci-bcm63xx.c -@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void) - if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) { - bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328; - bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328; -+ } else if (BCMCPU_IS_63268()) { -+ bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268; -+ bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268; - } - - switch (bcm63xx_get_cpu_id()) { - case BCM6328_CPU_ID: - case BCM6362_CPU_ID: -+ case BCM63268_CPU_ID: - return bcm63xx_register_pcie(); - case BCM3368_CPU_ID: - case BCM6348_CPU_ID: diff --git a/target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch deleted file mode 100644 index 1b2cbfbf48..0000000000 --- a/target/linux/bcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch +++ /dev/null @@ -1,697 +0,0 @@ -From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 8 Dec 2013 01:24:09 +0100 -Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318 - ---- - arch/mips/bcm63xx/Kconfig | 5 + - arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +- - arch/mips/bcm63xx/clk.c | 8 +- - arch/mips/bcm63xx/cpu.c | 53 +++++++++++ - arch/mips/bcm63xx/dev-flash.c | 3 + - arch/mips/bcm63xx/dev-spi.c | 2 +- - arch/mips/bcm63xx/irq.c | 10 ++ - arch/mips/bcm63xx/prom.c | 2 +- - arch/mips/bcm63xx/reset.c | 24 +++++ - arch/mips/bcm63xx/setup.c | 5 +- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 107 ++++++++++++++++++++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 75 ++++++++++++++- - arch/mips/include/asm/mach-bcm63xx/ioremap.h | 1 + - 13 files changed, 291 insertions(+), 6 deletions(-) - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -19,6 +19,11 @@ config BCM63XX_EHCI - select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD - select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD - -+config BCM63XX_CPU_6318 -+ bool "support 6318 CPU" -+ select SYS_HAS_CPU_BMIPS32_3300 -+ select HW_HAS_PCI -+ - config BCM63XX_CPU_6328 - bool "support 6328 CPU" - select SYS_HAS_CPU_BMIPS4350 ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -697,7 +697,7 @@ void __init board_prom_init(void) - /* read base address of boot chip select (0) - * 6328/6362 do not have MPI but boot from a fixed address - */ -- if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) { -+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) { - val = 0x18000000; - } else { - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -289,7 +289,9 @@ static void hsspi_set(struct clk *clk, i - { - u32 mask; - -- if (BCMCPU_IS_6328()) -+ if (BCMCPU_IS_6318()) -+ mask = CKCTL_6318_HSSPI_EN; -+ else if (BCMCPU_IS_6328()) - mask = CKCTL_6328_HSSPI_EN; - else if (BCMCPU_IS_6362()) - mask = CKCTL_6362_HSSPI_EN; -@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[] - CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1), - }; - -+static struct clk_lookup bcm6318_clks[] = { -+ /* fixed rate clocks */ -+ CLKDEV_INIT(NULL, "periph", &clk_periph), -+ CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), -+ /* gated clocks */ -+ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), -+ CLKDEV_INIT(NULL, "usbh", &clk_usbh), -+ CLKDEV_INIT(NULL, "usbd", &clk_usbh), -+ CLKDEV_INIT(NULL, "hsspi", &clk_hsspi), -+ CLKDEV_INIT(NULL, "pcie", &clk_pcie), -+}; -+ - static struct clk_lookup bcm6328_clks[] = { - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), -@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[] - CLKDEV_INIT(NULL, "pcie", &clk_pcie), - }; - -+#define HSSPI_PLL_HZ_6318 250000000 - #define HSSPI_PLL_HZ_6328 133333333 - #define HSSPI_PLL_HZ_6362 400000000 - -@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void) - case BCM3368_CPU_ID: - clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks)); - break; -+ case BCM6318_CPU_ID: -+ clk_hsspi_pll.rate = HSSPI_PLL_HZ_6318; -+ clkdev_add_table(bcm6318_clks, ARRAY_SIZE(bcm6318_clks)); -+ break; - case BCM6328_CPU_ID: - clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328; - clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks)); ---- a/arch/mips/bcm63xx/cpu.c -+++ b/arch/mips/bcm63xx/cpu.c -@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = { - __GEN_CPU_IRQ_TABLE(3368) - }; - -+static const unsigned long bcm6318_regs_base[] = { -+ __GEN_CPU_REGS_TABLE(6318) -+}; -+ -+static const int bcm6318_irqs[] = { -+ __GEN_CPU_IRQ_TABLE(6318) -+}; -+ - static const unsigned long bcm6328_regs_base[] = { - __GEN_CPU_REGS_TABLE(6328) - }; -@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi - return bcm63xx_memory_size; - } - -+#define STRAP_OVERRIDE_BUS_REG 0x0 -+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT 23 -+#define OVERRIDE_BUS_MIPS_FREQ_MASK (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT) -+ - static unsigned int detect_cpu_clock(void) - { - u32 cpu_id = bcm63xx_get_cpu_id(); -@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi - case BCM3368_CPU_ID: - return 300000000; - -+ case BCM6318_CPU_ID: -+ { -+ unsigned int tmp, mips_pll_fcvo; -+ -+ tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG); -+ -+ pr_info("strap_override_bus = %08x\n", tmp); -+ -+ mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK) -+ >> OVERRIDE_BUS_MIPS_FREQ_SHIFT; -+ -+ switch (mips_pll_fcvo) { -+ case 0: -+ return 166000000; -+ case 1: -+ return 400000000; -+ case 2: -+ return 250000000; -+ case 3: -+ return 333000000; -+ }; -+ } - case BCM6328_CPU_ID: - { - unsigned int tmp, mips_pll_fcvo; -@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v - unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; - u32 val; - -+ if (BCMCPU_IS_6318()) { -+ val = bcm_sdram_readl(SDRAM_CFG_REG); -+ val = val & SDRAM_CFG_6318_SPACE_MASK; -+ val >>= SDRAM_CFG_6318_SPACE_SHIFT; -+ return 1 << (val + 20); -+ } -+ - if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) - return bcm_ddr_readl(DDR_CSEND_REG) << 24; - -@@ -343,6 +384,12 @@ void __init bcm63xx_cpu_init(void) - - switch (current_cpu_type()) { - case CPU_BMIPS3300: -+ if ((read_c0_prid() & 0xff) >= 0x33) { -+ /* BCM6318 */ -+ chipid_reg = BCM_6368_PERF_BASE; -+ break; -+ } -+ - if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT) - __cpu_name[cpu] = "Broadcom BCM6338"; - /* fall-through */ -@@ -390,6 +437,10 @@ void __init bcm63xx_cpu_init(void) - bcm63xx_cpu_variant = bcm63xx_cpu_id; - - switch (bcm63xx_cpu_id) { -+ case BCM6318_CPU_ID: -+ bcm63xx_regs_base = bcm6318_regs_base; -+ bcm63xx_irqs = bcm6318_irqs; -+ break; - case BCM3368_CPU_ID: - bcm63xx_regs_base = bcm3368_regs_base; - bcm63xx_irqs = bcm3368_irqs; ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t - u32 val; - - switch (bcm63xx_get_cpu_id()) { -+ case BCM6318_CPU_ID: -+ /* only support serial flash */ -+ return BCM63XX_FLASH_TYPE_SERIAL; - case BCM6328_CPU_ID: - val = bcm_misc_readl(MISC_STRAPBUS_6328_REG); - if (val & STRAPBUS_6328_BOOT_SEL_SERIAL) ---- a/arch/mips/bcm63xx/dev-spi.c -+++ b/arch/mips/bcm63xx/dev-spi.c -@@ -38,7 +38,7 @@ static struct platform_device bcm63xx_sp - - int __init bcm63xx_spi_register(void) - { -- if (BCMCPU_IS_6328() || BCMCPU_IS_6345()) -+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345()) - return -ENODEV; - - spi_resources[0].start = bcm63xx_regset_address(RSET_SPI); ---- a/arch/mips/bcm63xx/irq.c -+++ b/arch/mips/bcm63xx/irq.c -@@ -48,6 +48,19 @@ void __init arch_init_irq(void) - ext_irqs[3] = BCM_3368_EXT_IRQ3; - ext_shift = 4; - break; -+ case BCM6318_CPU_ID: -+ periph_bases[0] += PERF_IRQMASK_6318_REG; -+ periph_irq_count = 1; -+ periph_width = 4; -+ -+ ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318; -+ ext_irq_count = 4; -+ ext_irqs[0] = BCM_6318_EXT_IRQ0; -+ ext_irqs[1] = BCM_6318_EXT_IRQ0; -+ ext_irqs[2] = BCM_6318_EXT_IRQ0; -+ ext_irqs[3] = BCM_6318_EXT_IRQ0; -+ ext_shift = 4; -+ break; - case BCM6328_CPU_ID: - periph_bases[0] += PERF_IRQMASK_6328_REG(0); - periph_bases[1] += PERF_IRQMASK_6328_REG(1); ---- a/arch/mips/bcm63xx/prom.c -+++ b/arch/mips/bcm63xx/prom.c -@@ -68,7 +68,7 @@ void __init prom_init(void) - - if (reg & OTP_6328_REG3_TP1_DISABLED) - bmips_smp_enabled = 0; -- } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) { -+ } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) { - bmips_smp_enabled = 0; - } - ---- a/arch/mips/bcm63xx/reset.c -+++ b/arch/mips/bcm63xx/reset.c -@@ -44,6 +44,23 @@ - #define BCM3368_RESET_PCIE 0 - #define BCM3368_RESET_PCIE_EXT 0 - -+ -+#define BCM6318_RESET_SPI SOFTRESET_6318_SPI_MASK -+#define BCM6318_RESET_ENET 0 -+#define BCM6318_RESET_USBH SOFTRESET_6318_USBH_MASK -+#define BCM6318_RESET_USBD SOFTRESET_6318_USBS_MASK -+#define BCM6318_RESET_DSL 0 -+#define BCM6318_RESET_SAR SOFTRESET_6318_SAR_MASK -+#define BCM6318_RESET_EPHY SOFTRESET_6318_EPHY_MASK -+#define BCM6318_RESET_ENETSW SOFTRESET_6318_ENETSW_MASK -+#define BCM6318_RESET_PCM 0 -+#define BCM6318_RESET_MPI 0 -+#define BCM6318_RESET_PCIE \ -+ (SOFTRESET_6318_PCIE_MASK | \ -+ SOFTRESET_6318_PCIE_CORE_MASK | \ -+ SOFTRESET_6318_PCIE_HARD_MASK) -+#define BCM6318_RESET_PCIE_EXT SOFTRESET_6318_PCIE_EXT_MASK -+ - #define BCM6328_RESET_SPI SOFTRESET_6328_SPI_MASK - #define BCM6328_RESET_ENET 0 - #define BCM6328_RESET_USBH SOFTRESET_6328_USBH_MASK -@@ -148,6 +165,10 @@ static const u32 bcm3368_reset_bits[] = - __GEN_RESET_BITS_TABLE(3368) - }; - -+static const u32 bcm6318_reset_bits[] = { -+ __GEN_RESET_BITS_TABLE(6318) -+}; -+ - static const u32 bcm6328_reset_bits[] = { - __GEN_RESET_BITS_TABLE(6328) - }; -@@ -184,6 +205,9 @@ static int __init bcm63xx_reset_bits_ini - if (BCMCPU_IS_3368()) { - reset_reg = PERF_SOFTRESET_6358_REG; - bcm63xx_reset_bits = bcm3368_reset_bits; -+ } else if (BCMCPU_IS_6318()) { -+ reset_reg = PERF_SOFTRESET_6318_REG; -+ bcm63xx_reset_bits = bcm6318_reset_bits; - } else if (BCMCPU_IS_6328()) { - reset_reg = PERF_SOFTRESET_6328_REG; - bcm63xx_reset_bits = bcm6328_reset_bits; ---- a/arch/mips/bcm63xx/setup.c -+++ b/arch/mips/bcm63xx/setup.c -@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void) - case BCM3368_CPU_ID: - perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368; - break; -+ case BCM6318_CPU_ID: -+ perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318; -+ break; - case BCM6328_CPU_ID: - perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328; - break; -@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void) - bcm6348_a1_reboot(); - - pr_info("triggering watchdog soft-reset...\n"); -- if (BCMCPU_IS_6328()) { -+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) { - bcm_wdt_writel(1, WDT_SOFTRESET_REG); - } else { - reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h -@@ -11,6 +11,7 @@ - * arm mach-types) - */ - #define BCM3368_CPU_ID 0x3368 -+#define BCM6318_CPU_ID 0x6318 - #define BCM6328_CPU_ID 0x6328 - #define BCM63281_CPU_ID 0x63281 - #define BCM63283_CPU_ID 0x63283 -@@ -39,6 +40,10 @@ static inline u32 __pure __bcm63xx_get_c - case BCM3368_CPU_ID: - #endif - -+#ifdef CONFIG_BCM63XX_CPU_6318 -+ case BCM6318_CPU_ID: -+#endif -+ - #ifdef CONFIG_BCM63XX_CPU_6328 - case BCM6328_CPU_ID: - #endif -@@ -88,6 +93,7 @@ static inline u32 __pure bcm63xx_get_cpu - } - - #define BCMCPU_IS_3368() (bcm63xx_get_cpu_id() == BCM3368_CPU_ID) -+#define BCMCPU_IS_6318() (bcm63xx_get_cpu_id() == BCM6318_CPU_ID) - #define BCMCPU_IS_6328() (bcm63xx_get_cpu_id() == BCM6328_CPU_ID) - #define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID) - #define BCMCPU_IS_6345() (bcm63xx_get_cpu_id() == BCM6345_CPU_ID) -@@ -99,6 +105,8 @@ static inline u32 __pure bcm63xx_get_cpu - - #define BCMCPU_VARIANT_IS_3368() \ - (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID) -+#define BCMCPU_VARIANT_IS_6318() \ -+ (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID) - #define BCMCPU_VARIANT_IS_63281() \ - (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID) - #define BCMCPU_VARIANT_IS_63283() \ -@@ -253,6 +261,56 @@ enum bcm63xx_regs_set { - #define BCM_3368_MISC_BASE (0xdeadbeef) - - /* -+ * 6318 register sets base address -+ */ -+#define BCM_6318_DSL_LMEM_BASE (0xdeadbeef) -+#define BCM_6318_PERF_BASE (0xb0000000) -+#define BCM_6318_TIMER_BASE (0xb0000040) -+#define BCM_6318_WDT_BASE (0xb0000068) -+#define BCM_6318_UART0_BASE (0xb0000100) -+#define BCM_6318_UART1_BASE (0xdeadbeef) -+#define BCM_6318_GPIO_BASE (0xb0000080) -+#define BCM_6318_SPI_BASE (0xdeadbeef) -+#define BCM_6318_HSSPI_BASE (0xb0003000) -+#define BCM_6318_UDC0_BASE (0xdeadbeef) -+#define BCM_6318_USBDMA_BASE (0xb0006800) -+#define BCM_6318_OHCI0_BASE (0xb0005100) -+#define BCM_6318_OHCI_PRIV_BASE (0xdeadbeef) -+#define BCM_6318_USBH_PRIV_BASE (0xb0005200) -+#define BCM_6318_USBD_BASE (0xb0006000) -+#define BCM_6318_MPI_BASE (0xdeadbeef) -+#define BCM_6318_PCMCIA_BASE (0xdeadbeef) -+#define BCM_6318_PCIE_BASE (0xb0010000) -+#define BCM_6318_SDRAM_REGS_BASE (0xdeadbeef) -+#define BCM_6318_DSL_BASE (0xdeadbeef) -+#define BCM_6318_UBUS_BASE (0xdeadbeef) -+#define BCM_6318_ENET0_BASE (0xdeadbeef) -+#define BCM_6318_ENET1_BASE (0xdeadbeef) -+#define BCM_6318_ENETDMA_BASE (0xb0088000) -+#define BCM_6318_ENETDMAC_BASE (0xb0088200) -+#define BCM_6318_ENETDMAS_BASE (0xb0088400) -+#define BCM_6318_ENETSW_BASE (0xb0080000) -+#define BCM_6318_EHCI0_BASE (0xb0005000) -+#define BCM_6318_SDRAM_BASE (0xb0004000) -+#define BCM_6318_MEMC_BASE (0xdeadbeef) -+#define BCM_6318_DDR_BASE (0xdeadbeef) -+#define BCM_6318_M2M_BASE (0xdeadbeef) -+#define BCM_6318_ATM_BASE (0xdeadbeef) -+#define BCM_6318_XTM_BASE (0xdeadbeef) -+#define BCM_6318_XTMDMA_BASE (0xb000c000) -+#define BCM_6318_XTMDMAC_BASE (0xdeadbeef) -+#define BCM_6318_XTMDMAS_BASE (0xdeadbeef) -+#define BCM_6318_PCM_BASE (0xdeadbeef) -+#define BCM_6318_PCMDMA_BASE (0xdeadbeef) -+#define BCM_6318_PCMDMAC_BASE (0xdeadbeef) -+#define BCM_6318_PCMDMAS_BASE (0xdeadbeef) -+#define BCM_6318_RNG_BASE (0xdeadbeef) -+#define BCM_6318_MISC_BASE (0xb0000280) -+#define BCM_6318_OTP_BASE (0xdeadbeef) -+ -+#define BCM_6318_STRAP_BASE (0xb0000900) -+ -+/* - * 6328 register sets base address - */ - #define BCM_6328_DSL_LMEM_BASE (0xdeadbeef) -@@ -775,6 +833,55 @@ enum bcm63xx_irq { - #define BCM_3368_EXT_IRQ2 (IRQ_INTERNAL_BASE + 27) - #define BCM_3368_EXT_IRQ3 (IRQ_INTERNAL_BASE + 28) - -+/* -+ * 6318 irqs -+ */ -+#define BCM_6318_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32) -+#define BCM_6318_VERY_HIGH_IRQ_BASE (BCM_6318_HIGH_IRQ_BASE + 32) -+ -+#define BCM_6318_TIMER_IRQ (IRQ_INTERNAL_BASE + 31) -+#define BCM_6318_SPI_IRQ 0 -+#define BCM_6318_UART0_IRQ (IRQ_INTERNAL_BASE + 28) -+#define BCM_6318_UART1_IRQ 0 -+#define BCM_6318_DSL_IRQ (IRQ_INTERNAL_BASE + 21) -+#define BCM_6318_UDC0_IRQ 0 -+#define BCM_6318_ENET0_IRQ 0 -+#define BCM_6318_ENET1_IRQ 0 -+#define BCM_6318_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) -+#define BCM_6318_HSSPI_IRQ (IRQ_INTERNAL_BASE + 29) -+#define BCM_6318_OHCI0_IRQ (BCM_6318_HIGH_IRQ_BASE + 9) -+#define BCM_6318_EHCI0_IRQ (BCM_6318_HIGH_IRQ_BASE + 10) -+#define BCM_6318_USBD_IRQ (IRQ_INTERNAL_BASE + 4) -+#define BCM_6318_USBD_RXDMA0_IRQ (IRQ_INTERNAL_BASE + 5) -+#define BCM_6318_USBD_TXDMA0_IRQ (IRQ_INTERNAL_BASE + 6) -+#define BCM_6318_USBD_RXDMA1_IRQ (IRQ_INTERNAL_BASE + 7) -+#define BCM_6318_USBD_TXDMA1_IRQ (IRQ_INTERNAL_BASE + 8) -+#define BCM_6318_USBD_RXDMA2_IRQ (IRQ_INTERNAL_BASE + 9) -+#define BCM_6318_USBD_TXDMA2_IRQ (IRQ_INTERNAL_BASE + 10) -+#define BCM_6318_PCMCIA_IRQ 0 -+#define BCM_6318_ENET0_RXDMA_IRQ 0 -+#define BCM_6318_ENET0_TXDMA_IRQ 0 -+#define BCM_6318_ENET1_RXDMA_IRQ 0 -+#define BCM_6318_ENET1_TXDMA_IRQ 0 -+#define BCM_6318_PCI_IRQ (IRQ_INTERNAL_BASE + 23) -+#define BCM_6318_ATM_IRQ 0 -+#define BCM_6318_ENETSW_RXDMA0_IRQ (BCM_6318_HIGH_IRQ_BASE + 0) -+#define BCM_6318_ENETSW_RXDMA1_IRQ (BCM_6318_HIGH_IRQ_BASE + 1) -+#define BCM_6318_ENETSW_RXDMA2_IRQ (BCM_6318_HIGH_IRQ_BASE + 2) -+#define BCM_6318_ENETSW_RXDMA3_IRQ (BCM_6318_HIGH_IRQ_BASE + 3) -+#define BCM_6318_ENETSW_TXDMA0_IRQ (BCM_6318_VERY_HIGH_IRQ_BASE + 10) -+#define BCM_6318_ENETSW_TXDMA1_IRQ (BCM_6318_VERY_HIGH_IRQ_BASE + 11) -+#define BCM_6318_ENETSW_TXDMA2_IRQ (BCM_6318_VERY_HIGH_IRQ_BASE + 12) -+#define BCM_6318_ENETSW_TXDMA3_IRQ (BCM_6318_VERY_HIGH_IRQ_BASE + 13) -+#define BCM_6318_XTM_IRQ (BCM_6318_HIGH_IRQ_BASE + 31) -+#define BCM_6318_XTM_DMA0_IRQ (BCM_6318_HIGH_IRQ_BASE + 11) -+ -+#define BCM_6318_PCM_DMA0_IRQ (IRQ_INTERNAL_BASE + 2) -+#define BCM_6318_PCM_DMA1_IRQ (IRQ_INTERNAL_BASE + 3) -+#define BCM_6318_EXT_IRQ0 (IRQ_INTERNAL_BASE + 24) -+#define BCM_6318_EXT_IRQ1 (IRQ_INTERNAL_BASE + 25) -+#define BCM_6318_EXT_IRQ2 (IRQ_INTERNAL_BASE + 26) -+#define BCM_6318_EXT_IRQ3 (IRQ_INTERNAL_BASE + 27) - - /* - * 6328 irqs ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -53,6 +53,39 @@ - CKCTL_3368_EMUSB_EN | \ - CKCTL_3368_USBU_EN) - -+#define CKCTL_6318_ADSL_ASB_EN (1 << 0) -+#define CKCTL_6318_USB_ASB_EN (1 << 1) -+#define CKCTL_6318_MIPS_ASB_EN (1 << 2) -+#define CKCTL_6318_PCIE_ASB_EN (1 << 3) -+#define CKCTL_6318_PHYMIPS_ASB_EN (1 << 4) -+#define CKCTL_6318_ROBOSW_ASB_EN (1 << 5) -+#define CKCTL_6318_SAR_ASB_EN (1 << 6) -+#define CKCTL_6318_SDR_ASB_EN (1 << 7) -+#define CKCTL_6318_SWREG_ASB_EN (1 << 8) -+#define CKCTL_6318_PERIPH_ASB_EN (1 << 9) -+#define CKCTL_6318_CPUBUS160_EN (1 << 10) -+#define CKCTL_6318_ADSL_EN (1 << 11) -+#define CKCTL_6318_SAR125_EN (1 << 12) -+#define CKCTL_6318_MIPS_EN (1 << 13) -+#define CKCTL_6318_PCIE_EN (1 << 14) -+#define CKCTL_6318_ROBOSW250_EN (1 << 16) -+#define CKCTL_6318_ROBOSW025_EN (1 << 17) -+#define CKCTL_6318_SDR_EN (1 << 19) -+#define CKCTL_6318_USB_EN (1 << 20) /* both device and host */ -+#define CKCTL_6318_HSSPI_EN (1 << 25) -+#define CKCTL_6318_PCIE25_EN (1 << 27) -+#define CKCTL_6318_PHYMIPS_EN (1 << 28) -+#define CKCTL_6318_ADSL_AFE_EN (1 << 29) -+#define CKCTL_6318_ADSL_QPROC_EN (1 << 30) -+ -+#define CKCTL_6318_ALL_SAFE_EN (CKCTL_6318_PHYMIPS_EN | \ -+ CKCTL_6318_ADSL_QPROC_EN | \ -+ CKCTL_6318_ADSL_AFE_EN | \ -+ CKCTL_6318_ADSL_EN | \ -+ CKCTL_6318_SAR_EN | \ -+ CKCTL_6318_USB_EN | \ -+ CKCTL_6318_PCIE_EN) -+ - #define CKCTL_6328_PHYMIPS_EN (1 << 0) - #define CKCTL_6328_ADSL_QPROC_EN (1 << 1) - #define CKCTL_6328_ADSL_AFE_EN (1 << 2) -@@ -260,12 +293,27 @@ - CKCTL_63268_TBUS_EN | \ - CKCTL_63268_ROBOSW250_EN) - -+/* UBUS Clock Control register */ -+#define PERF_UB_CKCTL_REG 0x10 -+ -+#define UB_CKCTL_6318_ADSL_EN (1 << 0) -+#define UB_CKCTL_6318_ARB_EN (1 << 1) -+#define UB_CKCTL_6318_MIPS_EN (1 << 2) -+#define UB_CKCTL_6318_PCIE_EN (1 << 3) -+#define UB_CKCTL_6318_PERIPH_EN (1 << 4) -+#define UB_CKCTL_6318_PHYMIPS_EN (1 << 5) -+#define UB_CKCTL_6318_ROBOSW_EN (1 << 6) -+#define UB_CKCTL_6318_SAR_EN (1 << 7) -+#define UB_CKCTL_6318_SDR_EN (1 << 8) -+#define UB_CKCTL_6318_USB_EN (1 << 9) -+ - /* System PLL Control register */ - #define PERF_SYS_PLL_CTL_REG 0x8 - #define SYS_PLL_SOFT_RESET 0x1 - - /* Interrupt Mask register */ - #define PERF_IRQMASK_3368_REG 0xc -+#define PERF_IRQMASK_6318_REG 0x20 - #define PERF_IRQMASK_6328_REG(x) (0x20 + (x) * 0x10) - #define PERF_IRQMASK_6338_REG 0xc - #define PERF_IRQMASK_6345_REG 0xc -@@ -277,6 +325,7 @@ - - /* Interrupt Status register */ - #define PERF_IRQSTAT_3368_REG 0x10 -+#define PERF_IRQSTAT_6318_REG 0x30 - #define PERF_IRQSTAT_6328_REG(x) (0x28 + (x) * 0x10) - #define PERF_IRQSTAT_6338_REG 0x10 - #define PERF_IRQSTAT_6345_REG 0x10 -@@ -288,6 +337,7 @@ - - /* External Interrupt Configuration register */ - #define PERF_EXTIRQ_CFG_REG_3368 0x14 -+#define PERF_EXTIRQ_CFG_REG_6318 0x18 - #define PERF_EXTIRQ_CFG_REG_6328 0x18 - #define PERF_EXTIRQ_CFG_REG_6338 0x14 - #define PERF_EXTIRQ_CFG_REG_6345 0x14 -@@ -322,6 +372,7 @@ - - /* Soft Reset register */ - #define PERF_SOFTRESET_REG 0x28 -+#define PERF_SOFTRESET_6318_REG 0x10 - #define PERF_SOFTRESET_6328_REG 0x10 - #define PERF_SOFTRESET_6358_REG 0x34 - #define PERF_SOFTRESET_6362_REG 0x10 -@@ -335,6 +386,18 @@ - #define SOFTRESET_3368_USBS_MASK (1 << 11) - #define SOFTRESET_3368_PCM_MASK (1 << 13) - -+#define SOFTRESET_6318_SPI_MASK (1 << 0) -+#define SOFTRESET_6318_EPHY_MASK (1 << 1) -+#define SOFTRESET_6318_SAR_MASK (1 << 2) -+#define SOFTRESET_6318_ENETSW_MASK (1 << 3) -+#define SOFTRESET_6318_USBS_MASK (1 << 4) -+#define SOFTRESET_6318_USBH_MASK (1 << 5) -+#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6) -+#define SOFTRESET_6318_PCIE_MASK (1 << 7) -+#define SOFTRESET_6318_PCIE_EXT_MASK (1 << 8) -+#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9) -+#define SOFTRESET_6318_ADSL_MASK (1 << 10) -+ - #define SOFTRESET_6328_SPI_MASK (1 << 0) - #define SOFTRESET_6328_EPHY_MASK (1 << 1) - #define SOFTRESET_6328_SAR_MASK (1 << 2) -@@ -506,8 +569,17 @@ - #define TIMER_IRQSTAT_TIMER1_IR_EN (1 << 9) - #define TIMER_IRQSTAT_TIMER2_IR_EN (1 << 10) - -+#define TIMER_IRQMASK_6318_REG 0x0 -+#define TIMER_IRQSTAT_6318_REG 0x4 -+#define IRQSTATMASK_TIMER0 (1 << 0) -+#define IRQSTATMASK_TIMER1 (1 << 1) -+#define IRQSTATMASK_TIMER2 (1 << 2) -+#define IRQSTATMASK_TIMER3 (1 << 3) -+#define IRQSTATMASK_WDT (1 << 4) -+ - /* Timer control register */ - #define TIMER_CTLx_REG(x) (0x4 + (x * 4)) -+#define TIMER_CTRx_6318_REG(x) (0x8 + (x * 4)) - #define TIMER_CTL0_REG 0x4 - #define TIMER_CTL1_REG 0x8 - #define TIMER_CTL2_REG 0xC -@@ -1254,6 +1326,8 @@ - #define SDRAM_CFG_32B_MASK (1 << SDRAM_CFG_32B_SHIFT) - #define SDRAM_CFG_BANK_SHIFT 13 - #define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT) -+#define SDRAM_CFG_6318_SPACE_SHIFT 4 -+#define SDRAM_CFG_6318_SPACE_MASK (0xf << SDRAM_CFG_6318_SPACE_SHIFT) - - #define SDRAM_MBASE_REG 0xc - ---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h -+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h -@@ -23,6 +23,7 @@ static inline int is_bcm63xx_internal_re - if (offset >= 0xfff00000) - return 1; - break; -+ case BCM6318_CPU_ID: - case BCM6328_CPU_ID: - case BCM6362_CPU_ID: - case BCM6368_CPU_ID: ---- a/arch/mips/bcm63xx/dev-hsspi.c -+++ b/arch/mips/bcm63xx/dev-hsspi.c -@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs - - int __init bcm63xx_hsspi_register(void) - { -- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268()) -+ if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() && -+ !BCMCPU_IS_63268()) - return -ENODEV; - - spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI); ---- a/arch/mips/bcm63xx/dev-usb-usbd.c -+++ b/arch/mips/bcm63xx/dev-usb-usbd.c -@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s - IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 }; - int i; - -- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368()) -+ if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368()) - return 0; - - usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD); ---- a/arch/mips/bcm63xx/dev-enet.c -+++ b/arch/mips/bcm63xx/dev-enet.c -@@ -176,8 +176,8 @@ static int __init register_shared(void) - else - shared_res[0].end += (RSET_ENETDMA_SIZE) - 1; - -- if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() || -- BCMCPU_IS_63268()) -+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || -+ BCMCPU_IS_6368() || BCMCPU_IS_63268()) - chan_count = 32; - else if (BCMCPU_IS_6345()) - chan_count = 8; -@@ -285,8 +285,8 @@ bcm63xx_enetsw_register(const struct bcm - { - int ret; - -- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && -- !BCMCPU_IS_63268()) -+ if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() && -+ !BCMCPU_IS_6368() && !BCMCPU_IS_63268()) - return -ENODEV; - - ret = register_shared(); -@@ -303,7 +303,7 @@ bcm63xx_enetsw_register(const struct bcm - - memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd)); - -- if (BCMCPU_IS_6328()) -+ if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) - enetsw_pd.num_ports = ENETSW_PORTS_6328; - else if (BCMCPU_IS_6362() || BCMCPU_IS_6368()) - enetsw_pd.num_ports = ENETSW_PORTS_6368; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h -@@ -10,6 +10,8 @@ int __init bcm63xx_gpio_init(void); - static inline unsigned long bcm63xx_gpio_count(void) - { - switch (bcm63xx_get_cpu_id()) { -+ case BCM6318_CPU_ID: -+ return 50; - case BCM6328_CPU_ID: - return 32; - case BCM3368_CPU_ID: ---- a/arch/mips/bcm63xx/dev-usb-ehci.c -+++ b/arch/mips/bcm63xx/dev-usb-ehci.c -@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh - - int __init bcm63xx_ehci_register(void) - { -- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368()) -+ if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() && -+ !BCMCPU_IS_6362() && !BCMCPU_IS_6368()) - return 0; - - ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); diff --git a/target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch deleted file mode 100644 index e359311750..0000000000 --- a/target/linux/bcm63xx/patches-4.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch +++ /dev/null @@ -1,156 +0,0 @@ -From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 8 Dec 2013 14:17:50 +0100 -Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals - ---- - arch/mips/bcm63xx/reset.c | 39 ++++++++++++++-------- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h | 2 ++ - arch/mips/pci/pci-bcm63xx.c | 7 ++++ - 3 files changed, 34 insertions(+), 14 deletions(-) - ---- a/arch/mips/bcm63xx/reset.c -+++ b/arch/mips/bcm63xx/reset.c -@@ -29,7 +29,9 @@ - [BCM63XX_RESET_PCM] = BCM## __cpu ##_RESET_PCM, \ - [BCM63XX_RESET_MPI] = BCM## __cpu ##_RESET_MPI, \ - [BCM63XX_RESET_PCIE] = BCM## __cpu ##_RESET_PCIE, \ -- [BCM63XX_RESET_PCIE_EXT] = BCM## __cpu ##_RESET_PCIE_EXT, -+ [BCM63XX_RESET_PCIE_EXT] = BCM## __cpu ##_RESET_PCIE_EXT, \ -+ [BCM63XX_RESET_PCIE_CORE] = BCM## __cpu ##_RESET_PCIE_CORE, \ -+ [BCM63XX_RESET_PCIE_HARD] = BCM## __cpu ##_RESET_PCIE_HARD, - - #define BCM3368_RESET_SPI SOFTRESET_3368_SPI_MASK - #define BCM3368_RESET_ENET SOFTRESET_3368_ENET_MASK -@@ -43,6 +45,8 @@ - #define BCM3368_RESET_MPI SOFTRESET_3368_MPI_MASK - #define BCM3368_RESET_PCIE 0 - #define BCM3368_RESET_PCIE_EXT 0 -+#define BCM3368_RESET_PCIE_CORE 0 -+#define BCM3368_RESET_PCIE_HARD 0 - - - #define BCM6318_RESET_SPI SOFTRESET_6318_SPI_MASK -@@ -55,11 +59,10 @@ - #define BCM6318_RESET_ENETSW SOFTRESET_6318_ENETSW_MASK - #define BCM6318_RESET_PCM 0 - #define BCM6318_RESET_MPI 0 --#define BCM6318_RESET_PCIE \ -- (SOFTRESET_6318_PCIE_MASK | \ -- SOFTRESET_6318_PCIE_CORE_MASK | \ -- SOFTRESET_6318_PCIE_HARD_MASK) -+#define BCM6318_RESET_PCIE SOFTRESET_6318_PCIE_MASK - #define BCM6318_RESET_PCIE_EXT SOFTRESET_6318_PCIE_EXT_MASK -+#define BCM6318_RESET_PCIE_CORE SOFTRESET_6318_PCIE_CORE_MASK -+#define BCM6318_RESET_PCIE_HARD SOFTRESET_6318_PCIE_HARD_MASK - - #define BCM6328_RESET_SPI SOFTRESET_6328_SPI_MASK - #define BCM6328_RESET_ENET 0 -@@ -71,11 +74,10 @@ - #define BCM6328_RESET_ENETSW SOFTRESET_6328_ENETSW_MASK - #define BCM6328_RESET_PCM SOFTRESET_6328_PCM_MASK - #define BCM6328_RESET_MPI 0 --#define BCM6328_RESET_PCIE \ -- (SOFTRESET_6328_PCIE_MASK | \ -- SOFTRESET_6328_PCIE_CORE_MASK | \ -- SOFTRESET_6328_PCIE_HARD_MASK) -+#define BCM6328_RESET_PCIE SOFTRESET_6328_PCIE_MASK - #define BCM6328_RESET_PCIE_EXT SOFTRESET_6328_PCIE_EXT_MASK -+#define BCM6328_RESET_PCIE_CORE SOFTRESET_6328_PCIE_CORE_MASK -+#define BCM6328_RESET_PCIE_HARD SOFTRESET_6328_PCIE_HARD_MASK - - #define BCM6338_RESET_SPI SOFTRESET_6338_SPI_MASK - #define BCM6338_RESET_ENET SOFTRESET_6338_ENET_MASK -@@ -89,6 +91,8 @@ - #define BCM6338_RESET_MPI 0 - #define BCM6338_RESET_PCIE 0 - #define BCM6338_RESET_PCIE_EXT 0 -+#define BCM6338_RESET_PCIE_CORE 0 -+#define BCM6338_RESET_PCIE_HARD 0 - - #define BCM6348_RESET_SPI SOFTRESET_6348_SPI_MASK - #define BCM6348_RESET_ENET SOFTRESET_6348_ENET_MASK -@@ -102,6 +106,8 @@ - #define BCM6348_RESET_MPI 0 - #define BCM6348_RESET_PCIE 0 - #define BCM6348_RESET_PCIE_EXT 0 -+#define BCM6348_RESET_PCIE_CORE 0 -+#define BCM6348_RESET_PCIE_HARD 0 - - #define BCM6358_RESET_SPI SOFTRESET_6358_SPI_MASK - #define BCM6358_RESET_ENET SOFTRESET_6358_ENET_MASK -@@ -115,6 +121,8 @@ - #define BCM6358_RESET_MPI SOFTRESET_6358_MPI_MASK - #define BCM6358_RESET_PCIE 0 - #define BCM6358_RESET_PCIE_EXT 0 -+#define BCM6358_RESET_PCIE_CORE 0 -+#define BCM6358_RESET_PCIE_HARD 0 - - #define BCM6362_RESET_SPI SOFTRESET_6362_SPI_MASK - #define BCM6362_RESET_ENET 0 -@@ -126,9 +134,10 @@ - #define BCM6362_RESET_ENETSW SOFTRESET_6362_ENETSW_MASK - #define BCM6362_RESET_PCM SOFTRESET_6362_PCM_MASK - #define BCM6362_RESET_MPI 0 --#define BCM6362_RESET_PCIE (SOFTRESET_6362_PCIE_MASK | \ -- SOFTRESET_6362_PCIE_CORE_MASK) -+#define BCM6362_RESET_PCIE SOFTRESET_6362_PCIE_MASK - #define BCM6362_RESET_PCIE_EXT SOFTRESET_6362_PCIE_EXT_MASK -+#define BCM6362_RESET_PCIE_CORE SOFTRESET_6362_PCIE_CORE_MASK -+#define BCM6362_RESET_PCIE_HARD 0 - - #define BCM6368_RESET_SPI SOFTRESET_6368_SPI_MASK - #define BCM6368_RESET_ENET 0 -@@ -142,6 +151,8 @@ - #define BCM6368_RESET_MPI SOFTRESET_6368_MPI_MASK - #define BCM6368_RESET_PCIE 0 - #define BCM6368_RESET_PCIE_EXT 0 -+#define BCM6368_RESET_PCIE_CORE 0 -+#define BCM6368_RESET_PCIE_HARD 0 - - #define BCM63268_RESET_SPI SOFTRESET_63268_SPI_MASK - #define BCM63268_RESET_ENET 0 -@@ -153,10 +164,10 @@ - #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK - #define BCM63268_RESET_PCM SOFTRESET_63268_PCM_MASK - #define BCM63268_RESET_MPI 0 --#define BCM63268_RESET_PCIE (SOFTRESET_63268_PCIE_MASK | \ -- SOFTRESET_63268_PCIE_CORE_MASK | \ -- SOFTRESET_63268_PCIE_HARD_MASK) -+#define BCM63268_RESET_PCIE SOFTRESET_63268_PCIE_MASK - #define BCM63268_RESET_PCIE_EXT SOFTRESET_63268_PCIE_EXT_MASK -+#define BCM63268_RESET_PCIE_CORE SOFTRESET_63268_PCIE_CORE_MASK -+#define BCM63268_RESET_PCIE_HARD SOFTRESET_63268_PCIE_HARD_MASK - - /* - * core reset bits ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h -@@ -15,6 +15,8 @@ enum bcm63xx_core_reset { - BCM63XX_RESET_MPI, - BCM63XX_RESET_PCIE, - BCM63XX_RESET_PCIE_EXT, -+ BCM63XX_RESET_PCIE_CORE, -+ BCM63XX_RESET_PCIE_HARD, - }; - - void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset); ---- a/arch/mips/pci/pci-bcm63xx.c -+++ b/arch/mips/pci/pci-bcm63xx.c -@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo - - /* reset the PCIe core */ - bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1); -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1); - bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1); -+ if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) { -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1); -+ mdelay(10); -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0); -+ } - mdelay(10); - -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0); - bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0); - mdelay(10); - diff --git a/target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch deleted file mode 100644 index 3d9835df2c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch +++ /dev/null @@ -1,333 +0,0 @@ -From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 15 Dec 2013 20:47:34 +0100 -Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318 - ---- - arch/mips/bcm63xx/clk.c | 25 ++++- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 6 ++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 60 +++++++++++- - arch/mips/pci/ops-bcm63xx.c | 16 +++- - arch/mips/pci/pci-bcm63xx.c | 106 ++++++++++++++++++---- - 5 files changed, 184 insertions(+), 29 deletions(-) - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -52,6 +52,18 @@ static void bcm_hwclock_set(u32 mask, in - bcm_perf_writel(reg, PERF_CKCTL_REG); - } - -+static void bcm_ub_hwclock_set(u32 mask, int enable) -+{ -+ u32 reg; -+ -+ reg = bcm_perf_readl(PERF_UB_CKCTL_REG); -+ if (enable) -+ reg |= mask; -+ else -+ reg &= ~mask; -+ bcm_perf_writel(reg, PERF_UB_CKCTL_REG); -+} -+ - /* - * Ethernet MAC "misc" clock: dma clocks and main clock on 6348 - */ -@@ -362,12 +374,17 @@ static struct clk clk_ipsec = { - - static void pcie_set(struct clk *clk, int enable) - { -- if (BCMCPU_IS_6328()) -+ if (BCMCPU_IS_6318()) { -+ bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable); -+ bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable); -+ bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable); -+ } else if (BCMCPU_IS_6328()) { - bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable); -- else if (BCMCPU_IS_6362()) -+ } else if (BCMCPU_IS_6362()) { - bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable); -- else if (BCMCPU_IS_63268()) -+ } else if (BCMCPU_IS_63268()) { - bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable); -+ } - } - - static struct clk clk_pcie = { ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h -@@ -41,6 +41,12 @@ - #define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \ - BCM_CB_MEM_SIZE - 1) - -+#define BCM_PCIE_MEM_BASE_PA_6318 0x10200000 -+#define BCM_PCIE_MEM_SIZE_6318 (1 * 1024 * 1024) -+#define BCM_PCIE_MEM_END_PA_6318 (BCM_PCIE_MEM_BASE_PA_6318 + \ -+ BCM_PCIE_MEM_SIZE_6318 - 1) -+ -+ - #define BCM_PCIE_MEM_BASE_PA_6328 0x10f00000 - #define BCM_PCIE_MEM_SIZE_6328 (1 * 1024 * 1024) - #define BCM_PCIE_MEM_END_PA_6328 (BCM_PCIE_MEM_BASE_PA_6328 + \ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -1530,6 +1530,17 @@ - * _REG relative to RSET_PCIE - *************************************************************************/ - -+#define PCIE_SPECIFIC_REG 0x188 -+#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT 0 -+#define SPECIFIC_ENDIAN_MODE_BAR1_MASK (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT) -+#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT 2 -+#define SPECIFIC_ENDIAN_MODE_BAR2_MASK (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT) -+#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT 4 -+#define SPECIFIC_ENDIAN_MODE_BAR3_MASK (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT) -+#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN 0 -+#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1 -+#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN 2 -+ - #define PCIE_CONFIG2_REG 0x408 - #define CONFIG2_BAR1_SIZE_EN 1 - #define CONFIG2_BAR1_SIZE_MASK 0xf -@@ -1575,7 +1586,54 @@ - #define PCIE_RC_INT_C (1 << 2) - #define PCIE_RC_INT_D (1 << 3) - --#define PCIE_DEVICE_OFFSET 0x8000 -+#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG 0x400c -+#define C2P_MEM_WIN_ENDIAN_MODE_MASK 0x3 -+#define C2P_MEM_WIN_ENDIAN_NO_SWAP 0 -+#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1 -+#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2 -+#define C2P_MEM_WIN_BASE_ADDR_SHIFT 20 -+#define C2P_MEM_WIN_BASE_ADDR_MASK (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT) -+ -+#define PCIE_RC_BAR1_CONFIG_LO_REG 0x402c -+#define RC_BAR_CFG_LO_SIZE_256MB 0xd -+#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT 20 -+#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT) -+ -+#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070 -+#define C2P_BASELIMIT_LIMIT_SHIFT 20 -+#define C2P_BASELIMIT_LIMIT_MASK (0xfff << C2P_BASELIMIT_LIMIT_SHIFT) -+#define C2P_BASELIMIT_BASE_SHIFT 4 -+#define C2P_BASELIMIT_BASE_MASK (0xfff << C2P_BASELIMIT_BASE_SHIFT) -+ -+#define PCIE_UBUS_BAR1_CFG_REMAP_REG 0x4088 -+#define BAR1_CFG_REMAP_OFFSET_SHIFT 20 -+#define BAR1_CFG_REMAP_OFFSET_MASK (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT) -+#define BAR1_CFG_REMAP_ACCESS_EN 1 -+ -+#define PCIE_HARD_DEBUG_REG 0x4204 -+#define HARD_DEBUG_SERDES_IDDQ (1 << 23) -+ -+#define PCIE_CPU_INT1_MASK_CLEAR_REG 0x830c -+#define CPU_INT_PCIE_ERR_ATTN_CPU (1 << 0) -+#define CPU_INT_PCIE_INTA (1 << 1) -+#define CPU_INT_PCIE_INTB (1 << 2) -+#define CPU_INT_PCIE_INTC (1 << 3) -+#define CPU_INT_PCIE_INTD (1 << 4) -+#define CPU_INT_PCIE_INTR (1 << 5) -+#define CPU_INT_PCIE_NMI (1 << 6) -+#define CPU_INT_PCIE_UBUS (1 << 7) -+#define CPU_INT_IPI (1 << 8) -+ -+#define PCIE_EXT_CFG_INDEX_REG 0x8400 -+#define EXT_CFG_FUNC_NUM_SHIFT 12 -+#define EXT_CFG_FUNC_NUM_MASK (0x7 << EXT_CFG_FUNC_NUM_SHIFT) -+#define EXT_CFG_DEV_NUM_SHIFT 15 -+#define EXT_CFG_DEV_NUM_MASK (0xf << EXT_CFG_DEV_NUM_SHIFT) -+#define EXT_CFG_BUS_NUM_SHIFT 20 -+#define EXT_CFG_BUS_NUM_MASK (0xff << EXT_CFG_BUS_NUM_SHIFT) -+ -+#define PCIE_DEVICE_OFFSET_6318 0x9000 -+#define PCIE_DEVICE_OFFSET_6328 0x8000 - - /************************************************************************* - * _REG relative to RSET_OTP ---- a/arch/mips/pci/ops-bcm63xx.c -+++ b/arch/mips/pci/ops-bcm63xx.c -@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_ - if (!bcm63xx_pcie_can_access(bus, devfn)) - return PCIBIOS_DEVICE_NOT_FOUND; - -- if (bus->number == PCIE_BUS_DEVICE) -- reg += PCIE_DEVICE_OFFSET; -+ if (bus->number == PCIE_BUS_DEVICE) { -+ if (BCMCPU_IS_6318()) -+ reg += PCIE_DEVICE_OFFSET_6318; -+ else -+ reg += PCIE_DEVICE_OFFSET_6328; -+ } - - data = bcm_pcie_readl(reg); - -@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci - if (!bcm63xx_pcie_can_access(bus, devfn)) - return PCIBIOS_DEVICE_NOT_FOUND; - -- if (bus->number == PCIE_BUS_DEVICE) -- reg += PCIE_DEVICE_OFFSET; -+ if (bus->number == PCIE_BUS_DEVICE) { -+ if (BCMCPU_IS_6318()) -+ reg += PCIE_DEVICE_OFFSET_6318; -+ else -+ reg += PCIE_DEVICE_OFFSET_6328; -+ } - - - data = bcm_pcie_readl(reg); ---- a/arch/mips/pci/pci-bcm63xx.c -+++ b/arch/mips/pci/pci-bcm63xx.c -@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v - - void __iomem *pci_iospace_start; - --static void __init bcm63xx_reset_pcie(void) -+static void __init bcm63xx_reset_pcie_gen1(void) - { - u32 val; - u32 reg; -@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo - mdelay(200); - } - --static struct clk *pcie_clk; -- --static int __init bcm63xx_register_pcie(void) -+static void __init bcm63xx_reset_pcie_gen2(void) - { - u32 val; - -- /* enable clock */ -- pcie_clk = clk_get(NULL, "pcie"); -- if (IS_ERR_OR_NULL(pcie_clk)) -- return -ENODEV; -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0); - -- clk_prepare_enable(pcie_clk); -+ /* reset the PCIe core */ -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1); -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1); -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1); -+ mdelay(10); -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0); -+ mdelay(10); -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0); -+ mdelay(10); -+ val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG); -+ val &= ~HARD_DEBUG_SERDES_IDDQ; -+ bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG); -+ mdelay(10); -+ bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0); -+ mdelay(200); -+} - -- bcm63xx_reset_pcie(); -+static void __init bcm63xx_init_pcie_gen1(void) -+{ -+ u32 val; - - /* configure the PCIe bridge */ - val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG); -@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie( - val |= OPT2_CFG_TYPE1_BD_SEL; - bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG); - -+ /* set bar0 to little endian */ -+ val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT; -+ val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT; -+ val |= BASEMASK_REMAP_EN; -+ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG); -+ -+ val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT; -+ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG); -+} -+ -+static void __init bcm63xx_init_pcie_gen2(void) -+{ -+ u32 val; -+ -+ bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB | -+ CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD, -+ PCIE_CPU_INT1_MASK_CLEAR_REG); -+ -+ val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK; -+ val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) << -+ C2P_BASELIMIT_BASE_SHIFT; -+ -+ bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG); -+ -+ /* set bar0 to little endian */ -+ val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG); -+ val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK; -+ val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP; -+ bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG); -+ -+ bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG); -+ bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG); -+ bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG); -+ -+ bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT, -+ PCIE_EXT_CFG_INDEX_REG); -+} -+ -+static struct clk *pcie_clk; -+ -+static int __init bcm63xx_register_pcie(void) -+{ -+ u32 val; -+ -+ /* enable clock */ -+ pcie_clk = clk_get(NULL, "pcie"); -+ if (IS_ERR_OR_NULL(pcie_clk)) -+ return -ENODEV; -+ -+ clk_prepare_enable(pcie_clk); -+ -+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) { -+ bcm63xx_reset_pcie_gen1(); -+ bcm63xx_init_pcie_gen1(); -+ } else { -+ bcm63xx_reset_pcie_gen2(); -+ bcm63xx_init_pcie_gen2(); -+ } -+ - /* setup class code as bridge */ - val = bcm_pcie_readl(PCIE_IDVAL3_REG); - val &= ~IDVAL3_CLASS_CODE_MASK; -@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie( - val &= ~CONFIG2_BAR1_SIZE_MASK; - bcm_pcie_writel(val, PCIE_CONFIG2_REG); - -- /* set bar0 to little endian */ -- val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT; -- val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT; -- val |= BASEMASK_REMAP_EN; -- bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG); -- -- val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT; -- bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG); -- - register_pci_controller(&bcm63xx_pcie_controller); - - return 0; -@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void) - if (!bcm63xx_pci_enabled) - return -ENODEV; - -- if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) { -+ if (BCMCPU_IS_6318()) { -+ bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318; -+ bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318; -+ } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) { - bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328; - bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328; - } else if (BCMCPU_IS_63268()) { -@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void) - } - - switch (bcm63xx_get_cpu_id()) { -+ case BCM6318_CPU_ID: - case BCM6328_CPU_ID: - case BCM6362_CPU_ID: - case BCM63268_CPU_ID: diff --git a/target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch deleted file mode 100644 index 298fffdfa1..0000000000 --- a/target/linux/bcm63xx/patches-4.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 22 Dec 2013 12:26:57 +0100 -Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the - result - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/dev-flash.c | 10 +++++++--- - arch/mips/bcm63xx/prom.c | 4 ++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++ - 3 files changed, 13 insertions(+), 3 deletions(-) - ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -22,6 +22,8 @@ - #include - #include - -+static int flash_type; -+ - static struct mtd_partition mtd_partitions[] = { - { - .name = "cfe", -@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t - } - } - -+void __init bcm63xx_flash_detect(void) -+{ -+ flash_type = bcm63xx_detect_flash_type(); -+} -+ - int __init bcm63xx_flash_register(void) - { -- int flash_type; - u32 val; - -- flash_type = bcm63xx_detect_flash_type(); -- - switch (flash_type) { - case BCM63XX_FLASH_TYPE_PARALLEL: - /* read base address of boot chip select (0) */ ---- a/arch/mips/bcm63xx/prom.c -+++ b/arch/mips/bcm63xx/prom.c -@@ -17,6 +17,7 @@ - #include - #include - #include -+#include - - void __init prom_init(void) - { -@@ -52,6 +53,9 @@ void __init prom_init(void) - reg &= ~mask; - bcm_perf_writel(reg, PERF_CKCTL_REG); - -+ /* detect and setup flash access */ -+ bcm63xx_flash_detect(); -+ - /* do low level board init */ - board_prom_init(); - ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h -@@ -8,6 +8,8 @@ enum { - BCM63XX_FLASH_TYPE_NAND, - }; - -+void bcm63xx_flash_detect(void); -+ - int __init bcm63xx_flash_register(void); - - #endif /* __BCM63XX_FLASH_H */ diff --git a/target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch deleted file mode 100644 index 329a156fe1..0000000000 --- a/target/linux/bcm63xx/patches-4.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch +++ /dev/null @@ -1,84 +0,0 @@ -From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 22 Dec 2013 13:25:25 +0100 -Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot - -Some bootloaders leave the flash access in an invalid state with dual -read enabled; fix it by disabling it and falling back to simple fast -reads. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/dev-flash.c | 51 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 51 insertions(+) - ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -16,6 +16,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -110,9 +111,59 @@ static int __init bcm63xx_detect_flash_t - } - } - -+#define HSSPI_FLASH_CTRL_REG 0x14 -+#define FLASH_CTRL_READ_OPCODE_MASK 0xff -+#define FLASH_CTRL_ADDR_BYTES_MASK (0x3 << 8) -+#define FLASH_CTRL_ADDR_BYTES_2 (0 << 8) -+#define FLASH_CTRL_ADDR_BYTES_3 (1 << 8) -+#define FLASH_CTRL_ADDR_BYTES_4 (2 << 8) -+#define FLASH_CTRL_DUMMY_BYTES_SHIFT 10 -+#define FLASH_CTRL_DUMMY_BYTES_MASK (0x3 << FLASH_CTRL_DUMMY_BYTES_SHIFT) -+#define FLASH_CTRL_MB_EN (1 << 23) -+ - void __init bcm63xx_flash_detect(void) - { - flash_type = bcm63xx_detect_flash_type(); -+ -+ /* ensure flash mapping has sane values */ -+ if (flash_type == BCM63XX_FLASH_TYPE_SERIAL && -+ (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || -+ BCMCPU_IS_63268())) { -+ u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG); -+ -+ if (val & FLASH_CTRL_MB_EN) { -+ /* cfe might configure non working dual-io mode */ -+ val &= ~FLASH_CTRL_MB_EN; -+ val &= ~FLASH_CTRL_READ_OPCODE_MASK; -+ val &= ~FLASH_CTRL_DUMMY_BYTES_MASK; -+ val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT; -+ -+ switch (val & FLASH_CTRL_ADDR_BYTES_MASK) { -+ case FLASH_CTRL_ADDR_BYTES_3: -+ val |= SPINOR_OP_READ_FAST; -+ break; -+ case FLASH_CTRL_ADDR_BYTES_4: -+ val |= SPINOR_OP_READ_FAST_4B; -+ break; -+ case FLASH_CTRL_ADDR_BYTES_2: -+ default: -+ pr_warn("unsupported address byte mode (%x), not fixing up\n", -+ val & FLASH_CTRL_ADDR_BYTES_MASK); -+ return; -+ } -+ } else { -+ /* ensure dummy bytes is set to 1 for _FAST reads */ -+ u8 cmd = val & FLASH_CTRL_READ_OPCODE_MASK; -+ -+ if (cmd != SPINOR_OP_READ_FAST && cmd != SPINOR_OP_READ_FAST_4B) -+ return; -+ -+ val &= ~FLASH_CTRL_DUMMY_BYTES_MASK; -+ val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT; -+ } -+ -+ bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG); -+ } - } - - int __init bcm63xx_flash_register(void) diff --git a/target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch deleted file mode 100644 index a8eea5b119..0000000000 --- a/target/linux/bcm63xx/patches-4.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -168,7 +168,11 @@ static struct clk clk_swpkt_usb = { - */ - static void enetsw_set(struct clk *clk, int enable) - { -- if (BCMCPU_IS_6328()) { -+ if (BCMCPU_IS_6318()) { -+ bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN | -+ CKCTL_6318_ROBOSW025_EN, enable); -+ bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable); -+ } else if (BCMCPU_IS_6328()) { - bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable); - } else if (BCMCPU_IS_6362()) { - bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable); -@@ -220,18 +224,22 @@ static struct clk clk_pcm = { - */ - static void usbh_set(struct clk *clk, int enable) - { -- if (BCMCPU_IS_6328()) -+ if (BCMCPU_IS_6318()) { -+ bcm_hwclock_set(CKCTL_6318_USB_EN, enable); -+ bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable); -+ } else if (BCMCPU_IS_6328()) { - bcm_hwclock_set(CKCTL_6328_USBH_EN, enable); -- else if (BCMCPU_IS_6348()) -+ } else if (BCMCPU_IS_6348()) { - bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); -- else if (BCMCPU_IS_6362()) -+ } else if (BCMCPU_IS_6362()) { - bcm_hwclock_set(CKCTL_6362_USBH_EN, enable); -- else if (BCMCPU_IS_6368()) -+ } else if (BCMCPU_IS_6368()) { - bcm_hwclock_set(CKCTL_6368_USBH_EN, enable); -- else if (BCMCPU_IS_63268()) -+ } else if (BCMCPU_IS_63268()) { - bcm_hwclock_set(CKCTL_63268_USBH_EN, enable); -- else -+ } else { - return; -+ } - - if (enable) - msleep(100); diff --git a/target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch b/target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch deleted file mode 100644 index 92c37c130f..0000000000 --- a/target/linux/bcm63xx/patches-4.14/347-MIPS-BCM6318-USB-support.patch +++ /dev/null @@ -1,124 +0,0 @@ ---- a/arch/mips/bcm63xx/usb-common.c -+++ b/arch/mips/bcm63xx/usb-common.c -@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void) - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG); - reg |= USBH_PRIV_SETUP_IOC_MASK; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG); -+ } else if (BCMCPU_IS_6318()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG); -+ reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG); -+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG); -+ reg |= USBH_PRIV_SETUP_IOC_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG); -+ reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG); -+ reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG); - } - - spin_unlock_irqrestore(&usb_priv_reg_lock, flags); -@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void) - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG); - reg |= USBH_PRIV_SETUP_IOC_MASK; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG); -+ } else if (BCMCPU_IS_6318()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG); -+ reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG); -+ reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG); -+ reg |= USBH_PRIV_SETUP_IOC_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG); -+ reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG); -+ reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG); - } - - spin_unlock_irqrestore(&usb_priv_reg_lock, flags); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -682,6 +682,12 @@ - #define GPIO_MODE_6368_SPI_SSN4 (1 << 30) - #define GPIO_MODE_6368_SPI_SSN5 (1 << 31) - -+#define GPIO_PINMUX_SEL0_6318 0x1c -+#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26 -+#define GPIO_PINMUX_SEL0_GPIO13_MASK (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT) -+#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT) -+#define GPIO_PINMUX_SEL0_GPIO13_LED (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT) -+#define GPIO_PINMUX_SEL0_GPIO13_GPIO (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT) - - #define GPIO_PINMUX_OTHR_REG 0x24 - #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12 -@@ -1000,6 +1006,7 @@ - - #define USBH_PRIV_SWAP_6358_REG 0x0 - #define USBH_PRIV_SWAP_6368_REG 0x1c -+#define USBH_PRIV_SWAP_6318_REG 0x0c - - #define USBH_PRIV_SWAP_USBD_SHIFT 6 - #define USBH_PRIV_SWAP_USBD_MASK (1 << USBH_PRIV_SWAP_USBD_SHIFT) -@@ -1025,6 +1032,13 @@ - #define USBH_PRIV_SETUP_IOC_SHIFT 4 - #define USBH_PRIV_SETUP_IOC_MASK (1 << USBH_PRIV_SETUP_IOC_SHIFT) - -+#define USBH_PRIV_SETUP_6318_REG 0x00 -+#define USBH_PRIV_PLL_CTRL1_6318_REG 0x04 -+#define USBH_PRIV_PLL_CTRL1_SUSP_EN (1 << 27) -+#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN (1 << 31) -+#define USBH_PRIV_SIM_CTRL_6318_REG 0x20 -+#define USBH_PRIV_SIM_CTRL_LADDR_SEL (1 << 5) -+ - - /************************************************************************* - * _REG relative to RSET_USBD ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -125,6 +125,15 @@ void __init board_early_setup(const stru - } - - bcm_gpio_writel(val, GPIO_MODE_REG); -+ -+#if IS_ENABLED(CONFIG_USB) -+ if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) { -+ val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318); -+ val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK; -+ val |= GPIO_PINMUX_SEL0_GPIO13_PWRON; -+ bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318); -+ } -+#endif - } - - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -23,6 +23,8 @@ config BCM63XX_CPU_6318 - bool "support 6318 CPU" - select SYS_HAS_CPU_BMIPS32_3300 - select HW_HAS_PCI -+ select BCM63XX_OHCI -+ select BCM63XX_EHCI - - config BCM63XX_CPU_6328 - bool "support 6328 CPU" diff --git a/target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch deleted file mode 100644 index cdff8d5a4d..0000000000 --- a/target/linux/bcm63xx/patches-4.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -587,6 +587,9 @@ - #define TIMER_CTL_MONOTONIC_MASK (1 << 30) - #define TIMER_CTL_ENABLE_MASK (1 << 31) - -+/* Clock reset control (63268 only) */ -+#define TIMER_CLK_RST_CTL_REG 0x2c -+#define CLK_RST_CTL_USB_REF_CLK_EN (1 << 18) - - /************************************************************************* - * _REG relative to RSET_WDT -@@ -1534,6 +1537,11 @@ - #define STRAPBUS_63268_FCVO_SHIFT 21 - #define STRAPBUS_63268_FCVO_MASK (0xf << STRAPBUS_63268_FCVO_SHIFT) - -+#define MISC_IDDQ_CTRL_6328_REG 0x48 -+#define MISC_IDDQ_CTRL_63268_REG 0x4c -+ -+#define IDDQ_CTRL_63268_USBH (1 << 4) -+ - #define MISC_STRAPBUS_6328_REG 0x240 - #define STRAPBUS_6328_FCVO_SHIFT 7 - #define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT) ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -64,6 +64,26 @@ static void bcm_ub_hwclock_set(u32 mask, - bcm_perf_writel(reg, PERF_UB_CKCTL_REG); - } - -+static void bcm_misc_iddq_set(u32 mask, int enable) -+{ -+ u32 offset; -+ u32 reg; -+ -+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) -+ offset = MISC_IDDQ_CTRL_6328_REG; -+ else if (BCMCPU_IS_63268()) -+ offset = MISC_IDDQ_CTRL_63268_REG; -+ else -+ return; -+ -+ reg = bcm_misc_readl(offset); -+ if (enable) -+ reg &= ~mask; -+ else -+ reg |= mask; -+ bcm_misc_writel(reg, offset); -+} -+ - /* - * Ethernet MAC "misc" clock: dma clocks and main clock on 6348 - */ -@@ -236,7 +256,17 @@ static void usbh_set(struct clk *clk, in - } else if (BCMCPU_IS_6368()) { - bcm_hwclock_set(CKCTL_6368_USBH_EN, enable); - } else if (BCMCPU_IS_63268()) { -+ u32 reg; -+ - bcm_hwclock_set(CKCTL_63268_USBH_EN, enable); -+ bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable); -+ bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable); -+ reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG); -+ if (enable) -+ reg |= CLK_RST_CTL_USB_REF_CLK_EN; -+ else -+ reg &= ~CLK_RST_CTL_USB_REF_CLK_EN; -+ bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG); - } else { - return; - } diff --git a/target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch deleted file mode 100644 index 41f48b93da..0000000000 --- a/target/linux/bcm63xx/patches-4.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch +++ /dev/null @@ -1,117 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -1034,11 +1034,18 @@ - #define USBH_PRIV_SETUP_6368_REG 0x28 - #define USBH_PRIV_SETUP_IOC_SHIFT 4 - #define USBH_PRIV_SETUP_IOC_MASK (1 << USBH_PRIV_SETUP_IOC_SHIFT) -+#define USBH_PRIV_SETUP_IPP_SHIFT 5 -+#define USBH_PRIV_SETUP_IPP_MASK (1 << USBH_PRIV_SETUP_IPP_SHIFT) - - #define USBH_PRIV_SETUP_6318_REG 0x00 -+#define USBH_PRIV_PLL_CTRL1_6368_REG 0x18 - #define USBH_PRIV_PLL_CTRL1_6318_REG 0x04 --#define USBH_PRIV_PLL_CTRL1_SUSP_EN (1 << 27) --#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN (1 << 31) -+ -+#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN (1 << 27) -+#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN (1 << 31) -+#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN (1 << 9) -+#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10) -+ - #define USBH_PRIV_SIM_CTRL_6318_REG 0x20 - #define USBH_PRIV_SIM_CTRL_LADDR_SEL (1 << 5) - ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -73,6 +73,8 @@ config BCM63XX_CPU_63268 - bool "support 63268 CPU" - select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI -+ select BCM63XX_OHCI -+ select BCM63XX_EHCI - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" ---- a/arch/mips/bcm63xx/dev-usb-ehci.c -+++ b/arch/mips/bcm63xx/dev-usb-ehci.c -@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh - int __init bcm63xx_ehci_register(void) - { - if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() && -- !BCMCPU_IS_6362() && !BCMCPU_IS_6368()) -+ !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268()) - return 0; - - ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); ---- a/arch/mips/bcm63xx/usb-common.c -+++ b/arch/mips/bcm63xx/usb-common.c -@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void) - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG); - reg |= USBH_PRIV_SETUP_IOC_MASK; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG); -+ } else if (BCMCPU_IS_63268()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); -+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG); -+ reg |= USBH_PRIV_SETUP_IOC_MASK; -+ reg &= ~USBH_PRIV_SETUP_IPP_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG); -+ reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN | -+ USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY); -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG); - } else if (BCMCPU_IS_6318()) { - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG); -- reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN; -+ reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG); - - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG); -@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void) - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG); - - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG); -- reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN; -+ reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG); - - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG); -@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void) - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG); - reg |= USBH_PRIV_SETUP_IOC_MASK; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG); -+ } else if (BCMCPU_IS_63268()) { -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG); -+ reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK; -+ reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG); -+ reg |= USBH_PRIV_SETUP_IOC_MASK; -+ reg &= ~USBH_PRIV_SETUP_IPP_MASK; -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG); -+ -+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG); -+ reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN | -+ USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY); -+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG); - } else if (BCMCPU_IS_6318()) { - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG); -- reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN; -+ reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG); - - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG); -@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void) - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG); - - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG); -- reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN; -+ reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG); - - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG); diff --git a/target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch deleted file mode 100644 index 35c2ef63ee..0000000000 --- a/target/linux/bcm63xx/patches-4.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch +++ /dev/null @@ -1,108 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -40,6 +40,7 @@ struct board_info { - - /* USB config */ - struct bcm63xx_usbd_platform_data usbd; -+ unsigned int num_usbh_ports:2; - - /* GPIO LEDs */ - struct gpio_led leds[5]; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h -@@ -1,6 +1,6 @@ - #ifndef BCM63XX_DEV_USB_EHCI_H_ - #define BCM63XX_DEV_USB_EHCI_H_ - --int bcm63xx_ehci_register(void); -+int bcm63xx_ehci_register(unsigned int num_ports); - - #endif /* BCM63XX_DEV_USB_EHCI_H_ */ ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h -@@ -1,6 +1,6 @@ - #ifndef BCM63XX_DEV_USB_OHCI_H_ - #define BCM63XX_DEV_USB_OHCI_H_ - --int bcm63xx_ohci_register(void); -+int bcm63xx_ohci_register(unsigned int num_ports); - - #endif /* BCM63XX_DEV_USB_OHCI_H_ */ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -165,6 +165,8 @@ static struct platform_device bcm63xx_gp - */ - int __init board_register_devices(void) - { -+ int usbh_ports = 0; -+ - if (board.has_uart0) - bcm63xx_uart_register(0); - -@@ -186,14 +188,21 @@ int __init board_register_devices(void) - !board_get_mac_address(board.enetsw.mac_addr)) - bcm63xx_enetsw_register(&board.enetsw); - -+ if ((board.has_ohci0 || board.has_ehci0)) { -+ usbh_ports = board.num_usbh_ports; -+ -+ if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd)) -+ usbh_ports = 1; -+ } -+ - if (board.has_usbd) - bcm63xx_usbd_register(&board.usbd); - - if (board.has_ehci0) -- bcm63xx_ehci_register(); -+ bcm63xx_ehci_register(usbh_ports); - - if (board.has_ohci0) -- bcm63xx_ohci_register(); -+ bcm63xx_ohci_register(usbh_ports); - - /* Generate MAC address for WLAN and register our SPROM, - * do this after registering enet devices ---- a/arch/mips/bcm63xx/dev-usb-ehci.c -+++ b/arch/mips/bcm63xx/dev-usb-ehci.c -@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh - }, - }; - --int __init bcm63xx_ehci_register(void) -+int __init bcm63xx_ehci_register(unsigned int num_ports) - { - if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() && - !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268()) - return 0; - -+ bcm63xx_ehci_pdata.num_ports = num_ports; -+ - ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); - ehci_resources[0].end = ehci_resources[0].start; - ehci_resources[0].end += RSET_EHCI_SIZE - 1; ---- a/arch/mips/bcm63xx/dev-usb-ohci.c -+++ b/arch/mips/bcm63xx/dev-usb-ohci.c -@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc - .big_endian_desc = 1, - .big_endian_mmio = 1, - .no_big_frame_no = 1, -- .num_ports = 1, - .power_on = bcm63xx_ohci_power_on, - .power_off = bcm63xx_ohci_power_off, - .power_suspend = bcm63xx_ohci_power_off, -@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh - }, - }; - --int __init bcm63xx_ohci_register(void) -+int __init bcm63xx_ohci_register(unsigned int num_ports) - { - if (BCMCPU_IS_6345() || BCMCPU_IS_6338()) - return -ENODEV; - -+ bcm63xx_ohci_pdata.num_ports = num_ports; -+ - ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0); - ohci_resources[0].end = ohci_resources[0].start; - ohci_resources[0].end += RSET_OHCI_SIZE - 1; diff --git a/target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch b/target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch deleted file mode 100644 index 531adc9f1b..0000000000 --- a/target/linux/bcm63xx/patches-4.14/351-set-board-usbh-ports.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -576,6 +576,7 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -+ .num_usbh_ports = 2, - - .leds = { - { diff --git a/target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch deleted file mode 100644 index 37d3ff763d..0000000000 --- a/target/linux/bcm63xx/patches-4.14/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 21 Jun 2014 12:47:49 +0200 -Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one - board type - -Use the arguments passed to the kernel to detect being booted with -CFE as the indicator for bcm963xx board support, allowing the -non presence of CFE_EPTSEAL to assume a different board type. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/Kconfig | 7 +++---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +- - arch/mips/bcm63xx/boards/board_common.c | 13 +++++++++++++ - arch/mips/bcm63xx/boards/board_common.h | 6 ++++++ - 4 files changed, 23 insertions(+), 5 deletions(-) - ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -1,12 +1,11 @@ - # SPDX-License-Identifier: GPL-2.0 --choice -- prompt "Board support" -+menu "Board support" - depends on BCM63XX -- default BOARD_BCM963XX - - config BOARD_BCM963XX - bool "Generic Broadcom 963xx boards" - select SSB -+ default y - help - --endchoice -+endmenu ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -686,7 +686,7 @@ static const struct board_info __initcon - /* - * early init callback, read nvram data from flash and checksum it - */ --void __init board_prom_init(void) -+void __init board_bcm963xx_init(void) - { - unsigned int i; - u8 *boot_addr, *cfe; ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -13,6 +13,8 @@ - #include - #include - #include -+#include -+#include - #include - #include - #include -@@ -30,6 +32,8 @@ - #include - #include - -+#include "board_common.h" -+ - #define PFX "board: " - - static struct board_info board; -@@ -80,6 +84,15 @@ const char *board_get_name(void) - return board.name; - } - -+void __init board_prom_init(void) -+{ -+ /* detect bootloader */ -+ if (fw_arg3 == CFE_EPTSEAL) -+ board_bcm963xx_init(); -+ else -+ panic("unsupported bootloader detected"); -+} -+ - static int (*board_get_mac_address)(u8 mac[ETH_ALEN]); - - /* ---- a/arch/mips/bcm63xx/boards/board_common.h -+++ b/arch/mips/bcm63xx/boards/board_common.h -@@ -6,4 +6,10 @@ - void board_early_setup(const struct board_info *board, - int (*get_mac_address)(u8 mac[ETH_ALEN])); - -+#if defined(CONFIG_BOARD_BCM963XX) -+void board_bcm963xx_init(void); -+#else -+static inline void board_bcm963xx_init(void) { } -+#endif -+ - #endif /* __BOARD_COMMON_H */ diff --git a/target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch deleted file mode 100644 index 846f0b81df..0000000000 --- a/target/linux/bcm63xx/patches-4.14/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 9 Mar 2014 04:28:14 +0100 -Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force - flash address - -Allow board implementations to force the physmap address. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/dev-flash.c | 19 ++++++++++++++----- - .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++ - 2 files changed, 16 insertions(+), 5 deletions(-) - ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -58,6 +58,12 @@ static struct platform_device mtd_dev = - }, - }; - -+void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end) -+{ -+ mtd_resources[0].start = start; -+ mtd_resources[0].end = end; -+} -+ - static int __init bcm63xx_detect_flash_type(void) - { - u32 val; -@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void) - - switch (flash_type) { - case BCM63XX_FLASH_TYPE_PARALLEL: -- /* read base address of boot chip select (0) */ -- val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -- val &= MPI_CSBASE_BASE_MASK; - -- mtd_resources[0].start = val; -- mtd_resources[0].end = 0x1FFFFFFF; -+ if (!mtd_resources[0].start) { -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ -+ mtd_resources[0].start = val; -+ mtd_resources[0].end = 0x1FFFFFFF; -+ } - - return platform_device_register(&mtd_dev); - case BCM63XX_FLASH_TYPE_SERIAL: ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h -@@ -10,6 +10,8 @@ enum { - - void bcm63xx_flash_detect(void); - -+void bcm63xx_flash_force_phys_base_address(u32 start, u32 end); -+ - int __init bcm63xx_flash_register(void); - - #endif /* __BCM63XX_FLASH_H */ diff --git a/target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch deleted file mode 100644 index 886fb2d6f3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch +++ /dev/null @@ -1,189 +0,0 @@ -From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 Jul 2014 21:31:12 +0200 -Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own - unit - -In preparation for enhancing it, move it into its own file. Require a -mac address to be passed as the argument to always "reserve" the mac -regardless of the inclusion state of SSB. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/Makefile | 2 +- - arch/mips/bcm63xx/boards/board_common.c | 53 ++-------------- - arch/mips/bcm63xx/sprom.c | 70 ++++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 6 ++ - 4 files changed, 83 insertions(+), 48 deletions(-) - create mode 100644 arch/mips/bcm63xx/sprom.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h - ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -2,7 +2,8 @@ - obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \ - setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ - dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \ -- dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o -+ dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \ -+ sprom.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -39,44 +39,6 @@ - static struct board_info board; - - /* -- * Register a sane SPROMv2 to make the on-board -- * bcm4318 WLAN work -- */ --#ifdef CONFIG_SSB_PCIHOST --static struct ssb_sprom bcm63xx_sprom = { -- .revision = 0x02, -- .board_rev = 0x17, -- .country_code = 0x0, -- .ant_available_bg = 0x3, -- .pa0b0 = 0x15ae, -- .pa0b1 = 0xfa85, -- .pa0b2 = 0xfe8d, -- .pa1b0 = 0xffff, -- .pa1b1 = 0xffff, -- .pa1b2 = 0xffff, -- .gpio0 = 0xff, -- .gpio1 = 0xff, -- .gpio2 = 0xff, -- .gpio3 = 0xff, -- .maxpwr_bg = 0x004c, -- .itssi_bg = 0x00, -- .boardflags_lo = 0x2848, -- .boardflags_hi = 0x0000, --}; -- --int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) --{ -- if (bus->bustype == SSB_BUSTYPE_PCI) { -- memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -- return 0; -- } else { -- printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); -- return -EINVAL; -- } --} --#endif -- --/* - * return board name for /proc/cpuinfo - */ - const char *board_get_name(void) -@@ -179,6 +141,7 @@ static struct platform_device bcm63xx_gp - int __init board_register_devices(void) - { - int usbh_ports = 0; -+ u8 mac[ETH_ALEN]; - - if (board.has_uart0) - bcm63xx_uart_register(0); -@@ -220,15 +183,10 @@ int __init board_register_devices(void) - /* Generate MAC address for WLAN and register our SPROM, - * do this after registering enet devices - */ --#ifdef CONFIG_SSB_PCIHOST -- if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { -- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); -- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); -- if (ssb_arch_register_fallback_sprom( -- &bcm63xx_get_fallback_sprom) < 0) -- pr_err(PFX "failed to register fallback SPROM\n"); -- } --#endif -+ -+ if (board_get_mac_address(mac) || -+ bcm63xx_register_fallback_sprom(mac)) -+ pr_err(PFX "failed to register fallback SPROM\n"); - - bcm63xx_spi_register(); - ---- /dev/null -+++ b/arch/mips/bcm63xx/sprom.c -@@ -0,0 +1,70 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Maxime Bizon -+ * Copyright (C) 2008 Florian Fainelli -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define PFX "sprom: " -+ -+/* -+ * Register a sane SPROMv2 to make the on-board -+ * bcm4318 WLAN work -+ */ -+#ifdef CONFIG_SSB_PCIHOST -+static struct ssb_sprom bcm63xx_sprom = { -+ .revision = 0x02, -+ .board_rev = 0x17, -+ .country_code = 0x0, -+ .ant_available_bg = 0x3, -+ .pa0b0 = 0x15ae, -+ .pa0b1 = 0xfa85, -+ .pa0b2 = 0xfe8d, -+ .pa1b0 = 0xffff, -+ .pa1b1 = 0xffff, -+ .pa1b2 = 0xffff, -+ .gpio0 = 0xff, -+ .gpio1 = 0xff, -+ .gpio2 = 0xff, -+ .gpio3 = 0xff, -+ .maxpwr_bg = 0x004c, -+ .itssi_bg = 0x00, -+ .boardflags_lo = 0x2848, -+ .boardflags_hi = 0x0000, -+}; -+ -+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) -+{ -+ if (bus->bustype == SSB_BUSTYPE_PCI) { -+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -+ return 0; -+ } else { -+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); -+ return -EINVAL; -+ } -+} -+#endif -+ -+int __init bcm63xx_register_fallback_sprom(u8 *mac) -+{ -+ int ret = 0; -+ -+#ifdef CONFIG_SSB_PCIHOST -+ memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN); -+ memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN); -+ memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN); -+ -+ ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom); -+#endif -+ return ret; -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -@@ -0,0 +1,6 @@ -+#ifndef __BCM63XX_FALLBACK_SPROM -+#define __BCM63XX_FALLBACK_SPROM -+ -+int bcm63xx_register_fallback_sprom(u8 *mac); -+ -+#endif diff --git a/target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch b/target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch deleted file mode 100644 index d0e37efd53..0000000000 --- a/target/linux/bcm63xx/patches-4.14/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch +++ /dev/null @@ -1,95 +0,0 @@ -From 9912a8b3c240a9b0af01ff496b7e8ed9e4cc5b82 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 Jul 2014 21:43:49 +0200 -Subject: [PATCH 02/10] MIPS: BCM63XX: use platform data for the sprom - -Similar to ethernet setup, use a platform data struct for passing -the mac. This eliminates the requirement to allocate an array on -stack for the mac passed. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_common.c | 6 ++---- - arch/mips/bcm63xx/sprom.c | 8 ++++---- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 +++++++- - arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 4 ++++ - 4 files changed, 17 insertions(+), 9 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -141,7 +141,6 @@ static struct platform_device bcm63xx_gp - int __init board_register_devices(void) - { - int usbh_ports = 0; -- u8 mac[ETH_ALEN]; - - if (board.has_uart0) - bcm63xx_uart_register(0); -@@ -184,8 +183,8 @@ int __init board_register_devices(void) - * do this after registering enet devices - */ - -- if (board_get_mac_address(mac) || -- bcm63xx_register_fallback_sprom(mac)) -+ if (board_get_mac_address(board.fallback_sprom.mac_addr) || -+ bcm63xx_register_fallback_sprom(&board.fallback_sprom)) - pr_err(PFX "failed to register fallback SPROM\n"); - - bcm63xx_spi_register(); ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -55,14 +55,14 @@ int bcm63xx_get_fallback_sprom(struct ss - } - #endif - --int __init bcm63xx_register_fallback_sprom(u8 *mac) -+int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data) - { - int ret = 0; - - #ifdef CONFIG_SSB_PCIHOST -- memcpy(bcm63xx_sprom.il0mac, mac, ETH_ALEN); -- memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN); -- memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN); -+ memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN); -+ memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN); -+ memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN); - - ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom); - #endif ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -@@ -1,6 +1,12 @@ - #ifndef __BCM63XX_FALLBACK_SPROM - #define __BCM63XX_FALLBACK_SPROM - --int bcm63xx_register_fallback_sprom(u8 *mac); -+#include -+ -+struct fallback_sprom_data { -+ u8 mac_addr[ETH_ALEN]; -+}; -+ -+int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data); - - #endif ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -7,6 +7,7 @@ - #include - #include - #include -+#include - - /* - * flash mapping -@@ -50,6 +51,9 @@ struct board_info { - - /* External PHY reset GPIO flags from gpio.h */ - unsigned long ephy_reset_gpio_flags; -+ -+ /* fallback sprom config */ -+ struct fallback_sprom_data fallback_sprom; - }; - - #endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch b/target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch deleted file mode 100644 index f540eabeff..0000000000 --- a/target/linux/bcm63xx/patches-4.14/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch +++ /dev/null @@ -1,140 +0,0 @@ -From 83131acbfb59760a19f3711c09526e191c8aad54 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 Jul 2014 21:52:56 +0200 -Subject: [PATCH 03/10] MIPS: BCM63XX: make fallback sprom optional - -Some devices do not provide enough mac addresses to populate wifi in -addition to ethernet. - -Use having pci enabled as a rough heuristic which boards should have it -enabled. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 12 ++++++++++++ - arch/mips/bcm63xx/boards/board_common.c | 5 +++-- - arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 1 + - 3 files changed, 16 insertions(+), 2 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -70,6 +70,7 @@ static struct board_info __initdata boar - .has_uart0 = 1, - .has_pci = 1, - .has_usbd = 0, -+ .use_fallback_sprom = 1, - - .usbd = { - .use_fullspeed = 0, -@@ -219,6 +220,7 @@ static struct board_info __initdata boar - .has_uart0 = 1, - .has_enet0 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -264,6 +266,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -316,6 +319,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -370,6 +374,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -420,6 +425,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -443,6 +449,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -461,6 +468,7 @@ static struct board_info __initdata boar - - .has_uart0 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - .has_ohci0 = 1, - - .has_enet0 = 1, -@@ -483,6 +491,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -509,6 +518,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -561,6 +571,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, -@@ -632,6 +643,7 @@ static struct board_info __initdata boar - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -+ .use_fallback_sprom = 1, - - .enet0 = { - .has_phy = 1, ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -183,8 +183,9 @@ int __init board_register_devices(void) - * do this after registering enet devices - */ - -- if (board_get_mac_address(board.fallback_sprom.mac_addr) || -- bcm63xx_register_fallback_sprom(&board.fallback_sprom)) -+ if (board.use_fallback_sprom && -+ (board_get_mac_address(board.fallback_sprom.mac_addr) || -+ bcm63xx_register_fallback_sprom(&board.fallback_sprom))) - pr_err(PFX "failed to register fallback SPROM\n"); - - bcm63xx_spi_register(); ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -33,6 +33,7 @@ struct board_info { - unsigned int has_usbd:1; - unsigned int has_uart0:1; - unsigned int has_uart1:1; -+ unsigned int use_fallback_sprom:1; - - /* ethernet config */ - struct bcm63xx_enet_platform_data enet0; diff --git a/target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch b/target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch deleted file mode 100644 index 0c4a9be47d..0000000000 --- a/target/linux/bcm63xx/patches-4.14/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 1cece9f7aca1f0c193edce201f77a87008c5a405 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 Jul 2014 21:58:38 +0200 -Subject: [PATCH 04/10] MIPS: BCM63XX: allow different types of sprom - -Different chips require different sprom contents, so prepare for -supplying the appropriate sprom type. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/sprom.c | 13 ++++++++++++- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 5 +++++ - 2 files changed, 17 insertions(+), 1 deletion(-) - ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -22,7 +22,7 @@ - * bcm4318 WLAN work - */ - #ifdef CONFIG_SSB_PCIHOST --static struct ssb_sprom bcm63xx_sprom = { -+static __initconst struct ssb_sprom bcm63xx_default_sprom = { - .revision = 0x02, - .board_rev = 0x17, - .country_code = 0x0, -@@ -43,6 +43,8 @@ static struct ssb_sprom bcm63xx_sprom = - .boardflags_hi = 0x0000, - }; - -+static struct ssb_sprom bcm63xx_sprom; -+ - int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) - { - if (bus->bustype == SSB_BUSTYPE_PCI) { -@@ -60,6 +62,15 @@ int __init bcm63xx_register_fallback_spr - int ret = 0; - - #ifdef CONFIG_SSB_PCIHOST -+ switch (data->type) { -+ case SPROM_DEFAULT: -+ memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom, -+ sizeof(bcm63xx_sprom)); -+ break; -+ default: -+ return -EINVAL; -+ } -+ - memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN); - memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -@@ -3,8 +3,13 @@ - - #include - -+enum sprom_type { -+ SPROM_DEFAULT, /* default fallback sprom */ -+}; -+ - struct fallback_sprom_data { - u8 mac_addr[ETH_ALEN]; -+ enum sprom_type type; - }; - - int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data); diff --git a/target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch b/target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch deleted file mode 100644 index 42502eb062..0000000000 --- a/target/linux/bcm63xx/patches-4.14/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch +++ /dev/null @@ -1,517 +0,0 @@ -From cedee63bc73f8b7d45b8c0cba1236986812c1f83 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 Jul 2014 22:16:36 +0200 -Subject: [PATCH 05/10] MIPS: BCM63XX: add support for "raw" sproms - -Allow using raw sprom content as templates. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/sprom.c | 482 ++++++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 482 insertions(+) - ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -55,13 +55,492 @@ int bcm63xx_get_fallback_sprom(struct ss - return -EINVAL; - } - } -+ -+/* FIXME: use lib_sprom after submission upstream */ -+ -+/* Get the word-offset for a SSB_SPROM_XXX define. */ -+#define SPOFF(offset) ((offset) / sizeof(u16)) -+/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ -+#define SPEX16(_outvar, _offset, _mask, _shift) \ -+ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) -+#define SPEX32(_outvar, _offset, _mask, _shift) \ -+ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ -+ in[SPOFF(_offset)]) & (_mask)) >> (_shift)) -+#define SPEX(_outvar, _offset, _mask, _shift) \ -+ SPEX16(_outvar, _offset, _mask, _shift) -+ -+#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ -+ do { \ -+ SPEX(_field[0], _offset + 0, _mask, _shift); \ -+ SPEX(_field[1], _offset + 2, _mask, _shift); \ -+ SPEX(_field[2], _offset + 4, _mask, _shift); \ -+ SPEX(_field[3], _offset + 6, _mask, _shift); \ -+ SPEX(_field[4], _offset + 8, _mask, _shift); \ -+ SPEX(_field[5], _offset + 10, _mask, _shift); \ -+ SPEX(_field[6], _offset + 12, _mask, _shift); \ -+ SPEX(_field[7], _offset + 14, _mask, _shift); \ -+ } while (0) -+ -+ -+static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in, -+ u16 mask, u16 shift) -+{ -+ u16 v; -+ u8 gain; -+ -+ v = in[SPOFF(SSB_SPROM1_AGAIN)]; -+ gain = (v & mask) >> shift; -+ if (gain == 0xFF) -+ gain = 2; /* If unset use 2dBm */ -+ if (sprom_revision == 1) { -+ /* Convert to Q5.2 */ -+ gain <<= 2; -+ } else { -+ /* Q5.2 Fractional part is stored in 0xC0 */ -+ gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2); -+ } -+ -+ return (s8)gain; -+} -+ -+static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in) -+{ -+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); -+ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0); -+ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0); -+ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0); -+ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0); -+ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0); -+ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0); -+ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0); -+ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0); -+ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO, -+ SSB_SPROM2_MAXP_A_LO_SHIFT); -+} -+ -+static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) -+{ -+ u16 loc[3]; -+ -+ if (out->revision == 3) /* rev 3 moved MAC */ -+ loc[0] = SSB_SPROM3_IL0MAC; -+ else { -+ loc[0] = SSB_SPROM1_IL0MAC; -+ loc[1] = SSB_SPROM1_ET0MAC; -+ loc[2] = SSB_SPROM1_ET1MAC; -+ } -+ -+ SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0); -+ SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A, -+ SSB_SPROM1_ETHPHY_ET1A_SHIFT); -+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); -+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); -+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); -+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); -+ if (out->revision == 1) -+ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, -+ SSB_SPROM1_BINF_CCODE_SHIFT); -+ SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, -+ SSB_SPROM1_BINF_ANTA_SHIFT); -+ SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, -+ SSB_SPROM1_BINF_ANTBG_SHIFT); -+ SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0); -+ SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0); -+ SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0); -+ SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0); -+ SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0); -+ SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0); -+ SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0); -+ SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1, -+ SSB_SPROM1_GPIOA_P1_SHIFT); -+ SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0); -+ SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3, -+ SSB_SPROM1_GPIOB_P3_SHIFT); -+ SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A, -+ SSB_SPROM1_MAXPWR_A_SHIFT); -+ SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0); -+ SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A, -+ SSB_SPROM1_ITSSI_A_SHIFT); -+ SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); -+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); -+ -+ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); -+ -+ /* Extract the antenna gain values. */ -+ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, -+ SSB_SPROM1_AGAIN_BG, -+ SSB_SPROM1_AGAIN_BG_SHIFT); -+ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, -+ SSB_SPROM1_AGAIN_A, -+ SSB_SPROM1_AGAIN_A_SHIFT); -+ if (out->revision >= 2) -+ sprom_extract_r23(out, in); -+} -+ -+/* Revs 4 5 and 8 have partially shared layout */ -+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) -+{ -+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, -+ SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT); -+ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, -+ SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT); -+ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, -+ SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT); -+ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, -+ SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT); -+ -+ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, -+ SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT); -+ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, -+ SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT); -+ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, -+ SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT); -+ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, -+ SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT); -+ -+ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, -+ SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT); -+ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, -+ SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT); -+ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, -+ SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT); -+ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, -+ SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT); -+ -+ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, -+ SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT); -+ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, -+ SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT); -+ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, -+ SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); -+ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, -+ SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); -+} -+ -+static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) -+{ -+ u16 il0mac_offset; -+ -+ if (out->revision == 4) -+ il0mac_offset = SSB_SPROM4_IL0MAC; -+ else -+ il0mac_offset = SSB_SPROM5_IL0MAC; -+ -+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); -+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, -+ SSB_SPROM4_ETHPHY_ET1A_SHIFT); -+ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); -+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); -+ if (out->revision == 4) { -+ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); -+ SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); -+ SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); -+ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); -+ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); -+ } else { -+ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0); -+ SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); -+ SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); -+ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); -+ SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0); -+ } -+ SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, -+ SSB_SPROM4_ANTAVAIL_A_SHIFT); -+ SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG, -+ SSB_SPROM4_ANTAVAIL_BG_SHIFT); -+ SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0); -+ SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG, -+ SSB_SPROM4_ITSSI_BG_SHIFT); -+ SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0); -+ SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A, -+ SSB_SPROM4_ITSSI_A_SHIFT); -+ if (out->revision == 4) { -+ SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); -+ SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, -+ SSB_SPROM4_GPIOA_P1_SHIFT); -+ SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); -+ SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, -+ SSB_SPROM4_GPIOB_P3_SHIFT); -+ } else { -+ SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0); -+ SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1, -+ SSB_SPROM5_GPIOA_P1_SHIFT); -+ SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0); -+ SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3, -+ SSB_SPROM5_GPIOB_P3_SHIFT); -+ } -+ -+ /* Extract the antenna gain values. */ -+ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, -+ SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); -+ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, -+ SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); -+ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, -+ SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); -+ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, -+ SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); -+ -+ sprom_extract_r458(out, in); -+ -+ /* TODO - get remaining rev 4 stuff needed */ -+} -+ -+static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) -+{ -+ int i; -+ u16 o; -+ u16 pwr_info_offset[] = { -+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, -+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 -+ }; -+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != -+ ARRAY_SIZE(out->core_pwr_info)); -+ -+ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); -+ SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0); -+ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); -+ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); -+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); -+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); -+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); -+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); -+ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, -+ SSB_SPROM8_ANTAVAIL_A_SHIFT); -+ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, -+ SSB_SPROM8_ANTAVAIL_BG_SHIFT); -+ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); -+ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, -+ SSB_SPROM8_ITSSI_BG_SHIFT); -+ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); -+ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, -+ SSB_SPROM8_ITSSI_A_SHIFT); -+ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); -+ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, -+ SSB_SPROM8_MAXP_AL_SHIFT); -+ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); -+ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, -+ SSB_SPROM8_GPIOA_P1_SHIFT); -+ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); -+ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, -+ SSB_SPROM8_GPIOB_P3_SHIFT); -+ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); -+ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, -+ SSB_SPROM8_TRI5G_SHIFT); -+ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); -+ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, -+ SSB_SPROM8_TRI5GH_SHIFT); -+ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); -+ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, -+ SSB_SPROM8_RXPO5G_SHIFT); -+ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); -+ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, -+ SSB_SPROM8_RSSISMC2G_SHIFT); -+ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, -+ SSB_SPROM8_RSSISAV2G_SHIFT); -+ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, -+ SSB_SPROM8_BXA2G_SHIFT); -+ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); -+ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, -+ SSB_SPROM8_RSSISMC5G_SHIFT); -+ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, -+ SSB_SPROM8_RSSISAV5G_SHIFT); -+ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, -+ SSB_SPROM8_BXA5G_SHIFT); -+ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); -+ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); -+ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); -+ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); -+ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); -+ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); -+ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); -+ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); -+ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); -+ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); -+ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); -+ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); -+ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); -+ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); -+ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); -+ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); -+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); -+ -+ /* Extract the antenna gain values. */ -+ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, -+ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); -+ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, -+ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); -+ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, -+ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); -+ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, -+ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); -+ -+ /* Extract cores power info info */ -+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { -+ o = pwr_info_offset[i]; -+ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, -+ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); -+ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, -+ SSB_SPROM8_2G_MAXP, 0); -+ -+ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); -+ -+ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, -+ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); -+ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, -+ SSB_SPROM8_5G_MAXP, 0); -+ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, -+ SSB_SPROM8_5GH_MAXP, 0); -+ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, -+ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); -+ -+ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); -+ } -+ -+ /* Extract FEM info */ -+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, -+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); -+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, -+ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); -+ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, -+ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); -+ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, -+ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); -+ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, -+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ -+ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, -+ SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); -+ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, -+ SSB_SROM8_FEM_EXTPA_GAIN, SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); -+ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, -+ SSB_SROM8_FEM_PDET_RANGE, SSB_SROM8_FEM_PDET_RANGE_SHIFT); -+ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, -+ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); -+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, -+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ -+ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, -+ SSB_SPROM8_LEDDC_ON_SHIFT); -+ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, -+ SSB_SPROM8_LEDDC_OFF_SHIFT); -+ -+ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, -+ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); -+ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, -+ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); -+ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, -+ SSB_SPROM8_TXRXC_SWITCH_SHIFT); -+ -+ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); -+ -+ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); -+ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); -+ -+ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, -+ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); -+ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, -+ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); -+ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, -+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, -+ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); -+ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, -+ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); -+ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, -+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, -+ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); -+ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, -+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, -+ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); -+ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, -+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, -+ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); -+ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, -+ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); -+ -+ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); -+ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); -+ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); -+ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); -+ -+ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, -+ SSB_SPROM8_THERMAL_TRESH_SHIFT); -+ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, -+ SSB_SPROM8_THERMAL_OFFSET_SHIFT); -+ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, -+ SSB_SPROM8_TEMPDELTA_PHYCAL, -+ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); -+ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, -+ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); -+ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, -+ SSB_SPROM8_TEMPDELTA_HYSTERESIS, -+ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); -+ sprom_extract_r458(out, in); -+ -+ /* TODO - get remaining rev 8 stuff needed */ -+} -+ -+static int sprom_extract(struct ssb_sprom *out, const u16 *in, u16 size) -+{ -+ memset(out, 0, sizeof(*out)); -+ -+ out->revision = in[size - 1] & 0x00FF; -+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ -+ memset(out->et1mac, 0xFF, 6); -+ -+ switch (out->revision) { -+ case 1: -+ case 2: -+ case 3: -+ sprom_extract_r123(out, in); -+ break; -+ case 4: -+ case 5: -+ sprom_extract_r45(out, in); -+ break; -+ case 8: -+ sprom_extract_r8(out, in); -+ break; -+ default: -+ pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n", -+ out->revision); -+ out->revision = 1; -+ sprom_extract_r123(out, in); -+ } -+ -+ if (out->boardflags_lo == 0xFFFF) -+ out->boardflags_lo = 0; /* per specs */ -+ if (out->boardflags_hi == 0xFFFF) -+ out->boardflags_hi = 0; /* per specs */ -+ -+ return 0; -+} -+ -+static __initdata u16 template_sprom[220]; - #endif - -+ - int __init bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data) - { - int ret = 0; - - #ifdef CONFIG_SSB_PCIHOST -+ u16 size = 0; -+ - switch (data->type) { - case SPROM_DEFAULT: - memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom, -@@ -71,6 +550,9 @@ int __init bcm63xx_register_fallback_spr - return -EINVAL; - } - -+ if (size > 0) -+ sprom_extract(&bcm63xx_sprom, template_sprom, size); -+ - memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN); - memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN); diff --git a/target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch b/target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch deleted file mode 100644 index 65c00b5197..0000000000 --- a/target/linux/bcm63xx/patches-4.14/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch +++ /dev/null @@ -1,181 +0,0 @@ -From 7be5bb46003295c9e04fd4e795593b2deaacd783 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 Jul 2014 22:33:38 +0200 -Subject: [PATCH 06/10] MIPS: BCM63XX: add raw fallback sproms for most common - ssb cards - -Add template sproms for BCM4306, BCM4318, BCM4321, BCM4322, and BCM43222. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/sprom.c | 136 +++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 6 + - 2 files changed, 142 insertions(+) - ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -43,6 +43,122 @@ static __initconst struct ssb_sprom bcm6 - .boardflags_hi = 0x0000, - }; - -+ -+static __initconst u16 bcm4306_sprom[] = { -+ 0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002, -+ 0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3034, 0x14d4, -+ 0xfa91, 0xfe60, 0xffff, 0xffff, 0x004c, 0xffff, 0xffff, 0xffff, -+ 0x003e, 0x0a49, 0xff02, 0x0000, 0xff10, 0xffff, 0xffff, 0x0002, -+}; -+ -+static __initconst u16 bcm4318_sprom[] = { -+ 0x2001, 0x0000, 0x0449, 0x14e4, 0x4318, 0x8000, 0x0002, 0x0000, -+ 0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x3046, 0x15a7, -+ 0xfab0, 0xfe97, 0xffff, 0xffff, 0x0048, 0xffff, 0xffff, 0xffff, -+ 0x003e, 0xea49, 0xff02, 0x0000, 0xff08, 0xffff, 0xffff, 0x0002, -+}; -+ -+static __initconst u16 bcm4321_sprom[] = { -+ 0x3001, 0x0000, 0x046c, 0x14e4, 0x4328, 0x8000, 0x0002, 0x0000, -+ 0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x5372, 0x0032, 0x4a01, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202, -+ 0xffff, 0x2728, 0x5b5b, 0x222b, 0x5b5b, 0x1927, 0x5b5b, 0x1e36, -+ 0x5b5b, 0x303c, 0x3030, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x3e4c, 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0x3e4c, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x7838, 0x3a34, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0x0008, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0x0004, -+}; -+ -+static __initconst u16 bcm4322_sprom[] = { -+ 0x3001, 0x0000, 0x04bc, 0x14e4, 0x432c, 0x8000, 0x0002, 0x0000, -+ 0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x5372, 0x1209, 0x0200, 0x0000, 0x0400, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202, -+ 0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0301, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x2048, 0xfe9a, 0x1571, 0xfabd, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x2048, 0xfeb9, 0x159f, 0xfadd, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x3333, 0x5555, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0x0008, -+}; -+ -+static __initconst u16 bcm43222_sprom[] = { -+ 0x2001, 0x0000, 0x04d4, 0x14e4, 0x4351, 0x8000, 0x0002, 0x0000, -+ 0x1730, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x5372, 0x2305, 0x0200, 0x0000, 0x2400, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0x0303, 0x0202, -+ 0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x204c, 0xfea6, 0x1717, 0xfa6d, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x204c, 0xfeb8, 0x167c, 0xfa9e, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0000, 0x3333, 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, 0x3333, -+ 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0x0008, -+}; -+ - static struct ssb_sprom bcm63xx_sprom; - - int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) -@@ -542,6 +658,26 @@ int __init bcm63xx_register_fallback_spr - u16 size = 0; - - switch (data->type) { -+ case SPROM_BCM4306: -+ memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom)); -+ size = ARRAY_SIZE(bcm4306_sprom); -+ break; -+ case SPROM_BCM4318: -+ memcpy(&template_sprom, &bcm4318_sprom, sizeof(bcm4318_sprom)); -+ size = ARRAY_SIZE(bcm4318_sprom); -+ break; -+ case SPROM_BCM4321: -+ memcpy(&template_sprom, &bcm4321_sprom, sizeof(bcm4321_sprom)); -+ size = ARRAY_SIZE(bcm4321_sprom); -+ break; -+ case SPROM_BCM4322: -+ memcpy(&template_sprom, &bcm4322_sprom, sizeof(bcm4322_sprom)); -+ size = ARRAY_SIZE(bcm4322_sprom); -+ break; -+ case SPROM_BCM43222: -+ memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom)); -+ size = ARRAY_SIZE(bcm43222_sprom); -+ break; - case SPROM_DEFAULT: - memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom, - sizeof(bcm63xx_sprom)); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -@@ -5,6 +5,12 @@ - - enum sprom_type { - SPROM_DEFAULT, /* default fallback sprom */ -+ /* SSB based */ -+ SPROM_BCM4306, -+ SPROM_BCM4318, -+ SPROM_BCM4321, -+ SPROM_BCM4322, -+ SPROM_BCM43222, - }; - - struct fallback_sprom_data { diff --git a/target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch b/target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch deleted file mode 100644 index 416aa9dc4d..0000000000 --- a/target/linux/bcm63xx/patches-4.14/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch +++ /dev/null @@ -1,128 +0,0 @@ -From 03feb9db77fba3eef3d83e17a87a56979659b248 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 Jul 2014 22:48:26 +0200 -Subject: [PATCH 07/10] MIPS: BCM63XX: also register a fallback sprom for bcma - -Similar to SSB, register a fallback sprom handler for BCMA. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/Kconfig | 1 + - arch/mips/bcm63xx/sprom.c | 40 +++++++++++++++++++++++++++++++++++----- - 2 files changed, 36 insertions(+), 5 deletions(-) - ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -5,6 +5,7 @@ menu "Board support" - config BOARD_BCM963XX - bool "Generic Broadcom 963xx boards" - select SSB -+ select BCMA - default y - help - ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -12,6 +12,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -21,7 +22,7 @@ - * Register a sane SPROMv2 to make the on-board - * bcm4318 WLAN work - */ --#ifdef CONFIG_SSB_PCIHOST -+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) - static __initconst struct ssb_sprom bcm63xx_default_sprom = { - .revision = 0x02, - .board_rev = 0x17, -@@ -43,7 +44,7 @@ static __initconst struct ssb_sprom bcm6 - .boardflags_hi = 0x0000, - }; - -- -+#if defined (CONFIG_SSB_PCIHOST) - static __initconst u16 bcm4306_sprom[] = { - 0x4001, 0x0000, 0x0453, 0x14e4, 0x4320, 0x8000, 0x0002, 0x0002, - 0x1000, 0x1800, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, -@@ -158,10 +159,12 @@ static __initconst u16 bcm43222_sprom[] - 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0xffff, 0x0008, - }; -+#endif /* CONFIG_SSB_PCIHOST */ - - static struct ssb_sprom bcm63xx_sprom; - --int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) -+#if defined(CONFIG_SSB_PCIHOST) -+int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out) - { - if (bus->bustype == SSB_BUSTYPE_PCI) { - memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -@@ -171,6 +174,20 @@ int bcm63xx_get_fallback_sprom(struct ss - return -EINVAL; - } - } -+#endif -+ -+#if defined(CONFIG_BCMA_HOST_PCI) -+int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out) -+{ -+ if (bus->hosttype == BCMA_HOSTTYPE_PCI) { -+ memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -+ return 0; -+ } else { -+ printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); -+ return -EINVAL; -+ } -+} -+#endif - - /* FIXME: use lib_sprom after submission upstream */ - -@@ -654,10 +671,11 @@ int __init bcm63xx_register_fallback_spr - { - int ret = 0; - --#ifdef CONFIG_SSB_PCIHOST -+#if defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) - u16 size = 0; - - switch (data->type) { -+#if defined(CONFIG_SSB_PCIHOST) - case SPROM_BCM4306: - memcpy(&template_sprom, &bcm4306_sprom, sizeof(bcm4306_sprom)); - size = ARRAY_SIZE(bcm4306_sprom); -@@ -678,6 +696,7 @@ int __init bcm63xx_register_fallback_spr - memcpy(&template_sprom, &bcm43222_sprom, sizeof(bcm43222_sprom)); - size = ARRAY_SIZE(bcm43222_sprom); - break; -+#endif - case SPROM_DEFAULT: - memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom, - sizeof(bcm63xx_sprom)); -@@ -692,8 +711,19 @@ int __init bcm63xx_register_fallback_spr - memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN); - memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN); -+#endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */ -+ -+#if defined(CONFIG_SSB_PCIHOST) -+ ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_ssb_sprom); -+ if (ret) -+ return ret; -+ -+#endif - -- ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom); -+#if defined(CONFIG_BCMA_HOST_PCI) -+ ret = bcma_arch_register_fallback_sprom(bcm63xx_get_fallback_bcma_sprom); -+ if (ret) -+ return ret; - #endif - return ret; - } diff --git a/target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch b/target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch deleted file mode 100644 index 5c0abb90e3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch +++ /dev/null @@ -1,303 +0,0 @@ -From 27bf70e3fe797691b17df07ecbfaf9f5a4419f49 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 30 Jul 2014 23:14:27 +0200 -Subject: [PATCH 08/10] MIPS: BCM63XX: add BCMA based sprom templates - -Add fallback sproms for BCM4313, BCM43131, BCM43217, BCM43225, BCM43227, -BCM43228, and BCM4331. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/sprom.c | 256 +++++++++++++++++++++ - .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 + - 2 files changed, 264 insertions(+) - ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -161,6 +161,226 @@ static __initconst u16 bcm43222_sprom[] - }; - #endif /* CONFIG_SSB_PCIHOST */ - -+#if defined(CONFIG_BCMA_HOST_PCI) -+static __initconst u16 bcm4313_sprom[] = { -+ 0x2801, 0x0000, 0x0510, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4, -+ 0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820, -+ 0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100, -+ 0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x4727, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x5372, 0x1215, 0x2a00, 0x0800, 0x0800, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202, -+ 0xffff, 0x0011, 0x007a, 0x0000, 0x0000, 0x0000, 0x0000, 0x0201, -+ 0x0000, 0x7800, 0x7c0a, 0x0398, 0x0008, 0x0000, 0x0000, 0x0000, -+ 0x0044, 0x1684, 0xfd0d, 0xff35, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0048, 0xfed2, 0x15d9, 0xfac6, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0008, -+}; -+ -+static __initconst u16 bcm43131_sprom[] = { -+ 0x2801, 0x0000, 0x05f7, 0x14e4, 0x0070, 0xedbe, 0x1c00, 0x2bc4, -+ 0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820, -+ 0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100, -+ 0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x43aa, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x5372, 0x1280, 0x0200, 0x0000, 0x8800, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0002, 0x0202, -+ 0xffff, 0x0022, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415, -+ 0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666, -+ 0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0x0008, -+}; -+ -+static __initconst u16 bcm43217_sprom[] = { -+ 0x2801, 0x0000, 0x05e9, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4, -+ 0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820, -+ 0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100, -+ 0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x43a9, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x5372, 0x1252, 0x0200, 0x0000, 0x9800, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202, -+ 0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415, -+ 0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x204c, 0xfe96, 0x192c, 0xfa15, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x204c, 0xfe91, 0x1950, 0xfa0a, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666, -+ 0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0x7a08, -+}; -+ -+static __initconst u16 bcm43225_sprom[] = { -+ 0x2801, 0x0000, 0x04da, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4, -+ 0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820, -+ 0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100, -+ 0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0x1008, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x4357, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x5372, 0x1200, 0x0200, 0x0000, 0x1000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x88ff, 0xffff, 0xffff, 0x0303, 0x0202, -+ 0xffff, 0x0033, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325, -+ 0xffff, 0x7800, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x204e, 0xfead, 0x1611, 0xfa9a, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x204e, 0xfec1, 0x1674, 0xfab2, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0000, 0x5555, 0x5555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, 0x7555, 0x5555, -+ 0x7555, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0002, 0x0000, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0x0008, -+}; -+ -+static __initconst u16 bcm43227_sprom[] = { -+ 0x2801, 0x0000, 0x0543, 0x14e4, 0x0070, 0xedbe, 0x0000, 0x2bc4, -+ 0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820, -+ 0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100, -+ 0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x4358, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x5372, 0x1402, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0003, 0x0202, -+ 0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0415, -+ 0x0000, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x204c, 0xff36, 0x16d2, 0xfaae, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x204c, 0xfeca, 0x159b, 0xfa80, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0000, 0x4444, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x6666, 0x6666, 0x6666, -+ 0x6666, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0x0008, -+}; -+ -+static __initconst u16 bcm43228_sprom[] = { -+ 0x2801, 0x0000, 0x0011, 0x1028, 0x0070, 0xedbe, 0x0000, 0x2bc4, -+ 0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820, -+ 0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100, -+ 0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x1008, 0x0305, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x4359, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x5372, 0x1203, 0x0200, 0x0000, 0x0800, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0003, 0xffff, 0x88ff, 0xffff, 0x0303, 0x0202, -+ 0xffff, 0x0033, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0215, -+ 0x0215, 0x7800, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x204c, 0xff73, 0x1762, 0xfaa4, 0x3e34, 0x3434, 0xfea1, 0x154c, -+ 0xfad0, 0xfea1, 0x144c, 0xfafb, 0xfe7b, 0x13fe, 0xfafc, 0x0000, -+ 0x204c, 0xff41, 0x16a3, 0xfa8f, 0x3e34, 0x3434, 0xfe97, 0x1446, -+ 0xfb05, 0xfe97, 0x1346, 0xfb32, 0xfeb9, 0x1516, 0xfaee, 0x0000, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0000, 0x4444, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x4444, 0x4444, 0x4444, 0x4444, 0x8888, 0x8888, 0x8888, -+ 0x8888, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333, -+ 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333, -+ 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0x3333, 0x3333, 0x3333, -+ 0x3333, 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xf008, -+}; -+ -+static __initconst u16 bcm4331_sprom[] = { -+ 0x2801, 0x0000, 0x0525, 0x14e4, 0x0078, 0xedbe, 0x0000, 0x2bc4, -+ 0x2a64, 0x2964, 0x2c64, 0x3ce7, 0x46ff, 0x47ff, 0x0c00, 0x0820, -+ 0x0030, 0x1002, 0x9f28, 0x5d44, 0x8080, 0x1d8f, 0x0032, 0x0100, -+ 0xdf00, 0x71f5, 0x8400, 0x0083, 0x8500, 0x2010, 0x0001, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0x1010, 0x0005, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x4331, 0x8000, 0x0002, 0x0000, 0x1f30, 0x1800, 0x0000, 0x0000, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x5372, 0x1104, 0x0200, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0xffff, 0x88ff, 0xffff, 0x0707, 0x0202, -+ 0xff02, 0x0077, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0x0325, -+ 0x0325, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x2048, 0xfe56, 0x16f2, 0xfa44, 0x3e3c, 0x3c3c, 0xfe77, 0x1657, -+ 0xfa75, 0xffff, 0xffff, 0xffff, 0xfe76, 0x15da, 0xfa85, 0x0000, -+ 0x2048, 0xfe5c, 0x16b5, 0xfa56, 0x3e3c, 0x3c3c, 0xfe7c, 0x169d, -+ 0xfa6b, 0xffff, 0xffff, 0xffff, 0xfe7a, 0x1597, 0xfa97, 0x0000, -+ 0x2048, 0xfe68, 0x1734, 0xfa46, 0x3e3c, 0x3c3c, 0xfe7f, 0x15e4, -+ 0xfa94, 0xffff, 0xffff, 0xffff, 0xfe7d, 0x1582, 0xfa9f, 0x0000, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0x0009, -+}; -+ -+#endif /* CONFIG_BCMA_HOST_PCI */ -+ - static struct ssb_sprom bcm63xx_sprom; - - #if defined(CONFIG_SSB_PCIHOST) -@@ -697,6 +917,42 @@ int __init bcm63xx_register_fallback_spr - size = ARRAY_SIZE(bcm43222_sprom); - break; - #endif -+#if defined(CONFIG_BCMA_HOST_PCI) -+ case SPROM_BCM4313: -+ memcpy(&template_sprom, &bcm4313_sprom, -+ sizeof(bcm4313_sprom)); -+ size = ARRAY_SIZE(bcm4313_sprom); -+ break; -+ case SPROM_BCM43131: -+ memcpy(&template_sprom, &bcm43131_sprom, -+ sizeof(bcm43131_sprom)); -+ size = ARRAY_SIZE(bcm43131_sprom); -+ break; -+ case SPROM_BCM43217: -+ memcpy(&template_sprom, &bcm43217_sprom, -+ sizeof(bcm43217_sprom)); -+ size = ARRAY_SIZE(bcm43217_sprom); -+ break; -+ case SPROM_BCM43225: -+ memcpy(&template_sprom, &bcm43225_sprom, -+ sizeof(bcm43225_sprom)); -+ size = ARRAY_SIZE(bcm43225_sprom); -+ break; -+ case SPROM_BCM43227: -+ memcpy(&template_sprom, &bcm43227_sprom, -+ sizeof(bcm43227_sprom)); -+ size = ARRAY_SIZE(bcm43227_sprom); -+ break; -+ case SPROM_BCM43228: -+ memcpy(&template_sprom, &bcm43228_sprom, -+ sizeof(bcm43228_sprom)); -+ size = ARRAY_SIZE(bcm43228_sprom); -+ break; -+ case SPROM_BCM4331: -+ memcpy(&template_sprom, &bcm4331_sprom, sizeof(&bcm4331_sprom)); -+ size = ARRAY_SIZE(bcm4331_sprom); -+ break; -+#endif - case SPROM_DEFAULT: - memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom, - sizeof(bcm63xx_sprom)); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -@@ -11,6 +11,14 @@ enum sprom_type { - SPROM_BCM4321, - SPROM_BCM4322, - SPROM_BCM43222, -+ /* BCMA based */ -+ SPROM_BCM4313, -+ SPROM_BCM43131, -+ SPROM_BCM43217, -+ SPROM_BCM43225, -+ SPROM_BCM43227, -+ SPROM_BCM43228, -+ SPROM_BCM4331, - }; - - struct fallback_sprom_data { diff --git a/target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch b/target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch deleted file mode 100644 index 74c2846d5f..0000000000 --- a/target/linux/bcm63xx/patches-4.14/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 8575548b08e33c9ff4fd540abec09dd177e33682 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Thu, 31 Jul 2014 19:12:33 +0200 -Subject: [PATCH 09/10] MIPS: BCM63XX: allow board files to provide sprom - fixups - -Allow board_info files to supply fixups for the base sproms to adapt -them to the actual used sprom contents in case they do not use the -default ones. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/sprom.c | 14 +++++++++++++- - .../mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 8 ++++++++ - 2 files changed, 21 insertions(+), 1 deletion(-) - ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -883,6 +883,14 @@ static int sprom_extract(struct ssb_spro - return 0; - } - -+void sprom_apply_fixups(u16 *sprom, struct sprom_fixup *fixups, int n) -+{ -+ unsigned int i; -+ -+ for (i = 0; i < n; i++) -+ sprom[fixups[i].offset] = fixups[i].value; -+} -+ - static __initdata u16 template_sprom[220]; - #endif - -@@ -961,8 +969,12 @@ int __init bcm63xx_register_fallback_spr - return -EINVAL; - } - -- if (size > 0) -+ if (size > 0) { -+ sprom_apply_fixups(template_sprom, data->board_fixups, -+ data->num_board_fixups); -+ - sprom_extract(&bcm63xx_sprom, template_sprom, size); -+ } - - memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN); - memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -@@ -21,9 +21,17 @@ enum sprom_type { - SPROM_BCM4331, - }; - -+struct sprom_fixup { -+ u16 offset; -+ u16 value; -+}; -+ - struct fallback_sprom_data { - u8 mac_addr[ETH_ALEN]; - enum sprom_type type; -+ -+ struct sprom_fixup *board_fixups; -+ unsigned int num_board_fixups; - }; - - int bcm63xx_register_fallback_sprom(struct fallback_sprom_data *data); diff --git a/target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch b/target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch deleted file mode 100644 index 40591e5f2e..0000000000 --- a/target/linux/bcm63xx/patches-4.14/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch +++ /dev/null @@ -1,102 +0,0 @@ -From f393eaacf178e7e8a61eb11a96edd7dfb35cb49d Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Thu, 31 Jul 2014 20:39:44 +0200 -Subject: [PATCH 10/10] MIPS: BCM63XX: allow setting a pci bus/device for - fallback sprom - -Warn if the set pci bus/slot does not match the actual request. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/sprom.c | 31 ++++++++++++++++++---- - .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h | 3 +++ - 2 files changed, 29 insertions(+), 5 deletions(-) - ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -381,13 +381,25 @@ static __initconst u16 bcm4331_sprom[] = - - #endif /* CONFIG_BCMA_HOST_PCI */ - --static struct ssb_sprom bcm63xx_sprom; -+struct fallback_sprom_match { -+ u8 pci_bus; -+ u8 pci_dev; -+ struct ssb_sprom sprom; -+}; -+ -+static struct fallback_sprom_match fallback_sprom; - - #if defined(CONFIG_SSB_PCIHOST) - int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out) - { - if (bus->bustype == SSB_BUSTYPE_PCI) { -- memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -+ if (bus->host_pci->bus->number != fallback_sprom.pci_bus || -+ PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev) -+ pr_warn("ssb_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n", -+ fallback_sprom.pci_bus, fallback_sprom.pci_dev, -+ bus->host_pci->bus->number, -+ PCI_SLOT(bus->host_pci->devfn)); -+ memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom)); - return 0; - } else { - printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); -@@ -400,7 +412,13 @@ int bcm63xx_get_fallback_ssb_sprom(struc - int bcm63xx_get_fallback_bcma_sprom(struct bcma_bus *bus, struct ssb_sprom *out) - { - if (bus->hosttype == BCMA_HOSTTYPE_PCI) { -- memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); -+ if (bus->host_pci->bus->number != fallback_sprom.pci_bus || -+ PCI_SLOT(bus->host_pci->devfn) != fallback_sprom.pci_dev) -+ pr_warn("bcma_fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n", -+ fallback_sprom.pci_bus, fallback_sprom.pci_dev, -+ bus->host_pci->bus->number, -+ PCI_SLOT(bus->host_pci->devfn)); -+ memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom)); - return 0; - } else { - printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); -@@ -962,8 +980,8 @@ int __init bcm63xx_register_fallback_spr - break; - #endif - case SPROM_DEFAULT: -- memcpy(&bcm63xx_sprom, &bcm63xx_default_sprom, -- sizeof(bcm63xx_sprom)); -+ memcpy(&fallback_sprom.sprom, &bcm63xx_default_sprom, -+ sizeof(bcm63xx_default_sprom)); - break; - default: - return -EINVAL; -@@ -973,12 +991,15 @@ int __init bcm63xx_register_fallback_spr - sprom_apply_fixups(template_sprom, data->board_fixups, - data->num_board_fixups); - -- sprom_extract(&bcm63xx_sprom, template_sprom, size); -+ sprom_extract(&fallback_sprom.sprom, template_sprom, size); - } - -- memcpy(bcm63xx_sprom.il0mac, data->mac_addr, ETH_ALEN); -- memcpy(bcm63xx_sprom.et0mac, data->mac_addr, ETH_ALEN); -- memcpy(bcm63xx_sprom.et1mac, data->mac_addr, ETH_ALEN); -+ memcpy(fallback_sprom.sprom.il0mac, data->mac_addr, ETH_ALEN); -+ memcpy(fallback_sprom.sprom.et0mac, data->mac_addr, ETH_ALEN); -+ memcpy(fallback_sprom.sprom.et1mac, data->mac_addr, ETH_ALEN); -+ -+ fallback_sprom.pci_bus = data->pci_bus; -+ fallback_sprom.pci_dev = data->pci_dev; - #endif /* defined(CONFIG_SSB_PCIHOST) || defined(CONFIG_BCMA_HOST_PCI) */ - - #if defined(CONFIG_SSB_PCIHOST) ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h -@@ -30,6 +30,9 @@ struct fallback_sprom_data { - u8 mac_addr[ETH_ALEN]; - enum sprom_type type; - -+ u8 pci_bus; -+ u8 pci_dev; -+ - struct sprom_fixup *board_fixups; - unsigned int num_board_fixups; - }; diff --git a/target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch b/target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch deleted file mode 100644 index a49181640c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch +++ /dev/null @@ -1,118 +0,0 @@ -From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 24 Jun 2014 10:57:51 +0200 -Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/Kconfig | 4 ++++ - arch/mips/bcm63xx/boards/board_common.c | 34 +++++++++++++++++++++++++++++++ - arch/mips/bcm63xx/prom.c | 6 ++++++ - 3 files changed, 44 insertions(+) - ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -2,6 +2,10 @@ - menu "Board support" - depends on BCM63XX - -+config BOARD_BCM63XX_DT -+ bool "Device Tree boards (experimential)" -+ select USE_OF -+ - config BOARD_BCM963XX - bool "Generic Broadcom 963xx boards" - select SSB ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -10,11 +10,14 @@ - #include - #include - #include -+#include -+#include - #include - #include - #include - #include - #include -+#include - #include - #include - #include -@@ -125,8 +128,23 @@ void __init board_setup(void) - /* make sure we're running on expected cpu */ - if (bcm63xx_get_cpu_id() != board.expected_cpu_id) - panic("unexpected CPU for bcm963xx board"); -+ -+#if CONFIG_OF -+ if (initial_boot_params) -+ __dt_setup_arch(initial_boot_params); -+#endif - } - -+#if CONFIG_OF -+void __init device_tree_init(void) -+{ -+ if (!initial_boot_params) -+ return; -+ -+ unflatten_and_copy_device_tree(); -+} -+#endif -+ - static struct gpio_led_platform_data bcm63xx_led_data; - - static struct platform_device bcm63xx_gpio_leds = { -@@ -135,6 +153,13 @@ static struct platform_device bcm63xx_gp - .dev.platform_data = &bcm63xx_led_data, - }; - -+#if CONFIG_OF -+static struct of_device_id of_ids[] = { -+ { /* filled at runtime */ }, -+ { .compatible = "simple-bus" }, -+ { }, -+}; -+#endif - /* - * third stage init callback, register all board devices. - */ -@@ -142,6 +167,15 @@ int __init board_register_devices(void) - { - int usbh_ports = 0; - -+#if CONFIG_OF -+ if (of_have_populated_dt()) { -+ snprintf(of_ids[0].compatible, sizeof(of_ids[0].compatible), -+ "brcm,bcm%x", bcm63xx_get_cpu_id()); -+ -+ of_platform_populate(NULL, of_ids, NULL, NULL); -+ } -+#endif -+ - if (board.has_uart0) - bcm63xx_uart_register(0); - ---- a/arch/mips/bcm63xx/prom.c -+++ b/arch/mips/bcm63xx/prom.c -@@ -8,6 +8,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -23,6 +24,11 @@ void __init prom_init(void) - { - u32 reg, mask; - -+#if CONFIG_OF -+ if (fw_passed_dtb) -+ early_init_dt_verify((void *)fw_passed_dtb); -+#endif -+ - bcm63xx_cpu_init(); - - /* stop any running watchdog */ diff --git a/target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch b/target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch deleted file mode 100644 index 7069c231de..0000000000 --- a/target/linux/bcm63xx/patches-4.14/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch +++ /dev/null @@ -1,95 +0,0 @@ -From 25bf2b5836c892f091651d8a3384c9c57ce1b400 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Thu, 26 Jun 2014 12:51:00 +0200 -Subject: [PATCH 46/48] MIPS: BCM63XX: add support for matching the board_info - by dtb - -Allow using the passed dtb's compatible property to match board_info -structs instead of nvram's boardname field, which is not unique anyway. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 15 +++++++++++++++ - arch/mips/bcm63xx/boards/board_common.c | 18 ++++++++++++++++++ - arch/mips/bcm63xx/boards/board_common.h | 3 +++ - 3 files changed, 36 insertions(+) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -695,6 +695,10 @@ static const struct board_info __initcon - #endif - }; - -+static struct of_device_id const bcm963xx_boards_dt[] = { -+ { }, -+}; -+ - /* - * early init callback, read nvram data from flash and checksum it - */ -@@ -706,6 +710,7 @@ void __init board_bcm963xx_init(void) - char *board_name = NULL; - u32 val; - struct bcm_hcs *hcs; -+ const struct of_device_id *board_match; - - /* read base address of boot chip select (0) - * 6328/6362 do not have MPI but boot from a fixed address -@@ -745,6 +750,16 @@ void __init board_bcm963xx_init(void) - } else { - board_name = bcm63xx_nvram_get_name(); - } -+ -+ /* find board by compat */ -+ board_match = bcm63xx_match_board(bcm963xx_boards_dt); -+ if (board_match) { -+ board_early_setup(board_match->data, -+ bcm63xx_nvram_get_mac_address); -+ -+ return; -+ } -+ - /* find board by name */ - for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { - if (strncmp(board_name, bcm963xx_boards[i]->name, 16)) ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -239,3 +239,21 @@ int __init board_register_devices(void) - - return 0; - } -+ -+const struct of_device_id * __init bcm63xx_match_board(const struct of_device_id *m) -+{ -+ const struct of_device_id *match; -+ unsigned long dt_root; -+ -+ if (!IS_ENABLED(CONFIG_OF) || !initial_boot_params) -+ return NULL; -+ -+ dt_root = of_get_flat_dt_root(); -+ -+ for (match = m; match->compatible[0]; match++) { -+ if (of_flat_dt_is_compatible(dt_root, match->compatible)) -+ return match; -+ } -+ -+ return NULL; -+} ---- a/arch/mips/bcm63xx/boards/board_common.h -+++ b/arch/mips/bcm63xx/boards/board_common.h -@@ -1,11 +1,14 @@ - #ifndef __BOARD_COMMON_H - #define __BOARD_COMMON_H - -+#include - #include - - void board_early_setup(const struct board_info *board, - int (*get_mac_address)(u8 mac[ETH_ALEN])); - -+const struct of_device_id *bcm63xx_match_board(const struct of_device_id *); -+ - #if defined(CONFIG_BOARD_BCM963XX) - void board_bcm963xx_init(void); - #else diff --git a/target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch b/target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch deleted file mode 100644 index 5dd4cbaeec..0000000000 --- a/target/linux/bcm63xx/patches-4.14/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch +++ /dev/null @@ -1,65 +0,0 @@ -From e71eea9953c774dfadb754258824fb1888c279f4 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 21 Nov 2014 16:54:06 +0100 -Subject: [PATCH 47/48] MIPS: BCM63XX: populate the compatible to board_info - list - -Populate the compatible to board_info list to allow dtbs to be used -for known boards. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 34 +++++++++++++++++++++++++++++ - 1 file changed, 34 insertions(+) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -696,6 +696,48 @@ static const struct board_info __initcon - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -+#ifdef CONFIG_OF -+#ifdef CONFIG_BCM63XX_CPU_3368 -+ { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6338 -+ { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, -+ { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6345 -+ { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6348 -+ { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, -+ { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, -+ { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, -+ { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, -+ { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, -+ { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, -+ { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, -+ { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, -+ { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, -+ { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6358 -+ { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, -+ { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, -+ { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, -+ { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, -+ { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, -+ { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, -+ { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, -+ { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, -+#endif -+#ifdef CONFIG_BCM63XX_CPU_6368 -+#endif -+#ifdef CONFIG_BCM63XX_CPU_63268 -+#endif -+#endif /* CONFIG_OF */ - { }, - }; - diff --git a/target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch b/target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch deleted file mode 100644 index 026eff3135..0000000000 --- a/target/linux/bcm63xx/patches-4.14/371_add_of_node_available_by_alias.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -143,6 +143,18 @@ void __init device_tree_init(void) - - unflatten_and_copy_device_tree(); - } -+ -+int board_of_device_present(const char *alias) -+{ -+ bool present; -+ struct device_node *np; -+ -+ np = of_find_node_by_path(alias); -+ present = of_device_is_available(np); -+ of_node_put(np); -+ -+ return present; -+} - #endif - - static struct gpio_led_platform_data bcm63xx_led_data; ---- a/arch/mips/bcm63xx/boards/board_common.h -+++ b/arch/mips/bcm63xx/boards/board_common.h -@@ -15,4 +15,13 @@ void board_bcm963xx_init(void); - static inline void board_bcm963xx_init(void) { } - #endif - -+#if defined(CONFIG_OF) -+int board_of_device_present(const char *alias); -+#else -+static inline void board_of_device_present(const char *alias) -+{ -+ return 0; -+} -+#endif -+ - #endif /* __BOARD_COMMON_H */ diff --git a/target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch b/target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch deleted file mode 100644 index 25384ebb68..0000000000 --- a/target/linux/bcm63xx/patches-4.14/372_dont_register_pflash_when_available_in_dtb.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -23,6 +23,8 @@ - #include - #include - -+#include "boards/board_common.h" -+ - static int flash_type; - - static struct mtd_partition mtd_partitions[] = { -@@ -178,6 +180,9 @@ int __init bcm63xx_flash_register(void) - - switch (flash_type) { - case BCM63XX_FLASH_TYPE_PARALLEL: -+ /* don't register when already registered through from dtb */ -+ if (board_of_device_present("pflash")) -+ return 0; - - if (!mtd_resources[0].start) { - /* read base address of boot chip select (0) */ diff --git a/target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch b/target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch deleted file mode 100644 index c5041a923e..0000000000 --- a/target/linux/bcm63xx/patches-4.14/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 8a0803979163c647736cb234ee1620c049c4915c Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Mon, 1 Dec 2014 00:20:07 +0100 -Subject: [PATCH 5/5] MIPS: BCM63XX: register interrupt controllers through DT - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/irq.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/arch/mips/bcm63xx/irq.c -+++ b/arch/mips/bcm63xx/irq.c -@@ -14,6 +14,8 @@ - #include - #include - #include -+#include -+#include - #include - #include - #include -@@ -21,6 +23,9 @@ - #include - #include - -+IRQCHIP_DECLARE(mips_cpu_intc, "mti,cpu-interrupt-controller", -+ mips_cpu_irq_of_init); -+ - void __init arch_init_irq(void) - { - void __iomem *periph_bases[2]; -@@ -29,6 +34,13 @@ void __init arch_init_irq(void) - int periph_irqs[2] = { 2, 3 }; - int ext_irqs[6]; - -+#ifdef CONFIG_OF -+ if (initial_boot_params) { -+ irqchip_init(); -+ return; -+ } -+#endif -+ - periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF); - periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF); - ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF); diff --git a/target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch deleted file mode 100644 index e0fa4398d6..0000000000 --- a/target/linux/bcm63xx/patches-4.14/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch +++ /dev/null @@ -1,178 +0,0 @@ -From dbe94a8daaa63ef81b7414f2a17bca8e36dd6daa Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 20 Feb 2015 19:55:32 +0100 -Subject: [PATCH 1/6] gpio: add a simple GPIO driver for bcm63xx - - -Signed-off-by: Jonas Gorski ---- - drivers/gpio/Kconfig | 8 +++ - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-bcm63xx.c | 135 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 131 insertions(+) - create mode 100644 drivers/gpio/gpio-bcm63xx.c - ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -134,6 +134,13 @@ config GPIO_BCM_KONA - help - Turn on GPIO support for Broadcom "Kona" chips. - -+config GPIO_BCM63XX -+ bool "Broadcom BCM63XX GPIO" -+ depends on MIPS || COMPILE_TEST -+ select GPIO_GENERIC -+ help -+ Turn on GPIO support for Broadcom BCM63XX xDSL chips. -+ - config GPIO_BRCMSTB - tristate "BRCMSTB GPIO support" - default y if (ARCH_BRCMSTB || BMIPS_GENERIC) ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o - obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o - obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o - obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o -+obj-$(CONFIG_GPIO_BCM63XX) += gpio-bcm63xx.o - obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o - obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o - obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o ---- /dev/null -+++ b/drivers/gpio/gpio-bcm63xx.c -@@ -0,0 +1,135 @@ -+/* -+ * Driver for BCM63XX memory-mapped GPIO controllers, based on -+ * Generic driver for memory-mapped GPIO controllers. -+ * -+ * Copyright 2008 MontaVista Software, Inc. -+ * Copyright 2008,2010 Anton Vorontsov -+ * Copyright 2015 Jonas Gorski -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static int bcm63xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ char irq_name[7]; /* "gpioXX" */ -+ -+ sprintf(irq_name, "gpio%d", gpio); -+ return of_irq_get_byname(chip->of_node, irq_name); -+} -+ -+static int bcm63xx_gpio_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *dat_r, *dirout_r; -+ void __iomem *dat; -+ void __iomem *dirout; -+ unsigned long sz; -+ int err; -+ struct gpio_chip *gc; -+ struct bgpio_pdata *pdata = dev_get_platdata(dev); -+ -+ dirout_r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ dat_r = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ if (!dat_r || !dirout_r) -+ return -EINVAL; -+ -+ if (resource_size(dat_r) != resource_size(dirout_r)) -+ return -EINVAL; -+ -+ sz = resource_size(dat_r); -+ -+ dat = devm_ioremap_resource(dev, dat_r); -+ if (IS_ERR(dat)) -+ return PTR_ERR(dat); -+ -+ dirout = devm_ioremap_resource(dev, dirout_r); -+ if (IS_ERR(dirout)) -+ return PTR_ERR(dirout); -+ -+ gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL); -+ if (!gc) -+ return -ENOMEM; -+ -+ err = bgpio_init(gc, dev, sz, dat, NULL, NULL, dirout, NULL, -+ BGPIOF_BIG_ENDIAN_BYTE_ORDER); -+ if (err) -+ return err; -+ -+ platform_set_drvdata(pdev, gc); -+ -+ if (dev->of_node) { -+ int id = of_alias_get_id(dev->of_node, "gpio"); -+ u32 ngpios; -+ -+ if (id >= 0) -+ gc->label = devm_kasprintf(dev, GFP_KERNEL, -+ "bcm63xx-gpio.%d", id); -+ -+ if (!of_property_read_u32(dev->of_node, "ngpios", &ngpios)) -+ gc->ngpio = ngpios; -+ -+ if (of_get_property(dev->of_node, "interrupt-names", NULL)) -+ gc->to_irq = bcm63xx_gpio_to_irq; -+ -+ } else if (pdata) { -+ gc->base = pdata->base; -+ if (pdata->ngpio > 0) -+ gc->ngpio = pdata->ngpio; -+ } -+ -+ return gpiochip_add(gc); -+} -+ -+static int bcm63xx_gpio_remove(struct platform_device *pdev) -+{ -+ struct gpio_chip *gc = platform_get_drvdata(pdev); -+ -+ gpiochip_remove(gc); -+ return 0; -+} -+ -+#ifdef CONFIG_OF -+static struct of_device_id bcm63xx_gpio_of_match[] = { -+ { .compatible = "brcm,bcm6345-gpio" }, -+ { }, -+}; -+#endif -+ -+static struct platform_driver bcm63xx_gpio_driver = { -+ .probe = bcm63xx_gpio_probe, -+ .remove = bcm63xx_gpio_remove, -+ .driver = { -+ .name = "bcm63xx-gpio", -+ .of_match_table = of_match_ptr(bcm63xx_gpio_of_match), -+ }, -+}; -+ -+module_platform_driver(bcm63xx_gpio_driver); -+ -+MODULE_DESCRIPTION("Driver for BCM63XX memory-mapped GPIO controllers"); -+MODULE_AUTHOR("Jonas Gorski "); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch b/target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch deleted file mode 100644 index fe56da083d..0000000000 --- a/target/linux/bcm63xx/patches-4.14/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch +++ /dev/null @@ -1,215 +0,0 @@ -From 302f69453721e5ee19f583339a3a646821d4a173 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 20 Feb 2015 23:58:54 +0100 -Subject: [PATCH 2/6] MIPS: BCM63XX: switch to new gpio driver - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_common.c | 2 + - arch/mips/bcm63xx/gpio.c | 145 ++++++++++------------------------------------ - arch/mips/bcm63xx/setup.c | 3 - - 3 files changed, 32 insertions(+), 118 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -188,6 +188,8 @@ int __init board_register_devices(void) - } - #endif - -+ bcm63xx_gpio_init(); -+ - if (board.has_uart0) - bcm63xx_uart_register(0); - ---- a/arch/mips/bcm63xx/gpio.c -+++ b/arch/mips/bcm63xx/gpio.c -@@ -5,147 +5,62 @@ - * - * Copyright (C) 2008 Maxime Bizon - * Copyright (C) 2008-2011 Florian Fainelli -+ * Copyright (C) Jonas Gorski - */ - - #include - #include --#include - #include - #include - - #include - #include --#include - #include - --static u32 gpio_out_low_reg; -- --static void bcm63xx_gpio_out_low_reg_init(void) -+static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio) - { -- switch (bcm63xx_get_cpu_id()) { -- case BCM6345_CPU_ID: -- gpio_out_low_reg = GPIO_DATA_LO_REG_6345; -- break; -- default: -- gpio_out_low_reg = GPIO_DATA_LO_REG; -- break; -- } --} -- --static DEFINE_SPINLOCK(bcm63xx_gpio_lock); --static u32 gpio_out_low, gpio_out_high; -+ struct resource res[2]; -+ struct bgpio_pdata pdata; - --static void bcm63xx_gpio_set(struct gpio_chip *chip, -- unsigned gpio, int val) --{ -- u32 reg; -- u32 mask; -- u32 *v; -- unsigned long flags; -- -- if (gpio >= chip->ngpio) -- BUG(); -- -- if (gpio < 32) { -- reg = gpio_out_low_reg; -- mask = 1 << gpio; -- v = &gpio_out_low; -- } else { -- reg = GPIO_DATA_HI_REG; -- mask = 1 << (gpio - 32); -- v = &gpio_out_high; -- } -- -- spin_lock_irqsave(&bcm63xx_gpio_lock, flags); -- if (val) -- *v |= mask; -- else -- *v &= ~mask; -- bcm_gpio_writel(*v, reg); -- spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); --} -+ memset(res, 0, sizeof(res)); -+ memset(&pdata, 0, sizeof(pdata)); - --static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio) --{ -- u32 reg; -- u32 mask; -+ res[0].flags = IORESOURCE_MEM; -+ res[0].start = bcm63xx_regset_address(RSET_GPIO); -+ res[0].start += dir; - -- if (gpio >= chip->ngpio) -- BUG(); -+ res[0].end = res[0].start + 3; - -- if (gpio < 32) { -- reg = gpio_out_low_reg; -- mask = 1 << gpio; -- } else { -- reg = GPIO_DATA_HI_REG; -- mask = 1 << (gpio - 32); -- } -+ res[1].flags = IORESOURCE_MEM; -+ res[1].start = bcm63xx_regset_address(RSET_GPIO); -+ res[1].start += data; - -- return !!(bcm_gpio_readl(reg) & mask); --} -+ res[1].end = res[1].start + 3; - --static int bcm63xx_gpio_set_direction(struct gpio_chip *chip, -- unsigned gpio, int dir) --{ -- u32 reg; -- u32 mask; -- u32 tmp; -- unsigned long flags; -- -- if (gpio >= chip->ngpio) -- BUG(); -- -- if (gpio < 32) { -- reg = GPIO_CTL_LO_REG; -- mask = 1 << gpio; -- } else { -- reg = GPIO_CTL_HI_REG; -- mask = 1 << (gpio - 32); -- } -- -- spin_lock_irqsave(&bcm63xx_gpio_lock, flags); -- tmp = bcm_gpio_readl(reg); -- if (dir == BCM63XX_GPIO_DIR_IN) -- tmp &= ~mask; -- else -- tmp |= mask; -- bcm_gpio_writel(tmp, reg); -- spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); -+ pdata.base = id * 32; -+ pdata.ngpio = ngpio; - -- return 0; -+ platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2, -+ &pdata, sizeof(pdata)); - } - --static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -+int __init bcm63xx_gpio_init(void) - { -- return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN); --} -+ int ngpio = bcm63xx_gpio_count(); -+ int data_low_reg; - --static int bcm63xx_gpio_direction_output(struct gpio_chip *chip, -- unsigned gpio, int value) --{ -- bcm63xx_gpio_set(chip, gpio, value); -- return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT); --} -+ if (BCMCPU_IS_6345()) -+ data_low_reg = GPIO_DATA_LO_REG_6345; -+ else -+ data_low_reg = GPIO_DATA_LO_REG; - -+ bcm63xx_gpio_init_one(0, GPIO_CTL_LO_REG, data_low_reg, min(ngpio, 32)); - --static struct gpio_chip bcm63xx_gpio_chip = { -- .label = "bcm63xx-gpio", -- .direction_input = bcm63xx_gpio_direction_input, -- .direction_output = bcm63xx_gpio_direction_output, -- .get = bcm63xx_gpio_get, -- .set = bcm63xx_gpio_set, -- .base = 0, --}; -+ if (ngpio <= 32) -+ return 0; - --int __init bcm63xx_gpio_init(void) --{ -- bcm63xx_gpio_out_low_reg_init(); -+ bcm63xx_gpio_init_one(1, GPIO_CTL_HI_REG, GPIO_DATA_HI_REG, ngpio - 32); - -- gpio_out_low = bcm_gpio_readl(gpio_out_low_reg); -- if (!BCMCPU_IS_6345()) -- gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG); -- bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count(); -- pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio); -+ return 0; - -- return gpiochip_add_data(&bcm63xx_gpio_chip, NULL); - } ---- a/arch/mips/bcm63xx/setup.c -+++ b/arch/mips/bcm63xx/setup.c -@@ -164,9 +164,6 @@ void __init plat_mem_setup(void) - - int __init bcm63xx_register_devices(void) - { -- /* register gpiochip */ -- bcm63xx_gpio_init(); -- - return board_register_devices(); - } - diff --git a/target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch deleted file mode 100644 index c061ec4e60..0000000000 --- a/target/linux/bcm63xx/patches-4.14/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch +++ /dev/null @@ -1,129 +0,0 @@ -From d13bdf92ec885105cf107183f8464c40e5f3b93b Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 21 Feb 2015 17:21:59 +0100 -Subject: [PATCH 4/6] MIPS: BCM63XX: register lookup for ephy-reset gpio - - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +- - arch/mips/bcm63xx/boards/board_common.c | 7 +++-- - arch/mips/bcm63xx/gpio.c | 32 ++++++++++++++++++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 2 ++ - .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 5 +-- - 5 files changed, 42 insertions(+), 6 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -55,7 +55,7 @@ static struct board_info __initdata boar - }, - - .ephy_reset_gpio = 36, -- .ephy_reset_gpio_flags = GPIOF_INIT_HIGH, -+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, - }; - #endif - ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -247,9 +247,10 @@ int __init board_register_devices(void) - - platform_device_register(&bcm63xx_gpio_leds); - -- if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) -- gpio_request_one(board.ephy_reset_gpio, -- board.ephy_reset_gpio_flags, "ephy-reset"); -+ if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags) { -+ bcm63xx_gpio_ephy_reset(board.ephy_reset_gpio, -+ board.ephy_reset_gpio_flags); -+ } - - return 0; - } ---- a/arch/mips/bcm63xx/gpio.c -+++ b/arch/mips/bcm63xx/gpio.c -@@ -8,15 +8,23 @@ - * Copyright (C) Jonas Gorski - */ - -+#include -+ - #include - #include - #include - #include -+#include - - #include - #include - #include - -+static const char * const gpio_chip_labels[] = { -+ "bcm63xx-gpio.0", -+ "bcm63xx-gpio.1", -+}; -+ - static void __init bcm63xx_gpio_init_one(int id, int dir, int data, int ngpio) - { - struct resource res[2]; -@@ -64,3 +72,25 @@ int __init bcm63xx_gpio_init(void) - return 0; - - } -+ -+static struct gpiod_lookup_table ephy_reset = { -+ .dev_id = "bcm63xx_enet-0", -+ .table = { -+ { /* filled at runtime */ }, -+ { }, -+ }, -+}; -+ -+ -+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags) -+{ -+ if (ephy_reset.table[0].chip_label) -+ return; -+ -+ ephy_reset.table[0].chip_label = gpio_chip_labels[hw_gpio / 32]; -+ ephy_reset.table[0].chip_hwnum = hw_gpio % 32; -+ ephy_reset.table[0].con_id = "reset"; -+ ephy_reset.table[0].flags = flags; -+ -+ gpiod_add_lookup_table(&ephy_reset); -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h -@@ -3,9 +3,11 @@ - #define BCM63XX_GPIO_H - - #include -+#include - #include - - int __init bcm63xx_gpio_init(void); -+void bcm63xx_gpio_ephy_reset(int hw_gpio, enum gpio_lookup_flags flags); - - static inline unsigned long bcm63xx_gpio_count(void) - { ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -4,6 +4,7 @@ - - #include - #include -+#include - #include - #include - #include -@@ -50,8 +51,8 @@ struct board_info { - /* External PHY reset GPIO */ - unsigned int ephy_reset_gpio; - -- /* External PHY reset GPIO flags from gpio.h */ -- unsigned long ephy_reset_gpio_flags; -+ /* External PHY reset GPIO flags from gpio/machine.h */ -+ enum gpio_lookup_flags ephy_reset_gpio_flags; - - /* fallback sprom config */ - struct fallback_sprom_data fallback_sprom; diff --git a/target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch b/target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch deleted file mode 100644 index 6eb1bd0284..0000000000 --- a/target/linux/bcm63xx/patches-4.14/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch +++ /dev/null @@ -1,35 +0,0 @@ -From e55892aac9d5508a000647ca66f0e678e02be3bb Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 21 Feb 2015 17:26:50 +0100 -Subject: [PATCH 5/6] MIPS: BCM63XX: do not register gpio-controller if -present in dtb - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/gpio.c | 7 +++++-- - 1 file changed, 5 insertions(+), 2 deletions(-) - ---- a/arch/mips/bcm63xx/gpio.c -+++ b/arch/mips/bcm63xx/gpio.c -@@ -20,6 +20,8 @@ - #include - #include - -+#include "boards/board_common.h" -+ - static const char * const gpio_chip_labels[] = { - "bcm63xx-gpio.0", - "bcm63xx-gpio.1", -@@ -48,8 +50,10 @@ static void __init bcm63xx_gpio_init_one - pdata.base = id * 32; - pdata.ngpio = ngpio; - -- platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, 2, -- &pdata, sizeof(pdata)); -+ if (!board_of_device_present("gpio0") && -+ !board_of_device_present("pinctrl")) -+ platform_device_register_resndata(NULL, "bcm63xx-gpio", id, res, -+ 2, &pdata, sizeof(pdata)); - } - - int __init bcm63xx_gpio_init(void) diff --git a/target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch b/target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch deleted file mode 100644 index b5719990bd..0000000000 --- a/target/linux/bcm63xx/patches-4.14/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 1647cccc871bf43876c3df9852869680880d054c Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 25 Mar 2015 13:52:02 +0100 -Subject: [PATCH 1/2] MIPS: BCM63XX: provide a gpio lookup for the pcmcia - ready gpio - -To prepare for a time when gpiobases don't need to be fixed anymore. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/dev-pcmcia.c | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - ---- a/arch/mips/bcm63xx/dev-pcmcia.c -+++ b/arch/mips/bcm63xx/dev-pcmcia.c -@@ -10,6 +10,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -101,6 +102,14 @@ static const struct { - }, - }; - -+static struct gpiod_lookup_table pcmcia_gpios_table = { -+ .dev_id = "bcm63xx_pcmcia.0", -+ .table = { -+ GPIO_LOOKUP("bcm63xx-gpio.0", 0, "ready", GPIO_ACTIVE_HIGH), -+ { }, -+ }, -+}; -+ - int __init bcm63xx_pcmcia_register(void) - { - int ret, i; -@@ -112,16 +121,20 @@ int __init bcm63xx_pcmcia_register(void) - switch (bcm63xx_get_cpu_id()) { - case BCM6348_CPU_ID: - pd.ready_gpio = 22; -+ pcmcia_gpios_table.table[0].chip_hwnum = 22; - break; - - case BCM6358_CPU_ID: - pd.ready_gpio = 18; -+ pcmcia_gpios_table.table[0].chip_hwnum = 18; - break; - - default: - return -ENODEV; - } - -+ gpiod_add_lookup_table(&pcmcia_gpios_table); -+ - pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA); - pcmcia_resources[0].end = pcmcia_resources[0].start + - RSET_PCMCIA_SIZE - 1; diff --git a/target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch b/target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch deleted file mode 100644 index 253417153c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch +++ /dev/null @@ -1,59 +0,0 @@ -From c4e04f1c54928a49b227a5420d38b18226838775 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 25 Mar 2015 13:54:56 +0100 -Subject: [PATCH 2/2] pcmcia: bcm63xx_pmcia: use the new named gpio - -Use the new named gpio instead of relying on the hardware gpio numbers -matching the virtual gpio numbers. - -Signed-off-by: Jonas Gorski ---- - drivers/pcmcia/bcm63xx_pcmcia.c | 9 ++++++++- - drivers/pcmcia/bcm63xx_pcmcia.h | 4 ++++ - 2 files changed, 12 insertions(+), 1 deletion(-) - ---- a/drivers/pcmcia/bcm63xx_pcmcia.c -+++ b/drivers/pcmcia/bcm63xx_pcmcia.c -@@ -237,7 +237,7 @@ static unsigned int __get_socket_status( - stat |= SS_XVCARD; - stat |= SS_POWERON; - -- if (gpio_get_value(skt->pd->ready_gpio)) -+ if (gpiod_get_value(skt->ready_gpio)) - stat |= SS_READY; - - return stat; -@@ -373,6 +373,13 @@ static int bcm63xx_drv_pcmcia_probe(stru - goto err; - } - -+ /* get ready gpio */ -+ skt->ready_gpio = devm_gpiod_get(&pdev->dev, "ready", GPIOD_IN); -+ if (IS_ERR(skt->ready_gpio)) { -+ ret = PTR_ERR(skt->ready_gpio); -+ goto err; -+ } -+ - /* resources are static */ - sock->resource_ops = &pccard_static_ops; - sock->ops = &bcm63xx_pcmcia_operations; ---- a/drivers/pcmcia/bcm63xx_pcmcia.h -+++ b/drivers/pcmcia/bcm63xx_pcmcia.h -@@ -4,6 +4,7 @@ - - #include - #include -+#include - #include - #include - -@@ -56,6 +57,9 @@ struct bcm63xx_pcmcia_socket { - - /* base address of io memory */ - void __iomem *io_base; -+ -+ /* ready gpio */ -+ struct gpio_desc *ready_gpio; - }; - - #endif /* BCM63XX_PCMCIA_H_ */ diff --git a/target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch b/target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch deleted file mode 100644 index 5d4265f7fe..0000000000 --- a/target/linux/bcm63xx/patches-4.14/381-Documentation-add-BCM6318-pincontroller-binding-docu.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 8439e5d2e69f54a532bb5f8ec001b4b5a3035574 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Wed, 27 Jul 2016 11:38:05 +0200 -Subject: [PATCH 14/16] Documentation: add BCM6318 pincontroller binding - documentation - -Add binding documentation for the pincontrol core found in BCM6318 SoCs. - -Signed-off-by: Jonas Gorski ---- - .../bindings/pinctrl/brcm,bcm6318-pinctrl.txt | 79 ++++++++++++++++++++++ - 1 file changed, 79 insertions(+) - create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.txt -@@ -0,0 +1,79 @@ -+* Broadcom BCM6318 pin controller -+ -+Required properties: -+- compatible: Must be "brcm,bcm6318-pinctrl". -+- regs: Register specifiers of dirout, dat, mode, mux, and pad registers. -+- reg-names: Must be "dirout", "dat", "mode", "mux", "pad". -+- gpio-controller: Identifies this node as a gpio controller. -+- #gpio-cells: Must be <2>. -+ -+Example: -+ -+pinctrl: pin-controller@10000080 { -+ compatible = "brcm,bcm6318-pinctrl"; -+ reg = <0x10000080 0x08>, -+ <0x10000088 0x08>, -+ <0x10000098 0x04>, -+ <0x1000009c 0x0c>, -+ <0x100000d4 0x18>; -+ reg-names = "dirout", "dat", "mode", "mux", "pad"; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+}; -+ -+ -+Available pins/groups and functions: -+ -+name pins functions -+----------------------------------------------------------- -+gpio0 0 led, ephy0_spd_led -+gpio1 1 led, ephy1_spd_led -+gpio2 2 led, ephy2_spd_led -+gpio3 3 led, ephy3_spd_led -+gpio4 4 led, ephy0_act_led -+gpio5 5 led, ephy1_act_led -+gpio6 6 led, ephy2_act_led, serial_led_data -+gpio7 7 led, ephy3_act_led, serial_led_clk -+gpio8 8 led, inet_act_led -+gpio9 9 led, inet_fail_led -+gpio10 10 led, dsl_led -+gpio11 11 led, post_fail_led -+gpio12 12 led, wlan_wps_led -+gpio13 13 led, usb_pwron, usb_device_led -+gpio14 14 led -+gpio15 15 led -+gpio16 16 led -+gpio17 17 led -+gpio18 18 led -+gpio19 19 led -+gpio20 20 led -+gpio21 21 led -+gpio22 22 led -+gpio23 23 led -+gpio24 24 - -+gpio25 25 - -+gpio26 26 - -+gpio27 27 - -+gpio28 28 - -+gpio29 29 - -+gpio30 30 - -+gpio31 31 - -+gpio32 32 - -+gpio33 33 - -+gpio34 34 - -+gpio35 35 - -+gpio36 36 - -+gpio37 37 - -+gpio38 38 - -+gpio39 39 - -+gpio40 40 usb_active -+gpio41 41 - -+gpio42 42 - -+gpio43 43 - -+gpio44 44 - -+gpio45 45 - -+gpio46 46 - -+gpio47 47 - -+gpio48 48 - -+gpio49 49 - diff --git a/target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch b/target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch deleted file mode 100644 index 2a89dde3c3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/382-pinctrl-add-a-pincontrol-driver-for-BCM6318.patch +++ /dev/null @@ -1,609 +0,0 @@ -From bd9c250ef85e6f99aa5d59b21abb87d0a48f2f61 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 24 Jun 2016 22:20:39 +0200 -Subject: [PATCH 15/16] pinctrl: add a pincontrol driver for BCM6318 - -Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOs -to different functions. BCM6318 is similar to BCM6328 with the addition -of a pad register, and the GPIO meaning of the mux register changes -based on the GPIO number. - -Signed-off-by: Jonas Gorski ---- - drivers/pinctrl/bcm63xx/Kconfig | 7 + - drivers/pinctrl/bcm63xx/Makefile | 1 + - drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c | 564 ++++++++++++++++++++++++++++++ - 3 files changed, 572 insertions(+) - create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c - ---- a/drivers/pinctrl/bcm63xx/Kconfig -+++ b/drivers/pinctrl/bcm63xx/Kconfig -@@ -2,6 +2,13 @@ config PINCTRL_BCM63XX - bool - select GPIO_GENERIC - -+config PINCTRL_BCM6318 -+ bool "BCM6318 pincontrol driver" if COMPILE_TEST -+ select PINMUX -+ select PINCONF -+ select PINCTRL_BCM63XX -+ select GENERIC_PINCONF -+ - config PINCTRL_BCM6328 - bool "BCM6328 pincontrol driver" if COMPILE_TEST - select PINMUX ---- a/drivers/pinctrl/bcm63xx/Makefile -+++ b/drivers/pinctrl/bcm63xx/Makefile -@@ -1,4 +1,5 @@ - obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o -+obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o - obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o - obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o - obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o ---- /dev/null -+++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6318.c -@@ -0,0 +1,564 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2016 Jonas Gorski -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core.h" -+#include "../pinctrl-utils.h" -+ -+#include "pinctrl-bcm63xx.h" -+ -+#define BCM6318_NGPIO 50 -+ -+struct bcm6318_pingroup { -+ const char *name; -+ const unsigned * const pins; -+ const unsigned num_pins; -+}; -+ -+struct bcm6318_function { -+ const char *name; -+ const char * const *groups; -+ const unsigned num_groups; -+ -+ unsigned mode_val:1; -+ unsigned mux_val:2; -+}; -+ -+struct bcm6318_pinctrl { -+ struct pinctrl_dev *pctldev; -+ struct pinctrl_desc desc; -+ -+ void __iomem *mode; -+ void __iomem *mux[3]; -+ void __iomem *pad[6]; -+ -+ /* register access lock */ -+ spinlock_t lock; -+ -+ struct gpio_chip gpio[2]; -+}; -+ -+static const struct pinctrl_pin_desc bcm6318_pins[] = { -+ PINCTRL_PIN(0, "gpio0"), -+ PINCTRL_PIN(1, "gpio1"), -+ PINCTRL_PIN(2, "gpio2"), -+ PINCTRL_PIN(3, "gpio3"), -+ PINCTRL_PIN(4, "gpio4"), -+ PINCTRL_PIN(5, "gpio5"), -+ PINCTRL_PIN(6, "gpio6"), -+ PINCTRL_PIN(7, "gpio7"), -+ PINCTRL_PIN(8, "gpio8"), -+ PINCTRL_PIN(9, "gpio9"), -+ PINCTRL_PIN(10, "gpio10"), -+ PINCTRL_PIN(11, "gpio11"), -+ PINCTRL_PIN(12, "gpio12"), -+ PINCTRL_PIN(13, "gpio13"), -+ PINCTRL_PIN(14, "gpio14"), -+ PINCTRL_PIN(15, "gpio15"), -+ PINCTRL_PIN(16, "gpio16"), -+ PINCTRL_PIN(17, "gpio17"), -+ PINCTRL_PIN(18, "gpio18"), -+ PINCTRL_PIN(19, "gpio19"), -+ PINCTRL_PIN(20, "gpio20"), -+ PINCTRL_PIN(21, "gpio21"), -+ PINCTRL_PIN(22, "gpio22"), -+ PINCTRL_PIN(23, "gpio23"), -+ PINCTRL_PIN(24, "gpio24"), -+ PINCTRL_PIN(25, "gpio25"), -+ PINCTRL_PIN(26, "gpio26"), -+ PINCTRL_PIN(27, "gpio27"), -+ PINCTRL_PIN(28, "gpio28"), -+ PINCTRL_PIN(29, "gpio29"), -+ PINCTRL_PIN(30, "gpio30"), -+ PINCTRL_PIN(31, "gpio31"), -+ PINCTRL_PIN(32, "gpio32"), -+ PINCTRL_PIN(33, "gpio33"), -+ PINCTRL_PIN(34, "gpio34"), -+ PINCTRL_PIN(35, "gpio35"), -+ PINCTRL_PIN(36, "gpio36"), -+ PINCTRL_PIN(37, "gpio37"), -+ PINCTRL_PIN(38, "gpio38"), -+ PINCTRL_PIN(39, "gpio39"), -+ PINCTRL_PIN(40, "gpio40"), -+ PINCTRL_PIN(41, "gpio41"), -+ PINCTRL_PIN(42, "gpio42"), -+ PINCTRL_PIN(43, "gpio43"), -+ PINCTRL_PIN(44, "gpio44"), -+ PINCTRL_PIN(45, "gpio45"), -+ PINCTRL_PIN(46, "gpio46"), -+ PINCTRL_PIN(47, "gpio47"), -+ PINCTRL_PIN(48, "gpio48"), -+ PINCTRL_PIN(49, "gpio49"), -+}; -+ -+static unsigned gpio0_pins[] = { 0 }; -+static unsigned gpio1_pins[] = { 1 }; -+static unsigned gpio2_pins[] = { 2 }; -+static unsigned gpio3_pins[] = { 3 }; -+static unsigned gpio4_pins[] = { 4 }; -+static unsigned gpio5_pins[] = { 5 }; -+static unsigned gpio6_pins[] = { 6 }; -+static unsigned gpio7_pins[] = { 7 }; -+static unsigned gpio8_pins[] = { 8 }; -+static unsigned gpio9_pins[] = { 9 }; -+static unsigned gpio10_pins[] = { 10 }; -+static unsigned gpio11_pins[] = { 11 }; -+static unsigned gpio12_pins[] = { 12 }; -+static unsigned gpio13_pins[] = { 13 }; -+static unsigned gpio14_pins[] = { 14 }; -+static unsigned gpio15_pins[] = { 15 }; -+static unsigned gpio16_pins[] = { 16 }; -+static unsigned gpio17_pins[] = { 17 }; -+static unsigned gpio18_pins[] = { 18 }; -+static unsigned gpio19_pins[] = { 19 }; -+static unsigned gpio20_pins[] = { 20 }; -+static unsigned gpio21_pins[] = { 21 }; -+static unsigned gpio22_pins[] = { 22 }; -+static unsigned gpio23_pins[] = { 23 }; -+static unsigned gpio24_pins[] = { 24 }; -+static unsigned gpio25_pins[] = { 25 }; -+static unsigned gpio26_pins[] = { 26 }; -+static unsigned gpio27_pins[] = { 27 }; -+static unsigned gpio28_pins[] = { 28 }; -+static unsigned gpio29_pins[] = { 29 }; -+static unsigned gpio30_pins[] = { 30 }; -+static unsigned gpio31_pins[] = { 31 }; -+static unsigned gpio32_pins[] = { 32 }; -+static unsigned gpio33_pins[] = { 33 }; -+static unsigned gpio34_pins[] = { 34 }; -+static unsigned gpio35_pins[] = { 35 }; -+static unsigned gpio36_pins[] = { 36 }; -+static unsigned gpio37_pins[] = { 37 }; -+static unsigned gpio38_pins[] = { 38 }; -+static unsigned gpio39_pins[] = { 39 }; -+static unsigned gpio40_pins[] = { 40 }; -+static unsigned gpio41_pins[] = { 41 }; -+static unsigned gpio42_pins[] = { 42 }; -+static unsigned gpio43_pins[] = { 43 }; -+static unsigned gpio44_pins[] = { 44 }; -+static unsigned gpio45_pins[] = { 45 }; -+static unsigned gpio46_pins[] = { 46 }; -+static unsigned gpio47_pins[] = { 47 }; -+static unsigned gpio48_pins[] = { 48 }; -+static unsigned gpio49_pins[] = { 49 }; -+ -+#define BCM6318_GROUP(n) \ -+ { \ -+ .name = #n, \ -+ .pins = n##_pins, \ -+ .num_pins = ARRAY_SIZE(n##_pins), \ -+ } -+ -+static struct bcm6318_pingroup bcm6318_groups[] = { -+ BCM6318_GROUP(gpio0), -+ BCM6318_GROUP(gpio1), -+ BCM6318_GROUP(gpio2), -+ BCM6318_GROUP(gpio3), -+ BCM6318_GROUP(gpio4), -+ BCM6318_GROUP(gpio5), -+ BCM6318_GROUP(gpio6), -+ BCM6318_GROUP(gpio7), -+ BCM6318_GROUP(gpio8), -+ BCM6318_GROUP(gpio9), -+ BCM6318_GROUP(gpio10), -+ BCM6318_GROUP(gpio11), -+ BCM6318_GROUP(gpio12), -+ BCM6318_GROUP(gpio13), -+ BCM6318_GROUP(gpio14), -+ BCM6318_GROUP(gpio15), -+ BCM6318_GROUP(gpio16), -+ BCM6318_GROUP(gpio17), -+ BCM6318_GROUP(gpio18), -+ BCM6318_GROUP(gpio19), -+ BCM6318_GROUP(gpio20), -+ BCM6318_GROUP(gpio21), -+ BCM6318_GROUP(gpio22), -+ BCM6318_GROUP(gpio23), -+ BCM6318_GROUP(gpio24), -+ BCM6318_GROUP(gpio25), -+ BCM6318_GROUP(gpio26), -+ BCM6318_GROUP(gpio27), -+ BCM6318_GROUP(gpio28), -+ BCM6318_GROUP(gpio29), -+ BCM6318_GROUP(gpio30), -+ BCM6318_GROUP(gpio31), -+ BCM6318_GROUP(gpio32), -+ BCM6318_GROUP(gpio33), -+ BCM6318_GROUP(gpio34), -+ BCM6318_GROUP(gpio35), -+ BCM6318_GROUP(gpio36), -+ BCM6318_GROUP(gpio37), -+ BCM6318_GROUP(gpio38), -+ BCM6318_GROUP(gpio39), -+ BCM6318_GROUP(gpio40), -+ BCM6318_GROUP(gpio41), -+ BCM6318_GROUP(gpio42), -+ BCM6318_GROUP(gpio43), -+ BCM6318_GROUP(gpio44), -+ BCM6318_GROUP(gpio45), -+ BCM6318_GROUP(gpio46), -+ BCM6318_GROUP(gpio47), -+ BCM6318_GROUP(gpio48), -+ BCM6318_GROUP(gpio49), -+}; -+ -+/* GPIO_MODE */ -+static const char * const led_groups[] = { -+ "gpio0", -+ "gpio1", -+ "gpio2", -+ "gpio3", -+ "gpio4", -+ "gpio5", -+ "gpio6", -+ "gpio7", -+ "gpio8", -+ "gpio9", -+ "gpio10", -+ "gpio11", -+ "gpio12", -+ "gpio13", -+ "gpio14", -+ "gpio15", -+ "gpio16", -+ "gpio17", -+ "gpio18", -+ "gpio19", -+ "gpio20", -+ "gpio21", -+ "gpio22", -+ "gpio23", -+}; -+ -+/* PINMUX_SEL */ -+static const char * const ephy0_spd_led_groups[] = { -+ "gpio0", -+}; -+ -+static const char * const ephy1_spd_led_groups[] = { -+ "gpio1", -+}; -+ -+static const char * const ephy2_spd_led_groups[] = { -+ "gpio2", -+}; -+ -+static const char * const ephy3_spd_led_groups[] = { -+ "gpio3", -+}; -+ -+static const char * const ephy0_act_led_groups[] = { -+ "gpio4", -+}; -+ -+static const char * const ephy1_act_led_groups[] = { -+ "gpio5", -+}; -+ -+static const char * const ephy2_act_led_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const ephy3_act_led_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const serial_led_data_groups[] = { -+ "gpio6", -+}; -+ -+static const char * const serial_led_clk_groups[] = { -+ "gpio7", -+}; -+ -+static const char * const inet_act_led_groups[] = { -+ "gpio8", -+}; -+ -+static const char * const inet_fail_led_groups[] = { -+ "gpio9", -+}; -+ -+static const char * const dsl_led_groups[] = { -+ "gpio10", -+}; -+ -+static const char * const post_fail_led_groups[] = { -+ "gpio11", -+}; -+ -+static const char * const wlan_wps_led_groups[] = { -+ "gpio12", -+}; -+ -+static const char * const usb_pwron_groups[] = { -+ "gpio13", -+}; -+ -+static const char * const usb_device_led_groups[] = { -+ "gpio13", -+}; -+ -+static const char * const usb_active_groups[] = { -+ "gpio40", -+}; -+ -+#define BCM6318_MODE_FUN(n) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .mode_val = 1, \ -+ } -+ -+#define BCM6318_MUX_FUN(n, mux) \ -+ { \ -+ .name = #n, \ -+ .groups = n##_groups, \ -+ .num_groups = ARRAY_SIZE(n##_groups), \ -+ .mux_val = mux, \ -+ } -+ -+static const struct bcm6318_function bcm6318_funcs[] = { -+ BCM6318_MODE_FUN(led), -+ BCM6318_MUX_FUN(ephy0_spd_led, 1), -+ BCM6318_MUX_FUN(ephy1_spd_led, 1), -+ BCM6318_MUX_FUN(ephy2_spd_led, 1), -+ BCM6318_MUX_FUN(ephy3_spd_led, 1), -+ BCM6318_MUX_FUN(ephy0_act_led, 1), -+ BCM6318_MUX_FUN(ephy1_act_led, 1), -+ BCM6318_MUX_FUN(ephy2_act_led, 1), -+ BCM6318_MUX_FUN(ephy3_act_led, 1), -+ BCM6318_MUX_FUN(serial_led_data, 3), -+ BCM6318_MUX_FUN(serial_led_clk, 3), -+ BCM6318_MUX_FUN(inet_act_led, 1), -+ BCM6318_MUX_FUN(inet_fail_led, 1), -+ BCM6318_MUX_FUN(dsl_led, 1), -+ BCM6318_MUX_FUN(post_fail_led, 1), -+ BCM6318_MUX_FUN(wlan_wps_led, 1), -+ BCM6318_MUX_FUN(usb_pwron, 1), -+ BCM6318_MUX_FUN(usb_device_led, 2), -+ BCM6318_MUX_FUN(usb_active, 2), -+}; -+ -+static int bcm6318_pinctrl_get_group_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6318_groups); -+} -+ -+static const char *bcm6318_pinctrl_get_group_name(struct pinctrl_dev *pctldev, -+ unsigned group) -+{ -+ return bcm6318_groups[group].name; -+} -+ -+static int bcm6318_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, -+ unsigned group, const unsigned **pins, -+ unsigned *num_pins) -+{ -+ *pins = bcm6318_groups[group].pins; -+ *num_pins = bcm6318_groups[group].num_pins; -+ -+ return 0; -+} -+ -+static int bcm6318_pinctrl_get_func_count(struct pinctrl_dev *pctldev) -+{ -+ return ARRAY_SIZE(bcm6318_funcs); -+} -+ -+static const char *bcm6318_pinctrl_get_func_name(struct pinctrl_dev *pctldev, -+ unsigned selector) -+{ -+ return bcm6318_funcs[selector].name; -+} -+ -+static int bcm6318_pinctrl_get_groups(struct pinctrl_dev *pctldev, -+ unsigned selector, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ *groups = bcm6318_funcs[selector].groups; -+ *num_groups = bcm6318_funcs[selector].num_groups; -+ -+ return 0; -+} -+ -+static void bcm6318_rmw_mux(struct bcm6318_pinctrl *pctl, unsigned pin, -+ u32 mode, u32 mux) -+{ -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ if (pin < 32) { -+ reg = __raw_readl(pctl->mode); -+ reg &= ~BIT(pin); -+ if (mode) -+ reg |= BIT(pin); -+ __raw_writel(reg, pctl->mode); -+ } -+ -+ if (pin < 48) { -+ reg = __raw_readl(pctl->mux[pin / 16]); -+ reg &= ~(3UL << ((pin % 16) * 2)); -+ reg |= mux << ((pin % 16) * 2); -+ __raw_writel(reg, pctl->mux[pin / 16]); -+ } -+ spin_unlock_irqrestore(&pctl->lock, flags); -+} -+ -+static void bcm6318_set_pad(struct bcm6318_pinctrl *pctl, unsigned pin, u8 val) -+{ -+ unsigned long flags; -+ u32 reg; -+ -+ spin_lock_irqsave(&pctl->lock, flags); -+ reg = __raw_readl(pctl->pad[pin / 8]); -+ reg &= ~(0xfUL << ((pin % 8) * 4)); -+ reg |= val << ((pin % 8) * 4); -+ __raw_writel(reg, pctl->pad[pin / 8]); -+ spin_unlock_irqrestore(&pctl->lock, flags); -+} -+ -+static int bcm6318_pinctrl_set_mux(struct pinctrl_dev *pctldev, -+ unsigned selector, unsigned group) -+{ -+ struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ const struct bcm6318_pingroup *grp = &bcm6318_groups[group]; -+ const struct bcm6318_function *f = &bcm6318_funcs[selector]; -+ -+ bcm6318_rmw_mux(pctl, grp->pins[0], f->mode_val, f->mux_val); -+ -+ return 0; -+} -+ -+static int bcm6318_gpio_request_enable(struct pinctrl_dev *pctldev, -+ struct pinctrl_gpio_range *range, -+ unsigned offset) -+{ -+ struct bcm6318_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); -+ -+ /* disable all functions using this pin */ -+ if (offset < 13) { -+ /* GPIOs 0-12 use mux 0 as GPIO function */ -+ bcm6318_rmw_mux(pctl, offset, 0, 0); -+ } else if (offset < 42) { -+ /* GPIOs 13-41 use mux 3 as GPIO function */ -+ bcm6318_rmw_mux(pctl, offset, 0, 3); -+ -+ /* FIXME: revert to old value for non gpio? */ -+ bcm6318_set_pad(pctl, offset, 0); -+ } else { -+ /* no idea, really */ -+ } -+ -+ return 0; -+} -+ -+static struct pinctrl_ops bcm6318_pctl_ops = { -+ .get_groups_count = bcm6318_pinctrl_get_group_count, -+ .get_group_name = bcm6318_pinctrl_get_group_name, -+ .get_group_pins = bcm6318_pinctrl_get_group_pins, -+#ifdef CONFIG_OF -+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, -+ .dt_free_map = pinctrl_utils_free_map, -+#endif -+}; -+ -+static struct pinmux_ops bcm6318_pmx_ops = { -+ .get_functions_count = bcm6318_pinctrl_get_func_count, -+ .get_function_name = bcm6318_pinctrl_get_func_name, -+ .get_function_groups = bcm6318_pinctrl_get_groups, -+ .set_mux = bcm6318_pinctrl_set_mux, -+ .gpio_request_enable = bcm6318_gpio_request_enable, -+ .strict = true, -+}; -+ -+static int bcm6318_pinctrl_probe(struct platform_device *pdev) -+{ -+ struct bcm6318_pinctrl *pctl; -+ struct resource *res; -+ void __iomem *mode, *mux, *pad; -+ unsigned i; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mode"); -+ mode = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mode)) -+ return PTR_ERR(mode); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mux"); -+ mux = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mux)) -+ return PTR_ERR(mux); -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pad"); -+ pad = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(pad)) -+ return PTR_ERR(pad); -+ -+ pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); -+ if (!pctl) -+ return -ENOMEM; -+ -+ spin_lock_init(&pctl->lock); -+ -+ pctl->mode = mode; -+ -+ for (i = 0; i < 3; i++) -+ pctl->mux[i] = mux + (i * 4); -+ -+ for (i = 0; i < 6; i++) -+ pctl->pad[i] = pad + (i * 4); -+ -+ pctl->desc.name = dev_name(&pdev->dev); -+ pctl->desc.owner = THIS_MODULE; -+ pctl->desc.pctlops = &bcm6318_pctl_ops; -+ pctl->desc.pmxops = &bcm6318_pmx_ops; -+ -+ pctl->desc.npins = ARRAY_SIZE(bcm6318_pins); -+ pctl->desc.pins = bcm6318_pins; -+ -+ platform_set_drvdata(pdev, pctl); -+ -+ pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl, -+ pctl->gpio, BCM6318_NGPIO); -+ if (IS_ERR(pctl->pctldev)) -+ return PTR_ERR(pctl->pctldev); -+ -+ return 0; -+} -+ -+static const struct of_device_id bcm6318_pinctrl_match[] = { -+ { .compatible = "brcm,bcm6318-pinctrl", }, -+ { }, -+}; -+ -+static struct platform_driver bcm6318_pinctrl_driver = { -+ .probe = bcm6318_pinctrl_probe, -+ .driver = { -+ .name = "bcm6318-pinctrl", -+ .of_match_table = bcm6318_pinctrl_match, -+ }, -+}; -+ -+builtin_platform_driver(bcm6318_pinctrl_driver); diff --git a/target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch b/target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch deleted file mode 100644 index 67c8cee22c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/383-bcm63xx_select_pinctrl.patch +++ /dev/null @@ -1,65 +0,0 @@ ---- a/arch/mips/bcm63xx/Kconfig -+++ b/arch/mips/bcm63xx/Kconfig -@@ -25,6 +25,8 @@ config BCM63XX_CPU_6318 - select HW_HAS_PCI - select BCM63XX_OHCI - select BCM63XX_EHCI -+ select PINCTRL -+ select PINCTRL_BCM6318 - - config BCM63XX_CPU_6328 - bool "support 6328 CPU" -@@ -32,6 +34,8 @@ config BCM63XX_CPU_6328 - select HW_HAS_PCI - select BCM63XX_OHCI - select BCM63XX_EHCI -+ select PINCTRL -+ select PINCTRL_BCM6328 - - config BCM63XX_CPU_6338 - bool "support 6338 CPU" -@@ -47,6 +51,8 @@ config BCM63XX_CPU_6348 - select SYS_HAS_CPU_BMIPS32_3300 - select HW_HAS_PCI - select BCM63XX_OHCI -+ select PINCTRL -+ select PINCTRL_BCM6348 - - config BCM63XX_CPU_6358 - bool "support 6358 CPU" -@@ -54,6 +60,8 @@ config BCM63XX_CPU_6358 - select HW_HAS_PCI - select BCM63XX_OHCI - select BCM63XX_EHCI -+ select PINCTRL -+ select PINCTRL_BCM6358 - - config BCM63XX_CPU_6362 - bool "support 6362 CPU" -@@ -61,6 +69,8 @@ config BCM63XX_CPU_6362 - select HW_HAS_PCI - select BCM63XX_OHCI - select BCM63XX_EHCI -+ select PINCTRL -+ select PINCTRL_BCM6362 - - config BCM63XX_CPU_6368 - bool "support 6368 CPU" -@@ -68,6 +78,8 @@ config BCM63XX_CPU_6368 - select HW_HAS_PCI - select BCM63XX_OHCI - select BCM63XX_EHCI -+ select PINCTRL -+ select PINCTRL_BCM6368 - - config BCM63XX_CPU_63268 - bool "support 63268 CPU" -@@ -75,6 +87,8 @@ config BCM63XX_CPU_63268 - select HW_HAS_PCI - select BCM63XX_OHCI - select BCM63XX_EHCI -+ select PINCTRL -+ select PINCTRL_BCM63268 - endmenu - - source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch deleted file mode 100644 index fe4dbe3e13..0000000000 --- a/target/linux/bcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch +++ /dev/null @@ -1,105 +0,0 @@ -From cad8f63047c0691e8185d3c9c6a2705b83310c9c Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Mon, 31 Jul 2017 20:10:36 +0200 -Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree - ---- - arch/mips/bcm63xx/clk.c | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - ---- a/arch/mips/bcm63xx/clk.c -+++ b/arch/mips/bcm63xx/clk.c -@@ -489,6 +489,8 @@ static struct clk_lookup bcm3368_clks[] - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("fff8c100.serial", "refclk", &clk_periph), -+ CLKDEV_INIT("fff8c120.serial", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -505,7 +507,9 @@ static struct clk_lookup bcm6318_clks[] - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("10000100.serial", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), -+ CLKDEV_INIT("10003000.spi", "pll", &clk_hsspi_pll), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -519,7 +523,10 @@ static struct clk_lookup bcm6328_clks[] - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("10000100.serial", "refclk", &clk_periph), -+ CLKDEV_INIT("10000120.serial", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), -+ CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -532,6 +539,7 @@ static struct clk_lookup bcm6338_clks[] - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -546,6 +554,7 @@ static struct clk_lookup bcm6345_clks[] - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -560,6 +569,7 @@ static struct clk_lookup bcm6348_clks[] - /* fixed rate clocks */ - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), -+ CLKDEV_INIT("fffe0300.serial", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -576,6 +586,8 @@ static struct clk_lookup bcm6358_clks[] - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("fffe0100.serial", "refclk", &clk_periph), -+ CLKDEV_INIT("fffe0120.serial", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enet0", &clk_enet0), - CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -595,7 +607,10 @@ static struct clk_lookup bcm6362_clks[] - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("10000100.serial", "refclk", &clk_periph), -+ CLKDEV_INIT("10000120.serial", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), -+ CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -611,6 +626,8 @@ static struct clk_lookup bcm6368_clks[] - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("10000100.serial", "refclk", &clk_periph), -+ CLKDEV_INIT("10000120.serial", "refclk", &clk_periph), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -625,7 +642,10 @@ static struct clk_lookup bcm63268_clks[] - CLKDEV_INIT(NULL, "periph", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), -+ CLKDEV_INIT("10000180.serial", "refclk", &clk_periph), -+ CLKDEV_INIT("100001a0.serial", "refclk", &clk_periph), - CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll), -+ CLKDEV_INIT("10001000.spi", "pll", &clk_hsspi_pll), - /* gated clocks */ - CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), - CLKDEV_INIT(NULL, "usbh", &clk_usbh), diff --git a/target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch b/target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch deleted file mode 100644 index 03b8bfc7c6..0000000000 --- a/target/linux/bcm63xx/patches-4.14/390-MIPS-BCM63XX-do-not-register-SPI-controllers.patch +++ /dev/null @@ -1,172 +0,0 @@ -From 39d2882058345b5994680b8731848a0343878019 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sat, 4 Feb 2017 12:58:50 +0100 -Subject: [PATCH 7/8] MIPS: BCM63XX: do not register SPI controllers - -We now register them through DT, so no need to keep them here. - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 7 ------- - 1 file changed, 7 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -27,9 +27,7 @@ - #include - #include - #include --#include - #include --#include - #include - #include - #include -@@ -236,10 +234,6 @@ int __init board_register_devices(void) - bcm63xx_register_fallback_sprom(&board.fallback_sprom))) - pr_err(PFX "failed to register fallback SPROM\n"); - -- bcm63xx_spi_register(); -- -- bcm63xx_hsspi_register(); -- - bcm63xx_flash_register(); - - bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,7 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \ - setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ -- dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o dev-wdt.o \ -+ dev-rng.o dev-uart.o dev-wdt.o \ - dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \ - sprom.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o ---- a/arch/mips/bcm63xx/dev-hsspi.c -+++ /dev/null -@@ -1,48 +0,0 @@ --/* -- * This file is subject to the terms and conditions of the GNU General Public -- * License. See the file "COPYING" in the main directory of this archive -- * for more details. -- * -- * Copyright (C) 2012 Jonas Gorski -- */ -- --#include --#include --#include -- --#include --#include --#include -- --static struct resource spi_resources[] = { -- { -- .start = -1, /* filled at runtime */ -- .end = -1, /* filled at runtime */ -- .flags = IORESOURCE_MEM, -- }, -- { -- .start = -1, /* filled at runtime */ -- .flags = IORESOURCE_IRQ, -- }, --}; -- --static struct platform_device bcm63xx_hsspi_device = { -- .name = "bcm63xx-hsspi", -- .id = 0, -- .num_resources = ARRAY_SIZE(spi_resources), -- .resource = spi_resources, --}; -- --int __init bcm63xx_hsspi_register(void) --{ -- if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() && -- !BCMCPU_IS_63268()) -- return -ENODEV; -- -- spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI); -- spi_resources[0].end = spi_resources[0].start; -- spi_resources[0].end += RSET_HSSPI_SIZE - 1; -- spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI); -- -- return platform_device_register(&bcm63xx_hsspi_device); --} ---- a/arch/mips/bcm63xx/dev-spi.c -+++ /dev/null -@@ -1,60 +0,0 @@ --/* -- * This file is subject to the terms and conditions of the GNU General Public -- * License. See the file "COPYING" in the main directory of this archive -- * for more details. -- * -- * Copyright (C) 2009-2011 Florian Fainelli -- * Copyright (C) 2010 Tanguy Bouzeloc -- */ -- --#include --#include --#include --#include --#include --#include -- --#include --#include --#include -- --static struct resource spi_resources[] = { -- { -- .start = -1, /* filled at runtime */ -- .end = -1, /* filled at runtime */ -- .flags = IORESOURCE_MEM, -- }, -- { -- .start = -1, /* filled at runtime */ -- .flags = IORESOURCE_IRQ, -- }, --}; -- --static struct platform_device bcm63xx_spi_device = { -- .id = -1, -- .num_resources = ARRAY_SIZE(spi_resources), -- .resource = spi_resources, --}; -- --int __init bcm63xx_spi_register(void) --{ -- if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345()) -- return -ENODEV; -- -- spi_resources[0].start = bcm63xx_regset_address(RSET_SPI); -- spi_resources[0].end = spi_resources[0].start; -- spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI); -- -- if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { -- bcm63xx_spi_device.name = "bcm6348-spi", -- spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1; -- } -- -- if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() || -- BCMCPU_IS_6368() || BCMCPU_IS_63268()) { -- bcm63xx_spi_device.name = "bcm6358-spi", -- spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; -- } -- -- return platform_device_register(&bcm63xx_spi_device); --} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h -+++ /dev/null -@@ -1,9 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --#ifndef BCM63XX_DEV_HSSPI_H --#define BCM63XX_DEV_HSSPI_H -- --#include -- --int bcm63xx_hsspi_register(void); -- --#endif /* BCM63XX_DEV_HSSPI_H */ diff --git a/target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch b/target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch deleted file mode 100644 index e9d4481d14..0000000000 --- a/target/linux/bcm63xx/patches-4.14/391-MIPS-BCM63XX-do-not-register-uart.patch +++ /dev/null @@ -1,259 +0,0 @@ ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -1,7 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \ - setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ -- dev-rng.o dev-uart.o dev-wdt.o \ -+ dev-rng.o dev-wdt.o \ - dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \ - sprom.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o ---- a/arch/mips/bcm63xx/dev-uart.c -+++ /dev/null -@@ -1,76 +0,0 @@ --/* -- * This file is subject to the terms and conditions of the GNU General Public -- * License. See the file "COPYING" in the main directory of this archive -- * for more details. -- * -- * Copyright (C) 2008 Maxime Bizon -- */ -- --#include --#include --#include --#include -- --static struct resource uart0_resources[] = { -- { -- /* start & end filled at runtime */ -- .flags = IORESOURCE_MEM, -- }, -- { -- /* start filled at runtime */ -- .flags = IORESOURCE_IRQ, -- }, --}; -- --static struct resource uart1_resources[] = { -- { -- /* start & end filled at runtime */ -- .flags = IORESOURCE_MEM, -- }, -- { -- /* start filled at runtime */ -- .flags = IORESOURCE_IRQ, -- }, --}; -- --static struct platform_device bcm63xx_uart_devices[] = { -- { -- .name = "bcm63xx_uart", -- .id = 0, -- .num_resources = ARRAY_SIZE(uart0_resources), -- .resource = uart0_resources, -- }, -- -- { -- .name = "bcm63xx_uart", -- .id = 1, -- .num_resources = ARRAY_SIZE(uart1_resources), -- .resource = uart1_resources, -- } --}; -- --int __init bcm63xx_uart_register(unsigned int id) --{ -- if (id >= ARRAY_SIZE(bcm63xx_uart_devices)) -- return -ENODEV; -- -- if (id == 1 && (!BCMCPU_IS_3368() && !BCMCPU_IS_6358() && -- !BCMCPU_IS_6368())) -- return -ENODEV; -- -- if (id == 0) { -- uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0); -- uart0_resources[0].end = uart0_resources[0].start + -- RSET_UART_SIZE - 1; -- uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0); -- } -- -- if (id == 1) { -- uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1); -- uart1_resources[0].end = uart1_resources[0].start + -- RSET_UART_SIZE - 1; -- uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1); -- } -- -- return platform_device_register(&bcm63xx_uart_devices[id]); --} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h -+++ /dev/null -@@ -1,7 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 */ --#ifndef BCM63XX_DEV_UART_H_ --#define BCM63XX_DEV_UART_H_ -- --int bcm63xx_uart_register(unsigned int id); -- --#endif /* BCM63XX_DEV_UART_H_ */ ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -32,8 +32,6 @@ struct board_info { - unsigned int has_ohci0:1; - unsigned int has_ehci0:1; - unsigned int has_usbd:1; -- unsigned int has_uart0:1; -- unsigned int has_uart1:1; - unsigned int use_fallback_sprom:1; - - /* ethernet config */ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -20,7 +20,6 @@ - #include - #include - #include --#include - #include - #include - #include -@@ -188,12 +187,6 @@ int __init board_register_devices(void) - - bcm63xx_gpio_init(); - -- if (board.has_uart0) -- bcm63xx_uart_register(0); -- -- if (board.has_uart1) -- bcm63xx_uart_register(1); -- - if (board.has_pccard) - bcm63xx_pcmcia_register(); - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -35,9 +35,6 @@ static struct board_info __initdata boar - .name = "CVG834G_E15R3921", - .expected_cpu_id = 0x3368, - -- .has_uart0 = 1, -- .has_uart1 = 1, -- - .has_enet0 = 1, - .has_pci = 1, - -@@ -67,7 +64,6 @@ static struct board_info __initdata boar - .name = "96328avng", - .expected_cpu_id = 0x6328, - -- .has_uart0 = 1, - .has_pci = 1, - .has_usbd = 0, - .use_fallback_sprom = 1, -@@ -116,7 +112,6 @@ static struct board_info __initdata boar - .name = "96338GW", - .expected_cpu_id = 0x6338, - -- .has_uart0 = 1, - .has_enet0 = 1, - .enet0 = { - .force_speed_100 = 1, -@@ -159,7 +154,6 @@ static struct board_info __initdata boar - .name = "96338W", - .expected_cpu_id = 0x6338, - -- .has_uart0 = 1, - .has_enet0 = 1, - .enet0 = { - .force_speed_100 = 1, -@@ -204,8 +198,6 @@ static struct board_info __initdata boar - static struct board_info __initdata board_96345gw2 = { - .name = "96345GW2", - .expected_cpu_id = 0x6345, -- -- .has_uart0 = 1, - }; - #endif - -@@ -217,7 +209,6 @@ static struct board_info __initdata boar - .name = "96348R", - .expected_cpu_id = 0x6348, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_pci = 1, - .use_fallback_sprom = 1, -@@ -262,7 +253,6 @@ static struct board_info __initdata boar - .name = "96348GW-10", - .expected_cpu_id = 0x6348, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -@@ -315,7 +305,6 @@ static struct board_info __initdata boar - .name = "96348GW-11", - .expected_cpu_id = 0x6348, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -@@ -370,7 +359,6 @@ static struct board_info __initdata boar - .name = "96348GW", - .expected_cpu_id = 0x6348, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -@@ -421,7 +409,6 @@ static struct board_info __initdata boar - .name = "F@ST2404", - .expected_cpu_id = 0x6348, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -@@ -466,7 +453,6 @@ static struct board_info __initdata boar - .name = "DV201AMR", - .expected_cpu_id = 0x6348, - -- .has_uart0 = 1, - .has_pci = 1, - .use_fallback_sprom = 1, - .has_ohci0 = 1, -@@ -487,7 +473,6 @@ static struct board_info __initdata boar - .name = "96348GW-A", - .expected_cpu_id = 0x6348, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -@@ -514,7 +499,6 @@ static struct board_info __initdata boar - .name = "96358VW", - .expected_cpu_id = 0x6358, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -@@ -567,7 +551,6 @@ static struct board_info __initdata boar - .name = "96358VW2", - .expected_cpu_id = 0x6358, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, -@@ -617,7 +600,6 @@ static struct board_info __initdata boar - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, - -- .has_uart0 = 1, - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, diff --git a/target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch b/target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch deleted file mode 100644 index e1394267b5..0000000000 --- a/target/linux/bcm63xx/patches-4.14/392-MIPS-BCM63XX-remove-leds-and-buttons.patch +++ /dev/null @@ -1,343 +0,0 @@ -From 997f53b174c63153335508c22dc4493e8e5808d6 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 22 Feb 2015 17:52:32 +0100 -Subject: [PATCH] MIPS: BCM63XX: remove leds and buttons - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 262 ----------------------------- - 1 file changed, 262 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -43,14 +43,6 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - -- .leds = { -- { -- .name = "CVG834G:green:power", -- .gpio = 37, -- .default_trigger= "default-on", -- }, -- }, -- - .ephy_reset_gpio = 36, - .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, - }; -@@ -72,35 +64,6 @@ static struct board_info __initdata boar - .use_fullspeed = 0, - .port_no = 0, - }, -- -- .leds = { -- { -- .name = "96328avng::ppp-fail", -- .gpio = 2, -- .active_low = 1, -- }, -- { -- .name = "96328avng::power", -- .gpio = 4, -- .active_low = 1, -- .default_trigger = "default-on", -- }, -- { -- .name = "96328avng::power-fail", -- .gpio = 8, -- .active_low = 1, -- }, -- { -- .name = "96328avng::wps", -- .gpio = 9, -- .active_low = 1, -- }, -- { -- .name = "96328avng::ppp", -- .gpio = 11, -- .active_low = 1, -- }, -- }, - }; - #endif - -@@ -119,35 +82,6 @@ static struct board_info __initdata boar - }, - - .has_ohci0 = 1, -- -- .leds = { -- { -- .name = "adsl", -- .gpio = 3, -- .active_low = 1, -- }, -- { -- .name = "ses", -- .gpio = 5, -- .active_low = 1, -- }, -- { -- .name = "ppp-fail", -- .gpio = 4, -- .active_low = 1, -- }, -- { -- .name = "power", -- .gpio = 0, -- .active_low = 1, -- .default_trigger = "default-on", -- }, -- { -- .name = "stop", -- .gpio = 1, -- .active_low = 1, -- } -- }, - }; - - static struct board_info __initdata board_96338w = { -@@ -159,35 +93,6 @@ static struct board_info __initdata boar - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -- -- .leds = { -- { -- .name = "adsl", -- .gpio = 3, -- .active_low = 1, -- }, -- { -- .name = "ses", -- .gpio = 5, -- .active_low = 1, -- }, -- { -- .name = "ppp-fail", -- .gpio = 4, -- .active_low = 1, -- }, -- { -- .name = "power", -- .gpio = 0, -- .active_low = 1, -- .default_trigger = "default-on", -- }, -- { -- .name = "stop", -- .gpio = 1, -- .active_low = 1, -- }, -- }, - }; - #endif - -@@ -217,36 +122,6 @@ static struct board_info __initdata boar - .has_phy = 1, - .use_internal_phy = 1, - }, -- -- .leds = { -- { -- .name = "adsl-fail", -- .gpio = 2, -- .active_low = 1, -- }, -- { -- .name = "ppp", -- .gpio = 3, -- .active_low = 1, -- }, -- { -- .name = "ppp-fail", -- .gpio = 4, -- .active_low = 1, -- }, -- { -- .name = "power", -- .gpio = 0, -- .active_low = 1, -- .default_trigger = "default-on", -- -- }, -- { -- .name = "stop", -- .gpio = 1, -- .active_low = 1, -- }, -- }, - }; - - static struct board_info __initdata board_96348gw_10 = { -@@ -270,35 +145,6 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -- -- .leds = { -- { -- .name = "adsl-fail", -- .gpio = 2, -- .active_low = 1, -- }, -- { -- .name = "ppp", -- .gpio = 3, -- .active_low = 1, -- }, -- { -- .name = "ppp-fail", -- .gpio = 4, -- .active_low = 1, -- }, -- { -- .name = "power", -- .gpio = 0, -- .active_low = 1, -- .default_trigger = "default-on", -- }, -- { -- .name = "stop", -- .gpio = 1, -- .active_low = 1, -- }, -- }, - }; - - static struct board_info __initdata board_96348gw_11 = { -@@ -324,35 +170,6 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -- -- .leds = { -- { -- .name = "adsl-fail", -- .gpio = 2, -- .active_low = 1, -- }, -- { -- .name = "ppp", -- .gpio = 3, -- .active_low = 1, -- }, -- { -- .name = "ppp-fail", -- .gpio = 4, -- .active_low = 1, -- }, -- { -- .name = "power", -- .gpio = 0, -- .active_low = 1, -- .default_trigger = "default-on", -- }, -- { -- .name = "stop", -- .gpio = 1, -- .active_low = 1, -- }, -- }, - }; - - static struct board_info __initdata board_96348gw = { -@@ -374,35 +191,6 @@ static struct board_info __initdata boar - }, - - .has_ohci0 = 1, -- -- .leds = { -- { -- .name = "adsl-fail", -- .gpio = 2, -- .active_low = 1, -- }, -- { -- .name = "ppp", -- .gpio = 3, -- .active_low = 1, -- }, -- { -- .name = "ppp-fail", -- .gpio = 4, -- .active_low = 1, -- }, -- { -- .name = "power", -- .gpio = 0, -- .active_low = 1, -- .default_trigger = "default-on", -- }, -- { -- .name = "stop", -- .gpio = 1, -- .active_low = 1, -- }, -- }, - }; - - static struct board_info __initdata board_FAST2404 = { -@@ -518,33 +306,6 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -- -- .leds = { -- { -- .name = "adsl-fail", -- .gpio = 15, -- .active_low = 1, -- }, -- { -- .name = "ppp", -- .gpio = 22, -- .active_low = 1, -- }, -- { -- .name = "ppp-fail", -- .gpio = 23, -- .active_low = 1, -- }, -- { -- .name = "power", -- .gpio = 4, -- .default_trigger = "default-on", -- }, -- { -- .name = "stop", -- .gpio = 5, -- }, -- }, - }; - - static struct board_info __initdata board_96358vw2 = { -@@ -571,29 +332,6 @@ static struct board_info __initdata boar - .has_pccard = 1, - .has_ehci0 = 1, - .num_usbh_ports = 2, -- -- .leds = { -- { -- .name = "adsl", -- .gpio = 22, -- .active_low = 1, -- }, -- { -- .name = "ppp-fail", -- .gpio = 23, -- }, -- { -- .name = "power", -- .gpio = 5, -- .active_low = 1, -- .default_trigger = "default-on", -- }, -- { -- .name = "stop", -- .gpio = 4, -- .active_low = 1, -- }, -- }, - }; - - static struct board_info __initdata board_AGPFS0 = { diff --git a/target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch b/target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch deleted file mode 100644 index c693ace363..0000000000 --- a/target/linux/bcm63xx/patches-4.14/400-bcm963xx_flashmap.patch +++ /dev/null @@ -1,65 +0,0 @@ -From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Mon, 12 May 2008 18:54:09 +0200 -Subject: [PATCH] bcm963xx: flashmap support - -Signed-off-by: Axel Gembe ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 19 +---------------- - drivers/mtd/maps/bcm963xx-flash.c | 32 ++++++++++++++++++++++++---- - drivers/mtd/redboot.c | 13 +++++++++-- - 3 files changed, 38 insertions(+), 26 deletions(-) - ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -35,7 +35,7 @@ static struct mtd_partition mtd_partitio - } - }; - --static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL }; -+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL }; - - static struct physmap_flash_data flash_data = { - .width = 2, ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru - int nulllen = 0; - int numslots; - unsigned long offset; -+ unsigned long fis_origin = 0; - #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED - static char nullstring[] = "unallocated"; - #endif -@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru - goto out; - } - -+ if (data && data->origin) { -+ fis_origin = data->origin; -+ } else { -+ for (i = 0; i < numslots; i++) { -+ if (!strncmp(buf[i].name, "RedBoot", 8)) { -+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); -+ } -+ } -+ } -+ - for (i = 0; i < numslots; i++) { - struct fis_list *new_fl, **prev; - -@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru - goto out; - } - new_fl->img = &buf[i]; -- if (data && data->origin) -- buf[i].flash_base -= data->origin; -- else -- buf[i].flash_base &= master->size-1; -+ if (fis_origin) -+ buf[i].flash_base -= fis_origin; -+ -+ buf[i].flash_base &= (master->size << 1) - 1; - - /* I'm sure the JFFS2 code has done me permanent damage. - * I now think the following is _normal_ diff --git a/target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch b/target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch deleted file mode 100644 index efefba41b5..0000000000 --- a/target/linux/bcm63xx/patches-4.14/401-bcm963xx_real_rootfs_length.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/include/linux/bcm963xx_tag.h -+++ b/include/linux/bcm963xx_tag.h -@@ -92,8 +92,10 @@ struct bcm_tag { - __u32 rootfs_crc; - /* 224-227: CRC32 of kernel partition */ - __u32 kernel_crc; -- /* 228-235: Unused at present */ -- char reserved1[8]; -+ /* 228-231: Unused at present */ -+ char reserved1[4]; -+ /* 222-235: Openwrt: real rootfs length */ -+ __u32 real_rootfs_length; - /* 236-239: CRC32 of header excluding last 20 bytes */ - __u32 header_crc; - /* 240-255: Unused at present */ ---- a/drivers/mtd/parsers/parser_imagetag.c -+++ b/drivers/mtd/parsers/parser_imagetag.c -@@ -137,7 +137,8 @@ static int bcm963xx_parse_imagetag_parti - } else { - /* OpenWrt layout */ - rootfsaddr = kerneladdr + kernellen; -- rootfslen = spareaddr - rootfsaddr; -+ rootfslen = buf->real_rootfs_length; -+ spareaddr = rootfsaddr + rootfslen; - } - } else { - goto out; diff --git a/target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch deleted file mode 100644 index 3604910d39..0000000000 --- a/target/linux/bcm63xx/patches-4.14/402_bcm63xx_enet_vlan_incoming_fixed.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -1637,7 +1637,7 @@ static int bcm_enet_change_mtu(struct ne - return -EBUSY; - - /* add ethernet header + vlan tag size */ -- actual_mtu += VLAN_ETH_HLEN; -+ actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN; - - /* - * setup maximum size before we get overflow mark in diff --git a/target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch b/target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch deleted file mode 100644 index efd9763a48..0000000000 --- a/target/linux/bcm63xx/patches-4.14/403-6358-enet1-external-mii-clk.patch +++ /dev/null @@ -1,22 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -97,6 +97,8 @@ void __init board_early_setup(const stru - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G3_EXT_MII | - GPIO_MODE_6348_G0_EXT_MII; -+ else if (BCMCPU_IS_6358()) -+ val |= GPIO_MODE_6358_ENET1_MII_CLK_INV; - } - - bcm_gpio_writel(val, GPIO_MODE_REG); ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -652,6 +652,8 @@ - #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) - #define GPIO_MODE_6358_SERIAL_LED (1 << 10) - #define GPIO_MODE_6358_UTOPIA (1 << 12) -+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30) -+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31) - - #define GPIO_MODE_6368_ANALOG_AFE_0 (1 << 0) - #define GPIO_MODE_6368_ANALOG_AFE_1 (1 << 1) diff --git a/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch deleted file mode 100644 index c9532e6cb4..0000000000 --- a/target/linux/bcm63xx/patches-4.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch +++ /dev/null @@ -1,269 +0,0 @@ -From 7fa63fdde703aaabaa7199ae879219737a98a3f3 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 6 Jan 2012 12:24:18 +0100 -Subject: [PATCH] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove - -Only connect/disconnect the phy during probe and remove, not during any -open/close. The phy seldom changes during the runtime, and disconnecting -the phy during close will prevent it from keeping any configuration over -a down/up cycle. - -Signed-off-by: Jonas Gorski ---- - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 158 +++++++++++++-------------- - 1 file changed, 78 insertions(+), 80 deletions(-) - ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi - struct bcm_enet_priv *priv; - struct sockaddr addr; - struct device *kdev; -- struct phy_device *phydev; - int i, ret; - unsigned int size; -- char phy_id[MII_BUS_ID_SIZE + 3]; - void *p; - u32 val; - -@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi - kdev = &priv->pdev->dev; - - if (priv->has_phy) { -- /* connect to PHY */ -- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, -- priv->mii_bus->id, priv->phy_id); -- -- phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, -- PHY_INTERFACE_MODE_MII); -- -- if (IS_ERR(phydev)) { -- dev_err(kdev, "could not attach to PHY\n"); -- return PTR_ERR(phydev); -- } -- -- /* mask with MAC supported features */ -- phydev->supported &= (SUPPORTED_10baseT_Half | -- SUPPORTED_10baseT_Full | -- SUPPORTED_100baseT_Half | -- SUPPORTED_100baseT_Full | -- SUPPORTED_Autoneg | -- SUPPORTED_Pause | -- SUPPORTED_MII); -- phydev->advertising = phydev->supported; -- -- if (priv->pause_auto && priv->pause_rx && priv->pause_tx) -- phydev->advertising |= SUPPORTED_Pause; -- else -- phydev->advertising &= ~SUPPORTED_Pause; -- -- phy_attached_info(phydev); -- -+ /* Reset state */ - priv->old_link = 0; - priv->old_duplex = -1; - priv->old_pause = -1; -- } else { -- phydev = NULL; - } - - /* mask all interrupts and request them */ -@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi - - ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev); - if (ret) -- goto out_phy_disconnect; -+ return ret; - - ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0, - dev->name, dev); -@@ -1086,8 +1054,8 @@ static int bcm_enet_open(struct net_devi - enet_dmac_writel(priv, priv->dma_chan_int_mask, - ENETDMAC_IRMASK, priv->tx_chan); - -- if (phydev) -- phy_start(phydev); -+ if (priv->has_phy) -+ phy_start(dev->phydev); - else - bcm_enet_adjust_link(dev); - -@@ -1128,10 +1096,6 @@ out_freeirq_rx: - out_freeirq: - free_irq(dev->irq, dev); - --out_phy_disconnect: -- if (phydev) -- phy_disconnect(phydev); -- - return ret; - } - -@@ -1236,10 +1200,6 @@ static int bcm_enet_stop(struct net_devi - free_irq(priv->irq_rx, dev); - free_irq(dev->irq, dev); - -- /* release phy */ -- if (priv->has_phy) -- phy_disconnect(dev->phydev); -- - return 0; - } - -@@ -1805,14 +1765,49 @@ static int bcm_enet_probe(struct platfor - - /* do minimal hardware init to be able to probe mii bus */ - bcm_enet_hw_preinit(priv); -+ spin_lock_init(&priv->rx_lock); -+ -+ /* init rx timeout (used for oom) */ -+ init_timer(&priv->rx_timeout); -+ priv->rx_timeout.function = bcm_enet_refill_rx_timer; -+ priv->rx_timeout.data = (unsigned long)dev; -+ -+ /* init the mib update lock&work */ -+ mutex_init(&priv->mib_update_lock); -+ INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer); -+ -+ /* zero mib counters */ -+ for (i = 0; i < ENET_MIB_REG_COUNT; i++) -+ enet_writel(priv, 0, ENET_MIB_REG(i)); -+ -+ /* register netdevice */ -+ dev->netdev_ops = &bcm_enet_ops; -+ netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16); -+ -+ dev->ethtool_ops = &bcm_enet_ethtool_ops; -+ /* MTU range: 46 - 2028 */ -+ dev->min_mtu = ETH_ZLEN - ETH_HLEN; -+ dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN; -+ SET_NETDEV_DEV(dev, &pdev->dev); -+ -+ ret = register_netdev(dev); -+ if (ret) -+ goto out_uninit_hw; -+ -+ netif_carrier_off(dev); -+ platform_set_drvdata(pdev, dev); -+ priv->pdev = pdev; -+ priv->net_dev = dev; - - /* MII bus registration */ - if (priv->has_phy) { -+ struct phy_device *phydev; -+ char phy_id[MII_BUS_ID_SIZE + 3]; - - priv->mii_bus = mdiobus_alloc(); - if (!priv->mii_bus) { - ret = -ENOMEM; -- goto out_uninit_hw; -+ goto out_unregister_netdev; - } - - bus = priv->mii_bus; -@@ -1836,6 +1831,35 @@ static int bcm_enet_probe(struct platfor - dev_err(&pdev->dev, "unable to register mdio bus\n"); - goto out_free_mdio; - } -+ -+ /* connect to PHY */ -+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, -+ priv->mii_bus->id, priv->phy_id); -+ -+ phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, -+ PHY_INTERFACE_MODE_MII); -+ -+ if (IS_ERR(phydev)) { -+ dev_err(&pdev->dev, "could not attach to PHY\n"); -+ goto out_unregister_mdio; -+ } -+ -+ /* mask with MAC supported features */ -+ phydev->supported &= (SUPPORTED_10baseT_Half | -+ SUPPORTED_10baseT_Full | -+ SUPPORTED_100baseT_Half | -+ SUPPORTED_100baseT_Full | -+ SUPPORTED_Autoneg | -+ SUPPORTED_Pause | -+ SUPPORTED_MII); -+ phydev->advertising = phydev->supported; -+ -+ if (priv->pause_auto && priv->pause_rx && priv->pause_tx) -+ phydev->advertising |= SUPPORTED_Pause; -+ else -+ phydev->advertising &= ~SUPPORTED_Pause; -+ -+ phy_attached_info(phydev); - } else { - - /* run platform code to initialize PHY device */ -@@ -1843,47 +1867,16 @@ static int bcm_enet_probe(struct platfor - pd->mii_config(dev, 1, bcm_enet_mdio_read_mii, - bcm_enet_mdio_write_mii)) { - dev_err(&pdev->dev, "unable to configure mdio bus\n"); -- goto out_uninit_hw; -+ goto out_unregister_netdev; - } - } - -- spin_lock_init(&priv->rx_lock); -- -- /* init rx timeout (used for oom) */ -- init_timer(&priv->rx_timeout); -- priv->rx_timeout.function = bcm_enet_refill_rx_timer; -- priv->rx_timeout.data = (unsigned long)dev; -- -- /* init the mib update lock&work */ -- mutex_init(&priv->mib_update_lock); -- INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer); -- -- /* zero mib counters */ -- for (i = 0; i < ENET_MIB_REG_COUNT; i++) -- enet_writel(priv, 0, ENET_MIB_REG(i)); -- -- /* register netdevice */ -- dev->netdev_ops = &bcm_enet_ops; -- netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16); -- -- dev->ethtool_ops = &bcm_enet_ethtool_ops; -- /* MTU range: 46 - 2028 */ -- dev->min_mtu = ETH_ZLEN - ETH_HLEN; -- dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN; -- SET_NETDEV_DEV(dev, &pdev->dev); -- -- ret = register_netdev(dev); -- if (ret) -- goto out_unregister_mdio; -- -- netif_carrier_off(dev); -- platform_set_drvdata(pdev, dev); -- priv->pdev = pdev; -- priv->net_dev = dev; -- - return 0; - - out_unregister_mdio: -+ if (dev->phydev) -+ phy_disconnect(dev->phydev); -+ - if (priv->mii_bus) - mdiobus_unregister(priv->mii_bus); - -@@ -1891,6 +1884,9 @@ out_free_mdio: - if (priv->mii_bus) - mdiobus_free(priv->mii_bus); - -+out_unregister_netdev: -+ unregister_netdev(dev); -+ - out_uninit_hw: - /* turn off mdc clock */ - enet_writel(priv, 0, ENET_MIISC_REG); -@@ -1921,6 +1917,7 @@ static int bcm_enet_remove(struct platfo - enet_writel(priv, 0, ENET_MIISC_REG); - - if (priv->has_phy) { -+ phy_disconnect(dev->phydev); - mdiobus_unregister(priv->mii_bus); - mdiobus_free(priv->mii_bus); - } else { diff --git a/target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch deleted file mode 100644 index 7bd1e51e7e..0000000000 --- a/target/linux/bcm63xx/patches-4.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch +++ /dev/null @@ -1,53 +0,0 @@ -From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 15 Jul 2012 20:08:57 +0200 -Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports - ---- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 13 +++++++++++++ - drivers/net/ethernet/broadcom/bcm63xx_enet.c | 12 ++++++++++++ - 2 files changed, 25 insertions(+), 0 deletions(-) - ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -968,6 +968,19 @@ - #define ENETSW_PORTOV_FDX_MASK (1 << 1) - #define ENETSW_PORTOV_LINKUP_MASK (1 << 0) - -+/* Port RGMII control register */ -+#define ENETSW_RGMII_CTRL_REG(x) (0x60 + (x)) -+#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7) -+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6) -+#define ENETSW_RGMII_CTRL_MII_MODE_MASK (3 << 4) -+#define ENETSW_RGMII_CTRL_RGMII_MODE (0 << 4) -+#define ENETSW_RGMII_CTRL_MII_MODE (1 << 4) -+#define ENETSW_RGMII_CTRL_RVMII_MODE (2 << 4) -+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN (1 << 0) -+ -+/* Port RGMII timing register */ -+#define ENETSW_RGMII_TIMING_REG(x) (0x68 + (x)) -+ - /* MDIO control register */ - #define ENETSW_MDIOC_REG (0xb0) - #define ENETSW_MDIOC_EXT_MASK (1 << 16) ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -2192,6 +2192,18 @@ static int bcm_enetsw_open(struct net_de - priv->sw_port_link[i] = 0; - } - -+ /* enable external ports */ -+ for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) { -+ u8 rgmii_ctrl; -+ -+ if (!priv->used_ports[i].used) -+ continue; -+ -+ rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i)); -+ rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN; -+ enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i)); -+ } -+ - /* reset mib */ - val = enetsw_readb(priv, ENETSW_GMCR_REG); - val |= ENETSW_GMCR_RST_MIB_MASK; diff --git a/target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch deleted file mode 100644 index a91494db41..0000000000 --- a/target/linux/bcm63xx/patches-4.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch +++ /dev/null @@ -1,157 +0,0 @@ -From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 3 Jul 2011 15:00:38 +0200 -Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/dev-flash.c | 35 +++++++++++++++++++- - arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 + - 2 files changed, 33 insertions(+), 2 deletions(-) - ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -17,6 +17,9 @@ - #include - #include - #include -+#include -+#include -+#include - - #include - #include -@@ -66,6 +69,41 @@ void __init bcm63xx_flash_force_phys_bas - mtd_resources[0].end = end; - } - -+static struct spi_board_info bcm63xx_spi_flash_info[] = { -+ { -+ .bus_num = 0, -+ .chip_select = 0, -+ .mode = 0, -+ .max_speed_hz = 781000, -+ .modalias = "m25p80", -+ }, -+}; -+ -+static void bcm63xx_of_update_spi_flash_speed(struct device_node *np, -+ unsigned int new_hz) -+{ -+ struct property *max_hz; -+ __be32 *hz; -+ -+ max_hz = kzalloc(sizeof(*max_hz) + sizeof(*hz), GFP_KERNEL); -+ if (!max_hz) -+ return; -+ -+ max_hz->name = kstrdup("spi-max-frequency", GFP_KERNEL); -+ if (!max_hz->name) { -+ kfree(max_hz); -+ return; -+ } -+ -+ max_hz->value = max_hz + 1; -+ max_hz->length = sizeof(*hz); -+ -+ hz = max_hz->value; -+ *hz = cpu_to_be32(new_hz); -+ -+ of_update_property(np, max_hz); -+} -+ - static int __init bcm63xx_detect_flash_type(void) - { - u32 val; -@@ -73,9 +111,15 @@ static int __init bcm63xx_detect_flash_t - switch (bcm63xx_get_cpu_id()) { - case BCM6318_CPU_ID: - /* only support serial flash */ -+ bcm63xx_spi_flash_info[0].max_speed_hz = 62500000; - return BCM63XX_FLASH_TYPE_SERIAL; - case BCM6328_CPU_ID: - val = bcm_misc_readl(MISC_STRAPBUS_6328_REG); -+ if (val & STRAPBUS_6328_HSSPI_CLK_FAST) -+ bcm63xx_spi_flash_info[0].max_speed_hz = 33333334; -+ else -+ bcm63xx_spi_flash_info[0].max_speed_hz = 16666667; -+ - if (val & STRAPBUS_6328_BOOT_SEL_SERIAL) - return BCM63XX_FLASH_TYPE_SERIAL; - else -@@ -94,12 +138,20 @@ static int __init bcm63xx_detect_flash_t - return BCM63XX_FLASH_TYPE_SERIAL; - case BCM6362_CPU_ID: - val = bcm_misc_readl(MISC_STRAPBUS_6362_REG); -+ if (val & STRAPBUS_6362_HSSPI_CLK_FAST) -+ bcm63xx_spi_flash_info[0].max_speed_hz = 50000000; -+ else -+ bcm63xx_spi_flash_info[0].max_speed_hz = 20000000; -+ - if (val & STRAPBUS_6362_BOOT_SEL_SERIAL) - return BCM63XX_FLASH_TYPE_SERIAL; - else - return BCM63XX_FLASH_TYPE_NAND; - case BCM6368_CPU_ID: - val = bcm_gpio_readl(GPIO_STRAPBUS_REG); -+ if (val & STRAPBUS_6368_SPI_CLK_FAST) -+ bcm63xx_spi_flash_info[0].max_speed_hz = 20000000; -+ - switch (val & STRAPBUS_6368_BOOT_SEL_MASK) { - case STRAPBUS_6368_BOOT_SEL_NAND: - return BCM63XX_FLASH_TYPE_NAND; -@@ -110,6 +162,11 @@ static int __init bcm63xx_detect_flash_t - } - case BCM63268_CPU_ID: - val = bcm_misc_readl(MISC_STRAPBUS_63268_REG); -+ if (val & STRAPBUS_63268_HSSPI_CLK_FAST) -+ bcm63xx_spi_flash_info[0].max_speed_hz = 50000000; -+ else -+ bcm63xx_spi_flash_info[0].max_speed_hz = 20000000; -+ - if (val & STRAPBUS_63268_BOOT_SEL_SERIAL) - return BCM63XX_FLASH_TYPE_SERIAL; - else -@@ -176,6 +233,7 @@ void __init bcm63xx_flash_detect(void) - - int __init bcm63xx_flash_register(void) - { -+ struct device_node *np; - u32 val; - - switch (flash_type) { -@@ -195,8 +253,14 @@ int __init bcm63xx_flash_register(void) - - return platform_device_register(&mtd_dev); - case BCM63XX_FLASH_TYPE_SERIAL: -- pr_warn("unsupported serial flash detected\n"); -- return -ENODEV; -+ np = of_find_compatible_node(NULL, NULL, "jedec,spi-nor"); -+ if (np) { -+ bcm63xx_of_update_spi_flash_speed(np, bcm63xx_spi_flash_info[0].max_speed_hz); -+ of_node_put(np); -+ return 0; -+ } else { -+ return -ENODEV; -+ } - case BCM63XX_FLASH_TYPE_NAND: - pr_warn("unsupported NAND flash detected\n"); - return -ENODEV; ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h -@@ -709,6 +709,7 @@ - #define GPIO_STRAPBUS_REG 0x40 - #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1) - #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1) -+#define STRAPBUS_6368_SPI_CLK_FAST (1 << 6) - #define STRAPBUS_6368_BOOT_SEL_MASK 0x3 - #define STRAPBUS_6368_BOOT_SEL_NAND 0 - #define STRAPBUS_6368_BOOT_SEL_SERIAL 1 -@@ -1565,6 +1566,7 @@ - #define IDDQ_CTRL_63268_USBH (1 << 4) - - #define MISC_STRAPBUS_6328_REG 0x240 -+#define STRAPBUS_6328_HSSPI_CLK_FAST (1 << 4) - #define STRAPBUS_6328_FCVO_SHIFT 7 - #define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT) - #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28) diff --git a/target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch deleted file mode 100644 index 16d47b4c58..0000000000 --- a/target/linux/bcm63xx/patches-4.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Thu, 3 May 2012 14:40:03 +0200 -Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 9 ++++++++- - arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 10 ++++++++++ - 2 files changed, 18 insertions(+), 1 deletion(-) - ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -31,6 +31,7 @@ - #include - #include - #include -+#include - - #include "board_common.h" - -@@ -177,6 +178,7 @@ static struct of_device_id of_ids[] = { - int __init board_register_devices(void) - { - int usbh_ports = 0; -+ int i; - - #if CONFIG_OF - if (of_have_populated_dt()) { -@@ -241,6 +243,10 @@ int __init board_register_devices(void) - board.ephy_reset_gpio_flags); - } - -+ /* register any fixups */ -+ for (i = 0; i < board.has_caldata; i++) -+ pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset); -+ - return 0; - } - ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -9,6 +9,7 @@ - #include - #include - #include -+#include - - /* - * flash mapping -@@ -16,6 +17,11 @@ - #define BCM963XX_CFE_VERSION_OFFSET 0x570 - #define BCM963XX_NVRAM_OFFSET 0x580 - -+struct ath9k_caldata { -+ unsigned int slot; -+ u32 caldata_offset; -+}; -+ - /* - * board definition - */ -@@ -33,6 +39,10 @@ struct board_info { - unsigned int has_ehci0:1; - unsigned int has_usbd:1; - unsigned int use_fallback_sprom:1; -+ unsigned int has_caldata:2; -+ -+ /* wifi calibration data config */ -+ struct ath9k_caldata caldata[2]; - - /* ethernet config */ - struct bcm63xx_enet_platform_data enet0; diff --git a/target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch deleted file mode 100644 index 9fbfae4a06..0000000000 --- a/target/linux/bcm63xx/patches-4.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch +++ /dev/null @@ -1,31 +0,0 @@ -From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Mon, 13 Jan 2014 12:12:30 +0100 -Subject: [PATCH] MIPS: BCM63XX: export the attached flash type - -Signed-off-by: Jonas Gorski ---- - arch/mips/bcm63xx/dev-flash.c | 5 +++++ - arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++ - 2 files changed, 7 insertions(+) - ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -270,3 +270,8 @@ int __init bcm63xx_flash_register(void) - return -ENODEV; - } - } -+ -+int bcm63xx_flash_get_type(void) -+{ -+ return flash_type; -+} ---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h -+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h -@@ -14,4 +14,6 @@ void bcm63xx_flash_force_phys_base_addre - - int __init bcm63xx_flash_register(void); - -+int bcm63xx_flash_get_type(void); -+ - #endif /* __BCM63XX_FLASH_H */ diff --git a/target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch deleted file mode 100644 index c9d2ee1791..0000000000 --- a/target/linux/bcm63xx/patches-4.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch +++ /dev/null @@ -1,237 +0,0 @@ -From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Thu, 3 May 2012 14:36:11 +0200 -Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices - ---- - arch/mips/bcm63xx/Makefile | 3 +- - arch/mips/bcm63xx/pci-ath9k-fixup.c | 190 ++++++++++++++++++++ - .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h | 7 + - 3 files changed, 199 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h - ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -3,7 +3,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o - setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ - dev-rng.o dev-wdt.o \ - dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \ -- sprom.o -+ pci-ath9k-fixup.o sprom.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- /dev/null -+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c -@@ -0,0 +1,200 @@ -+/* -+ * Broadcom BCM63XX Ath9k EEPROM fixup helper. -+ * -+ * Copytight (C) 2012 Jonas Gorski -+ * -+ * Based on -+ * -+ * Atheros AP94 reference board PCI initialization -+ * -+ * Copyright (C) 2009-2010 Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define bcm_hsspi_writel(v, o) bcm_rset_writel(RSET_HSSPI, (v), (o)) -+ -+struct ath9k_fixup { -+ unsigned slot; -+ u8 mac[ETH_ALEN]; -+ struct ath9k_platform_data pdata; -+}; -+ -+static int ath9k_num_fixups; -+static struct ath9k_fixup ath9k_fixups[2] = { -+ { -+ .slot = 255, -+ .pdata = { -+ .led_pin = -1, -+ }, -+ }, -+ { -+ .slot = 255, -+ .pdata = { -+ .led_pin = -1, -+ }, -+ }, -+}; -+ -+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset) -+{ -+ u32 addr; -+ -+ if (BCMCPU_IS_6328()) { -+ addr = 0x18000000; -+ } else { -+ addr = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ addr &= MPI_CSBASE_BASE_MASK; -+ } -+ -+ switch (bcm63xx_flash_get_type()) { -+ case BCM63XX_FLASH_TYPE_PARALLEL: -+ memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16)); -+ return eeprom; -+ case BCM63XX_FLASH_TYPE_SERIAL: -+ /* the first megabyte is memory mapped */ -+ if (offset < 0x100000) { -+ memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16)); -+ return eeprom; -+ } -+ -+ if (BCMCPU_IS_6328()) { -+ /* we can change the memory mapped megabyte */ -+ bcm_hsspi_writel(offset & 0xf00000, 0x18); -+ memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16)); -+ bcm_hsspi_writel(0, 0x18); -+ return eeprom; -+ } -+ /* can't do anything here without talking to the SPI controller. */ -+ case BCM63XX_FLASH_TYPE_NAND: -+ default: -+ return NULL; -+ } -+} -+ -+static void ath9k_pci_fixup(struct pci_dev *dev) -+{ -+ void __iomem *mem; -+ struct ath9k_platform_data *pdata = NULL; -+ struct pci_dev *bridge = pci_upstream_bridge(dev); -+ u16 *cal_data = NULL; -+ u16 cmd; -+ u32 bar0; -+ u32 val; -+ unsigned i; -+ -+ for (i = 0; i < ath9k_num_fixups; i++) { -+ if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn)) -+ continue; -+ -+ cal_data = ath9k_fixups[i].pdata.eeprom_data; -+ pdata = &ath9k_fixups[i].pdata; -+ break; -+ } -+ -+ if (cal_data == NULL) -+ return; -+ -+ if (*cal_data != 0xa55a) { -+ pr_err("pci %s: invalid calibration data\n", pci_name(dev)); -+ return; -+ } -+ -+ pr_info("pci %s: fixup device configuration\n", pci_name(dev)); -+ -+ switch (bcm63xx_get_cpu_id()) { -+ case BCM6328_CPU_ID: -+ val = BCM_PCIE_MEM_BASE_PA_6328; -+ break; -+ case BCM6348_CPU_ID: -+ case BCM6358_CPU_ID: -+ case BCM6368_CPU_ID: -+ val = BCM_PCI_MEM_BASE_PA; -+ break; -+ default: -+ BUG(); -+ } -+ -+ mem = ioremap(val, 0x10000); -+ if (!mem) { -+ pr_err("pci %s: ioremap error\n", pci_name(dev)); -+ return; -+ } -+ -+ if (bridge) -+ pci_enable_device(bridge); -+ -+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); -+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val); -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ /* set offset to first reg address */ -+ cal_data += 3; -+ while(*cal_data != 0xffff) { -+ u32 reg; -+ reg = *cal_data++; -+ val = *cal_data++; -+ val |= (*cal_data++) << 16; -+ -+ writel(val, mem + reg); -+ udelay(100); -+ } -+ -+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val); -+ dev->vendor = val & 0xffff; -+ dev->device = (val >> 16) & 0xffff; -+ -+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); -+ dev->revision = val & 0xff; -+ dev->class = val >> 8; /* upper 3 bytes */ -+ -+ pci_read_config_word(dev, PCI_COMMAND, &cmd); -+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); -+ pci_write_config_word(dev, PCI_COMMAND, cmd); -+ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); -+ -+ if (bridge) -+ pci_disable_device(bridge); -+ -+ iounmap(mem); -+ -+ dev->dev.platform_data = pdata; -+} -+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); -+ -+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset) -+{ -+ if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) -+ return; -+ -+ ath9k_fixups[ath9k_num_fixups].slot = slot; -+ -+ if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset)) -+ return; -+ -+ if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac)) -+ return; -+ -+ ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac; -+ ath9k_num_fixups++; -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h -@@ -0,0 +1,7 @@ -+#ifndef _PCI_ATH9K_FIXUP -+#define _PCI_ATH9K_FIXUP -+ -+ -+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init; -+ -+#endif /* _PCI_ATH9K_FIXUP */ diff --git a/target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch deleted file mode 100644 index 2076879ed6..0000000000 --- a/target/linux/bcm63xx/patches-4.14/420-BCM63XX-add-endian-check-for-ath9k.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h -+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h -@@ -2,6 +2,7 @@ - #define _PCI_ATH9K_FIXUP - - --void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init; -+void pci_enable_ath9k_fixup(unsigned slot, u32 offset, -+ unsigned endian_check) __init; - - #endif /* _PCI_ATH9K_FIXUP */ ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -20,6 +20,7 @@ - struct ath9k_caldata { - unsigned int slot; - u32 caldata_offset; -+ unsigned int endian_check:1; - }; - - /* ---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c -+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c -@@ -182,12 +182,14 @@ static void ath9k_pci_fixup(struct pci_d - } - DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); - --void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset) -+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset, -+ unsigned endian_check) - { - if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) - return; - - ath9k_fixups[ath9k_num_fixups].slot = slot; -+ ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check; - - if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset)) - return; ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -245,7 +245,8 @@ int __init board_register_devices(void) - - /* register any fixups */ - for (i = 0; i < board.has_caldata; i++) -- pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset); -+ pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset, -+ board.caldata[i].endian_check); - - return 0; - } diff --git a/target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch deleted file mode 100644 index bb111dc9de..0000000000 --- a/target/linux/bcm63xx/patches-4.14/421-BCM63XX-add-led-pin-for-ath9k.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -246,7 +246,7 @@ int __init board_register_devices(void) - /* register any fixups */ - for (i = 0; i < board.has_caldata; i++) - pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset, -- board.caldata[i].endian_check); -+ board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high); - - return 0; - } ---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c -+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c -@@ -183,13 +183,15 @@ static void ath9k_pci_fixup(struct pci_d - DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup); - - void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset, -- unsigned endian_check) -+ unsigned endian_check, int led_pin, bool led_active_high) - { - if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups)) - return; - - ath9k_fixups[ath9k_num_fixups].slot = slot; - ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check; -+ ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin; -+ ath9k_fixups[ath9k_num_fixups].pdata.led_active_high = led_active_high; - - if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset)) - return; ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -21,6 +21,8 @@ struct ath9k_caldata { - unsigned int slot; - u32 caldata_offset; - unsigned int endian_check:1; -+ int led_pin; -+ bool led_active_high; - }; - - /* ---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h -+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h -@@ -3,6 +3,6 @@ - - - void pci_enable_ath9k_fixup(unsigned slot, u32 offset, -- unsigned endian_check) __init; -+ unsigned endian_check, int led_pin, bool led_active_high) __init; - - #endif /* _PCI_ATH9K_FIXUP */ diff --git a/target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch deleted file mode 100644 index cc980a14d4..0000000000 --- a/target/linux/bcm63xx/patches-4.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch +++ /dev/null @@ -1,185 +0,0 @@ -From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Mon, 7 Jan 2013 17:45:39 +0100 -Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices - ---- - arch/mips/bcm63xx/Makefile | 2 +- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 17 ++++- - arch/mips/bcm63xx/dev-flash.c | 2 +- - arch/mips/bcm63xx/pci-rt2x00-fixup.c | 71 ++++++++++++++++++++ - .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 +- - .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 9 ++- - .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h | 9 +++ - 7 files changed, 104 insertions(+), 8 deletions(-) - create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c - create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h - ---- a/arch/mips/bcm63xx/Makefile -+++ b/arch/mips/bcm63xx/Makefile -@@ -3,7 +3,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o - setup.o timer.o dev-enet.o dev-flash.o dev-pcmcia.o \ - dev-rng.o dev-wdt.o \ - dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o \ -- pci-ath9k-fixup.o sprom.o -+ pci-ath9k-fixup.o pci-rt2x00-fixup.o sprom.o - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - - obj-y += boards/ ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -32,6 +32,7 @@ - #include - #include - #include -+#include - - #include "board_common.h" - -@@ -244,9 +245,19 @@ int __init board_register_devices(void) - } - - /* register any fixups */ -- for (i = 0; i < board.has_caldata; i++) -- pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset, -- board.caldata[i].endian_check, board.caldata[i].led_pin, board.caldata[i].led_active_high); -+ for (i = 0; i < board.has_caldata; i++) { -+ switch (board.caldata[i].vendor) { -+ case PCI_VENDOR_ID_ATHEROS: -+ pci_enable_ath9k_fixup(board.caldata[i].slot, -+ board.caldata[i].caldata_offset, board.caldata[i].endian_check, -+ board.caldata[i].led_pin, board.caldata[i].led_active_high); -+ break; -+ case PCI_VENDOR_ID_RALINK: -+ pci_enable_rt2x00_fixup(board.caldata[i].slot, -+ board.caldata[i].eeprom); -+ break; -+ } -+ } - - return 0; - } ---- /dev/null -+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c -@@ -0,0 +1,72 @@ -+/* -+ * Broadcom BCM63XX RT2x00 EEPROM fixup helper. -+ * -+ * Copyright (C) 2012 Álvaro Fernández Rojas -+ * -+ * Based on -+ * -+ * Broadcom BCM63XX Ath9k EEPROM fixup helper. -+ * -+ * Copyright (C) 2012 Jonas Gorski -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+struct rt2x00_fixup { -+ unsigned slot; -+ u8 mac[ETH_ALEN]; -+ struct rt2x00_platform_data pdata; -+}; -+ -+static int rt2x00_num_fixups; -+static struct rt2x00_fixup rt2x00_fixups[2] = { -+ { -+ .slot = 255, -+ }, -+ { -+ .slot = 255, -+ }, -+}; -+ -+static void rt2x00_pci_fixup(struct pci_dev *dev) -+{ -+ unsigned i; -+ struct rt2x00_platform_data *pdata = NULL; -+ -+ for (i = 0; i < rt2x00_num_fixups; i++) { -+ if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn)) -+ continue; -+ -+ pdata = &rt2x00_fixups[i].pdata; -+ break; -+ } -+ -+ dev->dev.platform_data = pdata; -+} -+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup); -+ -+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) -+{ -+ if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups)) -+ return; -+ -+ rt2x00_fixups[rt2x00_num_fixups].slot = slot; -+ rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL); -+ -+ if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac)) -+ return; -+ -+ rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac; -+ rt2x00_num_fixups++; -+} -+ ---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h -@@ -10,6 +10,7 @@ - #include - #include - #include -+#include - - /* - * flash mapping -@@ -17,12 +18,16 @@ - #define BCM963XX_CFE_VERSION_OFFSET 0x570 - #define BCM963XX_NVRAM_OFFSET 0x580 - --struct ath9k_caldata { -+struct bcm63xx_caldata { -+ unsigned int vendor; - unsigned int slot; - u32 caldata_offset; -+ /* Atheros */ - unsigned int endian_check:1; - int led_pin; - bool led_active_high; -+ /* Ralink */ -+ char* eeprom; - }; - - /* -@@ -45,7 +50,7 @@ struct board_info { - unsigned int has_caldata:2; - - /* wifi calibration data config */ -- struct ath9k_caldata caldata[2]; -+ struct bcm63xx_caldata caldata[2]; - - /* ethernet config */ - struct bcm63xx_enet_platform_data enet0; ---- /dev/null -+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h -@@ -0,0 +1,9 @@ -+#ifndef _PCI_RT2X00_FIXUP -+#define _PCI_RT2X00_FIXUP -+ -+#define PCI_VENDOR_ID_RALINK 0x1814 -+ -+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init; -+ -+#endif /* _PCI_RT2X00_FIXUP */ -+ diff --git a/target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch deleted file mode 100644 index 58f1b13d38..0000000000 --- a/target/linux/bcm63xx/patches-4.14/423-bcm63xx_enet_add_b53_support.patch +++ /dev/null @@ -1,169 +0,0 @@ ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h -@@ -332,6 +332,9 @@ struct bcm_enet_priv { - struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT]; - int sw_port_link[ENETSW_MAX_PORT]; - -+ /* platform device for associated switch */ -+ struct platform_device *b53_device; -+ - /* used to poll switch port state */ - struct timer_list swphy_poll; - spinlock_t enetsw_mdio_lock; ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -30,6 +30,7 @@ - #include - #include - #include -+#include - - #include - #include "bcm63xx_enet.h" -@@ -1937,7 +1938,8 @@ static int bcm_enet_remove(struct platfo - return 0; - } - --struct platform_driver bcm63xx_enet_driver = { -+ -+static struct platform_driver bcm63xx_enet_driver = { - .probe = bcm_enet_probe, - .remove = bcm_enet_remove, - .driver = { -@@ -1946,6 +1948,42 @@ struct platform_driver bcm63xx_enet_driv - }, - }; - -+struct b53_platform_data bcm63xx_b53_pdata = { -+ .chip_id = 0x6300, -+ .big_endian = 1, -+}; -+ -+struct platform_device bcm63xx_b53_dev = { -+ .name = "b53-switch", -+ .id = -1, -+ .dev = { -+ .platform_data = &bcm63xx_b53_pdata, -+ }, -+}; -+ -+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask) -+{ -+ int ret; -+ -+ bcm63xx_b53_pdata.regs = priv->base; -+ bcm63xx_b53_pdata.enabled_ports = port_mask; -+ bcm63xx_b53_pdata.alias = priv->net_dev->name; -+ -+ ret = platform_device_register(&bcm63xx_b53_dev); -+ if (!ret) -+ priv->b53_device = &bcm63xx_b53_dev; -+ -+ return ret; -+} -+ -+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv) -+{ -+ if (priv->b53_device) -+ platform_device_unregister(&bcm63xx_b53_dev); -+ -+ priv->b53_device = NULL; -+} -+ - /* - * switch mii access callbacks - */ -@@ -2204,29 +2242,6 @@ static int bcm_enetsw_open(struct net_de - enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i)); - } - -- /* reset mib */ -- val = enetsw_readb(priv, ENETSW_GMCR_REG); -- val |= ENETSW_GMCR_RST_MIB_MASK; -- enetsw_writeb(priv, val, ENETSW_GMCR_REG); -- mdelay(1); -- val &= ~ENETSW_GMCR_RST_MIB_MASK; -- enetsw_writeb(priv, val, ENETSW_GMCR_REG); -- mdelay(1); -- -- /* force CPU port state */ -- val = enetsw_readb(priv, ENETSW_IMPOV_REG); -- val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK; -- enetsw_writeb(priv, val, ENETSW_IMPOV_REG); -- -- /* enable switch forward engine */ -- val = enetsw_readb(priv, ENETSW_SWMODE_REG); -- val |= ENETSW_SWMODE_FWD_EN_MASK; -- enetsw_writeb(priv, val, ENETSW_SWMODE_REG); -- -- /* enable jumbo on all ports */ -- enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG); -- enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG); -- - /* initialize flow control buffer allocation */ - enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0, - ENETDMA_BUFALLOC_REG(priv->rx_chan)); -@@ -2685,6 +2700,9 @@ static int bcm_enetsw_probe(struct platf - struct bcm63xx_enetsw_platform_data *pd; - struct resource *res_mem; - int ret, irq_rx, irq_tx; -+ unsigned i, num_ports = 0; -+ u16 port_mask = BIT(8); -+ u8 val; - - if (!bcm_enet_shared_base[0]) - return -EPROBE_DEFER; -@@ -2767,6 +2785,43 @@ static int bcm_enetsw_probe(struct platf - priv->pdev = pdev; - priv->net_dev = dev; - -+ /* reset mib */ -+ val = enetsw_readb(priv, ENETSW_GMCR_REG); -+ val |= ENETSW_GMCR_RST_MIB_MASK; -+ enetsw_writeb(priv, val, ENETSW_GMCR_REG); -+ mdelay(1); -+ val &= ~ENETSW_GMCR_RST_MIB_MASK; -+ enetsw_writeb(priv, val, ENETSW_GMCR_REG); -+ mdelay(1); -+ -+ /* force CPU port state */ -+ val = enetsw_readb(priv, ENETSW_IMPOV_REG); -+ val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK; -+ enetsw_writeb(priv, val, ENETSW_IMPOV_REG); -+ -+ /* enable switch forward engine */ -+ val = enetsw_readb(priv, ENETSW_SWMODE_REG); -+ val |= ENETSW_SWMODE_FWD_EN_MASK; -+ enetsw_writeb(priv, val, ENETSW_SWMODE_REG); -+ -+ /* enable jumbo on all ports */ -+ enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG); -+ enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG); -+ -+ for (i = 0; i < priv->num_ports; i++) { -+ struct bcm63xx_enetsw_port *port = &priv->used_ports[i]; -+ -+ if (!port->used) -+ continue; -+ -+ num_ports++; -+ port_mask |= BIT(i); -+ } -+ -+ /* only register if there is more than one external port */ -+ if (num_ports > 1) -+ bcmenet_switch_register(priv, port_mask); -+ - return 0; - - out_disable_clk: -@@ -2788,6 +2843,9 @@ static int bcm_enetsw_remove(struct plat - priv = netdev_priv(dev); - unregister_netdev(dev); - -+ /* remove switch */ -+ bcmenet_switch_unregister(priv); -+ - clk_disable_unprepare(priv->mac_clk); - - free_netdev(dev); diff --git a/target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch deleted file mode 100644 index 6235c8cad6..0000000000 --- a/target/linux/bcm63xx/patches-4.14/424-bcm63xx_enet_no_request_mem_region.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -2744,9 +2744,9 @@ static int bcm_enetsw_probe(struct platf - if (ret) - goto out; - -- priv->base = devm_ioremap_resource(&pdev->dev, res_mem); -- if (IS_ERR(priv->base)) { -- ret = PTR_ERR(priv->base); -+ priv->base = devm_ioremap(&pdev->dev, res_mem->start, resource_size(res_mem)); -+ if (priv->base == NULL) { -+ ret = -ENOMEM; - goto out; - } - diff --git a/target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch b/target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch deleted file mode 100644 index 4b206a259e..0000000000 --- a/target/linux/bcm63xx/patches-4.14/427-boards_probe_switch.patch +++ /dev/null @@ -1,119 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -77,6 +77,8 @@ static struct board_info __initdata boar - - .has_enet0 = 1, - .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -90,6 +92,8 @@ static struct board_info __initdata boar - - .has_enet0 = 1, - .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -138,6 +142,8 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -162,6 +168,8 @@ static struct board_info __initdata boar - }, - - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -186,6 +194,8 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -208,6 +218,8 @@ static struct board_info __initdata boar - }, - - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -231,6 +243,8 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -252,6 +266,8 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -271,6 +287,8 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -298,6 +316,8 @@ static struct board_info __initdata boar - }, - - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -323,6 +343,8 @@ static struct board_info __initdata boar - }, - - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -348,6 +370,8 @@ static struct board_info __initdata boar - }, - - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -@@ -371,6 +395,8 @@ static struct board_info __initdata boar - }, - - .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, - .force_speed_100 = 1, - .force_duplex_full = 1, - }, diff --git a/target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch b/target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch deleted file mode 100644 index dd63183a08..0000000000 --- a/target/linux/bcm63xx/patches-4.14/499-allow_better_context_for_board_patches.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -46,7 +46,7 @@ static struct board_info __initdata boar - .ephy_reset_gpio = 36, - .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, - }; --#endif -+#endif /* CONFIG_BCM63XX_CPU_3368 */ - - /* - * known 6328 boards -@@ -65,7 +65,7 @@ static struct board_info __initdata boar - .port_no = 0, - }, - }; --#endif -+#endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* - * known 6338 boards -@@ -98,7 +98,7 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; --#endif -+#endif /* CONFIG_BCM63XX_CPU_6338 */ - - /* - * known 6345 boards -@@ -108,7 +108,7 @@ static struct board_info __initdata boar - .name = "96345GW2", - .expected_cpu_id = 0x6345, - }; --#endif -+#endif /* CONFIG_BCM63XX_CPU_6345 */ - - /* - * known 6348 boards -@@ -295,7 +295,7 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; --#endif -+#endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* - * known 6358 boards -@@ -403,7 +403,7 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; --#endif -+#endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* - * all boards diff --git a/target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch b/target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch deleted file mode 100644 index 456b2a4466..0000000000 --- a/target/linux/bcm63xx/patches-4.14/500-board-D4PW.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -295,6 +295,21 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+static struct board_info __initdata board_96348_D4PW = { -+ .name = "D-4P-W", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -431,6 +446,7 @@ static const struct board_info __initcon - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -+ &board_96348_D4PW, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -462,6 +478,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-4.14/501-board-NB4.patch b/target/linux/bcm63xx/patches-4.14/501-board-NB4.patch deleted file mode 100644 index 41c8a7e862..0000000000 --- a/target/linux/bcm63xx/patches-4.14/501-board-NB4.patch +++ /dev/null @@ -1,81 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -418,6 +418,60 @@ static struct board_info __initdata boar - - .has_ohci0 = 1, - }; -+ -+static struct board_info __initdata board_nb4_ser_r0 = { -+ .name = "NB4-SER-r0", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+}; -+ -+static struct board_info __initdata board_nb4_fxc_r1 = { -+ .name = "NB4-FXC-r1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -454,6 +508,8 @@ static const struct board_info __initcon - &board_96358vw2, - &board_AGPFS0, - &board_DWVS0, -+ &board_nb4_ser_r0, -+ &board_nb4_fxc_r1, - #endif - }; - -@@ -495,6 +551,8 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, -+ { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, -+ { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6368 - #endif diff --git a/target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch b/target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch deleted file mode 100644 index 69cc716e1a..0000000000 --- a/target/linux/bcm63xx/patches-4.14/502-board-96338W2_E7T.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -98,6 +98,20 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_96338w2_e7t = { -+ .name = "96338W2_E7T", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6338 */ - - /* -@@ -487,6 +501,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, - &board_96338w, -+ &board_96338w2_e7t, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -@@ -524,6 +539,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, - { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, -+ { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, diff --git a/target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch b/target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch deleted file mode 100644 index 9e3c4e0081..0000000000 --- a/target/linux/bcm63xx/patches-4.14/503-board-CPVA642.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -385,6 +385,25 @@ static struct board_info __initdata boar - .num_usbh_ports = 2, - }; - -+static struct board_info __initdata board_CPVA642 = { -+ .name = "CPVA642", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+}; -+ -+ - static struct board_info __initdata board_AGPFS0 = { - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, -@@ -522,6 +541,7 @@ static const struct board_info __initcon - &board_96358vw, - &board_96358vw2, - &board_AGPFS0, -+ &board_CPVA642, - &board_DWVS0, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -@@ -569,6 +589,7 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, - { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, -+ { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6368 - #endif diff --git a/target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch b/target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch deleted file mode 100644 index e78832ecb2..0000000000 --- a/target/linux/bcm63xx/patches-4.14/504-board_dsl_274xb_rev_c.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -452,6 +452,22 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+/* D-Link DSL-274xB revison C2/C3 */ -+static struct board_info __initdata board_dsl_274xb_rev_c = { -+ .name = "AW4139", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_nb4_ser_r0 = { - .name = "NB4-SER-r0", - .expected_cpu_id = 0x6358, -@@ -543,6 +559,7 @@ static const struct board_info __initcon - &board_AGPFS0, - &board_CPVA642, - &board_DWVS0, -+ &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - #endif -@@ -582,6 +599,7 @@ static struct of_device_id const bcm963x - { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, - { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, -+ { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch b/target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch deleted file mode 100644 index f5ca73d7e2..0000000000 --- a/target/linux/bcm63xx/patches-4.14/505-board_spw500v.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -324,6 +324,36 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct sprom_fixup __initdata spw500v_fixups[] = { -+ { .offset = 46, .value = 0x3046 }, -+ { .offset = 47, .value = 0x15a7 }, -+ { .offset = 48, .value = 0xfa89 }, -+ { .offset = 49, .value = 0xfe79 }, -+ { .offset = 57, .value = 0x6a49 }, -+}; -+ -+static struct board_info __initdata board_spw500v = { -+ .name = "SPW500V", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 1, -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = spw500v_fixups, -+ .num_board_fixups = ARRAY_SIZE(spw500v_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -551,6 +581,7 @@ static const struct board_info __initcon - &board_96348gw_a, - &board_rta1025w_16, - &board_96348_D4PW, -+ &board_spw500v, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -592,6 +623,7 @@ static struct of_device_id const bcm963x - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, -+ { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif diff --git a/target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch b/target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch deleted file mode 100644 index 77948d19fc..0000000000 --- a/target/linux/bcm63xx/patches-4.14/506-board_gw6200_gw6000.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -217,6 +217,48 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+static struct board_info __initdata board_gw6200 = { -+ .name = "GW6200", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+}; -+ -+static struct board_info __initdata board_gw6000 = { -+ .name = "GW6000", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+}; -+ -+ -+ - static struct board_info __initdata board_FAST2404 = { - .name = "F@ST2404", - .expected_cpu_id = 0x6348, -@@ -574,6 +616,8 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, - &board_96348gw, -+ &board_gw6000, -+ &board_gw6200, - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, -@@ -624,6 +668,8 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, -+ { .compatible = "tecom,gw6000", .data = &board_gw6000, }, -+ { .compatible = "tecom,gw6200", .data = &board_gw6200, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif diff --git a/target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch b/target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch deleted file mode 100644 index 3a88e01005..0000000000 --- a/target/linux/bcm63xx/patches-4.14/507-board-MAGIC.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -396,6 +396,31 @@ static struct board_info __initdata boar - .num_board_fixups = ARRAY_SIZE(spw500v_fixups), - }, - }; -+ -+static struct board_info __initdata board_96348sv = { -+ .name = "MAGIC", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ /* it has BP_ENET_EXTERNAL_PHY */ -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -626,6 +651,7 @@ static const struct board_info __initcon - &board_rta1025w_16, - &board_96348_D4PW, - &board_spw500v, -+ &board_96348sv, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -670,6 +696,7 @@ static struct of_device_id const bcm963x - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, -+ { .compatible = "telsey,magic", .data = &board_96348sv, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, - #endif diff --git a/target/linux/bcm63xx/patches-4.14/508-board_hw553.patch b/target/linux/bcm63xx/patches-4.14/508-board_hw553.patch deleted file mode 100644 index e6e94f71ff..0000000000 --- a/target/linux/bcm63xx/patches-4.14/508-board_hw553.patch +++ /dev/null @@ -1,51 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -618,6 +618,32 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - .num_usbh_ports = 2, - }; -+ -+static struct board_info __initdata board_HW553 = { -+ .name = "HW553", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -663,6 +689,7 @@ static const struct board_info __initcon - &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -+ &board_HW553, - #endif - }; - -@@ -706,6 +733,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, -+ { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch b/target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch deleted file mode 100644 index cfe55552f3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/509-board_rta1320_16m.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -112,6 +112,20 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+static struct board_info __initdata board_rta1320_16m = { -+ .name = "RTA1320_16M", -+ .expected_cpu_id = 0x6338, -+ -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6338 */ - - /* -@@ -660,6 +674,7 @@ static const struct board_info __initcon - &board_96338gw, - &board_96338w, - &board_96338w2_e7t, -+ &board_rta1320_16m, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -@@ -704,6 +719,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, - { .compatible = "brcm,bcm96338w", .data = &board_96338w, }, -+ { .compatible = "dynalink,rta1320", .data = &board_rta1320_16m, }, - { .compatible = "d-link,dsl-2640u", .data = &board_96338w2_e7t, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 diff --git a/target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch b/target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch deleted file mode 100644 index 69432c94dc..0000000000 --- a/target/linux/bcm63xx/patches-4.14/510-board_spw303v.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -658,6 +658,20 @@ static struct board_info __initdata boar - .pci_dev = 1, - }, - }; -+ -+ /* T-Home Speedport W 303V Typ B */ -+static struct board_info __initdata board_spw303v = { -+ .name = "96358-502V", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet0 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -705,6 +719,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_HW553, -+ &board_spw303v, - #endif - }; - -@@ -756,6 +771,7 @@ static struct of_device_id const bcm963x - { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, }, - { .compatible = "sfr,neufbox-4-sercomm-r0", .data = &board_nb4_ser_r0, }, - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, -+ { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6368 diff --git a/target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch b/target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch deleted file mode 100644 index c77eb00bff..0000000000 --- a/target/linux/bcm63xx/patches-4.14/511-board_V2500V.patch +++ /dev/null @@ -1,92 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -435,6 +435,26 @@ static struct board_info __initdata boar - .has_pccard = 1, - .has_ehci0 = 1, - }; -+ -+static struct board_info __initdata board_V2500V_BB = { -+ .name = "V2500V_BB", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6348 */ - - /* -@@ -707,6 +727,7 @@ static const struct board_info __initcon - &board_96348_D4PW, - &board_spw500v, - &board_96348sv, -+ &board_V2500V_BB, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -746,6 +767,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, -@@ -805,6 +827,22 @@ void __init board_bcm963xx_init(void) - val &= MPI_CSBASE_BASE_MASK; - } - boot_addr = (u8 *)KSEG1ADDR(val); -+ pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr); -+ -+ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */ -+ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/ -+ /* Loading firmware from the CFE Prompt always loads to Bank 0 */ -+ /* Do an early check of CFE and then select bank 0 */ -+ -+ if (boot_addr == (u8 *)0xbf800000) { -+ u8 *tmp_boot_addr = (u8*)0xbfc00000; -+ -+ bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET); -+ if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) { -+ pr_info("V2500V: nvram bank 0\n"); -+ boot_addr = tmp_boot_addr; -+ } -+ } - - /* dump cfe version */ - cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; ---- a/arch/mips/bcm63xx/dev-flash.c -+++ b/arch/mips/bcm63xx/dev-flash.c -@@ -21,6 +21,7 @@ - #include - #include - -+#include - #include - #include - #include -@@ -247,6 +248,13 @@ int __init bcm63xx_flash_register(void) - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - -+ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */ -+ /* Loading from CFE always uses Bank 0 */ -+ if (!strcmp(board_get_name(), "V2500V_BB")) { -+ pr_info("V2500V: Start in Bank 0\n"); -+ val = val + 0x400000; // Select Bank 0 start address -+ } -+ - mtd_resources[0].start = val; - mtd_resources[0].end = 0x1FFFFFFF; - } diff --git a/target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch b/target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch deleted file mode 100644 index 4c14ea4413..0000000000 --- a/target/linux/bcm63xx/patches-4.14/512-board_BTV2110.patch +++ /dev/null @@ -1,43 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -208,6 +208,24 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+ -+/* BT Voyager 2110 */ -+static struct board_info __initdata board_V2110 = { -+ .name = "V2110", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -728,6 +746,7 @@ static const struct board_info __initcon - &board_spw500v, - &board_96348sv, - &board_V2500V_BB, -+ &board_V2110, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -767,6 +786,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, }, - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, -+ { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, diff --git a/target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch b/target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch deleted file mode 100644 index f98e19da3f..0000000000 --- a/target/linux/bcm63xx/patches-4.14/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch +++ /dev/null @@ -1,215 +0,0 @@ -From e796582b499f0ba6acaa1ac3a10c09cceaab7702 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 9 Mar 2014 04:55:52 +0100 -Subject: [PATCH] MIPS: BCM63XX: add inventel Livebox support - ---- - arch/mips/bcm63xx/boards/Kconfig | 6 + - arch/mips/bcm63xx/boards/Makefile | 1 + - arch/mips/bcm63xx/boards/board_common.c | 2 +- - arch/mips/bcm63xx/boards/board_common.h | 6 + - arch/mips/bcm63xx/boards/board_livebox.c | 215 ++++++++++++++++++++++++++++++ - 5 files changed, 229 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/bcm63xx/boards/board_livebox.c - ---- a/arch/mips/bcm63xx/boards/Kconfig -+++ b/arch/mips/bcm63xx/boards/Kconfig -@@ -13,4 +13,10 @@ config BOARD_BCM963XX - default y - help - -+config BOARD_LIVEBOX -+ bool "Inventel Livebox(es) boards" -+ select SSB -+ help -+ Inventel Livebox boards using the RedBoot bootloader. -+ - endmenu ---- a/arch/mips/bcm63xx/boards/Makefile -+++ b/arch/mips/bcm63xx/boards/Makefile -@@ -1,2 +1,3 @@ - obj-y += board_common.o - obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o -+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -54,7 +54,7 @@ void __init board_prom_init(void) - if (fw_arg3 == CFE_EPTSEAL) - board_bcm963xx_init(); - else -- panic("unsupported bootloader detected"); -+ board_livebox_init(); - } - - static int (*board_get_mac_address)(u8 mac[ETH_ALEN]); ---- a/arch/mips/bcm63xx/boards/board_common.h -+++ b/arch/mips/bcm63xx/boards/board_common.h -@@ -24,4 +24,10 @@ static inline void board_of_device_prese - } - #endif - -+#if defined(CONFIG_BOARD_LIVEBOX) -+void board_livebox_init(void); -+#else -+static inline void board_livebox_init(void) { } -+#endif -+ - #endif /* __BOARD_COMMON_H */ ---- /dev/null -+++ b/arch/mips/bcm63xx/boards/board_livebox.c -@@ -0,0 +1,155 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Florian Fainelli -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "board_common.h" -+ -+#define PFX "board_livebox: " -+ -+static unsigned int mac_addr_used = 0; -+ -+/* -+ * known 6348 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6348 -+static struct board_info __initdata board_livebox_blue5g = { -+ .name = "Livebox-blue-5g", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 31, -+ }, -+ -+ .ephy_reset_gpio = 6, -+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+}; -+#endif -+ -+/* -+ * all boards -+ */ -+static const struct board_info __initdata *bcm963xx_boards[] = { -+#ifdef CONFIG_BCM63XX_CPU_6348 -+ &board_livebox_blue5g -+#endif -+}; -+ -+static struct of_device_id const livebox_boards_dt[] = { -+ { .compatible = "inventel,livebox-1", .data = &board_livebox_blue5g, }, -+ { } -+}; -+ -+/* -+ * register & return a new board mac address -+ */ -+static int livebox_get_mac_address(u8 *mac) -+{ -+ u8 *p; -+ int count; -+ -+ memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN); -+ -+ p = mac + ETH_ALEN - 1; -+ count = mac_addr_used; -+ -+ while (count--) { -+ do { -+ (*p)++; -+ if (*p != 0) -+ break; -+ p--; -+ } while (p != mac); -+ } -+ -+ if (p == mac) { -+ printk(KERN_ERR PFX "unable to fetch mac address\n"); -+ return -ENODEV; -+ } -+ mac_addr_used++; -+ -+ return 0; -+} -+ -+/* -+ * early init callback -+ */ -+#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff -+#define LIVEBOX_BOOT_ADDR 0x1e400000 -+ -+#define LIVEBOX_HW_BLUE5G_9 0x90 -+ -+void __init board_livebox_init(void) -+{ -+ u32 val; -+ u8 hw_version; -+ const struct board_info *board; -+ const struct of_device_id *board_match; -+ -+ /* find board by compat */ -+ board_match = bcm63xx_match_board(livebox_boards_dt); -+ if (board_match) { -+ board = board_match->data; -+ } else { -+ /* Get hardware version */ -+ val = bcm_gpio_readl(GPIO_CTL_LO_REG); -+ val &= ~LIVEBOX_GPIO_DETECT_MASK; -+ bcm_gpio_writel(val, GPIO_CTL_LO_REG); -+ -+ hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG); -+ hw_version &= LIVEBOX_GPIO_DETECT_MASK; -+ -+ switch (hw_version) { -+ case LIVEBOX_HW_BLUE5G_9: -+ printk(KERN_INFO PFX "Livebox BLUE5G.9\n"); -+ board = bcm963xx_boards[0]; -+ break; -+ default: -+ printk(KERN_INFO PFX "Unknown livebox version: %02x\n", -+ hw_version); -+ /* use default livebox configuration */ -+ board = bcm963xx_boards[0]; -+ break; -+ } -+ } -+ -+ /* use default livebox configuration */ -+ board_early_setup(board, livebox_get_mac_address); -+ -+ /* read base address of boot chip select (0) */ -+ val = bcm_mpi_readl(MPI_CSBASE_REG(0)); -+ val &= MPI_CSBASE_BASE_MASK; -+ if (val != LIVEBOX_BOOT_ADDR) { -+ printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n", -+ val, LIVEBOX_BOOT_ADDR); -+ bcm63xx_flash_force_phys_base_address(LIVEBOX_BOOT_ADDR, 0x1ebfffff); -+ } -+} diff --git a/target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch b/target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch deleted file mode 100644 index acb533d0e8..0000000000 --- a/target/linux/bcm63xx/patches-4.14/514-board_ct536_ct5621.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -226,6 +226,33 @@ static struct board_info __initdata boar - }; - - -+static struct board_info __initdata board_ct536_ct5621 = { -+ .name = "CT536_CT5621", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 0, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -747,6 +774,7 @@ static const struct board_info __initcon - &board_96348sv, - &board_V2500V_BB, - &board_V2110, -+ &board_ct536_ct5621, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -788,6 +816,8 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, }, - { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, -+ { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, -+ { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, diff --git a/target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch b/target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch deleted file mode 100644 index 9ccb29bddd..0000000000 --- a/target/linux/bcm63xx/patches-4.14/515-board_DWV-S0_fixes.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -626,6 +626,7 @@ static struct board_info __initdata boar - }, - - .has_ohci0 = 1, -+ .has_ehci0 = 1, - }; - - /* D-Link DSL-274xB revison C2/C3 */ diff --git a/target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch b/target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch deleted file mode 100644 index a6de00d36b..0000000000 --- a/target/linux/bcm63xx/patches-4.14/516-board_96348A-122.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -253,6 +253,30 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_96348A_122 = { -+ .name = "96348A-122", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, -@@ -776,6 +800,7 @@ static const struct board_info __initcon - &board_V2500V_BB, - &board_V2110, - &board_ct536_ct5621, -+ &board_96348A_122, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -818,6 +843,7 @@ static struct of_device_id const bcm963x - { .compatible = "bt,voyager-2110", .data = &board_V2110, }, - { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, }, - { .compatible = "comtrend,ct-536plus", .data = &board_ct536_ct5621, }, -+ { .compatible = "comtrend,ct-5365", .data = &board_96348A_122, }, - { .compatible = "comtrend,ct-5621", .data = &board_ct536_ct5621, }, - { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, }, - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, diff --git a/target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch b/target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch deleted file mode 100644 index 25e7f9ff0a..0000000000 --- a/target/linux/bcm63xx/patches-4.14/519_board_CPVA502plus.patch +++ /dev/null @@ -1,52 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -225,6 +225,33 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_CPVA502plus = { -+ .name = "CPVA502+", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ }, -+ -+ .ephy_reset_gpio = 4, -+ .ephy_reset_gpio_flags = GPIO_ACTIVE_LOW, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; - - static struct board_info __initdata board_ct536_ct5621 = { - .name = "CT536_CT5621", -@@ -801,6 +828,7 @@ static const struct board_info __initcon - &board_V2110, - &board_ct536_ct5621, - &board_96348A_122, -+ &board_CPVA502plus, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -853,6 +881,7 @@ static struct of_device_id const bcm963x - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, -+ { .compatible = "telsey,cpva502plus", .data = &board_CPVA502plus, }, - { .compatible = "telsey,magic", .data = &board_96348sv, }, - { .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, }, - { .compatible = "usrobotics,usr9108", .data = &board_96348gw_a, }, diff --git a/target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch deleted file mode 100644 index 17087b36a5..0000000000 --- a/target/linux/bcm63xx/patches-4.14/520-bcm63xx-add-support-for-96368MVWG-board.patch +++ /dev/null @@ -1,118 +0,0 @@ -From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Wed, 20 Jan 2010 16:21:30 +0100 -Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board. - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 95 ++++++++++++++++++++ - .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 + - 2 files changed, 97 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -792,6 +792,58 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -+ * known 6368 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6368 -+static struct board_info __initdata board_96368mvwg = { -+ .name = "96368MVWG", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ -+ .has_usbd = 1, -+ -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port1", -+ }, -+ -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port2", -+ }, -+ -+ [4] = { -+ .used = 1, -+ .phy_id = 0x12, -+ .name = "port0", -+ }, -+ -+ [5] = { -+ .used = 1, -+ .phy_id = 0x11, -+ .name = "port3", -+ }, -+ }, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6368 */ -+ -+/* - * all boards - */ - static const struct board_info __initconst *bcm963xx_boards[] = { -@@ -843,6 +895,10 @@ static const struct board_info __initcon - &board_HW553, - &board_spw303v, - #endif -+ -+#ifdef CONFIG_BCM63XX_CPU_6368 -+ &board_96368mvwg, -+#endif - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -@@ -903,6 +959,7 @@ static struct of_device_id const bcm963x - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 - #endif ---- a/arch/mips/bcm63xx/boards/board_common.c -+++ b/arch/mips/bcm63xx/boards/board_common.c -@@ -81,12 +81,25 @@ void __init board_early_setup(const stru - bcm63xx_pci_enabled = 1; - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G2_PCI; -+ -+ if (BCMCPU_IS_6368()) -+ val |= GPIO_MODE_6368_PCI_REQ1 | -+ GPIO_MODE_6368_PCI_GNT1 | -+ GPIO_MODE_6368_PCI_INTB | -+ GPIO_MODE_6368_PCI_REQ0 | -+ GPIO_MODE_6368_PCI_GNT0; - } - #endif - - if (board.has_pccard) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G1_MII_PCCARD; -+ -+ if (BCMCPU_IS_6368()) -+ val |= GPIO_MODE_6368_PCMCIA_CD1 | -+ GPIO_MODE_6368_PCMCIA_CD2 | -+ GPIO_MODE_6368_PCMCIA_VS1 | -+ GPIO_MODE_6368_PCMCIA_VS2; - } - - if (board.has_enet0 && !board.enet0.use_internal_phy) { diff --git a/target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch deleted file mode 100644 index 03bda96dff..0000000000 --- a/target/linux/bcm63xx/patches-4.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch +++ /dev/null @@ -1,73 +0,0 @@ -From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Fri, 4 Nov 2011 12:33:48 +0100 -Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board. - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 67 +++++++++++++++++++++++++++++ - 1 files changed, 67 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -841,6 +841,45 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_ehci0 = 1, - }; -+ -+static struct board_info __initdata board_96368mvngr = { -+ .name = "96368MVNgr", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+}; - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -@@ -898,6 +937,7 @@ static const struct board_info __initcon - - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, -+ &board_96368mvngr, - #endif - }; - -@@ -959,6 +999,7 @@ static struct of_device_id const bcm963x - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch deleted file mode 100644 index e482b20931..0000000000 --- a/target/linux/bcm63xx/patches-4.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch +++ /dev/null @@ -1,45 +0,0 @@ -From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 May 2012 10:52:25 +0200 -Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 77 +++++++++++++++++++++++++++++ - 1 files changed, 77 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -64,6 +64,33 @@ static struct board_info __initdata boar - .use_fullspeed = 0, - .port_no = 0, - }, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, - }; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - diff --git a/target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch deleted file mode 100644 index 522d99976f..0000000000 --- a/target/linux/bcm63xx/patches-4.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch +++ /dev/null @@ -1,68 +0,0 @@ -From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Tue, 29 May 2012 11:01:12 +0200 -Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 71 +++++++++++++++++++++++++++++ - 1 files changed, 71 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -92,6 +92,40 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_963281TAN = { -+ .name = "963281TAN", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -918,6 +952,7 @@ static const struct board_info __initcon - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_963281TAN, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -974,6 +1009,7 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch b/target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch deleted file mode 100644 index b91fff0695..0000000000 --- a/target/linux/bcm63xx/patches-4.14/524-board_dsl_274xb_rev_f.patch +++ /dev/null @@ -1,80 +0,0 @@ -From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Mon, 30 Apr 2012 09:10:51 +0200 -Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link - DSL-274xB rev F1 - ---- - arch/mips/bcm63xx/boards/board_bcm963xx.c | 104 +++++++++++++++++++++++++++++ - 1 files changed, 104 insertions(+), 0 deletions(-) - ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -126,6 +126,51 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_dsl_274xb_f1 = { -+ .name = "AW4339U", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0x7d1000, -+ .slot = 0, -+ .led_pin = -1, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 1", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -953,6 +998,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - &board_963281TAN, -+ &board_dsl_274xb_f1, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -1011,6 +1057,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch b/target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch deleted file mode 100644 index 3a27db85c1..0000000000 --- a/target/linux/bcm63xx/patches-4.14/525-board_96348w3.patch +++ /dev/null @@ -1,43 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -568,6 +568,24 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - }; - -+/* NetGear DG834G v4 */ -+static struct board_info __initdata board_96348W3 = { -+ .name = "96348W3", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .has_ohci0 = 1, -+}; -+ - static struct board_info __initdata board_96348_D4PW = { - .name = "D-4P-W", - .expected_cpu_id = 0x6348, -@@ -1028,6 +1046,7 @@ static const struct board_info __initcon - &board_ct536_ct5621, - &board_96348A_122, - &board_CPVA502plus, -+ &board_96348W3, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -1083,6 +1102,7 @@ static struct of_device_id const bcm963x - { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, }, - { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, }, - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, -+ { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, diff --git a/target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch b/target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch deleted file mode 100644 index 0cfcc173fe..0000000000 --- a/target/linux/bcm63xx/patches-4.14/526-board_CT6373-1.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -874,6 +874,30 @@ static struct board_info __initdata boar - .num_usbh_ports = 2, - }; - -+static struct board_info __initdata board_ct6373_1 = { -+ .name = "CT6373-1", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW553 = { - .name = "HW553", - .expected_cpu_id = 0x6358, -@@ -1058,6 +1082,7 @@ static const struct board_info __initcon - &board_dsl_274xb_rev_c, - &board_nb4_ser_r0, - &board_nb4_fxc_r1, -+ &board_ct6373_1, - &board_HW553, - &board_spw303v, - #endif -@@ -1116,6 +1141,7 @@ static struct of_device_id const bcm963x - { .compatible = "alcatel,rg100a", .data = &board_96358vw2, }, - { .compatible = "brcm,bcm96358vw", .data = &board_96358vw, }, - { .compatible = "brcm,bcm96358vw2", .data = &board_96358vw2, }, -+ { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, diff --git a/target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch b/target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch deleted file mode 100644 index 45e8717be0..0000000000 --- a/target/linux/bcm63xx/patches-4.14/527-board_dva-g3810bn-tl-1.patch +++ /dev/null @@ -1,52 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -937,6 +937,33 @@ static struct board_info __initdata boar - .use_internal_phy = 1, - }, - }; -+ -+/* D-Link DVA-G3810BN/TL */ -+static struct board_info __initdata board_DVAG3810BN = { -+ .name = "DVAG3810BN", -+ .expected_cpu_id = 0x6358, -+ -+ .has_enet0 = 1, -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ -+ .has_ohci0 = 1, -+ .has_pccard = 1, -+ .has_ehci0 = 1, -+}; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - - /* -@@ -1085,6 +1112,7 @@ static const struct board_info __initcon - &board_ct6373_1, - &board_HW553, - &board_spw303v, -+ &board_DVAG3810BN, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6368 -@@ -1144,6 +1172,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ct-6373", .data = &board_ct6373_1, }, - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, -+ { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-4.14/528-board_nb6.patch b/target/linux/bcm63xx/patches-4.14/528-board_nb6.patch deleted file mode 100644 index b4de7cb078..0000000000 --- a/target/linux/bcm63xx/patches-4.14/528-board_nb6.patch +++ /dev/null @@ -1,56 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -966,6 +966,32 @@ static struct board_info __initdata boar - }; - #endif /* CONFIG_BCM63XX_CPU_6358 */ - -+#ifdef CONFIG_BCM63XX_CPU_6362 -+static struct board_info __initdata board_nb6 = { -+ .name = "NB6", -+ .expected_cpu_id = 0x6362, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6362 */ -+ - /* - * known 6368 boards - */ -@@ -1115,6 +1141,10 @@ static const struct board_info __initcon - &board_DVAG3810BN, - #endif - -+#ifdef CONFIG_BCM63XX_CPU_6362 -+ &board_nb6, -+#endif -+ - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -@@ -1183,6 +1213,9 @@ static struct of_device_id const bcm963x - { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif -+#ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, -+#endif - #ifdef CONFIG_BCM63XX_CPU_6368 - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, diff --git a/target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch b/target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch deleted file mode 100644 index 9e42c40b57..0000000000 --- a/target/linux/bcm63xx/patches-4.14/529-board_fast2604.patch +++ /dev/null @@ -1,41 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -501,6 +501,22 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+static struct board_info __initdata board_FAST2604 = { -+ .name = "F@ST2604", -+ .expected_cpu_id = 0x6348, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - static struct board_info __initdata board_rta1025w_16 = { - .name = "RTA1025W_16", - .expected_cpu_id = 0x6348, -@@ -1112,6 +1128,7 @@ static const struct board_info __initcon - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, -+ &board_FAST2604, - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -@@ -1187,6 +1204,7 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,dg834gt-pn", .data = &board_96348gw_10, }, - { .compatible = "netgear,dg834g-v4", .data = &board_96348W3, }, - { .compatible = "sagem,fast-2404", .data = &board_FAST2404, }, -+ { .compatible = "sagem,fast-2604", .data = &board_FAST2604, }, - { .compatible = "t-com,speedport-w-500v", .data = &board_spw500v, }, - { .compatible = "tecom,gw6000", .data = &board_gw6000, }, - { .compatible = "tecom,gw6200", .data = &board_gw6200, }, diff --git a/target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch b/target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch deleted file mode 100644 index 0cecd9cb6c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/530-board_A4001N1.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -127,6 +127,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_A4001N1 = { -+ .name = "963281T_TEF", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - static struct board_info __initdata board_dsl_274xb_f1 = { - .name = "AW4339U", - .expected_cpu_id = 0x6328, -@@ -1109,6 +1152,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - &board_963281TAN, -+ &board_A4001N1, - &board_dsl_274xb_f1, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 -@@ -1174,6 +1218,7 @@ static struct of_device_id const bcm963x - { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, diff --git a/target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch b/target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch deleted file mode 100644 index f2af2c5b2c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/531-board_AR-5387un.patch +++ /dev/null @@ -1,97 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -93,6 +93,78 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5387un_fixups[] = { -+ { .offset = 2, .value = 0x05bb }, -+ { .offset = 65, .value = 0x1204 }, -+ { .offset = 78, .value = 0x0303 }, -+ { .offset = 79, .value = 0x0202 }, -+ { .offset = 80, .value = 0xff02 }, -+ { .offset = 87, .value = 0x0315 }, -+ { .offset = 88, .value = 0x0315 }, -+ { .offset = 96, .value = 0x2048 }, -+ { .offset = 97, .value = 0xff11 }, -+ { .offset = 98, .value = 0x1567 }, -+ { .offset = 99, .value = 0xfb24 }, -+ { .offset = 100, .value = 0x3e3c }, -+ { .offset = 101, .value = 0x4038 }, -+ { .offset = 102, .value = 0xfe7f }, -+ { .offset = 103, .value = 0x1279 }, -+ { .offset = 112, .value = 0x2048 }, -+ { .offset = 113, .value = 0xff03 }, -+ { .offset = 114, .value = 0x154c }, -+ { .offset = 115, .value = 0xfb27 }, -+ { .offset = 116, .value = 0x3e3c }, -+ { .offset = 117, .value = 0x4038 }, -+ { .offset = 118, .value = 0xfe87 }, -+ { .offset = 119, .value = 0x1233 }, -+ { .offset = 203, .value = 0x2226 }, -+}; -+ -+static struct board_info __initdata board_AR5387un = { -+ .name = "96328A-1441N1", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5387un_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups), -+ }, -+}; -+ - static struct board_info __initdata board_963281TAN = { - .name = "963281TAN", - .expected_cpu_id = 0x6328, -@@ -1151,6 +1223,7 @@ static const struct board_info __initcon - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AR5387un, - &board_963281TAN, - &board_A4001N1, - &board_dsl_274xb_f1, -@@ -1221,6 +1294,7 @@ static struct of_device_id const bcm963x - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch b/target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch deleted file mode 100644 index dc8efed328..0000000000 --- a/target/linux/bcm63xx/patches-4.14/532-board_AR-5381u.patch +++ /dev/null @@ -1,79 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -93,6 +93,60 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5381u_fixups[] = { -+ { .offset = 97, .value = 0xfee5 }, -+ { .offset = 98, .value = 0x157c }, -+ { .offset = 99, .value = 0xfae7 }, -+ { .offset = 113, .value = 0xfefa }, -+ { .offset = 114, .value = 0x15d6 }, -+ { .offset = 115, .value = 0xfaf8 }, -+}; -+ -+static struct board_info __initdata board_AR5381u = { -+ .name = "96328A-1241N", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5381u_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5381u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata ar5387un_fixups[] = { - { .offset = 2, .value = 0x05bb }, - { .offset = 65, .value = 0x1204 }, -@@ -1223,6 +1277,7 @@ static const struct board_info __initcon - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AR5381u, - &board_AR5387un, - &board_963281TAN, - &board_A4001N1, -@@ -1294,6 +1349,7 @@ static struct of_device_id const bcm963x - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, -+ { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - #endif diff --git a/target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch b/target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch deleted file mode 100644 index d56df55622..0000000000 --- a/target/linux/bcm63xx/patches-4.14/533-board_rta770bw.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -411,6 +411,20 @@ static struct board_info __initdata boar - .name = "96345GW2", - .expected_cpu_id = 0x6345, - }; -+ -+static struct board_info __initdata board_rta770bw = { -+ .name = "RTA770BW", -+ .expected_cpu_id = 0x6345, -+ -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6345 */ - - /* -@@ -1291,6 +1305,7 @@ static const struct board_info __initcon - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -+ &board_rta770bw, - #endif - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, -@@ -1361,6 +1376,7 @@ static struct of_device_id const bcm963x - #endif - #ifdef CONFIG_BCM63XX_CPU_6345 - { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, -+ { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6348 - { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-4.14/534-board_hw556.patch b/target/linux/bcm63xx/patches-4.14/534-board_hw556.patch deleted file mode 100644 index cf55255cd1..0000000000 --- a/target/linux/bcm63xx/patches-4.14/534-board_hw556.patch +++ /dev/null @@ -1,123 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -12,6 +12,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -1123,6 +1124,92 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HW556_C = { -+ .name = "HW556_C", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0xeffe00, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+static struct board_info __initdata board_HW556_A = { -+ .name = "HW556_A", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0xf7e000, -+ .slot = 1, -+ .endian_check = 1, -+ .led_pin = 2, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+static struct board_info __initdata board_HW556_B = { -+ .name = "HW556_B", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_ATHEROS, -+ .caldata_offset = 0xefe000, -+ .slot = 1, -+ .endian_check = 1, -+ .led_pin = 2, -+ .led_active_high = 1, -+ }, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - /* T-Home Speedport W 303V Typ B */ - static struct board_info __initdata board_spw303v = { - .name = "96358-502V", -@@ -1341,6 +1428,9 @@ static const struct board_info __initcon - &board_nb4_fxc_r1, - &board_ct6373_1, - &board_HW553, -+ &board_HW556_A, -+ &board_HW556_B, -+ &board_HW556_C, - &board_spw303v, - &board_DVAG3810BN, - #endif -@@ -1413,6 +1503,9 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, -+ { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, -+ { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, -+ { .compatible = "huawei,echolife-hg556a-c", .data = &board_HW556_C, }, - { .compatible = "pirelli,a226g", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m", .data = &board_DWVS0, }, - { .compatible = "pirelli,a226m-fwb", .data = &board_DWVS0, }, diff --git a/target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch b/target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch deleted file mode 100644 index c78e59efd3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/535-board_rta770w.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -426,6 +426,25 @@ static struct board_info __initdata boar - .force_duplex_full = 1, - }, - }; -+ -+// Actually this board is the very same as the rta770bw, -+// where the additional 'b' within the name just -+// just indicates 'Annex B'. The ADSL Modem itself is able -+// to handle both Annex A as well as Annex B - -+// the loaded firmware makes the only difference -+static struct board_info __initdata board_rta770w = { -+ .name = "RTA770W", -+ .expected_cpu_id = 0x6345, -+ -+ .has_enet0 = 1, -+ -+ .enet0 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6345 */ - - /* -@@ -1393,6 +1412,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, - &board_rta770bw, -+ &board_rta770w, - #endif - #ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, -@@ -1467,6 +1487,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6345 - { .compatible = "brcm,bcm96345gw2", .data = &board_96345gw2, }, - { .compatible = "dynalink,rta770bw", .data = &board_rta770bw, }, -+ { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6348 - { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch b/target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch deleted file mode 100644 index 358e97480d..0000000000 --- a/target/linux/bcm63xx/patches-4.14/536-board_fast2704.patch +++ /dev/null @@ -1,74 +0,0 @@ -From: Marcin Jurkowski -Date: Thu, 31 Oct 2013 22:33:10 +0000 -Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL - router - -This adds kernel support support for Sagemcom F@st 2704 wireless ADSL -router. -It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ -modem equipped with 64 MiB RAM and 8 MiB flash. - -Signed-off-by: Marcin Jurkowski ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -341,6 +341,43 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_FAST2704V2 = { -+ .name = "F@ST2704V2", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .has_usbd = 1, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -1402,6 +1439,7 @@ static const struct board_info __initcon - &board_963281TAN, - &board_A4001N1, - &board_dsl_274xb_f1, -+ &board_FAST2704V2, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -1477,6 +1515,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, -+ { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch b/target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch deleted file mode 100644 index ff0440772b..0000000000 --- a/target/linux/bcm63xx/patches-4.14/537-board_fast2504n.patch +++ /dev/null @@ -1,66 +0,0 @@ -From: Max Staudt -Date: Wed, 15 Jan 2014 18:51:13 +0000 -Subject: [PATCH] bcm63xx: F@ST2504n board support (Linux-3.10.26) - -Signed-off-by: Max Staudt ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1332,6 +1332,41 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_fast2504n = { -+ .name = "F@ST2504n", -+ .expected_cpu_id = 0x6362, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6362 */ - - /* -@@ -1495,6 +1530,7 @@ static const struct board_info __initcon - - #ifdef CONFIG_BCM63XX_CPU_6362 - &board_nb6, -+ &board_fast2504n, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6368 -@@ -1576,6 +1612,7 @@ static struct of_device_id const bcm963x - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6362 -+ { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6368 diff --git a/target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch b/target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch deleted file mode 100644 index c9c532d30e..0000000000 --- a/target/linux/bcm63xx/patches-4.14/555-board_96318ref.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -50,6 +50,55 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_3368 */ - - /* -+ * known 6318 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_6318 -+static struct board_info __initdata board_96318ref = { -+ .name = "96318REF", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ -+ .has_usbd = 1, -+ -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_6318 */ -+ -+/* - * known 6328 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6328 -@@ -1467,6 +1516,9 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_3368 - &board_cvg834g, - #endif -+#ifdef CONFIG_BCM63XX_CPU_6318 -+ &board_96318ref, -+#endif - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, - &board_AR5381u, -@@ -1544,6 +1596,9 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_3368 - { .compatible = "netgear,cvg834g", .data = &board_cvg834g, }, - #endif -+#ifdef CONFIG_BCM63XX_CPU_6318 -+ { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, -+#endif - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, diff --git a/target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch b/target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch deleted file mode 100644 index f4ff4fd691..0000000000 --- a/target/linux/bcm63xx/patches-4.14/556-board_96318ref_p300.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -96,6 +96,50 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_96318ref_p300 = { -+ .name = "96318REF_P300", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ -+ .has_usbd = 1, -+ -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -1518,6 +1562,7 @@ static const struct board_info __initcon - #endif - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, -+ &board_96318ref_p300, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -1598,6 +1643,7 @@ static struct of_device_id const bcm963x - #endif - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, -+ { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, diff --git a/target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch b/target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch deleted file mode 100644 index d5af2f0d1c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/557-board_bcm963269bhr.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1554,6 +1554,50 @@ static struct board_info __initdata boar - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -+ * known 63268/63269 boards -+ */ -+#ifdef CONFIG_BCM63XX_CPU_63268 -+static struct board_info __initdata board_963269bhr = { -+ .name = "963269BHR", -+ .expected_cpu_id = 0x63268, -+ -+ .has_pci = 1, -+ -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+#endif /* CONFIG_BCM63XX_CPU_63268 */ -+ -+/* - * all boards - */ - static const struct board_info __initconst *bcm963xx_boards[] = { -@@ -1634,6 +1678,9 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - #endif -+#ifdef CONFIG_BCM63XX_CPU_63268 -+ &board_963269bhr, -+#endif - }; - - static struct of_device_id const bcm963xx_boards_dt[] = { -@@ -1721,6 +1768,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 -+ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - #endif - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch b/target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch deleted file mode 100644 index 85521b44be..0000000000 --- a/target/linux/bcm63xx/patches-4.14/558-board_AR1004G.patch +++ /dev/null @@ -1,48 +0,0 @@ -From: "mexit@o2.pl" -Date: Sun, 24 Nov 2013 21:33:38 +0000 -Subject: [PATCH 4/5] bcm63xx: add support for Asmax AR 1004g router - -Support for Asmax AR 1004g router - -Signed-off-by: Adrian Feliks ---- ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -647,6 +647,21 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+static struct board_info __initdata board_96348gw_10_AR1004G = { -+ .name = "AR1004G", -+ .expected_cpu_id = 0x6348, -+ -+ .has_enet1 = 1, -+ .has_pci = 1, -+ -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+}; -+ - - /* BT Voyager 2110 */ - static struct board_info __initdata board_V2110 = { -@@ -1649,6 +1664,7 @@ static const struct board_info __initcon - &board_96348A_122, - &board_CPVA502plus, - &board_96348W3, -+ &board_96348gw_10_AR1004G, - #endif - - #ifdef CONFIG_BCM63XX_CPU_6358 -@@ -1713,6 +1729,7 @@ static struct of_device_id const bcm963x - { .compatible = "dynalink,rta770w", .data = &board_rta770w, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6348 -+ { .compatible = "asmax,ar-1004g", .data = &board_96348gw_10_AR1004G, }, - { .compatible = "belkin,f5d7633", .data = &board_96348gw_10, }, - { .compatible = "brcm,bcm96348r", .data = &board_96348r, }, - { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, }, diff --git a/target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch b/target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch deleted file mode 100644 index 355bdb2767..0000000000 --- a/target/linux/bcm63xx/patches-4.14/559-board_vw6339gu.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1610,6 +1610,51 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_vw6339gu = { -+ .name = "VW6339GU", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ehci0 = 1, -+ .has_ohci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN2", -+ }, -+ -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN4", -+ }, -+ -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ -+ [4] = { -+ .used = 1, -+ .phy_id = 7, -+ .name = "WAN", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_63268 */ - - /* -@@ -1696,6 +1741,7 @@ static const struct board_info __initcon - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963269bhr, -+ &board_vw6339gu, - #endif - }; - -@@ -1786,6 +1832,7 @@ static struct of_device_id const bcm963x - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, -+ { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - #endif - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch b/target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch deleted file mode 100644 index b8a2af4319..0000000000 --- a/target/linux/bcm63xx/patches-4.14/560-board_963268gu_p300.patch +++ /dev/null @@ -1,83 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1572,6 +1572,64 @@ static struct board_info __initdata boar - * known 63268/63269 boards - */ - #ifdef CONFIG_BCM63XX_CPU_63268 -+static struct board_info __initdata board_963268bu_p300 = { -+ .name = "963268BU_P300", -+ .expected_cpu_id = 0x63268, -+ -+ .has_ehci0 = 1, -+ .has_ohci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_usbd = 1, -+ -+ .usbd = { -+ .use_fullspeed = 0, -+ .port_no = 0, -+ }, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 17, -+ .name = "FE1", -+ }, -+ -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "GbE2", -+ }, -+ -+ [4] = { -+ .used = 1, -+ .phy_id = 0, -+ .name = "GbE3", -+ }, -+ -+ [5] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "GbE1", -+ }, -+ -+ [6] = { -+ .used = 1, -+ .phy_id = 24, -+ .name = "GbE4", -+ }, -+ -+ [7] = { -+ .used = 1, -+ .phy_id = 25, -+ .name = "GbE5", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_963269bhr = { - .name = "963269BHR", - .expected_cpu_id = 0x63268, -@@ -1740,6 +1798,7 @@ static const struct board_info __initcon - &board_96368mvngr, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 -+ &board_963268bu_p300, - &board_963269bhr, - &board_vw6339gu, - #endif -@@ -1831,6 +1890,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 -+ { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, - #endif diff --git a/target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch b/target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch deleted file mode 100644 index 8b8b1ed829..0000000000 --- a/target/linux/bcm63xx/patches-4.14/561-board_WAP-5813n.patch +++ /dev/null @@ -1,75 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -13,6 +13,8 @@ - #include - #include - #include -+#include -+#include - #include - #include - #include -@@ -1566,6 +1568,47 @@ static struct board_info __initdata boar - .has_ohci0 = 1, - .has_ehci0 = 1, - }; -+ -+static struct sprom_fixup __initdata wap5813n_fixups[] = { -+ { .offset = 97, .value = 0xfeed }, -+ { .offset = 98, .value = 0x15d1 }, -+ { .offset = 99, .value = 0xfb0d }, -+ { .offset = 113, .value = 0xfef7 }, -+ { .offset = 114, .value = 0x15f7 }, -+ { .offset = 115, .value = 0xfb1a }, -+}; -+ -+static struct board_info __initdata board_WAP5813n = { -+ .name = "96369R-1231N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [4] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = wap5813n_fixups, -+ .num_board_fixups = ARRAY_SIZE(wap5813n_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6368 */ - - /* -@@ -1796,6 +1839,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_WAP5813n, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 - &board_963268bu_p300, -@@ -1888,6 +1932,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6368 - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, -+ { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, diff --git a/target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch b/target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch deleted file mode 100644 index 36014ea49a..0000000000 --- a/target/linux/bcm63xx/patches-4.14/562-board_VR-3025u.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1569,6 +1569,59 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+static struct sprom_fixup __initdata vr3025u_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3025u = { -+ .name = "96368M-1541N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3025u_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3025u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -1839,6 +1892,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_VR3025u, - &board_WAP5813n, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 -@@ -1932,6 +1986,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6368 - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, -+ { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch b/target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch deleted file mode 100644 index a34b7a1f3f..0000000000 --- a/target/linux/bcm63xx/patches-4.14/563-board_VR-3025un.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1622,6 +1622,59 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vr3025un_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3025un = { -+ .name = "96368M-1341N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3025un_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3025un_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -1893,6 +1946,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_VR3025u, -+ &board_VR3025un, - &board_WAP5813n, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 -@@ -1987,6 +2041,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, -+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch b/target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch deleted file mode 100644 index 9e068029e8..0000000000 --- a/target/linux/bcm63xx/patches-4.14/564-board_P870HW-51a_v2.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1578,6 +1578,48 @@ static struct sprom_fixup __initdata vr3 - { .offset = 115, .value = 0xfad9 }, - }; - -+static struct board_info __initdata board_P870HW51A_V2 = { -+ .name = "P870HW-51a_v2", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_VR3025u = { - .name = "96368M-1541N", - .expected_cpu_id = 0x6368, -@@ -1945,6 +1987,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, - &board_WAP5813n, -@@ -2043,6 +2086,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, diff --git a/target/linux/bcm63xx/patches-4.14/565-board_hw520.patch b/target/linux/bcm63xx/patches-4.14/565-board_hw520.patch deleted file mode 100644 index 517df7d9f3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/565-board_hw520.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1264,6 +1264,36 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HW520 = { -+ .name = "HW6358GW_B", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enet0 = 1, -+ .enet0 = { -+ .has_phy = 1, -+ .use_internal_phy = 1, -+ }, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4318, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW553 = { - .name = "HW553", - .expected_cpu_id = 0x6358, -@@ -1971,6 +2001,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_ct6373_1, -+ &board_HW520, - &board_HW553, - &board_HW556_A, - &board_HW556_B, -@@ -2063,6 +2094,7 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-274xb-c2", .data = &board_dsl_274xb_rev_c, }, - { .compatible = "d-link,dsl-2650u", .data = &board_96358vw2, }, - { .compatible = "d-link,dva-g3810bn-tl", .data = &board_DVAG3810BN, }, -+ { .compatible = "huawei,echolife-hg520v", .data = &board_HW520, }, - { .compatible = "huawei,echolife-hg553", .data = &board_HW553, }, - { .compatible = "huawei,echolife-hg556a-a", .data = &board_HW556_A, }, - { .compatible = "huawei,echolife-hg556a-b", .data = &board_HW556_B, }, diff --git a/target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch b/target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch deleted file mode 100644 index 2dc61d5a4f..0000000000 --- a/target/linux/bcm63xx/patches-4.14/566-board_A4001N.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -349,6 +349,49 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_A4001N = { -+ .name = "96328dg2x2", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43225, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - static struct board_info __initdata board_A4001N1 = { - .name = "963281T_TEF", - .expected_cpu_id = 0x6328, -@@ -1952,6 +1995,7 @@ static const struct board_info __initcon - &board_AR5381u, - &board_AR5387un, - &board_963281TAN, -+ &board_A4001N, - &board_A4001N1, - &board_dsl_274xb_f1, - &board_FAST2704V2, -@@ -2040,6 +2084,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 -+ { .compatible = "adb,a4001n", .data = &board_A4001N, }, - { .compatible = "adb,a4001n1", .data = &board_A4001N1, }, - { .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, }, - { .compatible = "brcm,bcm96328avng", .data = &board_96328avng, }, diff --git a/target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch b/target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch deleted file mode 100644 index b7e155de55..0000000000 --- a/target/linux/bcm63xx/patches-4.14/567-board_dsl-2751b_e1.patch +++ /dev/null @@ -1,93 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -142,6 +142,74 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { -+ { .offset = 96, .value = 0x2046 }, -+ { .offset = 97, .value = 0xfe9d }, -+ { .offset = 98, .value = 0x1854 }, -+ { .offset = 99, .value = 0xfa59 }, -+ { .offset = 112, .value = 0x2046 }, -+ { .offset = 113, .value = 0xfe79 }, -+ { .offset = 114, .value = 0x17f5 }, -+ { .offset = 115, .value = 0xfa47 }, -+ { .offset = 161, .value = 0x2222 }, -+ { .offset = 162, .value = 0x2222 }, -+ { .offset = 169, .value = 0x2222 }, -+ { .offset = 170, .value = 0x2222 }, -+ { .offset = 171, .value = 0x5555 }, -+ { .offset = 172, .value = 0x5555 }, -+ { .offset = 173, .value = 0x4444 }, -+ { .offset = 174, .value = 0x4444 }, -+ { .offset = 175, .value = 0x5555 }, -+ { .offset = 176, .value = 0x5555 }, -+}; -+ -+static struct board_info __initdata board_dsl_2751b_d1 = { -+ .name = "AW5200B", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .has_enetsw = 1, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = dsl2751b_e1_fixups, -+ .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -1989,6 +2057,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, - &board_96318ref_p300, -+ &board_dsl_2751b_d1, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -2082,6 +2151,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, -+ { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n", .data = &board_A4001N, }, diff --git a/target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch b/target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch deleted file mode 100644 index 29263bc9c8..0000000000 --- a/target/linux/bcm63xx/patches-4.14/568-board_DGND3700v1_3800B.patch +++ /dev/null @@ -1,49 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1710,6 +1710,30 @@ static struct board_info __initdata boar - .has_ehci0 = 1, - }; - -+static struct board_info __initdata board_DGND3700v1_3800B = { -+ .name = "DGND3700v1_3800B", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2131,6 +2155,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6368 - &board_96368mvwg, - &board_96368mvngr, -+ &board_DGND3700v1_3800B, - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -@@ -2233,6 +2258,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch b/target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch deleted file mode 100644 index 990999479d..0000000000 --- a/target/linux/bcm63xx/patches-4.14/569-board_homehub2a.patch +++ /dev/null @@ -1,50 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1375,6 +1375,31 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_homehub2a = { -+ .name = "HOMEHUB2A", -+ .expected_cpu_id = 0x6358, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enet1 = 1, -+ .enet1 = { -+ .has_phy = 1, -+ .phy_id = 0, -+ .force_speed_100 = 1, -+ .force_duplex_full = 1, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM4322, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+}; -+ - static struct board_info __initdata board_HW520 = { - .name = "HW6358GW_B", - .expected_cpu_id = 0x6358, -@@ -2138,6 +2163,7 @@ static const struct board_info __initcon - &board_nb4_ser_r0, - &board_nb4_fxc_r1, - &board_ct6373_1, -+ &board_homehub2a, - &board_HW520, - &board_HW553, - &board_HW556_A, -@@ -2247,6 +2273,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-4-foxconn-r1", .data = &board_nb4_fxc_r1, }, - { .compatible = "t-com,speedport-w-303v", .data = &board_spw303v, }, - { .compatible = "telsey,cpva642", .data = &board_CPVA642, }, -+ { .compatible = "bt,home-hub-2-a", .data = &board_homehub2a, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6362 - { .compatible = "sagem,fast-2504n", .data = &board_fast2504n, }, diff --git a/target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch b/target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch deleted file mode 100644 index 7b4d1fc727..0000000000 --- a/target/linux/bcm63xx/patches-4.14/570-board_HG655b.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1759,6 +1759,52 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HG655b = { -+ .name = "HW65x", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0x7c0000, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2182,6 +2228,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_HG655b, - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -@@ -2285,6 +2332,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif diff --git a/target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch b/target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch deleted file mode 100644 index fb84d8d70c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/571-board_fast2704n.patch +++ /dev/null @@ -1,64 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -210,6 +210,45 @@ static struct board_info __initdata boar - .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups), - }, - }; -+ -+static struct board_info __initdata board_FAST2704N = { -+ .name = "F@ST2704N", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .has_enetsw = 1, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_6318 */ - - /* -@@ -2153,6 +2192,7 @@ static const struct board_info __initcon - &board_96318ref, - &board_96318ref_p300, - &board_dsl_2751b_d1, -+ &board_FAST2704N, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -@@ -2250,6 +2290,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, - { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, -+ { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - { .compatible = "adb,a4001n", .data = &board_A4001N, }, diff --git a/target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch b/target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch deleted file mode 100644 index dec8adf709..0000000000 --- a/target/linux/bcm63xx/patches-4.14/572-board_VR-3026e.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1992,6 +1992,59 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vr3026e_fixups[] = { -+ { .offset = 97, .value = 0xfeb3 }, -+ { .offset = 98, .value = 0x1618 }, -+ { .offset = 99, .value = 0xfab0 }, -+ { .offset = 113, .value = 0xfed1 }, -+ { .offset = 114, .value = 0x1609 }, -+ { .offset = 115, .value = 0xfad9 }, -+}; -+ -+static struct board_info __initdata board_VR3026e = { -+ .name = "96368MT-1341N1", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vr3026e_fixups, -+ .num_board_fixups = ARRAY_SIZE(vr3026e_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -2272,6 +2325,7 @@ static const struct board_info __initcon - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, -+ &board_VR3026e, - &board_WAP5813n, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 -@@ -2372,6 +2426,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, -+ { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, diff --git a/target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch b/target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch deleted file mode 100644 index ab3e6fea86..0000000000 --- a/target/linux/bcm63xx/patches-4.14/573-board_R5010UNv2.patch +++ /dev/null @@ -1,69 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -623,6 +623,50 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_R5010UNV2 = { -+ .name = "96328ang", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ }, -+}; -+ - #endif /* CONFIG_BCM63XX_CPU_6328 */ - - /* -@@ -2256,6 +2300,7 @@ static const struct board_info __initcon - &board_A4001N1, - &board_dsl_274xb_f1, - &board_FAST2704V2, -+ &board_R5010UNV2, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, -@@ -2354,6 +2399,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,ar-5381u", .data = &board_AR5381u, }, - { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, }, - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, -+ { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, - { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 diff --git a/target/linux/bcm63xx/patches-4.14/574-board_HG622.patch b/target/linux/bcm63xx/patches-4.14/574-board_HG622.patch deleted file mode 100644 index 3a14751d5c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/574-board_HG622.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1888,6 +1888,52 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_HG622 = { -+ .name = "96368MVWG_hg622", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_caldata = 1, -+ .caldata = { -+ { -+ .vendor = PCI_VENDOR_ID_RALINK, -+ .caldata_offset = 0xfa0000, -+ .slot = 1, -+ .eeprom = "rt2x00.eeprom", -+ }, -+ }, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+}; -+ - static struct sprom_fixup __initdata vr3025u_fixups[] = { - { .offset = 97, .value = 0xfeb3 }, - { .offset = 98, .value = 0x1618 }, -@@ -2366,6 +2412,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, - &board_VR3025u, -@@ -2474,6 +2521,7 @@ static struct of_device_id const bcm963x - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, - { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, -+ { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, diff --git a/target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch b/target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch deleted file mode 100644 index 1619376490..0000000000 --- a/target/linux/bcm63xx/patches-4.14/575-board_EVG2000.patch +++ /dev/null @@ -1,61 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1842,6 +1842,42 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata EVG2000_fixups[] = { -+ { .offset = 219, .value = 0xec08 }, -+}; -+ -+static struct board_info __initdata board_EVG2000 = { -+ .name = "96369PVG", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .type = SPROM_BCM4322, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = EVG2000_fixups, -+ .num_board_fixups = ARRAY_SIZE(EVG2000_fixups), -+ }, -+}; -+ - static struct board_info __initdata board_HG655b = { - .name = "HW65x", - .expected_cpu_id = 0x6368, -@@ -2412,6 +2448,7 @@ static const struct board_info __initcon - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -+ &board_EVG2000, - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -@@ -2524,6 +2561,7 @@ static struct of_device_id const bcm963x - { .compatible = "huawei,echolife-hg622", .data = &board_HG622, }, - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, -+ { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch b/target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch deleted file mode 100644 index c61fcdd98a..0000000000 --- a/target/linux/bcm63xx/patches-4.14/576-board_AV4202N.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -1732,6 +1732,51 @@ static struct board_info __initdata boar - * known 6368 boards - */ - #ifdef CONFIG_BCM63XX_CPU_6368 -+static struct board_info __initdata board_AV4202N = { -+ .name = "96368_Swiss_S1", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "port1", -+ }, -+ -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "port2", -+ }, -+ -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "port3", -+ }, -+ -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "port4", -+ }, -+ }, -+ }, -+ .use_fallback_sprom = 1, -+ .fallback_sprom = { -+ .pci_bus = 0, -+ .pci_dev = 1, -+ }, -+ -+}; -+ - static struct board_info __initdata board_96368mvwg = { - .name = "96368MVWG", - .expected_cpu_id = 0x6368, -@@ -2445,6 +2490,7 @@ static const struct board_info __initcon - #endif - - #ifdef CONFIG_BCM63XX_CPU_6368 -+ &board_AV4202N, - &board_96368mvwg, - &board_96368mvngr, - &board_DGND3700v1_3800B, -@@ -2552,6 +2598,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "adb,av4202n", .data = &board_AV4202N, }, - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, diff --git a/target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch b/target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch deleted file mode 100644 index baed99ccb8..0000000000 --- a/target/linux/bcm63xx/patches-4.14/577-board_VH4032N.patch +++ /dev/null @@ -1,125 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2216,6 +2216,106 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata vh4032n_fixups[] = { -+ { .offset = 2, .value = 0x04d2 }, -+ { .offset = 4, .value = 0x4350 }, -+ { .offset = 65, .value = 0x1300 }, -+ { .offset = 68, .value = 0x0402 }, -+ { .offset = 70, .value = 0x0090 }, -+ { .offset = 71, .value = 0x4c19 }, -+ { .offset = 72, .value = 0x2345 }, -+ { .offset = 87, .value = 0x0315 }, -+ { .offset = 88, .value = 0x0315 }, -+ { .offset = 96, .value = 0x2048 }, -+ { .offset = 97, .value = 0xfed7 }, -+ { .offset = 98, .value = 0x15a6 }, -+ { .offset = 99, .value = 0xfaee }, -+ { .offset = 100, .value = 0x3e3a }, -+ { .offset = 101, .value = 0x3a36 }, -+ { .offset = 102, .value = 0xff7f }, -+ { .offset = 103, .value = 0x11b9 }, -+ { .offset = 104, .value = 0xfc53 }, -+ { .offset = 105, .value = 0xffe6 }, -+ { .offset = 106, .value = 0xfdd2 }, -+ { .offset = 107, .value = 0xfe49 }, -+ { .offset = 108, .value = 0xff6a }, -+ { .offset = 109, .value = 0x136e }, -+ { .offset = 110, .value = 0xfbed }, -+ { .offset = 111, .value = 0x0000 }, -+ { .offset = 112, .value = 0x2048 }, -+ { .offset = 113, .value = 0xfee2 }, -+ { .offset = 114, .value = 0x15e5 }, -+ { .offset = 115, .value = 0xfaed }, -+ { .offset = 116, .value = 0x3e3a }, -+ { .offset = 117, .value = 0x3a36 }, -+ { .offset = 118, .value = 0xffc8 }, -+ { .offset = 119, .value = 0x12b8 }, -+ { .offset = 120, .value = 0xfca1 }, -+ { .offset = 121, .value = 0xff9b }, -+ { .offset = 122, .value = 0x122a }, -+ { .offset = 123, .value = 0xfcc8 }, -+ { .offset = 124, .value = 0xff95 }, -+ { .offset = 125, .value = 0x146b }, -+ { .offset = 126, .value = 0xfbba }, -+ { .offset = 127, .value = 0x0000 }, -+ { .offset = 161, .value = 0x0000 }, -+ { .offset = 162, .value = 0x0000 }, -+ { .offset = 169, .value = 0x0000 }, -+ { .offset = 170, .value = 0x0000 }, -+ { .offset = 171, .value = 0x0000 }, -+ { .offset = 172, .value = 0x0000 }, -+ { .offset = 173, .value = 0x0000 }, -+ { .offset = 174, .value = 0x0000 }, -+ { .offset = 175, .value = 0x0000 }, -+ { .offset = 176, .value = 0x0000 }, -+ { .offset = 219, .value = 0x1108 }, -+}; -+ -+static struct board_info __initdata board_VH4032N = { -+ .name = "VH4032N", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43222, -+ .pci_bus = 0, -+ .pci_dev = 1, -+ .board_fixups = vh4032n_fixups, -+ .num_board_fixups = ARRAY_SIZE(vh4032n_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata wap5813n_fixups[] = { - { .offset = 97, .value = 0xfeed }, - { .offset = 98, .value = 0x15d1 }, -@@ -2498,6 +2598,7 @@ static const struct board_info __initcon - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -+ &board_VH4032N, - &board_VR3025u, - &board_VR3025un, - &board_VR3026e, -@@ -2609,6 +2710,7 @@ static struct of_device_id const bcm963x - { .compatible = "huawei,echolife-hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700-v1", .data = &board_DGND3700v1_3800B, }, - { .compatible = "netgear,evg2000", .data = &board_EVG2000, }, -+ { .compatible = "observa,vh4032n", .data = &board_VH4032N, }, - { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_63268 diff --git a/target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch b/target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch deleted file mode 100644 index f2b2e1e0b4..0000000000 --- a/target/linux/bcm63xx/patches-4.14/578-board_R1000H.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2066,6 +2066,29 @@ static struct board_info __initdata boar - }, - }; - -+static struct board_info __initdata board_R1000H = { -+ .name = "R1000H", -+ .expected_cpu_id = 0x6368, -+ -+ .has_pci = 1, -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ -+ .has_enetsw = 1, -+ .enetsw = { -+ .used_ports = { -+ [5] = { -+ .used = 1, -+ .phy_id = 0xff, -+ .bypass_link = 1, -+ .force_speed = 1000, -+ .force_duplex_full = 1, -+ .name = "RGMII", -+ }, -+ }, -+ }, -+}; -+ - static struct board_info __initdata board_VR3025u = { - .name = "96368M-1541N", - .expected_cpu_id = 0x6368, -@@ -2598,6 +2621,7 @@ static const struct board_info __initcon - &board_HG622, - &board_HG655b, - &board_P870HW51A_V2, -+ &board_R1000H, - &board_VH4032N, - &board_VR3025u, - &board_VR3025un, -@@ -2699,6 +2723,7 @@ static struct of_device_id const bcm963x - { .compatible = "sfr,neufbox-6-sercomm-r0", .data = &board_nb6, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6368 -+ { .compatible = "actiontec,r1000h", .data = &board_R1000H, }, - { .compatible = "adb,av4202n", .data = &board_AV4202N, }, - { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, diff --git a/target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch b/target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch deleted file mode 100644 index 0393d46cd3..0000000000 --- a/target/linux/bcm63xx/patches-4.14/579-board_AR-5315u.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -143,6 +143,67 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ar5315u_fixups[] = { -+ { .offset = 6, .value = 0x1c00 }, -+ { .offset = 65, .value = 0x1255 }, -+ { .offset = 97, .value = 0xfe55 }, -+ { .offset = 98, .value = 0x171d }, -+ { .offset = 99, .value = 0xfa42 }, -+ { .offset = 113, .value = 0xfeb7 }, -+ { .offset = 114, .value = 0x18cd }, -+ { .offset = 115, .value = 0xfa4f }, -+ { .offset = 162, .value = 0x6444 }, -+ { .offset = 170, .value = 0x6444 }, -+ { .offset = 172, .value = 0x6444 }, -+}; -+ -+static struct board_info __initdata board_AR5315u = { -+ .name = "96318A-1441N1", -+ .expected_cpu_id = 0x6318, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .has_enetsw = 1, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "LAN4", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ar5315u_fixups, -+ .num_board_fixups = ARRAY_SIZE(ar5315u_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = { - { .offset = 96, .value = 0x2046 }, - { .offset = 97, .value = 0xfe9d }, -@@ -2538,6 +2599,7 @@ static const struct board_info __initcon - #ifdef CONFIG_BCM63XX_CPU_6318 - &board_96318ref, - &board_96318ref_p300, -+ &board_AR5315u, - &board_dsl_2751b_d1, - &board_FAST2704N, - #endif -@@ -2643,6 +2705,7 @@ static struct of_device_id const bcm963x - #ifdef CONFIG_BCM63XX_CPU_6318 - { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, }, - { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, }, -+ { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, }, - { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, }, - { .compatible = "sagem,fast-2704n", .data = &board_FAST2704N, }, - #endif diff --git a/target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch b/target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch deleted file mode 100644 index a48ecf961c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/580-board_AD1018.patch +++ /dev/null @@ -1,92 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -357,6 +357,73 @@ static struct board_info __initdata boar - }, - }; - -+static struct sprom_fixup __initdata ad1018_fixups[] = { -+ { .offset = 6, .value = 0x1c00 }, -+ { .offset = 65, .value = 0x1256 }, -+ { .offset = 96, .value = 0x2046 }, -+ { .offset = 97, .value = 0xfe69 }, -+ { .offset = 98, .value = 0x1726 }, -+ { .offset = 99, .value = 0xfa5c }, -+ { .offset = 112, .value = 0x2046 }, -+ { .offset = 113, .value = 0xfea8 }, -+ { .offset = 114, .value = 0x1978 }, -+ { .offset = 115, .value = 0xfa26 }, -+ { .offset = 161, .value = 0x2222 }, -+ { .offset = 169, .value = 0x2222 }, -+ { .offset = 171, .value = 0x2222 }, -+ { .offset = 173, .value = 0x2222 }, -+ { .offset = 174, .value = 0x4444 }, -+ { .offset = 175, .value = 0x2222 }, -+ { .offset = 176, .value = 0x4444 }, -+}; -+ -+static struct board_info __initdata board_AD1018 = { -+ .name = "96328avngr", -+ .expected_cpu_id = 0x6328, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 1, -+ -+ .has_ohci0 = 1, -+ .has_ehci0 = 1, -+ .num_usbh_ports = 1, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "FIBRE", -+ }, -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "LAN3", -+ }, -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "LAN2", -+ }, -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "LAN1", -+ }, -+ }, -+ }, -+ -+ .fallback_sprom = { -+ .type = SPROM_BCM43217, -+ .pci_bus = 1, -+ .pci_dev = 0, -+ .board_fixups = ad1018_fixups, -+ .num_board_fixups = ARRAY_SIZE(ad1018_fixups), -+ }, -+}; -+ - static struct sprom_fixup __initdata ar5381u_fixups[] = { - { .offset = 97, .value = 0xfee5 }, - { .offset = 98, .value = 0x157c }, -@@ -2605,6 +2672,7 @@ static const struct board_info __initcon - #endif - #ifdef CONFIG_BCM63XX_CPU_6328 - &board_96328avng, -+ &board_AD1018, - &board_AR5381u, - &board_AR5387un, - &board_963281TAN, -@@ -2719,6 +2787,7 @@ static struct of_device_id const bcm963x - { .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, }, - { .compatible = "nucom,r5010un-v2", .data = &board_R5010UNV2, }, - { .compatible = "sagem,fast-2704-v2", .data = &board_FAST2704V2, }, -+ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, }, - #endif - #ifdef CONFIG_BCM63XX_CPU_6338 - { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, diff --git a/target/linux/bcm63xx/patches-4.14/598-board_sr102.patch b/target/linux/bcm63xx/patches-4.14/598-board_sr102.patch deleted file mode 100644 index c8db6c1366..0000000000 --- a/target/linux/bcm63xx/patches-4.14/598-board_sr102.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c -+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c -@@ -2654,6 +2654,49 @@ static struct board_info __initdata boar - }, - }, - }; -+ -+static struct board_info __initdata board_BSKYB_63168 = { -+ .name = "BSKYB_63168", -+ .expected_cpu_id = 0x63268, -+ -+ .has_pci = 1, -+ .use_fallback_sprom = 0, -+ -+ .has_ehci0 = 1, -+ .has_ohci0 = 1, -+ .num_usbh_ports = 2, -+ -+ .has_enetsw = 1, -+ -+ .enetsw = { -+ .used_ports = { -+ [0] = { -+ .used = 1, -+ .phy_id = 1, -+ .name = "Port 1", -+ }, -+ -+ [1] = { -+ .used = 1, -+ .phy_id = 2, -+ .name = "Port 2", -+ }, -+ -+ [2] = { -+ .used = 1, -+ .phy_id = 3, -+ .name = "Port 3", -+ }, -+ -+ [3] = { -+ .used = 1, -+ .phy_id = 4, -+ .name = "Port 4", -+ }, -+ -+ }, -+ }, -+}; - #endif /* CONFIG_BCM63XX_CPU_63268 */ - - /* -@@ -2762,6 +2805,7 @@ static const struct board_info __initcon - &board_963268bu_p300, - &board_963269bhr, - &board_vw6339gu, -+ &board_BSKYB_63168, - #endif - }; - -@@ -2874,6 +2918,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm963268bu-p300", .data = &board_963268bu_p300, }, - { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, }, - { .compatible = "inteno,vg50", .data = &board_vw6339gu, }, -+ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, }, - #endif - #endif /* CONFIG_OF */ - { }, diff --git a/target/linux/bcm63xx/patches-4.14/800-wl_exports.patch b/target/linux/bcm63xx/patches-4.14/800-wl_exports.patch deleted file mode 100644 index 5f5b1c2e6c..0000000000 --- a/target/linux/bcm63xx/patches-4.14/800-wl_exports.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/arch/mips/bcm63xx/nvram.c -+++ b/arch/mips/bcm63xx/nvram.c -@@ -24,6 +24,12 @@ - static struct bcm963xx_nvram nvram; - static int mac_addr_used; - -+/* -+ * Required export for WL -+ */ -+u32 nvram_buf[5] = { 0, cpu_to_le32(20), 0, 0, 0 }; -+EXPORT_SYMBOL(nvram_buf); -+ - void __init bcm63xx_nvram_init(void *addr) - { - u32 crc, expected_crc; ---- a/arch/mips/mm/cache.c -+++ b/arch/mips/mm/cache.c -@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s - void (*_dma_cache_inv)(unsigned long start, unsigned long size); - - EXPORT_SYMBOL(_dma_cache_wback_inv); -+EXPORT_SYMBOL(_dma_cache_inv); - - #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */ - diff --git a/target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch b/target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch deleted file mode 100644 index 11a83536b7..0000000000 --- a/target/linux/bcm63xx/patches-4.14/801-ssb_export_fallback_sprom.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/bcm63xx/sprom.c -+++ b/arch/mips/bcm63xx/sprom.c -@@ -8,6 +8,7 @@ - */ - - #include -+#include - #include - #include - #include -@@ -387,7 +388,19 @@ struct fallback_sprom_match { - struct ssb_sprom sprom; - }; - --static struct fallback_sprom_match fallback_sprom; -+struct fallback_sprom_match fallback_sprom; -+ -+int bcm63xx_get_fallback_sprom(uint pci_bus, uint pci_slot, struct ssb_sprom *out) -+{ -+ if (pci_bus != fallback_sprom.pci_bus || -+ pci_slot != fallback_sprom.pci_dev) -+ pr_warn("fallback_sprom: pci bus/device num mismatch: expected %i/%i, but got %i/%i\n", -+ fallback_sprom.pci_bus, fallback_sprom.pci_dev, -+ pci_bus, pci_slot); -+ memcpy(out, &fallback_sprom.sprom, sizeof(struct ssb_sprom)); -+ return 0; -+} -+EXPORT_SYMBOL(bcm63xx_get_fallback_sprom); - - #if defined(CONFIG_SSB_PCIHOST) - int bcm63xx_get_fallback_ssb_sprom(struct ssb_bus *bus, struct ssb_sprom *out) diff --git a/target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch b/target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch deleted file mode 100644 index 2aca2f3f74..0000000000 --- a/target/linux/bcm63xx/patches-4.14/802-rtl8367r_fix_RGMII_support.patch +++ /dev/null @@ -1,30 +0,0 @@ -From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001 -From: Miguel GAIO -Date: Fri, 6 Jul 2012 14:12:33 +0200 -Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support - ---- - drivers/net/phy/rtl8367.c | 5 +++++ - 1 files changed, 5 insertions(+), 0 deletions(-) - ---- a/drivers/net/phy/rtl8367.c -+++ b/drivers/net/phy/rtl8367.c -@@ -146,6 +146,10 @@ - #define RTL8367_EXT_RGMXF_TXDELAY_MASK 1 - #define RTL8367_EXT_RGMXF_RXDELAY_MASK 0x7 - -+#define RTL8367_PHY_AD_REG 0x130f -+#define RTL8370_PHY_AD_DUMMY_1_OFFSET 5 -+#define RTL8370_PHY_AD_DUMMY_1_MASK 0xe0 -+ - #define RTL8367_DI_FORCE_REG(_x) (0x1310 + (_x)) - #define RTL8367_DI_FORCE_MODE BIT(12) - #define RTL8367_DI_FORCE_NWAY BIT(7) -@@ -897,6 +901,7 @@ static int rtl8367_extif_set_mode(struct - case RTL8367_EXTIF_MODE_RGMII_33V: - REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367); - REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777); -+ REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0); - break; - - case RTL8367_EXTIF_MODE_TMII_MAC: diff --git a/target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch b/target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch deleted file mode 100644 index 7a3c2f01c2..0000000000 --- a/target/linux/bcm63xx/patches-4.14/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch +++ /dev/null @@ -1,26 +0,0 @@ -From ff3409ab17d56450943364ba49a16960e3cdda9b Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Sun, 6 Apr 2014 22:33:16 +0200 -Subject: [RFC] jffs2: work around unaligned accesses failing on bcm63xx/smp - -Unligned memcpy_fromio randomly fails with an unaligned dst. Work around -it by ensuring we are always doing aligned copies. - -Should fix filename corruption in jffs2 with SMP. - -Signed-off-by: Jonas Gorski ---- - fs/jffs2/nodelist.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/fs/jffs2/nodelist.h -+++ b/fs/jffs2/nodelist.h -@@ -259,7 +259,7 @@ struct jffs2_full_dirent - uint32_t ino; /* == zero for unlink */ - unsigned int nhash; - unsigned char type; -- unsigned char name[0]; -+ unsigned char name[0] __attribute__((aligned((sizeof(long))))); - }; - - /* diff --git a/target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch b/target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch deleted file mode 100644 index 2d990f78e8..0000000000 --- a/target/linux/bcm63xx/patches-4.14/804-bcm63xx_enet_63268_rgmii_ports.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c -+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c -@@ -2239,6 +2239,10 @@ static int bcm_enetsw_open(struct net_de - - rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i)); - rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN; -+ if (BCMCPU_IS_63268()) { -+ rgmii_ctrl |= ENETSW_RGMII_CTRL_TIMING_SEL_EN; -+ rgmii_ctrl |= ENETSW_RGMII_CTRL_MII_OVERRIDE_EN; -+ } - enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i)); - } -