From: John Crispin <john@openwrt.org>
Date: Wed, 24 Mar 2010 15:55:23 +0000 (+0000)
Subject: adds support for airties wav-281/arcor a800/arcaydian arv452
X-Git-Tag: reboot~20521
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ee9ed69f0ff6c39776b50cd45aad66a62395a666;p=openwrt%2Fstaging%2Fpepe2k.git

adds support for airties wav-281/arcor a800/arcaydian arv452

SVN-Revision: 20402
---

diff --git a/target/linux/ifxmips/patches-2.6.30/500-arv452.patch b/target/linux/ifxmips/patches-2.6.30/500-arv452.patch
new file mode 100644
index 0000000000..77dcb7a2e2
--- /dev/null
+++ b/target/linux/ifxmips/patches-2.6.30/500-arv452.patch
@@ -0,0 +1,79 @@
+Index: linux-2.6.30.10/arch/mips/ifxmips/board.c
+===================================================================
+--- linux-2.6.30.10.orig/arch/mips/ifxmips/board.c	2010-03-24 16:45:31.000000000 +0100
++++ linux-2.6.30.10/arch/mips/ifxmips/board.c	2010-03-24 16:53:18.000000000 +0100
+@@ -52,6 +52,7 @@
+ 	EASY50712,
+ 	EASY4010,
+ 	ARV4519,
++	ARV452,
+ };
+ 
+ extern int ifxmips_pci_external_clock;
+@@ -141,6 +142,15 @@
+ 	{ .name = "ifx:green:usb", .gpio = 19, .active_low = 1, },
+ };
+ 
++static struct gpio_led arv452_gpio_leds[] = {
++	{ .name = "ifx:blue:power", .gpio = 3, .active_low = 1, },
++	{ .name = "ifx:blue:adsl", .gpio = 4, .active_low = 1, },
++	{ .name = "ifx:pink:internet", .gpio = 5, .active_low = 1, },
++	{ .name = "ifx:red:power", .gpio = 6, .active_low = 1, },
++	{ .name = "ifx:yello:wps", .gpio = 7, .active_low = 1, },
++	{ .name = "ifx:red:wps", .gpio = 9, .active_low = 1, },
++};
++
+ static struct gpio_led_platform_data ifxmips_gpio_led_data;
+ 
+ static struct platform_device ifxmips_gpio_leds = {
+@@ -192,6 +202,14 @@
+ #endif
+ };
+ 
++struct platform_device *arv542_devs[] = {
++	/*&ifxmips_gpio,*/ &ifxmips_mii, &ifxmips_mtd,
++	&ifxmips_gpio_dev, &ifxmips_wdt, &dwc_usb,
++#ifdef CONFIG_LEDS_GPIO
++	&ifxmips_gpio_leds,
++#endif
++};
++
+ static struct gpio_led easy50712_leds[] = {
+ 	{ .name = "ifx:green:test0", .gpio = 0,},
+ 	{ .name = "ifx:green:test1", .gpio = 1,},
+@@ -237,7 +255,20 @@
+ 		.devs = arv5419_devs,
+ 		.reset_resource = {.name = "reset", .start = 1, .end = 14},
+ 		.pci_external_clock = 1,
++#ifdef CONFIG_LEDS_GPIO
+ 		.gpio_leds = arv4519_gpio_leds,
++#endif
++	}, {
++		/* arcaydian annex-b board used by airties, arcor */
++		.type = ARV452,
++		.name = "ARV452",
++		.system_type = SYSTEM_DANUBE_CHIPID2,
++		.devs = arv542_devs,
++		.reset_resource = {.name = "reset", .start = 1, .end = 14},
++		.pci_external_clock = 1,
++#ifdef CONFIG_LEDS_GPIO
++		.gpio_leds = arv452_gpio_leds,
++#endif
+ 	},
+ };
+ 
+@@ -382,6 +413,14 @@
+ 		ifxmips_gpio_led_data.num_leds = ARRAY_SIZE(arv4519_gpio_leds);
+ #endif
+ 		break;
++	case ARV452:
++		/* set some sane defaults for the gpios */
++		board->num_devs = ARRAY_SIZE(arv542_devs);
++		ifxmips_w32(0x8001e7ff, IFXMIPS_EBU_BUSCON1);
++#ifdef CONFIG_LEDS_GPIO
++		ifxmips_gpio_led_data.num_leds = ARRAY_SIZE(arv452_gpio_leds);
++#endif
++		break;
+ 	}
+ #ifdef CONFIG_LEDS_GPIO
+ 	ifxmips_gpio_led_data.leds = board->gpio_leds;