From: Mikhail Zhilkin Date: Sun, 20 Oct 2024 12:21:33 +0000 (+0000) Subject: mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ee8df790cae843f11f78511dd9ffac7e80a4d707;p=openwrt%2Fstaging%2Fnbd.git mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout This commit adds OpenWrt U-Boot (UBI) layout support for MERCUSYS MR90X v1. Stock U-Boot UBI size: 50 MiB OpenWrt U-boot UBI size: 126 MiB Install ------- 1. Perform steps 1-14 of the OpenWrt installation guide (use OpenWrt initramfs-recovery.itb instead of initramfs-kernel.bin at the step 10, 12 and 14). Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation 2. Make backups: ``` cat /dev/mtd0 > /tmp/boot.bin cat /dev/mtd5 > /tmp/tp_data.bin ``` Copy /tp_data dir content, /tmp/boot.bin and /tmp/tp_data.bin and to your PC using scp. You can also backup the remaining partititons. Copy backups to a safe place, they are required for the next steps and stock firmware recovery. 3. Reboot to OpenWrt initramfs: ``` reboot ``` 4. Copy OpenWrt ubi-bl31-uboot.fip, ubi-preloader.bin, ubi-squashfs-sysupgrade.itb and MT7986_EEPROM.bin, default-mac (from /tp_data backup) to the /tmp folder of the router using scp. 5. Prepare UBI: ``` ubidetach -p /dev/mtd3; ubiformat /dev/mtd3 -y; ubiattach -p /dev/mtd3 ubimkvol /dev/ubi0 -N fip -t static -s 1MiB ubiupdatevol /dev/ubi0_0 /tmp/ubi-bl31-uboot.fip ubimkvol /dev/ubi0 -N ubootenv -s 0x1f000 ubimkvol /dev/ubi0 -N ubootenv2 -s 0x1f000 ``` 6. Install kmod-mtd-rw and unlock partitions: ``` opkg update && opkg install kmod-mtd-rw insmod mtd-rw i_want_a_brick=1 mtd unlock boot mtd unlock bl2 mtd unlock factory ``` 7. Prepare "factory" partition: ``` dd if=/dev/zero bs=$((0x8000)) count=1 | tr '\000' '\377' > /tmp/factory.bin dd if=/tmp/MT7986_EEPROM.bin of=/tmp/factory.bin conv=notrunc dd if=/tmp/default-mac >> /tmp/factory.bin ``` 8. Write "factory" partition: ``` mtd erase factory mtd write /tmp/factory.bin factory ``` 9. Write preloader partition: ``` mtd erase bl2 mtd write /tmp/ubi-preloader.bin bl2 ``` 10. Write OpenWrt sysupgrade image: ``` sysupgrade -n /tmp/ubi-squashfs-sysupgrade.itb ``` Recovery -------- 1. Place OpenWrt initramfs-recovery.itb image (with original name) on the tftp server (IP: 192.168.1.254). 2. Press "reset" button and power on the router. After ~10 sec release the button. 3. Use OpenWrt initramfs system for recovery. BL2 and FIP recovery -------------------- Use mtk_uartboot and UART connetion if BL2 or FIP in UBI is destroyed: Link: https://github.com/981213/mtk_uartboot Link: https://openwrt.org/toh/mercusys/mr90x_v1#serial Return to stock: ---------------- 1. Copy "boot" partition backup (boot.bin) to the /tmp dir of the router using scp. 2. Install kmod-mtd-rw: ``` opkg update && opkg install kmod-mtd-rw ``` 3. Restore stock U-Boot: ``` insmod mtd-rw i_want_a_brick=1 mtd unlock boot mtd erase boot mtd write /tmp/boot.bin boot ``` 4. Erase UBI and reboot: ``` mtd erase ubi reboot ``` 5. Open U-Boot web recovery, upload stock firmware image and start upgrade. Link: http://192.168.1.1 6. Complete steps 1-9 of the OpenWrt installation guide to get root rights. Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation 7. Upload "tp_data" partition backup (tp_data.bin) to the /tmp folder of the router using scp. 8. Restore stock calibrations: ``` mtd write /tmp/tp_data.bin tp_data reboot ``` 9. Perform "factory restore" via stock firmware web interface. Signed-off-by: Mikhail Zhilkin Link: https://github.com/openwrt/openwrt/pull/16744 Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 58db7dad28..5bde699a47 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -36,6 +36,7 @@ case "$board" in abt,asr3000|\ h3c,magic-nx30-pro|\ jcg,q30-pro|\ +mercusys,mr90x-v1-ubi|\ netcore,n60|\ nokia,ea0326gmp|\ qihoo,360t7|\ diff --git a/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1-common.dtsi b/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1-common.dtsi new file mode 100644 index 0000000000..5522c58af2 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1-common.dtsi @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: (GL-2.0 OR MIT) + +/dts-v1/; +#include +#include +#include + +#include "mt7986b.dtsi" + +/ { + aliases: aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_green; + led-running = &led_status_green; + led-upgrade = &led_status_green; + + serial0 = &uart0; + }; + + chosen: chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0 0x40000000 0 0x20000000>; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-2 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <0>; + gpios = <&pio 12 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + }; + + led-4 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 16 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + + led_status_green: led-5 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 17 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy6>; + phy-mode = "2500base-x"; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + #address-cells = <1>; + #size-cells = <0>; + + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + reset-delay-us = <1500000>; + reset-post-delay-us = <1000000>; + + /* WAN/LAN 2.5Gbps phy + MaxLinear GPY211C0VC (SLNW8) */ + phy6: phy@6 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <6>; + }; + + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* WAN/LAN 1Gbps port */ + port@0 { + reg = <0>; + label = "lan0"; + }; + + /* LAN1 port */ + port@1 { + reg = <1>; + label = "lan1"; + }; + + /* LAN2 port */ + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&pio { + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + spi_nand_flash: flash@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&wf_2g_5g_pins>; + + ieee80211-freq-limit = <2400000 2500000>, <5170000 5835000>; +}; diff --git a/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1-ubi.dts b/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1-ubi.dts new file mode 100644 index 0000000000..cfa195034d --- /dev/null +++ b/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1-ubi.dts @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GL-2.0 OR MIT) + +#include "mt7986b-mercusys-mr90x-v1-common.dtsi" + +/ { + compatible = "mercusys,mr90x-v1-ubi", "mediatek,mt7986b"; + model = "MERCUSYS MR90X v1 (UBI)"; +}; + +&aliases { + label-mac-device = &gmac0; +}; + +&chosen { + bootargs-append = " root=/dev/fit0 rootwait"; + rootdisk = <&ubi_fit>; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_8000 0>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&macaddr_factory_8000 1>; + nvmem-cell-names = "mac-address"; +}; + +&partitions { + partition@0 { + label = "boot"; + reg = <0x0 0x200000>; + read-only; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "factory"; + reg = <0x100000 0x100000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_8000: macaddr@8000 { + compatible = "mac-base"; + reg = <0x8000 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + + partition@200000 { + compatible = "linux,ubi"; + reg = <0x200000 0x7e00000>; + label = "ubi"; + + volumes { + ubi_fit: ubi-volume-fit { + volname = "fit"; + }; + + ubi_ubootenv: ubi-volume-ubootenv { + volname = "ubootenv"; + }; + + ubi_ubootenv2: ubi-volume-ubootenv2 { + volname = "ubootenv2"; + }; + }; + }; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&ubi_ubootenv { + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; +}; + +&ubi_ubootenv2 { + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; +}; + +&wifi { + nvmem-cells = <&eeprom_factory_0>; + nvmem-cell-names = "eeprom"; + + band@0 { + reg = <0>; + nvmem-cells = <&macaddr_factory_8000 0>; + nvmem-cell-names = "mac-address"; + }; + + band@1 { + reg = <1>; + nvmem-cells = <&macaddr_factory_8000 (-1)>; + nvmem-cell-names = "mac-address"; + }; +}; diff --git a/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts b/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts index f0a995820e..16d890a393 100644 --- a/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts +++ b/target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts @@ -1,286 +1,44 @@ // SPDX-License-Identifier: (GL-2.0 OR MIT) -/dts-v1/; -#include -#include -#include - -#include "mt7986b.dtsi" +#include "mt7986b-mercusys-mr90x-v1-common.dtsi" / { compatible = "mercusys,mr90x-v1", "mediatek,mt7986b"; model = "MERCUSYS MR90X v1"; - - aliases { - serial0 = &uart0; - - led-boot = &led_status_green; - led-failsafe = &led_status_green; - led-running = &led_status_green; - led-upgrade = &led_status_green; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - reg = <0 0x40000000 0 0x20000000>; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&pio 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - gpios = <&pio 7 GPIO_ACTIVE_LOW>; - }; - - led-1 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - gpios = <&pio 9 GPIO_ACTIVE_LOW>; - }; - - led-2 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <0>; - gpios = <&pio 12 GPIO_ACTIVE_LOW>; - }; - - led-3 { - color = ; - function = LED_FUNCTION_WAN; - gpios = <&pio 13 GPIO_ACTIVE_LOW>; - }; - - led-4 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&pio 16 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_status_green: led-5 { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&pio 17 GPIO_ACTIVE_HIGH>; - }; - }; }; -&crypto { - status = "okay"; -}; - -ð { - status = "okay"; - - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "2500base-x"; - - fixed-link { - speed = <2500>; - full-duplex; - pause; - }; +&partitions { + partition@0 { + label = "boot"; + reg = <0x0 0x200000>; + read-only; }; - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy6>; - phy-mode = "2500base-x"; + partition@200000 { + label = "u-boot-env"; + reg = <0x200000 0x100000>; }; - mdio: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; + partition@300000 { + label = "ubi0"; + reg = <0x300000 0x3200000>; }; -}; - -&mdio { - #address-cells = <1>; - #size-cells = <0>; - - reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; - reset-delay-us = <1500000>; - reset-post-delay-us = <1000000>; - /* WAN/LAN 2.5Gbps phy - MaxLinear GPY211C0VC (SLNW8) */ - phy6: phy@6 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <6>; + partition@3500000 { + label = "ubi1"; + reg = <0x3500000 0x3200000>; + read-only; }; - switch: switch@1f { - compatible = "mediatek,mt7531"; - reg = <31>; - reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + partition@6700000 { + label = "userconfig"; + reg = <0x6700000 0x800000>; + read-only; }; -}; - -&switch { - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* WAN/LAN 1Gbps port */ - port@0 { - reg = <0>; - label = "lan0"; - }; - /* LAN1 port */ - port@1 { - reg = <1>; - label = "lan1"; - }; - - /* LAN2 port */ - port@2 { - reg = <2>; - label = "lan2"; - }; - - port@6 { - reg = <6>; - ethernet = <&gmac0>; - phy-mode = "2500base-x"; - - fixed-link { - speed = <2500>; - full-duplex; - pause; - }; - }; - }; -}; - -&pio { - spi_flash_pins: spi-flash-pins-33-to-38 { - mux { - function = "spi"; - groups = "spi0", "spi0_wp_hold"; - }; - conf-pu { - pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; - drive-strength = <8>; - mediatek,pull-up-adv = <0>; /* bias-disable */ - }; - conf-pd { - pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; - drive-strength = <8>; - mediatek,pull-down-adv = <0>; /* bias-disable */ - }; - }; - - wf_2g_5g_pins: wf_2g_5g-pins { - mux { - function = "wifi"; - groups = "wf_2g", "wf_5g"; - }; - conf { - pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", - "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", - "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", - "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", - "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", - "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", - "WF1_TOP_CLK", "WF1_TOP_DATA"; - drive-strength = <4>; - }; - }; -}; - -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi_flash_pins>; - status = "okay"; - - spi_nand_flash: flash@0 { - compatible = "spi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - - spi-max-frequency = <20000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - - partitions: partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "boot"; - reg = <0x0 0x200000>; - read-only; - }; - - partition@200000 { - label = "u-boot-env"; - reg = <0x200000 0x100000>; - }; - - partition@300000 { - label = "ubi0"; - reg = <0x300000 0x3200000>; - }; - - partition@3500000 { - label = "ubi1"; - reg = <0x3500000 0x3200000>; - read-only; - }; - - partition@6700000 { - label = "userconfig"; - reg = <0x6700000 0x800000>; - read-only; - }; - - partition@6f00000 { - label = "tp_data"; - reg = <0x6f00000 0x400000>; - read-only; - }; - }; + partition@6f00000 { + label = "tp_data"; + reg = <0x6f00000 0x400000>; + read-only; }; }; - -&trng { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&watchdog { - status = "okay"; -}; - -&wifi { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&wf_2g_5g_pins>; -}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 38c4b7525b..64df50eb0a 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -49,7 +49,8 @@ glinet,gl-xe3000) ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wifi2g" "phy0-ap0" ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wifi5g" "phy1-ap0" ;; -mercusys,mr90x-v1) +mercusys,mr90x-v1|\ +mercusys,mr90x-v1-ubi) ucidef_set_led_netdev "lan-0" "lan-0" "green:lan-0" "lan0" "link tx rx" ucidef_set_led_netdev "lan-1" "lan-1" "green:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan-2" "lan-2" "green:lan-2" "lan2" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 953d96d09c..ba78564402 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -106,7 +106,8 @@ mediatek_setup_interfaces() mediatek,mt7988a-rfb) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 eth2" eth1 ;; - mercusys,mr90x-v1) + mercusys,mr90x-v1|\ + mercusys,mr90x-v1-ubi) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1 ;; tplink,tl-xdr6086|\ diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 0040ffbb26..fb48ffc49f 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -76,6 +76,7 @@ platform_do_upgrade() { jdcloud,re-cp-03|\ mediatek,mt7981-rfb|\ mediatek,mt7988a-rfb|\ + mercusys,mr90x-v1-ubi|\ nokia,ea0326gmp|\ openwrt,one|\ netcore,n60|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index ddd23f4d64..5498922f6e 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1079,6 +1079,34 @@ define Device/mercusys_mr90x-v1 endef TARGET_DEVICES += mercusys_mr90x-v1 +define Device/mercusys_mr90x-v1-ubi + DEVICE_VENDOR := MERCUSYS + DEVICE_MODEL := MR90X v1 (UBI) + DEVICE_DTS := mt7986b-mercusys-mr90x-v1-ubi + DEVICE_DTS_DIR := ../dts + DEVICE_DTC_FLAGS := --pad 4096 + DEVICE_DTS_LOADADDR := 0x43f00000 + DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_IN_UBI := 1 + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \ + pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | \ + append-metadata + ARTIFACTS := bl31-uboot.fip preloader.bin + ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot mercusys_mr90x-v1 + ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ubi-ddr3 +endef +TARGET_DEVICES += mercusys_mr90x-v1-ubi + define Device/netcore_n60 DEVICE_VENDOR := Netcore DEVICE_MODEL := N60