From: Shiji Yang Date: Thu, 4 Jul 2024 10:35:50 +0000 (+0800) Subject: ath79: suppress GPIO static base allocation warning X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ee01666cd32e156214fe1ebc250c5c9ed7256aba;p=openwrt%2Fstaging%2Fnbd.git ath79: suppress GPIO static base allocation warning Silence ath79 GPIO driver warning by setting GPIO numberspace base dynamically. This patch also reorganize and fix the GPIO numbers on 6.6 kernel. The new gpio chip base number algorithm: gpiochip ath79-SOC ath9k-0 ath9k-1 base 512 512+ngpios 512+ngpios+10 Signed-off-by: Shiji Yang Link: https://github.com/openwrt/openwrt/pull/15784 Signed-off-by: Robert Marko --- diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches index dffd412d10..d5b41dc0b8 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches @@ -11,62 +11,62 @@ board=$(board_name) case "$board" in adtran,bsap1800-v2|\ adtran,bsap1840) - ucidef_add_gpio_switch "wifi1_ext_a" "5GHz External Antenna A" "492" "1" - ucidef_add_gpio_switch "wifi1_int_a" "5GHz Internal Antenna A" "493" - ucidef_add_gpio_switch "wifi1_ext_b" "5GHz External Antenna B" "494" "1" - ucidef_add_gpio_switch "wifi1_int_b" "5GHz Internal Antenna B" "495" - ucidef_add_gpio_switch "wifi1_ext_c" "5GHz External Antenna C" "496" "1" - ucidef_add_gpio_switch "wifi1_int_c" "5GHz Internal Antenna C" "497" - ucidef_add_gpio_switch "wifi0_ext_a" "2.4GHz External Antenna A" "505" "1" - ucidef_add_gpio_switch "wifi0_int_a" "2.4GHz Internal Antenna A" "506" - ucidef_add_gpio_switch "wifi0_ext_b" "2.4GHz External Antenna B" "507" "1" - ucidef_add_gpio_switch "wifi0_int_b" "2.4GHz Internal Antenna B" "508" - ucidef_add_gpio_switch "wifi0_ext_c" "2.4GHz External Antenna C" "509" "1" - ucidef_add_gpio_switch "wifi0_int_c" "2.4GHz Internal Antenna C" "510" + ucidef_add_gpio_switch "wifi1_ext_a" "5GHz External Antenna A" "534" "1" + ucidef_add_gpio_switch "wifi1_int_a" "5GHz Internal Antenna A" "535" + ucidef_add_gpio_switch "wifi1_ext_b" "5GHz External Antenna B" "536" "1" + ucidef_add_gpio_switch "wifi1_int_b" "5GHz Internal Antenna B" "537" + ucidef_add_gpio_switch "wifi1_ext_c" "5GHz External Antenna C" "538" "1" + ucidef_add_gpio_switch "wifi1_int_c" "5GHz Internal Antenna C" "539" + ucidef_add_gpio_switch "wifi0_ext_a" "2.4GHz External Antenna A" "527" "1" + ucidef_add_gpio_switch "wifi0_int_a" "2.4GHz Internal Antenna A" "528" + ucidef_add_gpio_switch "wifi0_ext_b" "2.4GHz External Antenna B" "529" "1" + ucidef_add_gpio_switch "wifi0_int_b" "2.4GHz Internal Antenna B" "530" + ucidef_add_gpio_switch "wifi0_ext_c" "2.4GHz External Antenna C" "531" "1" + ucidef_add_gpio_switch "wifi0_int_c" "2.4GHz Internal Antenna C" "532" ;; asus,pl-ac56) - ucidef_add_gpio_switch "plc_enable" "PLC enable" "14" "1" + ucidef_add_gpio_switch "plc_enable" "PLC enable" "526" "1" ;; comfast,cf-e5|\ telco,t1) - ucidef_add_gpio_switch "lte_power" "LTE Power" "14" "1" - ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "11" "1" - ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "1" "1" - ucidef_add_gpio_switch "lte_reset" "LTE Reset" "12" "1" + ucidef_add_gpio_switch "lte_power" "LTE Power" "526" "1" + ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "523" "1" + ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "513" "1" + ucidef_add_gpio_switch "lte_reset" "LTE Reset" "524" "1" ;; devolo,dlan-pro-1200plus-ac) - ucidef_add_gpio_switch "plc_enable" "PLC enable" "13" "0" + ucidef_add_gpio_switch "plc_enable" "PLC enable" "525" "0" ;; devolo,magic-2-wifi) - ucidef_add_gpio_switch "plc_pairing" "PLC pairing" "11" "1" - ucidef_add_gpio_switch "plc_enable" "PLC enable" "13" "1" + ucidef_add_gpio_switch "plc_pairing" "PLC pairing" "523" "1" + ucidef_add_gpio_switch "plc_enable" "PLC enable" "525" "1" ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "20" "0" + ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "532" "0" ;; librerouter,librerouter-v1) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "513" "0" ;; teltonika,rut955) - ucidef_add_gpio_switch "sim_sel" "SIM select" "503" "1" - ucidef_add_gpio_switch "DOUT1" "DOUT1 (OC)" "504" "0" - ucidef_add_gpio_switch "DOUT2" "DOUT2 (Relay)" "505" "0" - ucidef_add_gpio_switch "modem_vbus" "Modem enable" "506" "1" - ucidef_add_gpio_switch "modem_rst" "Modem reset" "507" "0" - ucidef_add_gpio_switch "DOUT3" "DOUT3" "508" "0" + ucidef_add_gpio_switch "sim_sel" "SIM select" "542" "1" + ucidef_add_gpio_switch "DOUT1" "DOUT1 (OC)" "543" "0" + ucidef_add_gpio_switch "DOUT2" "DOUT2 (Relay)" "544" "0" + ucidef_add_gpio_switch "modem_vbus" "Modem enable" "545" "1" + ucidef_add_gpio_switch "modem_rst" "Modem reset" "546" "0" + ucidef_add_gpio_switch "DOUT3" "DOUT3" "547" "0" ;; teltonika,rut955-h7v3c0) - ucidef_add_gpio_switch "sim_sel" "SIM select" "503" "1" - ucidef_add_gpio_switch "DOUT1" "DOUT1 (OC)" "504" "0" - ucidef_add_gpio_switch "DOUT2" "DOUT2 (Relay)" "505" "0" - ucidef_add_gpio_switch "modem_vbus" "Modem enable" "508" "1" - ucidef_add_gpio_switch "modem_rst" "Modem reset" "509" "0" + ucidef_add_gpio_switch "sim_sel" "SIM select" "542" "1" + ucidef_add_gpio_switch "DOUT1" "DOUT1 (OC)" "543" "0" + ucidef_add_gpio_switch "DOUT2" "DOUT2 (Relay)" "544" "0" + ucidef_add_gpio_switch "modem_vbus" "Modem enable" "547" "1" + ucidef_add_gpio_switch "modem_rst" "Modem reset" "548" "0" ;; tplink,archer-c25-v1) - ucidef_add_gpio_switch "led_control" "LED control" "21" "0" - ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1" + ucidef_add_gpio_switch "led_control" "LED control" "533" "0" + ucidef_add_gpio_switch "led_reset" "LED reset" "531" "1" ;; tplink,cpe210-v1|\ tplink,cpe220-v2|\ @@ -76,31 +76,31 @@ tplink,wbs210-v1|\ tplink,wbs210-v2|\ tplink,wbs510-v1|\ tplink,wbs510-v2) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "532" ;; ubnt,aircube-ac|\ ubnt,nanobeam-ac-gen2|\ ubnt,nanostation-ac) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "515" ;; ubnt,aircube-isp) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "523" ;; ubnt,nanostation-m) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "8" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "520" ;; ubnt,nanostation-m-xw) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "2" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "514" ;; ubnt,uk-ultra) - ucidef_add_gpio_switch "ant0_internal" "ANT0 Internal" "5" "1" - ucidef_add_gpio_switch "ant1_internal" "ANT1 Internal" "6" "1" + ucidef_add_gpio_switch "ant0_internal" "ANT0 Internal" "517" "1" + ucidef_add_gpio_switch "ant1_internal" "ANT1 Internal" "518" "1" ;; zbtlink,zbt-wd323) - ucidef_add_gpio_switch "io0" "IO#0" "0" - ucidef_add_gpio_switch "io1" "IO#1" "1" - ucidef_add_gpio_switch "io2" "IO#2" "2" - ucidef_add_gpio_switch "io14" "IO#14" "14" + ucidef_add_gpio_switch "io0" "IO#0" "512" + ucidef_add_gpio_switch "io1" "IO#1" "513" + ucidef_add_gpio_switch "io2" "IO#2" "514" + ucidef_add_gpio_switch "io14" "IO#14" "526" ;; esac diff --git a/target/linux/ath79/nand/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/nand/base-files/etc/board.d/03_gpio_switches index 775778a2be..1fe83bc65c 100644 --- a/target/linux/ath79/nand/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/nand/base-files/etc/board.d/03_gpio_switches @@ -11,7 +11,7 @@ board=$(board_name) case "$board" in zte,mf286a|\ zte,mf286r) - ucidef_add_gpio_switch "power_btn_block" "Power button blocker" "20" "0" + ucidef_add_gpio_switch "power_btn_block" "Power button blocker" "532" "0" ;; esac diff --git a/target/linux/ath79/patches-6.6/001-v6.11-gpio-ath79-convert-to-dynamic-GPIO-base-allocation.patch b/target/linux/ath79/patches-6.6/001-v6.11-gpio-ath79-convert-to-dynamic-GPIO-base-allocation.patch new file mode 100644 index 0000000000..4222639d4d --- /dev/null +++ b/target/linux/ath79/patches-6.6/001-v6.11-gpio-ath79-convert-to-dynamic-GPIO-base-allocation.patch @@ -0,0 +1,32 @@ +From 9a473c2a093e0d1c466bf86073230e2c8b658977 Mon Sep 17 00:00:00 2001 +From: Shiji Yang +Date: Wed, 26 Jun 2024 08:33:18 +0800 +Subject: gpio: ath79: convert to dynamic GPIO base allocation + +ath79 target has already been converted to device tree based platform. +Use dynamic GPIO numberspace base to suppress the warning: + +gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. + +Tested on Atheros AR7241 and AR9344. + +Signed-off-by: Shiji Yang +Suggested-by: Jonas Gorski +Link: https://lore.kernel.org/r/TYCP286MB089598EA71E964BD8AB9EFD3BCD62@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM +[Bartosz: tweaked the commit message] +Signed-off-by: Bartosz Golaszewski +--- + drivers/gpio/gpio-ath79.c | 2 -- + 1 file changed, 2 deletions(-) + +--- a/drivers/gpio/gpio-ath79.c ++++ b/drivers/gpio/gpio-ath79.c +@@ -273,8 +273,6 @@ static int ath79_gpio_probe(struct platf + dev_err(dev, "bgpio_init failed\n"); + return err; + } +- /* Use base 0 to stay compatible with legacy platforms */ +- ctrl->gc.base = 0; + + /* Optional interrupt setup */ + if (!np || of_property_read_bool(np, "interrupt-controller")) {