From: Yanase Yuki <dev@zpc.sakura.ne.jp>
Date: Wed, 31 May 2023 07:41:59 +0000 (+0900)
Subject: ipq40xx: convert Buffalo WTR-M2133HP to DSA
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=edb3a4162c0763ecc9d5e7660700a68a25bf28e3;p=openwrt%2Fstaging%2Fjogo.git

ipq40xx: convert Buffalo WTR-M2133HP to DSA

This commit convert WTR-M2133HP to DSA setup.

Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
---

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index d6b19c981e..b131d0d618 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -82,6 +82,7 @@ ipq40xx_setup_interfaces()
 		ucidef_set_interface_lan "sw-eth1 sw-eth2"
 		;;
 	aruba,ap-303h|\
+	buffalo,wtr-m2133hp|\
 	ezviz,cs-w3-wd1200g-eup|\
 	netgear,rbr50|\
 	netgear,rbs50|\
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
index f1d58ccba9..3260de23bd 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts
@@ -417,6 +417,35 @@
 	qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP";
 };
 
+&switch {
+	status = "okay";
+};
+
+&swport2 {
+	status = "okay";
+	label = "lan3";
+};
+
+&swport3 {
+	status = "okay";
+	label = "lan2";
+};
+
+&swport4 {
+	status = "okay";
+	label = "lan1";
+};
+
+&swport5 {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&macaddr_orgdata_20>;
+};
+
 &mdio {
 	status = "okay";
 	pinctrl-0 = <&mdio_pins>;
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 7c7a4acc5c..59d4f082ff 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -305,8 +305,7 @@ define Device/buffalo_wtr-m2133hp
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += buffalo_wtr-m2133hp
+TARGET_DEVICES += buffalo_wtr-m2133hp
 
 define Device/cellc_rtl30vw
 	KERNEL_SUFFIX := -zImage.itb