From: Pawel Dembicki Date: Tue, 6 Aug 2024 08:43:42 +0000 (+0200) Subject: mpc85xx: remove 6.1 kernel support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eda9509bbaf51c7b5bb6dc438e800fe3556601f5;p=openwrt%2Fstaging%2Fxback.git mpc85xx: remove 6.1 kernel support mpc85xx was switched to 6.6. We can remove 6.1 support now. Signed-off-by: Pawel Dembicki Link: https://github.com/openwrt/openwrt/pull/16087 Signed-off-by: Robert Marko --- diff --git a/target/linux/mpc85xx/config-6.1 b/target/linux/mpc85xx/config-6.1 deleted file mode 100644 index c017422714..0000000000 --- a/target/linux/mpc85xx/config-6.1 +++ /dev/null @@ -1,295 +0,0 @@ -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_ADVANCED_OPTIONS is not set -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_MMAP_RND_BITS=11 -CONFIG_ARCH_MMAP_RND_BITS_MAX=17 -CONFIG_ARCH_MMAP_RND_BITS_MIN=11 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_SPLIT_ARG64=y -CONFIG_ARCH_STACKWALK=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y -CONFIG_ASN1=y -CONFIG_AUDIT_ARCH=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOOKE=y -CONFIG_BOOKE_OR_40x=y -CONFIG_BOOKE_WDT=y -# CONFIG_BR200_WP is not set -# CONFIG_BSC9131_RDB is not set -# CONFIG_BSC9132_QDS is not set -# CONFIG_C293_PCIE is not set -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CLZ_TAB=y -CONFIG_CMDLINE="console=ttyS0,115200" -CONFIG_CMDLINE_FROM_BOOTLOADER=y -# CONFIG_CMDLINE_OVERRIDE is not set -# CONFIG_COMMON_CLK is not set -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -# CONFIG_CORENET_GENERIC is not set -# CONFIG_CPM2 is not set -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CRYPTO_AES_PPC_SPE is not set -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_UTILS=y -# CONFIG_CRYPTO_MD5_PPC is not set -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RSA=y -# CONFIG_CRYPTO_SHA1_PPC is not set -# CONFIG_CRYPTO_SHA1_PPC_SPE is not set -# CONFIG_CRYPTO_SHA256_PPC_SPE is not set -CONFIG_DATA_SHIFT=24 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_E500_CPU=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC=y -CONFIG_EDAC_ATOMIC_SCRUB=y -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_LEGACY_SYSFS=y -CONFIG_EDAC_MPC85XX=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -# CONFIG_FIREBOX_T10 is not set -CONFIG_FIXED_PHY=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_FSL_FMAN is not set -CONFIG_FSL_LBC=y -CONFIG_FSL_PCI=y -CONFIG_FSL_PQ_MDIO=y -CONFIG_FSL_SOC=y -CONFIG_FSL_SOC_BOOKE=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GEN_RTC=y -# CONFIG_GE_IMP3A is not set -CONFIG_GIANFAR=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MPC8XXX=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HIVEAP_330 is not set -CONFIG_HW_RANDOM=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_MPC=y -CONFIG_ILLEGAL_POINTER_VALUE=0 -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_ISA_DMA_API=y -CONFIG_KERNEL_START=0xc0000000 -# CONFIG_KSI8560 is not set -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOWMEM_CAM_NUM=9 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LXT_PHY=y -# CONFIG_MATH_EMULATION is not set -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MEMFD_CREATE=y -CONFIG_MIGRATION=y -CONFIG_MMU_GATHER_MERGE_VMAS=y -CONFIG_MMU_GATHER_PAGE_SIZE=y -CONFIG_MODULES_USE_ELF_RELA=y -# CONFIG_MPC8536_DS is not set -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_DS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC85xx_RDB is not set -CONFIG_MPIC=y -# CONFIG_MPIC_MSGR is not set -CONFIG_MPIC_TIMER=y -CONFIG_MPILIB=y -# CONFIG_MSM460 is not set -# CONFIG_MTD_CFI is not set -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NOR=y -# CONFIG_MVME2500 is not set -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NET_SELFTESTS=y -CONFIG_NLS=y -CONFIG_NR_CPUS=1 -CONFIG_NR_IRQS=512 -CONFIG_NVMEM=y -CONFIG_NVMEM_LAYOUTS=y -# CONFIG_NVMEM_QORIQ_EFUSE is not set -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DMA_DEFAULT_COHERENT=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND=y -# CONFIG_P1010_RDB is not set -# CONFIG_P1022_DS is not set -# CONFIG_P1022_RDK is not set -# CONFIG_P1023_RDB is not set -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_PAGE_POOL=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -# CONFIG_PANDA is not set -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEASPM=y -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_PERFORMANCE is not set -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLIB_LEDS=y -CONFIG_PHYSICAL_ALIGN=0x04000000 -CONFIG_PHYSICAL_START=0x00000000 -# CONFIG_PHYS_64BIT is not set -# CONFIG_PMU_SYSFS is not set -# CONFIG_PPA8548 is not set -CONFIG_PPC=y -CONFIG_PPC32=y -# CONFIG_PPC64 is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -CONFIG_PPC_ADV_DEBUG_DACS=2 -CONFIG_PPC_ADV_DEBUG_DVCS=0 -CONFIG_PPC_ADV_DEBUG_IACS=2 -CONFIG_PPC_ADV_DEBUG_REGS=y -CONFIG_PPC_BARRIER_NOSPEC=y -# CONFIG_PPC_BOOK3S_32 is not set -CONFIG_PPC_DOORBELL=y -CONFIG_PPC_E500=y -# CONFIG_PPC_E500MC is not set -# CONFIG_PPC_EARLY_DEBUG is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_KUAP=y -# CONFIG_PPC_KUAP_DEBUG is not set -CONFIG_PPC_KUEP=y -CONFIG_PPC_MMU_NOHASH=y -CONFIG_PPC_PAGE_SHIFT=12 -# CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT is not set -# CONFIG_PPC_QEMU_E500 is not set -CONFIG_PPC_SMP_MUXED_IPI=y -CONFIG_PPC_UDBG_16550=y -CONFIG_PPC_WERROR=y -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_QE_GPIO=y -CONFIG_QUICC_ENGINE=y -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RAS=y -# CONFIG_RED_15W_REV1 is not set -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_GENERIC=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -# CONFIG_SCOM_DEBUGFS is not set -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_SERIAL_QE is not set -# CONFIG_SOCRATES is not set -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPE=y -CONFIG_SPE_POSSIBLE=y -CONFIG_SPI=y -CONFIG_SPI_FSL_ESPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SRCU=y -# CONFIG_STATIC_CALL_SELFTEST is not set -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_STX_GP3 is not set -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_TARGET_CPU="8540" -CONFIG_TARGET_CPU_BOOL=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_THREAD_SHIFT=13 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TINY_SRCU=y -# CONFIG_TL_WDR4900_V1 is not set -# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_TWR_P102x is not set -CONFIG_UCC=y -CONFIG_UCC_FAST=y -CONFIG_UCC_GETH=y -# CONFIG_UGETH_TX_ON_DEMAND is not set -CONFIG_USB_SUPPORT=y -CONFIG_VDSO32=y -# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WS_AP3710I is not set -# CONFIG_WS_AP3715I is not set -# CONFIG_WS_AP3825I is not set -# CONFIG_XES_MPC85xx is not set -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_POWERPC=y diff --git a/target/linux/mpc85xx/patches-6.1/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-6.1/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch deleted file mode 100644 index 5e5ab10daf..0000000000 --- a/target/linux/mpc85xx/patches-6.1/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/common.c -+++ b/arch/powerpc/platforms/85xx/common.c -@@ -30,6 +30,7 @@ static const struct of_device_id mpc85xx - { .compatible = "fsl,mpc8548-guts", }, - /* Probably unnecessary? */ - { .compatible = "gpio-leds", }, -+ { .compatible = "gpio-keys", }, - /* For all PCI controllers */ - { .compatible = "fsl,mpc8540-pci", }, - { .compatible = "fsl,mpc8548-pcie", }, diff --git a/target/linux/mpc85xx/patches-6.1/010-powerpc-add-compressed-zImage-for-mpc85xx.patch b/target/linux/mpc85xx/patches-6.1/010-powerpc-add-compressed-zImage-for-mpc85xx.patch deleted file mode 100644 index 16ef37bd78..0000000000 --- a/target/linux/mpc85xx/patches-6.1/010-powerpc-add-compressed-zImage-for-mpc85xx.patch +++ /dev/null @@ -1,61 +0,0 @@ -From b30ba76a980b3a9282f309c23e3bb0b0eb2c72cd Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Thu, 30 May 2024 02:55:38 +0200 -Subject: [PATCH] powerpc: add compressed zImage for mpc85xx - -Add a universal zImage which can be loaded by mpc85xx boards at -load address 0x3000000. This allows boards to boot kernels larger than -16MB even if the image is loaded temporarily from NAND at offset -0x1000000 which some bootloaders do by default. - -Signed-off-by: David Bauer ---- - arch/powerpc/boot/Makefile | 1 + - arch/powerpc/boot/wrapper | 5 +++++ - 2 files changed, 6 insertions(+) - ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -175,6 +175,7 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot - src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c - src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c - src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c -+src-plat-$(CONFIG_PPC_ZIMAGE_LA3000000) += fixed-head.S - src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S - src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S - src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S -@@ -345,6 +346,7 @@ image-$(CONFIG_MPC836x_MDS) += cuImage. - image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot - - # Board ports in arch/powerpc/platform/85xx/Kconfig -+image-$(CONFIG_PPC_ZIMAGE_LA3000000) += zImage.la3000000 - image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads - image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads - image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ ---- a/arch/powerpc/boot/wrapper -+++ b/arch/powerpc/boot/wrapper -@@ -254,6 +254,11 @@ if [ -n "$esm_blob" -a "$platform" != "p - fi - - case "$platform" in -+la3000000) -+ binary=y -+ platformo="$object/fixed-head.o $object/of.o $object/epapr.o" -+ link_address='0x3000000' -+ ;; - of) - platformo="$object/of.o $object/epapr.o" - make_space=n ---- a/arch/powerpc/Kconfig -+++ b/arch/powerpc/Kconfig -@@ -74,6 +74,10 @@ config NMI_IPI - depends on SMP && (DEBUGGER || KEXEC_CORE || HARDLOCKUP_DETECTOR) - default y - -+config PPC_ZIMAGE_LA3000000 -+ bool -+ default n -+ - config PPC_WATCHDOG - bool - depends on HARDLOCKUP_DETECTOR diff --git a/target/linux/mpc85xx/patches-6.1/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-6.1/100-powerpc-85xx-tl-wdr4900-v1-support.patch deleted file mode 100644 index 5f8d84ccee..0000000000 --- a/target/linux/mpc85xx/patches-6.1/100-powerpc-85xx-tl-wdr4900-v1-support.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 20 Feb 2013 08:40:33 +0100 -Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1 - board - -This patch adds support for the TP-Link TL-WDR4900 v1 -concurrent dual-band wireless router. The devices uses -the Freescale P1014 SoC. - -Signed-off-by: Gabor Juhos -Signed-off-by: Pawel Dembicki ---- - arch/powerpc/boot/Makefile | 3 ++- - arch/powerpc/boot/wrapper | 5 +++++ - arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++ - arch/powerpc/platforms/85xx/Makefile | 1 + - 4 files changed, 20 insertions(+), 1 deletion(-) - ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -180,6 +180,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie - src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S - src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S - src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c -+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S - - src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c - -@@ -361,7 +362,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm - image-$(CONFIG_TQM8555) += cuImage.tqm8555 - image-$(CONFIG_TQM8560) += cuImage.tqm8560 - image-$(CONFIG_KSI8560) += cuImage.ksi8560 -- -+image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 - # Board ports in arch/powerpc/platform/86xx/Kconfig - image-$(CONFIG_MVME7100) += dtbImage.mvme7100 - ---- a/arch/powerpc/boot/wrapper -+++ b/arch/powerpc/boot/wrapper -@@ -346,6 +346,11 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" - binary=y - ;; -+simpleboot-tl-wdr4900-v1) -+ platformo="$object/fixed-head.o $object/simpleboot.o" -+ link_address='0x1500000' -+ binary=y -+ ;; - simpleboot-*) - platformo="$object/fixed-head.o $object/simpleboot.o" - binary=y ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -163,6 +163,18 @@ config STX_GP3 - select CPM2 - select DEFAULT_UIMAGE - -+config TL_WDR4900_V1 -+ bool "TP-Link TL-WDR4900 v1" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ select SWIOTLB -+ help -+ This option enables support for the TP-Link TL-WDR4900 v1 board. -+ -+ This board is a Concurrent Dual-Band wireless router with a -+ Freescale P1014 SoC. -+ - config TQM8540 - bool "TQ Components TQM8540" - help ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_TWR_P102x) += twr_p102x.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o - obj-$(CONFIG_STX_GP3) += stx_gp3.o -+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o - obj-$(CONFIG_TQM85xx) += tqm85xx.o - obj-$(CONFIG_PPA8548) += ppa8548.o - obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o diff --git a/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch deleted file mode 100644 index 18466216c0..0000000000 --- a/target/linux/mpc85xx/patches-6.1/101-powerpc-85xx-hiveap-330-support.patch +++ /dev/null @@ -1,58 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -40,6 +40,17 @@ config BSC9132_QDS - and dual StarCore SC3850 DSP cores. - Manufacturer : Freescale Semiconductor, Inc - -+config HIVEAP_330 -+ bool "Aerohive HiveAP-330" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the Aerohive HiveAP-330 board. -+ -+ This board is a Concurrent Dual-Band wireless access point with a -+ Freescale P1020 SoC. -+ - config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -12,6 +12,7 @@ obj-y += common.o - obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o - obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o - obj-$(CONFIG_C293_PCIE) += c293pcie.o -+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o - obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o - obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o - obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -180,6 +180,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie - src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S - src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S - src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c -+src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S - - src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c -@@ -362,6 +363,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm - image-$(CONFIG_TQM8555) += cuImage.tqm8555 - image-$(CONFIG_TQM8560) += cuImage.tqm8560 - image-$(CONFIG_KSI8560) += cuImage.ksi8560 -+image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 - image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 - # Board ports in arch/powerpc/platform/86xx/Kconfig - image-$(CONFIG_MVME7100) += dtbImage.mvme7100 ---- a/arch/powerpc/boot/wrapper -+++ b/arch/powerpc/boot/wrapper -@@ -346,6 +346,7 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" - binary=y - ;; -+simpleboot-hiveap-330|\ - simpleboot-tl-wdr4900-v1) - platformo="$object/fixed-head.o $object/simpleboot.o" - link_address='0x1500000' diff --git a/target/linux/mpc85xx/patches-6.1/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-6.1/102-powerpc-add-cmdline-override.patch deleted file mode 100644 index 2ac10eae8e..0000000000 --- a/target/linux/mpc85xx/patches-6.1/102-powerpc-add-cmdline-override.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/powerpc/Kconfig -+++ b/arch/powerpc/Kconfig -@@ -958,6 +958,14 @@ config CMDLINE_FORCE - - endchoice - -+config CMDLINE_OVERRIDE -+ bool "Use alternative cmdline from device tree" -+ help -+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can -+ be used, this is not a good option for kernels that are shared across -+ devices. This setting enables using "chosen/cmdline-override" as the -+ cmdline if it exists in the device tree. -+ - config EXTRA_TARGETS - string "Additional default image types" - help ---- a/drivers/of/fdt.c -+++ b/drivers/of/fdt.c -@@ -1187,6 +1187,17 @@ int __init early_init_dt_scan_chosen(cha - if (p != NULL && l > 0) - strlcat(cmdline, p, min_t(int, strlen(cmdline) + (int)l, COMMAND_LINE_SIZE)); - -+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different -+ * device tree option of chosen/bootargs-override. This is -+ * helpful on boards where u-boot sets bootargs, and is unable -+ * to be modified. -+ */ -+#ifdef CONFIG_CMDLINE_OVERRIDE -+ p = of_get_flat_dt_prop(node, "bootargs-override", &l); -+ if (p != NULL && l > 0) -+ strlcpy(cmdline, p, min((int)l, COMMAND_LINE_SIZE)); -+#endif -+ - handle_cmdline: - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else diff --git a/target/linux/mpc85xx/patches-6.1/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-6.1/103-powerpc-85xx-red-15w-rev1.patch deleted file mode 100644 index 711d98abe7..0000000000 --- a/target/linux/mpc85xx/patches-6.1/103-powerpc-85xx-red-15w-rev1.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -166,6 +166,16 @@ config XES_MPC85xx - Manufacturer: Extreme Engineering Solutions, Inc. - URL: - -+config RED_15W_REV1 -+ bool "Sophos RED 15w Rev.1" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the Sophos RED 15w Rev.1 board. -+ -+ This board is a wireless VPN router with a Freescale P1010 SoC. -+ - config STX_GP3 - bool "Silicon Turnkey Express GP3" - help ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o - obj-$(CONFIG_TWR_P102x) += twr_p102x.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o -+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o - obj-$(CONFIG_STX_GP3) += stx_gp3.o - obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o - obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/target/linux/mpc85xx/patches-6.1/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-6.1/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch deleted file mode 100644 index 94ed26c3df..0000000000 --- a/target/linux/mpc85xx/patches-6.1/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch +++ /dev/null @@ -1,170 +0,0 @@ -From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Sun, 30 Dec 2018 23:24:41 +0100 -Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT - -This patch apply chages for OpenWRT in P2020RDB -dts file. - -Signed-off-by: Pawel Dembicki ---- - arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++--------- - 1 file changed, 63 insertions(+), 35 deletions(-) - ---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts -+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts -@@ -5,10 +5,15 @@ - * Copyright 2009-2012 Freescale Semiconductor Inc. - */ - -+/dts-v1/; -+ - /include/ "p2020si-pre.dtsi" - -+#include -+#include -+ - / { -- model = "fsl,P2020RDB"; -+ model = "Freescale P2020RDB"; - compatible = "fsl,P2020RDB"; - - aliases { -@@ -34,48 +39,38 @@ - 0x2 0x0 0x0 0xffb00000 0x00020000>; - - nor@0,0 { -- #address-cells = <1>; -- #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x1000000>; - bank-width = <2>; - device-width = <1>; - -- partition@0 { -- /* This location must not be altered */ -- /* 256KB for Vitesse 7385 Switch firmware */ -- reg = <0x0 0x00040000>; -- label = "NOR (RO) Vitesse-7385 Firmware"; -- read-only; -- }; -- -- partition@40000 { -- /* 256KB for DTB Image */ -- reg = <0x00040000 0x00040000>; -- label = "NOR (RO) DTB Image"; -- read-only; -- }; -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; - -- partition@80000 { -- /* 3.5 MB for Linux Kernel Image */ -- reg = <0x00080000 0x00380000>; -- label = "NOR (RO) Linux Kernel Image"; -- read-only; -- }; -+ partition@0 { -+ /* This location must not be altered */ -+ /* 256KB for Vitesse 7385 Switch firmware */ -+ reg = <0x0 0x00040000>; -+ label = "NOR (RO) Vitesse-7385 Firmware"; -+ read-only; -+ }; - -- partition@400000 { -- /* 11MB for JFFS2 based Root file System */ -- reg = <0x00400000 0x00b00000>; -- label = "NOR (RW) JFFS2 Root File System"; -- }; -+ partition@40000 { -+ compatible = "denx,fit"; -+ reg = <0x00040000 0x00ec0000>; -+ label = "firmware"; -+ }; - -- partition@f00000 { -- /* This location must not be altered */ -- /* 512KB for u-boot Bootloader Image */ -- /* 512KB for u-boot Environment Variables */ -- reg = <0x00f00000 0x00100000>; -- label = "NOR (RO) U-Boot Image"; -- read-only; -+ partition@f00000 { -+ /* This location must not be altered */ -+ /* 512KB for u-boot Bootloader Image */ -+ /* 512KB for u-boot Environment Variables */ -+ reg = <0x00f00000 0x00100000>; -+ label = "u-boot"; -+ read-only; -+ }; - }; - }; - -@@ -85,6 +80,7 @@ - compatible = "fsl,p2020-fcm-nand", - "fsl,elbc-fcm-nand"; - reg = <0x1 0x0 0x40000>; -+ nand-ecc-mode = "none"; - - partition@0 { - /* This location must not be altered */ -@@ -140,13 +136,43 @@ - soc: soc@ffe00000 { - ranges = <0x0 0x0 0xffe00000 0x100000>; - -+ gpio0: gpio-controller@fc00 { -+ }; -+ - i2c@3000 { -+ temperature-sensor@4c { -+ compatible = "adi,adt7461"; -+ reg = <0x4c>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c256"; -+ reg = <0x50>; -+ }; -+ - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - -+ i2c@3100 { -+ pmic@11 { -+ compatible = "zl2006"; -+ reg = <0x11>; -+ }; -+ -+ gpio@18 { -+ compatible = "nxp,pca9557"; -+ reg = <0x18>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c01"; -+ reg = <0x52>; -+ }; -+ }; -+ - spi@7000 { - flash@0 { - #address-cells = <1>; -@@ -200,10 +226,12 @@ - phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; - reg = <0x0>; -+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - phy1: ethernet-phy@1 { - interrupts = <3 1 0 0>; - reg = <0x1>; -+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - }; - tbi-phy@2 { - device_type = "tbi-phy"; diff --git a/target/linux/mpc85xx/patches-6.1/105-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-6.1/105-powerpc-85xx-panda-support.patch deleted file mode 100644 index 3c24a373ab..0000000000 --- a/target/linux/mpc85xx/patches-6.1/105-powerpc-85xx-panda-support.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -51,6 +51,17 @@ config HIVEAP_330 - This board is a Concurrent Dual-Band wireless access point with a - Freescale P1020 SoC. - -+config PANDA -+ bool "OCEDO PANDA" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the OCEDO PANDA board. -+ -+ This board is a Concurrent Dual-Band wireless access point with a -+ Freescale P1020 SoC. -+ - config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o - obj-$(CONFIG_P1022_DS) += p1022_ds.o - obj-$(CONFIG_P1022_RDK) += p1022_rdk.o - obj-$(CONFIG_P1023_RDB) += p1023_rdb.o -+obj-$(CONFIG_PANDA) += panda.o - obj-$(CONFIG_TWR_P102x) += twr_p102x.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o diff --git a/target/linux/mpc85xx/patches-6.1/106-powerpc-85xx-ws-ap3710i-support.patch b/target/linux/mpc85xx/patches-6.1/106-powerpc-85xx-ws-ap3710i-support.patch deleted file mode 100644 index 742fe7c2c0..0000000000 --- a/target/linux/mpc85xx/patches-6.1/106-powerpc-85xx-ws-ap3710i-support.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -62,6 +62,17 @@ config PANDA - This board is a Concurrent Dual-Band wireless access point with a - Freescale P1020 SoC. - -+config WS_AP3710I -+ bool "Enterasys WS-AP3710i" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the Enterasys WS-AP3710i board. -+ -+ This board is a Concurrent Dual-Band wireless access point with a -+ Freescale P1020 SoC. -+ - config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o - obj-$(CONFIG_P1023_RDB) += p1023_rdb.o - obj-$(CONFIG_PANDA) += panda.o - obj-$(CONFIG_TWR_P102x) += twr_p102x.o -+obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o - obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -182,6 +182,7 @@ src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += - src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c - src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S -+src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S - - src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c - -@@ -365,6 +366,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm - image-$(CONFIG_KSI8560) += cuImage.ksi8560 - image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 - image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 -+image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i - # Board ports in arch/powerpc/platform/86xx/Kconfig - image-$(CONFIG_MVME7100) += dtbImage.mvme7100 - ---- a/arch/powerpc/boot/wrapper -+++ b/arch/powerpc/boot/wrapper -@@ -347,7 +347,8 @@ adder875-redboot) - binary=y - ;; - simpleboot-hiveap-330|\ --simpleboot-tl-wdr4900-v1) -+simpleboot-tl-wdr4900-v1|\ -+simpleboot-ws-ap3710i) - platformo="$object/fixed-head.o $object/simpleboot.o" - link_address='0x1500000' - binary=y diff --git a/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch b/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch deleted file mode 100644 index 346001271b..0000000000 --- a/target/linux/mpc85xx/patches-6.1/107-powerpc-85xx-add-ws-ap3825i-support.patch +++ /dev/null @@ -1,67 +0,0 @@ -From 2fa1a7983ef30f3c7486f9b07c001bee87d1f6d6 Mon Sep 17 00:00:00 2001 -From: Martin Kennedy -Date: Sat, 1 Jan 2022 11:01:37 -0500 -Subject: [PATCH] PowerPC 85xx: Add WS-AP3825i support - -This patch adds support for building Linux for the Extreme Networks -WS-AP3825i AP. - ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -73,6 +73,16 @@ config WS_AP3710I - This board is a Concurrent Dual-Band wireless access point with a - Freescale P1020 SoC. - -+config WS_AP3825I -+ bool "Extreme Networks WS-AP3825i" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the Extreme Networks WS-AP3825i board. -+ This board is a Concurrent Dual-Band wireless access point with a -+ Freescale P1020 SoC. -+ - config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o - obj-$(CONFIG_PANDA) += panda.o - obj-$(CONFIG_TWR_P102x) += twr_p102x.o - obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o -+obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o - obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -183,6 +183,7 @@ src-plat-$(CONFIG_MVME7100) += motload-h - src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S -+src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S - - src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c - -@@ -367,6 +368,7 @@ image-$(CONFIG_KSI8560) += cuImage.ksi - image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 - image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 - image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i -+image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i - # Board ports in arch/powerpc/platform/86xx/Kconfig - image-$(CONFIG_MVME7100) += dtbImage.mvme7100 - ---- a/arch/powerpc/boot/wrapper -+++ b/arch/powerpc/boot/wrapper -@@ -348,7 +348,8 @@ adder875-redboot) - ;; - simpleboot-hiveap-330|\ - simpleboot-tl-wdr4900-v1|\ --simpleboot-ws-ap3710i) -+simpleboot-ws-ap3710i|\ -+simpleboot-ws-ap3825i) - platformo="$object/fixed-head.o $object/simpleboot.o" - link_address='0x1500000' - binary=y diff --git a/target/linux/mpc85xx/patches-6.1/108-powerpc-85xx-firebox-t10-support.patch.patch b/target/linux/mpc85xx/patches-6.1/108-powerpc-85xx-firebox-t10-support.patch.patch deleted file mode 100644 index 0b3a93b848..0000000000 --- a/target/linux/mpc85xx/patches-6.1/108-powerpc-85xx-firebox-t10-support.patch.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -83,6 +83,16 @@ config WS_AP3825I - This board is a Concurrent Dual-Band wireless access point with a - Freescale P1020 SoC. - -+config FIREBOX_T10 -+ bool "Watchguard Firebox T10" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the Watchguard Firebox T10 board. -+ This board is a VPN Gateway-Router with a -+ Freescale P1010 SoC. -+ - config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -28,6 +28,7 @@ obj-$(CONFIG_PANDA) += panda.o - obj-$(CONFIG_TWR_P102x) += twr_p102x.o - obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o - obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o -+obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o - obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o diff --git a/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch b/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch deleted file mode 100644 index a9f7079866..0000000000 --- a/target/linux/mpc85xx/patches-6.1/109-powerpc-85xx-add-ws-ap3715i-support.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -73,6 +73,17 @@ config WS_AP3710I - This board is a Concurrent Dual-Band wireless access point with a - Freescale P1020 SoC. - -+config WS_AP3715I -+ bool "Enterasys WS-AP3715i" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the Enterasys WS-AP3715i board. -+ -+ This board is a Concurrent Dual-Band wireless access point with a -+ Freescale P1010 SoC. -+ - config WS_AP3825I - bool "Extreme Networks WS-AP3825i" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o - obj-$(CONFIG_PANDA) += panda.o - obj-$(CONFIG_TWR_P102x) += twr_p102x.o - obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o -+obj-$(CONFIG_WS_AP3715I) += ws-ap3715i.o - obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o - obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -183,6 +183,7 @@ src-plat-$(CONFIG_MVME7100) += motload-h - src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S -+src-plat-$(CONFIG_WS_AP3715I) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_WS_AP3825I) += simpleboot.c fixed-head.S - - src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c -@@ -368,6 +369,7 @@ image-$(CONFIG_KSI8560) += cuImage.ksi - image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 - image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 - image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i -+image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i - image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i - # Board ports in arch/powerpc/platform/86xx/Kconfig - image-$(CONFIG_MVME7100) += dtbImage.mvme7100 diff --git a/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch b/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch deleted file mode 100644 index a58d12aef2..0000000000 --- a/target/linux/mpc85xx/patches-6.1/110-powerpc-85xx-br200-wp-support.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -40,6 +40,16 @@ config BSC9132_QDS - and dual StarCore SC3850 DSP cores. - Manufacturer : Freescale Semiconductor, Inc - -+config BR200_WP -+ bool "Aerohive BR200-WP" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the Aerohive BR200-WP board. -+ -+ This board is a wireless router with a Freescale P1011 SoC. -+ - config HIVEAP_330 - bool "Aerohive HiveAP-330" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -12,6 +12,7 @@ obj-y += common.o - obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o - obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o - obj-$(CONFIG_C293_PCIE) += c293pcie.o -+obj-$(CONFIG_BR200_WP) += br200-wp.o - obj-$(CONFIG_HIVEAP_330) += hiveap-330.o - obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o - obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -180,6 +180,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie - src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S - src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S - src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c -+src-plat-$(CONFIG_BR200_WP) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_HIVEAP_330) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S - src-plat-$(CONFIG_WS_AP3710I) += simpleboot.c fixed-head.S -@@ -366,6 +367,7 @@ image-$(CONFIG_TQM8548) += cuImage.tqm - image-$(CONFIG_TQM8555) += cuImage.tqm8555 - image-$(CONFIG_TQM8560) += cuImage.tqm8560 - image-$(CONFIG_KSI8560) += cuImage.ksi8560 -+image-$(CONFIG_BR200_WP) += simpleImage.br200-wp - image-$(CONFIG_HIVEAP_330) += simpleImage.hiveap-330 - image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 - image-$(CONFIG_WS_AP3710I) += simpleImage.ws-ap3710i ---- a/arch/powerpc/boot/wrapper -+++ b/arch/powerpc/boot/wrapper -@@ -346,6 +346,7 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" - binary=y - ;; -+simpleboot-br200-wp|\ - simpleboot-hiveap-330|\ - simpleboot-tl-wdr4900-v1|\ - simpleboot-ws-ap3710i|\ diff --git a/target/linux/mpc85xx/patches-6.1/111-powerpc-85xx-hpe-msm-support.patch b/target/linux/mpc85xx/patches-6.1/111-powerpc-85xx-hpe-msm-support.patch deleted file mode 100644 index 4b9c6f8219..0000000000 --- a/target/linux/mpc85xx/patches-6.1/111-powerpc-85xx-hpe-msm-support.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -114,6 +114,18 @@ config FIREBOX_T10 - This board is a VPN Gateway-Router with a - Freescale P1010 SoC. - -+config MSM460 -+ bool "HPE MSM460" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ select PPC_ZIMAGE_LA3000000 -+ help -+ This option enables support for the HPE MSM460 board. -+ -+ This board is a Concurrent Dual-Band wireless access point with a -+ Freescale P1020 SoC. -+ - config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds. - obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o - obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o - obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o -+obj-$(CONFIG_MSM460) += msm460.o - obj-$(CONFIG_P1010_RDB) += p1010rdb.o - obj-$(CONFIG_P1022_DS) += p1022_ds.o - obj-$(CONFIG_P1022_RDK) += p1022_rdk.o diff --git a/target/linux/mpc85xx/patches-6.1/150-arch-powerpc-simpleboot-prevent-overwrite-of-CPU1-sp.patch b/target/linux/mpc85xx/patches-6.1/150-arch-powerpc-simpleboot-prevent-overwrite-of-CPU1-sp.patch deleted file mode 100644 index 1ff80a5016..0000000000 --- a/target/linux/mpc85xx/patches-6.1/150-arch-powerpc-simpleboot-prevent-overwrite-of-CPU1-sp.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 5f856ccc34df25060d36a5a81b7b45b574d86e35 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Sun, 3 Dec 2023 20:09:24 +0100 -Subject: [PATCH] arch: powerpc: simpleboot: prevent overwrite of CPU1 - spin-table - -Don't overwrite the spin-table of additional CPU cores with loader-heap. - -U-Boot places the spin-table for CPU1 on P1020 SoCs in the top 1MB of -system-memory. Instead of parsing reserved-memory (which would be -considerable more work), reduce the available system-memory for the -loader by 1MB. - -This prevents the loader from overwriting the spin-table of -additional CPU cores on these platforms. - -Linux itself needs to be made aware by this using reserved-memory -definitions. - -This patch is required for using CPU1 on the Extreme Networks -WS-AP3825i. - -Signed-off-by: David Bauer ---- - arch/powerpc/boot/simpleboot.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/powerpc/boot/simpleboot.c -+++ b/arch/powerpc/boot/simpleboot.c -@@ -65,6 +65,11 @@ void platform_init(unsigned long r3, uns - if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL) - memsize64 = 0xffffffff; - -+ /* Reserve upper 1 MB of memory for CPU1 spin-table */ -+ if (memsize64 > 0x100000) { -+ memsize64 = memsize64 - 0x100000; -+ } -+ - /* finally, setup the timebase */ - node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type", - "cpu", sizeof("cpu")); diff --git a/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch b/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch deleted file mode 100644 index a997a1b9b7..0000000000 --- a/target/linux/mpc85xx/patches-6.1/900-powerpc-bootwrapper-disable-uImage-generation.patch +++ /dev/null @@ -1,42 +0,0 @@ -From d43ab14605510d9d2bd257a8cd70f24ada4621b0 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Sat, 29 Feb 2020 14:27:04 +0100 -Subject: [PATCH] powerpc: bootwrapper: disable uImage generation - -Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to -instruct the mkimage to use the xz compression, which isn't -supported. This disables the uImage generation, as OpenWrt -generates individual uImages for each board using it's own -toolchain. - -Signed-off-by: David Bauer ---- - arch/powerpc/boot/Makefile | 9 --------- - 1 file changed, 9 deletions(-) - ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -294,7 +294,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp - image-$(CONFIG_PPC_EFIKA) += zImage.chrp - image-$(CONFIG_PPC_PMAC) += zImage.pmac - image-$(CONFIG_PPC_HOLLY) += dtbImage.holly --image-$(CONFIG_DEFAULT_UIMAGE) += uImage - image-$(CONFIG_EPAPR_BOOT) += zImage.epapr - - # -@@ -432,15 +431,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits - $(obj)/vmlinux.strip: vmlinux - $(STRIP) -s -R .comment $< -o $@ - --$(obj)/uImage: vmlinux $(wrapperbits) FORCE -- $(call if_changed,wrap,uboot) -- --$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE -- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) -- --$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE -- $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) -- - $(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE - $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) -