From: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Date: Sun, 8 Dec 2019 12:42:39 +0000 (+0100)
Subject: ramips: mt7621: use flash location for wan_mac in 02_network
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ed975a58e43db95748e3a23039d84a50f79712e0;p=openwrt%2Fstaging%2Fxback.git

ramips: mt7621: use flash location for wan_mac in 02_network

This uses the flash locations instead of eth0 MAC address to
calculate MAC address increments for WAN.

The change will make the MAC address setup of a particular device
more obvious and removes the dependency of 02_network on the eth0
initialization.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
---

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index e7e225a148..2828cf67dc 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -147,30 +147,21 @@ ramips_setup_macs()
 	local label_mac=""
 
 	case $board in
-	adslr,g7|\
+	adslr,g7)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0xe00c)" 1)
+		;;
 	afoundry,ew1200|\
 	asiarf,ap7621-001|\
 	asiarf,ap7621-nv1|\
 	firefly,firewrt|\
 	gehua,ghl-r-001|\
-	mediatek,ap-mt7621a-v60|\
-	mikrotik,rb750gr3|\
-	mikrotik,rbm33g|\
 	mqmaker,witi|\
-	mtc,wr1201|\
-	netgear,r6220|\
-	netgear,wndr3700-v5|\
-	storylink,sap-g3200u3|\
-	telco-electronics,x1|\
 	totolink,a7000r|\
-	ubiquiti,edgerouterx|\
-	ubiquiti,edgerouterx-sfp|\
 	unielec,u7621-06-16m|\
 	unielec,u7621-06-64m|\
-	xiaoyu,xy-c5|\
 	xzwifi,creativebox-v1|\
 	zbtlink,zbt-wg2626)
-		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0xe000)" 1)
 		;;
 	alfa-network,quad-e4g|\
 	asus,rt-ac57u|\
@@ -215,17 +206,36 @@ ramips_setup_macs()
 		wan_mac=$(macaddr_add "$lan_mac" 1)
 		;;
 	iodata,wn-ax1167gr|\
-	iodata,wn-gx300gr)
+	iodata,wn-gx300gr|\
+	mtc,wr1201|\
+	netgear,r6220|\
+	netgear,wndr3700-v5|\
+	xiaoyu,xy-c5)
 		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
 		;;
 	iodata,wnpr2600g)
 		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
 		label_mac=$wan_mac
 		;;
+	mediatek,ap-mt7621a-v60)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x5)" 1)
+		;;
+	mikrotik,rb750gr3|\
+	mikrotik,rbm33g)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary hard_config 0x10)" 2)
+		;;
 	netgear,r6260|\
 	netgear,r6350|\
 	netgear,r6850)
-		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 2)
+		;;
+	storylink,sap-g3200u3|\
+	telco-electronics,x1)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0xe006)" 1)
+		;;
+	ubiquiti,edgerouterx|\
+	ubiquiti,edgerouterx-sfp)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x22)" 1)
 		;;
 	wevo,11acnas|\
 	wevo,w2914ns-v2)
@@ -249,7 +259,7 @@ ramips_setup_macs()
 		;;
 	zbtlink,zbt-wg3526-16m|\
 	zbtlink,zbt-wg3526-32m)
-		wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
+		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0xe000)" 1)
 		label_mac=$(mtd_get_mac_binary factory 0x4)
 		;;
 	esac