From: John Crispin <john@openwrt.org>
Date: Thu, 11 Dec 2014 18:28:44 +0000 (+0000)
Subject: au1000: distinguish different models and set correct MAC-address
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ed61e202a1d7185374a33ebe86a3d8c1640e47b3;p=openwrt%2Fstaging%2Frobimarko.git

au1000: distinguish different models and set correct MAC-address

The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43626
---

diff --git a/target/linux/au1000/base-files/etc/uci-defaults/02_network b/target/linux/au1000/base-files/etc/uci-defaults/02_network
new file mode 100755
index 0000000000..80bfb732d2
--- /dev/null
+++ b/target/linux/au1000/base-files/etc/uci-defaults/02_network
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+. /lib/au1000.sh
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+MAC=
+
+case "$(au1000_board_name)" in
+	'internetbox')
+		MAC="$( au1000_yamonenv_getvar 'ethaddr' )"
+		MAC="$( macaddr_canonicalize "$MAC" )"
+
+		[ -n "$MAC ] && ucidef_set_interface_macaddr lan "$MAC"
+	;;
+esac
+
+[ -z "$MAC" ] || uci commit network
diff --git a/target/linux/au1000/base-files/lib/au1000.sh b/target/linux/au1000/base-files/lib/au1000.sh
new file mode 100644
index 0000000000..556598dbc1
--- /dev/null
+++ b/target/linux/au1000/base-files/lib/au1000.sh
@@ -0,0 +1,59 @@
+#!/bin/sh
+
+au1000_yamonenv_getvar()
+{
+	local varname="$1"
+	local partition
+
+	. /lib/functions.sh
+
+	partition="$( find_mtd_part 'yamon env' )"
+	YAMONENVFILE="$partition" yamonenv "$varname"
+}
+
+au1000_detect()
+{
+	local line board_name model
+
+	while read line; do
+		case "$line" in
+			'system type'*)
+				break
+			;;
+		esac
+	done <'/proc/cpuinfo'
+
+	case "$line" in
+		*' MTX-1')
+			# both models appear nearly similar: the 'InternetBox' has
+			# the same design but shrinked to 1 PCB and only 1 x miniPCI
+			# for WiFi/ath5k and 1 x miniPCI for CardBus/UMTS, they differ
+			# in BogoMIPS but there are old MeshCubes with 330 Mhz instead
+			# of 400 MHz and no Cube has 'imei' (for UMTS) set in bootloader-env
+
+			if [ -n "$( au1000_yamonenv_getvar 'imei' )" ]; then
+				board_name='internetbox'
+				model='T-Mobile InternetBox TMD SB1-S'
+			else
+				board_name='meshcube'
+				model='4G Systems AccessCube/MeshCube'
+			fi
+		;;
+		*)
+			board_name='unknown'
+			model='unknown'
+		;;
+	esac
+
+	mkdir -p '/tmp/sysinfo'
+	echo "$board_name" >'/tmp/sysinfo/board_name'
+	echo "$model" >'/tmp/sysinfo/model'
+}
+
+au1000_board_name()
+{
+	local file='/tmp/sysinfo/board_name'
+
+	[ -e "$file" ] || au1000_detect
+	cat "$file"
+}