From: Birger Koblitz Date: Mon, 7 Mar 2022 18:50:29 +0000 (+0100) Subject: ramips: add support for Renkforce WS-WN530HP3-A X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ed364cd4b03b289a7bb4b32c350c46eddeb6b6b9;p=openwrt%2Fstaging%2Fblogic.git ramips: add support for Renkforce WS-WN530HP3-A This adds support for the Renkforce WS-WN530HP3-A ceiling- mountable Wireless Access Point, which is powered over PoE. Hardware: - SoC: Mediatek MT7621DAT - RAM: 128MiB on SoC - Flash: 16MiB GigaDevice GD25Q128C - 2.4Ghz Wifi: Mediatek MT603EN - 5GHz Wifi: MT613BEN - Ethernet: - 1x 1GBit WAN port, passive PoE capable - 2x 1GBit LAN ports LEDs: 1x Bi-Color LED (red/blue) Buttons: 1x Reset Button, 1x Power Button Installation: Power on the access point and immedately press the reset button for 10 seconds. Connect web-browser to 192.168.10.1 and upload sysupgrade image. Flash uploaded image and wait about 2 minutes for reboot. Signed-off-by: Birger Koblitz Signed-off-by: Petr Štetiar [fixed SoB] --- diff --git a/target/linux/ramips/dts/mt7621_renkforce_ws-wn530hp3-a.dts b/target/linux/ramips/dts/mt7621_renkforce_ws-wn530hp3-a.dts new file mode 100644 index 000000000000..13e37d7124eb --- /dev/null +++ b/target/linux/ramips/dts/mt7621_renkforce_ws-wn530hp3-a.dts @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "renkforce,ws-wn530hp3-a", "mediatek,mt7621-soc"; + model = "Renkforce WS-WN530HP3-A"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led_1 { + label = "red:led1"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + led_2 { + label = "blue:led2"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf30000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi0: wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + }; +}; + +&pcie1 { + wifi1: wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(-2)>; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan2"; + }; + + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@4 { + status = "okay"; + label = "wan"; + nvmem-cells = <&macaddr_factory_4>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <(-1)>; + }; + }; +}; + +&state_default { + gpio { + groups = "uart2", "jtag", "wdt"; + function = "gpio"; + }; +}; + +&xhci { + status = "disabled"; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 1b7d095fc487..011a96a59e5e 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1359,6 +1359,17 @@ define Device/raisecom_msg1500-x-00 endef TARGET_DEVICES += raisecom_msg1500-x-00 +define Device/renkforce_ws-wn530hp3-a + $(Device/dsa-migration) + DEVICE_VENDOR := Renkforce + DEVICE_MODEL := WS-WN530HP3-A + DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap + IMAGE/sysupgrade.bin := append-kernel | pad-to 65536 | append-rootfs | \ + check-size | append-metadata + IMAGE_SIZE := 15040k +endef +TARGET_DEVICES += renkforce_ws-wn530hp3-a + define Device/samknows_whitebox-v8 $(Device/dsa-migration) IMAGE_SIZE := 16064k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 3e934899bb4f..bd51f3638e9e 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -43,6 +43,7 @@ ramips_setup_interfaces() jcg,q20|\ lenovo,newifi-d1|\ mikrotik,routerboard-m33g|\ + renkforce,ws-wn530hp3-a|\ xiaomi,mi-router-3g|\ xiaomi,mi-router-3g-v2|\ xiaomi,mi-router-4|\