From: Gabor Juhos <juhosg@openwrt.org>
Date: Sun, 4 Nov 2012 22:08:54 +0000 (+0000)
Subject: ar71xx: don't use the unknown LED on the ZCN-1523-5 board
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ed35253f4c612499f6966dcd408a7583f1663a04;p=openwrt%2Fstaging%2Fansuel.git

ar71xx: don't use the unknown LED on the ZCN-1523-5 board

According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34076
---

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
index 3a6fe21ed2..bc79ab9953 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
@@ -27,7 +27,7 @@
 #define ZCN_1523H_2_GPIO_LED_MEDIUM	14
 #define ZCN_1523H_2_GPIO_LED_STRONG	15
 
-#define ZCN_1523H_5_GPIO_LED_UNKNOWN	1
+#define ZCN_1523H_5_GPIO_LAN2_POWER	1
 #define ZCN_1523H_5_GPIO_LED_LAN2	13
 #define ZCN_1523H_5_GPIO_LED_WEAK	14
 #define ZCN_1523H_5_GPIO_LED_MEDIUM	15
@@ -92,9 +92,6 @@ static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
 		.name		= "zcn-1523h:green:lan2",
 		.gpio		= ZCN_1523H_5_GPIO_LED_LAN2,
 		.active_low	= 1,
-	}, {
-		.name		= "zcn-1523h:amber:unknown",
-		.gpio		= ZCN_1523H_5_GPIO_LED_UNKNOWN,
 	}
 };