From: Gabor Juhos Date: Wed, 26 Dec 2012 09:50:34 +0000 (+0000) Subject: ar71xx: add kernel support for the AP136-020 board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ed1889db334bd8c53baf894182ea4109a28c320c;p=openwrt%2Fstaging%2Fwigyori.git ar71xx: add kernel support for the AP136-020 board Signed-off-by: Gabor Juhos SVN-Revision: 34884 --- diff --git a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch index d2852fb7cb..c8d6106000 100644 --- a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch +++ b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch @@ -56,7 +56,7 @@ static struct gpio_led ap136_leds_gpio[] __initdata = { { -@@ -98,64 +104,105 @@ static struct gpio_keys_button ap136_gpi +@@ -98,64 +104,136 @@ static struct gpio_keys_button ap136_gpi }, }; @@ -138,7 +138,8 @@ -static inline void ap136_pci_init(void) {} -#endif /* CONFIG_PCI */ - static void __init ap136_setup(void) +-static void __init ap136_setup(void) ++static void __init ap136_common_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); @@ -167,45 +168,78 @@ + mdiobus_register_board_info(ap136_mdio0_info, + ARRAY_SIZE(ap136_mdio0_info)); + ++ /* GMAC0 is connected to the RMGII interface */ ++ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ++ ath79_eth0_data.phy_mask = BIT(0); ++ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; ++ ++ ath79_register_eth(0); ++ ++ /* GMAC1 is connected tot eh SGMII interface */ ++ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; ++ ath79_eth1_data.speed = SPEED_1000; ++ ath79_eth1_data.duplex = DUPLEX_FULL; ++ ++ ath79_register_eth(1); ++} ++ ++static void __init ap136_010_setup(void) ++{ ++ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */ + ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; + ap136_ar8327_pad0_cfg.txclk_delay_en = true; + ap136_ar8327_pad0_cfg.rxclk_delay_en = true; + ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; + ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; + ++ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */ + ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; + ap136_ar8327_pad6_cfg.rxclk_delay_en = true; + ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; + -+ /* GMAC0 is connected to GMAC0 of the AR8327 switch via RGMII */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0xa6000000; ++ ath79_eth1_pll_data.pll_1000 = 0x03000101; + -+ ath79_register_eth(0); ++ ap136_common_setup(); ++} + -+ /* GMAC1 is connected to GMAC6 of the AR8327 switch via SGMII */ -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; -+ ath79_eth1_data.speed = SPEED_1000; -+ ath79_eth1_data.duplex = DUPLEX_FULL; ++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", ++ "Atheros AP136-010 reference board", ++ ap136_010_setup); ++ ++static void __init ap136_020_setup(void) ++{ ++ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */ ++ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII; ++ ap136_ar8327_pad0_cfg.sgmii_delay_en = true; ++ ++ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */ ++ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII; ++ ap136_ar8327_pad6_cfg.txclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.rxclk_delay_en = true; ++ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; ++ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; ++ ++ ath79_eth0_pll_data.pll_1000 = 0x56000000; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + -+ ath79_register_eth(1); ++ ap136_common_setup(); } -MIPS_MACHINE(ATH79_MACH_AP136, "AP136", "Atheros AP136 reference board", -+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", -+ "Atheros AP136-010 reference board", - ap136_setup); +- ap136_setup); ++MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020", ++ "Atheros AP136-020 reference board", ++ ap136_020_setup); --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -18,7 +18,7 @@ enum ath79_mach_type { +@@ -18,7 +18,8 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, ATH79_MACH_AP121, /* Atheros AP121 reference board */ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ - ATH79_MACH_AP136, /* Atheros AP136 reference board */ + ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ ++ ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ ATH79_MACH_AP81, /* Atheros AP81 reference board */ ATH79_MACH_DB120, /* Atheros DB120 reference board */ ATH79_MACH_PB44, /* Atheros PB44 reference board */ diff --git a/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch index 21cfc76550..6eb4e5ab37 100644 --- a/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.6/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,20 +16,110 @@ +@@ -16,21 +16,111 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -13,6 +13,7 @@ ATH79_MACH_AP121, /* Atheros AP121 reference board */ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */ ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ + ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */ ATH79_MACH_AP81, /* Atheros AP81 reference board */ + ATH79_MACH_AP83, /* Atheros AP83 */ + ATH79_MACH_AP96, /* Atheros AP96 */