From: John Crispin <john@openwrt.org>
Date: Mon, 6 Oct 2014 20:08:40 +0000 (+0000)
Subject: at91: remove support for TQMa9263
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ec69988d09e057d4570abcebe27a5089d0eb1afc;p=openwrt%2Fstaging%2Fthess.git

at91: remove support for TQMa9263

This board is EOL, we should not bother anymore with it.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42825
---

diff --git a/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c b/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c
deleted file mode 100644
index cae1fe9359..0000000000
--- a/target/linux/at91/files-3.10/arch/arm/mach-at91/board-tqma9263.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- *  Copyright (C) 2008 I2SE GmbH
- *  Copyright (C) 2010 IEQualize GmbH
- *  Copyright (C) 2010-2011 Michael Heimpold
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include <video/atmel_lcdc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-#include <linux/atmel_serial.h>
-
-
-static void __init tqma9263_map_io(void)
-{
-	unsigned pins;
-
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 */
-	pins = ATMEL_UART_CTS | ATMEL_UART_RTS |
-	       ATMEL_UART_DSR | ATMEL_UART_DTR |
-	       ATMEL_UART_DCD | ATMEL_UART_RI;
-	at91_register_uart(AT91SAM9263_ID_US0, 1, pins);
-
-	/* USART1 on ttyS2 */
-	pins = ATMEL_UART_RTS;
-	at91_register_uart(AT91SAM9263_ID_US1, 2, pins);
-
-	/* USART2 on ttyS3 */
-	pins = ATMEL_UART_RTS;
-	at91_register_uart(AT91SAM9263_ID_US2, 3, pins);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata tqma9263_usbh_data = {
-	.ports			= 2,
-	.vbus_pin		= { AT91_PIN_PA24, AT91_PIN_PA21 },
-	.vbus_pin_active_low	= 0,
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata tqma9263_udc_data = {
-	.vbus_pin	= AT91_PIN_PA25,
-	.pullup_pin	= 0,			/* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata tqma9263_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PB28,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata tqma9263_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-
-/*
- * I2C devices
- */
-static struct i2c_board_info __initdata tqma9263_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-	{
-		I2C_BOARD_INFO("24c04", 0x52),
-	},
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata tqma9263_nand_partition[] = {
-	{
-		.name	= "uboot",
-		.offset	= 0,
-		.size	= 3 * SZ_128K,
-	},
-	{
-		.name	= "uboot-env",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_128K,
-	},
-	{
-		.name	= "linux",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_2M,
-	},
-	{
-		.name	= "rootfs",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(tqma9263_nand_partition);
-	return tqma9263_nand_partition;
-}
-
-static struct atmel_nand_data __initdata tqma9263_nand_data = {
-	.ale			= 21,
-	.cle			= 22,
-	.rdy_pin		= AT91_PIN_PD14,
-	.enable_pin		= AT91_PIN_PD15,
-};
-
-static struct sam9_smc_config __initdata tqma9263_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init tqma9263_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &tqma9263_nand_smc_config);
-
-	at91_add_device_nand(&tqma9263_nand_data);
-}
-
-
-static void __init tqma9263_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&tqma9263_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&tqma9263_udc_data);
-	/* MMC */
-	at91_add_device_mmc(1, &tqma9263_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(tqma9263_i2c_devices, ARRAY_SIZE(tqma9263_i2c_devices));
-	/* Ethernet */
-	at91_add_device_eth(&tqma9263_macb_data);
-	/* NAND flash */
-	tqma9263_add_device_nand();
-}
-
-MACHINE_START(TQMA9263, "TQ Components TQMa9263")
-	/* Maintainer: Michael Heimpold */
-	.timer		= &at91sam926x_timer,
-	.map_io		= tqma9263_map_io,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= tqma9263_board_init,
-MACHINE_END
diff --git a/target/linux/at91/files-3.14/arch/arm/mach-at91/board-tqma9263.c b/target/linux/at91/files-3.14/arch/arm/mach-at91/board-tqma9263.c
deleted file mode 100644
index cae1fe9359..0000000000
--- a/target/linux/at91/files-3.14/arch/arm/mach-at91/board-tqma9263.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- *  Copyright (C) 2008 I2SE GmbH
- *  Copyright (C) 2010 IEQualize GmbH
- *  Copyright (C) 2010-2011 Michael Heimpold
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include <video/atmel_lcdc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-#include <linux/atmel_serial.h>
-
-
-static void __init tqma9263_map_io(void)
-{
-	unsigned pins;
-
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1 */
-	pins = ATMEL_UART_CTS | ATMEL_UART_RTS |
-	       ATMEL_UART_DSR | ATMEL_UART_DTR |
-	       ATMEL_UART_DCD | ATMEL_UART_RI;
-	at91_register_uart(AT91SAM9263_ID_US0, 1, pins);
-
-	/* USART1 on ttyS2 */
-	pins = ATMEL_UART_RTS;
-	at91_register_uart(AT91SAM9263_ID_US1, 2, pins);
-
-	/* USART2 on ttyS3 */
-	pins = ATMEL_UART_RTS;
-	at91_register_uart(AT91SAM9263_ID_US2, 3, pins);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata tqma9263_usbh_data = {
-	.ports			= 2,
-	.vbus_pin		= { AT91_PIN_PA24, AT91_PIN_PA21 },
-	.vbus_pin_active_low	= 0,
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata tqma9263_udc_data = {
-	.vbus_pin	= AT91_PIN_PA25,
-	.pullup_pin	= 0,			/* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata tqma9263_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= AT91_PIN_PE18,
-	.wp_pin		= AT91_PIN_PB28,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata tqma9263_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-
-/*
- * I2C devices
- */
-static struct i2c_board_info __initdata tqma9263_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-	{
-		I2C_BOARD_INFO("24c04", 0x52),
-	},
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata tqma9263_nand_partition[] = {
-	{
-		.name	= "uboot",
-		.offset	= 0,
-		.size	= 3 * SZ_128K,
-	},
-	{
-		.name	= "uboot-env",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_128K,
-	},
-	{
-		.name	= "linux",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_2M,
-	},
-	{
-		.name	= "rootfs",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(tqma9263_nand_partition);
-	return tqma9263_nand_partition;
-}
-
-static struct atmel_nand_data __initdata tqma9263_nand_data = {
-	.ale			= 21,
-	.cle			= 22,
-	.rdy_pin		= AT91_PIN_PD14,
-	.enable_pin		= AT91_PIN_PD15,
-};
-
-static struct sam9_smc_config __initdata tqma9263_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init tqma9263_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &tqma9263_nand_smc_config);
-
-	at91_add_device_nand(&tqma9263_nand_data);
-}
-
-
-static void __init tqma9263_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&tqma9263_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&tqma9263_udc_data);
-	/* MMC */
-	at91_add_device_mmc(1, &tqma9263_mmc_data);
-	/* I2C */
-	at91_add_device_i2c(tqma9263_i2c_devices, ARRAY_SIZE(tqma9263_i2c_devices));
-	/* Ethernet */
-	at91_add_device_eth(&tqma9263_macb_data);
-	/* NAND flash */
-	tqma9263_add_device_nand();
-}
-
-MACHINE_START(TQMA9263, "TQ Components TQMa9263")
-	/* Maintainer: Michael Heimpold */
-	.timer		= &at91sam926x_timer,
-	.map_io		= tqma9263_map_io,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= tqma9263_board_init,
-MACHINE_END
diff --git a/target/linux/at91/patches-3.10/700-tqma9263-support.patch b/target/linux/at91/patches-3.10/700-tqma9263-support.patch
deleted file mode 100644
index d249783a3e..0000000000
--- a/target/linux/at91/patches-3.10/700-tqma9263-support.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/arm/mach-at91/Kconfig.non_dt
-+++ b/arch/arm/mach-at91/Kconfig.non_dt
-@@ -258,6 +258,12 @@ config MACH_USB_A9263
- 	  Select this if you are using a Calao Systems USB-A9263.
- 	  <http://www.calao-systems.com>
- 
-+config MACH_TQMA9263
-+	bool "TQ Components TQMa9263 board"
-+	help
-+	  Select this if you are using the an TQ Components TQMa9263 board.
-+	  <http://www.tq-components.com/>
-+
- endif
- 
- # ----------------------------------------------------------
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -68,6 +68,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar
- # AT91SAM9263 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
- obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a926x.o
-+obj-$(CONFIG_MACH_TQMA9263)	+= board-tqma9263.o
- 
- # AT91SAM9RL board-specific support
- obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
diff --git a/target/linux/at91/patches-3.14/700-tqma9263-support.patch b/target/linux/at91/patches-3.14/700-tqma9263-support.patch
deleted file mode 100644
index 5c042dacb9..0000000000
--- a/target/linux/at91/patches-3.14/700-tqma9263-support.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/arm/mach-at91/Kconfig.non_dt
-+++ b/arch/arm/mach-at91/Kconfig.non_dt
-@@ -281,6 +281,12 @@ config MACH_AT91SAM9G10EK
- 	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
- 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
- 
-+config MACH_TQMA9263
-+	bool "TQ Components TQMa9263 board"
-+	help
-+	  Select this if you are using the an TQ Components TQMa9263 board.
-+	  <http://www.tq-components.com/>
-+
- endif
- 
- # ----------------------------------------------------------
---- a/arch/arm/mach-at91/Makefile
-+++ b/arch/arm/mach-at91/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar
- 
- # AT91SAM9263 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-+obj-$(CONFIG_MACH_TQMA9263)	+= board-tqma9263.o
- 
- # AT91SAM9RL board-specific support
- obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o