From: Florian Fainelli Date: Sun, 8 Apr 2007 17:20:01 +0000 (+0000) Subject: Major cleanup : - no more Broadcom kerSys* code - working runtime boot loader detecti... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ebfd23d3b4233965b9094f640f633228f0b44984;p=openwrt%2Fstaging%2Fldir.git Major cleanup : - no more Broadcom kerSys* code - working runtime boot loader detection - updated flash map driver SVN-Revision: 6896 --- diff --git a/target/linux/brcm63xx-2.6/config/default b/target/linux/brcm63xx-2.6/config/default index 1d80fda4b3..491d4e0579 100644 --- a/target/linux/brcm63xx-2.6/config/default +++ b/target/linux/brcm63xx-2.6/config/default @@ -1,41 +1,12 @@ CONFIG_32BIT=y # CONFIG_64BIT is not set # CONFIG_64BIT_PHYS_ADDR is not set +# CONFIG_8139TOO is not set CONFIG_AUDIT=y CONFIG_AUDIT_GENERIC=y +# CONFIG_B44 is not set CONFIG_BASE_SMALL=0 -# CONFIG_BCM96338 is not set -# CONFIG_BCM96345 is not set -CONFIG_BCM96348=y CONFIG_BCM963XX=y -# CONFIG_BCM_ADSL is not set -CONFIG_BCM_ADSL_IMPL=1 -# CONFIG_BCM_ATMAPI is not set -CONFIG_BCM_ATMAPI_IMPL=1 -# CONFIG_BCM_ATMTEST is not set -CONFIG_BCM_ATMTEST_IMPL=1 -CONFIG_BCM_BLAA_IMPL=1 -# CONFIG_BCM_BOARD is not set -CONFIG_BCM_BOARD_IMPL=1 -# CONFIG_BCM_ENDPOINT is not set -CONFIG_BCM_ENDPOINT_IMPL=1 -# CONFIG_BCM_ENET is not set -CONFIG_BCM_ENET_IMPL=1 -# CONFIG_BCM_HPNA is not set -CONFIG_BCM_HPNA_IMPL=0 -CONFIG_BCM_PCI=y -CONFIG_BCM_PROCFS=y -CONFIG_BCM_PROCFS_IMPL=1 -# CONFIG_BCM_SECURITY is not set -CONFIG_BCM_SECURITY_IMPL=1 -CONFIG_BCM_SERIAL=y -CONFIG_BCM_SERIAL_IMPL=1 -# CONFIG_BCM_USB is not set -CONFIG_BCM_USB_IMPL=1 -# CONFIG_BCM_VDSL is not set -CONFIG_BCM_VDSL_IMPL=1 -# CONFIG_BCM_WLAN is not set -CONFIG_BCM_WLAN_IMPL=1 CONFIG_BINFMT_MISC=m # CONFIG_BLK_DEV_INITRD is not set CONFIG_BLK_DEV_IO_TRACE=y @@ -43,9 +14,7 @@ CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BSD_DISKLABEL is not set CONFIG_BSD_PROCESS_ACCT_V3=y -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIBPA10X is not set +CONFIG_CFE=y CONFIG_CICADA_PHY=m # CONFIG_CIFS is not set # CONFIG_CLS_U32_MARK is not set @@ -140,6 +109,7 @@ CONFIG_EQUALIZER=m CONFIG_FIRMWARE_EDID=y # CONFIG_FIXED_PHY is not set CONFIG_FORCED_INLINING=y +CONFIG_FS_POSIX_ACL=y CONFIG_FW_LOADER=m CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_GEN_RTC is not set @@ -181,8 +151,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_TUNNEL=m -CONFIG_IPW2100_DEBUG=y -CONFIG_IPW2200_DEBUG=y # CONFIG_IP_DCCP_DEBUG is not set CONFIG_IP_MROUTE=y # CONFIG_IP_NF_ARPTABLES is not set @@ -215,6 +183,7 @@ CONFIG_KEYBOARD_ATKBD=m # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KGDB is not set CONFIG_KMOD=y +# CONFIG_LAN_SAA9730 is not set CONFIG_LBD=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LLC2 is not set @@ -273,20 +242,20 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +CONFIG_MTD_CFI_BE_BYTE_SWAP=y # CONFIG_MTD_CFI_GEOMETRY is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_CFI_NOSWAP is not set +CONFIG_MTD_CFI_STAA=y CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_CHAR=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_CONCAT=y # CONFIG_MTD_CSTM_MIPS_IXX is not set CONFIG_MTD_DEBUG=y @@ -303,12 +272,10 @@ CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_NAND is not set -CONFIG_MTD_OBSOLETE_CHIPS=y +# CONFIG_MTD_OBSOLETE_CHIPS is not set # CONFIG_MTD_ONENAND is not set # CONFIG_MTD_OTP is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_PLATRAM is not set @@ -319,8 +286,9 @@ CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_ROM is not set -# CONFIG_MTD_SHARP is not set # CONFIG_MTD_SLRAM is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NETFILTER_NETLINK_QUEUE=m @@ -330,7 +298,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m # CONFIG_NET_ACT_IPT is not set CONFIG_NET_ACT_SIMP=m CONFIG_NET_KEY=y -# CONFIG_NET_PCI is not set CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y # CONFIG_NET_SCH_CLK_JIFFIES is not set # CONFIG_NET_VENDOR_3COM is not set @@ -342,7 +309,7 @@ CONFIG_NLS_ASCII=m CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_PAGE_SIZE_8KB is not set -CONFIG_PCI_DEBUG=y +# CONFIG_PCI_DEBUG is not set CONFIG_PHYLIB=m # CONFIG_PMC_YOSEMITE is not set # CONFIG_PNX8550_JBS is not set @@ -415,68 +382,11 @@ CONFIG_TIPC=m # CONFIG_TOSHIBA_RBTX4938 is not set CONFIG_TRAD_SIGNALS=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_DEVICEFS is not set -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_EHCI_SPLIT_ISO=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ARK3116 is not set -# CONFIG_USB_SERIAL_CP2101 is not set -# CONFIG_USB_SERIAL_CYBERJACK is not set -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_EMPEG is not set -# CONFIG_USB_SERIAL_FUNSOFT is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_GENERIC is not set -# CONFIG_USB_SERIAL_HP4X is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_MOS7720 is not set -# CONFIG_USB_SERIAL_MOS7840 is not set -# CONFIG_USB_SERIAL_NAVMAN is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set -# CONFIG_USB_SERIAL_TI is not set -# CONFIG_USB_SERIAL_WHITEHEAT is not set -# CONFIG_USB_SERIAL_XIRCOM is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_USBNET_MII is not set +# CONFIG_VIA_RHINE is not set CONFIG_VLAN_8021Q=m CONFIG_VM_EVENT_COUNTERS=y CONFIG_WAN_ROUTER=m # CONFIG_WATCHDOG is not set # CONFIG_XFS_FS is not set -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_TOSHIBA=y diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig deleted file mode 100644 index 1418f4873d..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Kconfig +++ /dev/null @@ -1,138 +0,0 @@ -# Kernel and Driver configuration for Broadcom Commengine ADSL board -choice - prompt "Broadcom Commengine ADSL board" - depends on BCM963XX - default BCM96348 - help - Select different Broadcom ADSL board - -config BCM96338 - bool "96338 ADSL board" - select DMA_NONCOHERENT - select HW_HAS_PCI - -config BCM96345 - bool "96345 ADSL board" - select DMA_NONCOHERENT - select HW_HAS_PCI - -config BCM96348 - bool "96348 ADSL board" - select DMA_NONCOHERENT - select HW_HAS_PCI - -endchoice - -config BCM_BOARD - bool "Support for Broadcom Board" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_SERIAL - bool "Support for Serial Port" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ENET - tristate "Support for Ethernet" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_USB - tristate "Support for USB" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_WLAN - tristate "Support for Wireless" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_PCI - bool "Support for PCI" - depends on BCM96338 || BCM96345 || BCM96348 - select PCI - -config BCM_ATMAPI - tristate "Support for ATM" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ATMTEST - tristate "Support for ATM Diagnostic" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ADSL - tristate "Support for ADSL" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ENDPOINT - tristate "Support for VOICE" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_PROCFS - tristate "Support for PROCFS" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_VDSL - tristate "Support for VDSL" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_SECURITY - tristate "Support for SECURITY" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_HPNA - tristate "Support for HPNA" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_BOARD_IMPL - int "Implementation index for ADSL Board" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_SERIAL_IMPL - int "Implementation index for Serial" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ENET_IMPL - int "Implementation index for Ethernet" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_USB_IMPL - int "Implementation index for USB" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_WLAN_IMPL - int "Implementation index for WIRELESS" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ATMAPI_IMPL - int "Implementation index for ATM" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ATMTEST_IMPL - int "Implementation index for ATM Diagnostic" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_BLAA_IMPL - int "Implementation index for BLAA" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ADSL_IMPL - int "Implementation index for ADSL" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_ENDPOINT_IMPL - int "Implementation index for VOICE" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_PROCFS_IMPL - int "Implementation index for PROCFS" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_VDSL_IMPL - int "Implementation index for VDSL" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_SECURITY_IMPL - int "Implementation index for SECURITY" - depends on BCM96338 || BCM96345 || BCM96348 - -config BCM_HPNA_IMPL - int "Implementation index for HPNA" - depends on BCM96338 || BCM96345 || BCM96348 - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile index cf524fa64a..aa3654ae50 100644 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile @@ -1,23 +1,9 @@ # -# Makefile for generic Broadcom MIPS boards +# Makefile for the Broadcom BCM963xx SoC specific parts of the kernel # # Copyright (C) 2004 Broadcom Corporation # -obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o +obj-y := irq.o prom.o setup.o time.o ser_init.o int-handler.o info.o SRCBASE := $(TOPDIR) EXTRA_CFLAGS += -I$(SRCBASE)/include -#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG -EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) - - -ifeq "$(ADSL)" "ANNEX_B" -EXTRA_CFLAGS += -DADSL_ANNEXB -endif -ifeq "$(ADSL)" "SADSL" -EXTRA_CFLAGS += -DADSL_SADSL -endif -ifeq "$(ADSL)" "ANNEX_C" -EXTRA_CFLAGS += -DADSL_ANNEXC -endif - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c deleted file mode 100644 index 8de0f91db9..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/bcm63xx_led.c +++ /dev/null @@ -1,582 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ -/*************************************************************************** - * File Name : bcm63xx_led.c - * - * Description: - * - * This file contains bcm963xx board led control API functions. - * - * To use it, do the following - * - * 1). define in the board.c the following led mappping (this is for 6345GW board): - * const LED_MAP_PAIR cLedMapping45GW[] = - * { // led name Initial state physical pin (ledMask) - * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, - * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, - * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 - * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, - * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, - * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. - * - * 2). };To initialize led API and initial state of the leds, call the following function with the mapping - * pointer from the above struct - * - * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); - * - * 3). Sample call for kernel mode: - * - * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h - * - * 4). Sample call for user mode - * - * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h - * - * - * Created on : 10/28/2002 seanl - * - ***************************************************************************/ - -/* Includes. */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define k100ms (HZ / 10) // ~100 ms -#define kFastBlinkCount 0 // ~100ms -#define kSlowBlinkCount 5 // ~600ms - -#define MAX_VIRT_LEDS 12 - -// uncomment // for debug led -//#define DEBUG_LED - -// global variables: -struct timer_list gLedTimer; -int gTimerOn = FALSE; -int gLedCount = 0; - -typedef struct ledinfo -{ - unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 - unsigned short ledActiveLow; // GPIO bit reset to turn on LED - unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 - unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED - BOARD_LED_STATE ledState; // current led state - BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState - int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. -} LED_INFO, *PLED_INFO; - -static PLED_INFO gLed = NULL; -static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; -static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; -static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; - -#if 0 /* BROKEN */ -#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -static int gLedOffInBridgeMode = 1; -#elif defined(CONFIG_BCM96345) -static int gLedOffInBridgeMode = 0; -#endif -#endif - -void ledTimerExpire(void); -int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); - -//************************************************************************************** -// LED operations -//************************************************************************************** - -// turn led on and set the ledState -void ledOn(PLED_INFO pLed) -{ - if( pLed->ledMask ) - { - GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one - if( pLed->ledActiveLow ) - GPIO->GPIOio &= ~pLed->ledMask; // turn on the led - else - GPIO->GPIOio |= pLed->ledMask; // turn on the led - pLed->ledState = pLed->savedLedState = kLedStateOn; - } -} - - -// turn led off and set the ledState -void ledOff(PLED_INFO pLed) -{ - if( pLed->ledMask ) - { - GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one - if( pLed->ledActiveLow ) - GPIO->GPIOio |= pLed->ledMask; // turn off the led - else - GPIO->GPIOio &= ~pLed->ledMask; // turn off the led - pLed->ledState = pLed->savedLedState = kLedStateOff; - } -} - -// turn led on and set the ledState -void ledOnFail(PLED_INFO pLed) -{ - if( pLed->ledMaskFail ) - { - GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one - if( pLed->ledActiveLowFail ) - GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led - else - GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led - pLed->ledState = pLed->savedLedState = kLedStateFail; - } -} - - -// turn led off and set the ledState -void ledOffFail(PLED_INFO pLed) -{ - if( pLed->ledMaskFail ) - { - GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one - if( pLed->ledActiveLowFail ) - GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led - else - GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led - pLed->ledState = pLed->savedLedState = kLedStateOff; - } -} - - -// toggle the led and return the current ledState -BOARD_LED_STATE ledToggle(PLED_INFO pLed) -{ - GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one - if (GPIO->GPIOio & pLed->ledMask) - { - GPIO->GPIOio &= ~(pLed->ledMask); - return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); - } - else - { - GPIO->GPIOio |= pLed->ledMask; - return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); - } -} - - -// led timer. Will return if timer is already on -void ledTimerStart(void) -{ - if (gTimerOn) - return; - -#if defined(DEBUG_LED) - printk("led: add_timer\n"); -#endif - - init_timer(&gLedTimer); - gLedTimer.function = (void*)ledTimerExpire; - gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms - add_timer (&gLedTimer); - gTimerOn = TRUE; -} - - -// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and -// restart the timer according to ledState -void ledTimerExpire(void) -{ - int i; - PLED_INFO pCurLed; - - gTimerOn = FALSE; - - for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) - { -#if defined(DEBUG_LED) - printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); -#endif - switch (pCurLed->ledState) - { - case kLedStateOn: - case kLedStateOff: - case kLedStateFail: - pCurLed->blinkCountDown = 0; // reset the blink count down - break; - - case kLedStateBlinkOnce: - ledToggle(pCurLed); - pCurLed->blinkCountDown = 0; // reset to 0 - pCurLed->ledState = pCurLed->savedLedState; - if (pCurLed->ledState == kLedStateSlowBlinkContinues || - pCurLed->ledState == kLedStateFastBlinkContinues) - ledTimerStart(); // start timer if in blinkContinues stats - break; - - case kLedStateSlowBlinkContinues: - if (pCurLed->blinkCountDown-- == 0) - { - pCurLed->blinkCountDown = kSlowBlinkCount; - ledToggle(pCurLed); - } - ledTimerStart(); - break; - - case kLedStateFastBlinkContinues: - if (pCurLed->blinkCountDown-- == 0) - { - pCurLed->blinkCountDown = kFastBlinkCount; - ledToggle(pCurLed); - } - ledTimerStart(); - break; - - default: - printk("Invalid state = %d\n", pCurLed->ledState); - } - } -} - -// initialize the gLedCount and allocate and fill gLed struct -void __init boardLedInit(PLED_MAP_PAIR cLedMapping) -{ - PLED_MAP_PAIR p1, p2; - PLED_INFO pCurLed; - int needTimer = FALSE; - int alreadyUsed = 0; - -#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) - /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ - GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; - GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; -#endif - - memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); - memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); - memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); - - gLedCount = 0; - - // Check for multiple LED names and multiple LED GPIO pins that share the - // same physical board LED. - for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) - { - alreadyUsed = 0; - for( p2 = cLedMapping; p2 != p1; p2++ ) - { - if( (p1->ledMask && p1->ledMask == p2->ledMask) || - (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) - { - alreadyUsed = 1; - break; - } - } - - if( alreadyUsed == 0 ) - gLedCount++; - } - - gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); - if( gLed == NULL ) - { - printk( "LED memory allocation error.\n" ); - return; - } - - memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); - - // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led - // (ledMask) the first defined led's ledInitState will be used. - pCurLed = gLed; - for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) - { - if( (int) p1->ledName > MAX_VIRT_LEDS ) - continue; - - alreadyUsed = 0; - for( p2 = cLedMapping; p2 != p1; p2++ ) - { - if( (p1->ledMask && p1->ledMask == p2->ledMask) || - (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) - { - alreadyUsed = 1; - break; - } - } - - if( alreadyUsed == 0 ) - { - // Initialize the board LED for the first time. - needTimer = initLedInfo( p1, pCurLed ); - gpVirtLeds[(int) p1->ledName] = pCurLed; - pCurLed++; - } - else - { - PLED_INFO pLed; - for( pLed = gLed; pLed != pCurLed; pLed++ ) - { - // Find the LED_INFO structure that has already been initialized. - if((pLed->ledMask && pLed->ledMask == p1->ledMask) || - (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) - { - // The board LED has already been initialized but possibly - // not completely initialized. - if( p1->ledMask ) - { - pLed->ledMask = p1->ledMask; - pLed->ledActiveLow = p1->ledActiveLow; - } - if( p1->ledMaskFail ) - { - pLed->ledMaskFail = p1->ledMaskFail; - pLed->ledActiveLowFail = p1->ledActiveLowFail; - } - gpVirtLeds[(int) p1->ledName] = pLed; - break; - } - } - } - } - - if (needTimer) - ledTimerStart(); - -#if defined(DEBUG_LED) - int i; - for (i=0; i < gLedCount; i++) - printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); -#endif - -} - -// Initialize a structure that contains information about a physical board LED -// control. The board LED may contain more than one GPIO pin to control a -// normal condition (green) or a failure condition (red). -int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) -{ - int needTimer = FALSE; - pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; - pCurLed->ledMask = pCurMap->ledMask; - pCurLed->ledActiveLow = pCurMap->ledActiveLow; - pCurLed->ledMaskFail = pCurMap->ledMaskFail; - pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; - - switch (pCurLed->ledState) - { - case kLedStateOn: - pCurLed->blinkCountDown = 0; // reset the blink count down - ledOn(pCurLed); - break; - case kLedStateOff: - pCurLed->blinkCountDown = 0; // reset the blink count down - ledOff(pCurLed); - break; - case kLedStateFail: - pCurLed->blinkCountDown = 0; // reset the blink count down - ledOnFail(pCurLed); - break; - case kLedStateBlinkOnce: - pCurLed->blinkCountDown = 1; - needTimer = TRUE; - break; - case kLedStateSlowBlinkContinues: - pCurLed->blinkCountDown = kSlowBlinkCount; - needTimer = TRUE; - break; - case kLedStateFastBlinkContinues: - pCurLed->blinkCountDown = kFastBlinkCount; - needTimer = TRUE; - break; - default: - printk("Invalid state = %d\n", pCurLed->ledState); - } - - return( needTimer ); -} - -#if 0 /* BROKEN */ -// Determines if there is at least one interface in bridge mode. Bridge mode -// is determined by the cfm convention of naming bridge interfaces nas17 -// through nas24. -static int isBridgedProtocol(void) -{ - extern int dev_get(const char *name); - const int firstBridgeId = 17; - const int lastBridgeId = 24; - int i; - int ret = FALSE; - char name[16]; - - for( i = firstBridgeId; i <= lastBridgeId; i++ ) - { - sprintf( name, "nas%d", i ); - - if( dev_get(name) ) - { - ret = TRUE; - break; - } - } - - return(ret); -} -#endif - -// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation -void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -{ - PLED_INFO ledInfoPtr; - - // do the mapping from virtual to physical led - if( (int) ledName < MAX_VIRT_LEDS ) - ledInfoPtr = gpVirtLeds[(int) ledName]; - else - ledInfoPtr = NULL; - - if (ledInfoPtr == NULL) - return; - - if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) - { - (*gLedHwFunc[(int) ledName]) (ledName, ledState); - ledOffFail(ledInfoPtr); - return; - } - else - if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) - { - (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); - ledOff(ledInfoPtr); - return; - } - -#if 0 /* BROKEN */ - // Do not blink the WAN Data LED if at least one interface is in bridge mode. - if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) - { - static int BridgedProtocol = -1; - - if( BridgedProtocol == -1 ) - BridgedProtocol = isBridgedProtocol(); - - if( BridgedProtocol == TRUE ) - return; - } -#endif - - // If the state is kLedStateFail and there is not a failure LED defined - // in the board parameters, change the state to kLedStateFastBlinkContinues. - if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) - ledState = kLedStateFastBlinkContinues; - - switch (ledState) - { - case kLedStateOn: - // First, turn off the complimentary (failure) LED GPIO. - if( ledInfoPtr->ledMaskFail ) - ledOffFail(ledInfoPtr); - else - if( gLedHwFailFunc[(int) ledName] ) - (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); - - // Next, turn on the specified LED GPIO. - ledOn(ledInfoPtr); - break; - - case kLedStateOff: - // First, turn off the complimentary (failure) LED GPIO. - if( ledInfoPtr->ledMaskFail ) - ledOffFail(ledInfoPtr); - else - if( gLedHwFailFunc[(int) ledName] ) - (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); - - // Next, turn off the specified LED GPIO. - ledOff(ledInfoPtr); - break; - - case kLedStateFail: - // First, turn off the complimentary (normal) LED GPIO. - if( ledInfoPtr->ledMask ) - ledOff(ledInfoPtr); - else - if( gLedHwFunc[(int) ledName] ) - (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); - - // Next, turn on (red) the specified LED GPIO. - ledOnFail(ledInfoPtr); - break; - - case kLedStateBlinkOnce: - // skip blinkOnce if it is already in Slow/Fast blink continues state - if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || - ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) - ; - else - { - if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 - { - ledToggle(ledInfoPtr); - ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires - ledInfoPtr->ledState = kLedStateBlinkOnce; - ledTimerStart(); - } - } - break; - - case kLedStateSlowBlinkContinues: - ledInfoPtr->blinkCountDown = kSlowBlinkCount; - ledInfoPtr->ledState = kLedStateSlowBlinkContinues; - ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; - ledTimerStart(); - break; - - case kLedStateFastBlinkContinues: - ledInfoPtr->blinkCountDown = kFastBlinkCount; - ledInfoPtr->ledState = kLedStateFastBlinkContinues; - ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; - ledTimerStart(); - break; - - default: - printk("Invalid led state\n"); - } -} - -// This function is called for an LED that is controlled by hardware. -void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, - HANDLE_LED_FUNC ledHwFunc, int ledFailType ) -{ - if( (int) ledName < MAX_VIRT_LEDS ) - { - if( ledFailType == 1 ) - gLedHwFailFunc[(int) ledName] = ledHwFunc; - else - gLedHwFunc[(int) ledName] = ledHwFunc; - } -} - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c deleted file mode 100644 index e54b960504..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/board.c +++ /dev/null @@ -1,559 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -/* Includes. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include "boardparms.h" -#include "bcm_intr.h" -#include "board.h" -#include "bcm_map_part.h" - -static DEFINE_SPINLOCK(board_lock); - -/* Typedefs. */ -#if defined (NON_CONSECUTIVE_MAC) -// used to be the last octet. Now changed to the first 5 bits of the the forth octet -// to reduced the duplicated MAC addresses. -#define CHANGED_OCTET 3 -#define SHIFT_BITS 3 -#else -#define CHANGED_OCTET 1 -#define SHIFT_BITS 0 -#endif - -typedef struct -{ - unsigned long ulId; - char chInUse; - char chReserved[3]; -} MAC_ADDR_INFO, *PMAC_ADDR_INFO; - -typedef struct -{ - unsigned long ulSdramSize; - unsigned long ulPsiSize; - unsigned long ulNumMacAddrs; - unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; - MAC_ADDR_INFO MacAddrs[1]; -} NVRAM_INFO, *PNVRAM_INFO; - -typedef struct -{ - unsigned long eventmask; -} BOARD_IOC, *PBOARD_IOC; - - -/*Dyinggasp callback*/ -typedef void (*cb_dgasp_t)(void *arg); -typedef struct _CB_DGASP__LIST -{ - struct list_head list; - char name[IFNAMSIZ]; - cb_dgasp_t cb_dgasp_fn; - void *context; -}CB_DGASP_LIST , *PCB_DGASP_LIST; - - -static LED_MAP_PAIR LedMapping[] = -{ // led name Initial state physical pin (ledMask) - {kLedEnd, kLedStateOff, 0, 0, 0, 0}, - {kLedEnd, kLedStateOff, 0, 0, 0, 0}, - {kLedEnd, kLedStateOff, 0, 0, 0, 0}, - {kLedEnd, kLedStateOff, 0, 0, 0, 0}, - {kLedEnd, kLedStateOff, 0, 0, 0, 0}, - {kLedEnd, kLedStateOff, 0, 0, 0, 0}, - {kLedEnd, kLedStateOff, 0, 0, 0, 0}, - {kLedEnd, kLedStateOff, 0, 0, 0, 0}, - {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. -}; - -/* Externs. */ -extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); -extern unsigned int nr_free_pages (void); -extern const char *get_system_type(void); -extern void kerSysFlashInit(void); -extern unsigned long get_nvram_start_addr(void); -extern unsigned long get_scratch_pad_start_addr(void); -extern unsigned long getMemorySize(void); -extern void __init boardLedInit(PLED_MAP_PAIR); -extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, - HANDLE_LED_FUNC ledHwFunc, int ledFailType ); - -/* Prototypes. */ -void __init InitNvramInfo( void ); - -/* DyingGasp function prototype */ -static void __init kerSysDyingGaspMapIntr(void); -static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id); -static void __init kerSysInitDyingGaspHandler( void ); -static void __exit kerSysDeinitDyingGaspHandler( void ); -/* -DyingGasp function prototype - */ - -static PNVRAM_INFO g_pNvramInfo = NULL; -static int g_ledInitialized = 0; -static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; - -static int g_wakeup_monitor = 0; -static struct file *g_monitor_file = NULL; -static struct task_struct *g_monitor_task = NULL; -static unsigned int (*g_orig_fop_poll) - (struct file *, struct poll_table_struct *) = NULL; - -void kerSysMipsSoftReset(void) -{ - if (PERF->RevID == 0x634800A1) { - typedef void (*FNPTR) (void); - FNPTR bootaddr = (FNPTR) FLASH_BASE; - int i; - - /* Disable interrupts. */ - //cli(); - spin_lock_irq(&board_lock); - - /* Reset all blocks. */ - PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; - for( i = 0; i < 1000000; i++ ) - ; - PERF->BlockSoftReset |= BSR_ALL_BLOCKS; - /* Jump to the power on address. */ - (*bootaddr) (); - } - else - PERF->pll_control |= SOFT_RESET; // soft reset mips -} - - -int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) -{ - int nRet = 0; - PMAC_ADDR_INFO pMai = NULL; - PMAC_ADDR_INFO pMaiFreeNoId = NULL; - PMAC_ADDR_INFO pMaiFreeId = NULL; - unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; - - /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas - * * à relire plusieurs fois */ - /* inv_xde */ -#if 0 - if (boot_loader_type == BOOT_CFE) - memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, - NVRAM_MAC_ADDRESS_LEN ); - else { -#endif - pucaMacAddr[0] = 0x00; - pucaMacAddr[1] = 0x07; - pucaMacAddr[2] = 0x3A; - pucaMacAddr[3] = 0xFF; - pucaMacAddr[4] = 0xFF; - pucaMacAddr[5] = 0xFF; -#if 0 - } -#endif - - return nRet; -} /* kerSysGetMacAddr */ - -int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) -{ - int nRet = -EINVAL; - unsigned long ulIdx = 0; - int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - - g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); - - // if overflow 255 (negitive), add 256 to have the correct index - if (idx < 0) - idx += 256; - ulIdx = (unsigned long) (idx >> SHIFT_BITS); - - if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) - { - PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; - if( pMai->chInUse == 1 ) - { - pMai->chInUse = 0; - nRet = 0; - } - } - - return( nRet ); -} /* kerSysReleaseMacAddr */ - -int kerSysGetSdramSize( void ) -{ - if (boot_loader_type == BOOT_CFE) { - return( (int) g_pNvramInfo->ulSdramSize ); - } - else { - printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000); - return((int)getMemorySize() + 0x00040000); - } -} /* kerSysGetSdramSize */ - - -void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -{ - if (g_ledInitialized) - boardLedCtrl(ledName, ledState); -} - -unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) -{ - int mask = (*g_orig_fop_poll) (f, t); - - if( g_wakeup_monitor == 1 && g_monitor_file == f ) - { - /* If g_wakeup_monitor is non-0, the user mode application needs to - * return from a blocking select function. Return POLLPRI which will - * cause the select to return with the exception descriptor set. - */ - mask |= POLLPRI; - g_wakeup_monitor = 0; - } - - return( mask ); -} - -/* Put the user mode application that monitors link state on a run queue. */ -void kerSysWakeupMonitorTask( void ) -{ - g_wakeup_monitor = 1; - if( g_monitor_task ) - wake_up_process( g_monitor_task ); -} - -//<GPIOio; - - if( (gpio & ~BP_ACTIVE_MASK) >= 32 ) - { - gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio); - gpio_reg = &GPIO->GPIOio_high; - } - //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg); - if(*gpio_reg & gpio_mask) //press down - return RESET_BUTTON_UP; - } - return RESET_BUTTON_PRESSDOWN; -} -//<WatchDogDefCount = timeUs * (FPERIPH/1000000); - TIMER->WatchDogCtl = 0xFF00; - TIMER->WatchDogCtl = 0x00FF; -} - -ulong kerSysGetCycleCount(void) -{ - ulong cnt; -#ifdef _WIN32_WCE - cnt = 0; -#else - __asm volatile("mfc0 %0, $9":"=d"(cnt)); -#endif - return(cnt); -} - -static Bool kerSysDyingGaspCheckPowerLoss(void) -{ - ulong clk0; - ulong ulIntr; - - ulIntr = 0; - clk0 = kerSysGetCycleCount(); - - UART->Data = 'D'; - UART->Data = '%'; - UART->Data = 'G'; - -#if defined(CONFIG_BCM96345) - BpGetAdslDyingGaspExtIntr( &ulIntr ); - - do { - ulong clk1; - - clk1 = kerSysGetCycleCount(); /* time cleared */ - /* wait a little to get new reading */ - while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) - ; - } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); - - if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ - BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); - KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); - return 0; - } -#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) - do { - ulong clk1; - - clk1 = kerSysGetCycleCount(); /* time cleared */ - /* wait a little to get new reading */ - while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) - ; - } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); - - if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { - BcmHalInterruptEnable( INTERRUPT_ID_DG ); - KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); - return 0; - } -#endif - return 1; -} - -static void kerSysDyingGaspShutdown( void ) -{ - kerSysSetWdTimer(1000000); -#if defined(CONFIG_BCM96345) - PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); -#elif defined(CONFIG_BCM96348) - PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); -#endif -} - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id) -#else -static unsigned int kerSysDyingGaspIsr(void) -#endif -{ - struct list_head *pos; - CB_DGASP_LIST *tmp, *dsl = NULL; - - if (kerSysDyingGaspCheckPowerLoss()) { - - /* first to turn off everything other than dsl */ - list_for_each(pos, &g_cb_dgasp_list_head->list) { - tmp = list_entry(pos, CB_DGASP_LIST, list); - if(strncmp(tmp->name, "dsl", 3)) { - (tmp->cb_dgasp_fn)(tmp->context); - }else { - dsl = tmp; - } - } - - /* now send dgasp */ - if(dsl) - (dsl->cb_dgasp_fn)(dsl->context); - - /* reset and shutdown system */ - kerSysDyingGaspShutdown(); - } -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -return( IRQ_HANDLED ); -#else - return( 1 ); -#endif -} - -static void __init kerSysInitDyingGaspHandler( void ) -{ - CB_DGASP_LIST *new_node; - - if( g_cb_dgasp_list_head != NULL) { - printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); - return; - } - new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); - memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); - INIT_LIST_HEAD(&new_node->list); - g_cb_dgasp_list_head = new_node; - -} /* kerSysInitDyingGaspHandler */ - -static void __exit kerSysDeinitDyingGaspHandler( void ) -{ - struct list_head *pos; - CB_DGASP_LIST *tmp; - - if(g_cb_dgasp_list_head == NULL) - return; - - list_for_each(pos, &g_cb_dgasp_list_head->list) { - tmp = list_entry(pos, CB_DGASP_LIST, list); - list_del(pos); - kfree(tmp); - } - - kfree(g_cb_dgasp_list_head); - g_cb_dgasp_list_head = NULL; - -} /* kerSysDeinitDyingGaspHandler */ - -void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) -{ - CB_DGASP_LIST *new_node; - - if( g_cb_dgasp_list_head == NULL) { - printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); - return; - } - - if( devname == NULL || cbfn == NULL ) { - printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); - return; - } - - new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); - memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); - INIT_LIST_HEAD(&new_node->list); - strncpy(new_node->name, devname, IFNAMSIZ); - new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; - new_node->context = context; - list_add(&new_node->list, &g_cb_dgasp_list_head->list); - - printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); - -} /* kerSysRegisterDyingGaspHandler */ - -void kerSysDeregisterDyingGaspHandler(char *devname) -{ - struct list_head *pos; - CB_DGASP_LIST *tmp; - - if(g_cb_dgasp_list_head == NULL) { - printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); - return; - } - - if(devname == NULL) { - printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); - return; - } - - printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); - - list_for_each(pos, &g_cb_dgasp_list_head->list) { - tmp = list_entry(pos, CB_DGASP_LIST, list); - if(!strcmp(tmp->name, devname)) { - list_del(pos); - kfree(tmp); - printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); - return; - } - } - printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); - -} /* kerSysDeregisterDyingGaspHandler */ - -//EXPORT_SYMBOL(kerSysNvRamGet); -EXPORT_SYMBOL(kerSysGetMacAddress); -EXPORT_SYMBOL(kerSysReleaseMacAddress); -EXPORT_SYMBOL(kerSysGetSdramSize); -EXPORT_SYMBOL(kerSysLedCtrl); -EXPORT_SYMBOL(kerSysGetResetHold); -EXPORT_SYMBOL(kerSysLedRegisterHwHandler); -EXPORT_SYMBOL(BpGetBoardIds); -EXPORT_SYMBOL(BpGetSdramSize); -EXPORT_SYMBOL(BpGetPsiSize); -EXPORT_SYMBOL(BpGetEthernetMacInfo); -EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); -EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); -EXPORT_SYMBOL(BpGetVoipResetGpio); -EXPORT_SYMBOL(BpGetVoipIntrGpio); -EXPORT_SYMBOL(BpGetPcmciaResetGpio); -EXPORT_SYMBOL(BpGetRtsCtsUartGpios); -EXPORT_SYMBOL(BpGetAdslLedGpio); -EXPORT_SYMBOL(BpGetAdslFailLedGpio); -EXPORT_SYMBOL(BpGetWirelessLedGpio); -EXPORT_SYMBOL(BpGetUsbLedGpio); -EXPORT_SYMBOL(BpGetHpnaLedGpio); -EXPORT_SYMBOL(BpGetWanDataLedGpio); -EXPORT_SYMBOL(BpGetPppLedGpio); -EXPORT_SYMBOL(BpGetPppFailLedGpio); -EXPORT_SYMBOL(BpGetVoipLedGpio); -EXPORT_SYMBOL(BpGetWirelessExtIntr); -EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); -EXPORT_SYMBOL(BpGetVoipExtIntr); -EXPORT_SYMBOL(BpGetHpnaExtIntr); -EXPORT_SYMBOL(BpGetHpnaChipSelect); -EXPORT_SYMBOL(BpGetVoipChipSelect); -EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); -EXPORT_SYMBOL(BpGetWirelessSesExtIntr); -EXPORT_SYMBOL(BpGetWirelessSesLedGpio); -EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); -EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); -EXPORT_SYMBOL(kerSysGetCycleCount); -EXPORT_SYMBOL(kerSysSetWdTimer); -EXPORT_SYMBOL(kerSysWakeupMonitorTask); - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c deleted file mode 100644 index 1143ded744..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.c +++ /dev/null @@ -1,2391 +0,0 @@ -/* -<:copyright-gpl - - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - -:> -*/ -/************************************************************************** - * File Name : boardparms.c - * - * Description: This file contains the implementation for the BCM63xx board - * parameter access functions. - * - * Updates : 07/14/2003 Created. - ***************************************************************************/ - -/* Includes. */ -#include "boardparms.h" - -/* Defines. */ - -/* Default psi size in K bytes */ -#define BP_PSI_DEFAULT_SIZE 24 - -/* Typedefs */ -typedef struct boardparameters -{ - char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ - ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; - VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; - unsigned short usSdramSize; /* SDRAM size and type */ - unsigned short usPsiSize; /* persistent storage in K bytes */ - unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ - unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ - unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ - unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ - unsigned short usGpioUartRts; /* GPIO pin or not defined */ - unsigned short usGpioUartCts; /* GPIO pin or not defined */ - unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ - unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ - unsigned short usGpioLedWireless; /* GPIO pin or not defined */ - unsigned short usGpioLedUsb; /* GPIO pin or not defined */ - unsigned short usGpioLedHpna; /* GPIO pin or not defined */ - unsigned short usGpioLedWanData; /* GPIO pin or not defined */ - unsigned short usGpioLedPpp; /* GPIO pin or not defined */ - unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ - unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ - unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ - unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ - unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ - unsigned short usExtIntrWireless; /* ext intr or not defined */ - unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ - unsigned short usExtIntrHpna; /* ext intr or not defined */ - unsigned short usCsHpna; /* chip select not defined */ - unsigned short usAntInUseWireless; /* antenna in use or not defined */ - unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ - unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ - unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ -} BOARD_PARAMETERS, *PBOARD_PARAMETERS; - -/* Variables */ -#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -static BOARD_PARAMETERS g_bcm96338sv = -{ - "96338SV", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_NOT_DEFINED, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_NOT_DEFINED, /* usGpioLedWanData */ - BP_NOT_DEFINED, /* usGpioLedPpp */ - BP_NOT_DEFINED, /* usGpioLedPppFail */ - BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ - BP_NOT_DEFINED, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; -static BOARD_PARAMETERS g_bcm96338l2m8m = -{ - "96338L-2M-8M", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_GPIO_2_AL, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_3_AL, /* usGpioLedWanData */ - BP_GPIO_3_AL, /* usGpioLedPpp */ - BP_GPIO_4_AL, /* usGpioLedPppFail */ - BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ - BP_GPIO_1_AL, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; -static PBOARD_PARAMETERS g_BoardParms[] = - {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; -#endif - -#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -static BOARD_PARAMETERS g_bcm96345r = -{ - "96345R", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_GPIO_11_AH, /* usGpioRj11InnerPair */ - BP_GPIO_12_AH, /* usGpioRj11OuterPair */ - BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_GPIO_8_AH, /* usGpioLedAdsl */ - BP_NOT_DEFINED, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_8_AH, /* usGpioLedWanData */ - BP_GPIO_9_AH, /* usGpioLedPpp */ - BP_NOT_DEFINED, /* usGpioLedPppFail */ - BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ - BP_GPIO_10_AH, /* usGpioLedBlAlarm */ - BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ - BP_GPIO_8_AH, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96345gw2 = -{ - /* A hardware jumper determines whether GPIO 13 is used for Press and Hold - * Reset or RTS. - */ - "96345GW2", /* szBoardId */ - {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ - 0x00, /* ucPhyAddress */ - BP_GPIO_0_AH, /* usGpioPhySpiSck */ - BP_GPIO_4_AH, /* usGpioPhySpiSs */ - BP_GPIO_12_AH, /* usGpioPhySpiMosi */ - BP_GPIO_11_AH, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x04, /* numSwitchPorts */ - BP_ENET_CONFIG_GPIO, /* usConfigType */ - BP_ENET_REVERSE_MII}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_DSP, /* ucDspType */ - 0x00, /* ucDspAddress */ - BP_EXT_INTR_1, /* usExtIntrVoip */ - BP_GPIO_6_AH, /* usGpioVoipReset */ - BP_GPIO_15_AH, /* usGpioVoipIntr */ - BP_NOT_DEFINED, /* usGpioLedVoip */ - BP_CS_2}, /* usCsVoip */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ - BP_GPIO_2_AH, /* usGpioPcmciaReset */ - BP_GPIO_13_AH, /* usGpioUartRts */ - BP_GPIO_9_AH, /* usGpioUartCts */ - BP_GPIO_8_AH, /* usGpioLedAdsl */ - BP_NOT_DEFINED, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_GPIO_7_AH, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_8_AH, /* usGpioLedWanData */ - BP_NOT_DEFINED, /* usGpioLedPpp */ - BP_NOT_DEFINED, /* usGpioLedPppFail */ - BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ - BP_GPIO_10_AH, /* usGpioLedBlAlarm */ - BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ - BP_GPIO_8_AH, /* usGpioLedBlStop */ - BP_EXT_INTR_2, /* usExtIntrWireless */ - BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96345gw = -{ - "96345GW", /* szBoardId */ - {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ - 0x00, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x04, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_DSP, /* ucDspType */ - 0x00, /* ucDspAddress */ - BP_EXT_INTR_1, /* usExtIntrVoip */ - BP_GPIO_6_AH, /* usGpioVoipReset */ - BP_GPIO_15_AH, /* usGpioVoipIntr */ - BP_NOT_DEFINED, /* usGpioLedVoip */ - BP_CS_2}, /* usCsVoip */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_GPIO_11_AH, /* usGpioRj11InnerPair */ - BP_GPIO_1_AH, /* usGpioRj11OuterPair */ - BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ - BP_GPIO_2_AH, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_GPIO_8_AH, /* usGpioLedAdsl */ - BP_NOT_DEFINED, /* usGpioLedAdslFail */ - BP_GPIO_10_AH, /* usGpioLedWireless */ - BP_GPIO_7_AH, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_8_AH, /* usGpioLedWanData */ - BP_NOT_DEFINED, /* usGpioLedPpp */ - BP_NOT_DEFINED, /* usGpioLedPppFail */ - BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ - BP_GPIO_9_AH, /* usGpioLedBlAlarm */ - BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ - BP_GPIO_8_AH, /* usGpioLedBlStop */ - BP_EXT_INTR_2, /* usExtIntrWireless */ - BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ - BP_EXT_INTR_3, /* usExtIntrHpna */ - BP_CS_1, /* usCsHpna */ - BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96335r = -{ - "96335R", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_GPIO_9_AH, /* usGpioLedAdsl */ - BP_NOT_DEFINED, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_9_AH, /* usGpioLedWanData */ - BP_GPIO_8_AH, /* usGpioLedPpp */ - BP_NOT_DEFINED, /* usGpioLedPppFail */ - BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ - BP_GPIO_10_AH, /* usGpioLedBlAlarm */ - BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ - BP_GPIO_9_AH, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96345r0 = -{ - "96345R0", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_GPIO_8_AH, /* usGpioLedAdsl */ - BP_NOT_DEFINED, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_9_AH, /* usGpioLedWanData */ - BP_GPIO_9_AH, /* usGpioLedPpp */ - BP_NOT_DEFINED, /* usGpioLedPppFail */ - BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ - BP_GPIO_9_AH, /* usGpioLedBlAlarm */ - BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ - BP_GPIO_8_AH, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96345rs = -{ - "96345RS", /* szBoardId */ - {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ - 0x00, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_GPIO_11_AH, /* usGpioRj11InnerPair */ - BP_GPIO_12_AH, /* usGpioRj11OuterPair */ - BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_GPIO_8_AH, /* usGpioLedAdsl */ - BP_NOT_DEFINED, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_8_AH, /* usGpioLedWanData */ - BP_GPIO_9_AH, /* usGpioLedPpp */ - BP_NOT_DEFINED, /* usGpioLedPppFail */ - BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ - BP_GPIO_10_AH, /* usGpioLedBlAlarm */ - BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ - BP_GPIO_8_AH, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static PBOARD_PARAMETERS g_BoardParms[] = - {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, - &g_bcm96345rs, 0}; -#endif - -#if defined(_BCM96348_) || defined(CONFIG_BCM96348) - -static BOARD_PARAMETERS g_bcm96348r = -{ - "96348R", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_NO_PHY}}, /* ucPhyType */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_GPIO_2_AL, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_3_AL, /* usGpioLedWanData */ - BP_GPIO_3_AL, /* usGpioLedPpp */ - BP_GPIO_4_AL, /* usGpioLedPppFail */ - BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ - BP_GPIO_1_AL, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96348lv = -{ - "96348LV", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ - 0x02, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_GPIO_5_AL, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}}, /* usReverseMii */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_GPIO_2_AL, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_3_AL, /* usGpioLedWanData */ - BP_GPIO_3_AL, /* usGpioLedPpp */ - BP_GPIO_4_AL, /* usGpioLedPppFail */ - BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ - BP_GPIO_1_AL, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96348gw = -{ - "96348GW", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ - 0x00, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x03, /* numSwitchPorts */ - BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ - BP_ENET_REVERSE_MII}}, /* usReverseMii */ - {{BP_VOIP_DSP, /* ucDspType */ - 0x00, /* ucDspAddress */ - BP_EXT_INTR_2, /* usExtIntrVoip */ - BP_GPIO_6_AH, /* usGpioVoipReset */ - BP_GPIO_34_AH, /* usGpioVoipIntr */ - BP_NOT_DEFINED, /* usGpioLedVoip */ - BP_CS_2}, /* usCsVoip */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_GPIO_2_AL, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_3_AL, /* usGpioLedWanData */ - BP_GPIO_3_AL, /* usGpioLedPpp */ - BP_GPIO_4_AL, /* usGpioLedPppFail */ - BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ - BP_GPIO_1_AL, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ -}; - - -static BOARD_PARAMETERS g_bcm96348gw_10 = -{ - "96348GW-10", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ - 0x00, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x03, /* numSwitchPorts */ - BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ - BP_ENET_REVERSE_MII}}, /* usReverseMii */ - {{BP_VOIP_DSP, /* ucDspType */ - 0x00, /* ucDspAddress */ - BP_EXT_INTR_2, /* usExtIntrVoip */ - BP_GPIO_6_AH, /* usGpioVoipReset */ - BP_GPIO_34_AH, /* usGpioVoipIntr */ - BP_NOT_DEFINED, /* usGpioLedVoip */ - BP_CS_2}, /* usCsVoip */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_GPIO_2_AL, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_3_AL, /* usGpioLedWanData */ - BP_GPIO_3_AL, /* usGpioLedPpp */ - BP_GPIO_4_AL, /* usGpioLedPppFail */ - BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ - BP_GPIO_1_AL, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96348gw_11 = -{ - "96348GW-11", /* szBoardId */ - {{BP_ENET_NO_PHY}, /* ucPhyType */ - {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ - 0x00, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x04, /* numSwitchPorts */ - BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ - BP_ENET_REVERSE_MII}}, /* usReverseMii */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_GPIO_2_AL, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_3_AL, /* usGpioLedWanData */ - BP_GPIO_3_AL, /* usGpioLedPpp */ - BP_GPIO_4_AL, /* usGpioLedPppFail */ - BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ - BP_GPIO_1_AL, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static BOARD_PARAMETERS g_bcm96348sv = -{ - "96348SV", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ - 0x1f, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}}, /* usReverseMii */ - {{BP_VOIP_NO_DSP}, /* ucDspType */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_NOT_DEFINED, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_NOT_DEFINED, /* usGpioLedWanData */ - BP_NOT_DEFINED, /* usGpioLedPpp */ - BP_NOT_DEFINED, /* usGpioLedPppFail */ - BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ - BP_NOT_DEFINED, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - - -static BOARD_PARAMETERS g_bcm96348gw_dualDsp = -{ - "96348GW-DualDSP", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ - 0x00, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x03, /* numSwitchPorts */ - BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ - BP_ENET_REVERSE_MII}}, /* usReverseMii */ - {{BP_VOIP_DSP, /* ucDspType */ - 0x00, /* ucDspAddress */ - BP_EXT_INTR_2, /* usExtIntrVoip */ - BP_UNEQUIPPED, /* usGpioVoipReset */ - BP_GPIO_34_AH, /* usGpioVoipIntr */ - BP_NOT_DEFINED, /* usGpioLedVoip */ - BP_CS_2}, /* usCsVoip */ - {BP_VOIP_DSP, /* ucDspType */ - 0x01, /* ucDspAddress */ - BP_EXT_INTR_3, /* usExtIntrVoip */ - BP_UNEQUIPPED , /* usGpioVoipReset */ - BP_GPIO_35_AH, /* usGpioVoipIntr */ - BP_NOT_DEFINED, /* usGpioLedVoip */ - BP_CS_3}}, /* usCsVoip */ - BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_GPIO_2_AL, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_3_AL, /* usGpioLedWanData */ - BP_GPIO_3_AL, /* usGpioLedPpp */ - BP_GPIO_4_AL, /* usGpioLedPppFail */ - BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ - BP_GPIO_1_AL, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - - -static BOARD_PARAMETERS g_bcmCustom_01 = -{ - "BCMCUST_01", /* szBoardId */ - {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ - 0x01, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_MDIO, /* usConfigType */ - BP_NOT_DEFINED}, /* usReverseMii */ - {BP_ENET_NO_PHY, /* ucPhyType */ - 0x00, /* ucPhyAddress */ - BP_NOT_DEFINED, /* usGpioPhySpiSck */ - BP_NOT_DEFINED, /* usGpioPhySpiSs */ - BP_NOT_DEFINED, /* usGpioPhySpiMosi */ - BP_NOT_DEFINED, /* usGpioPhySpiMiso */ - BP_NOT_DEFINED, /* usGpioPhyReset */ - 0x01, /* numSwitchPorts */ - BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ - BP_ENET_REVERSE_MII}}, /* usReverseMii */ - {{BP_VOIP_DSP, /* ucDspType */ - 0x00, /* ucDspAddress */ - BP_EXT_INTR_2, /* usExtIntrVoip */ - BP_GPIO_36_AH, /* usGpioVoipReset */ - BP_GPIO_34_AL, /* usGpioVoipIntr */ - BP_NOT_DEFINED, /* usGpioLedVoip */ - BP_CS_2}, /* usCsVoip */ - {BP_VOIP_NO_DSP}}, /* ucDspType */ - BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ - BP_PSI_DEFAULT_SIZE, /* usPsiSize */ - BP_NOT_DEFINED, /* usGpioRj11InnerPair */ - BP_NOT_DEFINED, /* usGpioRj11OuterPair */ - BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ - BP_NOT_DEFINED, /* usGpioPcmciaReset */ - BP_NOT_DEFINED, /* usGpioUartRts */ - BP_NOT_DEFINED, /* usGpioUartCts */ - BP_NOT_DEFINED, /* usGpioLedAdsl */ - BP_GPIO_2_AL, /* usGpioLedAdslFail */ - BP_NOT_DEFINED, /* usGpioLedWireless */ - BP_NOT_DEFINED, /* usGpioLedUsb */ - BP_NOT_DEFINED, /* usGpioLedHpna */ - BP_GPIO_3_AL, /* usGpioLedWanData */ - BP_GPIO_3_AL, /* usGpioLedPpp */ - BP_GPIO_4_AL, /* usGpioLedPppFail */ - BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ - BP_NOT_DEFINED, /* usGpioLedBlAlarm */ - BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ - BP_GPIO_1_AL, /* usGpioLedBlStop */ - BP_NOT_DEFINED, /* usExtIntrWireless */ - BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ - BP_NOT_DEFINED, /* usExtIntrHpna */ - BP_NOT_DEFINED, /* usCsHpna */ - BP_NOT_DEFINED, /* usAntInUseWireless */ - BP_NOT_DEFINED, /* usGpioSesBtnWireless */ - BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ - BP_NOT_DEFINED /* usGpioLedSesWireless */ -}; - -static PBOARD_PARAMETERS g_BoardParms[] = - {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, - &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, - &g_bcmCustom_01, 0}; -#endif - -static PBOARD_PARAMETERS g_pCurrentBp = 0; - -/************************************************************************** - * Name : bpstrcmp - * - * Description: String compare for this file so it does not depend on an OS. - * (Linux kernel and CFE share this source file.) - * - * Parameters : [IN] dest - destination string - * [IN] src - source string - * - * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src - ***************************************************************************/ -static int bpstrcmp(const char *dest,const char *src); -static int bpstrcmp(const char *dest,const char *src) -{ - while (*src && *dest) - { - if (*dest < *src) return -1; - if (*dest > *src) return 1; - dest++; - src++; - } - - if (*dest && !*src) return 1; - if (!*dest && *src) return -1; - return 0; -} /* bpstrcmp */ - -/************************************************************************** - * Name : BpGetVoipDspConfig - * - * Description: Gets the DSP configuration from the board parameter - * structure for a given DSP index. - * - * Parameters : [IN] dspNum - DSP index (number) - * - * Returns : Pointer to DSP configuration block if found/valid, NULL - * otherwise. - ***************************************************************************/ -VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); -VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) -{ - VOIP_DSP_INFO *pDspConfig = 0; - int i; - - if( g_pCurrentBp ) - { - for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) - { - if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && - g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) - { - pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; - break; - } - } - } - - return pDspConfig; -} - - -/************************************************************************** - * Name : BpSetBoardId - * - * Description: This function find the BOARD_PARAMETERS structure for the - * specified board id string and assigns it to a global, static - * variable. - * - * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not - * have a board parameters configuration record. - ***************************************************************************/ -int BpSetBoardId( char *pszBoardId ) -{ - int nRet = BP_BOARD_ID_NOT_FOUND; - PBOARD_PARAMETERS *ppBp; - - for( ppBp = g_BoardParms; *ppBp; ppBp++ ) - { - if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) - { - g_pCurrentBp = *ppBp; - nRet = BP_SUCCESS; - break; - } - } - - return( nRet ); -} /* BpSetBoardId */ - -/************************************************************************** - * Name : BpGetBoardIds - * - * Description: This function returns all of the supported board id strings. - * - * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id - * strings are returned in. Each id starts at BP_BOARD_ID_LEN - * boundary. - * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that - * were allocated in pszBoardIds. - * - * Returns : Number of board id strings returned. - ***************************************************************************/ -int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) -{ - PBOARD_PARAMETERS *ppBp; - int i; - char *src; - char *dest; - - for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; - i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) - { - dest = pszBoardIds; - src = (*ppBp)->szBoardId; - while( *src ) - *dest++ = *src++; - *dest = '\0'; - } - - return( i ); -} /* BpGetBoardIds */ - -/************************************************************************** - * Name : BpGetEthernetMacInfo - * - * Description: This function returns all of the supported board id strings. - * - * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO - * buffers. - * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that - * are pointed to by pEnetInfos. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) -{ - int i, nRet; - - if( g_pCurrentBp ) - { - for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) - { - if( i < BP_MAX_ENET_MACS ) - { - unsigned char *src = (unsigned char *) - &g_pCurrentBp->EnetMacInfos[i]; - unsigned char *dest = (unsigned char *) pEnetInfos; - int len = sizeof(ETHERNET_MAC_INFO); - while( len-- ) - *dest++ = *src++; - } - else - pEnetInfos->ucPhyType = BP_ENET_NO_PHY; - } - - nRet = BP_SUCCESS; - } - else - { - for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) - pEnetInfos->ucPhyType = BP_ENET_NO_PHY; - - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetEthernetMacInfo */ - -/************************************************************************** - * Name : BpGetSdramSize - * - * Description: This function returns a constant that describees the board's - * SDRAM type and size. - * - * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size - * is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetSdramSize( unsigned long *pulSdramSize ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pulSdramSize = g_pCurrentBp->usSdramSize; - nRet = BP_SUCCESS; - } - else - { - *pulSdramSize = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetSdramSize */ - -/************************************************************************** - * Name : BpGetPsiSize - * - * Description: This function returns the persistent storage size in K bytes. - * - * Parameters : [OUT] pulPsiSize - Address of short word that the persistent - * storage size is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetPsiSize( unsigned long *pulPsiSize ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pulPsiSize = g_pCurrentBp->usPsiSize; - nRet = BP_SUCCESS; - } - else - { - *pulPsiSize = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetPsiSize */ - -/************************************************************************** - * Name : BpGetRj11InnerOuterPairGpios - * - * Description: This function returns the GPIO pin assignments for changing - * between the RJ11 inner pair and RJ11 outer pair. - * - * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair - * GPIO pin is returned in. - * [OUT] pusOuter - Address of short word that the RJ11 outer pair - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, values are returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, - unsigned short *pusOuter ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusInner = g_pCurrentBp->usGpioRj11InnerPair; - *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; - - if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && - g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusInner = *pusOuter = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetRj11InnerOuterPairGpios */ - -/************************************************************************** - * Name : BpGetPressAndHoldResetGpio - * - * Description: This function returns the GPIO pin assignment for the press - * and hold reset button. - * - * Parameters : [OUT] pusValue - Address of short word that the press and hold - * reset button GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; - - if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetPressAndHoldResetGpio */ - -/************************************************************************** - * Name : BpGetVoipResetGpio - * - * Description: This function returns the GPIO pin assignment for the VOIP - * Reset operation. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP reset - * GPIO pin is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); - - if( pDspInfo ) - { - *pusValue = pDspInfo->usGpioVoipReset; - - if( *pusValue != BP_NOT_DEFINED || - *pusValue == BP_UNEQUIPPED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_FOUND; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetVoipResetGpio */ - -/************************************************************************** - * Name : BpGetVoipIntrGpio - * - * Description: This function returns the GPIO pin assignment for VoIP interrupt. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt - * GPIO pin is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); - - if( pDspInfo ) - { - *pusValue = pDspInfo->usGpioVoipIntr; - - if( *pusValue != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_FOUND; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetVoipIntrGpio */ - -/************************************************************************** - * Name : BpGetPcmciaResetGpio - * - * Description: This function returns the GPIO pin assignment for the PCMCIA - * Reset operation. - * - * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPcmciaResetGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioPcmciaReset; - - if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetPcmciaResetGpio */ - -/************************************************************************** - * Name : BpGetUartRtsCtsGpios - * - * Description: This function returns the GPIO pin assignments for RTS and CTS - * UART signals. - * - * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO - * pin is returned in. - * [OUT] pusCts - Address of short word that the UART CTS GPIO - * pin is returned in. - * - * Returns : BP_SUCCESS - Success, values are returned. - * BP_BOARD_ID_NOT_SET - Error, board id input string does not - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusRts = g_pCurrentBp->usGpioUartRts; - *pusCts = g_pCurrentBp->usGpioUartCts; - - if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && - g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusRts = *pusCts = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetUartRtsCtsGpios */ - -/************************************************************************** - * Name : BpGetAdslLedGpio - * - * Description: This function returns the GPIO pin assignment for the ADSL - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the ADSL LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedAdsl; - - if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetAdslLedGpio */ - -/************************************************************************** - * Name : BpGetAdslFailLedGpio - * - * Description: This function returns the GPIO pin assignment for the ADSL - * LED that is used when there is a DSL connection failure. - * - * Parameters : [OUT] pusValue - Address of short word that the ADSL LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslFailLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedAdslFail; - - if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetAdslFailLedGpio */ - -/************************************************************************** - * Name : BpGetWirelessLedGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedWireless; - - if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetWirelessLedGpio */ - -/************************************************************************** - * Name : BpGetWirelessAntInUse - * - * Description: This function returns the antennas in use for wireless - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna - * is in use. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessAntInUse( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usAntInUseWireless; - - if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetWirelessAntInUse */ - -/************************************************************************** - * Name : BpGetWirelessSesBtnGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * Ses Button. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioSesBtnWireless; - - if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetWirelessSesBtnGpio */ - -/************************************************************************** - * Name : BpGetWirelessSesExtIntr - * - * Description: This function returns the external interrupt number for the - * Wireless Ses Button. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses - * external interrup is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesExtIntr( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; - - if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); - -} /* BpGetWirelessSesExtIntr */ - -/************************************************************************** - * Name : BpGetWirelessSesLedGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * Ses Led. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses - * Led GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedSesWireless; - - if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); - -} /* BpGetWirelessSesLedGpio */ - -/************************************************************************** - * Name : BpGetUsbLedGpio - * - * Description: This function returns the GPIO pin assignment for the USB - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the USB LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetUsbLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedUsb; - - if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetUsbLedGpio */ - -/************************************************************************** - * Name : BpGetHpnaLedGpio - * - * Description: This function returns the GPIO pin assignment for the HPNA - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the HPNA LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedHpna; - - if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetHpnaLedGpio */ - -/************************************************************************** - * Name : BpGetWanDataLedGpio - * - * Description: This function returns the GPIO pin assignment for the WAN Data - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWanDataLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedWanData; - - if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetWanDataLedGpio */ - -/************************************************************************** - * Name : BpGetPppLedGpio - * - * Description: This function returns the GPIO pin assignment for the PPP - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the PPP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPppLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedPpp; - - if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetPppLedGpio */ - -/************************************************************************** - * Name : BpGetPppFailLedGpio - * - * Description: This function returns the GPIO pin assignment for the PPP - * LED that is used when there is a PPP connection failure. - * - * Parameters : [OUT] pusValue - Address of short word that the PPP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPppFailLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedPppFail; - - if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetPppFailLedGpio */ - -/************************************************************************** - * Name : BpGetBootloaderPowerOnLedGpio - * - * Description: This function returns the GPIO pin assignment for the power - * on LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the alarm LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; - - if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetBootloaderPowerOn */ - -/************************************************************************** - * Name : BpGetBootloaderAlarmLedGpio - * - * Description: This function returns the GPIO pin assignment for the alarm - * LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the alarm LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedBlAlarm; - - if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetBootloaderAlarmLedGpio */ - -/************************************************************************** - * Name : BpGetBootloaderResetCfgLedGpio - * - * Description: This function returns the GPIO pin assignment for the reset - * configuration LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the reset - * configuration LED GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; - - if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetBootloaderResetCfgLedGpio */ - -/************************************************************************** - * Name : BpGetBootloaderStopLedGpio - * - * Description: This function returns the GPIO pin assignment for the break - * into bootloader LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the break into - * bootloader LED GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pusValue = g_pCurrentBp->usGpioLedBlStop; - - if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetBootloaderStopLedGpio */ - -/************************************************************************** - * Name : BpGetVoipLedGpio - * - * Description: This function returns the GPIO pin assignment for the VOIP - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - * - * Note : The VoIP structure would allow for having one LED per DSP - * however, the board initialization function assumes only one - * LED per functionality (ie one LED for VoIP). Therefore in - * order to keep this tidy and simple we do not make usage of the - * one-LED-per-DSP function. Instead, we assume that the LED for - * VoIP is unique and associated with DSP 0 (always present on - * any VoIP platform). If changing this to a LED-per-DSP function - * then one need to update the board initialization driver in - * bcmdrivers\opensource\char\board\bcm963xx\impl1 - ***************************************************************************/ -int BpGetVoipLedGpio( unsigned short *pusValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); - - if( pDspInfo ) - { - *pusValue = pDspInfo->usGpioLedVoip; - - if( *pusValue != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_FOUND; - } - } - else - { - *pusValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetVoipLedGpio */ - -/************************************************************************** - * Name : BpGetWirelessExtIntr - * - * Description: This function returns the Wireless external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the wireless - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessExtIntr( unsigned long *pulValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pulValue = g_pCurrentBp->usExtIntrWireless; - - if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pulValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetWirelessExtIntr */ - -/************************************************************************** - * Name : BpGetAdslDyingGaspExtIntr - * - * Description: This function returns the ADSL Dying Gasp external interrupt - * number. - * - * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; - - if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pulValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetAdslDyingGaspExtIntr */ - -/************************************************************************** - * Name : BpGetVoipExtIntr - * - * Description: This function returns the VOIP external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the VOIP - * external interrupt number is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); - - if( pDspInfo ) - { - *pulValue = pDspInfo->usExtIntrVoip; - - if( *pulValue != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pulValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_FOUND; - } - } - else - { - *pulValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetVoipExtIntr */ - -/************************************************************************** - * Name : BpGetHpnaExtIntr - * - * Description: This function returns the HPNA external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the HPNA - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaExtIntr( unsigned long *pulValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pulValue = g_pCurrentBp->usExtIntrHpna; - - if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pulValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetHpnaExtIntr */ - -/************************************************************************** - * Name : BpGetHpnaChipSelect - * - * Description: This function returns the HPNA chip select number. - * - * Parameters : [OUT] pulValue - Address of short word that the HPNA - * chip select number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaChipSelect( unsigned long *pulValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - *pulValue = g_pCurrentBp->usCsHpna; - - if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pulValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetHpnaChipSelect */ - -/************************************************************************** - * Name : BpGetVoipChipSelect - * - * Description: This function returns the VOIP chip select number. - * - * Parameters : [OUT] pulValue - Address of short word that the VOIP - * chip select number is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) -{ - int nRet; - - if( g_pCurrentBp ) - { - VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); - - if( pDspInfo ) - { - *pulValue = pDspInfo->usCsVoip; - - if( *pulValue != BP_NOT_DEFINED ) - { - nRet = BP_SUCCESS; - } - else - { - nRet = BP_VALUE_NOT_DEFINED; - } - } - else - { - *pulValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_FOUND; - } - } - else - { - *pulValue = BP_NOT_DEFINED; - nRet = BP_BOARD_ID_NOT_SET; - } - - return( nRet ); -} /* BpGetVoipChipSelect */ - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h deleted file mode 100644 index 08ba24cca3..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h +++ /dev/null @@ -1,758 +0,0 @@ -/* -<:copyright-gpl - - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - -:> -*/ -/************************************************************************** - * File Name : boardparms.h - * - * Description: This file contains definitions and function prototypes for - * the BCM63xx board parameter access functions. - * - * Updates : 07/14/2003 Created. - ***************************************************************************/ - -#if !defined(_BOARDPARMS_H) -#define _BOARDPARMS_H - -/* Return codes. */ -#define BP_SUCCESS 0 -#define BP_BOARD_ID_NOT_FOUND 1 -#define BP_VALUE_NOT_DEFINED 2 -#define BP_BOARD_ID_NOT_SET 3 - -/* Values for BpGetSdramSize. */ -#define BP_MEMORY_8MB_1_CHIP 0 -#define BP_MEMORY_16MB_1_CHIP 1 -#define BP_MEMORY_32MB_1_CHIP 2 -#define BP_MEMORY_64MB_2_CHIP 3 -#define BP_MEMORY_32MB_2_CHIP 4 -#define BP_MEMORY_16MB_2_CHIP 5 - -/* Values for EthernetMacInfo PhyType. */ -#define BP_ENET_NO_PHY 0 -#define BP_ENET_INTERNAL_PHY 1 -#define BP_ENET_EXTERNAL_PHY 2 -#define BP_ENET_EXTERNAL_SWITCH 3 - -/* Values for EthernetMacInfo Configuration type. */ -#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ -#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ -#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ -#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ -#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ -#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ -#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ - -/* Values for EthernetMacInfo Reverse MII. */ -#define BP_ENET_NO_REVERSE_MII 0 -#define BP_ENET_REVERSE_MII 1 - -/* Values for VoIPDSPInfo DSPType. */ -#define BP_VOIP_NO_DSP 0 -#define BP_VOIP_DSP 1 - - -/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ -#define BP_ACTIVE_MASK 0x8000 -#define BP_ACTIVE_HIGH 0x0000 -#define BP_ACTIVE_LOW 0x8000 -#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) -#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) -#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) -#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) -#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) -#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) -#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) -#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) -#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) -#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) -#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) -#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) -#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) -#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) -#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) -#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) -#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) -#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) -#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) -#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) -#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) -#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) -#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) -#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) -#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) -#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) -#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) -#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) -#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) -#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) -#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) -#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) -#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) -#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) -#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) -#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) -#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) -#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) -#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) -#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) -#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) -#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) -#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) -#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) -#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) -#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) -#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) -#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) -#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) -#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) -#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) -#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) -#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) -#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) -#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) -#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) -#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) -#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) -#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) -#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) -#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) -#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) -#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) -#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) -#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) -#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) -#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) -#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) -#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) -#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) -#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) -#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) -#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) -#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) - -/* Values for external interrupt assignments. */ -#define BP_EXT_INTR_0 0 -#define BP_EXT_INTR_1 1 -#define BP_EXT_INTR_2 2 -#define BP_EXT_INTR_3 3 - -/* Values for chip select assignments. */ -#define BP_CS_0 0 -#define BP_CS_1 1 -#define BP_CS_2 2 -#define BP_CS_3 3 - -/* Value for GPIO and external interrupt fields that are not used. */ -#define BP_NOT_DEFINED 0xffff -#define BP_HW_DEFINED 0xfff0 -#define BP_UNEQUIPPED 0xfff1 - -/* Maximum size of the board id string. */ -#define BP_BOARD_ID_LEN 16 - -/* Maximum number of Ethernet MACs. */ -#define BP_MAX_ENET_MACS 2 - -/* Maximum number of VoIP DSPs. */ -#define BP_MAX_VOIP_DSP 2 - -/* Wireless Antenna Settings. */ -#define BP_WLAN_ANT_MAIN 0 -#define BP_WLAN_ANT_AUX 1 -#define BP_WLAN_ANT_BOTH 3 - -#if !defined(__ASSEMBLER__) - -/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, - * then the other fields are not valid. - */ -typedef struct EthernetMacInfo -{ - unsigned char ucPhyType; /* BP_ENET_xxx */ - unsigned char ucPhyAddress; /* 0 to 31 */ - unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ - unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ - unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ - unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ - unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ - unsigned short numSwitchPorts; /* Number of PHY ports */ - unsigned short usConfigType; /* Configuration type */ - unsigned short usReverseMii; /* Reverse MII */ -} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; - - -/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, - * then the other fields are not valid. - */ -typedef struct VoIPDspInfo -{ - unsigned char ucDspType; - unsigned char ucDspAddress; - unsigned short usExtIntrVoip; - unsigned short usGpioVoipReset; - unsigned short usGpioVoipIntr; - unsigned short usGpioLedVoip; - unsigned short usCsVoip; - -} VOIP_DSP_INFO; - - -/************************************************************************** - * Name : BpSetBoardId - * - * Description: This function find the BOARD_PARAMETERS structure for the - * specified board id string and assigns it to a global, static - * variable. - * - * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not - * have a board parameters configuration record. - ***************************************************************************/ -int BpSetBoardId( char *pszBoardId ); - -/************************************************************************** - * Name : BpGetBoardIds - * - * Description: This function returns all of the supported board id strings. - * - * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id - * strings are returned in. Each id starts at BP_BOARD_ID_LEN - * boundary. - * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that - * were allocated in pszBoardIds. - * - * Returns : Number of board id strings returned. - ***************************************************************************/ -int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); - -/************************************************************************** - * Name : BpGetEthernetMacInfo - * - * Description: This function returns all of the supported board id strings. - * - * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO - * buffers. - * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that - * are pointed to by pEnetInfos. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); - -/************************************************************************** - * Name : BpGetSdramSize - * - * Description: This function returns a constant that describees the board's - * SDRAM type and size. - * - * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size - * is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetSdramSize( unsigned long *pulSdramSize ); - -/************************************************************************** - * Name : BpGetPsiSize - * - * Description: This function returns the persistent storage size in K bytes. - * - * Parameters : [OUT] pulPsiSize - Address of short word that the persistent - * storage size is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetPsiSize( unsigned long *pulPsiSize ); - -/************************************************************************** - * Name : BpGetRj11InnerOuterPairGpios - * - * Description: This function returns the GPIO pin assignments for changing - * between the RJ11 inner pair and RJ11 outer pair. - * - * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair - * GPIO pin is returned in. - * [OUT] pusOuter - Address of short word that the RJ11 outer pair - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, values are returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, - unsigned short *pusOuter ); - -/************************************************************************** - * Name : BpGetPressAndHoldResetGpio - * - * Description: This function returns the GPIO pin assignment for the press - * and hold reset button. - * - * Parameters : [OUT] pusValue - Address of short word that the press and hold - * reset button GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetVoipResetGpio - * - * Description: This function returns the GPIO pin assignment for the VOIP - * Reset operation. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP reset - * GPIO pin is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetVoipIntrGpio - * - * Description: This function returns the GPIO pin assignment for VoIP interrupt. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt - * GPIO pin is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetPcmciaResetGpio - * - * Description: This function returns the GPIO pin assignment for the PCMCIA - * Reset operation. - * - * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPcmciaResetGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetUartRtsCtsGpios - * - * Description: This function returns the GPIO pin assignments for RTS and CTS - * UART signals. - * - * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO - * pin is returned in. - * [OUT] pusCts - Address of short word that the UART CTS GPIO - * pin is returned in. - * - * Returns : BP_SUCCESS - Success, values are returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); - -/************************************************************************** - * Name : BpGetAdslLedGpio - * - * Description: This function returns the GPIO pin assignment for the ADSL - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the ADSL LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetAdslFailLedGpio - * - * Description: This function returns the GPIO pin assignment for the ADSL - * LED that is used when there is a DSL connection failure. - * - * Parameters : [OUT] pusValue - Address of short word that the ADSL LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslFailLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessLedGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessAntInUse - * - * Description: This function returns the antennas in use for wireless - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna - * is in use. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessAntInUse( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessSesBtnGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * Ses Button. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses - * Button GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessSesExtIntr - * - * Description: This function returns the external interrupt number for the - * Wireless Ses Button. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses - * external interrup is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesExtIntr( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessSesLedGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * Ses Led. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses - * Led GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetUsbLedGpio - * - * Description: This function returns the GPIO pin assignment for the USB - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the USB LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetUsbLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetHpnaLedGpio - * - * Description: This function returns the GPIO pin assignment for the HPNA - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the HPNA LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWanDataLedGpio - * - * Description: This function returns the GPIO pin assignment for the WAN Data - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWanDataLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetPppLedGpio - * - * Description: This function returns the GPIO pin assignment for the PPP - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the PPP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPppLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetPppFailLedGpio - * - * Description: This function returns the GPIO pin assignment for the PPP - * LED that is used when there is a PPP connection failure. - * - * Parameters : [OUT] pusValue - Address of short word that the PPP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPppFailLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetVoipLedGpio - * - * Description: This function returns the GPIO pin assignment for the VOIP - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetBootloaderPowerOnLedGpio - * - * Description: This function returns the GPIO pin assignment for the power - * on LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the alarm LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetBootloaderAlarmLedGpio - * - * Description: This function returns the GPIO pin assignment for the alarm - * LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the alarm LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetBootloaderResetCfgLedGpio - * - * Description: This function returns the GPIO pin assignment for the reset - * configuration LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the reset - * configuration LED GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetBootloaderStopLedGpio - * - * Description: This function returns the GPIO pin assignment for the break - * into bootloader LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the break into - * bootloader LED GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessExtIntr - * - * Description: This function returns the Wireless external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the wireless - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessExtIntr( unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetAdslDyingGaspExtIntr - * - * Description: This function returns the ADSL Dying Gasp external interrupt - * number. - * - * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetVoipExtIntr - * - * Description: This function returns the VOIP external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the VOIP - * external interrupt number is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetHpnaExtIntr - * - * Description: This function returns the HPNA external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the HPNA - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaExtIntr( unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetHpnaChipSelect - * - * Description: This function returns the HPNA chip select number. - * - * Parameters : [OUT] pulValue - Address of short word that the HPNA - * chip select number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaChipSelect( unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetVoipChipSelect - * - * Description: This function returns the VOIP chip select number. - * - * Parameters : [OUT] pulValue - Address of short word that the VOIP - * chip select number is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); - -#endif /* __ASSEMBLER__ */ - -#endif /* _BOARDPARMS_H */ - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h deleted file mode 100644 index 3a6e00a2ae..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_intr.h +++ /dev/null @@ -1,64 +0,0 @@ -/* -<:copyright-gpl - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __6338_INTR_H -#define __6338_INTR_H - -/*=====================================================================*/ -/* BCM6338 External Interrupt Level Assignments */ -/*=====================================================================*/ -#define INTERRUPT_ID_EXTERNAL_0 3 -#define INTERRUPT_ID_EXTERNAL_1 4 -#define INTERRUPT_ID_EXTERNAL_2 5 -#define INTERRUPT_ID_EXTERNAL_3 6 - -/*=====================================================================*/ -/* BCM6338 Timer Interrupt Level Assignments */ -/*=====================================================================*/ -#define MIPS_TIMER_INT 7 - -/*=====================================================================*/ -/* Peripheral ISR Table Offset */ -/*=====================================================================*/ -#define INTERNAL_ISR_TABLE_OFFSET 8 - -/*=====================================================================*/ -/* Logical Peripheral Interrupt IDs */ -/*=====================================================================*/ - -#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) -#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) -#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) -#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) -#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) -#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) -#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) -#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) -#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) - -#endif /* __BCM6338_H */ - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h deleted file mode 100644 index 70bf807342..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6338_map_part.h +++ /dev/null @@ -1,334 +0,0 @@ -/* -<:copyright-gpl - Copyright 2004 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM6338_MAP_H -#define __BCM6338_MAP_H - -#include "bcmtypes.h" - -#define PERF_BASE 0xfffe0000 -#define TIMR_BASE 0xfffe0200 -#define UART_BASE 0xfffe0300 -#define GPIO_BASE 0xfffe0400 -#define SPI_BASE 0xfffe0c00 - -typedef struct PerfControl { - uint32 RevID; - uint16 testControl; - uint16 blkEnables; -#define EMAC_CLK_EN 0x0010 -#define USBS_CLK_EN 0x0010 -#define SAR_CLK_EN 0x0020 - -#define SPI_CLK_EN 0x0200 - - uint32 pll_control; -#define SOFT_RESET 0x00000001 - - uint32 IrqMask; - uint32 IrqStatus; - - uint32 ExtIrqCfg; -#define EI_SENSE_SHFT 0 -#define EI_STATUS_SHFT 5 -#define EI_CLEAR_SHFT 10 -#define EI_MASK_SHFT 15 -#define EI_INSENS_SHFT 20 -#define EI_LEVEL_SHFT 25 - - uint32 unused[4]; /* (18) */ - uint32 BlockSoftReset; /* (28) */ -#define BSR_SPI 0x00000001 -#define BSR_EMAC 0x00000004 -#define BSR_USBH 0x00000008 -#define BSR_USBS 0x00000010 -#define BSR_ADSL 0x00000020 -#define BSR_DMAMEM 0x00000040 -#define BSR_SAR 0x00000080 -#define BSR_ACLC 0x00000100 -#define BSR_ADSL_MIPS_PLL 0x00000400 -#define BSR_ALL_BLOCKS \ - (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ - BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -} PerfControl; - -#define PERF ((volatile PerfControl * const) PERF_BASE) - - -typedef struct Timer { - uint16 unused0; - byte TimerMask; -#define TIMER0EN 0x01 -#define TIMER1EN 0x02 -#define TIMER2EN 0x04 - byte TimerInts; -#define TIMER0 0x01 -#define TIMER1 0x02 -#define TIMER2 0x04 -#define WATCHDOG 0x08 - uint32 TimerCtl0; - uint32 TimerCtl1; - uint32 TimerCtl2; -#define TIMERENABLE 0x80000000 -#define RSTCNTCLR 0x40000000 - uint32 TimerCnt0; - uint32 TimerCnt1; - uint32 TimerCnt2; - uint32 WatchDogDefCount; - - /* Write 0xff00 0x00ff to Start timer - * Write 0xee00 0x00ee to Stop and re-load default count - * Read from this register returns current watch dog count - */ - uint32 WatchDogCtl; - - /* Number of 40-MHz ticks for WD Reset pulse to last */ - uint32 WDResetCount; -} Timer; - -#define TIMER ((volatile Timer * const) TIMR_BASE) -typedef struct UartChannel { - byte unused0; - byte control; -#define BRGEN 0x80 /* Control register bit defs */ -#define TXEN 0x40 -#define RXEN 0x20 -#define LOOPBK 0x10 -#define TXPARITYEN 0x08 -#define TXPARITYEVEN 0x04 -#define RXPARITYEN 0x02 -#define RXPARITYEVEN 0x01 - - byte config; -#define XMITBREAK 0x40 -#define BITS5SYM 0x00 -#define BITS6SYM 0x10 -#define BITS7SYM 0x20 -#define BITS8SYM 0x30 -#define ONESTOP 0x07 -#define TWOSTOP 0x0f - /* 4-LSBS represent STOP bits/char - * in 1/8 bit-time intervals. Zero - * represents 1/8 stop bit interval. - * Fifteen represents 2 stop bits. - */ - byte fifoctl; -#define RSTTXFIFOS 0x80 -#define RSTRXFIFOS 0x40 - /* 5-bit TimeoutCnt is in low bits of this register. - * This count represents the number of characters - * idle times before setting receive Irq when below threshold - */ - uint32 baudword; - /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate - */ - - byte txf_levl; /* Read-only fifo depth */ - byte rxf_levl; /* Read-only fifo depth */ - byte fifocfg; /* Upper 4-bits are TxThresh, Lower are - * RxThreshold. Irq can be asserted - * when rx fifo> thresh, txfifo -*/ - -#ifndef __6345_INTR_H -#define __6345_INTR_H - - -/*=====================================================================*/ -/* BCM6345 External Interrupt Level Assignments */ -/*=====================================================================*/ -#define INTERRUPT_ID_EXTERNAL_0 3 -#define INTERRUPT_ID_EXTERNAL_1 4 -#define INTERRUPT_ID_EXTERNAL_2 5 -#define INTERRUPT_ID_EXTERNAL_3 6 - -/*=====================================================================*/ -/* BCM6345 Timer Interrupt Level Assignments */ -/*=====================================================================*/ -#define MIPS_TIMER_INT 7 - -/*=====================================================================*/ -/* Peripheral ISR Table Offset */ -/*=====================================================================*/ -#define INTERNAL_ISR_TABLE_OFFSET 8 -#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) - -/*=====================================================================*/ -/* Logical Peripheral Interrupt IDs */ -/*=====================================================================*/ - -/* Internal peripheral interrupt IDs */ -#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) -#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) -#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) -#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) -#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) - -/* DMA channel interrupt IDs */ -#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) -#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) -#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) -#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) -#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) -#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) -#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) -#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) -#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) -#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) -#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) -#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) - - -#endif /* __BCM6345_H */ - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h deleted file mode 100644 index 78e59a4399..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6345_map_part.h +++ /dev/null @@ -1,163 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM6345_MAP_H -#define __BCM6345_MAP_H - - -#include "bcmtypes.h" -#include "6345_intr.h" - -typedef struct IntControl { - uint32 RevID; - uint16 testControl; - uint16 blkEnables; -#define USB_CLK_EN 0x0100 -#define EMAC_CLK_EN 0x0080 -#define UART_CLK_EN 0x0008 -#define CPU_CLK_EN 0x0001 - - uint32 pll_control; -#define SOFT_RESET 0x00000001 - - uint32 IrqMask; - uint32 IrqStatus; - - uint32 ExtIrqCfg; -#define EI_SENSE_SHFT 0 -#define EI_STATUS_SHFT 4 -#define EI_CLEAR_SHFT 8 -#define EI_MASK_SHFT 12 -#define EI_INSENS_SHFT 16 -#define EI_LEVEL_SHFT 20 -} IntControl; - -#define INTC_BASE 0xfffe0000 -#define PERF ((volatile IntControl * const) INTC_BASE) - -#define TIMR_BASE 0xfffe0200 -typedef struct Timer { - uint16 unused0; - byte TimerMask; -#define TIMER0EN 0x01 -#define TIMER1EN 0x02 -#define TIMER2EN 0x04 - byte TimerInts; -#define TIMER0 0x01 -#define TIMER1 0x02 -#define TIMER2 0x04 -#define WATCHDOG 0x08 - uint32 TimerCtl0; - uint32 TimerCtl1; - uint32 TimerCtl2; -#define TIMERENABLE 0x80000000 -#define RSTCNTCLR 0x40000000 - uint32 TimerCnt0; - uint32 TimerCnt1; - uint32 TimerCnt2; - uint32 WatchDogDefCount; - - /* Write 0xff00 0x00ff to Start timer - * Write 0xee00 0x00ee to Stop and re-load default count - * Read from this register returns current watch dog count - */ - uint32 WatchDogCtl; - - /* Number of 40-MHz ticks for WD Reset pulse to last */ - uint32 WDResetCount; -} Timer; - -#define TIMER ((volatile Timer * const) TIMR_BASE) - -typedef struct UartChannel { - byte unused0; - byte control; -#define BRGEN 0x80 /* Control register bit defs */ -#define TXEN 0x40 -#define RXEN 0x20 -#define TXPARITYEN 0x08 -#define TXPARITYEVEN 0x04 -#define RXPARITYEN 0x02 -#define RXPARITYEVEN 0x01 - byte config; -#define BITS5SYM 0x00 -#define BITS6SYM 0x10 -#define BITS7SYM 0x20 -#define BITS8SYM 0x30 -#define XMITBREAK 0x40 -#define ONESTOP 0x07 -#define TWOSTOP 0x0f - - byte fifoctl; -#define RSTTXFIFOS 0x80 -#define RSTRXFIFOS 0x40 - uint32 baudword; - - byte txf_levl; - byte rxf_levl; - byte fifocfg; - byte prog_out; - - byte unused1; - byte DeltaIPEdgeNoSense; - byte DeltaIPConfig_Mask; - byte DeltaIP_SyncIP; - uint16 intMask; - uint16 intStatus; -#define TXUNDERR 0x0002 -#define TXOVFERR 0x0004 -#define TXFIFOEMT 0x0020 -#define RXOVFERR 0x0080 -#define RXFIFONE 0x0800 -#define RXFRAMERR 0x1000 -#define RXPARERR 0x2000 -#define RXBRK 0x4000 - - uint16 unused2; - uint16 Data; - uint32 unused3; - uint32 unused4; -} Uart; - -#define UART_BASE 0xfffe0300 -#define UART ((volatile Uart * const) UART_BASE) - -typedef struct GpioControl { - uint16 unused0; - byte unused1; - byte TBusSel; - - uint16 unused2; - uint16 GPIODir; - byte unused3; - byte Leds; - uint16 GPIOio; - - uint32 UartCtl; -} GpioControl; - -#define GPIO_BASE 0xfffe0400 -#define GPIO ((volatile GpioControl * const) GPIO_BASE) - -#define GPIO_NUM_MAX_BITS_MASK 0x0f -#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) - - -#endif - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h deleted file mode 100644 index da3ee9fc34..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_intr.h +++ /dev/null @@ -1,74 +0,0 @@ -/* -<:copyright-gpl - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __6348_INTR_H -#define __6348_INTR_H - - -/*=====================================================================*/ -/* BCM6348 External Interrupt Level Assignments */ -/*=====================================================================*/ -#define INTERRUPT_ID_EXTERNAL_0 3 -#define INTERRUPT_ID_EXTERNAL_1 4 -#define INTERRUPT_ID_EXTERNAL_2 5 -#define INTERRUPT_ID_EXTERNAL_3 6 - -/*=====================================================================*/ -/* BCM6348 Timer Interrupt Level Assignments */ -/*=====================================================================*/ -#define MIPS_TIMER_INT 7 - -/*=====================================================================*/ -/* Peripheral ISR Table Offset */ -/*=====================================================================*/ -#define INTERNAL_ISR_TABLE_OFFSET 8 - -/*=====================================================================*/ -/* Logical Peripheral Interrupt IDs */ -/*=====================================================================*/ - -#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) -#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) -#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) -#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) -#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) -#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) -#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) -#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) -#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) -#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) -#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) -#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) -#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) -#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) -#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) -#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) -#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) - - -#endif /* __BCM6348_H */ - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h deleted file mode 100644 index 199ef9e15e..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/6348_map_part.h +++ /dev/null @@ -1,500 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM6348_MAP_H -#define __BCM6348_MAP_H - -#include "bcmtypes.h" - -#define PERF_BASE 0xfffe0000 -#define TIMR_BASE 0xfffe0200 -#define UART_BASE 0xfffe0300 -#define GPIO_BASE 0xfffe0400 -#define MPI_BASE 0xfffe2000 /* MPI control registers */ -#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ -#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ - -typedef struct PerfControl { - uint32 RevID; - uint16 testControl; - uint16 blkEnables; -#define EMAC_CLK_EN 0x0010 -#define SAR_CLK_EN 0x0020 -#define USBS_CLK_EN 0x0040 -#define USBH_CLK_EN 0x0100 - - uint32 pll_control; -#define SOFT_RESET 0x00000001 - - uint32 IrqMask; - uint32 IrqStatus; - - uint32 ExtIrqCfg; -#define EI_SENSE_SHFT 0 -#define EI_STATUS_SHFT 5 -#define EI_CLEAR_SHFT 10 -#define EI_MASK_SHFT 15 -#define EI_INSENS_SHFT 20 -#define EI_LEVEL_SHFT 25 - - uint32 unused[4]; /* (18) */ - uint32 BlockSoftReset; /* (28) */ -#define BSR_SPI 0x00000001 -#define BSR_EMAC 0x00000004 -#define BSR_USBH 0x00000008 -#define BSR_USBS 0x00000010 -#define BSR_ADSL 0x00000020 -#define BSR_DMAMEM 0x00000040 -#define BSR_SAR 0x00000080 -#define BSR_ACLC 0x00000100 -#define BSR_ADSL_MIPS_PLL 0x00000400 -#define BSR_ALL_BLOCKS \ - (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ - BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) - uint32 unused2[2]; /* (2c) */ - uint32 PllStrap; /* (34) */ -#define PLL_N1_SHFT 20 -#define PLL_N1_MASK (7< thresh, txfifo= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) - - -/* -** External Bus Interface -*/ -typedef struct EbiChipSelect { - uint32 base; /* base address in upper 24 bits */ -#define EBI_SIZE_8K 0 -#define EBI_SIZE_16K 1 -#define EBI_SIZE_32K 2 -#define EBI_SIZE_64K 3 -#define EBI_SIZE_128K 4 -#define EBI_SIZE_256K 5 -#define EBI_SIZE_512K 6 -#define EBI_SIZE_1M 7 -#define EBI_SIZE_2M 8 -#define EBI_SIZE_4M 9 -#define EBI_SIZE_8M 10 -#define EBI_SIZE_16M 11 -#define EBI_SIZE_32M 12 -#define EBI_SIZE_64M 13 -#define EBI_SIZE_128M 14 -#define EBI_SIZE_256M 15 - uint32 config; -#define EBI_ENABLE 0x00000001 /* .. enable this range */ -#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -#define EBI_WREN 0x00000020 /* enable posted writes */ -#define EBI_POLARITY 0x00000040 /* .. set to invert something, - ** don't know what yet */ -#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -#define EBI_FIFO 0x00000200 /* .. use fifo */ -#define EBI_RE 0x00000400 /* .. Reverse Endian */ -} EbiChipSelect; - -typedef struct MpiRegisters { - EbiChipSelect cs[7]; /* size chip select configuration */ -#define EBI_CS0_BASE 0 -#define EBI_CS1_BASE 1 -#define EBI_CS2_BASE 2 -#define EBI_CS3_BASE 3 -#define PCMCIA_COMMON_BASE 4 -#define PCMCIA_ATTRIBUTE_BASE 5 -#define PCMCIA_IO_BASE 6 - uint32 unused0[2]; /* reserved */ - uint32 ebi_control; /* ebi control */ - uint32 unused1[4]; /* reserved */ -#define EBI_ACCESS_TIMEOUT 0x000007FF - uint32 pcmcia_cntl1; /* pcmcia control 1 */ -#define PCCARD_CARD_RESET 0x00040000 -#define CARDBUS_ENABLE 0x00008000 -#define PCMCIA_ENABLE 0x00004000 -#define PCMCIA_GPIO_ENABLE 0x00002000 -#define CARDBUS_IDSEL 0x00001F00 -#define VS2_OEN 0x00000080 -#define VS1_OEN 0x00000040 -#define VS2_OUT 0x00000020 -#define VS1_OUT 0x00000010 -#define VS2_IN 0x00000008 -#define VS1_IN 0x00000004 -#define CD2_IN 0x00000002 -#define CD1_IN 0x00000001 -#define VS_MASK 0x0000000C -#define CD_MASK 0x00000003 - uint32 unused2; /* reserved */ - uint32 pcmcia_cntl2; /* pcmcia control 2 */ -#define PCMCIA_BYTESWAP_DIS 0x00000002 -#define PCMCIA_HALFWORD_EN 0x00000001 -#define RW_ACTIVE_CNT_BIT 2 -#define INACTIVE_CNT_BIT 8 -#define CE_SETUP_CNT_BIT 16 -#define CE_HOLD_CNT_BIT 24 - uint32 unused3[40]; /* reserved */ - - uint32 sp0range; /* PCI to internal system bus address space */ - uint32 sp0remap; - uint32 sp0cfg; - uint32 sp1range; - uint32 sp1remap; - uint32 sp1cfg; - - uint32 EndianCfg; - - uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ -#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ -#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ -#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ -#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ -#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ -#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ - - uint32 l2pmrange1; /* internal system bus to PCI memory space */ -#define PCI_SIZE_64K 0xFFFF0000 -#define PCI_SIZE_128K 0xFFFE0000 -#define PCI_SIZE_256K 0xFFFC0000 -#define PCI_SIZE_512K 0xFFF80000 -#define PCI_SIZE_1M 0xFFF00000 -#define PCI_SIZE_2M 0xFFE00000 -#define PCI_SIZE_4M 0xFFC00000 -#define PCI_SIZE_8M 0xFF800000 -#define PCI_SIZE_16M 0xFF000000 -#define PCI_SIZE_32M 0xFE000000 - uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ - uint32 l2pmremap1; -#define CARDBUS_MEM 0x00000004 -#define MEM_WINDOW_EN 0x00000001 - uint32 l2pmrange2; - uint32 l2pmbase2; - uint32 l2pmremap2; - uint32 l2piorange; /* internal system bus to PCI I/O space */ - uint32 l2piobase; - uint32 l2pioremap; - - uint32 pcimodesel; -#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 -#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ -#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ - - uint32 pciintstat; /* PCI interrupt mask/status */ -#define MAILBOX1_SENT 0x08 -#define MAILBOX0_SENT 0x04 -#define MAILBOX1_MSG_RCV 0x02 -#define MAILBOX0_MSG_RCV 0x01 - uint32 locbuscntrl; /* internal system bus control */ -#define DIR_U2P_NOSWAP 0x00000002 -#define EN_PCI_GPIO 0x00000001 - uint32 locintstat; /* internal system bus interrupt mask/status */ -#define CSERR 0x0200 -#define SERR 0x0100 -#define EXT_PCI_INT 0x0080 -#define DIR_FAILED 0x0040 -#define DIR_COMPLETE 0x0020 -#define PCI_CFG 0x0010 - uint32 unused5[7]; - - uint32 mailbox0; - uint32 mailbox1; - - uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ -#define PCI_CFG_REG_WRITE_EN 0x00000080 -#define PCI_CFG_ADDR 0x0000003C - uint32 pcicfgdata; /* internal system bus PCI configuration data */ - - uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ -#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ -#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ -#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ -#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ - uint32 locch2intStat; -#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ -#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ -#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ - uint32 locch2intMask; - uint32 unused6; - uint32 locch2descaddr; - uint32 locch2status1; -#define LOCAL_DESC_STATE 0xE0000000 -#define PCI_DESC_STATE 0x1C000000 -#define BYTE_DONE 0x03FFC000 -#define RING_ADDR 0x00003FFF - uint32 locch2status2; -#define BUFPTR_OFFSET 0x1FFF0000 -#define PCI_MASTER_STATE 0x000000C0 -#define LOC_MASTER_STATE 0x00000038 -#define CONTROL_STATE 0x00000007 - uint32 unused7; - - uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ -#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ -#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ - uint32 locch1intstat; - uint32 locch1intmask; - uint32 unused8; - uint32 locch1descaddr; - uint32 locch1status1; - uint32 locch1status2; - uint32 unused9; - - uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ - uint32 pcich1intstat; - uint32 pcich1intmask; - uint32 pcich1descaddr; - uint32 pcich1status1; - uint32 pcich1status2; - - uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ - uint32 pcich2intstat; - uint32 pcich2intmask; - uint32 pcich2descaddr; - uint32 pcich2status1; - uint32 pcich2status2; - - uint32 perm_id; /* permanent device and vendor id */ - uint32 perm_rev; /* permanent revision id */ -} MpiRegisters; - -#define MPI ((volatile MpiRegisters * const) MPI_BASE) - -/* PCI configuration address space start offset 0x40 */ -#define BRCM_PCI_CONFIG_TIMER 0x40 -#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 -#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF - -/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ -#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ -#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ - -#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) - -#endif - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h deleted file mode 100644 index e902e96aa3..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmTag.h +++ /dev/null @@ -1,153 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ -//************************************************************************************** -// File Name : bcmTag.h -// -// Description: add tag with validation system to the firmware image file to be uploaded -// via http -// -// Created : 02/28/2002 seanl -//************************************************************************************** - -#ifndef _BCMTAG_H_ -#define _BCMTAG_H_ - - -#define BCM_SIG_1 "Broadcom Corporation" -#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. - -#define BCM_TAG_VER "6" -#define BCM_TAG_VER_LAST "26" - -// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars -#define TAG_LEN 256 -#define TAG_VER_LEN 4 -#define SIG_LEN 20 -#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID -#define CHIP_ID_LEN 6 -#define IMAGE_LEN 10 -#define ADDRESS_LEN 12 -#define FLAG_LEN 2 -#define TOKEN_LEN 20 -#define BOARD_ID_LEN 16 -#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ - (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) - - -// TAG for downloadable image (kernel plus file system) -typedef struct _FILE_TAG -{ - unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. - unsigned char signiture_1[SIG_LEN]; // text line for company info - unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) - unsigned char chipId[CHIP_ID_LEN]; // chip id - unsigned char boardId[BOARD_ID_LEN]; // board id - unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host - unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length - unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address - unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. - unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address - unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. - unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address - unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. - unsigned char dualImage[FLAG_LEN]; // if 1, dual image - unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active - unsigned char reserved[RESERVED_LEN]; // reserved for later use - unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for - // now will be 4 unsigned char crc - unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) -} FILE_TAG, *PFILE_TAG; - -#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -#define CRC_LEN 4 - -// only included if for bcmTag.exe program -#ifdef BCMTAG_EXE_USE - -static unsigned long Crc32_table[256] = { - 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, - 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, - 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, - 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, - 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, - 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, - 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, - 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, - 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, - 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, - 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, - 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, - 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, - 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, - 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, - 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, - 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, - 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, - 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, - 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, - 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, - 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, - 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, - 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, - 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, - 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, - 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, - 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, - 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, - 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, - 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, - 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, - 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, - 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, - 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, - 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, - 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, - 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, - 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, - 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, - 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, - 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, - 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, - 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, - 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, - 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, - 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, - 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, - 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, - 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, - 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, - 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, - 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, - 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, - 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, - 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, - 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, - 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, - 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, - 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, - 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, - 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, - 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, - 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -}; -#endif // BCMTAG_USE - - -#endif // _BCMTAG_H_ - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h deleted file mode 100644 index 8c56840f42..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_intr.h +++ /dev/null @@ -1,59 +0,0 @@ -/* -<:copyright-gpl - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM_INTR_H -#define __BCM_INTR_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(CONFIG_BCM96338) -#include <6338_intr.h> -#endif -#if defined(CONFIG_BCM96345) -#include <6345_intr.h> -#endif -#if defined(CONFIG_BCM96348) -#include <6348_intr.h> -#endif - -/* defines */ -struct pt_regs; -typedef int (*FN_HANDLER) (int, void *); - -/* prototypes */ -extern void enable_brcm_irq(unsigned int irq); -extern void disable_brcm_irq(unsigned int irq); -extern int request_external_irq(unsigned int irq, - FN_HANDLER handler, unsigned long irqflags, - const char * devname, void *dev_id); -extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, - unsigned int interruptId); -extern void dump_intr_regs(void); - -/* compatibility definitions */ -#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) -#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h deleted file mode 100644 index ccfe965dc3..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcm_map_part.h +++ /dev/null @@ -1,34 +0,0 @@ -/* -<:copyright-gpl - Copyright 2004 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -#ifndef __BCM_MAP_PART_H -#define __BCM_MAP_PART_H - -#if defined(CONFIG_BCM96338) -#include <6338_map_part.h> -#endif -#if defined(CONFIG_BCM96345) -#include <6345_map_part.h> -#endif -#if defined(CONFIG_BCM96348) -#include <6348_map_part.h> -#endif - -#endif - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h deleted file mode 100644 index cecbd995a4..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmpci.h +++ /dev/null @@ -1,87 +0,0 @@ -/* -<:copyright-gpl - Copyright 2004 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -// -// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition -// -#ifndef BCMPCI_H -#define BCMPCI_H - -/* Memory window in internal system bus address space */ -#define BCM_PCI_MEM_BASE 0x08000000 -/* IO window in internal system bus address space */ -#define BCM_PCI_IO_BASE 0x0C000000 - -#define BCM_PCI_ADDR_MASK 0x1fffffff - -/* Memory window size (range) */ -#define BCM_PCI_MEM_SIZE_16MB 0x01000000 -/* IO window size (range) */ -#define BCM_PCI_IO_SIZE_64KB 0x00010000 - -/* PCI Configuration and I/O space acesss */ -#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) - -/* fake USB PCI slot */ -#define USB_HOST_SLOT 9 -#define USB_BAR0_MEM_SIZE 0x0800 - -#define BCM_HOST_MEM_SPACE1 0x10000000 -#define BCM_HOST_MEM_SPACE2 0x00000000 - -/* - * EBI bus clock is 33MHz and share with PCI bus - * each clock cycle is 30ns. - */ -/* attribute memory access wait cnt for 4306 */ -#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns -#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns -#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) -#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns - -/* common memory access wait cnt for 4306 */ -#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns -#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns -#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) -#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns - -#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also -#define PCCARD_VCC_33V 0x00010000 -#define PCCARD_VCC_50V 0x00020000 - -typedef enum { - MPI_CARDTYPE_NONE, // No Card in slot - MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot - MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot -} CardType; - -#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus - -#define pcmciaAttrOffset 0x00200000 -#define pcmciaMemOffset 0x00000000 -// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. -#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) -// Base Address is that mapped into the MPI ChipSelect registers. -// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. -#define pcmciaBase 0xbf000000 -#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) -#define pcmciaMem (pcmciaMemOffset | pcmciaBase) -#define pcmciaIo (pcmciaIoOffset | pcmciaBase) - -#endif diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h deleted file mode 100644 index 43aebc9c06..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/bcmtypes.h +++ /dev/null @@ -1,160 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ - -// -// bcmtypes.h - misc useful typedefs -// -#ifndef BCMTYPES_H -#define BCMTYPES_H - -// These are also defined in typedefs.h in the application area, so I need to -// protect against re-definition. - -#ifndef _TYPEDEFS_H_ -typedef unsigned char uint8; -typedef unsigned short uint16; -typedef unsigned long uint32; -typedef signed char int8; -typedef signed short int16; -typedef signed long int32; -#endif - -typedef unsigned char byte; -// typedef unsigned long sem_t; - -typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; -typedef signed long LONG,*PLONG; - -typedef unsigned int *PUINT; -typedef signed int INT; - -typedef unsigned short *PUSHORT; -typedef signed short SHORT,*PSHORT; -typedef unsigned short WORD,*PWORD; - -typedef unsigned char *PUCHAR; -typedef signed char *PCHAR; - -typedef void *PVOID; - -typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; - -typedef unsigned char BYTE,*PBYTE; - -//#ifndef __GNUC__ -//The following has been defined in Vxworks internally: vxTypesOld.h -//redefine under vxworks will cause error -typedef signed int *PINT; - -typedef signed char INT8; -typedef signed short INT16; -typedef signed long INT32; - -typedef unsigned char UINT8; -typedef unsigned short UINT16; -typedef unsigned long UINT32; - -typedef unsigned char UCHAR; -typedef unsigned short USHORT; -typedef unsigned int UINT; -typedef unsigned long ULONG; - -typedef void VOID; -typedef unsigned char BOOL; - -//#endif /* __GNUC__ */ - - -// These are also defined in typedefs.h in the application area, so I need to -// protect against re-definition. -#ifndef TYPEDEFS_H - -// Maximum and minimum values for a signed 16 bit integer. -#define MAX_INT16 32767 -#define MIN_INT16 -32768 - -// Useful for true/false return values. This uses the -// Taligent notation (k for constant). -typedef enum -{ - kFalse = 0, - kTrue = 1 -} Bool; - -#endif - -/* macros to protect against unaligned accesses */ - -#if 0 -/* first arg is an address, second is a value */ -#define PUT16( a, d ) { \ - *((byte *)a) = (byte)((d)>>8); \ - *(((byte *)a)+1) = (byte)(d); \ -} - -#define PUT32( a, d ) { \ - *((byte *)a) = (byte)((d)>>24); \ - *(((byte *)a)+1) = (byte)((d)>>16); \ - *(((byte *)a)+2) = (byte)((d)>>8); \ - *(((byte *)a)+3) = (byte)(d); \ -} - -/* first arg is an address, returns a value */ -#define GET16( a ) ( \ - (*((byte *)a) << 8) | \ - (*(((byte *)a)+1)) \ -) - -#define GET32( a ) ( \ - (*((byte *)a) << 24) | \ - (*(((byte *)a)+1) << 16) | \ - (*(((byte *)a)+2) << 8) | \ - (*(((byte *)a)+3)) \ -) -#endif - -#ifndef YES -#define YES 1 -#endif - -#ifndef NO -#define NO 0 -#endif - -#ifndef IN -#define IN -#endif - -#ifndef OUT -#define OUT -#endif - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) -#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) -#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) - -#endif diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h deleted file mode 100644 index e674cb10d7..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/include/board.h +++ /dev/null @@ -1,373 +0,0 @@ -/* -<:copyright-gpl - Copyright 2002 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -:> -*/ -/***********************************************************************/ -/* */ -/* MODULE: board.h */ -/* DATE: 97/02/18 */ -/* PURPOSE: Board specific information. This module should include */ -/* all base device addresses and board specific macros. */ -/* */ -/***********************************************************************/ -#ifndef _BOARD_H -#define _BOARD_H - -/*****************************************************************************/ -/* Misc board definitions */ -/*****************************************************************************/ - -#define DYING_GASP_API - -/*****************************************************************************/ -/* Physical Memory Map */ -/*****************************************************************************/ - -#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ -#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ - -/*****************************************************************************/ -/* Note that the addresses above are physical addresses and that programs */ -/* have to use converted addresses defined below: */ -/*****************************************************************************/ -#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ - -/*****************************************************************************/ -/* Select the PLL value to get the desired CPU clock frequency. */ -/* */ -/* */ -/*****************************************************************************/ -#define FPERIPH 50000000 - -#define ONEK 1024 -#define BLK64K (64*ONEK) -#define FLASH45_BLKS_BOOT_ROM 1 -#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) -#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ - -/*****************************************************************************/ -/* Note that the addresses above are physical addresses and that programs */ -/* have to use converted addresses defined below: */ -/*****************************************************************************/ -#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ - -/*****************************************************************************/ -/* Select the PLL value to get the desired CPU clock frequency. */ -/* */ -/* */ -/*****************************************************************************/ -#define FPERIPH 50000000 - -#define SDRAM_TYPE_ADDRESS_OFFSET 16 -#define NVRAM_DATA_OFFSET 0x0580 -#define NVRAM_DATA_ID 0x0f1e2d3c -#define BOARD_SDRAM_TYPE *(unsigned long *) \ - (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) - -#define ONEK 1024 -#define BLK64K (64*ONEK) - -// nvram and psi flash definitions for 45 -#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram -#define NVRAM_PSI_DEFAULT 24 // default psi in K byes - -/*****************************************************************************/ -/* NVRAM Offset and definition */ -/*****************************************************************************/ - -#define NVRAM_VERSION_NUMBER 2 -#define NVRAM_VERSION_NUMBER_ADDRESS 0 - -#define NVRAM_BOOTLINE_LEN 256 -#define NVRAM_BOARD_ID_STRING_LEN 16 -#define NVRAM_MAC_ADDRESS_LEN 6 -#define NVRAM_MAC_COUNT_MAX 32 - -/*****************************************************************************/ -/* Misc Offsets */ -/*****************************************************************************/ - -#define CFE_VERSION_OFFSET 0x0570 -#define CFE_VERSION_MARK_SIZE 5 -#define CFE_VERSION_SIZE 5 - -typedef struct -{ - unsigned long ulVersion; - char szBootline[NVRAM_BOOTLINE_LEN]; - char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; - unsigned long ulReserved1[2]; - unsigned long ulNumMacAddrs; - unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; - char chReserved[2]; - unsigned long ulCheckSum; -} NVRAM_DATA, *PNVRAM_DATA; - - -/*****************************************************************************/ -/* board ioctl calls for flash, led and some other utilities */ -/*****************************************************************************/ - - -/* Defines. for board driver */ -#define BOARD_IOCTL_MAGIC 'B' -#define BOARD_DRV_MAJOR 206 - -#define MAC_ADDRESS_ANY (unsigned long) -1 - -#define BOARD_IOCTL_FLASH_INIT \ - _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_FLASH_WRITE \ - _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_FLASH_READ \ - _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_NR_PAGES \ - _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_DUMP_ADDR \ - _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_MEMORY \ - _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_MIPS_SOFT_RESET \ - _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_LED_CTRL \ - _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_ID \ - _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_MAC_ADDRESS \ - _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ - _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_PSI_SIZE \ - _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_SDRAM_SIZE \ - _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_MONITOR_FD \ - _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ - _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_BOOTLINE \ - _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_BOOTLINE \ - _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ - _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_CHIP_ID \ - _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_NUM_ENET \ - _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_CFE_VER \ - _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_ENET_CFG \ - _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ - _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_TRIGGER_EVENT \ - _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_GET_TRIGGER_EVENT \ - _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ - _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) - -#define BOARD_IOCTL_SET_SES_LED \ - _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) - -//<>JUNHON, 2004/09/15 - -// for the action in BOARD_IOCTL_PARMS for flash operation -typedef enum -{ - PERSISTENT, - NVRAM, - BCM_IMAGE_CFE, - BCM_IMAGE_FS, - BCM_IMAGE_KERNEL, - BCM_IMAGE_WHOLE, - SCRATCH_PAD, - FLASH_SIZE, -} BOARD_IOCTL_ACTION; - - -typedef struct boardIoctParms -{ - char *string; - char *buf; - int strLen; - int offset; - BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ - int result; -} BOARD_IOCTL_PARMS; - - -// LED defines -typedef enum -{ - kLedAdsl, - kLedWireless, - kLedUsb, - kLedHpna, - kLedWanData, - kLedPPP, - kLedVoip, - kLedSes, - kLedLan, - kLedSelfTest, - kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. -} BOARD_LED_NAME; - -typedef enum -{ - kLedStateOff, /* turn led off */ - kLedStateOn, /* turn led on */ - kLedStateFail, /* turn led on red */ - kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ - kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ - kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ -} BOARD_LED_STATE; - - -// virtual and physical map pair defined in board.c -typedef struct ledmappair -{ - BOARD_LED_NAME ledName; // virtual led name - BOARD_LED_STATE ledInitState; // initial led state when the board boots. - unsigned short ledMask; // physical GPIO pin mask - unsigned short ledActiveLow; // reset bit to turn on LED - unsigned short ledMaskFail; // physical GPIO pin mask for state failure - unsigned short ledActiveLowFail;// reset bit to turn on LED -} LED_MAP_PAIR, *PLED_MAP_PAIR; - -typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); - -/* Flash storage address information that is determined by the flash driver. */ -typedef struct flashaddrinfo -{ - int flash_persistent_start_blk; - int flash_persistent_number_blk; - int flash_persistent_length; - unsigned long flash_persistent_blk_offset; - int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) - int flash_scratch_pad_number_blk; - int flash_scratch_pad_length; - unsigned long flash_scratch_pad_blk_offset; - int flash_nvram_start_blk; - int flash_nvram_number_blk; - int flash_nvram_length; - unsigned long flash_nvram_blk_offset; -} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; - -// scratch pad defines -/* SP - Persisten Scratch Pad format: - sp header : 32 bytes - tokenId-1 : 8 bytes - tokenId-1 len : 4 bytes - tokenId-1 data - .... - tokenId-n : 8 bytes - tokenId-n len : 4 bytes - tokenId-n data -*/ - -#define MAGIC_NUM_LEN 8 -#define MAGIC_NUMBER "gOGoBrCm" -#define TOKEN_NAME_LEN 16 -#define SP_VERSION 1 -#define SP_MAX_LEN 8 * 1024 // 8k buf before psi -#define SP_RESERVERD 16 - -typedef struct _SP_HEADER -{ - char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number - int SPVersion; // version number - int SPUsedLen; // used sp len - char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes -} SP_HEADER, *PSP_HEADER; - -typedef struct _TOKEN_DEF -{ - char tokenName[TOKEN_NAME_LEN]; - int tokenLen; -} SP_TOKEN, *PSP_TOKEN; - - -/*****************************************************************************/ -/* Function Prototypes */ -/*****************************************************************************/ -#if !defined(__ASM_ASM_H) -void dumpaddr( unsigned char *pAddr, int nLen ); - -int kerSysNvRamGet(char *string, int strLen, int offset); -int kerSysNvRamSet(char *string, int strLen, int offset); -int kerSysPersistentGet(char *string, int strLen, int offset); -int kerSysPersistentSet(char *string, int strLen, int offset); -int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); -int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); -int kerSysBcmImageSet( int flash_start_addr, char *string, int size); -int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); -int kerSysReleaseMacAddress( unsigned char *pucaAddr ); -int kerSysGetSdramSize( void ); -void kerSysGetBootline(char *string, int strLen); -void kerSysSetBootline(char *string, int strLen); -void kerSysMipsSoftReset(void); -void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); -int kerSysFlashSizeGet(void); -void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); -void kerSysDeregisterDyingGaspHandler(char *devname); -void kerSysWakeupMonitorTask( void ); -#endif - -#define BOOT_CFE 0 -#define BOOT_REDBOOT 1 - -extern int boot_loader_type; - -#endif /* _BOARD_H */ - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c new file mode 100644 index 0000000000..d492aa3cd6 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c @@ -0,0 +1,86 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static char *boot_loader_names[BOOT_LOADER_LAST+1] = { + [BOOT_LOADER_UNKNOWN] = "Unknown", + [BOOT_LOADER_CFE] = "CFE", + [BOOT_LOADER_REDBOOT] = "RedBoot" +}; + +/* boot loaders specific definitions */ +#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */ + +int boot_loader_type; +/* + * Boot loader detection routines + */ +static int __init detect_cfe(void) +{ + /* + * This method only works, when we are booted directly from the CFE. + */ + uint32_t cfe_handle = (uint32_t) fw_arg0; + uint32_t cfe_a1_val = (uint32_t) fw_arg1; + uint32_t cfe_entry = (uint32_t) fw_arg2; + uint32_t cfe_seal = (uint32_t) fw_arg3; + + /* Check for CFE by finding the CFE magic number */ + if (cfe_seal != CFE_EPTSEAL) + /* We are not booted from CFE */ + return 0; + + /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */ + if (cfe_a1_val != 0) + return 0; + + /* The cfe_handle, and the cfe_entry must be kernel mode addresses */ + if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) + return 0; + + return 1; +} + +static int __init detect_redboot(void) +{ + /* On Inventel Livebox, the boot loader is passed as a command line argument, check for it */ + if (!strncmp(arcs_cmdline, "boot_loader=RedBoot", 19)) + return 1; + return 0; +} + +void __init detect_bootloader(void) +{ + if (detect_cfe()) { + boot_loader_type = BOOT_LOADER_CFE; + printk("Boot loader is : %s\n", boot_loader_names[boot_loader_type]); + } + + if (detect_redboot()) { + boot_loader_type = BOOT_LOADER_REDBOOT; + } + else + boot_loader_type = BOOT_LOADER_UNKNOWN; +} + +EXPORT_SYMBOL(boot_loader_type); diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c index 7ee7526840..a606838f33 100644 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c @@ -35,6 +35,8 @@ #include #include #include +#include <6348_map_part.h> +#include <6348_intr.h> #include #include diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c index 44a542d2f8..af278a263a 100644 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c @@ -25,119 +25,49 @@ #include #include #include + #include #include #include #include +#include +#include -#include -#include -#include "boardparms.h" -#include "softdsl/AdslCoreDefs.h" - - -//char arcs_cmdline[CL_SIZE] __initdata = {0}; -/* inv_xde */ -int boot_loader_type; -int prom_argc; -char **prom_argv, **prom_envp; +#include "../cfe/cfe_private.h" -extern int do_syslog(int, char *, int); +extern void __init detect_bootloader(void); extern void serial_init(void); -extern void __init InitNvramInfo( void ); -extern void kerSysFlashInit( void ); -extern unsigned long get_nvram_start_addr(void); -void __init create_root_nfs_cmdline( char *cmdline ); +extern int boot_loader_type; #define MACH_BCM MACH_BCM96348 const char *get_system_type(void) { - /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); - - return( pNvramData->szBoardId );*/ - return "brcm63xx"; -} - -unsigned long getMemorySize(void) -{ - unsigned long ulSdramType = BOARD_SDRAM_TYPE; - - unsigned long ulSdramSize; - - switch( ulSdramType ) - { - case BP_MEMORY_16MB_1_CHIP: - case BP_MEMORY_16MB_2_CHIP: - ulSdramSize = 16 * 1024 * 1024; - break; - case BP_MEMORY_32MB_1_CHIP: - case BP_MEMORY_32MB_2_CHIP: - ulSdramSize = 32 * 1024 * 1024; - break; - case BP_MEMORY_64MB_2_CHIP: - ulSdramSize = 64 * 1024 * 1024; - break; - default: - ulSdramSize = 8 * 1024 * 1024; - break; - } - if (boot_loader_type == BOOT_CFE) - return ulSdramSize; - else - // assume that there is one contiguous memory map - return boot_mem_map.map[0].size; + return "Broadcom BCM963xx"; } -/* -------------------------------------------------------------------------- - Name: prom_init - -------------------------------------------------------------------------- */ void __init prom_init(void) { - extern ulong r4k_interval; + serial_init(); - serial_init(); + printk( "%s prom init\n", get_system_type() ); - prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; + PERF->IrqMask = 0; - if ((prom_argv > 0x80000000) && (prom_argv < 0x82000000)) { - strncpy(arcs_cmdline, prom_argv[1], CL_SIZE); - } + detect_bootloader(); - if (strncmp(arcs_cmdline, "boot_loader=RedBoot", 19) != 0) { - boot_loader_type = BOOT_CFE; - } - else { - boot_loader_type = BOOT_REDBOOT; - } - - do_syslog(8, NULL, 8); - - printk( "%s prom init\n", get_system_type() ); - - PERF->IrqMask = 0; - - arcs_cmdline[0] = '\0'; - - if (boot_loader_type == BOOT_CFE) - add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); - else - add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); - - mips_machgroup = MACH_GROUP_BRCM; - mips_machtype = MACH_BCM; - - BpSetBoardId("96348GW-10"); + if (boot_loader_type == BOOT_LOADER_CFE) { + cfe_setup(fw_arg0, fw_arg1, fw_arg2, fw_arg3); + add_memory_region(0, (boot_mem_map.map[0].size - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); + } + else + add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); + + mips_machgroup = MACH_GROUP_BRCM; + mips_machtype = MACH_BCM; } -/* -------------------------------------------------------------------------- - Name: prom_free_prom_memory -Abstract: - -------------------------------------------------------------------------- */ void __init prom_free_prom_memory(void) { - + /* We do not have any memory to free */ } - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c index bd53abb5f2..bb745aec6e 100644 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c @@ -37,6 +37,7 @@ #include #include +#include <6348_map_part.h> #include #define SER63XX_DEFAULT_BAUD 115200 @@ -54,7 +55,7 @@ -------------------------------------------------------------------------- */ void __init serial_init(void) { - UINT32 tmpVal = SER63XX_DEFAULT_BAUD; + u32 tmpVal = SER63XX_DEFAULT_BAUD; ULONG clockFreqHz; #if defined(CONFIG_BCM96345) diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c index 4a4fdadba5..bc28b549e5 100644 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -39,9 +40,12 @@ #include #include #include +#include +#include +#include extern void brcm_time_init(void); -extern unsigned long getMemorySize(void); +extern int boot_loader_type; #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) #include @@ -58,15 +62,15 @@ static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); */ static void brcm_machine_restart(char *command) { - const unsigned long ulSoftReset = 0x00000001; - unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; - *pulPllCtrl |= ulSoftReset; + const unsigned long ulSoftReset = 0x00000001; + unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; + *pulPllCtrl |= ulSoftReset; } static void brcm_machine_halt(void) { - printk("System halted\n"); - while (1); + printk("System halted\n"); + while (1); } #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) @@ -372,20 +376,23 @@ static int mpi_DetectPcCard(void) static int mpi_init(void) { - unsigned long data; - unsigned int chipid; - unsigned int chiprev; - unsigned int sdramsize; - - chipid = (PERF->RevID & 0xFFFF0000) >> 16; - chiprev = (PERF->RevID & 0xFF); - sdramsize = getMemorySize(); - /* - * Init the pci interface - */ - data = GPIO->GPIOMode; // GPIO mode register - data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus - GPIO->GPIOMode = data; // PCI internal arbiter + unsigned long data; + unsigned int chipid, chiprev, sdramsize; + + printk("Broadcom BCM963xx MPI\n"); + chipid = (PERF->RevID & 0xFFFF0000) >> 16; + chiprev = (PERF->RevID & 0xFF); + + if (boot_loader_type == BOOT_LOADER_CFE) + sdramsize = boot_mem_map.map[0].size; + else + sdramsize = 0x01000000; + /* + * Init the pci interface + */ + data = GPIO->GPIOMode; // GPIO mode register + data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus + GPIO->GPIOMode = data; // PCI internal arbiter /* * In the BCM6348 CardBus support is defaulted to Slot 0 @@ -456,68 +463,16 @@ static int mpi_init(void) } #endif -static int __init brcm63xx_setup(void) +void __init plat_mem_setup(void) { - extern int panic_timeout; - - _machine_restart = brcm_machine_restart; - _machine_halt = brcm_machine_halt; - pm_power_off = brcm_machine_halt; + _machine_restart = brcm_machine_restart; + _machine_halt = brcm_machine_halt; + pm_power_off = brcm_machine_halt; - board_time_init = brcm_time_init; - - panic_timeout = 5; + board_time_init = brcm_time_init; #if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) - /* mpi initialization */ - mpi_init(); + /* mpi initialization */ + mpi_init(); #endif - return 0; -} - -void __init plat_mem_setup(void) -{ - brcm63xx_setup(); -} - -/*************************************************************************** - * C++ New and delete operator functions - ***************************************************************************/ - -/* void *operator new(unsigned int sz) */ -void *_Znwj(unsigned int sz) -{ - return( kmalloc(sz, GFP_KERNEL) ); } - -/* void *operator new[](unsigned int sz)*/ -void *_Znaj(unsigned int sz) -{ - return( kmalloc(sz, GFP_KERNEL) ); -} - -/* placement new operator */ -/* void *operator new (unsigned int size, void *ptr) */ -void *ZnwjPv(unsigned int size, void *ptr) -{ - return ptr; -} - -/* void operator delete(void *m) */ -void _ZdlPv(void *m) -{ - kfree(m); -} - -/* void operator delete[](void *m) */ -void _ZdaPv(void *m) -{ - kfree(m); -} - -EXPORT_SYMBOL(_Znwj); -EXPORT_SYMBOL(_Znaj); -EXPORT_SYMBOL(ZnwjPv); -EXPORT_SYMBOL(_ZdlPv); -EXPORT_SYMBOL(_ZdaPv); - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h deleted file mode 100644 index b05d98ed9a..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h +++ /dev/null @@ -1,2 +0,0 @@ -#define ADSL_SDRAM_IMAGE_SIZE (384*1024) - diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c index b615c28429..8b82ada371 100644 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c +++ b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c @@ -35,6 +35,8 @@ #include #include +#include <6348_map_part.h> +#include <6348_intr.h> #include #include @@ -54,7 +56,7 @@ static unsigned long r4k_cur; /* What counter should be at next timer irq */ static inline unsigned long __init calculateCpuSpeed(void) { - UINT32 pllStrap = PERF->PllStrap; + u32 pllStrap = PERF->PllStrap; int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile new file mode 100644 index 0000000000..d9f046adf3 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Broadcom Common Firmware Environment support +# + +obj-y += cfe.o diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c new file mode 100644 index 0000000000..6d16111e1c --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c @@ -0,0 +1,533 @@ +/* + * Broadcom Common Firmware Environment (CFE) support + * + * Copyright 2000, 2001, 2002 + * Broadcom Corporation. All rights reserved. + * + * Copyright (C) 2006 Michael Buesch + * + * Original Authors: Mitch Lichtenberg, Chris Demetriou + * + * This software is furnished under license and may be used and copied only + * in accordance with the following terms and conditions. Subject to these + * conditions, you may download, copy, install, use, modify and distribute + * modified or unmodified copies of this software in source and/or binary + * form. No title or ownership is transferred hereby. + * + * 1) Any source code used, modified or distributed must reproduce and + * retain this copyright notice and list of conditions as they appear in + * the source file. + * + * 2) No right is granted to use any trade name, trademark, or logo of + * Broadcom Corporation. The "Broadcom Corporation" name may not be + * used to endorse or promote products derived from this software + * without the prior written permission of Broadcom Corporation. + * + * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR + * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE + * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE + * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include + +#include "cfe_private.h" + + +static cfe_uint_t cfe_handle; +static int (*cfe_trampoline)(long handle, long iocb); + + +#include + +void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1, + unsigned long fwarg2, unsigned long fwarg3) +{ + if (fwarg3 == 0x80300000) { + /* WRT54G workaround */ + fwarg3 = CFE_EPTSEAL; + fwarg2 = 0xBFC00500; + } + if (fwarg3 != CFE_EPTSEAL) { + /* We are not booted from CFE */ + return; + } + if (fwarg1 == 0) { + /* We are on the boot CPU */ + cfe_handle = (cfe_uint_t)fwarg0; + cfe_trampoline = CFE_TO_PTR(fwarg2); + } +} + +int cfe_vprintk(const char *fmt, va_list args) +{ + static char buffer[1024]; + static DEFINE_SPINLOCK(lock); + static const char pfx[] = "CFE-console: "; + static const size_t pfx_len = sizeof(pfx) - 1; + unsigned long flags; + int len, cnt, pos; + int handle; + int res; + + if (!cfe_present()) + return -ENODEV; + + spin_lock_irqsave(&lock, flags); + handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); + if (CFE_ISERR(handle)) { + len = -EIO; + goto out; + } + strcpy(buffer, pfx); + len = vscnprintf(buffer + pfx_len, + sizeof(buffer) - pfx_len - 2, + fmt, args); + len += pfx_len; + /* The CFE console requires CR-LF line-ends. + * Add a CR, if we only terminate lines with a LF. + * This does only fix CR-LF at the end of the string. + * So for multiple lines, use multiple cfe_vprintk calls. + */ + if (len > 1 && + buffer[len - 1] == '\n' && buffer[len - 2] != '\r') { + buffer[len - 1] = '\r'; + buffer[len] = '\n'; + len += 1; + } + cnt = len; + pos = 0; + while (cnt > 0) { + res = cfe_write(handle, buffer + pos, len - pos); + if (CFE_ISERR(res)) { + len = -EIO; + goto out; + } + cnt -= res; + pos += res; + } +out: + spin_unlock_irqrestore(&lock, flags); + + return len; +} + +int cfe_printk(const char *fmt, ...) +{ + va_list args; + int res; + + va_start(args, fmt); + res = cfe_vprintk(fmt, args); + va_end(args); + + return res; +} + +static int cfe_iocb_dispatch(struct cfe_iocb *iocb) +{ + if (!cfe_present()) + return CFE_ERR_UNSUPPORTED; + return cfe_trampoline((long)cfe_handle, (long)iocb); +} + +int cfe_present(void) +{ + return (cfe_trampoline != NULL); +} + +int cfe_close(int handle) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_CLOSE; + iocb.handle = handle; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_CPUCTL; + iocb.psize = sizeof(struct cfe_iocb_cpuctl); + iocb.cpuctl.number = cpu; + iocb.cpuctl.command = CFE_CPU_CMD_START; + iocb.cpuctl.gp = gp; + iocb.cpuctl.sp = sp; + iocb.cpuctl.a1 = a1; + iocb.cpuctl.start_addr = (long)fn; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_cpu_stop(int cpu) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_CPUCTL; + iocb.psize = sizeof(struct cfe_iocb_cpuctl); + iocb.cpuctl.number = cpu; + iocb.cpuctl.command = CFE_CPU_CMD_STOP; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_ENV_ENUM; + iocb.psize = sizeof(struct cfe_iocb_envbuf); + iocb.envbuf.index = idx; + iocb.envbuf.name = PTR_TO_CFE(name); + iocb.envbuf.name_len = namelen; + iocb.envbuf.val = PTR_TO_CFE(val); + iocb.envbuf.val_len = vallen; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_enumdev(int idx, char *name, int namelen) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + + iocb.fcode = CFE_CMD_DEV_ENUM; + iocb.psize = sizeof(struct cfe_iocb_envbuf); + iocb.envbuf.index = idx; + iocb.envbuf.name = PTR_TO_CFE(name); + iocb.envbuf.name_len = namelen; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_enummem(int idx, int flags, u64 *start, u64 *length, + u64 *type) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + + iocb.fcode = CFE_CMD_FW_MEMENUM; + iocb.flags = flags; + iocb.psize = sizeof(struct cfe_iocb_meminfo); + iocb.meminfo.index = idx; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (!CFE_ISERR(iocb.status)) { + *start = iocb.meminfo.addr; + *length = iocb.meminfo.size; + *type = iocb.meminfo.type; + } + + return iocb.status; +} + +int cfe_exit(int warm, int status) +{ + struct cfe_iocb iocb; + int err; + +printk("CFE REBOOT\n"); + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_RESTART; + if (warm) + iocb.flags = CFE_FLG_WARMSTART; + iocb.psize = sizeof(struct cfe_iocb_exitstat); + iocb.exitstat.status = status; + +printk("CALL\n"); + err = cfe_iocb_dispatch(&iocb); +printk("DONE\n"); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_flushcache(int flags) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_FLUSHCACHE; + iocb.flags = flags; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_getdevinfo(char *name) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_GETINFO; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.ptr = PTR_TO_CFE(name); + iocb.buffer.length = strlen(name); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.buffer.devflags; +} + +int cfe_getenv(char *name, char *dest, int destlen) +{ + struct cfe_iocb iocb; + int err; + + dest[0] = '\0'; + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_ENV_GET; + iocb.psize = sizeof(struct cfe_iocb_envbuf); + iocb.envbuf.name = PTR_TO_CFE(name); + iocb.envbuf.name_len = strlen(name); + iocb.envbuf.val = PTR_TO_CFE(dest); + iocb.envbuf.val_len = destlen; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_getfwinfo(struct cfe_fwinfo *info) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_GETINFO; + iocb.psize = sizeof(struct cfe_iocb_fwinfo); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return err; + + info->version = iocb.fwinfo.version; + info->totalmem = iocb.fwinfo.totalmem; + info->flags = iocb.fwinfo.flags; + info->boardid = iocb.fwinfo.boardid; + info->bootarea_va = iocb.fwinfo.bootarea_va; + info->bootarea_pa = iocb.fwinfo.bootarea_pa; + info->bootarea_size = iocb.fwinfo.bootarea_size; + + return iocb.status; +} + +int cfe_getstdhandle(int handletype) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_GETHANDLE; + iocb.flags = handletype; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.handle; +} + +int cfe_getticks(s64 *ticks) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_GETTIME; + iocb.psize = sizeof(struct cfe_iocb_time); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (!CFE_ISERR(iocb.status)) + *ticks = iocb.time.ticks; + + return iocb.status; +} + +int cfe_inpstat(int handle) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_INPSTAT; + iocb.handle = handle; + iocb.psize = sizeof(struct cfe_iocb_inpstat); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.inpstat.status; +} + +int cfe_ioctl(int handle, unsigned int ioctlnum, + unsigned char *buffer, int length, + int *retlen, u64 offset) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_IOCTL; + iocb.handle = handle; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.offset = offset; + iocb.buffer.ioctlcmd = ioctlnum; + iocb.buffer.ptr = PTR_TO_CFE(buffer); + iocb.buffer.length = length; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + if (retlen) + *retlen = iocb.buffer.retlen; + + return iocb.status; +} + +int cfe_open(char *name) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_OPEN; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.ptr = PTR_TO_CFE(name); + iocb.buffer.length = strlen(name); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.handle; +} + +int cfe_read(int handle, unsigned char *buffer, int length) +{ + return cfe_readblk(handle, 0, buffer, length); +} + +int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_READ; + iocb.handle = handle; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.offset = offset; + iocb.buffer.ptr = PTR_TO_CFE(buffer); + iocb.buffer.length = length; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.buffer.retlen; +} + +int cfe_setenv(char *name, char *val) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_ENV_SET; + iocb.psize = sizeof(struct cfe_iocb_envbuf); + iocb.envbuf.name = PTR_TO_CFE(name); + iocb.envbuf.name_len = strlen(name); + iocb.envbuf.val = PTR_TO_CFE(val); + iocb.envbuf.val_len = strlen(val); + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_write(int handle, unsigned char *buffer, int length) +{ + return cfe_writeblk(handle, 0, buffer, length); +} + +int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_WRITE; + iocb.handle = handle; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.offset = offset; + iocb.buffer.ptr = PTR_TO_CFE(buffer); + iocb.buffer.length = length; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.buffer.retlen; +} diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h new file mode 100644 index 0000000000..0a604d3bbd --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h @@ -0,0 +1,176 @@ +/* + * Broadcom Common Firmware Environment (CFE) support + * + * Copyright 2000, 2001, 2002 + * Broadcom Corporation. All rights reserved. + * + * Copyright (C) 2006 Michael Buesch + * + * Original Authors: Mitch Lichtenberg, Chris Demetriou + * + * This software is furnished under license and may be used and copied only + * in accordance with the following terms and conditions. Subject to these + * conditions, you may download, copy, install, use, modify and distribute + * modified or unmodified copies of this software in source and/or binary + * form. No title or ownership is transferred hereby. + * + * 1) Any source code used, modified or distributed must reproduce and + * retain this copyright notice and list of conditions as they appear in + * the source file. + * + * 2) No right is granted to use any trade name, trademark, or logo of + * Broadcom Corporation. The "Broadcom Corporation" name may not be + * used to endorse or promote products derived from this software + * without the prior written permission of Broadcom Corporation. + * + * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR + * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE + * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE + * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef LINUX_CFE_PRIVATE_H_ +#define LINUX_CFE_PRIVATE_H_ + +#ifndef __ASSEMBLY__ + +/* Seal indicating CFE's presence, passed to the kernel. */ +#define CFE_EPTSEAL 0x43464531 + +#define CFE_CMD_FW_GETINFO 0 +#define CFE_CMD_FW_RESTART 1 +#define CFE_CMD_FW_BOOT 2 +#define CFE_CMD_FW_CPUCTL 3 +#define CFE_CMD_FW_GETTIME 4 +#define CFE_CMD_FW_MEMENUM 5 +#define CFE_CMD_FW_FLUSHCACHE 6 + +#define CFE_CMD_DEV_GETHANDLE 9 +#define CFE_CMD_DEV_ENUM 10 +#define CFE_CMD_DEV_OPEN 11 +#define CFE_CMD_DEV_INPSTAT 12 +#define CFE_CMD_DEV_READ 13 +#define CFE_CMD_DEV_WRITE 14 +#define CFE_CMD_DEV_IOCTL 15 +#define CFE_CMD_DEV_CLOSE 16 +#define CFE_CMD_DEV_GETINFO 17 + +#define CFE_CMD_ENV_ENUM 20 +#define CFE_CMD_ENV_GET 22 +#define CFE_CMD_ENV_SET 23 +#define CFE_CMD_ENV_DEL 24 + +#define CFE_CMD_MAX 32 + +#define CFE_CMD_VENDOR_USE 0x8000 /* codes above this are for customer use */ + +typedef u64 cfe_uint_t; +typedef s64 cfe_int_t; +typedef s64 cfe_ptr_t; + +/* Cast a pointer from native to CFE-API pointer and back */ +#define CFE_TO_PTR(p) ((void *)(unsigned long)(p)) +#define PTR_TO_CFE(p) ((cfe_ptr_t)(unsigned long)(p)) + +struct cfe_iocb_buf { + cfe_uint_t offset; /* offset on device (bytes) */ + cfe_ptr_t ptr; /* pointer to a buffer */ + cfe_uint_t length; /* length of this buffer */ + cfe_uint_t retlen; /* returned length (for read ops) */ + union { + cfe_uint_t ioctlcmd; /* IOCTL command (used only for IOCTLs) */ + cfe_uint_t devflags; /* Returned device info flags */ + }; +}; + +struct cfe_iocb_inpstat { + cfe_uint_t status; /* 1 means input available */ +}; + +struct cfe_iocb_envbuf { + cfe_int_t index; /* 0-based enumeration index */ + cfe_ptr_t name; /* name string buffer */ + cfe_int_t name_len; /* size of name buffer */ + cfe_ptr_t val; /* value string buffer */ + cfe_int_t val_len; /* size of value string buffer */ +}; + +struct cfe_iocb_cpuctl { + cfe_uint_t number; /* cpu number to control */ + cfe_uint_t command; /* command to issue to CPU */ + cfe_uint_t start_addr; /* CPU start address */ + cfe_uint_t gp; /* starting GP value */ + cfe_uint_t sp; /* starting SP value */ + cfe_uint_t a1; /* starting A1 value */ +}; + +struct cfe_iocb_time { + cfe_int_t ticks; /* current time in ticks */ +}; + +struct cfe_iocb_exitstat { + cfe_int_t status; +}; + +struct cfe_iocb_meminfo { + cfe_int_t index; /* 0-based enumeration index */ + cfe_int_t type; /* type of memory block */ + cfe_uint_t addr; /* physical start address */ + cfe_uint_t size; /* block size */ +}; + +struct cfe_iocb_fwinfo { + cfe_int_t version; /* major, minor, eco version */ + cfe_int_t totalmem; /* total installed mem */ + cfe_int_t flags; /* various flags */ + cfe_int_t boardid; /* board ID */ + cfe_int_t bootarea_va; /* VA of boot area */ + cfe_int_t bootarea_pa; /* PA of boot area */ + cfe_int_t bootarea_size; /* size of boot area */ + cfe_int_t reserved1; + cfe_int_t reserved2; + cfe_int_t reserved3; +}; + +/* CFE I/O Control Block */ +struct cfe_iocb { + cfe_uint_t fcode; /* IOCB function code */ + cfe_int_t status; /* return status */ + cfe_int_t handle; /* file/device handle */ + cfe_uint_t flags; /* flags for this IOCB */ + cfe_uint_t psize; /* size of parameter list */ + union { + struct cfe_iocb_buf buffer; /* buffer parameters */ + struct cfe_iocb_inpstat inpstat; /* input status parameters */ + struct cfe_iocb_envbuf envbuf; /* environment function parameters */ + struct cfe_iocb_cpuctl cpuctl; /* CPU control parameters */ + struct cfe_iocb_time time; /* timer parameters */ + struct cfe_iocb_meminfo meminfo; /* memory arena info parameters */ + struct cfe_iocb_fwinfo fwinfo; /* firmware information */ + struct cfe_iocb_exitstat exitstat; /* Exit Status */ + }; +}; + + +#include + +void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1, + unsigned long fwarg2, unsigned long fwarg3); + +#else /* __ASSEMBLY__ */ + + .macro cfe_early_init +#ifdef CONFIG_CFE + jal cfe_setup +#endif + .endm + +#endif /* __ASSEMBLY__ */ +#endif /* LINUX_CFE_PRIVATE_H_ */ diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c b/target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c index b5a8e15871..ae71ebc73b 100644 --- a/target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c +++ b/target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c @@ -23,6 +23,8 @@ #include #include #include +#include <6348_intr.h> +#include <6348_map_part.h> static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c b/target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c index b051c56083..ee1647121e 100644 --- a/target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c +++ b/target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c @@ -24,6 +24,8 @@ #include #include +#include <6348_intr.h> +#include <6348_map_part.h> #include #include diff --git a/target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c b/target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c index c4c4526b49..c7013cc975 100644 --- a/target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c +++ b/target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c @@ -1,277 +1,474 @@ /* - * $Id$ - * Copyright (C) 2006 Florian Fainelli - * Mike Albon - * Copyright (C) $Date$ $Author$ + * Copyright (C) 2006 Felix Fietkau + * Copyright (C) 2005 Waldemar Brodkorb + * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * original functions for finding root filesystem from Mike Baker * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This is the BCM963xx flash map driver, in its actual state it only supports BCM96348 devices - * this driver is able to manage both bootloader we found on these boards : CFE and RedBoot - * - * RedBoot : - * - this bootloader allows us to parse partitions and therefore deduce the MTD partition table + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * - * CFE : - * - CFE partitionning can be detected as for BCM947xx devices + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Copyright 2001-2003, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. * + * Flash mapping for BCM963XX boards */ -#include #include +#include +#include #include -#include +#include #include +#include +#ifdef CONFIG_MTD_PARTITIONS #include -#include -#include +#endif +#include +#include +#include +#include -#define WINDOW_ADDR 0x1FC00000 /* Real address of the flash */ -#define WINDOW_SIZE 0x400000 /* Size of flash */ -#define BUSWIDTH 2 /* Buswidth */ -#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */ -#define IMAGE_LEN 10 /* Length of Length Field */ -#define ADDRESS_LEN 12 /* Length of Address field */ -#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) +#include -extern int boot_loader_type; /* For RedBoot / CFE detection */ +extern int boot_loader_type; extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin); static struct mtd_partition *parsed_parts; -static void __exit bcm963xx_mtd_cleanup(void); -static struct mtd_info *bcm963xx_mtd_info; +#define TRX_MAGIC 0x30524448 /* "HDR0" */ +#define TRX_VERSION 1 +#define TRX_MAX_LEN 0x3A0000 +#define TRX_NO_HEADER 1 /* Do not write TRX header */ +#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ +#define TRX_MAX_OFFSET 3 -static struct map_info bcm963xx_map = { - .name = "bcm963xx", - .size = WINDOW_SIZE, - .bankwidth = BUSWIDTH, - .phys = WINDOW_ADDR, +struct trx_header { + u32 magic; /* "HDR0" */ + u32 len; /* Length of file including header */ + u32 crc32; /* 32-bit CRC from flag_version to end of file */ + u32 flag_version; /* 0:15 flags, 16:31 version */ + u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ }; +#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) +#define NVRAM_SPACE 0x8000 +#define WINDOW_ADDR 0x1FC00000 +#define WINDOW_SIZE 0x400000 +#define BUSWIDTH 2 -int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts) -{ - int nrparts = 2, curpart = 0; // CFE and NVRAM always present. - struct bcm963xx_cfe_map { - unsigned char tagVersion[4]; // Version of the image tag - unsigned char sig_1[20]; // Company Line 1 - unsigned char sig_2[14]; // Company Line 2 - unsigned char chipid[6]; // Chip this image is for - unsigned char boardid[16]; // Board name - unsigned char bigEndian[2]; // Map endianness -- 1 BE 0 LE - unsigned char totalLength[IMAGE_LEN]; //Total length of image - unsigned char cfeAddress[ADDRESS_LEN]; // Address in memory of CFE - unsigned char cfeLength[IMAGE_LEN]; // Size of CFE - unsigned char rootAddress[ADDRESS_LEN]; // Address in memory of rootfs - unsigned char rootLength[IMAGE_LEN]; // Size of rootfs - unsigned char kernelAddress[ADDRESS_LEN]; // Address in memory of kernel - unsigned char kernelLength[IMAGE_LEN]; // Size of kernel - unsigned char dualImage[2]; // Unused at present - unsigned char inactiveFlag[2]; // Unused at present - unsigned char reserved1[74]; // Reserved area not in use - unsigned char imageCRC[4]; // CRC32 of images - unsigned char reserved2[16]; // Unused at present - unsigned char headerCRC[4]; // CRC32 of header excluding tagVersion - unsigned char reserved3[16]; // Unused at present - } *buf; - struct mtd_partition *parts; - int ret; - size_t retlen; - unsigned int rootfsaddr, kerneladdr, spareaddr; - unsigned int rootfslen, kernellen, sparelen, totallen; - int namelen = 0; - int i; - // Allocate memory for buffer - buf = vmalloc(sizeof(struct bcm963xx_cfe_map)); - - if (!buf) - return -ENOMEM; - - // Get the tag - ret = master->read(master,master->erasesize,sizeof(struct bcm963xx_cfe_map), &retlen, (void *)buf); - if (retlen != sizeof(struct bcm963xx_cfe_map)){ - vfree(buf); - return -EIO; - }; - printk("bcm963xx: CFE boot tag found with version %s and board type %s.\n",buf->tagVersion,buf->boardid); - // Get the values and calculate - sscanf(buf->rootAddress,"%u", &rootfsaddr); - rootfsaddr = rootfsaddr - EXTENDED_SIZE; - sscanf(buf->rootLength, "%u", &rootfslen); - sscanf(buf->kernelAddress, "%u", &kerneladdr); - kerneladdr = kerneladdr - EXTENDED_SIZE; - sscanf(buf->kernelLength, "%u", &kernellen); - sscanf(buf->totalLength, "%u", &totallen); - spareaddr = ROUNDUP(totallen,master->erasesize) + master->erasesize; - sparelen = master->size - spareaddr - master->erasesize; - // Determine number of partitions - namelen = 8; - if (rootfslen > 0){ - nrparts++; - namelen =+ 6; - }; - if (kernellen > 0){ - nrparts++; - namelen =+ 6; - }; - if (sparelen > 0){ - nrparts++; - namelen =+ 6; - }; - // Ask kernel for more memory. - parts = kmalloc(sizeof(*parts)*nrparts+10*nrparts, GFP_KERNEL); - if (!parts){ - vfree(buf); - return -ENOMEM; - }; - memset(parts,0,sizeof(*parts)*nrparts+10*nrparts); - // Start building partition list - parts[curpart].name = "CFE"; - parts[curpart].offset = 0; - parts[curpart].size = master->erasesize; - curpart++; - if (kernellen > 0){ - parts[curpart].name = "Kernel"; - parts[curpart].offset = kerneladdr; - parts[curpart].size = kernellen; - curpart++; - }; - if (rootfslen > 0){ - parts[curpart].name = "Rootfs"; - parts[curpart].offset = rootfsaddr; - parts[curpart].size = rootfslen; - curpart++; - }; - if (sparelen > 0){ - parts[curpart].name = "OpenWrt"; - parts[curpart].offset = spareaddr; - parts[curpart].size = sparelen; - curpart++; - }; - parts[curpart].name = "NVRAM"; - parts[curpart].offset = master->size - master->erasesize; - parts[curpart].size = master->erasesize; - for (i = 0; i < nrparts; i++) { - printk("bcm963xx: Partition %d is %s offset %x and length %x\n", i, parts[i].name, parts[i].offset, parts[i].size); - } - *pparts = parts; - vfree(buf); - return nrparts; +#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */ + +static struct mtd_info *bcm963xx_mtd; + +static struct map_info bcm963xx_map = { + .name = "Physically mapped flash", + .size = WINDOW_SIZE, + .bankwidth = BUSWIDTH, + .phys = WINDOW_ADDR, }; +#ifdef CONFIG_MTD_PARTITIONS + static struct mtd_partition bcm963xx_parts[] = { - { name: "bootloader", size: 0, offset: 0, mask_flags: MTD_WRITEABLE }, - { name: "rootfs", size: 0, offset: 0}, - { name: "jffs2", size: 5 * 0x10000, offset: 57*0x10000} + { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, }, + { name: "linux", offset: 0, size: 0, }, + { name: "rootfs", offset: 0, size: 0, }, + { name: "nvram", offset: 0, size: 0, }, + { name: "OpenWrt", offset: 0, size: 0, }, + { name: NULL, }, }; -static int bcm963xx_parts_size = sizeof(bcm963xx_parts) / sizeof(bcm963xx_parts[0]); +static int __init +find_cfe_size(struct mtd_info *mtd, size_t size) +{ + struct trx_header *trx; + unsigned char buf[512]; + int off; + size_t len; + int blocksize; + + trx = (struct trx_header *) buf; + + blocksize = mtd->erasesize; + if (blocksize < 0x10000) + blocksize = 0x10000; -static int bcm963xx_detect_cfe(struct mtd_info *master) + for (off = (128*1024); off < size; off += blocksize) { + memset(buf, 0xe5, sizeof(buf)); + + /* + * Read into buffer + */ + if (mtd->read(mtd, off, sizeof(buf), &len, buf) || + len != sizeof(buf)) + continue; + + /* found a TRX header */ + if (le32_to_cpu(trx->magic) == TRX_MAGIC) { + goto found; + } + } + + printk(KERN_NOTICE + "%s: Couldn't find bootloader size\n", + mtd->name); + return -1; + + found: + printk(KERN_NOTICE "bootloader size: %d\n", off); + return off; + +} + +/* + * Copied from mtdblock.c + * + * Cache stuff... + * + * Since typical flash erasable sectors are much larger than what Linux's + * buffer cache can handle, we must implement read-modify-write on flash + * sectors for each block write requests. To avoid over-erasing flash sectors + * and to speed things up, we locally cache a whole flash sector while it is + * being written to until a different sector is required. + */ + +static void erase_callback(struct erase_info *done) { - int idoffset = 0x4e0; - static char idstring[8] = "CFE1CFE1"; - char buf[8]; - int ret; - size_t retlen; - - ret = master->read(master, idoffset, 8, &retlen, (void *)buf); - printk("bcm963xx: Read Signature value of %s\n", buf); - return strcmp(idstring,buf); + wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; + wake_up(wait_q); } -static int __init bcm963xx_mtd_init(void) +static int erase_write (struct mtd_info *mtd, unsigned long pos, + int len, const char *buf) { - printk("bcm963xx: 0x%08x at 0x%08x\n", WINDOW_SIZE, WINDOW_ADDR); - bcm963xx_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); - - if (!bcm963xx_map.virt) { - printk("bcm963xx: Failed to ioremap\n"); - return -EIO; - } - - simple_map_init(&bcm963xx_map); - - bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map); - - if (bcm963xx_mtd_info) { - bcm963xx_mtd_info->owner = THIS_MODULE; - - //if (boot_loader_type == BOOT_CFE) - if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0) - { - int parsed_nr_parts = 0; - char * part_type; - printk("bcm963xx: CFE bootloader detected\n"); - //add_mtd_device(bcm963xx_mtd_info); - //add_mtd_partitions(bcm963xx_mtd_info, bcm963xx_parts, bcm963xx_parts_size); - if (parsed_nr_parts == 0) { - int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts); - if (ret > 0) { - part_type = "CFE"; - parsed_nr_parts = ret; - } - } - add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts); - return 0; - } - else - { - int parsed_nr_parts = 0; - char * part_type; - - if (bcm963xx_mtd_info->size > 0x00400000) { - printk("Support for extended flash memory size : 0x%08X ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size); - bcm963xx_map.virt = (unsigned long)(EXTENDED_SIZE); - } + struct erase_info erase; + DECLARE_WAITQUEUE(wait, current); + wait_queue_head_t wait_q; + size_t retlen; + int ret; + + /* + * First, let's erase the flash block. + */ + + init_waitqueue_head(&wait_q); + erase.mtd = mtd; + erase.callback = erase_callback; + erase.addr = pos; + erase.len = len; + erase.priv = (u_long)&wait_q; + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&wait_q, &wait); + + ret = mtd->erase(mtd, &erase); + if (ret) { + set_current_state(TASK_RUNNING); + remove_wait_queue(&wait_q, &wait); + printk (KERN_WARNING "erase of region [0x%lx, 0x%x] " + "on \"%s\" failed\n", + pos, len, mtd->name); + return ret; + } + + schedule(); /* Wait for erase to finish. */ + remove_wait_queue(&wait_q, &wait); + + /* + * Next, writhe data to flash. + */ + + ret = mtd->write (mtd, pos, len, &retlen, buf); + if (ret) + return ret; + if (retlen != len) + return -EIO; + return 0; +} + + + + +static int __init +find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part) +{ + struct trx_header trx, *trx2; + unsigned char buf[512], *block; + int off, blocksize; + u32 i, crc = ~0; + size_t len; + struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; + + blocksize = mtd->erasesize; + if (blocksize < 0x10000) + blocksize = 0x10000; + + for (off = (128*1024); off < size; off += blocksize) { + memset(&trx, 0xe5, sizeof(trx)); + + /* + * Read into buffer + */ + if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) || + len != sizeof(trx)) + continue; + + /* found a TRX header */ + if (le32_to_cpu(trx.magic) == TRX_MAGIC) { + part->offset = le32_to_cpu(trx.offsets[2]) ? : + le32_to_cpu(trx.offsets[1]); + part->size = le32_to_cpu(trx.len); + + part->size -= part->offset; + part->offset += off; + + goto found; + } + } + + printk(KERN_NOTICE + "%s: Couldn't find root filesystem\n", + mtd->name); + return -1; + + found: + if (part->size == 0) + return 0; + + if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf)) + return 0; + + if (*((__u32 *) buf) == SQUASHFS_MAGIC) { + printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", mtd->name, (u32) sb->bytes_used); + + /* Update the squashfs partition size based on the superblock info */ + part->size = sb->bytes_used; + len = part->offset + part->size; + len += (mtd->erasesize - 1); + len &= ~(mtd->erasesize - 1); + part->size = len - part->offset; + } else if (*((__u16 *) buf) == JFFS2_MAGIC_BITMASK) { + printk(KERN_INFO "%s: Filesystem type: jffs2\n", mtd->name); + + /* Move the squashfs outside of the trx */ + part->size = 0; + } else { + printk(KERN_INFO "%s: Filesystem type: unknown\n", mtd->name); + return 0; + } + + if (trx.len != part->offset + part->size - off) { + /* Update the trx offsets and length */ + trx.len = part->offset + part->size - off; + + /* Update the trx crc32 */ + for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) { + if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf)) + return 0; + crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i)); + } + trx.crc32 = crc; + + /* read first eraseblock from the trx */ + block = kmalloc(mtd->erasesize, GFP_KERNEL); + trx2 = (struct trx_header *) block; + if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) { + printk("Error accessing the first trx eraseblock\n"); + return 0; + } + + printk("Updating TRX offsets and length:\n"); + printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32); + printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32); + + /* Write updated trx header to the flash */ + memcpy(block, &trx, sizeof(trx)); + if (mtd->unlock) + mtd->unlock(mtd, off, mtd->erasesize); + erase_write(mtd, off, mtd->erasesize, block); + if (mtd->sync) + mtd->sync(mtd); + kfree(block); + printk("Done\n"); + } + + return part->size; +} + +struct mtd_partition * __init +init_mtd_partitions(struct mtd_info *mtd, size_t size) +{ + int cfe_size; + + if ((cfe_size = find_cfe_size(mtd,size)) < 0) + return NULL; + + /* boot loader */ + bcm963xx_parts[0].offset = 0; + bcm963xx_parts[0].size = cfe_size; + + /* nvram */ + if (cfe_size != 384 * 1024) { + bcm963xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize); + bcm963xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize); + } else { + /* nvram (old 128kb config partition on netgear wgt634u) */ + bcm963xx_parts[3].offset = bcm963xx_parts[0].size; + bcm963xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize); + } + + /* linux (kernel and rootfs) */ + if (cfe_size != 384 * 1024) { + bcm963xx_parts[1].offset = bcm963xx_parts[0].size; + bcm963xx_parts[1].size = bcm963xx_parts[3].offset - + bcm963xx_parts[1].offset; + } else { + /* do not count the elf loader, which is on one block */ + bcm963xx_parts[1].offset = bcm963xx_parts[0].size + + bcm963xx_parts[3].size + mtd->erasesize; + bcm963xx_parts[1].size = size - + bcm963xx_parts[0].size - + (2*bcm963xx_parts[3].size) - + mtd->erasesize; + } + + /* find and size rootfs */ + if (find_root(mtd,size,&bcm963xx_parts[2])==0) { + /* entirely jffs2 */ + bcm963xx_parts[4].name = NULL; + bcm963xx_parts[2].size = size - bcm963xx_parts[2].offset - + bcm963xx_parts[3].size; + } else { + /* legacy setup */ + /* calculate leftover flash, and assign it to the jffs2 partition */ + if (cfe_size != 384 * 1024) { + bcm963xx_parts[4].offset = bcm963xx_parts[2].offset + + bcm963xx_parts[2].size; + if ((bcm963xx_parts[4].offset % mtd->erasesize) > 0) { + bcm963xx_parts[4].offset += mtd->erasesize - + (bcm963xx_parts[4].offset % mtd->erasesize); + } + bcm963xx_parts[4].size = bcm963xx_parts[3].offset - + bcm963xx_parts[4].offset; + } else { + bcm963xx_parts[4].offset = bcm963xx_parts[2].offset + + bcm963xx_parts[2].size; + if ((bcm963xx_parts[4].offset % mtd->erasesize) > 0) { + bcm963xx_parts[4].offset += mtd->erasesize - + (bcm963xx_parts[4].offset % mtd->erasesize); + } + bcm963xx_parts[4].size = size - bcm963xx_parts[3].size - + bcm963xx_parts[4].offset; + } + } + + return bcm963xx_parts; +} +#endif + +int __init init_bcm963xx_map(void) +{ + size_t size; + int ret = 0; +#ifdef CONFIG_MTD_PARTITIONS + struct mtd_partition *parts; + int i; +#endif + + printk("BCM963xx flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE); + bcm963xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE); + + if (!bcm963xx_map.virt) { + printk("Failed to ioremap\n"); + return -EIO; + } + simple_map_init(&bcm963xx_map); + + if (!(bcm963xx_mtd = do_map_probe("cfi_probe", &bcm963xx_map))) { + printk("Failed to do_map_probe\n"); + iounmap((void *)bcm963xx_map.virt); + return -ENXIO; + } + + bcm963xx_mtd->owner = THIS_MODULE; + + size = bcm963xx_mtd->size; + + printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR); + +#ifdef CONFIG_MTD_PARTITIONS + if (boot_loader_type == BOOT_LOADER_CFE) { + parts = init_mtd_partitions(bcm963xx_mtd, size); + for (i = 0; parts[i].name; i++); + ret = add_mtd_partitions(bcm963xx_mtd, parts, i); + if (ret) { + printk(KERN_ERR "Flash: add_mtd_partitions failed\n"); + goto fail; + } + } + else { + int parsed_nr_parts = 0; + char * part_type; + + if (bcm963xx_mtd->size > 0x00400000) { + printk("Support for extended flash memory size : 0x%08X ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd->size); + bcm963xx_map.virt = (unsigned long)EXTENDED_SIZE; + } #ifdef CONFIG_MTD_REDBOOT_PARTS - if (parsed_nr_parts == 0) { - int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0); - if (ret > 0) { - part_type = "RedBoot"; - parsed_nr_parts = ret; - } - } + if (parsed_nr_parts == 0) { + int ret = parse_redboot_partitions(bcm963xx_mtd, &parsed_parts, 0); + if (ret > 0) { + part_type = "RedBoot"; + parsed_nr_parts = ret; + } + } +#endif + add_mtd_partitions(bcm963xx_mtd, parsed_parts, parsed_nr_parts); #endif - add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts); + } + return 0; - return 0; - } - } - iounmap(bcm963xx_map.virt); - return -ENXIO; + fail: + if (bcm963xx_mtd) + map_destroy(bcm963xx_mtd); + if (bcm963xx_map.virt) + iounmap((void *)bcm963xx_map.virt); + bcm963xx_map.virt = 0; + return ret; } -static void __exit bcm963xx_mtd_cleanup(void) +void __exit cleanup_bcm963xx_map(void) { - if (bcm963xx_mtd_info) { - del_mtd_partitions(bcm963xx_mtd_info); - map_destroy(bcm963xx_mtd_info); - } - - if (bcm963xx_map.virt) { - iounmap(bcm963xx_map.virt); - bcm963xx_map.virt = 0; - } +#ifdef CONFIG_MTD_PARTITIONS + del_mtd_partitions(bcm963xx_mtd); +#endif + map_destroy(bcm963xx_mtd); + iounmap((void *)bcm963xx_map.virt); } -module_init(bcm963xx_mtd_init); -module_exit(bcm963xx_mtd_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Florian Fainelli Mike Albon "); +module_init(init_bcm963xx_map); +module_exit(cleanup_bcm963xx_map); diff --git a/target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c b/target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c index 282e7d61a1..f024f23c69 100644 --- a/target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c +++ b/target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c @@ -44,6 +44,8 @@ #include #include #include +#include <6348_map_part.h> +#include <6348_intr.h> static DEFINE_SPINLOCK(bcm963xx_serial_lock); diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/cfe.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/cfe.h new file mode 100644 index 0000000000..47c3f5613d --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/cfe.h @@ -0,0 +1,189 @@ +/* + * Broadcom Common Firmware Environment (CFE) support + * + * Copyright 2000, 2001, 2002 + * Broadcom Corporation. All rights reserved. + * + * Copyright (C) 2006 Michael Buesch + * + * Original Authors: Mitch Lichtenberg, Chris Demetriou + * + * This software is furnished under license and may be used and copied only + * in accordance with the following terms and conditions. Subject to these + * conditions, you may download, copy, install, use, modify and distribute + * modified or unmodified copies of this software in source and/or binary + * form. No title or ownership is transferred hereby. + * + * 1) Any source code used, modified or distributed must reproduce and + * retain this copyright notice and list of conditions as they appear in + * the source file. + * + * 2) No right is granted to use any trade name, trademark, or logo of + * Broadcom Corporation. The "Broadcom Corporation" name may not be + * used to endorse or promote products derived from this software + * without the prior written permission of Broadcom Corporation. + * + * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR + * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE + * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE + * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef LINUX_CFE_API_H_ +#define LINUX_CFE_API_H_ + +#include + + +#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ +#define CFE_MI_AVAILABLE 1 /* memory is available */ + +#define CFE_FLG_WARMSTART 0x00000001 +#define CFE_FLG_FULL_ARENA 0x00000001 +#define CFE_FLG_ENV_PERMANENT 0x00000001 + +#define CFE_CPU_CMD_START 1 +#define CFE_CPU_CMD_STOP 0 + +#define CFE_STDHANDLE_CONSOLE 0 + +#define CFE_DEV_NETWORK 1 +#define CFE_DEV_DISK 2 +#define CFE_DEV_FLASH 3 +#define CFE_DEV_SERIAL 4 +#define CFE_DEV_CPU 5 +#define CFE_DEV_NVRAM 6 +#define CFE_DEV_CLOCK 7 +#define CFE_DEV_OTHER 8 +#define CFE_DEV_MASK 0x0F + +#define CFE_CACHE_FLUSH_D 1 +#define CFE_CACHE_INVAL_I 2 +#define CFE_CACHE_INVAL_D 4 +#define CFE_CACHE_INVAL_L2 8 + +#define CFE_FWI_64BIT 0x00000001 +#define CFE_FWI_32BIT 0x00000002 +#define CFE_FWI_RELOC 0x00000004 +#define CFE_FWI_UNCACHED 0x00000008 +#define CFE_FWI_MULTICPU 0x00000010 +#define CFE_FWI_FUNCSIM 0x00000020 +#define CFE_FWI_RTLSIM 0x00000040 + +struct cfe_fwinfo { + s64 version; /* major, minor, eco version */ + s64 totalmem; /* total installed mem */ + s64 flags; /* various flags */ + s64 boardid; /* board ID */ + s64 bootarea_va; /* VA of boot area */ + s64 bootarea_pa; /* PA of boot area */ + s64 bootarea_size; /* size of boot area */ +}; + + +/* The public CFE API */ + +int cfe_present(void); /* Check if we booted from CFE. Returns bool */ + +int cfe_getticks(s64 *ticks); +int cfe_close(int handle); +int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1); +int cfe_cpu_stop(int cpu); +int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen); +int cfe_enumdev(int idx, char *name, int namelen); +int cfe_enummem(int idx, int flags, u64 *start, u64 *length, + u64 *type); +int cfe_exit(int warm, int status); +int cfe_flushcache(int flags); +int cfe_getdevinfo(char *name); +int cfe_getenv(char *name, char *dest, int destlen); +int cfe_getfwinfo(struct cfe_fwinfo *info); +int cfe_getstdhandle(int handletype); +int cfe_inpstat(int handle); +int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, + int length, int *retlen, u64 offset); +int cfe_open(char *name); +int cfe_read(int handle, unsigned char *buffer, int length); +int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length); +int cfe_setenv(char *name, char *val); +int cfe_write(int handle, unsigned char *buffer, int length); +int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, + int length); + + +/* High level API */ + +/* Print some information to CFE's console (most likely serial line) */ +int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2))); +int cfe_vprintk(const char *fmt, va_list args); + + + +/* Error codes returned by the low API functions */ + +#define CFE_ISERR(errcode) (errcode < 0) + +#define CFE_OK 0 +#define CFE_ERR -1 /* generic error */ +#define CFE_ERR_INV_COMMAND -2 +#define CFE_ERR_EOF -3 +#define CFE_ERR_IOERR -4 +#define CFE_ERR_NOMEM -5 +#define CFE_ERR_DEVNOTFOUND -6 +#define CFE_ERR_DEVOPEN -7 +#define CFE_ERR_INV_PARAM -8 +#define CFE_ERR_ENVNOTFOUND -9 +#define CFE_ERR_ENVREADONLY -10 + +#define CFE_ERR_NOTELF -11 +#define CFE_ERR_NOT32BIT -12 +#define CFE_ERR_WRONGENDIAN -13 +#define CFE_ERR_BADELFVERS -14 +#define CFE_ERR_NOTMIPS -15 +#define CFE_ERR_BADELFFMT -16 +#define CFE_ERR_BADADDR -17 + +#define CFE_ERR_FILENOTFOUND -18 +#define CFE_ERR_UNSUPPORTED -19 + +#define CFE_ERR_HOSTUNKNOWN -20 + +#define CFE_ERR_TIMEOUT -21 + +#define CFE_ERR_PROTOCOLERR -22 + +#define CFE_ERR_NETDOWN -23 +#define CFE_ERR_NONAMESERVER -24 + +#define CFE_ERR_NOHANDLES -25 +#define CFE_ERR_ALREADYBOUND -26 + +#define CFE_ERR_CANNOTSET -27 +#define CFE_ERR_NOMORE -28 +#define CFE_ERR_BADFILESYS -29 +#define CFE_ERR_FSNOTAVAIL -30 + +#define CFE_ERR_INVBOOTBLOCK -31 +#define CFE_ERR_WRONGDEVTYPE -32 +#define CFE_ERR_BBCHECKSUM -33 +#define CFE_ERR_BOOTPROGCHKSUM -34 + +#define CFE_ERR_LDRNOTAVAIL -35 + +#define CFE_ERR_NOTREADY -36 + +#define CFE_ERR_GETMEM -37 +#define CFE_ERR_SETMEM -38 + +#define CFE_ERR_NOTCONN -39 +#define CFE_ERR_ADDRINUSE -40 + + +#endif /* LINUX_CFE_API_H_ */ diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h new file mode 100644 index 0000000000..3a6e00a2ae --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h @@ -0,0 +1,64 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __6338_INTR_H +#define __6338_INTR_H + +/*=====================================================================*/ +/* BCM6338 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6338 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) +#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) +#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) +#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) +#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) +#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) +#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) +#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) +#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) +#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) +#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) + +#endif /* __BCM6338_H */ + diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h new file mode 100644 index 0000000000..70bf807342 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h @@ -0,0 +1,334 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6338_MAP_H +#define __BCM6338_MAP_H + +#include "bcmtypes.h" + +#define PERF_BASE 0xfffe0000 +#define TIMR_BASE 0xfffe0200 +#define UART_BASE 0xfffe0300 +#define GPIO_BASE 0xfffe0400 +#define SPI_BASE 0xfffe0c00 + +typedef struct PerfControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define EMAC_CLK_EN 0x0010 +#define USBS_CLK_EN 0x0010 +#define SAR_CLK_EN 0x0020 + +#define SPI_CLK_EN 0x0200 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 5 +#define EI_CLEAR_SHFT 10 +#define EI_MASK_SHFT 15 +#define EI_INSENS_SHFT 20 +#define EI_LEVEL_SHFT 25 + + uint32 unused[4]; /* (18) */ + uint32 BlockSoftReset; /* (28) */ +#define BSR_SPI 0x00000001 +#define BSR_EMAC 0x00000004 +#define BSR_USBH 0x00000008 +#define BSR_USBS 0x00000010 +#define BSR_ADSL 0x00000020 +#define BSR_DMAMEM 0x00000040 +#define BSR_SAR 0x00000080 +#define BSR_ACLC 0x00000100 +#define BSR_ADSL_MIPS_PLL 0x00000400 +#define BSR_ALL_BLOCKS \ + (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ + BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) +} PerfControl; + +#define PERF ((volatile PerfControl * const) PERF_BASE) + + +typedef struct Timer { + uint16 unused0; + byte TimerMask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + byte TimerInts; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + uint32 TimerCtl0; + uint32 TimerCtl1; + uint32 TimerCtl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + uint32 TimerCnt0; + uint32 TimerCnt1; + uint32 TimerCnt2; + uint32 WatchDogDefCount; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + uint32 WatchDogCtl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + uint32 WDResetCount; +} Timer; + +#define TIMER ((volatile Timer * const) TIMR_BASE) +typedef struct UartChannel { + byte unused0; + byte control; +#define BRGEN 0x80 /* Control register bit defs */ +#define TXEN 0x40 +#define RXEN 0x20 +#define LOOPBK 0x10 +#define TXPARITYEN 0x08 +#define TXPARITYEVEN 0x04 +#define RXPARITYEN 0x02 +#define RXPARITYEVEN 0x01 + + byte config; +#define XMITBREAK 0x40 +#define BITS5SYM 0x00 +#define BITS6SYM 0x10 +#define BITS7SYM 0x20 +#define BITS8SYM 0x30 +#define ONESTOP 0x07 +#define TWOSTOP 0x0f + /* 4-LSBS represent STOP bits/char + * in 1/8 bit-time intervals. Zero + * represents 1/8 stop bit interval. + * Fifteen represents 2 stop bits. + */ + byte fifoctl; +#define RSTTXFIFOS 0x80 +#define RSTRXFIFOS 0x40 + /* 5-bit TimeoutCnt is in low bits of this register. + * This count represents the number of characters + * idle times before setting receive Irq when below threshold + */ + uint32 baudword; + /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate + */ + + byte txf_levl; /* Read-only fifo depth */ + byte rxf_levl; /* Read-only fifo depth */ + byte fifocfg; /* Upper 4-bits are TxThresh, Lower are + * RxThreshold. Irq can be asserted + * when rx fifo> thresh, txfifo +*/ + +#ifndef __6345_INTR_H +#define __6345_INTR_H + + +/*=====================================================================*/ +/* BCM6345 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6345 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 +#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +/* Internal peripheral interrupt IDs */ +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) + +/* DMA channel interrupt IDs */ +#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) +#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) +#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) +#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) +#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) +#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) +#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) +#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) +#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) +#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) +#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) +#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) + + +#endif /* __BCM6345_H */ + diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h new file mode 100644 index 0000000000..78e59a4399 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h @@ -0,0 +1,163 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6345_MAP_H +#define __BCM6345_MAP_H + + +#include "bcmtypes.h" +#include "6345_intr.h" + +typedef struct IntControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define USB_CLK_EN 0x0100 +#define EMAC_CLK_EN 0x0080 +#define UART_CLK_EN 0x0008 +#define CPU_CLK_EN 0x0001 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 4 +#define EI_CLEAR_SHFT 8 +#define EI_MASK_SHFT 12 +#define EI_INSENS_SHFT 16 +#define EI_LEVEL_SHFT 20 +} IntControl; + +#define INTC_BASE 0xfffe0000 +#define PERF ((volatile IntControl * const) INTC_BASE) + +#define TIMR_BASE 0xfffe0200 +typedef struct Timer { + uint16 unused0; + byte TimerMask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + byte TimerInts; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + uint32 TimerCtl0; + uint32 TimerCtl1; + uint32 TimerCtl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + uint32 TimerCnt0; + uint32 TimerCnt1; + uint32 TimerCnt2; + uint32 WatchDogDefCount; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + uint32 WatchDogCtl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + uint32 WDResetCount; +} Timer; + +#define TIMER ((volatile Timer * const) TIMR_BASE) + +typedef struct UartChannel { + byte unused0; + byte control; +#define BRGEN 0x80 /* Control register bit defs */ +#define TXEN 0x40 +#define RXEN 0x20 +#define TXPARITYEN 0x08 +#define TXPARITYEVEN 0x04 +#define RXPARITYEN 0x02 +#define RXPARITYEVEN 0x01 + byte config; +#define BITS5SYM 0x00 +#define BITS6SYM 0x10 +#define BITS7SYM 0x20 +#define BITS8SYM 0x30 +#define XMITBREAK 0x40 +#define ONESTOP 0x07 +#define TWOSTOP 0x0f + + byte fifoctl; +#define RSTTXFIFOS 0x80 +#define RSTRXFIFOS 0x40 + uint32 baudword; + + byte txf_levl; + byte rxf_levl; + byte fifocfg; + byte prog_out; + + byte unused1; + byte DeltaIPEdgeNoSense; + byte DeltaIPConfig_Mask; + byte DeltaIP_SyncIP; + uint16 intMask; + uint16 intStatus; +#define TXUNDERR 0x0002 +#define TXOVFERR 0x0004 +#define TXFIFOEMT 0x0020 +#define RXOVFERR 0x0080 +#define RXFIFONE 0x0800 +#define RXFRAMERR 0x1000 +#define RXPARERR 0x2000 +#define RXBRK 0x4000 + + uint16 unused2; + uint16 Data; + uint32 unused3; + uint32 unused4; +} Uart; + +#define UART_BASE 0xfffe0300 +#define UART ((volatile Uart * const) UART_BASE) + +typedef struct GpioControl { + uint16 unused0; + byte unused1; + byte TBusSel; + + uint16 unused2; + uint16 GPIODir; + byte unused3; + byte Leds; + uint16 GPIOio; + + uint32 UartCtl; +} GpioControl; + +#define GPIO_BASE 0xfffe0400 +#define GPIO ((volatile GpioControl * const) GPIO_BASE) + +#define GPIO_NUM_MAX_BITS_MASK 0x0f +#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) + + +#endif + diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h new file mode 100644 index 0000000000..da3ee9fc34 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h @@ -0,0 +1,74 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __6348_INTR_H +#define __6348_INTR_H + + +/*=====================================================================*/ +/* BCM6348 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6348 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) +#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) +#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) +#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) +#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) +#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) +#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) +#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) +#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) +#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) +#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) +#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) +#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) +#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) +#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) +#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) +#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) +#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) +#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) + + +#endif /* __BCM6348_H */ + diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h new file mode 100644 index 0000000000..199ef9e15e --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h @@ -0,0 +1,500 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6348_MAP_H +#define __BCM6348_MAP_H + +#include "bcmtypes.h" + +#define PERF_BASE 0xfffe0000 +#define TIMR_BASE 0xfffe0200 +#define UART_BASE 0xfffe0300 +#define GPIO_BASE 0xfffe0400 +#define MPI_BASE 0xfffe2000 /* MPI control registers */ +#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ +#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ + +typedef struct PerfControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define EMAC_CLK_EN 0x0010 +#define SAR_CLK_EN 0x0020 +#define USBS_CLK_EN 0x0040 +#define USBH_CLK_EN 0x0100 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 5 +#define EI_CLEAR_SHFT 10 +#define EI_MASK_SHFT 15 +#define EI_INSENS_SHFT 20 +#define EI_LEVEL_SHFT 25 + + uint32 unused[4]; /* (18) */ + uint32 BlockSoftReset; /* (28) */ +#define BSR_SPI 0x00000001 +#define BSR_EMAC 0x00000004 +#define BSR_USBH 0x00000008 +#define BSR_USBS 0x00000010 +#define BSR_ADSL 0x00000020 +#define BSR_DMAMEM 0x00000040 +#define BSR_SAR 0x00000080 +#define BSR_ACLC 0x00000100 +#define BSR_ADSL_MIPS_PLL 0x00000400 +#define BSR_ALL_BLOCKS \ + (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ + BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) + uint32 unused2[2]; /* (2c) */ + uint32 PllStrap; /* (34) */ +#define PLL_N1_SHFT 20 +#define PLL_N1_MASK (7< thresh, txfifo= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) + + +/* +** External Bus Interface +*/ +typedef struct EbiChipSelect { + uint32 base; /* base address in upper 24 bits */ +#define EBI_SIZE_8K 0 +#define EBI_SIZE_16K 1 +#define EBI_SIZE_32K 2 +#define EBI_SIZE_64K 3 +#define EBI_SIZE_128K 4 +#define EBI_SIZE_256K 5 +#define EBI_SIZE_512K 6 +#define EBI_SIZE_1M 7 +#define EBI_SIZE_2M 8 +#define EBI_SIZE_4M 9 +#define EBI_SIZE_8M 10 +#define EBI_SIZE_16M 11 +#define EBI_SIZE_32M 12 +#define EBI_SIZE_64M 13 +#define EBI_SIZE_128M 14 +#define EBI_SIZE_256M 15 + uint32 config; +#define EBI_ENABLE 0x00000001 /* .. enable this range */ +#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ +#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ +#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ +#define EBI_WREN 0x00000020 /* enable posted writes */ +#define EBI_POLARITY 0x00000040 /* .. set to invert something, + ** don't know what yet */ +#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ +#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ +#define EBI_FIFO 0x00000200 /* .. use fifo */ +#define EBI_RE 0x00000400 /* .. Reverse Endian */ +} EbiChipSelect; + +typedef struct MpiRegisters { + EbiChipSelect cs[7]; /* size chip select configuration */ +#define EBI_CS0_BASE 0 +#define EBI_CS1_BASE 1 +#define EBI_CS2_BASE 2 +#define EBI_CS3_BASE 3 +#define PCMCIA_COMMON_BASE 4 +#define PCMCIA_ATTRIBUTE_BASE 5 +#define PCMCIA_IO_BASE 6 + uint32 unused0[2]; /* reserved */ + uint32 ebi_control; /* ebi control */ + uint32 unused1[4]; /* reserved */ +#define EBI_ACCESS_TIMEOUT 0x000007FF + uint32 pcmcia_cntl1; /* pcmcia control 1 */ +#define PCCARD_CARD_RESET 0x00040000 +#define CARDBUS_ENABLE 0x00008000 +#define PCMCIA_ENABLE 0x00004000 +#define PCMCIA_GPIO_ENABLE 0x00002000 +#define CARDBUS_IDSEL 0x00001F00 +#define VS2_OEN 0x00000080 +#define VS1_OEN 0x00000040 +#define VS2_OUT 0x00000020 +#define VS1_OUT 0x00000010 +#define VS2_IN 0x00000008 +#define VS1_IN 0x00000004 +#define CD2_IN 0x00000002 +#define CD1_IN 0x00000001 +#define VS_MASK 0x0000000C +#define CD_MASK 0x00000003 + uint32 unused2; /* reserved */ + uint32 pcmcia_cntl2; /* pcmcia control 2 */ +#define PCMCIA_BYTESWAP_DIS 0x00000002 +#define PCMCIA_HALFWORD_EN 0x00000001 +#define RW_ACTIVE_CNT_BIT 2 +#define INACTIVE_CNT_BIT 8 +#define CE_SETUP_CNT_BIT 16 +#define CE_HOLD_CNT_BIT 24 + uint32 unused3[40]; /* reserved */ + + uint32 sp0range; /* PCI to internal system bus address space */ + uint32 sp0remap; + uint32 sp0cfg; + uint32 sp1range; + uint32 sp1remap; + uint32 sp1cfg; + + uint32 EndianCfg; + + uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ +#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ +#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ +#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ +#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ +#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ +#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ + + uint32 l2pmrange1; /* internal system bus to PCI memory space */ +#define PCI_SIZE_64K 0xFFFF0000 +#define PCI_SIZE_128K 0xFFFE0000 +#define PCI_SIZE_256K 0xFFFC0000 +#define PCI_SIZE_512K 0xFFF80000 +#define PCI_SIZE_1M 0xFFF00000 +#define PCI_SIZE_2M 0xFFE00000 +#define PCI_SIZE_4M 0xFFC00000 +#define PCI_SIZE_8M 0xFF800000 +#define PCI_SIZE_16M 0xFF000000 +#define PCI_SIZE_32M 0xFE000000 + uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ + uint32 l2pmremap1; +#define CARDBUS_MEM 0x00000004 +#define MEM_WINDOW_EN 0x00000001 + uint32 l2pmrange2; + uint32 l2pmbase2; + uint32 l2pmremap2; + uint32 l2piorange; /* internal system bus to PCI I/O space */ + uint32 l2piobase; + uint32 l2pioremap; + + uint32 pcimodesel; +#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 +#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ +#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ + + uint32 pciintstat; /* PCI interrupt mask/status */ +#define MAILBOX1_SENT 0x08 +#define MAILBOX0_SENT 0x04 +#define MAILBOX1_MSG_RCV 0x02 +#define MAILBOX0_MSG_RCV 0x01 + uint32 locbuscntrl; /* internal system bus control */ +#define DIR_U2P_NOSWAP 0x00000002 +#define EN_PCI_GPIO 0x00000001 + uint32 locintstat; /* internal system bus interrupt mask/status */ +#define CSERR 0x0200 +#define SERR 0x0100 +#define EXT_PCI_INT 0x0080 +#define DIR_FAILED 0x0040 +#define DIR_COMPLETE 0x0020 +#define PCI_CFG 0x0010 + uint32 unused5[7]; + + uint32 mailbox0; + uint32 mailbox1; + + uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ +#define PCI_CFG_REG_WRITE_EN 0x00000080 +#define PCI_CFG_ADDR 0x0000003C + uint32 pcicfgdata; /* internal system bus PCI configuration data */ + + uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ +#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ +#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ +#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ +#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ + uint32 locch2intStat; +#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ +#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ +#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ + uint32 locch2intMask; + uint32 unused6; + uint32 locch2descaddr; + uint32 locch2status1; +#define LOCAL_DESC_STATE 0xE0000000 +#define PCI_DESC_STATE 0x1C000000 +#define BYTE_DONE 0x03FFC000 +#define RING_ADDR 0x00003FFF + uint32 locch2status2; +#define BUFPTR_OFFSET 0x1FFF0000 +#define PCI_MASTER_STATE 0x000000C0 +#define LOC_MASTER_STATE 0x00000038 +#define CONTROL_STATE 0x00000007 + uint32 unused7; + + uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ +#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ +#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ + uint32 locch1intstat; + uint32 locch1intmask; + uint32 unused8; + uint32 locch1descaddr; + uint32 locch1status1; + uint32 locch1status2; + uint32 unused9; + + uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ + uint32 pcich1intstat; + uint32 pcich1intmask; + uint32 pcich1descaddr; + uint32 pcich1status1; + uint32 pcich1status2; + + uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ + uint32 pcich2intstat; + uint32 pcich2intmask; + uint32 pcich2descaddr; + uint32 pcich2status1; + uint32 pcich2status2; + + uint32 perm_id; /* permanent device and vendor id */ + uint32 perm_rev; /* permanent revision id */ +} MpiRegisters; + +#define MPI ((volatile MpiRegisters * const) MPI_BASE) + +/* PCI configuration address space start offset 0x40 */ +#define BRCM_PCI_CONFIG_TIMER 0x40 +#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 +#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF + +/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ +#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ +#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ + +#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) + +#endif + diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h new file mode 100644 index 0000000000..e902e96aa3 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h @@ -0,0 +1,153 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +//************************************************************************************** +// File Name : bcmTag.h +// +// Description: add tag with validation system to the firmware image file to be uploaded +// via http +// +// Created : 02/28/2002 seanl +//************************************************************************************** + +#ifndef _BCMTAG_H_ +#define _BCMTAG_H_ + + +#define BCM_SIG_1 "Broadcom Corporation" +#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. + +#define BCM_TAG_VER "6" +#define BCM_TAG_VER_LAST "26" + +// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars +#define TAG_LEN 256 +#define TAG_VER_LEN 4 +#define SIG_LEN 20 +#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID +#define CHIP_ID_LEN 6 +#define IMAGE_LEN 10 +#define ADDRESS_LEN 12 +#define FLAG_LEN 2 +#define TOKEN_LEN 20 +#define BOARD_ID_LEN 16 +#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ + (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) + + +// TAG for downloadable image (kernel plus file system) +typedef struct _FILE_TAG +{ + unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. + unsigned char signiture_1[SIG_LEN]; // text line for company info + unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) + unsigned char chipId[CHIP_ID_LEN]; // chip id + unsigned char boardId[BOARD_ID_LEN]; // board id + unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host + unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length + unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address + unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. + unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address + unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. + unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address + unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. + unsigned char dualImage[FLAG_LEN]; // if 1, dual image + unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active + unsigned char reserved[RESERVED_LEN]; // reserved for later use + unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for + // now will be 4 unsigned char crc + unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) +} FILE_TAG, *PFILE_TAG; + +#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ +#define CRC_LEN 4 + +// only included if for bcmTag.exe program +#ifdef BCMTAG_EXE_USE + +static unsigned long Crc32_table[256] = { + 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D +}; +#endif // BCMTAG_USE + + +#endif // _BCMTAG_H_ + diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h new file mode 100644 index 0000000000..8c56840f42 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h @@ -0,0 +1,59 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM_INTR_H +#define __BCM_INTR_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(CONFIG_BCM96338) +#include <6338_intr.h> +#endif +#if defined(CONFIG_BCM96345) +#include <6345_intr.h> +#endif +#if defined(CONFIG_BCM96348) +#include <6348_intr.h> +#endif + +/* defines */ +struct pt_regs; +typedef int (*FN_HANDLER) (int, void *); + +/* prototypes */ +extern void enable_brcm_irq(unsigned int irq); +extern void disable_brcm_irq(unsigned int irq); +extern int request_external_irq(unsigned int irq, + FN_HANDLER handler, unsigned long irqflags, + const char * devname, void *dev_id); +extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, + unsigned int interruptId); +extern void dump_intr_regs(void); + +/* compatibility definitions */ +#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) +#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h new file mode 100644 index 0000000000..ccfe965dc3 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h @@ -0,0 +1,34 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM_MAP_PART_H +#define __BCM_MAP_PART_H + +#if defined(CONFIG_BCM96338) +#include <6338_map_part.h> +#endif +#if defined(CONFIG_BCM96345) +#include <6345_map_part.h> +#endif +#if defined(CONFIG_BCM96348) +#include <6348_map_part.h> +#endif + +#endif + diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h new file mode 100644 index 0000000000..cecbd995a4 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h @@ -0,0 +1,87 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +// +// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition +// +#ifndef BCMPCI_H +#define BCMPCI_H + +/* Memory window in internal system bus address space */ +#define BCM_PCI_MEM_BASE 0x08000000 +/* IO window in internal system bus address space */ +#define BCM_PCI_IO_BASE 0x0C000000 + +#define BCM_PCI_ADDR_MASK 0x1fffffff + +/* Memory window size (range) */ +#define BCM_PCI_MEM_SIZE_16MB 0x01000000 +/* IO window size (range) */ +#define BCM_PCI_IO_SIZE_64KB 0x00010000 + +/* PCI Configuration and I/O space acesss */ +#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) + +/* fake USB PCI slot */ +#define USB_HOST_SLOT 9 +#define USB_BAR0_MEM_SIZE 0x0800 + +#define BCM_HOST_MEM_SPACE1 0x10000000 +#define BCM_HOST_MEM_SPACE2 0x00000000 + +/* + * EBI bus clock is 33MHz and share with PCI bus + * each clock cycle is 30ns. + */ +/* attribute memory access wait cnt for 4306 */ +#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns +#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns +#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) +#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns + +/* common memory access wait cnt for 4306 */ +#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns +#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns +#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) +#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns + +#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also +#define PCCARD_VCC_33V 0x00010000 +#define PCCARD_VCC_50V 0x00020000 + +typedef enum { + MPI_CARDTYPE_NONE, // No Card in slot + MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot + MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot +} CardType; + +#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus + +#define pcmciaAttrOffset 0x00200000 +#define pcmciaMemOffset 0x00000000 +// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. +#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) +// Base Address is that mapped into the MPI ChipSelect registers. +// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. +#define pcmciaBase 0xbf000000 +#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) +#define pcmciaMem (pcmciaMemOffset | pcmciaBase) +#define pcmciaIo (pcmciaIoOffset | pcmciaBase) + +#endif diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h new file mode 100644 index 0000000000..43aebc9c06 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h @@ -0,0 +1,160 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +// +// bcmtypes.h - misc useful typedefs +// +#ifndef BCMTYPES_H +#define BCMTYPES_H + +// These are also defined in typedefs.h in the application area, so I need to +// protect against re-definition. + +#ifndef _TYPEDEFS_H_ +typedef unsigned char uint8; +typedef unsigned short uint16; +typedef unsigned long uint32; +typedef signed char int8; +typedef signed short int16; +typedef signed long int32; +#endif + +typedef unsigned char byte; +// typedef unsigned long sem_t; + +typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; +typedef signed long LONG,*PLONG; + +typedef unsigned int *PUINT; +typedef signed int INT; + +typedef unsigned short *PUSHORT; +typedef signed short SHORT,*PSHORT; +typedef unsigned short WORD,*PWORD; + +typedef unsigned char *PUCHAR; +typedef signed char *PCHAR; + +typedef void *PVOID; + +typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; + +typedef unsigned char BYTE,*PBYTE; + +//#ifndef __GNUC__ +//The following has been defined in Vxworks internally: vxTypesOld.h +//redefine under vxworks will cause error +typedef signed int *PINT; + +typedef signed char INT8; +typedef signed short INT16; +typedef signed long INT32; + +typedef unsigned char UINT8; +typedef unsigned short UINT16; +typedef unsigned long UINT32; + +typedef unsigned char UCHAR; +typedef unsigned short USHORT; +typedef unsigned int UINT; +typedef unsigned long ULONG; + +typedef void VOID; +typedef unsigned char BOOL; + +//#endif /* __GNUC__ */ + + +// These are also defined in typedefs.h in the application area, so I need to +// protect against re-definition. +#ifndef TYPEDEFS_H + +// Maximum and minimum values for a signed 16 bit integer. +#define MAX_INT16 32767 +#define MIN_INT16 -32768 + +// Useful for true/false return values. This uses the +// Taligent notation (k for constant). +typedef enum +{ + kFalse = 0, + kTrue = 1 +} Bool; + +#endif + +/* macros to protect against unaligned accesses */ + +#if 0 +/* first arg is an address, second is a value */ +#define PUT16( a, d ) { \ + *((byte *)a) = (byte)((d)>>8); \ + *(((byte *)a)+1) = (byte)(d); \ +} + +#define PUT32( a, d ) { \ + *((byte *)a) = (byte)((d)>>24); \ + *(((byte *)a)+1) = (byte)((d)>>16); \ + *(((byte *)a)+2) = (byte)((d)>>8); \ + *(((byte *)a)+3) = (byte)(d); \ +} + +/* first arg is an address, returns a value */ +#define GET16( a ) ( \ + (*((byte *)a) << 8) | \ + (*(((byte *)a)+1)) \ +) + +#define GET32( a ) ( \ + (*((byte *)a) << 24) | \ + (*(((byte *)a)+1) << 16) | \ + (*(((byte *)a)+2) << 8) | \ + (*(((byte *)a)+3)) \ +) +#endif + +#ifndef YES +#define YES 1 +#endif + +#ifndef NO +#define NO 0 +#endif + +#ifndef IN +#define IN +#endif + +#ifndef OUT +#define OUT +#endif + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef FALSE +#define FALSE 0 +#endif + +#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) +#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) +#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) + +#endif diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/board.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/board.h new file mode 100644 index 0000000000..e674cb10d7 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/board.h @@ -0,0 +1,373 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/***********************************************************************/ +/* */ +/* MODULE: board.h */ +/* DATE: 97/02/18 */ +/* PURPOSE: Board specific information. This module should include */ +/* all base device addresses and board specific macros. */ +/* */ +/***********************************************************************/ +#ifndef _BOARD_H +#define _BOARD_H + +/*****************************************************************************/ +/* Misc board definitions */ +/*****************************************************************************/ + +#define DYING_GASP_API + +/*****************************************************************************/ +/* Physical Memory Map */ +/*****************************************************************************/ + +#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ +#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ + +/*****************************************************************************/ +/* Note that the addresses above are physical addresses and that programs */ +/* have to use converted addresses defined below: */ +/*****************************************************************************/ +#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ +#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ +#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ + +/*****************************************************************************/ +/* Select the PLL value to get the desired CPU clock frequency. */ +/* */ +/* */ +/*****************************************************************************/ +#define FPERIPH 50000000 + +#define ONEK 1024 +#define BLK64K (64*ONEK) +#define FLASH45_BLKS_BOOT_ROM 1 +#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) +#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ + +/*****************************************************************************/ +/* Note that the addresses above are physical addresses and that programs */ +/* have to use converted addresses defined below: */ +/*****************************************************************************/ +#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ +#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ +#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ + +/*****************************************************************************/ +/* Select the PLL value to get the desired CPU clock frequency. */ +/* */ +/* */ +/*****************************************************************************/ +#define FPERIPH 50000000 + +#define SDRAM_TYPE_ADDRESS_OFFSET 16 +#define NVRAM_DATA_OFFSET 0x0580 +#define NVRAM_DATA_ID 0x0f1e2d3c +#define BOARD_SDRAM_TYPE *(unsigned long *) \ + (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) + +#define ONEK 1024 +#define BLK64K (64*ONEK) + +// nvram and psi flash definitions for 45 +#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram +#define NVRAM_PSI_DEFAULT 24 // default psi in K byes + +/*****************************************************************************/ +/* NVRAM Offset and definition */ +/*****************************************************************************/ + +#define NVRAM_VERSION_NUMBER 2 +#define NVRAM_VERSION_NUMBER_ADDRESS 0 + +#define NVRAM_BOOTLINE_LEN 256 +#define NVRAM_BOARD_ID_STRING_LEN 16 +#define NVRAM_MAC_ADDRESS_LEN 6 +#define NVRAM_MAC_COUNT_MAX 32 + +/*****************************************************************************/ +/* Misc Offsets */ +/*****************************************************************************/ + +#define CFE_VERSION_OFFSET 0x0570 +#define CFE_VERSION_MARK_SIZE 5 +#define CFE_VERSION_SIZE 5 + +typedef struct +{ + unsigned long ulVersion; + char szBootline[NVRAM_BOOTLINE_LEN]; + char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; + unsigned long ulReserved1[2]; + unsigned long ulNumMacAddrs; + unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; + char chReserved[2]; + unsigned long ulCheckSum; +} NVRAM_DATA, *PNVRAM_DATA; + + +/*****************************************************************************/ +/* board ioctl calls for flash, led and some other utilities */ +/*****************************************************************************/ + + +/* Defines. for board driver */ +#define BOARD_IOCTL_MAGIC 'B' +#define BOARD_DRV_MAJOR 206 + +#define MAC_ADDRESS_ANY (unsigned long) -1 + +#define BOARD_IOCTL_FLASH_INIT \ + _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_FLASH_WRITE \ + _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_FLASH_READ \ + _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_NR_PAGES \ + _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_DUMP_ADDR \ + _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_MEMORY \ + _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_MIPS_SOFT_RESET \ + _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_LED_CTRL \ + _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_ID \ + _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_PSI_SIZE \ + _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_SDRAM_SIZE \ + _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_MONITOR_FD \ + _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ + _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_BOOTLINE \ + _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_BOOTLINE \ + _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_CHIP_ID \ + _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_NUM_ENET \ + _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_CFE_VER \ + _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_ENET_CFG \ + _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ + _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_SES_LED \ + _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) + +//<>JUNHON, 2004/09/15 + +// for the action in BOARD_IOCTL_PARMS for flash operation +typedef enum +{ + PERSISTENT, + NVRAM, + BCM_IMAGE_CFE, + BCM_IMAGE_FS, + BCM_IMAGE_KERNEL, + BCM_IMAGE_WHOLE, + SCRATCH_PAD, + FLASH_SIZE, +} BOARD_IOCTL_ACTION; + + +typedef struct boardIoctParms +{ + char *string; + char *buf; + int strLen; + int offset; + BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ + int result; +} BOARD_IOCTL_PARMS; + + +// LED defines +typedef enum +{ + kLedAdsl, + kLedWireless, + kLedUsb, + kLedHpna, + kLedWanData, + kLedPPP, + kLedVoip, + kLedSes, + kLedLan, + kLedSelfTest, + kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. +} BOARD_LED_NAME; + +typedef enum +{ + kLedStateOff, /* turn led off */ + kLedStateOn, /* turn led on */ + kLedStateFail, /* turn led on red */ + kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ + kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ + kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ +} BOARD_LED_STATE; + + +// virtual and physical map pair defined in board.c +typedef struct ledmappair +{ + BOARD_LED_NAME ledName; // virtual led name + BOARD_LED_STATE ledInitState; // initial led state when the board boots. + unsigned short ledMask; // physical GPIO pin mask + unsigned short ledActiveLow; // reset bit to turn on LED + unsigned short ledMaskFail; // physical GPIO pin mask for state failure + unsigned short ledActiveLowFail;// reset bit to turn on LED +} LED_MAP_PAIR, *PLED_MAP_PAIR; + +typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); + +/* Flash storage address information that is determined by the flash driver. */ +typedef struct flashaddrinfo +{ + int flash_persistent_start_blk; + int flash_persistent_number_blk; + int flash_persistent_length; + unsigned long flash_persistent_blk_offset; + int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) + int flash_scratch_pad_number_blk; + int flash_scratch_pad_length; + unsigned long flash_scratch_pad_blk_offset; + int flash_nvram_start_blk; + int flash_nvram_number_blk; + int flash_nvram_length; + unsigned long flash_nvram_blk_offset; +} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; + +// scratch pad defines +/* SP - Persisten Scratch Pad format: + sp header : 32 bytes + tokenId-1 : 8 bytes + tokenId-1 len : 4 bytes + tokenId-1 data + .... + tokenId-n : 8 bytes + tokenId-n len : 4 bytes + tokenId-n data +*/ + +#define MAGIC_NUM_LEN 8 +#define MAGIC_NUMBER "gOGoBrCm" +#define TOKEN_NAME_LEN 16 +#define SP_VERSION 1 +#define SP_MAX_LEN 8 * 1024 // 8k buf before psi +#define SP_RESERVERD 16 + +typedef struct _SP_HEADER +{ + char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number + int SPVersion; // version number + int SPUsedLen; // used sp len + char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes +} SP_HEADER, *PSP_HEADER; + +typedef struct _TOKEN_DEF +{ + char tokenName[TOKEN_NAME_LEN]; + int tokenLen; +} SP_TOKEN, *PSP_TOKEN; + + +/*****************************************************************************/ +/* Function Prototypes */ +/*****************************************************************************/ +#if !defined(__ASM_ASM_H) +void dumpaddr( unsigned char *pAddr, int nLen ); + +int kerSysNvRamGet(char *string, int strLen, int offset); +int kerSysNvRamSet(char *string, int strLen, int offset); +int kerSysPersistentGet(char *string, int strLen, int offset); +int kerSysPersistentSet(char *string, int strLen, int offset); +int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); +int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); +int kerSysBcmImageSet( int flash_start_addr, char *string, int size); +int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); +int kerSysReleaseMacAddress( unsigned char *pucaAddr ); +int kerSysGetSdramSize( void ); +void kerSysGetBootline(char *string, int strLen); +void kerSysSetBootline(char *string, int strLen); +void kerSysMipsSoftReset(void); +void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); +void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); +int kerSysFlashSizeGet(void); +void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); +void kerSysDeregisterDyingGaspHandler(char *devname); +void kerSysWakeupMonitorTask( void ); +#endif + +#define BOOT_CFE 0 +#define BOOT_REDBOOT 1 + +extern int boot_loader_type; + +#endif /* _BOARD_H */ + diff --git a/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h new file mode 100644 index 0000000000..84eeafe856 --- /dev/null +++ b/target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h @@ -0,0 +1,6 @@ +#define ADSL_SDRAM_IMAGE_SIZE (384*1024) + +#define BOOT_LOADER_UNKNOWN 0 +#define BOOT_LOADER_CFE 1 +#define BOOT_LOADER_REDBOOT 2 +#define BOOT_LOADER_LAST 2 diff --git a/target/linux/brcm63xx-2.6/image/Makefile b/target/linux/brcm63xx-2.6/image/Makefile index 51c658a093..d930af8501 100644 --- a/target/linux/brcm63xx-2.6/image/Makefile +++ b/target/linux/brcm63xx-2.6/image/Makefile @@ -17,17 +17,32 @@ LOADER_MAKEOPTS= \ KERNEL_ENTRY=$(KERNEL_ENTRY) \ RAMSIZE=$(RAMSIZE) +define trxalign/jffs2-128k +-a 0x20000 +endef +define trxalign/jffs2-64k +-a 0x10000 +endef +define trxalign/squashfs +-a 1024 +endef + define Build/Clean - $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean + $(MAKE) -C lzma-loader clean endef define Image/Prepare cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean compile + rm -f $(KDIR)/loader.gz + $(MAKE) -C lzma-loader \ + BUILD_DIR="$(KDIR)" \ + TARGET="$(KDIR)" \ + clean install + echo -ne "\\x00" >> $(KDIR)/loader.gz endef define Image/Build - cp $(KDIR)/vmlinux $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img + $(STAGING_DIR)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1) endef $(eval $(call BuildImage)) diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/Makefile b/target/linux/brcm63xx-2.6/image/lzma-loader/Makefile new file mode 100644 index 0000000000..b56cbaab0f --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/Makefile @@ -0,0 +1,34 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME := lzma-loader +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) + +$(PKG_BUILD_DIR)/.prepared: + mkdir $(PKG_BUILD_DIR) + $(CP) ./src/* $(PKG_BUILD_DIR)/ + touch $@ + +$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared + $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \ + LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)" + +download: +prepare: $(PKG_BUILD_DIR)/.prepared +compile: $(PKG_BUILD_DIR)/loader.gz +install: + +ifneq ($(TARGET),) +install: compile + $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/ +endif + +clean: + rm -rf $(PKG_BUILD_DIR) diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.c b/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.c new file mode 100644 index 0000000000..951700bddf --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.c @@ -0,0 +1,663 @@ +/* + LzmaDecode.c + LZMA Decoder + + LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#include "LzmaDecode.h" + +#ifndef Byte +#define Byte unsigned char +#endif + +#define kNumTopBits 24 +#define kTopValue ((UInt32)1 << kNumTopBits) + +#define kNumBitModelTotalBits 11 +#define kBitModelTotal (1 << kNumBitModelTotalBits) +#define kNumMoveBits 5 + +typedef struct _CRangeDecoder +{ + Byte *Buffer; + Byte *BufferLim; + UInt32 Range; + UInt32 Code; + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback; + int Result; + #endif + int ExtraBytes; +} CRangeDecoder; + +Byte RangeDecoderReadByte(CRangeDecoder *rd) +{ + if (rd->Buffer == rd->BufferLim) + { + #ifdef _LZMA_IN_CB + UInt32 size; + rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); + rd->BufferLim = rd->Buffer + size; + if (size == 0) + #endif + { + rd->ExtraBytes = 1; + return 0xFF; + } + } + return (*rd->Buffer++); +} + +/* #define ReadByte (*rd->Buffer++) */ +#define ReadByte (RangeDecoderReadByte(rd)) + +void RangeDecoderInit(CRangeDecoder *rd, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + Byte *stream, UInt32 bufferSize + #endif + ) +{ + int i; + #ifdef _LZMA_IN_CB + rd->InCallback = inCallback; + rd->Buffer = rd->BufferLim = 0; + #else + rd->Buffer = stream; + rd->BufferLim = stream + bufferSize; + #endif + rd->ExtraBytes = 0; + rd->Code = 0; + rd->Range = (0xFFFFFFFF); + for(i = 0; i < 5; i++) + rd->Code = (rd->Code << 8) | ReadByte; +} + +#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; +#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; +#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } + +UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) +{ + RC_INIT_VAR + UInt32 result = 0; + int i; + for (i = numTotalBits; i > 0; i--) + { + /* UInt32 t; */ + range >>= 1; + + result <<= 1; + if (code >= range) + { + code -= range; + result |= 1; + } + /* + t = (code - range) >> 31; + t &= 1; + code -= range & (t - 1); + result = (result + result) | (1 - t); + */ + RC_NORMALIZE + } + RC_FLUSH_VAR + return result; +} + +int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) +{ + UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; + if (rd->Code < bound) + { + rd->Range = bound; + *prob += (kBitModelTotal - *prob) >> kNumMoveBits; + if (rd->Range < kTopValue) + { + rd->Code = (rd->Code << 8) | ReadByte; + rd->Range <<= 8; + } + return 0; + } + else + { + rd->Range -= bound; + rd->Code -= bound; + *prob -= (*prob) >> kNumMoveBits; + if (rd->Range < kTopValue) + { + rd->Code = (rd->Code << 8) | ReadByte; + rd->Range <<= 8; + } + return 1; + } +} + +#define RC_GET_BIT2(prob, mi, A0, A1) \ + UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ + if (code < bound) \ + { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ + else \ + { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ + RC_NORMALIZE + +#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) + +int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) +{ + int mi = 1; + int i; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + for(i = numLevels; i > 0; i--) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + mi; + RC_GET_BIT(prob, mi) + #else + mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); + #endif + } + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return mi - (1 << numLevels); +} + +int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) +{ + int mi = 1; + int i; + int symbol = 0; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + for(i = 0; i < numLevels; i++) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + mi; + RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) + #else + int bit = RangeDecoderBitDecode(probs + mi, rd); + mi = mi + mi + bit; + symbol |= (bit << i); + #endif + } + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) +{ + int symbol = 1; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + do + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + symbol; + RC_GET_BIT(prob, symbol) + #else + symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); + #endif + } + while (symbol < 0x100); + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) +{ + int symbol = 1; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + do + { + int bit; + int matchBit = (matchByte >> 7) & 1; + matchByte <<= 1; + #ifdef _LZMA_LOC_OPT + { + CProb *prob = probs + ((1 + matchBit) << 8) + symbol; + RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) + } + #else + bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); + symbol = (symbol << 1) | bit; + #endif + if (matchBit != bit) + { + while (symbol < 0x100) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + symbol; + RC_GET_BIT(prob, symbol) + #else + symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); + #endif + } + break; + } + } + while (symbol < 0x100); + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +#define kNumPosBitsMax 4 +#define kNumPosStatesMax (1 << kNumPosBitsMax) + +#define kLenNumLowBits 3 +#define kLenNumLowSymbols (1 << kLenNumLowBits) +#define kLenNumMidBits 3 +#define kLenNumMidSymbols (1 << kLenNumMidBits) +#define kLenNumHighBits 8 +#define kLenNumHighSymbols (1 << kLenNumHighBits) + +#define LenChoice 0 +#define LenChoice2 (LenChoice + 1) +#define LenLow (LenChoice2 + 1) +#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) +#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) +#define kNumLenProbs (LenHigh + kLenNumHighSymbols) + +int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) +{ + if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) + return RangeDecoderBitTreeDecode(p + LenLow + + (posState << kLenNumLowBits), kLenNumLowBits, rd); + if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) + return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + + (posState << kLenNumMidBits), kLenNumMidBits, rd); + return kLenNumLowSymbols + kLenNumMidSymbols + + RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); +} + +#define kNumStates 12 + +#define kStartPosModelIndex 4 +#define kEndPosModelIndex 14 +#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) + +#define kNumPosSlotBits 6 +#define kNumLenToPosStates 4 + +#define kNumAlignBits 4 +#define kAlignTableSize (1 << kNumAlignBits) + +#define kMatchMinLen 2 + +#define IsMatch 0 +#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) +#define IsRepG0 (IsRep + kNumStates) +#define IsRepG1 (IsRepG0 + kNumStates) +#define IsRepG2 (IsRepG1 + kNumStates) +#define IsRep0Long (IsRepG2 + kNumStates) +#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) +#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) +#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) +#define LenCoder (Align + kAlignTableSize) +#define RepLenCoder (LenCoder + kNumLenProbs) +#define Literal (RepLenCoder + kNumLenProbs) + +#if Literal != LZMA_BASE_SIZE +StopCompilingDueBUG +#endif + +#ifdef _LZMA_OUT_READ + +typedef struct _LzmaVarState +{ + CRangeDecoder RangeDecoder; + Byte *Dictionary; + UInt32 DictionarySize; + UInt32 DictionaryPos; + UInt32 GlobalPos; + UInt32 Reps[4]; + int lc; + int lp; + int pb; + int State; + int PreviousIsMatch; + int RemainLen; +} LzmaVarState; + +int LzmaDecoderInit( + unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + unsigned char *dictionary, UInt32 dictionarySize, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + unsigned char *inStream, UInt32 inSize + #endif + ) +{ + LzmaVarState *vs = (LzmaVarState *)buffer; + CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); + UInt32 i; + if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) + return LZMA_RESULT_NOT_ENOUGH_MEM; + vs->Dictionary = dictionary; + vs->DictionarySize = dictionarySize; + vs->DictionaryPos = 0; + vs->GlobalPos = 0; + vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; + vs->lc = lc; + vs->lp = lp; + vs->pb = pb; + vs->State = 0; + vs->PreviousIsMatch = 0; + vs->RemainLen = 0; + dictionary[dictionarySize - 1] = 0; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + RangeDecoderInit(&vs->RangeDecoder, + #ifdef _LZMA_IN_CB + inCallback + #else + inStream, inSize + #endif + ); + return LZMA_RESULT_OK; +} + +int LzmaDecode(unsigned char *buffer, + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + LzmaVarState *vs = (LzmaVarState *)buffer; + CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); + CRangeDecoder rd = vs->RangeDecoder; + int state = vs->State; + int previousIsMatch = vs->PreviousIsMatch; + Byte previousByte; + UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; + UInt32 nowPos = 0; + UInt32 posStateMask = (1 << (vs->pb)) - 1; + UInt32 literalPosMask = (1 << (vs->lp)) - 1; + int lc = vs->lc; + int len = vs->RemainLen; + UInt32 globalPos = vs->GlobalPos; + + Byte *dictionary = vs->Dictionary; + UInt32 dictionarySize = vs->DictionarySize; + UInt32 dictionaryPos = vs->DictionaryPos; + + if (len == -1) + { + *outSizeProcessed = 0; + return LZMA_RESULT_OK; + } + + while(len > 0 && nowPos < outSize) + { + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + len--; + } + if (dictionaryPos == 0) + previousByte = dictionary[dictionarySize - 1]; + else + previousByte = dictionary[dictionaryPos - 1]; +#else + +int LzmaDecode( + Byte *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + unsigned char *inStream, UInt32 inSize, + #endif + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); + CProb *p = (CProb *)buffer; + CRangeDecoder rd; + UInt32 i; + int state = 0; + int previousIsMatch = 0; + Byte previousByte = 0; + UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; + UInt32 nowPos = 0; + UInt32 posStateMask = (1 << pb) - 1; + UInt32 literalPosMask = (1 << lp) - 1; + int len = 0; + if (bufferSize < numProbs * sizeof(CProb)) + return LZMA_RESULT_NOT_ENOUGH_MEM; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + RangeDecoderInit(&rd, + #ifdef _LZMA_IN_CB + inCallback + #else + inStream, inSize + #endif + ); +#endif + + *outSizeProcessed = 0; + while(nowPos < outSize) + { + int posState = (int)( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & posStateMask); + #ifdef _LZMA_IN_CB + if (rd.Result != LZMA_RESULT_OK) + return rd.Result; + #endif + if (rd.ExtraBytes != 0) + return LZMA_RESULT_DATA_ERROR; + if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) + { + CProb *probs = p + Literal + (LZMA_LIT_SIZE * + ((( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & literalPosMask) << lc) + (previousByte >> (8 - lc)))); + + if (state < 4) state = 0; + else if (state < 10) state -= 3; + else state -= 6; + if (previousIsMatch) + { + Byte matchByte; + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + matchByte = dictionary[pos]; + #else + matchByte = outStream[nowPos - rep0]; + #endif + previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); + previousIsMatch = 0; + } + else + previousByte = LzmaLiteralDecode(probs, &rd); + outStream[nowPos++] = previousByte; + #ifdef _LZMA_OUT_READ + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #endif + } + else + { + previousIsMatch = 1; + if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) + { + if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) + { + if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) + { + #ifdef _LZMA_OUT_READ + UInt32 pos; + #endif + if ( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + == 0) + return LZMA_RESULT_DATA_ERROR; + state = state < 7 ? 9 : 11; + #ifdef _LZMA_OUT_READ + pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + continue; + } + } + else + { + UInt32 distance; + if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) + distance = rep1; + else + { + if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) + distance = rep2; + else + { + distance = rep3; + rep3 = rep2; + } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + len = LzmaLenDecode(p + RepLenCoder, &rd, posState); + state = state < 7 ? 8 : 11; + } + else + { + int posSlot; + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + state = state < 7 ? 7 : 10; + len = LzmaLenDecode(p + LenCoder, &rd, posState); + posSlot = RangeDecoderBitTreeDecode(p + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << + kNumPosSlotBits), kNumPosSlotBits, &rd); + if (posSlot >= kStartPosModelIndex) + { + int numDirectBits = ((posSlot >> 1) - 1); + rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); + if (posSlot < kEndPosModelIndex) + { + rep0 += RangeDecoderReverseBitTreeDecode( + p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); + } + else + { + rep0 += RangeDecoderDecodeDirectBits(&rd, + numDirectBits - kNumAlignBits) << kNumAlignBits; + rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); + } + } + else + rep0 = posSlot; + rep0++; + } + if (rep0 == (UInt32)(0)) + { + /* it's for stream version */ + len = -1; + break; + } + if (rep0 > nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + { + return LZMA_RESULT_DATA_ERROR; + } + len += kMatchMinLen; + do + { + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + len--; + } + while(len > 0 && nowPos < outSize); + } + } + + #ifdef _LZMA_OUT_READ + vs->RangeDecoder = rd; + vs->DictionaryPos = dictionaryPos; + vs->GlobalPos = globalPos + nowPos; + vs->Reps[0] = rep0; + vs->Reps[1] = rep1; + vs->Reps[2] = rep2; + vs->Reps[3] = rep3; + vs->State = state; + vs->PreviousIsMatch = previousIsMatch; + vs->RemainLen = len; + #endif + + *outSizeProcessed = nowPos; + return LZMA_RESULT_OK; +} diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.h b/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.h new file mode 100644 index 0000000000..f58944e3c3 --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.h @@ -0,0 +1,100 @@ +/* + LzmaDecode.h + LZMA Decoder interface + + LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#ifndef __LZMADECODE_H +#define __LZMADECODE_H + +/* #define _LZMA_IN_CB */ +/* Use callback for input data */ + +/* #define _LZMA_OUT_READ */ +/* Use read function for output data */ + +/* #define _LZMA_PROB32 */ +/* It can increase speed on some 32-bit CPUs, + but memory usage will be doubled in that case */ + +/* #define _LZMA_LOC_OPT */ +/* Enable local speed optimizations inside code */ + +#ifndef UInt32 +#ifdef _LZMA_UINT32_IS_ULONG +#define UInt32 unsigned long +#else +#define UInt32 unsigned int +#endif +#endif + +#ifdef _LZMA_PROB32 +#define CProb UInt32 +#else +#define CProb unsigned short +#endif + +#define LZMA_RESULT_OK 0 +#define LZMA_RESULT_DATA_ERROR 1 +#define LZMA_RESULT_NOT_ENOUGH_MEM 2 + +#ifdef _LZMA_IN_CB +typedef struct _ILzmaInCallback +{ + int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); +} ILzmaInCallback; +#endif + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +/* +bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) +bufferSize += 100 in case of _LZMA_OUT_READ +by default CProb is unsigned short, +but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) +*/ + +#ifdef _LZMA_OUT_READ +int LzmaDecoderInit( + unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + unsigned char *dictionary, UInt32 dictionarySize, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + unsigned char *inStream, UInt32 inSize + #endif +); +#endif + +int LzmaDecode( + unsigned char *buffer, + #ifndef _LZMA_OUT_READ + UInt32 bufferSize, + int lc, int lp, int pb, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + unsigned char *inStream, UInt32 inSize, + #endif + #endif + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed); + +#endif diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/Makefile b/target/linux/brcm63xx-2.6/image/lzma-loader/src/Makefile new file mode 100644 index 0000000000..85a864674b --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/Makefile @@ -0,0 +1,77 @@ +# +# Makefile for Broadcom BCM947XX boards +# +# Copyright 2001-2003, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# Copyright 2004 Manuel Novoa III +# Modified to support bzip'd kernels. +# Of course, it would be better to integrate bunzip capability into CFE. +# +# Copyright 2005 Oleg I. Vdovikin +# Cleaned up, modified for lzma support, removed from kernel +# + +TEXT_START := 0x80001000 +BZ_TEXT_START := 0x80300000 + +OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S + +CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ + -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ + -ffunction-sections -pipe -mlong-calls -fno-common \ + -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap +CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB + +ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START) + +SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/ + +OBJECTS := head.o data.o + +all: loader.gz loader.elf + +# Don't build dependencies, this may die if $(CC) isn't gcc +dep: + +install: + +loader.gz: loader + gzip -nc9 $< > $@ + +loader.elf: loader.o + cp $< $@ + +loader: loader.o + $(OBJCOPY) $< $@ + +loader.o: loader.lds $(OBJECTS) + $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS) + +loader.lds: loader.lds.in Makefile + @sed "$(SEDFLAGS)" < $< > $@ + +data.o: data.lds decompress.image + $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips + +data.lds: + @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@ + +decompress.image: decompress + $(OBJCOPY) $< $@ + +decompress: decompress.lds decompress.o LzmaDecode.o + $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o + +decompress.lds: decompress.lds.in Makefile + @sed "$(SEDFLAGS)" < $< > $@ + +mrproper: clean + +clean: + rm -f loader.gz loader decompress *.lds *.o *.image diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/README b/target/linux/brcm63xx-2.6/image/lzma-loader/src/README new file mode 100644 index 0000000000..16649e9500 --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/README @@ -0,0 +1,55 @@ +/* + * LZMA compressed kernel decompressor for bcm947xx boards + * + * Copyright (C) 2005 by Oleg I. Vdovikin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +The code is intended to decompress kernel, being compressed using lzma utility +build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory + +decompressor code expects that your .trx file consist of three partitions: + +1) decompressor itself (this is gziped code which pmon/cfe will extract and run +on boot-up instead of real kernel) +2) LZMA compressed kernel (both streamed and regular modes are supported now) +3) Root filesystem + +Please be sure to apply the following patch for use this new trx layout (it will +allow using both new and old trx files for root filesystem lookup code) + +--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 ++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 +@@ -221,7 +221,9 @@ + /* Try looking at TRX header for rootfs offset */ + if (le32_to_cpu(trx->magic) == TRX_MAGIC) { + bcm947xx_parts[1].offset = off; +- if (le32_to_cpu(trx->offsets[1]) > off) ++ if (le32_to_cpu(trx->offsets[2]) > off) ++ off = le32_to_cpu(trx->offsets[2]); ++ else if (le32_to_cpu(trx->offsets[1]) > off) + off = le32_to_cpu(trx->offsets[1]); + continue; + } + + +Revision history: + 0.02 Initial release + 0.03 Added Mineharu Takahara patch to pass actual + output size to decoder (stream mode compressed input is not + a requirement anymore) + 0.04 Reordered functions using lds script diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.c b/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.c new file mode 100644 index 0000000000..ec510e21e3 --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.c @@ -0,0 +1,175 @@ +/* + * LZMA compressed kernel decompressor for bcm947xx boards + * + * Copyright (C) 2005 by Oleg I. Vdovikin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * Please note, this was code based on the bunzip2 decompressor code + * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left + * is an idea and part of original vendor code + * + * + * 12-Mar-2005 Mineharu Takahara + * pass actual output size to decoder (stream mode + * compressed input is not a requirement anymore) + * + * 24-Apr-2005 Oleg I. Vdovikin + * reordered functions using lds script, removed forward decl + * + */ + +#include "LzmaDecode.h" + +#define BCM4710_FLASH 0x1fc00000 /* Flash */ + +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 + +#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) + +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 + +#define cache_unroll(base,op) \ + __asm__ __volatile__( \ + ".set noreorder;\n" \ + ".set mips3;\n" \ + "cache %1, (%0);\n" \ + ".set mips0;\n" \ + ".set reorder\n" \ + : \ + : "r" (base), \ + "i" (op)); + +static __inline__ void blast_icache(unsigned long size, unsigned long lsize) +{ + unsigned long start = KSEG0; + unsigned long end = (start + size); + + while(start < end) { + cache_unroll(start,Index_Invalidate_I); + start += lsize; + } +} + +static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) +{ + unsigned long start = KSEG0; + unsigned long end = (start + size); + + while(start < end) { + cache_unroll(start,Index_Writeback_Inv_D); + start += lsize; + } +} + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ + +struct trx_header { + unsigned int magic; /* "HDR0" */ + unsigned int len; /* Length of file including header */ + unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ + unsigned int flag_version; /* 0:15 flags, 16:31 version */ + unsigned int offsets[3]; /* Offsets of partitions from start of header */ +}; + +/* beyound the image end, size not known in advance */ +extern unsigned char workspace[]; + +unsigned int offset; +unsigned char *data; + +/* flash access should be aligned, so wrapper is used */ +/* read byte from the flash, all accesses are 32-bit aligned */ +static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) +{ + static unsigned int val; + + if (((unsigned int)offset % 4) == 0) { + val = *(unsigned int *)data; + data += 4; + } + + *bufferSize = 1; + *buffer = ((unsigned char *)&val) + (offset++ & 3); + + return LZMA_RESULT_OK; +} + +static __inline__ unsigned char get_byte(void) +{ + unsigned char *buffer; + UInt32 fake; + + return read_byte(0, &buffer, &fake), *buffer; +} + +/* should be the first function */ +void entry(unsigned long icache_size, unsigned long icache_lsize, + unsigned long dcache_size, unsigned long dcache_lsize) +{ + unsigned int i; /* temp value */ + unsigned int lc; /* literal context bits */ + unsigned int lp; /* literal pos state bits */ + unsigned int pb; /* pos state bits */ + unsigned int osize; /* uncompressed size */ + + ILzmaInCallback callback; + callback.Read = read_byte; + + /* look for trx header, 32-bit data access */ + for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH)); + ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536); + + /* compressed kernel is in the partition 0 or 1 */ + if (((struct trx_header *)data)->offsets[1] > 65536) + data += ((struct trx_header *)data)->offsets[0]; + else + data += ((struct trx_header *)data)->offsets[1]; + + offset = 0; + + /* lzma args */ + i = get_byte(); + lc = i % 9, i = i / 9; + lp = i % 5, pb = i / 5; + + /* skip rest of the LZMA coder property */ + for (i = 0; i < 4; i++) + get_byte(); + + /* read the lower half of uncompressed size in the header */ + osize = ((unsigned int)get_byte()) + + ((unsigned int)get_byte() << 8) + + ((unsigned int)get_byte() << 16) + + ((unsigned int)get_byte() << 24); + + /* skip rest of the header (upper half of uncompressed size) */ + for (i = 0; i < 4; i++) + get_byte(); + + /* decompress kernel */ + if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback, + (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK) + { + blast_dcache(dcache_size, dcache_lsize); + blast_icache(icache_size, icache_lsize); + + /* Jump to load address */ + ((void (*)(void)) LOADADDR)(); + } +} diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.lds.in b/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.lds.in new file mode 100644 index 0000000000..33f56f8a09 --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.lds.in @@ -0,0 +1,20 @@ +OUTPUT_ARCH(mips) +ENTRY(entry) +SECTIONS { + . = BZ_TEXT_START; + .text : { + *(.text.entry) + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } + + workspace = .; +} diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/head.S b/target/linux/brcm63xx-2.6/image/lzma-loader/src/head.S new file mode 100644 index 0000000000..9bfbd53d51 --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/head.S @@ -0,0 +1,155 @@ +/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ +/* cache manipulation adapted from Broadcom code */ +/* idea taken from original bunzip2 decompressor code */ +/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ +/* Licensed under the linux kernel's version of the GPL.*/ + +#include +#include + +#define KSEG0 0x80000000 + +#define C0_CONFIG $16 +#define C0_TAGLO $28 +#define C0_TAGHI $29 + +#define CONF1_DA_SHIFT 7 /* D$ associativity */ +#define CONF1_DA_MASK 0x00000380 +#define CONF1_DA_BASE 1 +#define CONF1_DL_SHIFT 10 /* D$ line size */ +#define CONF1_DL_MASK 0x00001c00 +#define CONF1_DL_BASE 2 +#define CONF1_DS_SHIFT 13 /* D$ sets/way */ +#define CONF1_DS_MASK 0x0000e000 +#define CONF1_DS_BASE 64 +#define CONF1_IA_SHIFT 16 /* I$ associativity */ +#define CONF1_IA_MASK 0x00070000 +#define CONF1_IA_BASE 1 +#define CONF1_IL_SHIFT 19 /* I$ line size */ +#define CONF1_IL_MASK 0x00380000 +#define CONF1_IL_BASE 2 +#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ +#define CONF1_IS_MASK 0x01c00000 +#define CONF1_IS_BASE 64 + +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 + + .text + LEAF(startup) + .set noreorder + + /* Copy decompressor code to the right place */ + li t2, BZ_TEXT_START + add a0, t2, 0 + la a1, code_start + la a2, code_stop +$L1: + lw t0, 0(a1) + sw t0, 0(a0) + add a1, 4 + add a0, 4 + blt a1, a2, $L1 + nop + + /* At this point we need to invalidate dcache and */ + /* icache before jumping to new code */ + +1: /* Get cache sizes */ + .set mips32 + mfc0 s0,C0_CONFIG,1 + .set mips0 + + li s1,CONF1_DL_MASK + and s1,s0 + beq s1,zero,nodc + nop + + srl s1,CONF1_DL_SHIFT + li t0,CONF1_DL_BASE + sll s1,t0,s1 /* s1 has D$ cache line size */ + + li s2,CONF1_DA_MASK + and s2,s0 + srl s2,CONF1_DA_SHIFT + addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ + + li t0,CONF1_DS_MASK + and t0,s0 + srl t0,CONF1_DS_SHIFT + li s3,CONF1_DS_BASE + sll s3,s3,t0 /* s3 has D$ sets per way */ + + multu s2,s3 /* sets/way * associativity */ + mflo t0 /* total cache lines */ + + multu s1,t0 /* D$ linesize * lines */ + mflo s2 /* s2 is now D$ size in bytes */ + + /* Initilize the D$: */ + mtc0 zero,C0_TAGLO + mtc0 zero,C0_TAGHI + + li t0,KSEG0 /* Just an address for the first $ line */ + addu t1,t0,s2 /* + size of cache == end */ + + .set mips3 +1: cache Index_Writeback_Inv_D,0(t0) + .set mips0 + bne t0,t1,1b + addu t0,s1 + +nodc: + /* Now we get to do it all again for the I$ */ + + move s3,zero /* just in case there is no icache */ + move s4,zero + + li t0,CONF1_IL_MASK + and t0,s0 + beq t0,zero,noic + nop + + srl t0,CONF1_IL_SHIFT + li s3,CONF1_IL_BASE + sll s3,t0 /* s3 has I$ cache line size */ + + li t0,CONF1_IA_MASK + and t0,s0 + srl t0,CONF1_IA_SHIFT + addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ + + li t0,CONF1_IS_MASK + and t0,s0 + srl t0,CONF1_IS_SHIFT + li s5,CONF1_IS_BASE + sll s5,t0 /* s5 has I$ sets per way */ + + multu s4,s5 /* sets/way * associativity */ + mflo t0 /* s4 is now total cache lines */ + + multu s3,t0 /* I$ linesize * lines */ + mflo s4 /* s4 is cache size in bytes */ + + /* Initilize the I$: */ + mtc0 zero,C0_TAGLO + mtc0 zero,C0_TAGHI + + li t0,KSEG0 /* Just an address for the first $ line */ + addu t1,t0,s4 /* + size of cache == end */ + + .set mips3 +1: cache Index_Invalidate_I,0(t0) + .set mips0 + bne t0,t1,1b + addu t0,s3 + +noic: + move a0,s3 /* icache line size */ + move a1,s4 /* icache size */ + move a2,s1 /* dcache line size */ + jal t2 + move a3,s2 /* dcache size */ + + .set reorder + END(startup) diff --git a/target/linux/brcm63xx-2.6/image/lzma-loader/src/loader.lds.in b/target/linux/brcm63xx-2.6/image/lzma-loader/src/loader.lds.in new file mode 100644 index 0000000000..20f2ea98ec --- /dev/null +++ b/target/linux/brcm63xx-2.6/image/lzma-loader/src/loader.lds.in @@ -0,0 +1,17 @@ +OUTPUT_ARCH(mips) +ENTRY(startup) +SECTIONS { + . = TEXT_START; + .text : { + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } +} diff --git a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch index 7267c942ae..42fc728ab7 100644 --- a/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch +++ b/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch @@ -1,45 +1,55 @@ diff -urN linux-2.6.19/arch/mips/Kconfig linux-2.6.19.new/arch/mips/Kconfig --- linux-2.6.19/arch/mips/Kconfig 2006-11-29 22:57:37.000000000 +0100 +++ linux-2.6.19.new/arch/mips/Kconfig 2006-12-16 18:46:31.000000000 +0100 -@@ -12,6 +12,15 @@ +@@ -4,6 +4,10 @@ + # Horrible source of confusion. Die, die, die ... + select EMBEDDED + ++config CFE ++ bool ++ # Common Firmware Environment ++ + mainmenu "Linux/MIPS Kernel Configuration" + + menu "Machine selection" +@@ -12,6 +12,18 @@ prompt "System type" default SGI_IP22 +config BCM963XX -+ bool "Support for the Broadcom boards" ++ bool "Support for Broadcom BCM963xx SoC" + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_HAS_CPU_MIPS32_R1 ++ select HW_HAS_PCI ++ select DMA_NONCOHERENT + select IRQ_CPU ++ select CFE + help + This is a fmaily of boards based on the Broadcom MIPS32 + config MIPS_MTX1 bool "4G Systems MTX-1 board" select DMA_NONCOHERENT -@@ -766,6 +775,7 @@ - - endchoice - -+source "arch/mips/bcm963xx/Kconfig" - source "arch/mips/ddb5xxx/Kconfig" - source "arch/mips/gt64120/ev64120/Kconfig" - source "arch/mips/jazz/Kconfig" diff -urN linux-2.6.19/arch/mips/Makefile linux-2.6.19.new/arch/mips/Makefile --- linux-2.6.19/arch/mips/Makefile 2006-12-16 17:36:29.000000000 +0100 +++ linux-2.6.19.new/arch/mips/Makefile 2006-12-16 18:46:31.000000000 +0100 -@@ -158,6 +158,15 @@ +@@ -158,6 +158,19 @@ # # -+# Broadcom board ++# Broadcom BCM963xx SoC +# +core-$(CONFIG_BCM963XX) += arch/mips/bcm963xx/ +cflags-$(CONFIG_BCM963XX) += -Iinclude/asm-mips/mach-bcm963xx -+cflags-$(CONFIG_BCM963XX) += -Iarch/mips/bcm963xx/include +load-$(CONFIG_BCM963XX) += 0xffffffff80010000 + + ++# ++# Common Firmware Environment ++# ++core-$(CONFIG_CFE) += arch/mips/cfe/ ++ +# # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. # @@ -105,7 +115,7 @@ diff -urN linux-2.6.19/arch/mips/mm/c-r4k.c linux-2.6.19.new/arch/mips/mm/c-r4k. + if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348) + { -+ printk("brcm mips: enabling icache and dcache...\n"); ++ printk("bcm963xx: enabling icache and dcache...\n"); + /* Enable caches */ + write_c0_diag(read_c0_diag() | 0xC0000000); + } @@ -133,7 +143,7 @@ diff -urN linux-2.6.19/arch/mips/pci/Makefile linux-2.6.19.new/arch/mips/pci/Mak obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o -+obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o ++obj-$(CONFIG_BCM963XX) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o # # These are still pretty much in the old state, watch, go blind. @@ -144,7 +154,7 @@ diff -urN linux-2.6.19/drivers/serial/Makefile linux-2.6.19.new/drivers/serial/M obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o -+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o ++obj-$(CONFIG_BCM963XX) += bcm63xx_cons.o diff -urN linux-2.6.19/include/asm-mips/bootinfo.h linux-2.6.19.new/include/asm-mips/bootinfo.h --- linux-2.6.19/include/asm-mips/bootinfo.h 2006-11-29 22:57:37.000000000 +0100 +++ linux-2.6.19.new/include/asm-mips/bootinfo.h 2006-12-16 18:46:31.000000000 +0100