From: Mintz, Yuval Date: Thu, 1 Jun 2017 12:29:10 +0000 (+0300) Subject: qed: Reset IGU CAM to default on init X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ebbdcc669c7f9d8632d358a739d814485f8917dc;p=openwrt%2Fstaging%2Fblogic.git qed: Reset IGU CAM to default on init The IGU CAM contains an assocaition between hardware SBs and interrupt lines, and it can be dynamically configured to allow more interrupts in one entity over another, specifically for Re-distibution of SBs between a PF and its child VFs. While we don't yet use this functionality, there are other clients that do and as such its possible the information passed from management firmware during initialization in regard to the possible number of SBs doesn't accurately reflect the current HW configuration. The following changes are going to apply to the driver init sequence: a. PF is going to re-configure all entries belonging to itself and its child VFs in IGU CAM based on the management firmware info regarding the number of SBs that are supposed to exist there. b. PF is going to stop using the SB resource [management firmware provided information] for anything but the initialization. Instead, it would use the live-time counters it maintains for the numbers. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c index 1fff0473ddbb..939e85cc63a0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_dev.c +++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c @@ -2038,9 +2038,12 @@ static void get_function_id(struct qed_hwfn *p_hwfn) static void qed_hw_set_feat(struct qed_hwfn *p_hwfn) { u32 *feat_num = p_hwfn->hw_info.feat_num; - struct qed_sb_cnt_info sb_cnt_info; + struct qed_sb_cnt_info sb_cnt; u32 non_l2_sbs = 0; + memset(&sb_cnt, 0, sizeof(sb_cnt)); + qed_int_get_num_sbs(p_hwfn, &sb_cnt); + if (IS_ENABLED(CONFIG_QED_RDMA) && p_hwfn->hw_info.personality == QED_PCI_ETH_ROCE) { /* Roce CNQ each requires: 1 status block + 1 CNQ. We divide @@ -2048,7 +2051,7 @@ static void qed_hw_set_feat(struct qed_hwfn *p_hwfn) * consideration as to how many l2 queues / cnqs we have. */ feat_num[QED_RDMA_CNQ] = - min_t(u32, RESC_NUM(p_hwfn, QED_SB) / 2, + min_t(u32, sb_cnt.cnt / 2, RESC_NUM(p_hwfn, QED_RDMA_CNQ_RAM)); non_l2_sbs = feat_num[QED_RDMA_CNQ]; @@ -2057,14 +2060,11 @@ static void qed_hw_set_feat(struct qed_hwfn *p_hwfn) if (p_hwfn->hw_info.personality == QED_PCI_ETH_ROCE || p_hwfn->hw_info.personality == QED_PCI_ETH) { /* Start by allocating VF queues, then PF's */ - memset(&sb_cnt_info, 0, sizeof(sb_cnt_info)); - qed_int_get_num_sbs(p_hwfn, &sb_cnt_info); feat_num[QED_VF_L2_QUE] = min_t(u32, RESC_NUM(p_hwfn, QED_L2_QUEUE), - sb_cnt_info.iov_cnt); + sb_cnt.iov_cnt); feat_num[QED_PF_L2_QUE] = min_t(u32, - RESC_NUM(p_hwfn, QED_SB) - - non_l2_sbs, + sb_cnt.cnt - non_l2_sbs, RESC_NUM(p_hwfn, QED_L2_QUEUE) - FEAT_NUM(p_hwfn, @@ -2072,7 +2072,7 @@ static void qed_hw_set_feat(struct qed_hwfn *p_hwfn) } if (p_hwfn->hw_info.personality == QED_PCI_ISCSI) - feat_num[QED_ISCSI_CQ] = min_t(u32, RESC_NUM(p_hwfn, QED_SB), + feat_num[QED_ISCSI_CQ] = min_t(u32, sb_cnt.cnt, RESC_NUM(p_hwfn, QED_CMDQS_CQS)); DP_VERBOSE(p_hwfn, @@ -2082,7 +2082,7 @@ static void qed_hw_set_feat(struct qed_hwfn *p_hwfn) (int)FEAT_NUM(p_hwfn, QED_VF_L2_QUE), (int)FEAT_NUM(p_hwfn, QED_RDMA_CNQ), (int)FEAT_NUM(p_hwfn, QED_ISCSI_CQ), - RESC_NUM(p_hwfn, QED_SB)); + (int)sb_cnt.cnt); } const char *qed_hw_get_resc_name(enum qed_resources res_id) @@ -2201,7 +2201,6 @@ int qed_hw_get_dflt_resc(struct qed_hwfn *p_hwfn, { u8 num_funcs = p_hwfn->num_funcs_on_engine; bool b_ah = QED_IS_AH(p_hwfn->cdev); - struct qed_sb_cnt_info sb_cnt_info; switch (res_id) { case QED_L2_QUEUE: @@ -2253,9 +2252,10 @@ int qed_hw_get_dflt_resc(struct qed_hwfn *p_hwfn, *p_resc_num = 1; break; case QED_SB: - memset(&sb_cnt_info, 0, sizeof(sb_cnt_info)); - qed_int_get_num_sbs(p_hwfn, &sb_cnt_info); - *p_resc_num = sb_cnt_info.cnt; + /* Since we want its value to reflect whether MFW supports + * the new scheme, have a default of 0. + */ + *p_resc_num = 0; break; default: return -EINVAL; @@ -2324,11 +2324,6 @@ static int __qed_hw_set_resc_info(struct qed_hwfn *p_hwfn, goto out; } - /* Special handling for status blocks; Would be revised in future */ - if (res_id == QED_SB) { - *p_resc_num -= 1; - *p_resc_start -= p_hwfn->enabled_func_idx; - } out: /* PQs have to divide by 8 [that's the HW granularity]. * Reduce number so it would fit. @@ -2426,6 +2421,10 @@ static int qed_hw_get_resc(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) return -EINVAL; } + /* This will also learn the number of SBs from MFW */ + if (qed_int_igu_reset_cam(p_hwfn, p_ptt)) + return -EINVAL; + qed_hw_set_feat(p_hwfn); for (res_id = 0; res_id < QED_MAX_RESC; res_id++) diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index c9cad2e25dd8..719cdbfe1695 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -1853,6 +1853,140 @@ void qed_int_igu_init_pure_rt(struct qed_hwfn *p_hwfn, b_set); } +int qed_int_igu_reset_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) +{ + struct qed_igu_info *p_info = p_hwfn->hw_info.p_igu_info; + struct qed_igu_block *p_block; + int pf_sbs, vf_sbs; + u16 igu_sb_id; + u32 val, rval; + + if (!RESC_NUM(p_hwfn, QED_SB)) { + p_info->b_allow_pf_vf_change = false; + } else { + /* Use the numbers the MFW have provided - + * don't forget MFW accounts for the default SB as well. + */ + p_info->b_allow_pf_vf_change = true; + + if (p_info->usage.cnt != RESC_NUM(p_hwfn, QED_SB) - 1) { + DP_INFO(p_hwfn, + "MFW notifies of 0x%04x PF SBs; IGU indicates of only 0x%04x\n", + RESC_NUM(p_hwfn, QED_SB) - 1, + p_info->usage.cnt); + p_info->usage.cnt = RESC_NUM(p_hwfn, QED_SB) - 1; + } + + if (IS_PF_SRIOV(p_hwfn)) { + u16 vfs = p_hwfn->cdev->p_iov_info->total_vfs; + + if (vfs != p_info->usage.iov_cnt) + DP_VERBOSE(p_hwfn, + NETIF_MSG_INTR, + "0x%04x VF SBs in IGU CAM != PCI configuration 0x%04x\n", + p_info->usage.iov_cnt, vfs); + + /* At this point we know how many SBs we have totally + * in IGU + number of PF SBs. So we can validate that + * we'd have sufficient for VF. + */ + if (vfs > p_info->usage.free_cnt + + p_info->usage.free_cnt_iov - p_info->usage.cnt) { + DP_NOTICE(p_hwfn, + "Not enough SBs for VFs - 0x%04x SBs, from which %04x PFs and %04x are required\n", + p_info->usage.free_cnt + + p_info->usage.free_cnt_iov, + p_info->usage.cnt, vfs); + return -EINVAL; + } + + /* Currently cap the number of VFs SBs by the + * number of VFs. + */ + p_info->usage.iov_cnt = vfs; + } + } + + /* Mark all SBs as free, now in the right PF/VFs division */ + p_info->usage.free_cnt = p_info->usage.cnt; + p_info->usage.free_cnt_iov = p_info->usage.iov_cnt; + p_info->usage.orig = p_info->usage.cnt; + p_info->usage.iov_orig = p_info->usage.iov_cnt; + + /* We now proceed to re-configure the IGU cam to reflect the initial + * configuration. We can start with the Default SB. + */ + pf_sbs = p_info->usage.cnt; + vf_sbs = p_info->usage.iov_cnt; + + for (igu_sb_id = p_info->igu_dsb_id; + igu_sb_id < QED_MAPPING_MEMORY_SIZE(p_hwfn->cdev); igu_sb_id++) { + p_block = &p_info->entry[igu_sb_id]; + val = 0; + + if (!(p_block->status & QED_IGU_STATUS_VALID)) + continue; + + if (p_block->status & QED_IGU_STATUS_DSB) { + p_block->function_id = p_hwfn->rel_pf_id; + p_block->is_pf = 1; + p_block->vector_number = 0; + p_block->status = QED_IGU_STATUS_VALID | + QED_IGU_STATUS_PF | + QED_IGU_STATUS_DSB; + } else if (pf_sbs) { + pf_sbs--; + p_block->function_id = p_hwfn->rel_pf_id; + p_block->is_pf = 1; + p_block->vector_number = p_info->usage.cnt - pf_sbs; + p_block->status = QED_IGU_STATUS_VALID | + QED_IGU_STATUS_PF | + QED_IGU_STATUS_FREE; + } else if (vf_sbs) { + p_block->function_id = + p_hwfn->cdev->p_iov_info->first_vf_in_pf + + p_info->usage.iov_cnt - vf_sbs; + p_block->is_pf = 0; + p_block->vector_number = 0; + p_block->status = QED_IGU_STATUS_VALID | + QED_IGU_STATUS_FREE; + vf_sbs--; + } else { + p_block->function_id = 0; + p_block->is_pf = 0; + p_block->vector_number = 0; + } + + SET_FIELD(val, IGU_MAPPING_LINE_FUNCTION_NUMBER, + p_block->function_id); + SET_FIELD(val, IGU_MAPPING_LINE_PF_VALID, p_block->is_pf); + SET_FIELD(val, IGU_MAPPING_LINE_VECTOR_NUMBER, + p_block->vector_number); + + /* VF entries would be enabled when VF is initializaed */ + SET_FIELD(val, IGU_MAPPING_LINE_VALID, p_block->is_pf); + + rval = qed_rd(p_hwfn, p_ptt, + IGU_REG_MAPPING_MEMORY + sizeof(u32) * igu_sb_id); + + if (rval != val) { + qed_wr(p_hwfn, p_ptt, + IGU_REG_MAPPING_MEMORY + + sizeof(u32) * igu_sb_id, val); + + DP_VERBOSE(p_hwfn, + NETIF_MSG_INTR, + "IGU reset: [SB 0x%04x] func_id = %d is_pf = %d vector_num = 0x%x [%08x -> %08x]\n", + igu_sb_id, + p_block->function_id, + p_block->is_pf, + p_block->vector_number, rval, val); + } + } + + return 0; +} + static void qed_int_igu_read_cam_block(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, u16 igu_sb_id) { @@ -1919,7 +2053,7 @@ int qed_int_igu_read_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) } /* Mark the First entry belonging to the PF or its VFs - * as the default SB. + * as the default SB [we'll reset IGU prior to first usage]. */ if ((p_block->status & QED_IGU_STATUS_VALID) && (p_igu_info->igu_dsb_id == QED_SB_INVALID_IDX)) { @@ -1952,7 +2086,7 @@ int qed_int_igu_read_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) p_igu_info->usage.free_cnt_iov = p_igu_info->usage.iov_cnt; DP_VERBOSE(p_hwfn, NETIF_MSG_INTR, - "igu_dsb_id=0x%x, num Free SBs - PF: %04x VF: %04x\n", + "igu_dsb_id=0x%x, num Free SBs - PF: %04x VF: %04x [might change after resource allocation]\n", p_igu_info->igu_dsb_id, p_igu_info->usage.cnt, p_igu_info->usage.iov_cnt); diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h index bc61c5013b6e..5199634ed630 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.h +++ b/drivers/net/ethernet/qlogic/qed/qed_int.h @@ -224,8 +224,17 @@ struct qed_igu_info { struct qed_sb_cnt_info usage; + bool b_allow_pf_vf_change; }; +/** + * @brief - Make sure the IGU CAM reflects the resources provided by MFW + * + * @param p_hwfn + * @param p_ptt + */ +int qed_int_igu_reset_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt); + /** * @brief Translate the weakly-defined client sb-id into an IGU sb-id *