From: Piotr Dymacz Date: Fri, 7 Oct 2016 23:17:04 +0000 (+0200) Subject: ar71xx: add support for YunCore CPE870 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc;p=openwrt%2Fstaging%2Flynxis.git ar71xx: add support for YunCore CPE870 YunCore CPE870 is an outdoor CPE/AP based on Atheros AR9341. Short specification: - 535/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SKY65174-21), up to 30 dBm - internal 14 dBi panel antenna - 8x LED, 1x button - UART (JP1) header on PCB Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-cpe870-squashfs-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. setenv bootcmd "bootm 0x9f020000" 5. saveenv && reset Vendor firmware access (login/password): Admin/5up Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index c348b4fbda..2cf72d61d3 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -58,6 +58,7 @@ ap147-010) ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt" ;; ap90q|\ +cpe870|\ dr531) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" @@ -66,6 +67,14 @@ dr531) ap90q) ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" ;; + cpe870) + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:link1" "wlan0" "1" "100" "0" "13" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:link2" "wlan0" "26" "100" "-25" "13" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:link3" "wlan0" "51" "100" "-50" "13" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:link4" "wlan0" "76" "100" "-75" "13" + ;; esac ;; bhr-4grv2) diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 0ef5a52a05..e619749609 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -48,6 +48,7 @@ get_status_led() { status_led="$board:green:power" ;; ap90q|\ + cpe870|\ gl-inet) status_led="$board:green:lan" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 16ee2eb578..0d4c1e0a49 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -526,6 +526,9 @@ ar71xx_board_detect() { name="cpe510" tplink_pharos_board_detect ;; + *CPE870) + name="cpe870" + ;; *CR3000) name="cr3000" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 697b786937..66f630884f 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -188,6 +188,7 @@ platform_check_image() { cf-e380ac-v2|\ cf-e520n|\ cf-e530n|\ + cpe870|\ dgl-5500-a1|\ dhp-1565-a1|\ dir-505-a1|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 471a44d056..794e7f809c 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -69,6 +69,7 @@ CONFIG_ATH79_MACH_CF_E380AC_V2=y CONFIG_ATH79_MACH_CF_E520N=y CONFIG_ATH79_MACH_CF_E530N=y CONFIG_ATH79_MACH_CPE510=y +CONFIG_ATH79_MACH_CPE870=y CONFIG_ATH79_MACH_CR3000=y CONFIG_ATH79_MACH_CR5000=y CONFIG_ATH79_MACH_DAP_2695_A1=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index e9431f139e..6daa093a01 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1211,6 +1211,15 @@ config ATH79_MACH_CPE510 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_CPE870 + bool "YunCore CPE870 support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_TL_MR11U bool "TP-LINK TL-MR11U/TL-MR3040 support" select SOC_AR933X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index c0caccdb23..b718d6bfd3 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -75,6 +75,7 @@ obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o +obj-$(CONFIG_ATH79_MACH_CPE870) += mach-cpe870.o obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o obj-$(CONFIG_ATH79_MACH_DAP_2695_A1) += mach-dap-2695-a1.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c new file mode 100644 index 0000000000..284cdc71c2 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c @@ -0,0 +1,152 @@ +/* + * YunCore CPE870 board support + * + * Copyright (C) 2016 Piotr Dymacz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define CPE870_GPIO_LED_LINK1 0 +#define CPE870_GPIO_LED_LINK2 1 +#define CPE870_GPIO_LED_LINK3 2 +#define CPE870_GPIO_LED_LINK4 3 +#define CPE870_GPIO_LED_WLAN 13 +#define CPE870_GPIO_LED_WAN 19 +#define CPE870_GPIO_LED_LAN 20 + +#define CPE870_GPIO_BTN_RESET 16 + +#define CPE870_KEYS_POLL_INTERVAL 20 +#define CPE870_KEYS_DEBOUNCE_INTERVAL (3 * CPE870_KEYS_POLL_INTERVAL) + +static struct gpio_led cpe870_leds_gpio[] __initdata = { + { + .name = "cpe870:green:lan", + .gpio = CPE870_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "cpe870:green:wan", + .gpio = CPE870_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "cpe870:green:wlan", + .gpio = CPE870_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "cpe870:green:link1", + .gpio = CPE870_GPIO_LED_LINK1, + .active_low = 1, + }, + { + .name = "cpe870:green:link2", + .gpio = CPE870_GPIO_LED_LINK2, + .active_low = 1, + }, + { + .name = "cpe870:green:link3", + .gpio = CPE870_GPIO_LED_LINK3, + .active_low = 1, + }, + { + .name = "cpe870:green:link4", + .gpio = CPE870_GPIO_LED_LINK4, + .active_low = 1, + }, +}; + +static struct gpio_keys_button cpe870_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = CPE870_KEYS_DEBOUNCE_INTERVAL, + .gpio = CPE870_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static void __init cpe870_gpio_setup(void) +{ + /* Disable JTAG (enables GPIO0-3) */ + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); + + ath79_gpio_direction_select(CPE870_GPIO_LED_LINK1, true); + ath79_gpio_direction_select(CPE870_GPIO_LED_LINK2, true); + ath79_gpio_direction_select(CPE870_GPIO_LED_LINK3, true); + ath79_gpio_direction_select(CPE870_GPIO_LED_LINK4, true); + + /* Mute LEDs on boot */ + gpio_set_value(CPE870_GPIO_LED_LAN, 1); + gpio_set_value(CPE870_GPIO_LED_WAN, 1); + gpio_set_value(CPE870_GPIO_LED_LINK1, 1); + gpio_set_value(CPE870_GPIO_LED_LINK2, 1); + gpio_set_value(CPE870_GPIO_LED_LINK3, 1); + gpio_set_value(CPE870_GPIO_LED_LINK4, 1); + + ath79_gpio_output_select(CPE870_GPIO_LED_LINK1, 0); + ath79_gpio_output_select(CPE870_GPIO_LED_LINK2, 0); + ath79_gpio_output_select(CPE870_GPIO_LED_LINK3, 0); + ath79_gpio_output_select(CPE870_GPIO_LED_LINK4, 0); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe870_leds_gpio), + cpe870_leds_gpio); + + ath79_register_gpio_keys_polled(-1, CPE870_KEYS_POLL_INTERVAL, + ARRAY_SIZE(cpe870_gpio_keys), + cpe870_gpio_keys); +} + +static void __init cpe870_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff1000); + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + cpe870_gpio_setup(); + + ath79_register_mdio(1, 0x0); + + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + + /* LAN */ + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); + ath79_register_eth(1); + + /* WAN */ + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_register_eth(0); + + ath79_register_wmac(art, NULL); +} + +MIPS_MACHINE(ATH79_MACH_CPE870, "CPE870", "YunCore CPE870", cpe870_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index e69cf3bece..50ecff46f5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -61,6 +61,7 @@ enum ath79_mach_type { ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */ ATH79_MACH_CPE210, /* TP-LINK CPE210 */ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ + ATH79_MACH_CPE870, /* YunCore CPE870 */ ATH79_MACH_CR3000, /* PowerCloud CR3000 */ ATH79_MACH_CR5000, /* PowerCloud CR5000 */ ATH79_MACH_DAP_2695_A1, /* D-Link DAP-2695 rev. A1 */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 0c32cddfdd..0b8a216a25 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -80,6 +80,16 @@ define Device/cf-e530n endef TARGET_DEVICES += cf-e530n +define Device/cpe870 + DEVICE_TITLE := YunCore CPE870 + DEVICE_PACKAGES := rssileds + BOARDNAME = CPE870 + IMAGE_SIZE = 7936k + CONSOLE = ttyS0,115200 + MTDPARTS = spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro +endef +TARGET_DEVICES += cpe870 + define Device/domywifi-dw33d DEVICE_TITLE := DomyWifi DW33D DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-ledtrig-usbdev kmod-ath10k