From: dissent1 Date: Mon, 26 Sep 2016 19:18:37 +0000 (-0400) Subject: ipq806x: update Netgear R7800 device tree X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eb7307cb943bfe4f10fa2f77abbe71dfcbbb3601;p=openwrt%2Fstaging%2Fdedeckeh.git ipq806x: update Netgear R7800 device tree -add spi pins -move mdio and rgmii pinctrl from gmac and mdio into pinmux node -add i2c4 pinctrl into rpm node -add pin details into several nodes -update gmac1 and gmac2 parameters -update mdio phy0 and phy4 registers by ddwrt devs findings -fix i2c4 pin drive-strengh -remove pcie pins as it's already present in ipq8065 DT Signed-off-by: Pavel Kubelun --- diff --git a/target/linux/ipq806x/config-4.4 b/target/linux/ipq806x/config-4.4 index c410fb65af..bc040497cb 100644 --- a/target/linux/ipq806x/config-4.4 +++ b/target/linux/ipq806x/config-4.4 @@ -301,6 +301,7 @@ CONFIG_NO_HZ=y CONFIG_NO_HZ_COMMON=y CONFIG_NO_HZ_IDLE=y CONFIG_NR_CPUS=4 +CONFIG_NVMEM=y CONFIG_OF=y CONFIG_OF_ADDRESS=y CONFIG_OF_ADDRESS_PCI=y @@ -372,6 +373,7 @@ CONFIG_QCOM_GDSC=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_HFPLL=y # CONFIG_QCOM_PM is not set +CONFIG_QCOM_QFPROM=y CONFIG_QCOM_SCM=y CONFIG_QCOM_SCM_32=y # CONFIG_QCOM_SMD is not set diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts index 52ca92a47f..d4ccab47fc 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-r7800.dts @@ -33,25 +33,13 @@ soc { pinmux@800000 { - i2c4_pins: i2c4_pinmux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - bias-disable; - }; - - pcie0_pins: pcie0_pinmux { - mux { - pins = "gpio3"; - function = "pcie1_rst"; - drive-strength = <12>; - bias-disable; - }; - }; + pinctrl-0 = <&mdio0_pins &rgmii2_pins>; + pinctrl-names = "default"; - pcie1_pins: pcie1_pinmux { + i2c4_pins: i2c4_pinmux { mux { - pins = "gpio48"; - function = "pcie2_rst"; + pins = "gpio12", "gpio13"; + function = "gsbi4"; drive-strength = <12>; bias-disable; }; @@ -87,6 +75,11 @@ drive-strength = <8>; bias-disable; }; + + clk { + pins = "gpio1"; + input-disable; + }; }; rgmii2_pins: rgmii2_pins { @@ -97,6 +90,25 @@ drive-strength = <8>; bias-disable; }; + + tx { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; + input-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + + cs { + pins = "gpio20"; + drive-strength = <12>; + }; }; }; @@ -114,6 +126,30 @@ */ }; + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl512s"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <51200000>; + reg = <0>; + + linux,part-probe = "qcom-smem"; + }; + }; + }; + sata-phy@1b400000 { status = "ok"; }; @@ -236,8 +272,6 @@ #address-cells = <1>; #size-cells = <0>; gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; phy0: ethernet-phy@0 { device_type = "ethernet-phy"; @@ -246,16 +280,34 @@ 0x00004 0x7600000 /* PAD0_MODE */ 0x00008 0x1000000 /* PAD5_MODE */ 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ 0x000e0 0xc74164de /* SGMII_CTRL */ 0x0007c 0x4e /* PORT0_STATUS */ 0x00094 0x4e /* PORT6_STATUS */ + 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ + 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ + 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ + 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ + 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ + 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ + 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ + 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ + 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ + 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ + 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ + 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ + 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ + 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ >; }; phy4: ethernet-phy@4 { device_type = "ethernet-phy"; reg = <4>; + qca,ar8327-initvals = < + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x0000c 0x80 /* PAD6_MODE */ + >; }; }; @@ -263,9 +315,13 @@ status = "ok"; phy-mode = "rgmii"; qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <0>; + qcom,rgmii_delay = <1>; + qcom,phy_mii_type = <0>; + qcom,emulation = <0>; + qcom,irq = <255>; + mdiobus = <&mdio0>; mtd-mac-address = <&art 6>; @@ -279,6 +335,13 @@ status = "ok"; phy-mode = "sgmii"; qcom,id = <2>; + qcom,phy_mdio_addr = <0>; /* none */ + qcom,poll_required = <0>; /* no polling */ + qcom,rgmii_delay = <0>; + qcom,phy_mii_type = <1>; + qcom,emulation = <0>; + qcom,irq = <258>; + mdiobus = <&mdio0>; mtd-mac-address = <&art 0>; @@ -287,6 +350,11 @@ full-duplex; }; }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; }; gpio-keys { diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi index 4571ef4934..42281c4d54 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -2,6 +2,7 @@ #include "skeleton.dtsi" #include +#include #include #include #include @@ -27,6 +28,7 @@ qcom,saw = <&saw0>; clocks = <&kraitcc 0>; clock-names = "cpu"; + qcom,imem = <&imem>; clock-latency = <100000>; core-supply = <&smb208_s2a>; voltage-tolerance = <5>; @@ -109,8 +111,12 @@ qcom,saw = <&saw1>; clocks = <&kraitcc 1>; clock-names = "cpu"; + qcom,imem = <&imem>; clock-latency = <100000>; core-supply = <&smb208_s2b>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; operating-points-0-0 = < /* kHz uV */ @@ -175,9 +181,6 @@ 600000 800000 384000 775000 >; - cooling-min-state = <0>; - cooling-max-state = <10>; - #cooling-cells = <2>; }; L2: l2-cache { @@ -288,11 +291,27 @@ ranges; compatible = "simple-bus"; + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = <0 85 1>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + imem: memory@700000 { - compatible = "qcom,imem-ipq8064", "syscon"; + compatible = "qcom,qfprom", "syscon"; reg = <0x00700000 0x1000>; #address-cells = <1>; #size-cells = <1>; + stride = <1>; ranges = <0x0 0x00700000 0x1000>; }; @@ -311,99 +330,74 @@ #address-cells = <1>; #size-cells = <0>; - smb208_s1a: smb208-s1a { - compatible = "qcom,rpm-smb208"; - reg = ; - - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1150000>; - - qcom,switch-mode-frequency = <1200000>; - - }; - - smb208_s1b: smb208-s1b { - compatible = "qcom,rpm-smb208"; - reg = ; - - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1150000>; - - qcom,switch-mode-frequency = <1200000>; - }; - - smb208_s2a: smb208-s2a { - compatible = "qcom,rpm-smb208"; - reg = ; + smb208_regulators { + compatible = "qcom,rpm-smb208-regulators"; - regulator-min-microvolt = < 800000>; - regulator-max-microvolt = <1275000>; - - qcom,switch-mode-frequency = <1400000>; - }; + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <1200000>; + }; - smb208_s2b: smb208-s2b { - compatible = "qcom,rpm-smb208"; - reg = ; + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <1200000>; + }; - regulator-min-microvolt = < 800000>; - regulator-max-microvolt = <1275000>; + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1275000>; + qcom,switch-mode-frequency = <1200000>; + }; - qcom,switch-mode-frequency = <1400000>; + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1275000>; + qcom,switch-mode-frequency = <1200000>; + }; }; - cxo_clk: cxo-clk { + rpm_clocks { #clock-cells = <0>; compatible = "qcom,rpm-clk"; - reg = ; - qcom,rpm-clk-name = "cxo"; - qcom,rpm-clk-freq = <25000000>; qcom,rpm-clk-active-only; - }; - pxo_clk: pxo-clk { - #clock-cells = <0>; - compatible = "qcom,rpm-clk"; - reg = ; - qcom,rpm-clk-name = "pxo"; - qcom,rpm-clk-freq = <25000000>; - qcom,rpm-clk-active-only; - }; + cxo_clk: cxo { + reg = ; + qcom,rpm-clk-name = "cxo"; + qcom,rpm-clk-freq = <25000000>; + }; - ebi1_clk: ebi1-clk { - #clock-cells = <0>; - compatible = "qcom,rpm-clk"; - reg = ; - qcom,rpm-clk-name = "ebi1"; - qcom,rpm-clk-freq = <533000000>; - qcom,rpm-clk-active-only; - }; + pxo_clk: pxo { + reg = ; + qcom,rpm-clk-name = "pxo"; + qcom,rpm-clk-freq = <25000000>; + }; - apps_fabric_clk: apps-fabric-clk { - #clock-cells = <0>; - compatible = "qcom,rpm-clk"; - reg = ; - qcom,rpm-clk-name = "apps-fabric"; - qcom,rpm-clk-freq = <533000000>; - qcom,rpm-clk-active-only; - }; + ebi1_clk: ebi1 { + reg = ; + qcom,rpm-clk-name = "ebi1"; + qcom,rpm-clk-freq = <533000000>; + }; - nss_fabric0_clk: nss-fabric0-clk { - #clock-cells = <0>; - compatible = "qcom,rpm-clk"; - reg = ; - qcom,rpm-clk-name = "nss-fabric0"; - qcom,rpm-clk-freq = <533000000>; - qcom,rpm-clk-active-only; - }; + apps_fabric_clk: apps-fabric { + reg = ; + qcom,rpm-clk-name = "apps-fabric"; + qcom,rpm-clk-freq = <533000000>; + }; - nss_fabric1_clk: nss-fabric1-clk { - #clock-cells = <0>; - compatible = "qcom,rpm-clk"; - reg = ; - qcom,rpm-clk-name = "nss-fabric1"; - qcom,rpm-clk-freq = <266000000>; - qcom,rpm-clk-active-only; + nss_fabric0_clk: nss-fabric0 { + reg = ; + qcom,rpm-clk-name = "nss-fabric0"; + qcom,rpm-clk-freq = <533000000>; + }; + + nss_fabric1_clk: nss-fabric1 { + reg = ; + qcom,rpm-clk-name = "nss-fabric1"; + qcom,rpm-clk-freq = <266000000>; + }; }; }; @@ -445,7 +439,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 32 0x4>; + interrupts = <0 16 0x4>; pcie0_pins: pcie0_pinmux { mux { @@ -528,6 +522,44 @@ regulator; }; + gsbi1: gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <1>; + reg = <0x12440000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart1: serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x1000>, + <0x12440000 0x1000>; + interrupts = <0 193 0x0>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + interrupts = <0 194 0>; + + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + gsbi2: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <2>; @@ -653,6 +685,94 @@ }; }; + gsbi6: gsbi@16500000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <6>; + reg = <0x16500000 0x100>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart6: serial@16540000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16540000 0x1000>, + <0x16500000 0x1000>; + interrupts = <0 156 0x0>; + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16580000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <0 157 0>; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@16580000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16580000 0x1000>; + interrupts = <0 157 0>; + + clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi7: gsbi@16600000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <7>; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart7: serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <0 158 0x0>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16680000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16680000 0x1000>; + interrupts = <0 159 0>; + + clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + sata_phy: sata-phy@1b400000 { compatible = "qcom,ipq806x-sata-phy"; reg = <0x1b400000 0x200>; @@ -699,6 +819,13 @@ #reset-cells = <1>; }; + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + tcsr: syscon@1a400000 { compatible = "qcom,tcsr-ipq8064", "syscon"; reg = <0x1a400000 0x100>; @@ -1021,7 +1148,7 @@ gmac0: ethernet@37000000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37000000 0x200000>; interrupts = ; interrupt-names = "macirq"; @@ -1040,7 +1167,7 @@ gmac1: ethernet@37200000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37200000 0x200000>; interrupts = ; interrupt-names = "macirq"; @@ -1059,7 +1186,7 @@ gmac2: ethernet@37400000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37400000 0x200000>; interrupts = ; interrupt-names = "macirq"; @@ -1078,7 +1205,7 @@ gmac3: ethernet@37600000 { device_type = "network"; - compatible = "qcom,ipq806x-gmac"; + compatible = "qcom,ipq806x-gmac", "snps,dwmac"; reg = <0x37600000 0x200000>; interrupts = ; interrupt-names = "macirq"; diff --git a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch index 17596b451a..a3a0583f29 100644 --- a/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch +++ b/target/linux/ipq806x/patches-4.4/168-ARM-qcom-add-smb208-DT.patch @@ -72,73 +72,3 @@ Signed-off-by: Adrian Panella }; }; ---- a/arch/arm/boot/dts/qcom-ipq8065.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi -@@ -311,45 +311,37 @@ - #address-cells = <1>; - #size-cells = <0>; - -- smb208_s1a: smb208-s1a { -- compatible = "qcom,rpm-smb208"; -- reg = ; -+ regulators { -+ compatible = "qcom,rpm-smb208-regulators"; - -- regulator-min-microvolt = <1050000>; -- regulator-max-microvolt = <1150000>; -+ smb208_s1a: s1a { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; - -- qcom,switch-mode-frequency = <1200000>; -+ qcom,switch-mode-frequency = <1200000>; - -- }; -- -- smb208_s1b: smb208-s1b { -- compatible = "qcom,rpm-smb208"; -- reg = ; -- -- regulator-min-microvolt = <1050000>; -- regulator-max-microvolt = <1150000>; -+ }; - -- qcom,switch-mode-frequency = <1200000>; -- }; -- -- smb208_s2a: smb208-s2a { -- compatible = "qcom,rpm-smb208"; -- reg = ; -+ smb208_s1b: s1b { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; - -- regulator-min-microvolt = < 800000>; -- regulator-max-microvolt = <1275000>; -+ qcom,switch-mode-frequency = <1200000>; -+ }; - -- qcom,switch-mode-frequency = <1400000>; -- }; -+ smb208_s2a: s2a { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1275000>; - -- smb208_s2b: smb208-s2b { -- compatible = "qcom,rpm-smb208"; -- reg = ; -+ qcom,switch-mode-frequency = <1200000>; -+ }; - -- regulator-min-microvolt = < 800000>; -- regulator-max-microvolt = <1275000>; -+ smb208_s2b: s2b { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1275000>; - -- qcom,switch-mode-frequency = <1400000>; -+ qcom,switch-mode-frequency = <1200000>; -+ }; - }; - - cxo_clk: cxo-clk {