From: Fabio Estevam Date: Tue, 4 Jun 2019 18:49:42 +0000 (-0300) Subject: can: flexcan: Remove unneeded registration message X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eb503004a7e563d543c9cb869907156de7efe720;p=openwrt%2Fstaging%2Fblogic.git can: flexcan: Remove unneeded registration message Currently the following message is observed when the flexcan driver is probed: flexcan 2090000.flexcan: device registered (reg_base=(ptrval), irq=23) The reason for printing 'ptrval' is explained at Documentation/core-api/printk-formats.rst: "Pointers printed without a specifier extension (i.e unadorned %p) are hashed to prevent leaking information about the kernel memory layout. This has the added benefit of providing a unique identifier. On 64-bit machines the first 32 bits are zeroed. The kernel will print ``(ptrval)`` until it gathers enough entropy." Instead of passing %pK, which can print the correct address, simply remove the entire message as it is not really that useful. Signed-off-by: Fabio Estevam Signed-off-by: Marc Kleine-Budde --- diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index f97c628eb2ad..f2fe344593d5 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1583,9 +1583,6 @@ static int flexcan_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "failed to setup stop-mode\n"); } - dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n", - priv->regs, dev->irq); - return 0; failed_register: