From: Sergio Paracuellos Date: Sun, 4 Apr 2021 06:50:26 +0000 (+0200) Subject: ramips: add support for HiLink HLK-7621A evaluation board X-Git-Tag: v22.03.0-rc1~1397 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eb00fb8f7153535512b2dad365e76a2bc0dfb6c1;p=openwrt%2Fopenwrt.git ramips: add support for HiLink HLK-7621A evaluation board Specifications: - SoC: MediaTek MT7621AT - RAM: 256 MB (DDR3) - Flash: 32 MB SPI NOR 44MHz - Switch: 1 WAN, 4 LAN (Gigabit) - LEDs: 1 WAN, 4 LAN (controlled by PHY) - USB Ports: 1 x USB2, 1 x USB3 - WLAN: 1 x 2.4, 5 GHz 866Mbps (MT7612E) - Button: 1 button (reset) - UART Serial: UART1 as console : 57600 baud - Power: 12VDC, 1A Installation: Update openWRT firmware using internal GNUBEE uboot: https://github.com/gnubee-git/GnuBee-MT7621-uboot By HTTP: Initial uboot address is http://10.10.10.123, your address needs to be 10.10.10.x, and mask 255.255.255.0. By TFTP: Uboot is in client mode, the address of the firmware must be tftp://10.10.10.3/uboot.bin Recovery: Manufacturer provides MTK OpenWrt 14.07 source code, compile then flash it by uboot. HLK-7621A is a stamp hole package module for embedded development, users have to design IO boards to use it. MAC addresses: - u-boot-env contains a placeholder address: > mtd_get_mac_ascii u-boot-env ethaddr 03:17:73:ab:cd:ef - phy0 gets a valid-looking address: > cat /sys/class/ieee80211/phy0/macaddress f8:62:aa:**:**:a8 - Calibration data for &pcie2 contains a valid address, however the zeros in the right half look like it's not real: 8c:88:2b:00:00:1b - Since it's an evaluation board and there is no solid information about the MAC address assignment, the ethernet MAC address is left random. Signed-off-by: Chen Yijun [add keys and pcie nodes to properly support evaluation board] Signed-off-by: Sergio Paracuellos [remove ethernet address, wrap lines properly] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/dts/mt7621_hilink_hlk-7621a-evb.dts b/target/linux/ramips/dts/mt7621_hilink_hlk-7621a-evb.dts new file mode 100644 index 0000000000..4b807fcaa5 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_hilink_hlk-7621a-evb.dts @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "hilink,hlk-7621a-evb", "mediatek,mt7621-soc"; + model = "HiLink HLK-7621A evaluation board"; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <44000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan1"; + }; + + port@1 { + status = "okay"; + label = "lan2"; + }; + + port@2 { + status = "okay"; + label = "lan3"; + }; + + port@3 { + status = "okay"; + label = "lan4"; + }; + + port@4 { + status = "okay"; + label = "wan"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie2 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + }; +}; + +&state_default { + gpio { + groups = "wdt"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index a0236234d1..3b68a76b3e 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -610,6 +610,16 @@ define Device/gnubee_gb-pc2 endef TARGET_DEVICES += gnubee_gb-pc2 +define Device/hilink_hlk-7621a-evb + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + DEVICE_VENDOR := HiLink + DEVICE_MODEL := HLK-7621A evaluation board + DEVICE_PACKAGES += kmod-mt76x2 kmod-usb3 + IMAGE_SIZE := 32448k +endef +TARGET_DEVICES += hilink_hlk-7621a-evb + define Device/hiwifi_hc5962 $(Device/dsa-migration) BLOCKSIZE := 128k