From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Fri, 24 Nov 2017 15:25:32 +0000 (+0900)
Subject: ARM: uniphier: remove IRQ settings
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=eadd95a97e60cca6165142a8774d7840f015a5d7;p=project%2Fbcm63xx%2Fu-boot.git

ARM: uniphier: remove IRQ settings

This work-around has been here in U-Boot because the AIDET and GPIO
drivers were missing in the upstream Linux.  Both are now available
in Linus' tree:
  - drivers/irqchip/irq-uniphier-aidet.c
  - drivers/gpio/gpio-uniphier.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index a6ee22e339..28784ea631 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -17,37 +17,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static void uniphier_setup_xirq(void)
-{
-	const void *fdt = gd->fdt_blob;
-	int soc_node, aidet_node;
-	const fdt32_t *val;
-	unsigned long aidet_base;
-	u32 tmp;
-
-	soc_node = fdt_path_offset(fdt, "/soc");
-	if (soc_node < 0)
-		return;
-
-	aidet_node = fdt_subnode_offset_namelen(fdt, soc_node, "aidet", 5);
-	if (aidet_node < 0)
-		return;
-
-	val = fdt_getprop(fdt, aidet_node, "reg", NULL);
-	if (!val)
-		return;
-
-	aidet_base = fdt32_to_cpu(*val);
-
-	tmp = readl(aidet_base + 8);	/* AIDET DETCONFR2 */
-	tmp |= 0x00ff0000;		/* Set XIRQ0-7 low active */
-	writel(tmp, aidet_base + 8);
-
-	tmp = readl(0x55000090);	/* IRQCTL */
-	tmp |= 0x000000ff;
-	writel(tmp, 0x55000090);
-}
-
 #ifdef CONFIG_ARCH_UNIPHIER_LD11
 static void uniphier_ld11_misc_init(void)
 {
@@ -192,10 +161,6 @@ int board_init(void)
 
 	led_puts("U3");
 
-	uniphier_setup_xirq();
-
-	led_puts("U4");
-
 	support_card_late_init();
 
 	led_puts("Uboo");